API tools faq
paste
TDCroPower

Failed Start with verbository 7

TDCroPower
Sep 28th, 2023
117
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.30 KB | None | 0 0
raw download clone embed print report
  1. SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  2. MMC: mmc@fe320000: 1, sdhci@fe330000: 0
  3. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  4.  
  5. In: serial
  6. Out: serial
  7. Err: serial
  8. Model: Helios64
  9. Revision: 1.2 - 4GB non ECC
  10. Net: eth0: ethernet@fe300000
  11. scanning bus for devices...
  12. Hit any key to stop autoboot: 0
  13. Card did not respond to voltage select!
  14. switch to partitions #0, OK
  15. mmc0(part 0) is current device
  16. Scanning mmc 0:1...
  17. Found U-Boot script /boot/boot.scr
  18. 3185 bytes read in 18 ms (171.9 KiB/s)
  19. ## Executing script at 00500000
  20. Boot script loaded from mmc 0
  21. 166 bytes read in 15 ms (10.7 KiB/s)
  22. 16807894 bytes read in 1622 ms (9.9 MiB/s)
  23. 29792768 bytes read in 2856 ms (9.9 MiB/s)
  24. 86670 bytes read in 42 ms (2 MiB/s)
  25. 2698 bytes read in 34 ms (77.1 KiB/s)
  26. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  27. ## Executing script at 09000000
  28. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  29. Image Name: uInitrd
  30. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  31. Data Size: 16807830 Bytes = 16 MiB
  32. Load Address: 00000000
  33. Entry Point: 00000000
  34. Verifying Checksum ... OK
  35. ## Flattened Device Tree blob at 01f00000
  36. Booting using the fdt blob at 0x1f00000
  37. Loading Ramdisk to f4edf000, end f5ee6796 ... OK
  38. Loading Device Tree to 00000000f4e61000, end 00000000f4edefff ... OK
  39.  
  40. Starting kernel ...
  41.  
  42. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  43. [ 0.000000] Linux version 6.1.50-current-rockchip64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Wed Aug 30 14:11:13 UTC 2023
  44. [ 0.000000] Machine model: Helios64
  45. [ 0.000000] efi: UEFI not found.
  46. [ 0.000000] NUMA: No NUMA configuration found
  47. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
  48. [ 0.000000] NUMA: NODE_DATA [mem 0xf77c2a80-0xf77c4fff]
  49. [ 0.000000] Zone ranges:
  50. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
  51. [ 0.000000] DMA32 empty
  52. [ 0.000000] Normal empty
  53. [ 0.000000] Movable zone start for each node
  54. [ 0.000000] Early memory node ranges
  55. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  56. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  57. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  58. [ 0.000000] cma: Reserved 128 MiB at 0x00000000e9000000
  59. [ 0.000000] psci: probing for conduit method from DT.
  60. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  61. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  62. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  63. [ 0.000000] psci: SMC Calling Convention v1.0
  64. [ 0.000000] percpu: Embedded 30 pages/cpu s82408 r8192 d32280 u122880
  65. [ 0.000000] Detected VIPT I-cache on CPU0
  66. [ 0.000000] CPU features: detected: GIC system register CPU interface
  67. [ 0.000000] CPU features: detected: ARM erratum 845719
  68. [ 0.000000] alternatives: applying boot alternatives
  69. [ 0.000000] Fallback order for Node 0: 0
  70. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  71. [ 0.000000] Policy zone: DMA
  72. [ 0.000000] Kernel command line: root=UUID=8fd10f19-b84f-46c4-975b-a07f40a388ba rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=728863aa-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  73. [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
  74. [ 0.000000] Unknown kernel command line parameters "ubootpart=728863aa-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  75. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  76. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  77. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  78. [ 0.000000] Memory: 3805112K/4061184K available (16512K kernel code, 2278K rwdata, 6172K rodata, 3968K init, 585K bss, 125000K reserved, 131072K cma-reserved)
  79. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  80. [ 0.000000] trace event string verifier disabled
  81. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  82. [ 0.000000] rcu: RCU event tracing is enabled.
  83. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  84. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  85. [ 0.000000] Tracing variant of Tasks RCU enabled.
