High Video Bitrate Deployer

<!doctype html>

<html lang="en">
<head>
  <meta charset="utf-8">

  <title>High Bitrate Video Deployer</title>

</head>

<body>
  <style type="text/css">
    *{
      text-align: center;
    }
    p{
      width: 50%;
      margin:auto;
      padding:20px;
    }
    hr{
      width:30%;
    }
    a{
      font-size:18pt;
    }
    .handshake{
      color: #f54242;
    }
    .pal{
      color: #49a7cc;
    }
    .ntsc{
      color: #49cc68;
    }
    @media only screen and (max-width: 600px) {
      p{
        width: 90%;
      }
    }

  </style>

  <h1>High Bitrate Video Deployer</h1>
  <p>
    This script may be used to access hidden video quality settings in
     Lumix GX9 camera. Make sure to activate the cameras WIFI and connect it to your device
     before proceeding. Always open the commands in a new tab, so you keep access to this page!
  </p>
  <p>
    <b>Use at your own risk.</b><br>All changes should be revertable.<br>Tested on FW 1.5.
  </p>
  <hr>

  <h2>1. Handshake & Connect</h2>
  <p>
    First we need to establish a connection by sending a handshake and a connection command
    to the camera. Sequentially execute the <b class="handshake">orange</b> commands.
  </p>
  <a href="http://192.168.54.1:80/cam.cgi?mode=accctrl&type=req_acc&value=4D454930-0100-1000-8001-020000025AD6&value2=iPhone" class="handshake"><b>cmd</b> send handshake part 1</a>
  <br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=accctrl&type=req_acc&value=4D454930-0100-1000-8001-020000025AD6&value2=iPhone" class="handshake"><b>cmd</b> send handshake part 2</a>
  <br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=camcmd&value=recmode" class="handshake"><b>cmd</b> establish connection</a>
  <br>
  <p>
    The camera might tell you that it is not connected to the app. Which is no problem as long
    you get no "err" messages returned.
  </p>
  <hr>

  <h2>2. Deploy Video Setting</h2>
  <p>
    Depending on the wanted setting the following cmds are available.
    If your camera is set to PAL mode (25p,50p modes) use the <b class="pal">blue</b> commands, if
    it set to NTSC mode (30p,60p modes) use the <b class="ntsc">green</b> commands.
  </p>
  <p>
    Recording seems stable up to 100mbps. File analysis showed that the 100mbps even achieves a higher actual bitrate
    when compared to the 200mbps setting (Note: targeted bitrate and achieved bitrate are usually different).
  </p>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_25p_100mbps_4k" class="pal"><b>cmd</b> set mov_25p_100mbps_4k</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_50p_50mbps" class="pal"><b>cmd</b> set mov_50p_50mbps</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_50p_100mbps" class="pal"><b>cmd</b> set mov_50p_100mbps</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_50p_200mbps" class="pal"><b>cmd</b> set mov_50p_200mbps</a><br>
  <p></p>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_24p_100mbps_4k" class="ntsc"><b>cmd</b> set mov_24p_100mbps_4k</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_60p_50mbps" class="ntsc"><b>cmd</b> set mov_60p_50mbps</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_60p_100mbps" class="ntsc"><b>cmd</b> set mov_60p_100mbps</a><br>
  <a href="http://192.168.54.1:80/cam.cgi?mode=setsetting&type=videoquality&value=mov_60p_200mbps" class="ntsc"><b>cmd</b> set mov_60p_200mbps</a><br>
  <p>
    If the settings are properly transmitted, the camera will respond with "ok".
    Since it does not officially support the *.mov format, it won't show a symbol
    for the current video quality (i.e. MP4_4k_30p).
  </p>
  <br>
  <hr>

  <h2>3. Save & Revert</h2>
  <p>
    Save the current setting to a custom mode (C1,C2 or C3) in camera to keep
    the video quality set. Simply enter the Q-Menu on camera an touch a standart video quality,
    if you want to revert to a standart setting. You will need this script or a custom mode to return to the hidden video qualities.
  </p>

</body>

</html>