API tools faq
paste
CalcProgrammer1

Note 3 Xorg log from freedreno

CalcProgrammer1
Jun 21st, 2014
244
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.98 KB | None | 0 0
raw download clone embed print report
  1. [ 603.643]
  2. X.Org X Server 1.15.1
  3. Release Date: 2014-04-13
  4. [ 603.644] X Protocol Version 11, Revision 0
  5. [ 603.644] Build Operating System: Linux 3.2.0-4-mx5 armv7l Debian
  6. [ 603.644] Current Operating System: Linux localhost 3.4.0-gce6df71-dirty #2 SMP PREEMPT Sat Jun 21 12:16:25 CDT 2014 armv7l
  7. [ 603.645] Kernel command line: console=tty0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F cont_splash=1 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x1a2b3c00 lcd_attached=1 lcd_id=0x414024 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=b3861643b085eec388045a6bfb17aceb connie=SM-N900T_TMO_USA_bb9cd6a95779589aece80a73f10eaf9e loglevel=4 samsung.hardware=SM-N900T samsung.board_rev=8 androidboot.emmc_checksum=3 androidboot.bootloader=N900TUVUBMI7 androidboot.nvdata_backup=0 androidboot.boot_recovery=0 androidboot.batt_check_recovery=0 sec_debug.pm8941_rev=3 sec_debug.pm8841_rev=2 vmalloc=450m level=0x574f4c44 sec_pvs=0 batt_id_value=0 androidboot.check_recovery_condition=0x0 androidboot.emmc=true androidboot.serialno=0a00b2ac androidboot.baseband=msm
  8. [ 603.647] Build Date: 16 April 2014 12:30:00PM
  9. [ 603.647] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
  10. [ 603.648] Current version of pixman: 0.32.4
  11. [ 603.648] Before reporting problems, check http://wiki.x.org
  12. to make sure that you have the latest version.
  13. [ 603.648] Markers: (--) probed, (**) from config file, (==) default setting,
  14. (++) from command line, (!!) notice, (II) informational,
  15. (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  16. [ 603.651] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 21 17:22:50 2014
  17. [ 603.653] (==) Using config file: "/etc/X11/xorg.conf"
  18. [ 603.653] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
  19. [ 603.657] (==) No Layout section. Using the first Screen section.
  20. [ 603.657] (==) No screen section available. Using defaults.
  21. [ 603.657] (**) |-->Screen "Default Screen Section" (0)
  22. [ 603.657] (**) | |-->Monitor "<default monitor>"
  23. [ 603.660] (==) No device specified for screen "Default Screen Section".
  24. Using the first device section listed.
  25. [ 603.660] (**) | |-->Device "freedreno"
  26. [ 603.660] (==) No monitor specified for screen "Default Screen Section".
  27. Using a default monitor configuration.
  28. [ 603.661] (==) Automatically adding devices
  29. [ 603.661] (==) Automatically enabling devices
  30. [ 603.661] (==) Automatically adding GPU devices
  31. [ 603.662] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
  32. [ 603.662] Entry deleted from font path.
  33. [ 603.663] (==) FontPath set to:
  34. /usr/share/fonts/X11/misc,
  35. /usr/share/fonts/X11/100dpi/:unscaled,
  36. /usr/share/fonts/X11/75dpi/:unscaled,
  37. /usr/share/fonts/X11/Type1,
  38. /usr/share/fonts/X11/100dpi,
  39. /usr/share/fonts/X11/75dpi,
  40. built-ins
  41. [ 603.663] (==) ModulePath set to "/usr/lib/xorg/modules"
  42. [ 603.663] (II) The server relies on udev to provide the list of input devices.