  86. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  87. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  88. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  89. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  90. [ 0.000000] GICv3: 256 SPIs implemented
  91. [ 0.000000] GICv3: 0 Extended SPIs implemented
  92. [ 0.000000] Root IRQ handler: gic_handle_irq
  93. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  94. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  95. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  96. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
  97. [ 0.000000] ITS: using cache flushing for cmd queue
  98. [ 0.000000] GICv3: using LPI property table @0x00000000004e0000
  99. [ 0.000000] GIC: using cache flushing for LPI property table
  100. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004f0000
  101. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  102. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  103. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  104. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  105. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  106. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  107. [ 0.001537] Console: colour dummy device 80x25
  108. [ 0.002545] printk: console [tty1] enabled
  109. [ 0.002672] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  110. [ 0.002718] pid_max: default: 32768 minimum: 301
  111. [ 0.002849] LSM: Security Framework initializing
  112. [ 0.002905] Yama: becoming mindful.
  113. [ 0.003074] AppArmor: AppArmor initialized
  114. [ 0.003134] Stack Depot allocating hash table of 262144 entries with kvcalloc
  115. [ 0.003885] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  116. [ 0.003943] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  117. [ 0.006134] cacheinfo: Unable to detect cache hierarchy for CPU 0
  118. [ 0.007596] cblist_init_generic: Setting adjustable number of callback queues.
  119. [ 0.007630] cblist_init_generic: Setting shift to 3 and lim to 1.
  120. [ 0.007825] cblist_init_generic: Setting adjustable number of callback queues.
  121. [ 0.007856] cblist_init_generic: Setting shift to 3 and lim to 1.
  122. [ 0.008294] rcu: Hierarchical SRCU implementation.
  123. [ 0.008319] rcu: Max phase no-delay instances is 1000.
  124. [ 0.010178] Platform MSI: interrupt-controller@fee20000 domain created
  125. [ 0.010798] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  126. [ 0.013162] EFI services will not be available.
  127. [ 0.014023] smp: Bringing up secondary CPUs ...
  128. [ 0.015232] Detected VIPT I-cache on CPU1
  129. [ 0.015387] cacheinfo: Unable to detect cache hierarchy for CPU 1
  130. [ 0.015409] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  131. [ 0.015434] GICv3: CPU1: using allocated LPI pending table @0x0000000000580000
  132. [ 0.015501] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  133. [ 0.016986] Detected VIPT I-cache on CPU2
  134. [ 0.017150] cacheinfo: Unable to detect cache hierarchy for CPU 2
  135. [ 0.017174] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  136. [ 0.017198] GICv3: CPU2: using allocated LPI pending table @0x0000000000590000
  137. [ 0.017262] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  138. [ 0.018713] Detected VIPT I-cache on CPU3
  139. [ 0.018882] cacheinfo: Unable to detect cache hierarchy for CPU 3
  140. [ 0.018908] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  141. [ 0.018932] GICv3: CPU3: using allocated LPI pending table @0x00000000005a0000
  142. [ 0.018996] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  143. [ 0.020501] CPU features: detected: Spectre-v2
  144. [ 0.020514] CPU features: detected: Spectre-v4
  145. [ 0.020520] CPU features: detected: Spectre-BHB
  146. [ 0.020528] CPU features: detected: ARM erratum 1742098
  147. [ 0.020536] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  148. [ 0.020542] Detected PIPT I-cache on CPU4
  149. [ 0.020650] cacheinfo: Unable to detect cache hierarchy for CPU 4
  150. [ 0.020666] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  151. [ 0.020685] GICv3: CPU4: using allocated LPI pending table @0x00000000005b0000
  152. [ 0.020728] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  153. [ 0.022123] Detected PIPT I-cache on CPU5
  154. [ 0.022240] cacheinfo: Unable to detect cache hierarchy for CPU 5
  155. [ 0.022258] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  156. [ 0.022276] GICv3: CPU5: using allocated LPI pending table @0x00000000005c0000
  157. [ 0.022321] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  158. [ 0.022498] smp: Brought up 1 node, 6 CPUs
  159. [ 0.022978] SMP: Total of 6
  160. [ 2.275939] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  161. [ 2.279012] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  162. [ 2.288537] dw_wdt ff848000.watchdog: No valid TOPs array specified
  163. [ 2.291341] sdhci: Secure Digital Host Controller Interface driver
  164. [ 2.291903] sdhci: Copyright(c) Pierre Ossman
  165. [ 2.292325] Synopsys Designware Multimedia Card Interface Driver
  166. [ 2.294266] sdhci-pltfm: SDHCI platform and OF driver helper
