Public Pastes
daily pastebin goal
9%
SHARE
TWEET

Untitled

a guest Feb 10th, 2010 99 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] BIOS EBDA/lowmem at: 00098400/00098400
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
  5. [    0.000000] KERNEL supported cpus:
  6. [    0.000000]   Intel GenuineIntel
  7. [    0.000000]   AMD AuthenticAMD
  8. [    0.000000]   NSC Geode by NSC
  9. [    0.000000]   Cyrix CyrixInstead
  10. [    0.000000]   Centaur CentaurHauls
  11. [    0.000000]   Transmeta GenuineTMx86
  12. [    0.000000]   Transmeta TransmetaCPU
  13. [    0.000000]   UMC UMC UMC UMC
  14. [    0.000000] BIOS-provided physical RAM map:
  15. [    0.000000]  BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
  16. [    0.000000]  BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  18. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfedf800 (usable)
  19. [    0.000000]  BIOS-e820: 00000000bfedf800 - 00000000bfee0000 (reserved)
  20. [    0.000000]  BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
  21. [    0.000000]  BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
  22. [    0.000000]  BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
  23. [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
  24. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  25. [    0.000000] DMI present.
  26. [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
  27. [    0.000000] last_pfn = 0xbfedf max_arch_pfn = 0x100000
  28. [    0.000000] Scanning 0 areas for low memory corruption
  29. [    0.000000] modified physical RAM map:
  30. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  31. [    0.000000]  modified: 0000000000010000 - 0000000000098400 (usable)
  32. [    0.000000]  modified: 0000000000098400 - 00000000000a0000 (reserved)
  33. [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
  34. [    0.000000]  modified: 0000000000100000 - 00000000bfedf800 (usable)
  35. [    0.000000]  modified: 00000000bfedf800 - 00000000bfee0000 (reserved)
  36. [    0.000000]  modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
  37. [    0.000000]  modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
  38. [    0.000000]  modified: 00000000bfef0000 - 00000000bff00000 (reserved)
  39. [    0.000000]  modified: 00000000f0000000 - 00000000f4000000 (reserved)
  40. [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
  41. [    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
  42. [    0.000000] RAMDISK: 7f89c000 - 7ffff993
  43. [    0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
  44. [    0.000000] Move RAMDISK from 000000007f89c000 - 000000007ffff992 to 00881000 - 00fe4992
  45. [    0.000000] ACPI: RSDP 000F83E0, 0024 (r2 HPQOEM)
  46. [    0.000000] ACPI: XSDT BFEE30C0, 0054 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  47. [    0.000000] ACPI: FACP BFEE7900, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  48. [    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
  49. [    0.000000] ACPI: DSDT BFEE3280, 463B (r1 HPQOEM SLIC-CPC     1000 MSFT  3000000)
  50. [    0.000000] ACPI: FACS BFEE0000, 0040
  51. [    0.000000] ACPI: SLIC BFEE7B40, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  52. [    0.000000] ACPI: HPET BFEE7D00, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD       98)
  53. [    0.000000] ACPI: MCFG BFEE7D80, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  54. [    0.000000] ACPI: APIC BFEE7A40, 0084 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  55. [    0.000000] ACPI: SSDT BFEE82E0, 0304 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  56. [    0.000000] ACPI: Local APIC address 0xfee00000
  57. [    0.000000] 2186MB HIGHMEM available.
  58. [    0.000000] 883MB LOWMEM available.
  59. [    0.000000]   mapped low ram: 0 - 373fe000
  60. [    0.000000]   low ram: 00000000 - 373fe000
  61. [    0.000000]   bootmap 00012000 - 00018e80
  62. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
  63. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  64. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  65. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  66. [    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
  67. [    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
  68. [    0.000000]   #5 [0000098400 - 0000100000]    BIOS reserved ==> [0000098400 - 0000100000]
  69. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  70. [    0.000000]   #7 [0000881000 - 0000fe4993]      NEW RAMDISK ==> [0000881000 - 0000fe4993]
  71. [    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
  72. [    0.000000] found SMP MP-table at [c00f5f40] 000f5f40
  73. [    0.000000] Zone PFN ranges:
  74. [    0.000000]   DMA      0x00000010 -> 0x00001000
  75. [    0.000000]   Normal   0x00001000 -> 0x000373fe
  76. [    0.000000]   HighMem  0x000373fe -> 0x000bfedf
  77. [    0.000000] Movable zone start PFN for each node
  78. [    0.000000] early_node_map[2] active PFN ranges
  79. [    0.000000]     0: 0x00000010 -> 0x00000098
  80. [    0.000000]     0: 0x00000100 -> 0x000bfedf
  81. [    0.000000] On node 0 totalpages: 786023
  82. [    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
  83. [    0.000000]   DMA zone: 32 pages used for memmap
  84. [    0.000000]   DMA zone: 0 pages reserved
  85. [    0.000000]   DMA zone: 3944 pages, LIFO batch:0
  86. [    0.000000]   Normal zone: 1736 pages used for memmap
  87. [    0.000000]   Normal zone: 220470 pages, LIFO batch:31
  88. [    0.000000]   HighMem zone: 4374 pages used for memmap
  89. [    0.000000]   HighMem zone: 555467 pages, LIFO batch:31
  90. [    0.000000]   Movable zone: 0 pages used for memmap
  91. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  92. [    0.000000] ACPI: Local APIC address 0xfee00000
  93. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  94. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  95. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
  96. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
  97. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  98. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  99. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  100. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  101. [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  102. [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  103. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  104. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  105. [    0.000000] ACPI: IRQ0 used by override.
  106. [    0.000000] ACPI: IRQ2 used by override.
  107. [    0.000000] ACPI: IRQ9 used by override.