  43. If no devices become available, reconfigure udev or disable AutoAddDevices.
  44. [ 603.664] (II) Loader magic: 0xb6f43ef8
  45. [ 603.664] (II) Module ABI versions:
  46. [ 603.664] X.Org ANSI C Emulation: 0.4
  47. [ 603.664] X.Org Video Driver: 15.0
  48. [ 603.664] X.Org XInput driver : 20.0
  49. [ 603.665] X.Org Server Extension : 8.0
  50. [ 603.667] (II) xfree86: Adding drm device (/dev/dri/card0)
  51. [ 603.669] Initializing built-in extension Generic Event Extension
  52. [ 603.669] Initializing built-in extension SHAPE
  53. [ 603.669] Initializing built-in extension MIT-SHM
  54. [ 603.669] Initializing built-in extension XInputExtension
  55. [ 603.670] Initializing built-in extension XTEST
  56. [ 603.670] Initializing built-in extension BIG-REQUESTS
  57. [ 603.670] Initializing built-in extension SYNC
  58. [ 603.671] Initializing built-in extension XKEYBOARD
  59. [ 603.671] Initializing built-in extension XC-MISC
  60. [ 603.671] Initializing built-in extension SECURITY
  61. [ 603.671] Initializing built-in extension XINERAMA
  62. [ 603.672] Initializing built-in extension XFIXES
  63. [ 603.672] Initializing built-in extension RENDER
  64. [ 603.672] Initializing built-in extension RANDR
  65. [ 603.672] Initializing built-in extension COMPOSITE
  66. [ 603.673] Initializing built-in extension DAMAGE
  67. [ 603.673] Initializing built-in extension MIT-SCREEN-SAVER
  68. [ 603.673] Initializing built-in extension DOUBLE-BUFFER
  69. [ 603.673] Initializing built-in extension RECORD
  70. [ 603.674] Initializing built-in extension DPMS
  71. [ 603.674] Initializing built-in extension Present
  72. [ 603.674] Initializing built-in extension DRI3
  73. [ 603.674] Initializing built-in extension X-Resource
  74. [ 603.675] Initializing built-in extension XVideo
  75. [ 603.675] Initializing built-in extension XVideo-MotionCompensation
  76. [ 603.675] Initializing built-in extension SELinux
  77. [ 603.676] Initializing built-in extension XFree86-VidModeExtension
  78. [ 603.676] Initializing built-in extension XFree86-DGA
  79. [ 603.676] Initializing built-in extension XFree86-DRI
  80. [ 603.676] Initializing built-in extension DRI2
  81. [ 603.677] (II) LoadModule: "glx"
  82. [ 603.679] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
  83. [ 603.683] (II) Module glx: vendor="X.Org Foundation"
  84. [ 603.683] compiled for 1.15.1, module version = 1.0.0
  85. [ 603.684] ABI class: X.Org Server Extension, version 8.0
  86. [ 603.684] (==) AIGLX enabled
  87. [ 603.684] Loading extension GLX
  88. [ 603.684] (II) LoadModule: "freedreno"
  89. [ 603.687] (II) Loading /usr/lib/xorg/modules/drivers/freedreno_drv.so
  90. [ 603.690] (II) Module freedreno: vendor="X.Org Foundation"
  91. [ 603.690] compiled for 1.15.1, module version = 1.1.0
  92. [ 603.690] ABI class: X.Org Video Driver, version 15.0
  93. [ 603.690] (II) freedreno: Video driver for Qualcomm processors
  94. [ 603.691] (++) using VT number 7
  95.  
  96. [ 603.691] (WW) xf86OpenConsole: setsid failed: Operation not permitted
  97. [ 603.692] (WW) Falling back to old probe method for freedreno
  98. [ 603.887] (II) No msm DRM/KMS, fallback to fbdev/kgsl
  99. [ 603.887] (II) Section 0 - looking for /dev/graphics/fb0
  100. [ 604.300] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
  101. [ 604.301] (II) freedreno(0): MSMPreInit:179 pre-init
  102. [ 604.301] (--) freedreno(0): Depth 0, (--) framebuffer bpp 0
  103. [ 604.301] (II) freedreno(0): MSM/Qualcomm processor
  104. [ 604.301] drmOpenDevice: node name is /dev/dri/card0
  105. [ 604.302] drmOpenDevice: open result is 7, (OK)
  106. [ 604.302] drmOpenDevice: node name is /dev/dri/card0
  107. [ 604.302] drmOpenDevice: open result is 7, (OK)
  108. [ 604.303] drmOpenDevice: node name is /dev/dri/card0
  109. [ 604.303] drmOpenDevice: open result is 7, (OK)
  110. [ 604.303] drmOpenDevice: node name is /dev/dri/card1
  111. [ 604.316] drmOpenDevice: node name is /dev/dri/card2
