Advertisement
Guest User

Untitled

a guest
Feb 17th, 2022
50
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.75 KB | None | 0 0
  1. [ 1.192609] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
  2. [ 1.192617] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
  3. [ 1.192626] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
  4. [ 1.192641] tegradc tegradc.1: blank - powerdown
  5. [ 1.192665] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
  6. [ 1.192670] Extcon DP: HPD disabled
  7. [ 1.192674] hpd: hpd_switch 0
  8. [ 1.192679] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
  9. [ 1.192687] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
  10. [ 1.192696] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
  11. [ 1.204607] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244
  12. [ 1.274892] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
  13. [ 1.279055] usb usb2: usb_suspend_both: status 0
  14. [ 1.294343] tegradc tegradc.0: blank - powerdown
  15. [ 1.311702] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
  16. [ 1.313877] rtc rtc1: alarm rtc device
  17. [ 1.313889] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
  18. [ 1.313916] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
  19. [ 1.314288] i2c /dev entries driver
  20. [ 1.315658] imx477 6-001a: tegracam sensor driver:imx477_v2.0.6
  21. [ 1.334239] extcon-disp-state extcon:disp-state: cable 47 state 0
  22. [ 1.334242] Extcon AUX1(HDMI) disable
  23. [ 1.394841] tegradc tegradc.0: unblank
  24. [ 1.412925] tegradc tegradc.0: nominal-pclk:241500000 parent:241500000 div:1.0 pclk:241500000 239085000~263235000
  25. [ 1.413002] tegradc tegradc.0: hdmi: tmds rate:241500K prod-setting:prod_c_hdmi_150m_300m
  26. [ 1.414075] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  27. [ 1.448885] extcon-disp-state extcon:disp-state: cable 47 state 1
  28. [ 1.448889] Extcon AUX1(HDMI) enable
  29. [ 1.464341] tegradc tegradc.0: sync windows ret = 246
  30. [ 1.490824] tegra-pcie 1003000.pcie: link 0 down, retrying
  31. [ 1.498832] usb 1-2: new high-speed USB device number 2 using tegra-xusb
  32. [ 1.500793] extcon-disp-state extcon:disp-state: cable 51 state 1
  33. [ 1.500796] Extcon HDMI: HPD enabled
  34. [ 1.500819] tegradc tegradc.0: hdmi: plugged
  35. [ 1.534706] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411
  36. [ 1.534714] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  37. [ 1.534718] usb 1-2: Product: 4-Port USB 2.1 Hub
  38. [ 1.534723] usb 1-2: Manufacturer: Generic
  39. [ 1.535992] hub 1-2:1.0: USB hub found
  40. [ 1.538165] hub 1-2:1.0: 4 ports detected
  41. [ 1.618053] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
  42. [ 1.620089] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
  43. [ 1.620095] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
  44. [ 1.620407] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  45. [ 1.620421] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
  46. [ 1.620430] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
  47. [ 1.620554] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  48. [ 1.620565] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
  49. [ 1.620572] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
  50. [ 1.620713] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  51. [ 1.620722] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
  52. [ 1.620728] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
  53. [ 1.620897] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
  54. [ 1.621468] tegra_aotag tegra-aotag: Registering sensor 0
  55. [ 1.621512] tegra_aotag tegra-aotag: Invalid temp readout
  56. [ 1.621533] tegra_aotag tegra-aotag: Invalid temp readout
  57. [ 1.621550] tegra_aotag tegra-aotag: Bound to TZ : ID 0
  58. [ 1.621560] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
  59. [ 1.622313] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  60. [ 1.622329] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
  61. [ 1.622470] tegra_aotag tegra-aotag: Invalid temp readout
  62. [ 1.622492] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
  63. [ 1.622952] parse_throttle_dt_data: Num cap clks = 6
  64. [ 1.622957] parse_throttle_dt_data: clk=cclk_g type=2
  65. [ 1.622964] parse_throttle_dt_data: clk=gpu type=4
  66. [ 1.622985] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
  67. [ 1.623006] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
  68. [ 1.623028] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
  69. [ 1.623032] parse_throttle_dt_data: clk=emc type=3
  70. [ 1.623358] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  71. [ 1.623448] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  72. [ 1.623565] tegra_throttle_probe: probe successful. #cdevs=4
  73. [ 1.624172] FAN dev name: pwm-fan
  74. [ 1.624215] FAN:gpio request success.
