Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- initarm: console initialized
- arg1 kmdp = 0xc044cd00
- boothowto = 0x00000000
- dtbp = 0xc040d908
- kernel image addresses:
- kernbase = 0xc0000000
- _etext (sdata) = 0xc0393458
- _edata = 0xc04310f8
- __bss_start = 0xc04310f8
- _end = 0xc044ffcc
- loader passed (static) kenv:
- no env, null ptr
- processing avail regions:
- 90000000-b0000000 -> 90000000-90100000 = 100000
- 90545000-b0000000 -> 90545000-b0000000 = 1fabb000
- fill in phys_avail:
- region: 0x90000000 - 0x90100000 (0x00100000)
- region: 0x90545000 - 0xb0000000 (0x1fabb000)
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- fdt_devmap:
- VA: 0xf0000000
- PA: 0x70000000
- Size: 0x04000000
- fdt_devmap:
- VA: 0x00000000
- PA: 0x00000000
- Size: 0x00000000
- fdt_devmap:
- VA: 0x00000000
- PA: 0x00000000
- Size: 0x00000000
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 10.0-CURRENT #169 r0:239333M: Fri Aug 24 03:21:20 EEST 2012
- [email protected]:/usr/obj/arm.armv6/usr/1/MIPS_FreeBSD/HEAD/head/sys/EFIKA_MX_SMARTTOP arm
- Preloaded elf kernel "kernel" at 0xc044cd00.
- CPU: Cortex A8-r2 rev 5 (Cortex-A core)
- Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
- WB disabled EABT branch prediction enabled
- LoUU:2 LoC:2 LoUIS:1
- Cache level 1:
- 32KB/64B 4-way data cache WT WB Read-Alloc
- 32KB/64B 4-way instruction cache Read-Alloc
- Cache level 2:
- 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
- real memory = 536870912 (512 MB)
- Physical memory chunk(s):
- 0x90000000 - 0x900fffff, 1048576 bytes (256 pages)
- 0x90545000 - 0xaf629fff, 521031680 bytes (127205 pages)
- avail memory = 519811072 (495 MB)
- pmap_fault_fix: pmap:0xc044e070 va:ffff1000 ftype:3 user:1random device not loaded; using insecure entropy
- mem: <memory>
- null: <null device, zero device>
- random: <entropy source, Software, Yarrow>
- openfirm: <Open Firmware control device>
- fdtbus_identify(): fdtbus_identify(driver=0xc040f0f8, parent=0xc2cd1180)
- fdtbus_probe(): fdtbus_probe(dev=0xc2c9b980); pass=2147483647
- fdtbus_probe(): fdtbus_probe(dev=0xc2c9b980); pass=2147483647
- fdtbus0: <FDT main bus>
- newbus_device_from_fdt_node(): skipping instantiating FDT device='chosen'
- newbus_device_from_fdt_node(): skipping instantiating FDT device='aliases'
- newbus_device_from_fdt_node(): skipping instantiating FDT device='memory'
- newbus_device_create(): added child name='tz-interrupt-controller@e0000000', node=0x240
- newbus_device_create(): added child name='clocks', node=0x2e0
- newbus_device_create(): added child name='imx515', node=0x428
- tzic0: <TrustZone Interrupt Controller> mem 0xd00c7ac4-0xd00cbac3 on fdtbus0
- 00: 00000000
- 04: 00000403
- 08: deadbeef
- 0c: 00000000
- 10: 00000000
- 14: 00000000
- 80: 00000000
- 84: 00000000
- 88: 00000000
- 8c: 00000000
- 100: 00000000
- 104: 00000000
- 108: 00000000
- 10c: 00000000
- 180: 00000000
- 184: 00000000
- 188: 00000000
