Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
- [ 0.000000] Linux version 5.17.0-rc5-00312-g9d197fd3e27e-dirty (andy@B150) (aarch64-linux-gnu-gcc (Linaro GCC 6.3-2017.05) 6.3.1 20170404, GNU ld (Linaro_Binutils-2017.05) 2.27.0.2
- 0161019) #114 SMP PREEMPT Tue Mar 8 15:40:15 CST 2022
- [ 0.000000] Machine model: Rockchip RK3568 EVB1 DDR4 V10 Board
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x7fbc0b40-0x7fbc2fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
- [ 0.000000] node 0: [mem 0x0000000009400000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
- [ 0.000000] cma: Reserved 32 MiB at 0x000000007b800000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 19 pages/cpu s40664 r8192 d28968 u77824
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Virtualization Host Extensions
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] alternatives: patching kernel code
- [ 0.000000] Fallback order for Node 0: 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511496
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange androidboot.serialno=DWEZQP0MXY
- [ 0.000000] Unknown kernel command line parameters "storagemedia=emmc", will be passed to user space.
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1956968K/2078720K available (12672K kernel code, 1324K rwdata, 5172K rodata, 28608K init, 456K bss, 88984K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 320 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: MBI range [296:319]
- [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x634 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000609] Console: colour dummy device 80x25
- [ 0.001217] printk: console [tty0] enabled
- [ 0.001335] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.001373] pid_max: default: 32768 minimum: 301
- [ 0.001475] LSM: Security Framework initializing
- [ 0.001586] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.001628] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.003507] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.003543] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.003880] rcu: Hierarchical SRCU implementation.
- [ 0.005459] EFI services will not be available.
- [ 0.005827] smp: Bringing up secondary CPUs ...
- [ 0.007267] Detected VIPT I-cache on CPU1
- [ 0.007312] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
- [ 0.007376] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
- [ 0.008941] Detected VIPT I-cache on CPU2
- [ 0.008982] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
- [ 0.009034] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
- [ 0.010526] Detected VIPT I-cache on CPU3
- [ 0.010565] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
- [ 0.010614] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
- [ 0.010728] smp: Brought up 1 node, 4 CPUs
- [ 0.010853] SMP: Total of 4 processors activated.
- [ 0.010870] CPU features: detected: 32-bit EL0 Support
- [ 0.010884] CPU features: detected: 32-bit EL1 Support
- [ 0.010901] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
- [ 0.010924] CPU features: detected: Common not Private translations
- [ 0.010940] CPU features: detected: CRC32 instructions
- [ 0.010957] CPU features: detected: RCpc load-acquire (LDAPR)
- [ 0.010971] CPU features: detected: LSE atomic instructions
- [ 0.010987] CPU features: detected: Privileged Access Never
- [ 0.011002] CPU features: detected: RAS Extension Support
- [ 0.011020] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
- [ 0.034204] CPU: All CPU(s) started at EL2
- [ 0.036512] devtmpfs: initialized
- [ 0.045853] KASLR disabled due to lack of seed
- [ 0.046095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.046142] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.047310] pinctrl core: initialized pinctrl subsystem
- [ 0.048224] DMI not present or invalid.
- [ 0.048900] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.050943] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
- [ 0.051222] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.051466] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.051572] audit: initializing netlink subsys (disabled)
- [ 0.051803] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
- [ 0.053469] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.053479] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.053914] cpuidle: using governor menu
- [ 0.054276] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.054450] ASID allocator initialised with 65536 entries
- [ 0.055462] Serial: AMBA PL011 UART driver
- [ 0.063885] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
- [ 0.075647] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
- [ 0.076333] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
- [ 0.077012] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
- [ 0.077632] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
- [ 0.078231] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
- [ 0.080627] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
- [ 0.094049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.094091] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.094111] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.094129] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.096307] ACPI: Interpreter disabled.