  75. [ 1.624258] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
  76. [ 1.624505] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
  77. [ 1.624629] pwm_fan_driver pwm-fan: fan tach request irq success
  78. [ 1.624637] pwm_fan_driver pwm-fan: tach period: 1000
  79. [ 1.624717] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
  80. [ 1.624723] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
  81. [ 1.624728] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
  82. [ 1.624733] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
  83. [ 1.624738] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
  84. [ 1.624743] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
  85. [ 1.624748] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
  86. [ 1.624753] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
  87. [ 1.624757] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
  88. [ 1.624762] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
  89. [ 1.626914] device-mapper: uevent: version 1.0.3
  90. [ 1.627320] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  91. [ 1.630024] tegra210-cpufreq cpufreq: probe()...completed
  92. [ 1.630741] sdhci: Secure Digital Host Controller Interface driver
  93. [ 1.630743] sdhci: Copyright(c) Pierre Ossman
  94. [ 1.630745] sdhci-pltfm: SDHCI platform and OF driver helper
  95. [ 1.631292] sdhci-tegra sdhci-tegra.0: Got CD GPIO
  96. [ 1.631676] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
  97. [ 1.631804] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
  98. [ 1.637065] tegra-se 70012000.se: tegra_se_probe: complete
  99. [ 1.637588] hidraw: raw HID events driver (C) Jiri Kosina
  100. [ 1.638770] usbcore: registered new interface driver usbhid
  101. [ 1.638772] usbhid: USB HID core driver
  102. [ 1.640943] tegra21x_actmon 6000c800.actmon: in actmon_register()...
  103. [ 1.641115] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
  104. [ 1.643206] nvpmodel: initialized successfully
  105. [ 1.643710] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
  106. [ 1.644437] usbcore: registered new interface driver snd-usb-audio
  107. [ 1.644495] No Device Node present for smmu client: snd-soc-dummy !!
  108. [ 1.644500] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
  109. [ 1.644517] iommu: Adding device snd-soc-dummy to group 36
  110. [ 1.657253] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
  111. [ 1.662846] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1
  112. [ 1.670735] OPE platform probe
  113. [ 1.670835] OPE platform probe successful
  114. [ 1.671095] OPE platform probe
  115. [ 1.671178] OPE platform probe successful
  116. [ 1.678887] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
  117. [ 1.678892] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  118. [ 1.678895] usb 2-1: Product: 4-Port USB 3.1 Hub
  119. [ 1.678899] usb 2-1: Manufacturer: Generic
  120. [ 1.682999] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
  121. [ 1.684242] hub 2-1:1.0: USB hub found
  122. [ 1.686476] hub 2-1:1.0: 4 ports detected
  123. [ 1.686895] usb 1-2: usb_suspend_both: status 0
  124. [ 1.686990] usb usb1: usb_suspend_both: status 0
  125. [ 1.698024] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
  126. [ 1.698163] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
  127. [ 1.698367] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
  128. [ 1.698498] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
  129. [ 1.698628] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
  130. [ 1.698755] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
  131. [ 1.698905] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
  132. [ 1.699035] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
  133. [ 1.699164] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
  134. [ 1.699293] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
  135. [ 1.711554] u32 classifier
  136. [ 1.711557] Actions configured
  137. [ 1.711628] Initializing XFRM netlink socket
  138. [ 1.712338] NET: Registered protocol family 10
  139. [ 1.713069] NET: Registered protocol family 17