  112. [ 604.329] drmOpenDevice: node name is /dev/dri/card3
  113. [ 604.342] drmOpenDevice: node name is /dev/dri/card4
  114. [ 604.355] drmOpenDevice: node name is /dev/dri/card5
  115. [ 604.368] drmOpenDevice: node name is /dev/dri/card6
  116. [ 604.381] drmOpenDevice: node name is /dev/dri/card7
  117. [ 604.394] drmOpenDevice: node name is /dev/dri/card8
  118. [ 604.407] drmOpenDevice: node name is /dev/dri/card9
  119. [ 604.420] drmOpenDevice: node name is /dev/dri/card10
  120. [ 604.434] drmOpenDevice: node name is /dev/dri/card11
  121. [ 604.446] drmOpenDevice: node name is /dev/dri/card12
  122. [ 604.459] drmOpenDevice: node name is /dev/dri/card13
  123. [ 604.472] drmOpenDevice: node name is /dev/dri/card14
  124. [ 604.485] drmOpenDevice: node name is /dev/dri/card15
  125. [ 604.500] drmOpenDevice: node name is /dev/dri/card0
  126. [ 604.500] drmOpenDevice: open result is 7, (OK)
  127. [ 604.500] drmOpenDevice: node name is /dev/dri/card0
  128. [ 604.501] drmOpenDevice: open result is 7, (OK)
  129. [ 604.501] drmOpenDevice: node name is /dev/dri/card0
  130. [ 604.501] drmOpenDevice: open result is 7, (OK)
  131. [ 604.502] drmGetBusid returned ''
  132. [ 604.777] (WW) freedreno(0): WARNING: Unable to determine the MDP version - assume 3.1
  133. [ 604.810] (II) freedreno(0): Creating default Display subsection in Screen section
  134. "Default Screen Section" for depth/fbbpp 24/32
  135. [ 604.811] (II) freedreno(0): Output default has no monitor section
  136. [ 604.811] (II) freedreno(0): Printing probed modes for output default
  137. [ 604.812] (II) freedreno(0): Modeline "1080x1920"x60.0 149.77 1080 1242 1252 1288 1920 1933 1935 1938 (116.3 kHz Pb)
  138. [ 604.812] (II) freedreno(0): Output default connected
  139. [ 604.812] (II) freedreno(0): Using exact sizes for initial modes
  140. [ 604.812] (II) freedreno(0): Output default using initial mode 1080x1920
  141. [ 604.813] (II) freedreno(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
  142. [ 604.813] (**) freedreno(0): Option "fb" "/dev/graphics/fb0"
  143. [ 604.813] (II) freedreno(0): Option Summary:
  144. [ 604.814] (II) freedreno(0): NoAccel: 0
  145. [ 604.814] (II) freedreno(0): HWCursor: 1
  146. [ 604.814] (II) freedreno(0): examask: 7
  147. [ 604.814] (II) freedreno(0): fb: /dev/graphics/fb0
  148. [ 604.814] (II) freedreno(0): SWRefresher: 1
  149. [ 604.814] (II) freedreno(0): Debug: 0
  150. [ 604.815] (--) freedreno(0): Virtual size is 1080x1920 (pitch 1088)
  151. [ 604.815] (**) freedreno(0): Built-in mode "1080x1920": 149.8 MHz (scaled from 0.0 MHz), 116.3 kHz, 60.0 Hz
  152. [ 604.815] (II) freedreno(0): Modeline "1080x1920"x0.0 149.77 1080 1242 1252 1288 1920 1933 1935 1938 (116.3 kHz Pb)
  153. [ 604.815] (==) freedreno(0): DPI set to (96, 96)
  154. [ 604.816] (==) freedreno(0): RGB weight 888
  155. [ 604.816] (==) freedreno(0): Default visual is TrueColor
  156. [ 604.816] (II) freedreno(0): MSM Options:
  157. [ 604.816] (II) freedreno(0): HW Cursor: Enabled
  158. [ 604.817] (==) Depth 24 pixmap format is 32 bpp
  159. [ 604.817] (II) Loading sub module "fb"
  160. [ 604.817] (II) LoadModule: "fb"
  161. [ 604.818] (II) Loading /usr/lib/xorg/modules/libfb.so
  162. [ 604.820] (II) Module fb: vendor="X.Org Foundation"
  163. [ 604.821] compiled for 1.15.1, module version = 1.0.0
  164. [ 604.821] ABI class: X.Org ANSI C Emulation, version 0.4
  165. [ 604.822] (==) freedreno(0): Backing store enabled
  166. [ 604.822] (II) Loading sub module "exa"
  167. [ 604.822] (II) LoadModule: "exa"
  168. [ 604.826] (II) Loading /usr/lib/xorg/modules/libexa.so
  169. [ 604.827] (II) Module exa: vendor="X.Org Foundation"
  170. [ 604.827] compiled for 1.15.1, module version = 2.6.0
  171. [ 604.828] ABI class: X.Org Video Driver, version 15.0
  172. [ 604.828] [E] could not open /dev/kgsl-2d0 device: -1 (No such file or directory) (kgsl_pipe_new:216)
  173. [ 604.828] [E] allocation failed (fd_pipe_new:43)
  174. [ 604.828] (II) freedreno(0): no 2D pipe, falling back to software!