  167. [ 2.299779] ledtrig-cpu: registered to indicate activity on CPUs
  168. [ 2.301376] hid: raw HID events driver (C) Jiri Kosina
  169. [ 2.301965] usbcore: registered new interface driver usbhid
  170. [ 2.302469] usbhid: USB HID core driver
  171. [ 2.307853] drop_monitor: Initializing network drop monitor service
  172. [ 2.309250] NET: Registered PF_INET6 protocol family
  173. [ 2.340585] Segment Routing with IPv6
  174. [ 2.340983] In-situ OAM (IOAM) with IPv6
  175. [ 2.341434] NET: Registered PF_PACKET protocol family
  176. [ 2.342064] 8021q: 802.1Q VLAN Support v1.8
  177. [ 2.342504] Key type dns_resolver registered
  178. [ 2.344360] registered taskstats version 1
  179. [ 2.344799] Loading compiled-in X.509 certificates
  180. [ 2.351117] zswap: loaded using pool zstd/z3fold
  181. [ 2.352244] Key type .fscrypt registered
  182. [ 2.352631] Key type fscrypt-provisioning registered
  183. [ 2.355450] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  184. [ 2.356507] Key type encrypted registered
  185. [ 2.356896] AppArmor: AppArmor sha1 policy hashing enabled
  186. [ 2.453571] pca953x 2-0020: using no AI
  187. [ 2.455454] ehci-platform fe380000.usb: EHCI Host Controller
  188. [ 2.455490] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  189. [ 2.455990] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  190. [ 2.456040] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
  191. [ 2.456782] ehci-platform fe380000.usb: irq 58, io mem 0xfe380000
  192. [ 2.457424] rk808 0-001b: chip id: 0x0
  193. [ 2.457617] ohci-platform fe3a0000.usb: irq 60, io mem 0xfe3a0000
  194. [ 2.464199] rk808-regulator rk808-regulator: there is no dvs0 gpio
  195. [ 2.464823] rk808-regulator rk808-regulator: there is no dvs1 gpio
  196. [ 2.465385] rk808-regulator rk808-regulator: max buck steps per change: 4
  197. [ 2.471389] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
  198. [ 2.472448] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  199. [ 2.473275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  200. [ 2.474023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  201. [ 2.474672] usb usb1: Product: EHCI Host Controller
  202. [ 2.475115] usb usb1: Manufacturer: Linux 6.1.50-current-rockchip64 ehci_hcd
  203. [ 2.475745] usb usb1: SerialNumber: fe380000.usb
  204. [ 2.476896] hub 1-0:1.0: USB hub found
  205. [ 2.477279] hub 1-0:1.0: 1 port detected
  206. [ 2.480810] rk808-rtc rk808-rtc: registered as rtc0
  207. [ 2.481819] rk808-rtc rk808-rtc: setting system clock to 2023-09-29T00:02:49 UTC (1695945769)
  208. [ 2.485090] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  209. [ 2.485764] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  210. [ 2.486366] dwmmc_rockchip fe320000.mmc: Version ID is 270a
  211. [ 2.486927] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo
  212. [ 2.488196] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  213. [ 2.488464] dwmmc_rockchip fe320000.mmc: Got CD GPIO
  214. [ 2.488900] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
  215. [ 2.490051] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
  216. [ 2.491446] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms
  217. [ 2.501144] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  218. [ 2.520767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  219. [ 2.521542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  220. [ 2.522206] usb usb2: Product: Generic Platform OHCI controller
  221. [ 2.522750] usb usb2: Manufacturer: Linux 6.1.50-current-rockchip64 ohci_hcd
  222. [ 2.523393] usb usb2: SerialNumber: fe3a0000.usb
  223. [ 2.524685] hub 2-0:1.0: USB hub found
  224. [ 2.525091] hub 2-0:1.0: 1 port detected
  225. [ 2.549533] rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan
  226. [ 2.550704] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  227. [ 2.551305] pci_bus 0000:00: root bus resource [bus 00-1f]
  228. [ 2.551805] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  229. [ 2.552447] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  230. [ 2.553347] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  231. [ 2.554038] pci 0000:00:00.0: supports D1
  232. [ 2.554406] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  233. [ 2.560644] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  234. [ 2.561589] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
  235. [ 2.562199] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  236. [ 2.562834] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
  237. [ 2.563352] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
  238. [ 2.563984] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
  239. [ 2.564517] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  240. [ 2.565151] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
  241. [ 2.565665] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
  242. [ 2.566296] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
  243. [ 2.566811] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
  244. [ 2.567442] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
  245. [ 2.567958] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