- [ 0.098677] iommu: Default domain type: Translated
- [ 0.098707] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.099460] vgaarb: loaded
- [ 0.099816] SCSI subsystem initialized
- [ 0.100404] usbcore: registered new interface driver usbfs
- [ 0.100486] usbcore: registered new interface driver hub
- [ 0.100545] usbcore: registered new device driver usb
- [ 0.101020] pps_core: LinuxPPS API ver. 1 registered
- [ 0.101042] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.101082] PTP clock support registered
- [ 0.101287] EDAC MC: Ver: 3.0.0
- [ 0.102159] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
- [ 0.102256] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
- [ 0.102995] FPGA manager framework
- [ 0.103115] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.104540] clocksource: Switched to clocksource arch_sys_counter
- [ 0.104829] VFS: Disk quotas dquot_6.6.0
- [ 0.104906] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.105169] pnp: PnP ACPI: disabled
- [ 0.115510] NET: Registered PF_INET protocol family
- [ 0.115748] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.117300] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
- [ 0.117426] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.117610] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 0.117861] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.118009] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.118079] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.118277] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.118791] RPC: Registered named UNIX socket transport module.
- [ 0.118817] RPC: Registered udp transport module.
- [ 0.118832] RPC: Registered tcp transport module.
- [ 0.118846] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.118869] PCI: CLS 0 bytes, default 64
- [ 0.129555] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
- [ 0.130249] kvm [1]: IPA Size Limit: 40 bits
- [ 0.130301] kvm [1]: GICv3: no GICV resource entry
- [ 0.130320] kvm [1]: disabling GICv2 emulation
- [ 0.130353] kvm [1]: GIC system register CPU interface enabled
- [ 0.130579] kvm [1]: vgic interrupt IRQ9
- [ 0.130853] kvm [1]: VHE mode initialized successfully
- [ 0.132944] Initialise system trusted keyrings
- [ 0.133336] workingset: timestamp_bits=42 max_order=19 bucket_order=0
- [ 0.142029] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.143110] NFS: Registering the id_resolver key type
- [ 0.143179] Key type id_resolver registered
- [ 0.143198] Key type id_legacy registered
- [ 0.143322] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.143348] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 0.143650] 9p: Installing v9fs 9p2000 file system support
- [ 0.196893] Key type asymmetric registered
- [ 0.196946] Asymmetric key parser 'x509' registered
- [ 0.197082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.197111] io scheduler mq-deadline registered
- [ 0.197129] io scheduler kyber registered
- [ 0.202740] EINJ: ACPI disabled.
- [ 0.209007] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
- [ 0.209064] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.211813] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
- [ 0.211864] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.215039] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
- [ 0.219424] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.222394] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 26, base_baud = 1500000) is a 16550A
- [ 0.320050] printk: console [ttyS2] enabled
- [ 0.322992] rockchip-vop2 fe040000.vop: Adding to iommu group 0
- [ 0.326738] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.335797] loop: module loaded
- [ 0.337317] megasas: 07.719.03.00-rc1
- [ 0.343988] tun: Universal TUN/TAP device driver, 1.6
- [ 0.345535] thunder_xcv, ver 1.0
- [ 0.345930] thunder_bgx, ver 1.0
- [ 0.346285] nicpf, ver 1.0
- [ 0.347407] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 0.348081] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 0.348735] hclge is initializing
- [ 0.349073] e1000: Intel(R) PRO/1000 Network Driver
- [ 0.349517] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.350145] e1000e: Intel(R) PRO/1000 Network Driver
- [ 0.350611] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 0.351245] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 0.351745] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 0.352334] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- [ 0.352944] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 0.353839] sky2: driver version 1.30
- [ 0.354967] VFIO - User Level meta-driver version: 0.3
- [ 0.357697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.358310] ehci-pci: EHCI PCI platform driver
- [ 0.358807] ehci-platform: EHCI generic platform driver
- [ 0.359588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.360189] ohci-pci: OHCI PCI platform driver
- [ 0.360753] ohci-platform: OHCI generic platform driver
- [ 0.362013] usbcore: registered new interface driver usb-storage
- [ 0.365345] i2c_dev: i2c /dev entries driver
- [ 0.369079] rk808 0-0020: chip id: 0x8090
- [ 0.409388] random: fast init done
- [ 0.413292] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 0.413902] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 0.472669] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
- [ 0.476730] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
- [ 0.478025] sdhci: Secure Digital Host Controller Interface driver
- [ 0.478590] sdhci: Copyright(c) Pierre Ossman
- [ 0.479431] Synopsys Designware Multimedia Card Interface Driver
- [ 0.480457] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.480953] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.481621] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
- [ 0.482220] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
- [ 0.482793] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
- [ 0.484037] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
- [ 0.484743] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.485893] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
- [ 0.486572] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
- [ 0.487717] usbcore: registered new interface driver usbhid
- [ 0.488230] usbhid: USB HID core driver
- [ 0.491199] NET: Registered PF_PACKET protocol family
- [ 0.491810] 9pnet: Installing 9P2000 support
- [ 0.492254] Key type dns_resolver registered
- [ 0.493108] Loading compiled-in X.509 certificates
- [ 0.497772] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
- [ 0.529893] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
- [ 0.534385] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 0.535695] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 0.536746] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
- [ 0.537855] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
- [ 0.540677] ALSA device list:
- [ 0.540961] No soundcards found.
