API tools faq
paste
Dylan_Jeter1998

TSS - Dodge Charger Coilovers

Dylan_Jeter1998
Feb 7th, 2021
231
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.27 KB | None | 0 0
raw download clone embed print report
  1. 2021-02-07 19:25:37 ★ Cletus Taylor walks into the garage proceeding to press on the Dodge's keyfob, popping the trunk.
  2. 2021-02-07 19:25:48 ★ Cletus Taylor walks over to the trunk, gripping its handle; then pulls it up into the open position.
  3. 2021-02-07 19:26:01 ★ Cletus Taylor grips set of coilovers, proceeding to slide them out of the trunk, then places them on the -
  4. 2021-02-07 19:26:08 ★ ground nearby. ((Cletus Taylor))
  5. 2021-02-07 19:26:20 ★ Cletus Taylor walks over to the corner, proceeding to grip the hydraulic jack; then rolls it over to the -
  6. 2021-02-07 19:26:23 ★ front-end of the Dodge. ((Cletus Taylor))
  7. 2021-02-07 19:26:30 ★ Cletus Taylor positions the jack underneath the Dodge's subframe, proceeding to carefully jack ---
  8. 2021-02-07 19:26:40 ★ it up, lifting the front wheels off the ground. ((Cletus Taylor))
  9. 2021-02-07 19:27:01 ★ Cletus Taylor steps aside, proceeding to take hold of two jack stands; then slides both underneath ---
  10. 2021-02-07 19:27:15 ★ the subframe of the Charger, locking them into position. ((Cletus Taylor))
  11. 2021-02-07 19:27:32 ★ Cletus Taylor steps over to the jack, twisting the handle left; lowering the jack allowing the Charger to ---
  12. 2021-02-07 19:27:41 ★ rest on the jack stands. ((Cletus Taylor))
  13. 2021-02-07 19:27:52 ★ Cletus Taylor rolls the jack out from underneath the Dodge, then repositions it underneath the rear of ---
  14. 2021-02-07 19:28:09 ★ the vehicle proceeding to position it underneath the designated jacking point --- ((Cletus Taylor))
  15. 2021-02-07 19:28:18 ★ then continues to slowly pump the jack up lifting the rear wheels off the ground. ((Cletus Taylor))
  16. 2021-02-07 19:28:31 ★ Cletus Taylor steps aside, proceeding to take hold of the two final jack stands; then positions them ---
  17. 2021-02-07 19:28:38 ★ underneath the Dodge's frame. ((Cletus Taylor))
  18. 2021-02-07 19:28:57 ★ Cletus Taylor grips the jack, proceeding to twist the handle to the left; slowly lowering the jack ---
  19. 2021-02-07 19:29:06 ★ down allowing the Dodge to rest on the four jack stands. ((Cletus Taylor))
  20. 2021-02-07 19:29:16 ★ Cletus Taylor walks over to the toolbox, proceeding to grip its handle; then guides the cart towards ---
  21. 2021-02-07 19:29:23 ★ the side of the Dodge. ((Cletus Taylor))
  22. 2021-02-07 19:29:31 ★ Cletus Taylor grips a drawer, continuing to open it; then takes hold of a breaker bar along with ---
  23. 2021-02-07 19:29:41 ★ an appropriately sized socket. ((Cletus Taylor))
  24. 2021-02-07 19:29:53 ★ Cletus Taylor connects the socket to the bar, proceeding to lean it against the Dodge.
  25. 2021-02-07 19:30:04 ★ Cletus Taylor walks over to the cabinet, taking hold of the impact wrench, then strolls back to the Dodge.
  26. 2021-02-07 19:30:11 ★ Cletus Taylor steps towards the front-left tire, proceeding to quickly unbolt each of the five lug nuts; -
  27. 2021-02-07 19:30:21 ★ then places them on the floor near the wheel. ((Cletus Taylor))
  28. 2021-02-07 19:30:36 ★ Cletus Taylor places the impact wrench on the ground, proceeding to grip the wheel with both hands carefully -
  29. 2021-02-07 19:30:42 ★ tugging it off of the hub assembly. ((Cletus Taylor))
  30. 2021-02-07 19:30:49 ★ Cletus Taylor rolls the wheel aside, laying it over neatly.
  31. 2021-02-07 19:30:54 ★ Cletus Taylor walks back to the Dodge, proceeding to grip the breaker bar.