  175. [ 604.833] [I] Pipe Info: (kgsl_pipe_new:245)
  176. [ 604.834] [I] Device: /dev/kgsl-3d0 (kgsl_pipe_new:246)
  177. [ 604.834] [I] Chip-id: 3.3.0.1 (kgsl_pipe_new:251)
  178. [ 604.834] [I] Device-id: 1 (kgsl_pipe_new:252)
  179. [ 604.834] [I] GPU-id: 330 (kgsl_pipe_new:253)
  180. [ 604.834] [I] MMU enabled: 1 (kgsl_pipe_new:254)
  181. [ 604.835] [I] GMEM Base addr: 0x00000000 (kgsl_pipe_new:255)
  182. [ 604.835] [I] GMEM size: 0x00100000 (kgsl_pipe_new:256)
  183. [ 604.835] [I] Driver version: 3.14 (kgsl_pipe_new:258)
  184. [ 604.835] [I] Device version: 3.1 (kgsl_pipe_new:260)
  185. [ 604.835] (II) Loading sub module "exa"
  186. [ 604.836] (II) LoadModule: "exa"
  187. [ 604.839] (II) Loading /usr/lib/xorg/modules/libexa.so
  188. [ 604.839] (II) Module exa: vendor="X.Org Foundation"
  189. [ 604.839] compiled for 1.15.1, module version = 2.6.0
  190. [ 604.840] ABI class: X.Org Video Driver, version 15.0
  191. [ 604.840] (II) EXA(0): Driver allocated offscreen pixmaps
  192. [ 604.841] (II) EXA(0): Driver registered support for the following operations:
  193. [ 604.841] (II) Solid
  194. [ 604.841] (II) Copy
  195. [ 604.841] (II) Composite (RENDER acceleration)
  196. [ 604.842] (II) freedreno(0): [DRI2] Setup complete
  197. [ 604.842] (II) freedreno(0): [DRI2] DRI driver: kgsl
  198. [ 604.843] (II) freedreno(0): RandR 1.2 enabled, ignore the following RandR disabled message.
  199. [ 604.847] (--) RandR disabled
  200. [ 604.997] (II) SELinux: Disabled on system
  201. [ 605.074] [I] Pipe Info: (kgsl_pipe_new:245)
  202. [ 605.074] [I] Device: /dev/kgsl-3d0 (kgsl_pipe_new:246)
  203. [ 605.074] [I] Chip-id: 3.3.0.1 (kgsl_pipe_new:251)
  204. [ 605.074] [I] Device-id: 1 (kgsl_pipe_new:252)
  205. [ 605.075] [I] GPU-id: 330 (kgsl_pipe_new:253)
  206. [ 605.075] [I] MMU enabled: 1 (kgsl_pipe_new:254)
  207. [ 605.075] [I] GMEM Base addr: 0x00000000 (kgsl_pipe_new:255)
  208. [ 605.075] [I] GMEM size: 0x00100000 (kgsl_pipe_new:256)
  209. [ 605.075] [I] Driver version: 3.14 (kgsl_pipe_new:258)
  210. [ 605.076] [I] Device version: 3.1 (kgsl_pipe_new:260)
  211. [ 605.092] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
  212. [ 605.092] (II) AIGLX: enabled GLX_ARB_create_context
  213. [ 605.092] (II) AIGLX: enabled GLX_ARB_create_context_profile
  214. [ 605.092] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
  215. [ 605.093] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
  216. [ 605.093] (II) AIGLX: enabled GLX_ARB_fbconfig_float
  217. [ 605.093] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
  218. [ 605.096] (II) AIGLX: Loaded and initialized kgsl
  219. [ 605.096] (II) GLX: Initialized DRI2 GL provider for screen 0
  220. [ 605.103] (EE) freedreno(0): Unable to change the mode: Invalid argument
  221. [ 605.104] (II) freedreno(0): Setting screen physical size to 285 x 508
  222. [ 605.105] [E] mmap failed: Invalid argument (fd_bo_map:357)
  223. [ 605.106] (EE)
  224. [ 605.107] (EE) Backtrace:
  225. [ 605.108] (EE)
  226. [ 605.108] (EE) Segmentation fault at address 0x0
  227. [ 605.109] (EE)
  228. Fatal server error:
  229. [ 605.109] (EE) Caught signal 11 (Segmentation fault). Server aborting
  230. [ 605.110] (EE)
  231. [ 605.110] (EE)
  232. Please consult the The X.Org Foundation support
  233. at http://wiki.x.org
  234. for help.
  235. [ 605.111] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
  236. [ 605.111] (EE)
  237. [ 605.113] (II) AIGLX: Suspending AIGLX clients for VT switch
  238. [ 605.114] (EE) Server terminated with error (1). Closing log file.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!