Guest User

Untitled

a guest
Oct 23rd, 2018
283
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. systemupgrade_ip [get_ips {system_processing_system7_0_0 system_rst_vid_clk_dyn_0 system_MIPI_D_PHY_RX_0_0 system_rgb2dvi_0_0 system_axi_vdma_0_0 system_vtg_0 system_axi_mem_intercon_0 system_clk_wiz_0_0 system_rst_clk_wiz_0_50M_0 system_video_dynclk_1 system_AXI_GammaCorrection_0_0 system_AXI_BayerToRGB_1_0 system_MIPI_CSI_2_RX_0_0 system_v_axi4s_vid_out_0_0 system_axi_mem_intercon_1_0 system_ps7_0_axi_periph_0 system_xlconcat_0_0}] -log ip_upgrade.log
  2. [PSU-1] Parameter : PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 has negative value -0.073 . PS DDR interfaces might fail when entering negative DQS skew values.
  3. [PSU-2] Parameter : PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 has negative value -0.034 . PS DDR interfaces might fail when entering negative DQS skew values.
  4. [PSU-3] Parameter : PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 has negative value -0.03 . PS DDR interfaces might fail when entering negative DQS skew values.
  5. [PSU-4] Parameter : PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 has negative value -0.082 . PS DDR interfaces might fail when entering negative DQS skew values.
  6. SynthesisOut-of-Context Module Runssystemsystem_MIPI_D_PHY_RX_0_0_synth_1[Designutils 20-1280] Could not find module 'ila_sfen_rxclk'. The XDC file /home/<user>/Downloads/Zybo-Z7-20-pcam-5c-master/src/bd/system/ip/system_MIPI_D_PHY_RX_0_0/hdl/ila_sfen_rxclk/ila_v6_2/constraints/ila.xdc will not be read for any cell of this module.
  7. ImplementationDesign Initialization[Designutils 20-1280] Could not find module 'ila_sfen_rxclk'. The XDC file /home/<user>/Downloads/Zybo-Z7-20-pcam-5c-master/src/bd/system/ip/system_MIPI_D_PHY_RX_0_0/hdl/ila_sfen_rxclk/ila_v6_2/constraints/ila.xdc will not be read for any cell of this module.
  8. Place Design[Place 30-487] The packing of instances into the device could not be obeyed. There are a total of 4400 slices in the pblock, of which 2903 slices are available, however, the unplaced instances require 3493 slices. Please analyze your design to determine if the number of LUTs, FFs, and/or control sets can be reduced.
  9.  
  10. Number of control sets and instances constrained to the design
  11. Control sets: 808
  12. Luts: 16409 (combined) 18202 (total), available capacity: 17600
  13. Flip flops: 18901, available capacity: 35200
  14. NOTE: each slice can only accommodate 1 unique control set so FFs cannot be packed to fully fill every slice
  15.  
  16.  
  17. [Place 30-99] Placer failed with error: 'Detail Placement failed please check previous errors for details.'
  18. Please review all ERROR, CRITICAL WARNING, and WARNING messages during placement to understand the cause for failure.
  19. [Common 17-69] Command failed: Placer could not place all instances
RAW Paste Data