  108. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  109. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  110. [    0.000000] Using ACPI (MADT) for SMP configuration information
  111. [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
  112. [    0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000
  113. [    0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
  114. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  115. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  116. [    0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:30100000)
  117. [    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
  118. [    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
  119. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 779881
  120. [    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
  121. [    0.000000] Enabling fast FPU save and restore... done.
  122. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  123. [    0.000000] Initializing CPU#0
  124. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  125. [    0.000000] Fast TSC calibration using PIT
  126. [    0.000000] Detected 2400.445 MHz processor.
  127. [    0.004000] Console: colour VGA+ 80x25
  128. [    0.004000] console [tty0] enabled
  129. [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  130. [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  131. [    0.004000] allocated 15722540 bytes of page_cgroup
  132. [    0.004000] please try cgroup_disable=memory option if you don't want
  133. [    0.004000] Scanning for low memory corruption every 60 seconds
  134. [    0.004000] Memory: 3086936k/3144572k available (4126k kernel code, 56244k reserved, 2208k data, 532k init, 2239364k highmem)
  135. [    0.004000] virtual kernel memory layout:
  136. [    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
  137. [    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
  138. [    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
  139. [    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
  140. [    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
  141. [    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
  142. [    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
  143. [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  144. [    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  145. [    0.004000] hpet clockevent registered
  146. [    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  147. [    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.89 BogoMIPS (lpj=9601780)
  148. [    0.004000] Security Framework initialized
  149. [    0.004000] SELinux:  Disabled at boot.
  150. [    0.004000] AppArmor: AppArmor initialized
  151. [    0.004000] Mount-cache hash table entries: 512
  152. [    0.004000] Initializing cgroup subsys ns
  153. [    0.004000] Initializing cgroup subsys cpuacct
  154. [    0.004000] Initializing cgroup subsys memory
  155. [    0.004000] Initializing cgroup subsys freezer
  156. [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
  157. [    0.004000] CPU: L2 cache: 4096K
  158. [    0.004000] CPU: Physical Processor ID: 0
  159. [    0.004000] CPU: Processor Core ID: 0
  160. [    0.004000] using mwait in idle threads.
  161. [    0.004000] Checking 'hlt' instruction... OK.
  162. [    0.018080] ACPI: Core revision 20080926
  163. [    0.019540] ACPI: Checking initramfs for custom DSDT
  164. [    0.272406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  165. [    0.314972] CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
  166. [    0.316001] Booting processor 1 APIC 0x1 ip 0x6000
  167. [    0.004000] Initializing CPU#1
  168. [    0.004000] Calibrating delay using timer specific routine.. 4801.31 BogoMIPS (lpj=9602639)
  169. [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
  170. [    0.004000] CPU: L2 cache: 4096K
  171. [    0.004000] CPU: Physical Processor ID: 0
  172. [    0.004000] CPU: Processor Core ID: 1
  173. [    0.400553] CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
  174. [    0.400566] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  175. [    0.404040] Brought up 2 CPUs
  176. [    0.404043] Total of 2 processors activated (9602.20 BogoMIPS).
  177. [    0.404089] CPU0 attaching sched-domain:
  178. [    0.404091]  domain 0: span 0-1 level MC
  179. [    0.404093]   groups: 0 1
  180. [    0.404098] CPU1 attaching sched-domain:
  181. [    0.404100]  domain 0: span 0-1 level MC
  182. [    0.404102]   groups: 1 0
  183. [    0.404166] net_namespace: 776 bytes
  184. [    0.404166] Booting paravirtualized kernel on bare hardware
  185. [    0.404281] Time:  0:54:48  Date: 02/11/10
  186. [    0.404281] regulator: core version 0.5
  187. [    0.404281] NET: Registered protocol family 16
  188. [    0.404281] EISA bus registered
  189. [    0.404281] ACPI: bus type pci registered
  190. [    0.404281] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
  191. [    0.428872] PCI: PCI BIOS revision 3.00 entry at 0xf1f00, last bus=2
  192. [    0.428873] PCI: Using configuration type 1 for base access
  193. [    0.429611] ACPI: EC: Look up EC in DSDT
  194. [    0.435758] ACPI: Interpreter enabled
  195. [    0.435765] ACPI: (supports S0 S1 S3 S4 S5)
  196. [    0.435787] ACPI: Using IOAPIC for interrupt routing
  197. [    0.439103] ACPI: No dock devices found.
  198. [    0.439112] ACPI: PCI Root Bridge [PCI0] (0000:00)
  199. [    0.439187] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  200. [    0.439190] pci 0000:00:01.0: PME# disabled
  201. [    0.439245] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
  202. [    0.439271] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  203. [    0.439274] pci 0000:00:1b.0: PME# disabled
  204. [    0.439312] pci 0000:00:1d.0: reg 20 io port: [0xfc00-0xfc1f]
  205. [    0.439354] pci 0000:00:1d.1: reg 20 io port: [0xf800-0xf81f]
  206. [    0.439396] pci 0000:00:1d.2: reg 20 io port: [0xf400-0xf41f]
  207. [    0.439437] pci 0000:00:1d.3: reg 20 io port: [0xf000-0xf01f]
  208. [    0.439477] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
  209. [    0.439512] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  210. [    0.439516] pci 0000:00:1d.7: PME# disabled
  211. [    0.439637] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
  212. [    0.439642] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
  213. [    0.439648] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
  214. [    0.439654] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
  215. [    0.439659] pci 0000:00:1f.1: reg 20 io port: [0xec00-0xec0f]
  216. [    0.439698] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807]
  217. [    0.439704] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403]
  218. [    0.439709] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007]
  219. [    0.439714] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03]
  220. [    0.439719] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f]
  221. [    0.439724] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
  222. [    0.439736] pci 0000:00:1f.2: PME# supported from D3hot
  223. [    0.439740] pci 0000:00:1f.2: PME# disabled
  224. [    0.439782] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
  225. [    0.439826] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
  226. [    0.439835] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
  227. [    0.439843] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
  228. [    0.439848] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
  229. [    0.439853] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff]
  230. [    0.439895] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
  231. [    0.439898] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
  232. [    0.439902] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
  233. [    0.439934] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
  234. [    0.439969] pci 0000:02:01.0: supports D1 D2
  235. [    0.439971] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
  236. [    0.439975] pci 0000:02:01.0: PME# disabled
  237. [    0.440021] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
  238. [    0.440056] pci 0000:02:04.0: supports D1 D2
  239. [    0.440090] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff]
  240. [    0.440096] pci 0000:02:08.0: reg 14 io port: [0xcc00-0xcc3f]
  241. [    0.440126] pci 0000:02:08.0: supports D1 D2
  242. [    0.440128] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
  243. [    0.440131] pci 0000:02:08.0: PME# disabled
  244. [    0.440164] pci 0000:00:1e.0: transparent bridge
  245. [    0.440167] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
  246. [    0.440171] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
  247. [    0.440183] bus 00 -> node 0
  248. [    0.440189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  249. [    0.440401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  250. [    0.449346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  251. [    0.449452] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  252. [    0.449558] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
  253. [    0.449662] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  254. [    0.449766] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
  255. [    0.449870] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  256. [    0.449976] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  257. [    0.450081] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
  258. [    0.450252] ACPI: WMI: Mapper loaded
  259. [    0.450307] SCSI subsystem initialized
  260. [    0.450307] libata version 3.00 loaded.