  32. 2021-02-07 19:31:01 ★ Cletus Taylor positions himself next to the wheel well, proceeding to lean into the wheel well visually --
  33. 2021-02-07 19:31:11 ★ searching for the brake caliper's bolts. ((Cletus Taylor))
  34. 2021-02-07 19:31:19 ★ Cletus Taylor would locate the bolts, proceeding to connect the wrench to the lower bolt, carefully ---
  35. 2021-02-07 19:31:25 ★ --- twisting it to the left numerous times; removing it from the bracket. ((Cletus Taylor))
  36. 2021-02-07 19:31:35 ★ Cletus Taylor moves onto the upper bolt, proceeding to quickly twist it to the left; removing it from ---
  37. 2021-02-07 19:31:41 ★ the bracketry. ((Cletus Taylor))
  38. 2021-02-07 19:31:49 ★ Cletus Taylor places the two bolts on the floor, proceeding to grip the now-freed brake caliper, ---
  39. 2021-02-07 19:32:00 ★ continuing to slide it off of the rotor, then places it loosely on top of the lower --- ((Cletus Taylor))
  40. 2021-02-07 19:32:04 ★ control arm. ((Cletus Taylor))
  41. 2021-02-07 19:32:54 ★ Cletus Taylor leans to the side, proceeding to look at the suspension assembly of the Dodge, locating ---
  42. 2021-02-07 19:33:02 ★ the sway bar end-link. ((Cletus Taylor))
  43. 2021-02-07 19:33:08 ★ Cletus Taylor connects the mouth of the wrench to the upper bolt, proceeding to twist it to the left ---
  44. 2021-02-07 19:33:13 ★ a few times, freeing it from the swaybar. ((Cletus Taylor))
  45. 2021-02-07 19:33:25 ★ Cletus Taylor grips the sway bar, proceeding to pop it up; disconnecting it from the end link.
  46. 2021-02-07 19:33:31 ★ Cletus Taylor stands up, proceeding to reach into the Dodge's open door; pulling the hood release ---
  47. 2021-02-07 19:33:38 ★ lever, then walks to the hood. ((Cletus Taylor))
  48. 2021-02-07 19:33:46 ★ Cletus Taylor slips his hand underneath the hood, proceeding to slide the latch aside, openign the hood.
  49. 2021-02-07 19:33:51 ★ Cletus Taylor grabs ahold of the adjustable wrench, proceeding to lean over the engine bay ---
  50. 2021-02-07 19:33:58 ★ towards the upper strut mount bolts. ((Cletus Taylor))
  51. 2021-02-07 19:34:03 ★ Cletus Taylor connects the mouth of the wrench to one of the three bolts, quickly twisting it to the ---
  52. 2021-02-07 19:34:11 ★ left a few times, then moves onto the next bolt; eventually removing the three bolts --- ((Cletus Taylor))
  53. 2021-02-07 19:34:20 ★ thus freeing the upper-section of the factory struts. ((Cletus Taylor))
  54. 2021-02-07 19:34:33 ★ Cletus Taylor places the bolts on top of the engine, proceeding to walk back to the side of the Dodge.
  55. 2021-02-07 19:34:41 ★ Cletus Taylor reaches towards the lower section of the factory strut, proceeding to connect the ---
  56. 2021-02-07 19:34:52 ★ mouth of the wrench to one of the two lower mounting bolts of the strut, then quickly --- ((Cletus Taylor))
  57. 2021-02-07 19:35:00 ★ twists it to the left a few times; then moves onto the next bolt. ((Cletus Taylor))
  58. 2021-02-07 19:35:07 ★ Cletus Taylor places the two bolts on the ground, proceeding to place the wrench with them.
  59. 2021-02-07 19:35:20 ★ Cletus Taylor leans into the wheel well, proceeding to look towards the lower control arm, then ---
  60. 2021-02-07 19:35:27 ★ looks up towards the upper control arm; locating the nut securing it to the lower balljoint. ((Cletus taylor))
  61. 2021-02-07 19:35:34 ★ Cletus Taylor connects the wrench to the bolt, proceeding to quickly twist it to the left; removing it ---
  62. 2021-02-07 19:35:42 ★ entirely, thus allowing the lower control arm to hang freely. ((Cletus Taylor))
  63. 2021-02-07 19:35:57 ★ Cletus Taylor grips the now completely freed strut, proceeding to pull it down; sliding it out.
  64. 2021-02-07 19:36:06 ★ Cletus Taylor leans over, proceeding to place the old strut down; then grips the new coilover.