  246. [ 2.568571] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  247. [ 2.569206] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  248. [ 2.570184] pci 0000:01:00.0: PME# supported from D3hot
  249. [ 2.570906] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
  250. [ 2.572724] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  251. [ 2.573348] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  252. [ 2.573982] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  253. [ 2.574635] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
  254. [ 2.575256] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
  255. [ 2.575821] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
  256. [ 2.576431] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
  257. [ 2.576996] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
  258. [ 2.577590] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
  259. [ 2.578152] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
  260. [ 2.578744] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
  261. [ 2.579307] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
  262. [ 2.579899] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
  263. [ 2.580475] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
  264. [ 2.581074] pci 0000:00:00.0: PCI bridge to [bus 01]
  265. [ 2.581529] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  266. [ 2.582367] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  267. [ 2.583225] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
  268. [ 2.584174] pcieport 0000:00:00.0: AER: enabled with IRQ 78
  269. [ 2.585065] ahci 0000:01:00.0: enabling device (0000 -> 0002)
  270. [ 2.586211] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
  271. [ 2.586900] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
  272. [ 2.587641] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
  273. [ 2.593798] scsi host0: ahci
  274. [ 2.594842] scsi host1: ahci
  275. [ 2.595774] scsi host2: ahci
  276. [ 2.596693] scsi host3: ahci
  277. [ 2.597614] scsi host4: ahci
  278. [ 2.598097] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 79
  279. [ 2.598768] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 80
  280. [ 2.599431] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 81
  281. [ 2.600095] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 82
  282. [ 2.600783] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 83
  283. [ 2.606421] mmc1: CQHCI version 5.10
  284. [ 2.606556] WCN: marlin_init entry!
  285. [ 2.608592] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  286. [ 2.609914] of_cfs_init
  287. [ 2.610185] of_cfs_init: OK
  288. [ 2.632721] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
  289. [ 2.697694] mmc1: Command Queue Engine enabled
  290. [ 2.698116] mmc1: new HS200 MMC card at address 0001
  291. [ 2.699411] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
  292. [ 2.701791] mmcblk1: p1
  293. [ 2.702671] mmcblk1boot0: mmc1:0001 AJTD4R 4.00 MiB
  294. [ 2.704861] mmcblk1boot1: mmc1:0001 AJTD4R 4.00 MiB
  295. [ 2.706881] mmcblk1rpmb: mmc1:0001 AJTD4R 4.00 MiB, chardev (242:0)
  296. [ 3.076464] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  297. [ 3.077258] ata1.00: ATA-11: NT-128, SN08979, max UDMA/133
  298. [ 3.077832] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
  299. [ 3.078901] ata1.00: configured for UDMA/133
  300. [ 3.079858] scsi 0:0:0:0: Direct-Access ATA NT-128 979 PQ: 0 ANSI: 5
  301. [ 3.082767] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
  302. [ 3.083531] sd 0:0:0:0: [sda] Write Protect is off
  303. [ 3.084116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  304. [ 3.085134] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  305. [ 3.089044] sda: sda1
  306. [ 3.089731] sd 0:0:0:0: [sda] Attached SCSI disk
  307. [ 4.752459] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  308. [ 4.753524] ata2.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
  309. [ 4.754442] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
  310. [ 4.755688] ata2.00: configured for UDMA/133
  311. [ 4.756611] scsi 1:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
  312. [ 4.759402] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
  313. [ 4.760125] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  314. [ 4.760721] sd 1:0:0:0: [sdb] Write Protect is off
  315. [ 4.761311] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  316. [ 4.762310] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
  317. [ 4.786932] sd 1:0:0:0: [sdb] Attached SCSI disk
  318. [ 5.232462] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  319. [ 5.233529] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
  320. [ 5.234464] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
  321. [ 5.235769] ata3.00: configured for UDMA/133
  322. [ 5.236690] scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
  323. [ 5.239256] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
  324. [ 5.239959] sd 2:0:0:0: [sdc] 4096-byte physical blocks
  325. [ 5.240514] sd 2:0:0:0: [sdc] Write Protect is off