  261. [    0.450307] usbcore: registered new interface driver usbfs
  262. [    0.450307] usbcore: registered new interface driver hub
  263. [    0.450307] usbcore: registered new device driver usb
  264. [    0.450307] PCI: Using ACPI for IRQ routing
  265. [    0.456011] Bluetooth: Core ver 2.13
  266. [    0.456028] NET: Registered protocol family 31
  267. [    0.456028] Bluetooth: HCI device and connection manager initialized
  268. [    0.456028] Bluetooth: HCI socket layer initialized
  269. [    0.456028] NET: Registered protocol family 8
  270. [    0.456028] NET: Registered protocol family 20
  271. [    0.456041] NetLabel: Initializing
  272. [    0.456043] NetLabel:  domain hash size = 128
  273. [    0.456045] NetLabel:  protocols = UNLABELED CIPSOv4
  274. [    0.456060] NetLabel:  unlabeled traffic allowed by default
  275. [    0.456075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  276. [    0.456080] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  277. [    0.460072] AppArmor: AppArmor Filesystem Enabled
  278. [    0.468051] pnp: PnP ACPI init
  279. [    0.468060] ACPI: bus type pnp registered
  280. [    0.469468] ACPI Error (dsopcode-0595): Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) [20080926]
  281. [    0.469473] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.MEM_._CRS] (Node f6c17990), AE_AML_BUFFER_LIMIT
  282. [    0.469497] ACPI Error (uteval-0232): Method execution failed [\_SB_.MEM_._CRS] (Node f6c17990), AE_AML_BUFFER_LIMIT
  283. [    0.469502] pnp 00:0a: can't evaluate _CRS: 12298<6>pnp: PnP ACPI: found 11 devices
  284. [    0.469617] ACPI: ACPI bus type pnp unregistered
  285. [    0.469621] PnPBIOS: Disabled by ACPI PNP
  286. [    0.469628] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
  287. [    0.469630] system 00:01: ioport range 0x800-0x87f has been reserved
  288. [    0.469632] system 00:01: ioport range 0x294-0x297 has been reserved
  289. [    0.469634] system 00:01: ioport range 0x880-0x88f has been reserved
  290. [    0.469641] system 00:07: ioport range 0x400-0x4bf has been reserved
  291. [    0.469646] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved
  292. [    0.500653] Switched to high resolution mode on CPU 1
  293. [    0.504057] Switched to high resolution mode on CPU 0
  294. [    0.504304] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  295. [    0.504306] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
  296. [    0.504309] pci 0000:00:01.0:   MEM window: 0xf8000000-0xfbffffff
  297. [    0.504312] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
  298. [    0.504316] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
  299. [    0.504319] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
  300. [    0.504323] pci 0000:00:1e.0:   MEM window: 0xfde00000-0xfdefffff
  301. [    0.504326] pci 0000:00:1e.0:   PREFETCH window: disabled
  302. [    0.504337] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  303. [    0.504340] pci 0000:00:01.0: setting latency timer to 64
  304. [    0.504345] pci 0000:00:1e.0: setting latency timer to 64
  305. [    0.504348] bus: 00 index 0 io port: [0x00-0xffff]
  306. [    0.504350] bus: 00 index 1 mmio: [0x000000-0xffffffff]
  307. [    0.504352] bus: 01 index 0 io port: [0xb000-0xbfff]
  308. [    0.504354] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
  309. [    0.504355] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
  310. [    0.504357] bus: 01 index 3 mmio: [0x0-0x0]
  311. [    0.504358] bus: 02 index 0 io port: [0xc000-0xcfff]
  312. [    0.504360] bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
  313. [    0.504362] bus: 02 index 2 mmio: [0x0-0x0]
  314. [    0.504363] bus: 02 index 3 io port: [0x00-0xffff]
  315. [    0.504365] bus: 02 index 4 mmio: [0x000000-0xffffffff]
  316. [    0.504371] NET: Registered protocol family 2
  317. [    0.516083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  318. [    0.516329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  319. [    0.516616] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  320. [    0.516769] TCP: Hash tables configured (established 131072 bind 65536)
  321. [    0.516771] TCP reno registered
  322. [    0.524123] NET: Registered protocol family 1
  323. [    0.524251] checking if image is initramfs... it is
  324. [   10.065642] Freeing initrd memory: 7566k freed
  325. [   10.065865] cpufreq: No nForce2 chipset.