- [ 0.541437] dw-apb-uart fe660000.serial: forbid DMA for kernel console
- [ 0.554635] Freeing unused kernel memory: 28608K
- [ 0.564614] Run /init as init process
- Starting syslogd: OK
- Starting klogd: OK
- Running sysctl: OK
- Populating /dev using udev: [ 0.618054] udevd[139]: starting version 3.2.11
- [ 0.618877] random: udevd: uninitialized urandom read (16 bytes read)
- [ 0.619578] random: udevd: uninitialized urandom read (16 bytes read)
- [ 0.620183] random: udevd: uninitialized urandom read (16 bytes read)
- [ 0.625281] udevd[140]: starting eudev-3.2.11
- done
- Saving random seed: OK
- Starting network: OK
- Welcome to Buildroot
- buildroot login: root
- #
- #
- #
- #
- # mount -t debugfs none /sys/kernel/debug/
- # [ 31.708706] vcc3v3_lcd0_n: disabling
- [ 31.709103] vcc3v3_lcd1_n: disabling
- [ 31.709954] vdd_gpu: disabling
- # resize
- COLUMNS=183;LINES=40;export COLUMNS LINES;
- # export XDG_RUNTIME_DIR=/tmp
- # weston --backend=drm-backend.so --tty=2 --idle-time=0 --use-pixman --continue-without-input --logger-scopes=log,drm-backend &
- # Date: 1970-01-01 UTC
- [00:01:12.397] weston 10.0.0
- https://wayland.freedesktop.org
- Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
- Build: 2022.02-rc3-23-g49f5243caf
- [00:01:12.398] Command line: weston --backend=drm-backend.so --tty=2 --idle-time=0 --use-pixman --continue-without-input --logger-scopes=log,drm-backend
- [00:01:12.398] OS: Linux, 5.17.0-rc5-00312-g9d197fd3e27e-dirty, #114 SMP PREEMPT Tue Mar 8 15:40:15 CST 2022, aarch64
- [00:01:12.398] Flight recorder: enabled
- [00:01:12.398] warning: XDG_RUNTIME_DIR "/tmp" is not configured
- correctly. Unix access mode must be 0700 (current mode is 0777),
- and must be owned by the user UID 0 (current owner is UID 0).
- Refer to your distribution on how to get it, or
- http://www.freedesktop.org/wiki/Specifications/basedir-spec
- on how to implement it.
- [00:01:12.398] Starting with no config file.
- [00:01:12.398] Output repaint window is 7 ms maximum.
- [00:01:12.399] Loading module '/usr/lib/libweston-10/drm-backend.so'
- [00:01:12.416] initializing drm backend
- [00:01:12.416] Trying weston_launch launcher...
- [00:01:12.416] could not get launcher fd from env
- [00:01:12.416] Trying direct launcher...
- [00:01:12.418] using /dev/dri/card0
- [00:01:12.418] DRM: supports atomic modesetting
- [00:01:12.418] DRM: supports GBM modifiers
- [00:01:12.418] DRM: supports picture aspect ratio
- [00:01:12.427] warning: no input devices found, but none required as per configuration.