  65. 2021-02-07 19:36:52 ★ Cletus Taylor places the coilover on the ground next to the front-left wheel, proceeding to walk ---
  66. 2021-02-07 19:36:58 ★ to the passenger side of the vehicle. ((Cletus Taylor))
  67. 2021-02-07 19:37:17 ★ Cletus Taylor completes the same exact sets of actions, thus removing the wheel and factory ---
  68. 2021-02-07 19:37:22 ★ strut assembly. ((Cletus Taylor))
  69. 2021-02-07 19:37:39 ★ Cletus Taylor walks to the trunk of the Dodge, proceeding to lean into the trunk.
  70. 2021-02-07 19:38:00 ★ Cletus Taylor grabs ahold of the front strut bar, proceeding to walk back to the front-end of the DOdge.
  71. 2021-02-07 19:38:17 ★ Cletus Taylor opens the box, proceeding to slip the bar out; then places it onto the strut towers.
  72. 2021-02-07 19:38:40 ★ Cletus Taylor positions the bolt holes over the holes on the frame, proceeding to leave it sitting there -
  73. 2021-02-07 19:38:44 ★ loosely. ((Cletus Taylor))
  74. 2021-02-07 19:38:55 ★ Cletus Taylor turns around, proceeding to take hold of a roll of masking tape, then proceeds to ---
  75. 2021-02-07 19:39:02 ★ tape the bar into position temporarily. ((Cletus Taylor))
  76. 2021-02-07 19:39:34 ★ Cletus Taylor grips the three bolts from atop of the engine, proceeding to walk to the driver-side ---
  77. 2021-02-07 19:39:41 ★ of the Dodge, continuing to grip the coilover. ((Cletus Taylor))
  78. 2021-02-07 19:39:57 ★ Cletus Taylor slides the coilover into position, proceeding to guide its studs through the holes on the --
  79. 2021-02-07 19:40:03 ★ apron along with the strut bar. ((Cletus Taylor))
  80. 2021-02-07 19:40:22 ★ Cletus Taylor holds the coilover into position, proceeding to reach over the fender; loosely twisting ---
  81. 2021-02-07 19:40:36 ★ the bolts into their holts, thus loosely securing the coilover to the apron. ((Cletus Taylor))
  82. 2021-02-07 19:40:48 ★ Cletus Taylor walks over to the passenger side of the vehicle, proceeding to complete the same set ---
  83. 2021-02-07 19:41:03 ★ of actions, thus securing the strut bar and the coilovers to the DOdge's front-end. ((Cletus Taylor))
  84. 2021-02-07 19:41:25 ★ Cletus Taylor walks over to the driver side of the Dodge, proceeding to crouch back down.
  85. 2021-02-07 19:41:45 ★ Cletus Taylor grips the lower control arm, proceeding to lift upwards on it connecting it to ---
  86. 2021-02-07 19:41:53 ★ the bottom of the new coilover. ((Cletus Taylor))
  87. 2021-02-07 19:42:28 ★ Cletus Taylor grips the two bolts, twisting them into the lower section of the coilover by hand; thus ---
  88. 2021-02-07 19:42:35 ★ loosely securing the coilover to the lower control arm. ((Cletus Taylor))
  89. 2021-02-07 19:42:53 ★ Cletus Taylor grips the bolt, proceeding to twist it back into position; thus loosely connecting the ---
  90. 2021-02-07 19:42:59 ★ upper control arm to the lower balljoint. ((Cletus Taylor))
  91. 2021-02-07 19:43:37 ★ Cletus Taylor grips the torque wrench, proceeding to set it to the proper torque specs.
  92. 2021-02-07 19:43:47 ★ Cletus Taylor proceeds to tighten down each of the bolts; firmly securing the ---
  93. 2021-02-07 19:43:55 ★ coilover into position with the remainder of the suspension components. ((Cletus Taylor))
  94. 2021-02-07 19:44:52 ★ Cletus Taylor grabs ahold of the factory brake caliper, then carefully slides it caliper into position ---
  95. 2021-02-07 19:45:19 ★ over the factory brake rotor, proceeding to grip the two bolts. ((Cletus Taylor))
  96. 2021-02-07 19:45:38 ★ Cletus Taylor continues to thread the bolts into the back of the caliper; loosely securing it ---
  97. 2021-02-07 19:45:48 ★ into position on its bracketry over the rotor. ((Cletus Taylor))
  98. 2021-02-07 19:46:02 ★ Cletus Taylor grips his wrench, proceeding to tighten down the two bolts, securing the caliper into ---
  99. 2021-02-07 19:46:10 ★ position on the vehicle. ((Cletus Taylor))
  100. 2021-02-07 19:46:45 ★ Cletus Taylor walks over to the wheel rack, proceeding to take hold of the new OE Creations wheel.