  326. [   10.065996] audit: initializing netlink socket (disabled)
  327. [   10.066023] type=2000 audit(1265849698.064:1): initialized
  328. [   10.071996] highmem bounce pool size: 64 pages
  329. [   10.072001] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  330. [   10.073118] VFS: Disk quotas dquot_6.5.1
  331. [   10.073166] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  332. [   10.073668] fuse init (API version 7.10)
  333. [   10.073736] msgmni has been set to 1671
  334. [   10.073901] alg: No test for stdrng (krng)
  335. [   10.073913] io scheduler noop registered
  336. [   10.073915] io scheduler anticipatory registered
  337. [   10.073917] io scheduler deadline registered
  338. [   10.073927] io scheduler cfq registered (default)
  339. [   10.074024] pci 0000:01:00.0: Boot video device
  340. [   10.074042] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
  341. [   10.075697] pcieport-driver 0000:00:01.0: setting latency timer to 64
  342. [   10.075724] pcieport-driver 0000:00:01.0: found MSI capability
  343. [   10.075745] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
  344. [   10.075753] pci_express 0000:00:01.0:pcie00: allocate port service
  345. [   10.075803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  346. [   10.075810] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  347. [   10.075930] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  348. [   10.075933] ACPI: Power Button (FF) [PWRF]
  349. [   10.075968] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  350. [   10.075970] ACPI: Power Button (CM) [PWRB]
  351. [   10.076011] fan PNP0C0B:00: registered as cooling_device0
  352. [   10.076016] ACPI: Fan [FAN] (on)
  353. [   10.076314] ACPI: SSDT BFEE7E00, 0175 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  354. [   10.076520] processor ACPI_CPU:00: registered as cooling_device1
  355. [   10.076647] ACPI: SSDT BFEE8210, 00CE (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
  356. [   10.076831] processor ACPI_CPU:01: registered as cooling_device2
  357. [   10.078430] thermal LNXTHERM:01: registered as thermal_zone0
  358. [   10.078686] ACPI: Thermal Zone [THRM] (26 C)
  359. [   10.078725] isapnp: Scanning for PnP cards...
  360. [   10.431665] isapnp: No Plug & Play device found
  361. [   10.440760] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
  362. [   10.441623] brd: module loaded
  363. [   10.441886] loop: module loaded
  364. [   10.441937] Fixed MDIO Bus: probed
  365. [   10.441942] PPP generic driver version 2.4.2
  366. [   10.441987] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  367. [   10.442010] Driver 'sd' needs updating - please use bus_type methods
  368. [   10.442020] Driver 'sr' needs updating - please use bus_type methods
  369. [   10.442050] ahci 0000:00:1f.2: version 3.0
  370. [   10.442062] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  371. [   10.442087] ahci 0000:00:1f.2: irq 2302 for MSI/MSI-X
  372. [   10.442140] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
  373. [   10.442142] ahci 0000:00:1f.2: flags: 64bit ncq led clo
  374. [   10.442146] ahci 0000:00:1f.2: setting latency timer to 64
  375. [   10.442392] scsi0 : ahci
  376. [   10.442461] scsi1 : ahci
  377. [   10.442513] scsi2 : ahci
  378. [   10.442562] scsi3 : ahci
  379. [   10.442640] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 2302
  380. [   10.442642] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 2302
  381. [   10.442645] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 2302
  382. [   10.442647] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 2302
  383. [   10.760037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  384. [   11.239449] ata1.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
  385. [   11.239452] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  386. [   11.242797] ata1.00: configured for UDMA/133
  387. [   11.560034] ata2: SATA link down (SStatus 0 SControl 300)
  388. [   12.284037] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  389. [   12.286050] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S755, max UDMA/33
  390. [   12.288571] ata3.00: configured for UDMA/33
  391. [   12.608035] ata4: SATA link down (SStatus 0 SControl 300)
  392. [   12.608161] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
  393. [   12.608280] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
  394. [   12.608293] sd 0:0:0:0: [sda] Write Protect is off
  395. [   12.608295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  396. [   12.608316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  397. [   12.608365] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
  398. [   12.608377] sd 0:0:0:0: [sda] Write Protect is off
  399. [   12.608379] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  400. [   12.608399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  401. [   12.608402]  sda: sda1 sda2 sda3
  402. [   12.619231] sd 0:0:0:0: [sda] Attached SCSI disk
  403. [   12.619280] sd 0:0:0:0: Attached scsi generic sg0 type 0
  404. [   12.621067] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-H30L  S755 PQ: 0 ANSI: 5
  405. [   12.743652] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
  406. [   12.743655] Uniform CD-ROM driver Revision: 3.20
  407. [   12.743757] sr 2:0:0:0: Attached scsi CD-ROM sr0
  408. [   12.743803] sr 2:0:0:0: Attached scsi generic sg1 type 5
  409. [   12.743854] ata_piix 0000:00:1f.1: version 2.12
  410. [   12.743864] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  411. [   12.743905] ata_piix 0000:00:1f.1: setting latency timer to 64
  412. [   12.743966] scsi4 : ata_piix
  413. [   12.744019] scsi5 : ata_piix
  414. [   12.744329] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
  415. [   12.744331] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
  416. [   12.900106] ata6: port disabled. ignoring.