- [00:01:12.537] DRM: head 'HDMI-A-1' updated, connector 69 is connected, EDID make 'SNY', model 'SONY TV *00', serial '16843009'
- [00:01:12.537] DRM: head 'HDMI-A-1' found, connector 69 is connected, EDID make 'SNY', model 'SONY TV *00', serial '16843009'
- [00:01:12.538] Registered plugin API 'weston_drm_output_api_v1' of size 24
- [00:01:12.538] Color manager: no-op
- [00:01:12.538] weston_output_schedule_repaint HDMI-A-1
- [00:01:12.538] Output 'HDMI-A-1' using color profile: built-in default sRGB SDR profile
- [00:01:12.579] DRM: output HDMI-A-1 uses shadow framebuffer.
- [00:01:12.579] Output HDMI-A-1 (crtc 67) video modes:
- 1920x1080@60.0, current, 148.5 MHz
- 1920x1080@60.0 16:9, 148.5 MHz
- 1920x1080@59.9 16:9, 148.4 MHz
- 1920x1080@60.0 16:9, 74.3 MHz
- 1920x1080@59.9 16:9, 74.2 MHz
- 1920x1080@50.0 16:9, 148.5 MHz
- 1920x1080@50.0 16:9, 74.3 MHz
- 1920x1080@30.0 16:9, 74.3 MHz
- 1920x1080@24.0 16:9, 74.3 MHz
- 1680x1050@59.9, 119.0 MHz
- 1600x900@60.0, 108.0 MHz
- 1280x1024@60.0, 108.0 MHz
- 1152x864@75.0, 108.0 MHz
- 1280x720@60.0, 74.3 MHz
- 1280x720@60.0 16:9, 74.3 MHz
- 1280x720@59.9 16:9, 74.2 MHz
- 1280x720@50.0 16:9, 74.3 MHz
- 1280x720@30.0 16:9, 74.3 MHz
- 1280x720@24.0 16:9, 59.4 MHz
- 1024x768@60.0, 65.0 MHz
- 800x600@60.3, 40.0 MHz
- 720x576@50.0 16:9, 27.0 MHz
- 720x576@50.0 4:3, 27.0 MHz
- 720x480@60.0 16:9, 27.0 MHz
- 720x480@60.0 4:3, 27.0 MHz
- 720x480@59.9 16:9, 27.0 MHz
- 720x480@59.9 4:3, 27.0 MHz
- 640x480@60.0 4:3, 25.2 MHz
- 640x480@59.9, 25.2 MHz
- [00:01:12.581] Output 'HDMI-A-1' enabled with head(s) HDMI-A-1
- [00:01:12.581] Compositor capabilities:
- arbitrary surface rotation: yes
- screen capture uses y-flip: no
- cursor planes: yes
- arbitrary resolutions: no
- view mask clipping: yes
- explicit sync: no
- color operations: no
- presentation clock: CLOCK_MONOTONIC, id 1
- presentation clock resolution: 0.000000001 s
- [00:01:12.582] Loading module '/usr/lib/weston/desktop-shell.so'
- [00:01:12.586] launching '/usr/libexec/weston-keyboard'
- [00:01:12.587] Note: support for the deprecated wl_shell interface is disabled. If a legacy client still needs it, it can be re-enabled by passing -Ddeprecated-wl-shell=true to Meson
- when building Weston.
- [00:01:12.587] weston_output_schedule_repaint HDMI-A-1
- [00:01:12.588] idle_repaint HDMI-A-1
- [00:01:12.588] launching '/usr/libexec/weston-desktop-shell'
- [repaint] Beginning repaint; pending_state 0xaaaab97f0240
- Weston scene graph at 72.590028326:
- Output 0 (HDMI-A-1):
- position: (0, 0) -> (1920, 1080)
- mode: 1920x1080@60.000Hz
- scale: 1
- repaint status: repaint scheduled
- next repaint: 72.588327617
- Head 0 (HDMI-A-1): connected
- Layer 0 (pos 0xffffffff):
- View 0 (role (null), PID 0, surface ID 0, [no description available], 0xaaaab97efcf0):
- position: (0, 0) -> (1920, 1080)
- [fully opaque]
- outputs: 0 (HDMI-A-1) (primary)
- [buffer not available]
- Layer 1 (pos 0xfffffffe):
- [no views]
- Layer 2 (pos 0xb0000000):
- [no views]
- Layer 3 (pos 0x80000000):
- [no views]
- Layer 4 (pos 0x50000001):
- [no views]
- Layer 5 (pos 0x50000000):
- [no views]
- Layer 6 (pos 0x2):
- [no views]
- [00:01:12.590] weston_output_repaint HDMI-A-1
- [repaint] preparing state for output HDMI-A-1 (0)