  326. [ 5.241052] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  327. [ 5.241983] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
  328. [ 5.267151] sd 2:0:0:0: [sdc] Attached SCSI disk
  329. [ 5.551084] ata4: SATA link down (SStatus 0 SControl 300)
  330. [ 6.028468] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  331. [ 6.029601] ata5.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
  332. [ 6.030868] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  333. [ 6.032799] ata5.00: configured for UDMA/133
  334. [ 6.033801] scsi 4:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5
  335. [ 6.036947] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
  336. [ 6.037670] sd 4:0:0:0: [sdd] 4096-byte physical blocks
  337. [ 6.038247] sd 4:0:0:0: [sdd] Write Protect is off
  338. [ 6.038878] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  339. [ 6.039882] sd 4:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
  340. [ 6.056439] sd 4:0:0:0: [sdd] Attached SCSI disk
  341. [ 6.059864] Freeing unused kernel memory: 3968K
  342. [ 6.060576] Run /init as init process
  343. [ 6.709428] input: adc-keys as /devices/platform/adc-keys/input/input1
  344. [ 6.896488] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  345. [ 6.897141] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  346. [ 6.899218] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  347. [ 6.924877] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  348. [ 6.925537] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  349. [ 6.926053] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  350. [ 6.926578] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  351. [ 6.927221] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  352. [ 6.932793] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  353. [ 6.991632] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  354. [ 6.992308] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  355. [ 6.992872] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  356. [ 6.993550] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  357. [ 6.994227] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  358. [ 6.994702] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  359. [ 6.995332] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  360. [ 7.015432] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  361. [ 7.016011] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  362. [ 7.016645] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  363. [ 7.241593] async_tx: api initialized (async)
  364. [ 7.250286] md/raid:md0: not clean -- starting background reconstruction
  365. [ 7.251015] md/raid:md0: device sdd operational as raid disk 2
  366. [ 7.251547] md/raid:md0: device sdb operational as raid disk 0
  367. [ 7.252073] md/raid:md0: device sdc operational as raid disk 1
  368. [ 7.255903] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
  369. [ 7.300786] md0: detected capacity change from 0 to 15627544576
  370. [ 7.354972] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  371. [ 7.355922] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  372. [ 8.010773] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
  373. [ 9.030471] systemd[1]: Inserted module 'autofs4'
  374. [ 9.098556] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
  375. [ 9.101732] systemd[1]: Detected architecture arm64.
  376. [ 9.122212] systemd[1]: Set hostname to <helios64>.
  377. [ 9.176327] systemd[1]: Using hardware watchdog 'Synopsys DesignWare Watchdog', version 0, device /dev/watchdog
  378. [ 9.177323] systemd[1]: Set hardware watchdog to 21s.
  379. [ 9.302719] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
  380. [ 10.564426] random: crng init done
  381. [ 11.152444] systemd[1]: Queued start job for default target Graphical Interface.
  382. [ 11.177341] systemd[1]: Created slice system-getty.slice.
  383. [ 11.180877] systemd[1]: Created slice system-modprobe.slice.
  384. [ 11.184025] systemd[1]: Created slice system-serial\x2dgetty.slice.
  385. [ 11.187402] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  386. [ 11.190401] systemd[1]: Created slice User and Session Slice.
  387. [ 11.191294] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
  388. [ 11.192977] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  389. [ 11.194954] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  390. [ 11.196267] systemd[1]: Reached target Local Encrypted Volumes.
  391. [ 11.197411] systemd[1]: Reached target Slices.
  392. [ 11.198131] systemd[1]: Reached target Swap.
  393. [ 11.198780] systemd[1]: Reached target System Time Set.
  394. [ 11.199908] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  395. [ 11.201588] systemd[1]: Listening on LVM2 poll daemon socket.
  396. [ 11.247141] systemd[1]: Listening on RPCbind Server Activation Socket.
  397. [ 11.249008] systemd[1]: Listening on Syslog Socket.
  398. [ 11.250376] systemd[1]: Listening on fsck to fsckd communication Socket.
  399. [ 11.251594] systemd[1]: Listening on initctl Compatibility Named Pipe.
  400. [ 11.253394] systemd[1]: Listening on Journal Audit Socket.
  401. [ 11.254766] systemd[1]: Listening on Journal Socket (/dev/log).