  417. [   12.900667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  418. [   12.900683] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  419. [   12.900694] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  420. [   12.900696] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  421. [   12.900753] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  422. [   12.904659] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  423. [   12.904670] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
  424. [   12.920042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  425. [   12.920127] usb usb1: configuration #1 chosen from 1 choice
  426. [   12.920161] hub 1-0:1.0: USB hub found
  427. [   12.920170] hub 1-0:1.0: 8 ports detected
  428. [   12.920300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  429. [   12.920312] uhci_hcd: USB Universal Host Controller Interface driver
  430. [   12.920328] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  431. [   12.920332] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  432. [   12.920335] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  433. [   12.920366] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  434. [   12.920386] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
  435. [   12.920445] usb usb2: configuration #1 chosen from 1 choice
  436. [   12.920466] hub 2-0:1.0: USB hub found
  437. [   12.920471] hub 2-0:1.0: 2 ports detected
  438. [   12.920537] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  439. [   12.920542] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  440. [   12.920545] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  441. [   12.920576] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  442. [   12.920602] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f800
  443. [   12.920656] usb usb3: configuration #1 chosen from 1 choice
  444. [   12.920676] hub 3-0:1.0: USB hub found
  445. [   12.920681] hub 3-0:1.0: 2 ports detected
  446. [   12.920747] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  447. [   12.920752] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  448. [   12.920755] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  449. [   12.920786] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  450. [   12.920812] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f400
  451. [   12.920868] usb usb4: configuration #1 chosen from 1 choice
  452. [   12.920888] hub 4-0:1.0: USB hub found
  453. [   12.920893] hub 4-0:1.0: 2 ports detected
  454. [   12.920956] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  455. [   12.920961] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  456. [   12.920963] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  457. [   12.921005] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  458. [   12.921030] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f000
  459. [   12.921086] usb usb5: configuration #1 chosen from 1 choice
  460. [   12.921106] hub 5-0:1.0: USB hub found
  461. [   12.921111] hub 5-0:1.0: 2 ports detected
  462. [   12.921211] usbcore: registered new interface driver libusual
  463. [   12.921234] usbcore: registered new interface driver usbserial
  464. [   12.921244] USB Serial support registered for generic
  465. [   12.921258] usbcore: registered new interface driver usbserial_generic
  466. [   12.921260] usbserial: USB Serial Driver core
  467. [   12.921301] PNP: No PS/2 controller found. Probing ports directly.
  468. [   12.923513] serio: i8042 KBD port at 0x60,0x64 irq 1
  469. [   12.923518] serio: i8042 AUX port at 0x60,0x64 irq 12
  470. [   12.924069] mice: PS/2 mouse device common for all mice
  471. [   12.924220] rtc_cmos 00:04: RTC can wake from S4
  472. [   12.924255] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  473. [   12.924288] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
  474. [   12.924336] device-mapper: uevent: version 1.0.3
  475. [   12.924401] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
  476. [   12.924463] device-mapper: multipath: version 1.0.5 loaded
  477. [   12.924465] device-mapper: multipath round-robin: version 1.0.0 loaded
  478. [   12.924526] EISA: Probing bus 0 at eisa.0
  479. [   12.924550] EISA: Detected 0 cards.
  480. [   12.924593] cpuidle: using governor ladder
  481. [   12.924595] cpuidle: using governor menu
  482. [   12.925008] TCP cubic registered
  483. [   12.925085] NET: Registered protocol family 10
  484. [   12.925443] lo: Disabled Privacy Extensions
  485. [   12.925712] NET: Registered protocol family 17
  486. [   12.925726] Bluetooth: L2CAP ver 2.11
  487. [   12.925727] Bluetooth: L2CAP socket layer initialized
  488. [   12.925729] Bluetooth: SCO (Voice Link) ver 0.6
  489. [   12.925731] Bluetooth: SCO socket layer initialized
  490. [   12.925757] Bluetooth: RFCOMM socket layer initialized
  491. [   12.925763] Bluetooth: RFCOMM TTY layer initialized
  492. [   12.925764] Bluetooth: RFCOMM ver 1.10
  493. [   12.927748] Using IPI No-Shortcut mode
  494. [   12.927829] registered taskstats version 1
  495. [   12.927933]   Magic number: 14:686:910
  496. [   12.927995] rtc_cmos 00:04: setting system clock to 2010-02-11 00:55:01 UTC (1265849701)
  497. [   12.927997] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  498. [   12.927999] EDD information not available.
  499. [   12.928155] Freeing unused kernel memory: 532k freed
  500. [   12.928258] Write protecting the kernel text: 4128k
  501. [   12.928295] Write protecting the kernel read-only data: 1532k
  502. [   13.165033] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
  503. [   13.165035] e100: Copyright(c) 1999-2006 Intel Corporation
  504. [   13.165079] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  505. [   13.188860] e100 0000:02:08.0: PME# disabled
  506. [   13.190348] e100: eth0: e100_probe: addr 0xfdefd000, irq 20, MAC addr 00:1a:92:de:81:ff
  507. [   13.190374] ohci1394 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  508. [   13.242084] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
  509. [   13.300561] usb 1-7: new high speed USB device using ehci_hcd and address 3
  510. [   13.458482] usb 1-7: configuration #1 chosen from 1 choice
  511. [   13.463433] Initializing USB Mass Storage driver...
  512. [   13.464820] scsi6 : SCSI emulation for USB Mass Storage devices
  513. [   13.465395] usbcore: registered new interface driver usb-storage
  514. [   13.465398] USB Mass Storage support registered.