  140. [ 1.713080] NET: Registered protocol family 15
  141. [ 1.713154] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  142. [ 1.713257] Bluetooth: RFCOMM socket layer initialized
  143. [ 1.713267] Bluetooth: RFCOMM ver 1.11
  144. [ 1.713272] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  145. [ 1.713277] Bluetooth: HIDP socket layer initialized
  146. [ 1.713295] 9pnet: Installing 9P2000 support
  147. [ 1.713330] Key type dns_resolver registered
  148. [ 1.713716] Registered cp15_barrier emulation handler
  149. [ 1.713723] Registered setend emulation handler
  150. [ 1.715102] registered taskstats version 1
  151. [ 1.715644] Adding domain ve2-pd to PM domain host1x-pd
  152. [ 1.715900] Adding domain ve-pd to PM domain host1x-pd
  153. [ 1.718499] isp 54600000.isp: initialized
  154. [ 1.719537] isp 54680000.isp: initialized
  155. [ 1.729731] last reset is due to software reset
  156. [ 1.729735] KERNEL: PMC reset status reg: 0x3
  157. [ 1.729799] BL: PMC reset status reg: 0x3
  158. [ 1.729802] BL: PMIC poweroff Event Recorder: 0x0
  159. [ 1.731388] clk_cbus_recalc_rate: no gbus parent
  160. [ 1.731393] clk_cbus_round_rate: no gbus parent
  161. [ 1.731396] clk_cbus_round_rate: no gbus parent
  162. [ 1.731402] clk_cbus_recalc_rate: no gbus parent
  163. [ 1.731569] clk_cbus_recalc_rate: no gbus parent
  164. [ 1.731573] clk_cbus_round_rate: no gbus parent
  165. [ 1.731575] clk_cbus_round_rate: no gbus parent
  166. [ 1.731579] clk_cbus_recalc_rate: no gbus parent
  167. [ 1.732323] tegra_dvfs: GPU-cap: registered
  168. [ 1.732386] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
  169. [ 1.732389] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
  170. [ 1.732391] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled
  171. [ 1.733763] tegra_dvfs: vdd-gpu-vts: registered
  172. [ 1.734481] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
  173. [ 1.735097] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
  174. [ 1.735605] input: gpio-keys as /devices/gpio-keys/input/input1
  175. [ 1.769549] tegra_rtc 7000e000.rtc: setting system clock to 2022-02-17 22:30:02 UTC (1645137002)
  176. [ 1.770573] vi 54080000.vi: vi_probe: ++
  177. [ 1.787191] vi 54080000.vi: initialized
  178. [ 1.793526] vi 54080000.vi: subdev nvcsi--1 bound
  179. [ 1.793543] vi 54080000.vi: subdev imx477 6-001a bound
  180. [ 1.795024] Disable partitions left on by BL
  181. [ 1.795027] disb
  182. [ 1.795070] bwmgr: missing cdev-type property
  183. [ 1.795195] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  184. [ 1.795203] DRAM derating cdev registered.
  185. [ 1.796205] ALSA device list:
  186. [ 1.796208] #0: tegra-hda at 0x70038000 irq 83
  187. [ 1.796210] #1: tegra-snd-t210ref-mobile-rt565x
  188. [ 1.799359] Freeing unused kernel memory: 8640K
  189. [ 1.823648] Root device found: mmcblk0p1
  190. [ 1.855537] usb 2-1: usb_suspend_both: status 0
  191. [ 1.855716] usb usb2: usb_suspend_both: status 0
  192. [ 1.887495] mmc0: hw tuning done ...
  193. [ 1.887550] mmc0: new ultra high speed SDR104 SDXC card at address 0001
  194. [ 1.888029] mmcblk0: mmc0:0001 GD4QT 119 GiB
  195. [ 1.892126] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
  196. [ 1.894828] tegra-pcie 1003000.pcie: link 0 down, retrying
  197. [ 2.028630] Found dev node: /dev/mmcblk0p1
  198. [ 2.081995] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  199. [ 2.083959] Rootfs mounted over mmcblk0p1
  200. [ 2.102849] tegra_cec 70015000.tegra_cec: physical address: 10:00.
  201. [ 2.105540] Switching from initrd to actual rootfs
  202. [ 2.167369] tegra_cec 70015000.tegra_cec: Sent <Text View On> res: -113.
  203. [ 2.167373] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
  204. [ 2.298898] tegra-pcie 1003000.pcie: link 0 down, retrying
  205. [ 2.300917] tegra-pcie 1003000.pcie: link 0 down, ignoring
  206. [ 2.310010] ip_tables: (C) 2000-2006 Netfilter Core Team
  207. [ 2.322909] cgroup: cgroup2: unknown option "nsdelegate"
  208. [ 2.342151] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  209. [ 2.342959] systemd[1]: Detected architecture arm64.
  210. [ 2.365188] systemd[1]: Set hostname to <jetson>.