  402. [ 11.256348] systemd[1]: Listening on Journal Socket.
  403. [ 11.257998] systemd[1]: Listening on Network Service Netlink Socket.
  404. [ 11.259646] systemd[1]: Listening on udev Control Socket.
  405. [ 11.260978] systemd[1]: Listening on udev Kernel Socket.
  406. [ 11.267777] systemd[1]: Mounting Huge Pages File System...
  407. [ 11.275522] systemd[1]: Mounting POSIX Message Queue File System...
  408. [ 11.282768] systemd[1]: Mounting NFSD configuration filesystem...
  409. [ 11.290546] systemd[1]: Mounting RPC Pipe File System...
  410. [ 11.297946] systemd[1]: Mounting Kernel Debug File System...
  411. [ 11.305375] systemd[1]: Mounting Kernel Trace File System...
  412. [ 11.307064] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  413. [ 11.308588] systemd[1]: Finished Availability of block devices.
  414. [ 11.317756] systemd[1]: Starting Set the console keyboard layout...
  415. [ 11.326176] systemd[1]: Starting Create list of static device nodes for the current kernel...
  416. [ 11.334466] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  417. [ 11.341835] systemd[1]: Starting Load Kernel Module configfs...
  418. [ 11.348466] systemd[1]: Starting Load Kernel Module drm...
  419. [ 11.355119] systemd[1]: Starting Load Kernel Module fuse...
  420. [ 11.358585] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
  421. [ 11.363776] RPC: Registered named UNIX socket transport module.
  422. [ 11.364331] RPC: Registered udp transport module.
  423. [ 11.364786] RPC: Registered tcp transport module.
  424. [ 11.365213] RPC: Registered tcp NFSv4.1 backchannel transport module.
  425. [ 11.370832] systemd[1]: Started Nameserver information manager.
  426. [ 11.373063] systemd[1]: Reached target Network (Pre).
  427. [ 11.388329] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  428. [ 11.389598] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  429. [ 11.402505] systemd[1]: Starting Journal Service...
  430. [ 11.420379] systemd[1]: Starting Load Kernel Modules...
  431. [ 11.431814] systemd[1]: Starting Remount Root and Kernel File Systems...
  432. [ 11.443742] systemd[1]: Starting Coldplug All udev Devices...
  433. [ 11.461530] systemd[1]: Mounted Huge Pages File System.
  434. [ 11.462918] systemd[1]: Mounted POSIX Message Queue File System.
  435. [ 11.464338] systemd[1]: Mounted NFSD configuration filesystem.
  436. [ 11.465738] systemd[1]: Mounted RPC Pipe File System.
  437. [ 11.467010] systemd[1]: Mounted Kernel Debug File System.
  438. [ 11.468280] systemd[1]: Mounted Kernel Trace File System.
  439. [ 11.471699] systemd[1]: Finished Create list of static device nodes for the current kernel.
  440. [ 11.474729] systemd[1]: modprobe@configfs.service: Succeeded.
  441. [ 11.477220] systemd[1]: Finished Load Kernel Module configfs.
  442. [ 11.479857] systemd[1]: modprobe@drm.service: Succeeded.
  443. [ 11.482199] systemd[1]: Finished Load Kernel Module drm.
  444. [ 11.485227] systemd[1]: modprobe@fuse.service: Succeeded.
  445. [ 11.487541] systemd[1]: Finished Load Kernel Module fuse.
  446. [ 11.511237] lm75 2-004c: supply vs not found, using dummy regulator
  447. [ 11.513193] hwmon hwmon2: temp1_input not attached to any thermal zone
  448. [ 11.513828] lm75 2-004c: hwmon2: sensor 'lm75'
  449. [ 11.517290] EXT4-fs (sda1): re-mounted. Quota mode: none.
  450. [ 11.521651] systemd[1]: Mounting FUSE Control File System...
  451. [ 11.532121] systemd[1]: Mounting Kernel Configuration File System...
  452. [ 11.543452] systemd[1]: Starting pNFS block layout mapping daemon...
  453. [ 11.556445] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
  454. [ 11.557343] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
  455. [ 11.558169] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
  456. [ 11.563928] systemd[1]: Finished Remount Root and Kernel File Systems.
  457. [ 11.569653] systemd[1]: Finished Load Kernel Modules.
  458. [ 11.571802] systemd[1]: Mounted FUSE Control File System.