  515. [   13.465454] usb-storage: device found at 3
  516. [   13.465455] usb-storage: waiting for device to settle before scanning
  517. [   13.700507] usb 3-2: new low speed USB device using uhci_hcd and address 2
  518. [   13.909831] usb 3-2: configuration #1 chosen from 1 choice
  519. [   13.916656] usbcore: registered new interface driver hiddev
  520. [   13.916710] usbcore: registered new interface driver usbhid
  521. [   13.916713] usbhid: v2.6:USB HID core driver
  522. [   13.934047] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
  523. [   13.935369] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
  524. [   13.964162] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
  525. [   13.964716] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4
  526. [   13.972749] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
  527. [   14.544103] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800013aeed1]
  528. [   18.464733] usb-storage: device scan complete
  529. [   18.465339] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
  530. [   18.465965] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
  531. [   18.466590] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
  532. [   18.467215] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
  533. [   18.468780] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  534. [   18.468834] sd 6:0:0:0: Attached scsi generic sg2 type 0
  535. [   18.470427] sd 6:0:0:1: [sdc] Attached SCSI removable disk
  536. [   18.470465] sd 6:0:0:1: Attached scsi generic sg3 type 0
  537. [   18.471253] sd 6:0:0:2: [sdd] Attached SCSI removable disk
  538. [   18.471289] sd 6:0:0:2: Attached scsi generic sg4 type 0
  539. [   18.472004] sd 6:0:0:3: [sde] Attached SCSI removable disk
  540. [   18.472041] sd 6:0:0:3: Attached scsi generic sg5 type 0
  541. [   37.554065] ISO 9660 Extensions: Microsoft Joliet Level 3
  542. [   37.587248] ISO 9660 Extensions: RRIP_1991A
  543. [   37.901912] aufs 20080922
  544. [   38.182208] squashfs: version 3.3 (2007/10/31) Phillip Lougher
  545. [  110.995267] udev: starting version 141
  546. [  111.398822] Linux agpgart interface v0.103
  547. [  112.453456] input: PC Speaker as /devices/platform/pcspkr/input/input5
  548. [  112.562859] iTCO_vendor_support: vendor-support=0
  549. [  112.852690] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
  550. [  112.852860] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
  551. [  112.852910] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  552. [  113.839797] Linux video capture interface: v2.00
  553. [  114.388230] saa7130/34: v4l2 driver version 0.2.14 loaded
  554. [  114.388274] saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  555. [  114.388279] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 16, latency: 32, mmio: 0xfdefe000
  556. [  114.388284] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected]
  557. [  114.388326] saa7133[0]: board init: gpio is 0
  558. [  114.540041] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
  559. [  114.540055] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
  560. [  114.540069] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff
  561. [  114.540081] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  562. [  114.540094] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff
  563. [  114.540107] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  564. [  114.540120] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  565. [  114.540132] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  566. [  114.540145] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  567. [  114.540158] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  568. [  114.540171] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  569. [  114.540183] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  570. [  114.540196] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  571. [  114.540209] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  572. [  114.540221] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  573. [  114.540234] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  574. [  114.734647] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  575. [  114.734692] HDA Intel 0000:00:1b.0: setting latency timer to 64
  576. [  114.765931] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
  577. [  114.944107] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
  578. [  115.024040] tda829x 0-004b: setting tuner address to 61
  579. [  115.316040] tda829x 0-004b: type set to tda8290+75a
  580. [  119.172345] saa7133[0]: registered device video0 [v4l2]
  581. [  119.172365] saa7133[0]: registered device vbi0
  582. [  119.316231] saa7134 ALSA driver for DMA sound loaded
  583. [  119.316258] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 16 registered as card -2
  584. [  119.317244] dvb_init() allocating 1 frontend
  585. [  119.396081] DVB: registering new adapter (saa7133[0])
  586. [  119.396084] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
  587. [  119.468524] tda1004x: setting up plls for 48MHz sampling clock
  588. [  119.752040] tda1004x: found firmware revision 29 -- ok
  589. [  131.622779] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  590. [  131.622781] Bluetooth: BNEP filters: protocol multicast
  591. [  131.722603] Bridge firewalling registered
  592. [  142.354091] lp: driver loaded but no devices found
  593. [  142.441100] ADDRCONF(NETDEV_UP): eth0: link is not ready
  594. [  142.444138] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
  595. [  142.445189] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  596. [  142.561613] ppdev: user-space parallel port driver
  597. [  149.687885] mtrr: no MTRR for e0000000,10000000 found
  598. [  153.372027] eth0: no IPv6 routers present
  599. [  525.068015] usb 1-5: new high speed USB device using ehci_hcd and address 4
  600. [  525.202113] usb 1-5: configuration #1 chosen from 1 choice
  601. [  525.202747] scsi7 : SCSI emulation for USB Mass Storage devices
  602. [  525.213579] usb-storage: device found at 4
  603. [  525.213583] usb-storage: waiting for device to settle before scanning
  604. [  530.212213] usb-storage: device scan complete
  605. [  530.212956] scsi 7:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2 CCS