  211. [ 2.404448] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
  212. [ 2.404454] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  213. [ 2.404459] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
  214. [ 2.404462] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
  215. [ 2.404467] pci_bus 0000:00: root bus resource [bus 00-ff]
  216. [ 2.404490] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
  217. [ 2.404553] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  218. [ 2.404709] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  219. [ 2.404830] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  220. [ 2.404855] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
  221. [ 2.404884] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
  222. [ 2.404904] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  223. [ 2.405038] pci 0000:01:00.0: supports D1 D2
  224. [ 2.405041] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  225. [ 2.414927] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  226. [ 2.414957] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
  227. [ 2.414962] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
  228. [ 2.414969] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
  229. [ 2.414987] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
  230. [ 2.415004] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
  231. [ 2.415012] pci 0000:00:02.0: PCI bridge to [bus 01]
  232. [ 2.415016] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
  233. [ 2.415143] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
  234. [ 2.415446] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
  235. [ 2.415449] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  236. [ 2.415455] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
  237. [ 2.415689] aer 0000:00:02.0:pcie002: service driver aer loaded
  238. [ 2.415886] r8168 0000:01:00.0: enabling device (0000 -> 0003)
  239. [ 2.415924] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
  240. [ 2.430015] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
  241. [ 2.430092] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e3:fc:15 from device tree
  242. [ 2.430528] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
  243. [ 2.430543] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
  244. This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  245. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  246. [ 2.517114] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  247. [ 2.517123] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  248. [ 2.692994] random: systemd: uninitialized urandom read (16 bytes read)
  249. [ 2.694756] systemd[1]: Created slice User and Session Slice.
  250. [ 2.694903] random: systemd: uninitialized urandom read (16 bytes read)
  251. [ 2.694924] systemd[1]: Reached target User and Group Name Lookups.
  252. [ 2.694957] random: systemd: uninitialized urandom read (16 bytes read)
  253. [ 2.694977] systemd[1]: Reached target Swap.
  254. [ 2.695034] systemd[1]: Reached target Libvirt guests shutdown.
  255. [ 2.695863] systemd[1]: Created slice System Slice.
  256. [ 2.745207] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
  257. [ 2.871562] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
  258. [ 2.998080] systemd-journald[2037]: Received request to flush runtime journal from PID 1
  259. [ 3.178863] tegra-xusb 70090000.xusb: entering ELPG
  260. [ 3.179892] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3
  261. [ 3.180084] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0
  262. [ 3.181656] tegra-xusb 70090000.xusb: entering ELPG done
  263. [ 3.597833] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  264. [ 3.597856] cpu-throttle-alert cooling device registered.
  265. [ 3.597993] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  266. [ 3.598009] gpu-throttle-alert cooling device registered.
  267. [ 3.598167] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  268. [ 3.598180] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
  269. [ 3.598192] hot-surface-alert cooling device registered.
  270. [ 4.881258] using random self ethernet address
  271. [ 4.885860] using random host ethernet address
  272. [ 5.199463] random: crng init done