  101. 2021-02-07 19:47:09 ★ Cletus Taylor rolls the wheel over to the Dodge, proceeding to grabs ahold of the wheel, proceeding to ---
  102. 2021-02-07 19:47:19 ★ lift it up carefully sliding it onto the studs on the hub. ((Cletus Taylor))
  103. 2021-02-07 19:47:29 ★ Cletus Taylor grips the impact wrench, proceeding to quickly tighten the five lug nuts down; thus ---
  104. 2021-02-07 19:47:36 ★ securing the wheel to the Charger. ((Cletus Taylor))
  105. 2021-02-07 19:47:47 ★ Cletus Taylor stands up, proceeding to walk to the wheel rack, taking hold of the other wheel.
  106. 2021-02-07 19:48:05 ★ Cletus Taylor rolls the wheel over to the passenger side of the Dodge, proceeding to ---
  107. 2021-02-07 19:48:16 ★ complete the same set ofa ctions to the passenger side of the vehicle. ((Cletus Taylor))
  108. 2021-02-07 19:49:57 ★ Cletus Taylor places the impact wrench down, proceeding to stand up then walks to the front of the Dodge.
  109. 2021-02-07 19:50:09 ★ Cletus Taylor grips the hood, proceeding to lwoer it it down; latching it.
  110. 2021-02-07 19:51:43 ★ Cletus Taylor grips the impact wrench, proceeding to step towards the rear-left wheel of the Dodge.
  111. 2021-02-07 19:52:25 ★ Cletus Taylor positions himself by the rear-left wheel, proceeding to crouch down; sliding closer.
  112. 2021-02-07 19:53:12 ★ Cletus Taylor carefully connects the socket to one of the lug nuts on the rear-right wheel, quickly ---
  113. 2021-02-07 19:53:27 ★ loosening it with the impact, then moves onto the next, eventually removing all five lug nuts. ((Cletus taylor))
  114. 2021-02-07 19:53:36 ★ Cletus Taylor places the impact wrench down, proceeding to grip the wheel; slidding it off of the hub
  115. 2021-02-07 19:53:50 ★ Cletus Taylor rolls the wheel aside, proceeding to lay it over; then takes hold of the impact wrench.
  116. 2021-02-07 19:54:07 ★ Cletus Taylor steps towards the rear-right wheel, proceeding to connect the socket to one of the ---
  117. 2021-02-07 19:54:12 ★ lug nuts, quickly loosening it with the impact, then moves onto the next bolt. ((Cletus Taylor))
  118. 2021-02-07 19:54:19 ★ Cletus Taylor removes all five lug nuts, proceeding to then place the impact down.
  119. 2021-02-07 19:54:25 ★ Cletus Taylor takes hold of the wheel, proceeding to slide it off of the hub, then rolls it aside.
  120. 2021-02-07 19:54:34 ★ Cletus Taylor reaches into his pocket, proceeding to remove the wrench; then crouches down at ---
  121. 2021-02-07 19:54:43 ★ the rear-left of the Dodge. ((Cletus Taylor))
  122. 2021-02-07 19:54:50 ★ Cletus Taylor reaches behind the brake caliper, proceeding to quickly loosen the two bolts ---
  123. 2021-02-07 19:54:58 ★ securing the caliper to the bracket, then places them on the floor. ((Cletus Taylor))
  124. 2021-02-07 19:55:21 ★ Cletus Taylor takes hold of the caliper, carefully sliding it out of position; hanging it over the ---
  125. 2021-02-07 19:55:26 ★ lower control arm. ((Cletus Taylor))
  126. 2021-02-07 19:56:07 ★ Cletus Taylor stands up, proceeding to walk to the trunk of the Dodge.
  127. 2021-02-07 19:56:15 ★ Cletus Taylor leans into the previously opened trunk, proceeding to grip the carpets on each side ---
  128. 2021-02-07 19:56:23 ★ curling them over, exposing the upper hardware for the factory stuts. ((Cletus Taylor))
  129. 2021-02-07 19:56:31 ★ Cletus Taylor reaches over, taking hold of the wrench, proceeding to quickly unbolt each of the ---
  130. 2021-02-07 19:56:36 ★ three bolts on the upper-section of the stut on the passenger side, then moves onto the --- ((Cletus Taylor))
  131. 2021-02-07 19:56:44 ★ driver side, completely removing each of the three bolts from the strut. ((Cletus Taylor))
  132. 2021-02-07 19:56:54 ★ Cletus Taylor places the bolts on the floor of the Dodge, proceeding to lean back out of the trunk.