  606. [  530.214435] sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  607. [  530.215183] sd 7:0:0:0: [sdf] Write Protect is off
  608. [  530.215186] sd 7:0:0:0: [sdf] Mode Sense: 00 38 00 00
  609. [  530.215189] sd 7:0:0:0: [sdf] Assuming drive cache: write through
  610. [  530.228814] sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  611. [  530.229555] sd 7:0:0:0: [sdf] Write Protect is off
  612. [  530.229558] sd 7:0:0:0: [sdf] Mode Sense: 00 38 00 00
  613. [  530.229561] sd 7:0:0:0: [sdf] Assuming drive cache: write through
  614. [  530.229566]  sdf: sdf1 sdf2 sdf3 sdf4
  615. [  530.236032] sd 7:0:0:0: [sdf] Attached SCSI disk
  616. [  530.236112] sd 7:0:0:0: Attached scsi generic sg6 type 0
  617. [  530.368718] usb 1-5: USB disconnect, address 4
  618. [  530.368861] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  619. [  530.368867] end_request: I/O error, dev sdf, sector 6136830
  620. [  530.368872] Buffer I/O error on device sdf3, logical block 0
  621. [  530.368875] Buffer I/O error on device sdf3, logical block 1
  622. [  530.368879] Buffer I/O error on device sdf3, logical block 2
  623. [  530.368882] Buffer I/O error on device sdf3, logical block 3
  624. [  530.368885] Buffer I/O error on device sdf3, logical block 4
  625. [  530.368888] Buffer I/O error on device sdf3, logical block 5
  626. [  530.368892] Buffer I/O error on device sdf3, logical block 6
  627. [  530.368895] Buffer I/O error on device sdf3, logical block 7
  628. [  530.368901] Buffer I/O error on device sdf3, logical block 8
  629. [  530.368905] Buffer I/O error on device sdf3, logical block 9
  630. [  530.368971] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  631. [  530.368975] end_request: I/O error, dev sdf, sector 8112825
  632. [  530.369027] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  633. [  530.369031] end_request: I/O error, dev sdf, sector 5927747
  634. [  530.369093] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  635. [  530.369097] end_request: I/O error, dev sdf, sector 6136625
  636. [  530.369154] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  637. [  530.369157] end_request: I/O error, dev sdf, sector 6136830
  638. [  530.369211] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  639. [  530.369215] end_request: I/O error, dev sdf, sector 8112825
  640. [  530.369264] sd 7:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  641. [  530.369268] end_request: I/O error, dev sdf, sector 5927747
  642. [  530.372217] scsi 7:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  643. [  530.372222] end_request: I/O error, dev sdf, sector 6136625
  644. [  530.372242] scsi 7:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  645. [  530.372246] end_request: I/O error, dev sdf, sector 5927963
  646. [  536.184018] usb 1-5: new high speed USB device using ehci_hcd and address 5
  647. [  536.318962] usb 1-5: configuration #1 chosen from 1 choice
  648. [  536.324027] scsi8 : SCSI emulation for USB Mass Storage devices
  649. [  536.325569] usb-storage: device found at 5
  650. [  536.325572] usb-storage: waiting for device to settle before scanning
  651. [  541.324170] usb-storage: device scan complete
  652. [  541.324913] scsi 8:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2 CCS
  653. [  541.326401] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  654. [  541.336536] sd 8:0:0:0: [sdf] Write Protect is off
  655. [  541.336540] sd 8:0:0:0: [sdf] Mode Sense: 00 38 00 00
  656. [  541.336543] sd 8:0:0:0: [sdf] Assuming drive cache: write through
  657. [  541.337765] sd 8:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  658. [  541.338511] sd 8:0:0:0: [sdf] Write Protect is off
  659. [  541.338515] sd 8:0:0:0: [sdf] Mode Sense: 00 38 00 00
  660. [  541.338517] sd 8:0:0:0: [sdf] Assuming drive cache: write through
  661. [  541.338522]  sdf: sdf1 sdf2 sdf3 sdf4
  662. [  541.343678] sd 8:0:0:0: [sdf] Attached SCSI disk
  663. [  541.343759] sd 8:0:0:0: Attached scsi generic sg6 type 0
  664. [  541.516344] usb 1-5: USB disconnect, address 5
  665. [  541.517259] scsi 8:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  666. [  541.517265] end_request: I/O error, dev sdf, sector 6136625
  667. [  541.517269] __ratelimit: 483 callbacks suppressed
  668. [  541.517273] Buffer I/O error on device sdf2, logical block 208640
  669. [  541.517277] Buffer I/O error on device sdf2, logical block 208641
  670. [  541.517280] Buffer I/O error on device sdf2, logical block 208642
  671. [  541.517284] Buffer I/O error on device sdf2, logical block 208643
  672. [  541.517287] Buffer I/O error on device sdf2, logical block 208644
  673. [  541.517291] Buffer I/O error on device sdf2, logical block 208645
  674. [  541.517294] Buffer I/O error on device sdf2, logical block 208646
  675. [  541.517298] Buffer I/O error on device sdf2, logical block 208647
  676. [  541.517313] Buffer I/O error on device sdf3, logical block 1975808
  677. [  541.517316] Buffer I/O error on device sdf3, logical block 1975809
  678. [  541.517329] scsi 8:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  679. [  541.517334] end_request: I/O error, dev sdf, sector 976767929
  680. [  547.312020] usb 1-5: new high speed USB device using ehci_hcd and address 6
  681. [  547.445768] usb 1-5: configuration #1 chosen from 1 choice
  682. [  547.446402] scsi9 : SCSI emulation for USB Mass Storage devices
  683. [  547.446616] usb-storage: device found at 6
  684. [  547.446619] usb-storage: waiting for device to settle before scanning
  685. [  552.444254] usb-storage: device scan complete
  686. [  552.444994] scsi 9:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2 CCS
  687. [  552.446651] sd 9:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  688. [  552.456554] sd 9:0:0:0: [sdf] Write Protect is off
  689. [  552.456558] sd 9:0:0:0: [sdf] Mode Sense: 00 38 00 00
  690. [  552.456561] sd 9:0:0:0: [sdf] Assuming drive cache: write through
  691. [  552.461723] sd 9:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  692. [  552.462472] sd 9:0:0:0: [sdf] Write Protect is off
  693. [  552.462476] sd 9:0:0:0: [sdf] Mode Sense: 00 38 00 00
  694. [  552.462478] sd 9:0:0:0: [sdf] Assuming drive cache: write through
  695. [  552.462483]  sdf: sdf1 sdf2 sdf3 sdf4
  696. [  552.471812] sd 9:0:0:0: [sdf] Attached SCSI disk