  273. [ 5.202902] random: 7 urandom warning(s) missed due to ratelimiting
  274. [ 6.200092] Mass Storage Function, version: 2009/09/11
  275. [ 6.200099] LUN: removable file: (no medium)
  276. [ 6.210163] using random self ethernet address
  277. [ 6.214988] using random host ethernet address
  278. [ 6.311846] rndis0: HOST MAC 72:ea:22:95:5a:20
  279. [ 6.315223] rndis0: MAC 72:ea:22:95:5a:21
  280. [ 6.319382] usb0: HOST MAC 72:ea:22:95:5a:22
  281. [ 6.319411] usb0: MAC 72:ea:22:95:5a:23
  282. [ 6.319432] tegra-xudc-new 700d0000.xudc: exiting ELPG
  283. [ 6.323259] tegra-xudc-new 700d0000.xudc: exiting ELPG done
  284. [ 6.323279] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
  285. [ 6.323324] tegra-xudc-new 700d0000.xudc: entering ELPG
  286. [ 6.323706] tegra-xudc-new 700d0000.xudc: entering ELPG done
  287. [ 6.323745] tegra-xudc-new 700d0000.xudc: exiting ELPG
  288. [ 6.324443] tegra-xudc-new 700d0000.xudc: exiting ELPG done
  289. [ 6.324457] tegra-xudc-new 700d0000.xudc: entering ELPG
  290. [ 6.324810] tegra-xudc-new 700d0000.xudc: entering ELPG done
  291. [ 6.335426] l4tbr0: port 1(rndis0) entered blocking state
  292. [ 6.335431] l4tbr0: port 1(rndis0) entered disabled state
  293. [ 6.335598] device rndis0 entered promiscuous mode
  294. [ 6.347034] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  295. [ 6.352229] l4tbr0: port 2(usb0) entered blocking state
  296. [ 6.352235] l4tbr0: port 2(usb0) entered disabled state
  297. [ 6.352813] device usb0 entered promiscuous mode
  298. [ 6.366964] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  299. [ 6.381029] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  300. [ 6.382183] eth0: 0xffffff800aba7000, 00:04:4b:e3:fc:15, IRQ 407
  301. [ 6.432408] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  302. [ 7.970019] ip6_tables: (C) 2000-2006 Netfilter Core Team
  303. [ 8.180108] zram: Added device: zram0
  304. [ 8.183359] zram: Added device: zram1
  305. [ 8.184408] zram: Added device: zram2
  306. [ 8.184961] zram: Added device: zram3
  307. [ 8.219336] zram0: detected capacity change from 0 to 518533120
  308. [ 8.290039] Adding 506376k swap on /dev/zram0. Priority:5 extents:1 across:506376k SS
  309. [ 8.294433] zram1: detected capacity change from 0 to 518533120
  310. [ 8.314300] Adding 506376k swap on /dev/zram1. Priority:5 extents:1 across:506376k SS
  311. [ 8.318035] zram2: detected capacity change from 0 to 518533120
  312. [ 8.328566] Adding 506376k swap on /dev/zram2. Priority:5 extents:1 across:506376k SS
  313. [ 8.332347] zram3: detected capacity change from 0 to 518533120
  314. [ 8.344477] Adding 506376k swap on /dev/zram3. Priority:5 extents:1 across:506376k SS
  315. [ 8.671521] virbr0: port 1(virbr0-nic) entered blocking state
  316. [ 8.671526] virbr0: port 1(virbr0-nic) entered disabled state
  317. [ 8.671650] device virbr0-nic entered promiscuous mode
  318. [ 9.002979] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  319. [ 9.134878] virbr0: port 1(virbr0-nic) entered blocking state
  320. [ 9.134883] virbr0: port 1(virbr0-nic) entered listening state
  321. [ 9.265303] virbr0: port 1(virbr0-nic) entered disabled state
  322. [ 9.494837] r8168: eth0: link up
  323. [ 9.494870] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  324. [ 10.073031] tegradc tegradc.0: unblank
  325. [ 10.073042] tegradc tegradc.1: blank - powerdown
  326. [ 13.017083] fuse init (API version 7.26)
  327. [ 15.417395] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  328. [ 15.417407] Bluetooth: BNEP socket layer initialized
  329. [ 16.218311] tegradc tegradc.0: unblank
  330. [ 16.218321] tegradc tegradc.1: blank - powerdown
  331. [ 21.330862] video4linux video0: frame start syncpt timeout!0
  332. [ 21.538931] video4linux video0: frame start syncpt timeout!0
  333. [ 21.746875] video4linux video0: frame start syncpt timeout!0
  334. [ 21.955006] video4linux video0: frame start syncpt timeout!0
  335. [ 22.162904] video4linux video0: frame start syncpt timeout!0
  336. [ 22.370842] video4linux video0: frame start syncpt timeout!0
  337. [ 22.578849] video4linux video0: frame start syncpt timeout!0
  338. [ 22.786936] video4linux video0: frame start syncpt timeout!0
  339. [ 22.994875] video4linux video0: frame start syncpt timeout!0