  459. [ 11.574023] systemd[1]: Mounted Kernel Configuration File System.
  460. [ 11.589350] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  461. [ 11.590569] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  462. [ 11.625302] systemd[1]: Starting Load/Save Random Seed...
  463. [ 11.632718] systemd[1]: Starting Apply Kernel Variables...
  464. [ 11.640951] systemd[1]: Starting Create System Users...
  465. [ 11.643946] systemd[1]: Started pNFS block layout mapping daemon.
  466. [ 11.700006] systemd[1]: Finished Load/Save Random Seed.
  467. [ 11.702047] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  468. [ 11.708134] systemd[1]: Finished Apply Kernel Variables.
  469. [ 11.754627] systemd[1]: Finished Create System Users.
  470. [ 11.806028] systemd[1]: Starting Create Static Device Nodes in /dev...
  471. [ 11.813072] systemd[1]: Finished Set the console keyboard layout.
  472. [ 11.898279] systemd[1]: Finished Create Static Device Nodes in /dev.
  473. [ 11.900613] systemd[1]: Started Journal Service.
  474. [ 12.005782] systemd-journald[431]: Received client request to flush runtime journal.
  475. [ 12.032328] systemd-journald[431]: File /var/log/journal/4d4f6d7f9df948e6afd380c743b4ba53/system.journal corrupted or uncleanly shut down, renaming and replacing.
  476. [ 12.743061] input: beeper as /devices/platform/beeper/input/input2
  477. [ 12.744148] mc: Linux media interface: v0.10
  478. [ 12.777415] videodev: Linux video capture interface: v2.00
  479. [ 12.800047] panfrost ff9a0000.gpu: clock rate = 500000000
  480. [ 12.800772] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
  481. [ 12.812677] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
  482. [ 12.813376] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400
  483. [ 12.814096] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
  484. [ 12.815134] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
  485. [ 12.830119] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
  486. [ 12.839372] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 0
  487. [ 12.844666] hantro-vpu ff650000.video-codec: Adding to iommu group 0
  488. [ 12.851163] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video0
  489. [ 12.858858] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video1
  490. [ 12.859591] rkvdec ff660000.video-codec: Adding to iommu group 1
  491. [ 12.871555] rockchip-rga ff680000.rga: HW Version: 0x03.02
  492. [ 12.881321] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video3
  493. [ 12.882971] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
  494. [ 12.883882] [drm] unsupported AFBC format[3231564e]
  495. [ 12.885603] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
  496. [ 12.886966] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
  497. [ 12.889757] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  498. [ 12.931896] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  499. [ 12.935556] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
  500. [ 12.936344] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
  501. [ 13.028517] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
  502. [ 13.036469] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  503. [ 13.037194] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  504. [ 13.039643] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  505. [ 13.041811] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  506. [ 13.042741] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  507. [ 13.043631] xhci-hcd xhci-hcd.2.auto: irq 101, io mem 0xfe800000
  508. [ 13.043863] sd 0:0:0:0: Attached scsi generic sg0 type 0
  509. [ 13.044502] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  510. [ 13.045176] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
  511. [ 13.045886] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
  512. [ 13.046719] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  513. [ 13.047483] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  514. [ 13.048138] usb usb3: Product: xHCI Host Controller
  515. [ 13.048628] usb usb3: Manufacturer: Linux 6.1.50-current-rockchip64 xhci-hcd
  516. [ 13.049274] usb usb3: SerialNumber: xhci-hcd.2.auto
  517. [ 13.059339] sd 1:0:0:0: Attached scsi generic sg1 type 0
  518. [ 13.063512] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  519. [ 13.073335] sd 2:0:0:0: Attached scsi generic sg2 type 0
  520. [ 13.079523] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
  521. [ 13.082661] hub 3-0:1.0: USB hub found
  522. [ 13.083109] hub 3-0:1.0: 1 port detected
  523. [ 13.084267] sd 4:0:0:0: Attached scsi generic sg3 type 0
  524. [ 13.148732] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  525. [ 13.149723] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
  526. [ 13.150503] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  527. [ 13.151157] usb usb4: Product: xHCI Host Controller
  528. [ 13.151600] usb usb4: Manufacturer: Linux 6.1.50-current-rockchip64 xhci-hcd
  529. [ 13.152229] usb usb4: SerialNumber: xhci-hcd.2.auto
  530. [ 13.172644] hub 4-0:1.0: USB hub found
  531. [ 13.173119] hub 4-0:1.0: 1 port detected
  532. [ 13.380027] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  533. [ 13.418673] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none.