- 18c: 00000000
- 200: 00000000
- 204: 00000000
- 208: 00200000
- 20c: 00000050
- 280: 00000000
- 284: 00000000
- 288: 00200000
- 28c: 00000050
- 400: 00000000
- 404: 00000000
- 408: 00000000
- 40c: 00000000
- 410: 00000000
- 414: 00000000
- 418: 00000000
- 41c: 00000000
- 420: 00000000
- 424: 00000000
- 428: 00000000
- 42c: 00000000
- 430: 00000000
- 434: 00000000
- 438: 00000000
- 43c: 00000000
- 440: 00000000
- 444: 00000000
- 448: 00000000
- 44c: 00000000
- 450: 00000000
- 454: 00000000
- 458: 00000000
- 45c: 00000000
- 460: 00000000
- 464: 00000000
- 468: 00000000
- 46c: 00000000
- 470: 00000000
- 474: 00000000
- 478: 00000000
- 47c: 00000000
- d00: 00000000
- d04: 00000000
- d08: 00000000
- d0c: 00000000
- d80: 00000000
- d84: 00000000
- d88: 00000000
- d8c: 00000000
- f00: 00000000
- tzic0: interrupts 128, BH=0xd00cc000
- simplebus0: <Flattened device tree simple bus> on fdtbus0
- simplebus_attach: fsl,aips-bus
- simplebus_attach: fsl,aips-bus
- simplebus1: <Flattened device tree simple bus> mem 0xd00d0000-0xd40cffff on simplebus0
- simplebus_attach: fsl,spba-bus
- simplebus_attach: fsl,imx51-gpio
- simplebus_attach: fsl,imx51-gpio
- simplebus_attach: fsl,imx51-gpio
- simplebus_attach: fsl,imx51-gpio
- simplebus_attach: fsl,imx51-wdt
- simplebus_attach: fsl,imx51-wdt
- simplebus_attach: fsl,imx51-epit
- simplebus_attach: fsl,imx51-uart
- simplebus_attach: fsl,imx51-uart
- simplebus_attach: fsl,imx51-ehci
- simplebus2: <Flattened device tree simple bus> mem 0xf0000000-0xf003ffff on simplebus1
- simplebus_attach: fsl,imx51-esdhc
- simplebus_attach: fsl,imx51-esdhc
- simplebus_attach: fsl,imx51-uart
- simplebus_attach: fsl,imx51-ecspi
- simplebus_attach: fsl,imx51-ssi
- simplebus_attach: fsl,imx51-esdhc
- simplebus_attach: fsl,imx51-esdhc
- uart0: <imx_uart> mem 0xf000c000-0xf000ffff irq 33 on simplebus2
- arm_unmask_irq 33
- uart0: fast interrupt
- spi0: <Freescale i.MXxxx sCSPI controller> mem 0xf0010000-0xf0013fff irq 36 on simplebus2
- 08: 01f02031
- 0c: 00001000
- 10: 00000000
- 14: 00000000
- 18: 00000003
- 1c: 00000000
- 20: 00000000
- spibus0: <spibus bus> on spi0
- mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
- t1r0, t0r5
- tx:0 - 0x0000009f
- 0c: 00701011
- rx:0 - 0x00000000
- rx:4 - 0x00000000
- t1r0, t0r1
- tx:0 - 0x00000005
- 0c: 00701011
- rx:0 - 0x00000000
- mx25l0: at25128, sector 64 bytes, 256 sectors
- mx25l2: <M25Pxx Flash Family> at cs 1 mode 0 on spibus0
- t1r0, t0r5
- tx:0 - 0x0000009f
- 0c: 00741021
- rx:0 - 0x00000000
- rx:4 - 0x00000000
- t1r0, t0r1
- tx:0 - 0x00000005
- 0c: 00741021
- rx:0 - 0x00000000
- mx25l2: at25128, sector 64 bytes, 256 sectors
- imxclock0: <Freescale i.MXxxx EPIT timer> mem 0xf3fac000-0xf3faffff irq 40 on simplebus1
- imxclock_attach.124:enter
- imxclock_attach.132:
- imxclock_attach.138:
- imxclock_attach.153:
- arm_unmask_irq 40
- imxclock_attach.163:
- imxclock_attach.169:
- imxclock_attach.174:
- imxclock_attach.186:
- Event timer "i.MXxxx EPIT Eventtimer" frequency 665000000 Hz quality 1000
- imxclock_attach.189:
- imxclock_attach.195:done, unit=0
- uart1: <imx_uart> mem 0xf3fbc000-0xf3fbffff irq 31 on simplebus1
- arm_unmask_irq 31
- uart1: fast interrupt
- uart2: <imx_uart> mem 0xf3fc0000-0xf3fc3fff irq 32 on simplebus1
- arm_unmask_irq 32
- uart2: fast interrupt
- ehci0: <Freescale i.MXxxx EHCI USB controller> mem 0xf3fc4000-0xf3fc7fff irq 14,15,16,17 on simplebus1
- arm_unmask_irq 14
- usbus0: EHCI version 0.0
- usbus0: stop timeout
- usbus0 on ehci0
- ehci0: usbpf: Attached
- simplebus3: <Flattened device tree simple bus> mem 0xd40d0000-0xd80cffff on simplebus0
- simplebus_attach: fsl,imx51-ecspi
- simplebus_attach: fsl,imx51-sdma
- simplebus_attach: fsl,imx51-cspi
- simplebus_attach: fsl,imx51-i2c
- simplebus_attach: fsl,imx51-i2c
- simplebus_attach: fsl,imx51-ssi
- simplebus_attach: fsl,imx51-audmux
- simplebus_attach: fsl,imx51-ssi
- simplebus_attach: fsl,imx51-fec
- spi1: <Freescale i.MXxxx sCSPI controller> mem 0xd80ea000-0xd80edfff irq 37 on simplebus3
- 08: 00000000
- 0c: 00000000
- 10: 00000000
- 14: 00000000
- 18: 00000003
- 1c: 00000000
- 20: 00000000
- spibus1: <spibus bus> on spi1
- mx25l1: <M25Pxx Flash Family> at cs 0 mode 0 on spibus1
- t1r0, t0r5
- tx:0 - 0x0000009f
- 0c: 00000000
- rx:0 - 0x00000000
- rx:4 - 0x00000000
- t1r0, t0r1
- tx:0 - 0x00000005
- 0c: 00000000
- rx:0 - 0x00000000
- mx25l1: at25128, sector 64 bytes, 256 sectors
- mx25l3: <M25Pxx Flash Family> at cs 1 mode 0 on spibus1
- t1r0, t0r5
- tx:0 - 0x0000009f
- 0c: 00000000
- rx:0 - 0x00000000
- rx:4 - 0x00000000
- t1r0, t0r1
- tx:0 - 0x00000005
- 0c: 00000000
- rx:0 - 0x00000000
- mx25l3: at25128, sector 64 bytes, 256 sectors
- procfs registered
- cpu_initclocks.274:enter
- cpu_initclocks.279:
- cpu_initclocks.282:
- Timecounter "i.MX EPIT Timecouter" frequency 655000000 Hz quality 1000
- imxclock0: timer clock frequency 655000000
- clock: hz=100 stathz = 0
- cpu_initclocks.298:
- cpu_initclocks.301:
- cpu_initclocks.305:
- cpu_initclocks.313:done
- Timecounters tick every 10.000 msec
- lo0: bpf attached
- GEOM: new disk flash/spi0
- GEOM: new disk flash/spi2
- GEOM: new disk flash/spi1
- GEOM: new disk flash/spi3
- usbus0: 480Mbps High Speed USB v2.0
- ugen0.1: <Freescale> at usbus0
- uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- device_attach: uhub0 attach returned 6
- usbus0: Root HUB problem, error=USB_ERR_NO_ROOT_HUB
- Loader variables:
- Manual root filesystem specification:
- <fstype>:<device> [options]
- Mount <device> using filesystem <fstype>
- and with the specified (optional) option list.
- eg. ufs:/dev/da0s1a
- zfs:tank
- cd9660:/dev/acd0 ro
- (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
- ? List valid disk boot devices
- . Yield 1 second (for background tasks)
- <empty line> Abort manual input
- mountroot> .
Advertisement
Add Comment
Please, Sign In to add comment