  340. [ 23.202862] video4linux video0: frame start syncpt timeout!0
  341. [ 23.410959] video4linux video0: frame start syncpt timeout!0
  342. [ 23.618911] video4linux video0: frame start syncpt timeout!0
  343. [ 23.827059] video4linux video0: frame start syncpt timeout!0
  344. [ 24.035658] video4linux video0: frame start syncpt timeout!0
  345. [ 24.242979] video4linux video0: frame start syncpt timeout!0
  346. [ 24.451706] video4linux video0: frame start syncpt timeout!0
  347. [ 24.659446] video4linux video0: frame start syncpt timeout!0
  348. [ 24.867461] video4linux video0: frame start syncpt timeout!0
  349. [ 25.075487] video4linux video0: frame start syncpt timeout!0
  350. [ 25.283425] video4linux video0: frame start syncpt timeout!0
  351. [ 25.491470] video4linux video0: frame start syncpt timeout!0
  352. [ 25.699410] video4linux video0: frame start syncpt timeout!0
  353. [ 25.907447] video4linux video0: frame start syncpt timeout!0
  354. [ 26.115423] video4linux video0: frame start syncpt timeout!0
  355. [ 26.323306] video4linux video0: frame start syncpt timeout!0
  356. [ 26.531712] video4linux video0: frame start syncpt timeout!0
  357. [ 26.739478] video4linux video0: frame start syncpt timeout!0
  358. [ 26.947545] video4linux video0: frame start syncpt timeout!0
  359. [ 27.155119] video4linux video0: frame start syncpt timeout!0
  360. [ 27.363467] video4linux video0: frame start syncpt timeout!0
  361. [ 27.571363] video4linux video0: frame start syncpt timeout!0
  362. [ 27.779389] video4linux video0: frame start syncpt timeout!0
  363. [ 27.987390] video4linux video0: frame start syncpt timeout!0
  364. [ 28.195461] video4linux video0: frame start syncpt timeout!0
  365. [ 28.403450] video4linux video0: frame start syncpt timeout!0
  366. [ 28.611442] video4linux video0: frame start syncpt timeout!0
  367. [ 28.819430] video4linux video0: frame start syncpt timeout!0
  368. [ 29.027547] video4linux video0: frame start syncpt timeout!0
  369. [ 29.235481] video4linux video0: frame start syncpt timeout!0
  370. [ 29.443468] video4linux video0: frame start syncpt timeout!0
  371. [ 29.651428] video4linux video0: frame start syncpt timeout!0
  372. [ 29.859497] video4linux video0: frame start syncpt timeout!0
  373. [ 30.067451] video4linux video0: frame start syncpt timeout!0
  374. [ 30.275457] video4linux video0: frame start syncpt timeout!0
  375. [ 30.483443] video4linux video0: frame start syncpt timeout!0
  376. [ 30.691417] video4linux video0: frame start syncpt timeout!0
  377. [ 30.899462] video4linux video0: frame start syncpt timeout!0
  378. [ 31.107833] video4linux video0: frame start syncpt timeout!0
  379. [ 31.315453] video4linux video0: frame start syncpt timeout!0
  380. [ 31.523623] video4linux video0: frame start syncpt timeout!0
  381. [ 31.731426] video4linux video0: frame start syncpt timeout!0
  382. [ 31.865331] vdd-fan: disabling
  383. [ 31.865374] vdd-usb-vbus: disabling
  384. [ 31.865406] vdd-usb-vbus2: disabling
  385. [ 31.865507] avdd-io-edp-1v05: disabling
  386. [ 31.939433] video4linux video0: frame start syncpt timeout!0
  387. [ 32.147621] video4linux video0: frame start syncpt timeout!0
  388. [ 32.355450] video4linux video0: frame start syncpt timeout!0
  389. [ 32.563453] video4linux video0: frame start syncpt timeout!0
  390. [ 32.771704] video4linux video0: frame start syncpt timeout!0
  391. [ 32.979413] video4linux video0: frame start syncpt timeout!0
  392. [ 33.187686] video4linux video0: frame start syncpt timeout!0
  393. [ 33.395398] video4linux video0: frame start syncpt timeout!0
  394. [ 33.603419] video4linux video0: frame start syncpt timeout!0
  395. [ 33.811402] video4linux video0: frame start syncpt timeout!0
  396. [ 34.019263] video4linux video0: frame start syncpt timeout!0
  397. [ 34.227427] video4linux video0: frame start syncpt timeout!0
  398. [ 34.435453] video4linux video0: frame start syncpt timeout!0
  399. [ 34.643655] video4linux video0: frame start syncpt timeout!0
  400. [ 34.851522] video4linux video0: frame start syncpt timeout!0
  401. [ 35.059562] video4linux video0: frame start syncpt timeout!0
  402. [ 35.267188] video4linux video0: frame start syncpt timeout!0
  403. [ 35.475472] video4linux video0: frame start syncpt timeout!0