  133. 2021-02-07 19:57:03 ★ Cletus Taylor walks to the rear-right side of the Dodge, proceeding to connect the wrench to the ---
  134. 2021-02-07 19:57:12 ★ lowest bolt on the factory strut, quickly twisting it to the left, then moves onto the --- ((Cletus Taylor))
  135. 2021-02-07 19:57:55 ★ second bolt, quickly twisting it to the left. ((Cletus Taylor))
  136. 2021-02-07 19:58:02 ★ Cletus Taylor places both bolts on the floor, proceeding to then grip the factory stut, pulling it out.
  137. 2021-02-07 19:58:21 ★ Cletus Taylor walks over to the driver-side of the Dodge, proceeding to complete the same steps ---
  138. 2021-02-07 19:58:27 ★ to the factory strut, removing it from its position. ((Cletus Taylor))
  139. 2021-02-07 19:58:34 ★ Cletus Taylor places both factory struts aside, proceeding to take hold of the replacement coilovers ---
  140. 2021-02-07 19:58:48 ★ removing them from the cardboard box. ((Cletus Taylor))
  141. 2021-02-07 19:58:55 ★ Cletus Taylor places one coilover on the floor on the driver-side, proceeding to walk over to the oppsite
  142. 2021-02-07 19:59:06 ★ Cletus Taylor carefully guides the coilover into position, pressing the bottom of the coilover against ---
  143. 2021-02-07 19:59:14 ★ the lower control arm. ((Cletus Taylor))
  144. 2021-02-07 19:59:20 ★ Cletus Taylor grips the two bolts, proceeding to twist them into position by hand; loosely securing it.
  145. 2021-02-07 19:59:29 ★ Cletus Taylor steps towards the trunk, proceeding to grip the three bolts; continuing to twist them ---
  146. 2021-02-07 19:59:42 ★ into their positions on their studs by hand. ((Cletus Taylor))
  147. 2021-02-07 20:00:05 ★ Cletus Taylor grips the wrench, quickly tightening all three bolts down, then steps towards the side of ---
  148. 2021-02-07 20:00:13 ★ the vehicle again. ((Cletus Taylor))
  149. 2021-02-07 20:00:19 ★ Cletus Taylor grips the wrench firmly, proceeding to tighten down each of the bolts.
  150. 2021-02-07 20:00:25 ★ Cletus Taylor steps over to the driver side of the Dodge, proceeding to grip the coilover; then ---
  151. 2021-02-07 20:00:42 ★ Cletus Taylor proceeds to complete the same set of actions, thus finishing up the coilover installation.
  152. 2021-02-07 20:01:26 ★ Cletus Taylor walks over to the wheel rack, proceeding to take hold of both rear wheels, proceeding ---
  153. 2021-02-07 20:01:35 ★ to roll them over towards the rear of the Dodge. ((Cletus Taylor))
  154. 2021-02-07 20:02:03 ★ Cletus Taylor grabs ahold of one wheel, proceeding to lift it up; then carefully slides it into position -
  155. 2021-02-07 20:02:09 ★ on the rear hub of the Dodge. ((Cletus Taylor))
  156. 2021-02-07 20:02:24 ★ Cletus Taylor grips the five lug nuts, carefully twisting them into position; loosely securing the ---
  157. 2021-02-07 20:02:29 ★ wheel into position. ((Cletus Taylor))
  158. 2021-02-07 20:02:41 ★ Cletus Taylor grips the impact wrench, proceeding to quickly tighten down each of the five lug ---
  159. 2021-02-07 20:02:47 ★ nuts in a star-like pattern. ((Cletus Taylor))
  160. 2021-02-07 20:03:05 ★ Cletus Taylor walks over towards the driver-side, proceeding to place the impact down.
  161. 2021-02-07 20:03:23 ★ Cletus Taylor grabs ahold of the final wheel, proceeding to lift it up; sliding it onto the hub assembly.
  162. 2021-02-07 20:03:34 ★ Cletus Taylor grips the lug nuts, proceeding to twist them into position by hand.
  163. 2021-02-07 20:03:40 ★ Cletus Taylor grips the impact wrench, proceeding to quickly tighten down each of the five lug ---
  164. 2021-02-07 20:03:45 ★ nuts in a star-like pattern. ((Cletus Taylor))
  165. 2021-02-07 20:04:02 ★ Cletus Taylor disconnects the impact wrench, proceeding to walk to the shelf; placing it down.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!