  534. [ 13.686583] md: resync of RAID array md0
  535. [ 14.347411] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  536. [ 14.643640] Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP
  537. [ 14.644409] Modules linked in: snd_soc_hdmi_codec sg snd_soc_rockchip_i2s leds_pwm snd_soc_core snd_compress snd_pcm_dmaengine rockchip_rga hantro_vpu rockchip_vdec(C) v4l2_vp9 videobuf2_dma_contig v4l2_h264 snd_pcm videobuf2_dma_sg v4l2_mem2mem videobuf2_memops snd_timer videobuf2_v4l2 pwm_fan fusb302 videobuf2_common panfrost gpio_charger tcpm videodev gpu_sched snd typec mc drm_shmem_helper soundcore rockchip_rng rng_core gpio_beeper cpufreq_dt softdog lm75 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear realtek raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx dwmac_rk md_mod stmmac_platform stmmac pcs_xpcs adc_keys
  538. [ 14.649962] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G C 6.1.50-current-rockchip64 #3
  539. [ 14.650763] Hardware name: Helios64 (DT)
  540. [ 14.651114] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  541. [ 14.651732] pc : __this_cpu_preempt_check+0x14/0x40
  542. [ 14.652183] lr : ct_nmi_exit+0x80/0x280
  543. [ 14.652532] sp : ffff800009ef3bd0
  544. [ 14.652828] x29: ffff800009ef3bd0 x28: ffff000000762d00 x27: 0000000000000000
  545. [ 14.653468] x26: ffff000000762d00 x25: 0000000000000000 x24: 0000000000000000
  546. [ 14.654106] x23: ffff0000f779e8f0 x22: ffff800009a3dc70 x21: ff8000094c500000
  547. [ 14.654742] x20: ffff800009766900 x19: ffff8000097668f0 x18: 0000000000000000
  548. [ 14.655371] x17: ffff8000ee038000 x16: ffff800009d20000 x15: 0000000000000000
  549. [ 14.656002] x14: 0000000000000003 x13: 00000000000002bb x12: 0000000000a75e30
  550. [ 14.656631] x11: 0000000000000000 x10: 00000000000002bb x9 : ffff0000f77a1f80
  551. [ 14.657261] x8 : 0000000000000000 x7 : ffff0000f77a1f00 x6 : 000000000000027a
  552. [ 14.657891] x5 : ffff80000959a7e0 x4 : 0000000000000001 x3 : ffff800009757008
  553. [ 14.658520] x2 : ffff8000094c5000 x1 : ffff8000097668f0 x0 : ffff8000094ea818
  554. [ 14.659150] Call trace:
  555. [ 14.659368] __this_cpu_preempt_check+0x14/0x40
  556. [ 14.659772] ct_nmi_exit+0x80/0x280
  557. [ 14.660084] ct_irq_exit+0x10/0x80
  558. [ 14.660389] exit_to_kernel_mode.isra.0+0x20/0x2c
  559. [ 14.660807] el1_interrupt+0x58/0x6c
  560. [ 14.661126] el1h_64_irq_handler+0x18/0x2c
  561. [ 14.661490] el1h_64_irq+0x64/0x68
  562. [ 14.661794] arch_cpu_idle+0x18/0x2c
  563. [ 14.662113] default_idle_call+0x38/0x17c
  564. [ 14.662470] do_idle+0x23c/0x2b0
  565. [ 14.662761] cpu_startup_entry+0x28/0x30
  566. [ 14.663112] secondary_start_kernel+0x124/0x150
  567. [ 14.663515] __secondary_switched+0xb0/0xb4
  568. [ 14.663892] Code: a9bf7bfd d00025a2 910003fd aa0003e1 (9115e040)
  569. [ 14.664431] ---[ end trace 0000000000000000 ]---
  570. [ 14.664839] Kernel panic - not syncing: Attempted to kill the idle task!
  571. [ 14.665427] SMP: stopping secondary CPUs
  572. [ 14.665777] Kernel Offset: disabled
  573. [ 14.666085] CPU features: 0x40000,20834084,0000421b
  574. [ 14.666516] Memory Limit: none
  575. [ 14.666793] Rebooting in 90 seconds..
  576.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!