  697. [  552.471896] sd 9:0:0:0: Attached scsi generic sg6 type 0
  698. [  552.606133] usb 1-5: USB disconnect, address 6
  699. [  552.607536] scsi 9:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  700. [  552.607541] end_request: I/O error, dev sdf, sector 8112825
  701. [  552.607546] __ratelimit: 606 callbacks suppressed
  702. [  552.607550] Buffer I/O error on device sdf4, logical block 0
  703. [  552.607557] Buffer I/O error on device sdf4, logical block 1
  704. [  552.607560] Buffer I/O error on device sdf4, logical block 2
  705. [  552.607564] Buffer I/O error on device sdf4, logical block 3
  706. [  552.607576] Buffer I/O error on device sdf2, logical block 208640
  707. [  552.607580] Buffer I/O error on device sdf2, logical block 208641
  708. [  552.607583] Buffer I/O error on device sdf2, logical block 208642
  709. [  552.607587] Buffer I/O error on device sdf2, logical block 208643
  710. [  552.607591] Buffer I/O error on device sdf2, logical block 208644
  711. [  552.607594] Buffer I/O error on device sdf2, logical block 208645
  712. [  552.607614] scsi 9:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  713. [  552.607618] end_request: I/O error, dev sdf, sector 48195
  714. [  558.396015] usb 1-5: new high speed USB device using ehci_hcd and address 7
  715. [  558.530104] usb 1-5: configuration #1 chosen from 1 choice
  716. [  558.530716] scsi10 : SCSI emulation for USB Mass Storage devices
  717. [  558.537707] usb-storage: device found at 7
  718. [  558.537711] usb-storage: waiting for device to settle before scanning
  719. [  563.536213] usb-storage: device scan complete
  720. [  563.536947] scsi 10:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2 CCS
  721. [  563.538425] sd 10:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  722. [  563.539170] sd 10:0:0:0: [sdf] Write Protect is off
  723. [  563.539173] sd 10:0:0:0: [sdf] Mode Sense: 00 38 00 00
  724. [  563.539176] sd 10:0:0:0: [sdf] Assuming drive cache: write through
  725. [  563.548523] sd 10:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  726. [  563.549303] sd 10:0:0:0: [sdf] Write Protect is off
  727. [  563.549306] sd 10:0:0:0: [sdf] Mode Sense: 00 38 00 00
  728. [  563.549309] sd 10:0:0:0: [sdf] Assuming drive cache: write through
  729. [  563.549315]  sdf: sdf1 sdf2 sdf3 sdf4
  730. [  563.556147] sd 10:0:0:0: [sdf] Attached SCSI disk
  731. [  563.556227] sd 10:0:0:0: Attached scsi generic sg6 type 0
  732. [  563.690338] usb 1-5: USB disconnect, address 7
  733. [  563.699972] scsi 10:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  734. [  563.699978] end_request: I/O error, dev sdf, sector 5927747
  735. [  563.699983] __ratelimit: 591 callbacks suppressed
  736. [  563.699986] Buffer I/O error on device sdf1, logical block 2939776
  737. [  563.699991] Buffer I/O error on device sdf1, logical block 2939777
  738. [  563.699995] Buffer I/O error on device sdf1, logical block 2939778
  739. [  563.700015] Buffer I/O error on device sdf1, logical block 2939779
  740. [  563.700030] Buffer I/O error on device sdf2, logical block 208640
  741. [  563.700034] Buffer I/O error on device sdf2, logical block 208641
  742. [  563.700038] Buffer I/O error on device sdf2, logical block 208642
  743. [  563.700042] Buffer I/O error on device sdf2, logical block 208643
  744. [  563.700045] Buffer I/O error on device sdf2, logical block 208644
  745. [  563.700049] Buffer I/O error on device sdf2, logical block 208645
  746. [  563.700102] scsi 10:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  747. [  563.700107] end_request: I/O error, dev sdf, sector 5928009
  748. [  569.472019] usb 1-5: new high speed USB device using ehci_hcd and address 8
  749. [  569.605796] usb 1-5: configuration #1 chosen from 1 choice
  750. [  569.606417] scsi11 : SCSI emulation for USB Mass Storage devices
  751. [  569.606586] usb-storage: device found at 8
  752. [  569.606589] usb-storage: waiting for device to settle before scanning
  753. [  574.604161] usb-storage: device scan complete
  754. [  574.604896] scsi 11:0:0:0: Direct-Access     WDC WD50 00AAVS-00ZTB0         PQ: 0 ANSI: 2 CCS
  755. [  574.605877] sd 11:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  756. [  574.606628] sd 11:0:0:0: [sdf] Write Protect is off
  757. [  574.606632] sd 11:0:0:0: [sdf] Mode Sense: 00 38 00 00
  758. [  574.606634] sd 11:0:0:0: [sdf] Assuming drive cache: write through
  759. [  574.616521] sd 11:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
  760. [  574.617254] sd 11:0:0:0: [sdf] Write Protect is off
  761. [  574.617257] sd 11:0:0:0: [sdf] Mode Sense: 00 38 00 00
  762. [  574.617260] sd 11:0:0:0: [sdf] Assuming drive cache: write through
  763. [  574.617265]  sdf: sdf1 sdf2 sdf3 sdf4
  764. [  574.628969] sd 11:0:0:0: [sdf] Attached SCSI disk
  765. [  574.629053] sd 11:0:0:0: Attached scsi generic sg6 type 0
  766. [  574.737785] usb 1-5: USB disconnect, address 8
  767. [  574.737943] sd 11:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  768. [  574.737948] end_request: I/O error, dev sdf, sector 5927985
  769. [  574.737953] __ratelimit: 491 callbacks suppressed
  770. [  574.737956] Buffer I/O error on device sdf2, logical block 0
  771. [  574.737960] Buffer I/O error on device sdf2, logical block 1
  772. [  574.737964] Buffer I/O error on device sdf2, logical block 2
  773. [  574.737967] Buffer I/O error on device sdf2, logical block 3
  774. [  574.737970] Buffer I/O error on device sdf2, logical block 4
  775. [  574.737973] Buffer I/O error on device sdf2, logical block 5
  776. [  574.737977] Buffer I/O error on device sdf2, logical block 6
  777. [  574.737980] Buffer I/O error on device sdf2, logical block 7
  778. [  574.737985] Buffer I/O error on device sdf2, logical block 8
  779. [  574.737988] Buffer I/O error on device sdf2, logical block 9
  780. [  574.738081] sd 11:0:0:0: [sdf] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
  781. [  574.738085] end_request: I/O error, dev sdf, sector 6136830
  782. [  574.739856] scsi 11:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  783. [  574.739861] end_request: I/O error, dev sdf, sector 8112825
  784. [  574.739888] scsi 11:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
  785. [  574.739892] end_request: I/O error, dev sdf, sector 5927985
RAW Paste Data
Top