- [repaint] trying planes-only build state
- [view] evaluating view 0xaaaab97efcf0 for output HDMI-A-1 (0)
- [view] not assigning view 0xaaaab97efcf0 to plane (no buffer available)
- [view] failing state generation: placing view 0xaaaab97efcf0 to renderer not allowed
- [repaint] could not build planes-only state, trying mixed
- [state] cannot propose mixed mode: for output HDMI-A-1 (0): no previous renderer fb
- [repaint] could not build mixed-mode state, trying renderer-only
- [view] evaluating view 0xaaaab97efcf0 for output HDMI-A-1 (0)
- [view] not assigning view 0xaaaab97efcf0 to plane (no buffer available)
- [view] view 0xaaaab97efcf0 will be placed on the renderer
- [repaint] Using render-only state composition
- [repaint] view 0xaaaab97efcf0 using renderer composition
- [00:01:12.590] drm_output_repaint HDMI-A-1
- [atomic] previous state invalid; starting with fresh state
- [atomic] starting with plane 61 disabled
- [PLANE:61] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:61] 17 (FB_ID) -> 0 (0x0)
- [atomic] starting with plane 55 disabled
- [PLANE:55] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:55] 17 (FB_ID) -> 0 (0x0)
- [atomic] starting with plane 49 disabled
- [PLANE:49] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:49] 17 (FB_ID) -> 0 (0x0)
- [atomic] starting with plane 43 disabled
- [PLANE:43] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:43] 17 (FB_ID) -> 0 (0x0)
- [atomic] starting with plane 37 disabled
- [PLANE:37] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:37] 17 (FB_ID) -> 0 (0x0)
- [atomic] starting with plane 31 disabled
- [PLANE:31] 20 (CRTC_ID) -> 0 (0x0)
- [PLANE:31] 17 (FB_ID) -> 0 (0x0)
- [atomic] applying output 0 (HDMI-A-1) state
- [atomic] DPMS state differs, modeset OK
- [atomic] created new mode blob 74 for 1920x1080
- [CRTC:67] 23 (MODE_ID) -> 74 (0x4a)
- [CRTC:67] 22 (ACTIVE) -> 1 (0x1)
- [CONN:69] 20 (CRTC_ID) -> 67 (0x43)
- [PLANE:31] 17 (FB_ID) -> 73 (0x49)
- [PLANE:31] 20 (CRTC_ID) -> 67 (0x43)
- [PLANE:31] 9 (SRC_X) -> 0 (0x0)
- [PLANE:31] 10 (SRC_Y) -> 0 (0x0)
- [PLANE:31] 11 (SRC_W) -> 125829120 (0x7800000)
- [PLANE:31] 12 (SRC_H) -> 70778880 (0x4380000)
- [PLANE:31] 13 (CRTC_X) -> 0 (0x0)
- [PLANE:31] 14 (CRTC_Y) -> 0 (0x0)
- [PLANE:31] 15 (CRTC_W) -> 1920 (0x780)
- [PLANE:31] 16 (CRTC_H) -> 1080 (0x438)
- [PLANE:31] FORMAT: XRGB8888
- [atomic] drmModeAtomicCommit
- [00:01:12.608] atomic: couldn't commit new state: Resource temporarily unavailable
- [00:01:12.608] repaint-flush failed: Resource temporarily unavailable
- [repaint] flushed pending_state 0xaaaab97f0240
- [ 72.636414] urandom_read: 4 callbacks suppressed
- could not load cursor '[ 72.636430] random: weston-keyboard: uninitialized urandom read (6 bytes read)
- dnd-move'
- could not load cursor 'dnd-copy'
- could not load cursor 'dnd-none'
- could not load cursor 'dnd-move'
- could not load cursor 'dnd-copy'
- could not load cursor 'dnd-none'
- [ 72.664629] random: weston-keyboard: uninitialized urandom read (6 bytes read)
- [00:01:13.080] weston_output_schedule_repaint HDMI-A-1
- [00:01:13.081] weston_output_schedule_repaint HDMI-A-1
- [00:01:13.081] weston_output_schedule_repaint HDMI-A-1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement