SHARE
TWEET

SKHynix Console

a guest Mar 13th, 2019 495 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. aes      : Turn AES On And Off in XSQ
  2. apst     : Show APST info, turn feature on/off (apst;apst 1;apst 0)
  3. baud     : 0 : 38400 bps, 1 : 115200 bps.
  4. cbuf     : <buf1><buf2><nbyte> compare two Buffer data with nbyte.
  5. cerase   : FDE Crypto Erase
  6. chipotp  : Read Pegasus OTP
  7. copy     : <SourceAddr><DestAddr><DwordLength><Loops> Copy From One Location To Another
  8. cpregister : Set cp Reg.
  9. cptest   : Test CP sram
  10. ctest    : <addr><loops> Cache Flush Test
  11. dbuf     : <buf><nbyte> dump Buffer for nbyte.
  12. dm       : NAND_ARM dm command
  13. dnfw     : download Nand Boot FW to DDR
  14. dperr    : Dump DpErr Fifo
  15. dsfw     : download Serial Boot FW to DDR
  16. edb      : Enable Debug.
  17. emt      : <enable> 0 : MS thermal, 1 : Dell thermal
  18. eppd     : set ePPID
  19. eui      : set EUI-64
  20. fbuf     : <buf><data><nbyte> fill Buffer with data.
  21. fcd      : Flush command disable
  22. fce      : Flush command enable
  23. fdefac   : FDE factory initialize
  24. fdeinit  : FDE Initialize settings
  25. format   : <format# 1-16> <MS> <PI> default(15, 1, 0) (3, 1, 4) format 16, Erase and format NAND
  26. fwcfg    : display fiwmware configuration options
  27. fwm      : FW Manager
  28. fwrp     : fw replace
  29. hcr      : <start_lba><end_lba> host command read the lba (hex)
  30. hcr1     : <sector><start_lba><end_lba> host command read the lba (hex)
  31. hcw      : <start_lba><end_lba> host command write the lba (hex)
  32. hcw1     : <sector><start_lba><end_lba> host command write the lba (hex)
  33. hcwr     : <start_lba><end_lba> host command write the lba and read back(hex)
  34. hcwv     : <start_lba><end_lba><val> host command write the lba (hex)
  35. help     : show availiable commands.
  36. ito      : ito test num
  37. l12p     : enter L1.2
  38. led      : Blink LED
  39. llf      : <flag> Low Level Format - flag =1 to recreate defect map
  40. maxcap   : display max capacity
  41. mcucmd   : Send mcu command by I2C
  42. modelnum : Set Model number
  43. mprint   : Memory Print
  44. n        : switch UART to nand ARM.
  45. nandwboot : NAND warmboot
  46. narm     : NAND_ARM shell command
  47. pcie     : Display PCIe Link Information
  48. pllpwr   : Change PLLx to n/8, <x,0..3> <n,0..8>
  49. pm       : <power state>
  50. qinfo    : Display XSQ and AQ Information
  51. r        : Chip Reset && Enter Boot loader mode
  52. regr     : <addr> read register at given address(hex format).
  53. regw     : <addr> <val> write register at given address(hex) with given val(hex).
  54. rev      : display F/W and FPGA revision
  55. setmt    : <enable> 0 : MS thermal, 1 : Dell thermal
  56. setrev   : display F/W and FPGA revision
  57. show     : Show Table Info
  58. smart    : prINT32 512byte smart raw data
  59. smartdbg : debug SMART info.
  60. sn       : Set Serial number
  61. ss       : Safe Shutdown
  62. stsdump  : tag & state print
  63. tcdelay  : Test CDelay <test> <delay>
  64. temper   : Read the new temper sensor (MCP9844)
  65. thm      : print-thermal-time 1, 2, 3...
  66. time     : kernel timestamp.
  67. timer    : <timer><on/off> Enable/Disable timer [0-3]
  68. tmem     : Test memory
  69. vuread   : <die> <block> <page> <offset> VU Read
  70. vutest   : Vu Descriptor
  71. vuwr     : <die> <block> <page> <offset> VU Write
  72. watchdog : toggle software watchdog timeout
  73. xgk      : Crypto Get Key
  74. xsk      : Crypto Set Key
  75. xsm      : Crypto Set Mode
  76. xts256   : XTS Crypto Test
  77. zmem     : Zero Memory
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top