  404. [ 35.683454] video4linux video0: frame start syncpt timeout!0
  405. [ 35.891605] video4linux video0: frame start syncpt timeout!0
  406. [ 36.099470] video4linux video0: frame start syncpt timeout!0
  407. [ 36.307439] video4linux video0: frame start syncpt timeout!0
  408. [ 36.515095] video4linux video0: frame start syncpt timeout!0
  409. [ 36.723409] video4linux video0: frame start syncpt timeout!0
  410. [ 36.931598] video4linux video0: frame start syncpt timeout!0
  411. [ 37.139033] video4linux video0: frame start syncpt timeout!0
  412. [ 37.351035] video4linux video0: frame start syncpt timeout!0
  413. [ 37.559069] video4linux video0: frame start syncpt timeout!0
  414. [ 37.767483] video4linux video0: frame start syncpt timeout!0
  415. [ 37.975600] video4linux video0: frame start syncpt timeout!0
  416. [ 38.183408] video4linux video0: frame start syncpt timeout!0
  417. [ 38.391605] video4linux video0: frame start syncpt timeout!0
  418. [ 38.599411] video4linux video0: frame start syncpt timeout!0
  419. [ 38.807469] video4linux video0: frame start syncpt timeout!0
  420. [ 39.015567] video4linux video0: frame start syncpt timeout!0
  421. [ 39.223762] video4linux video0: frame start syncpt timeout!0
  422. [ 39.431116] video4linux video0: frame start syncpt timeout!0
  423. [ 39.639424] video4linux video0: frame start syncpt timeout!0
  424. [ 39.847656] video4linux video0: frame start syncpt timeout!0
  425. [ 40.055474] video4linux video0: frame start syncpt timeout!0
  426. [ 40.263483] video4linux video0: frame start syncpt timeout!0
  427. [ 40.471448] video4linux video0: frame start syncpt timeout!0
  428. [ 40.679440] video4linux video0: frame start syncpt timeout!0
  429. [ 40.887436] video4linux video0: frame start syncpt timeout!0
  430. [ 41.095682] video4linux video0: frame start syncpt timeout!0
  431. [ 41.303548] video4linux video0: frame start syncpt timeout!0
  432. [ 41.511444] video4linux video0: frame start syncpt timeout!0
  433. [ 41.719315] video4linux video0: frame start syncpt timeout!0
  434. [ 41.927441] video4linux video0: frame start syncpt timeout!0
  435. [ 42.135455] video4linux video0: frame start syncpt timeout!0
  436. [ 42.343326] video4linux video0: frame start syncpt timeout!0
  437. [ 42.551448] video4linux video0: frame start syncpt timeout!0
  438. [ 42.759484] video4linux video0: frame start syncpt timeout!0
  439. [ 42.967807] video4linux video0: frame start syncpt timeout!0
  440. [ 43.175144] video4linux video0: frame start syncpt timeout!0
  441. [ 43.383635] video4linux video0: frame start syncpt timeout!0
  442. [ 43.591433] video4linux video0: frame start syncpt timeout!0
  443. [ 43.799445] video4linux video0: frame start syncpt timeout!0
  444. [ 44.007448] video4linux video0: frame start syncpt timeout!0
  445. [ 44.215458] video4linux video0: frame start syncpt timeout!0
  446. [ 44.423452] video4linux video0: frame start syncpt timeout!0
  447. [ 44.631432] video4linux video0: frame start syncpt timeout!0
  448. [ 44.839451] video4linux video0: frame start syncpt timeout!0
  449. [ 45.047443] video4linux video0: frame start syncpt timeout!0
  450. [ 45.255446] video4linux video0: frame start syncpt timeout!0
  451. [ 45.463439] video4linux video0: frame start syncpt timeout!0
  452. [ 45.671336] video4linux video0: frame start syncpt timeout!0
  453. [ 45.879438] video4linux video0: frame start syncpt timeout!0
  454. [ 46.087440] video4linux video0: frame start syncpt timeout!0
  455. [ 46.295440] video4linux video0: frame start syncpt timeout!0
  456. [ 46.503632] video4linux video0: frame start syncpt timeout!0
  457. [ 46.711448] video4linux video0: frame start syncpt timeout!0
  458. [ 46.919596] video4linux video0: frame start syncpt timeout!0
  459. [ 47.127180] video4linux video0: frame start syncpt timeout!0
  460. [ 47.334974] video4linux video0: frame start syncpt timeout!0
  461. [ 47.543469] video4linux video0: frame start syncpt timeout!0
  462. [ 47.751428] video4linux video0: frame start syncpt timeout!0
  463. [ 47.959444] video4linux video0: frame start syncpt timeout!0
  464. [ 48.167458] video4linux video0: frame start syncpt timeout!0
  465. [ 48.375448] video4linux video0: frame start syncpt timeout!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement