Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:16 +0000)
- Trying to boot from SPI
- U-Boot 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- PMIC: RK808
- MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... Card did not respond to voltage select!
- *** Warning - No block device, using default environment
- In: serial
- Out: vidconsole
- Err: vidconsole
- Model: Pine64 RockPro64
- rockchip_dnl_key_pressed: adc_channel_single_shot fail!
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- Card did not respond to voltage select!
- Device 0: unknown device
- scanning bus for devices...
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- Target spinup took 0 ms.
- AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
- flags: 64bit ncq stag pm led clo pmp fbss pio slum part ccc apst boh
- Device 0: (0:0) Vendor: ATA Prod.: HGST HTS541010A9 Rev: JA0O
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- Device 1: (1:0) Vendor: ATA Prod.: ST1000LM024 HN-M Rev: 2BA3
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- Device 2: (2:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
- Type: Hard Disk
- Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
- Device 3: (3:0) Vendor: ATA Prod.: KINGSTON SS200S3 Rev: S8FM
- Type: Hard Disk
- Capacity: 28626.1 MB = 27.9 GB (58626288 x 512)
- Device 4: (4:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
- Type: Hard Disk
- Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
- Device 0: (0:0) Vendor: ATA Prod.: HGST HTS541010A9 Rev: JA0O
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- ... is now current device
- Scanning scsi 0:1...
- Device 1: (1:0) Vendor: ATA Prod.: ST1000LM024 HN-M Rev: 2BA3
- Type: Hard Disk
- Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
- ... is now current device
- ** Unrecognized filesystem type **
- Device 2: (2:0) Vendor: ATA Prod.: ST2000LM015-2E81 Rev: SDM1
- Type: Hard Disk
- Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
- ... is now current device
- ** Unrecognized filesystem type **
- Device 3: (3:0) Vendor: ATA Prod.: KINGSTON SS200S3 Rev: S8FM
- Type: Hard Disk
- Capacity: 28626.1 MB = 27.9 GB (58626288 x 512)
- ... is now current device
- Scanning scsi 3:3...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 937 bytes read in 10 ms (90.8 KiB/s)
- select kernel
- 1: kernel-5.6.0-1132-ayufan-g81043e6e109a
- 2: kernel-5.6.0-1132-ayufan-g81043e6e109a-memtest
- Enter choice: 1: kernel-5.6.0-1132-ayufan-g81043e6e109a
- Retrieving file: /initrd.img-5.6.0-1132-ayufan-g81043e6e109a
- 13257282 bytes read in 220 ms (57.5 MiB/s)
- Retrieving file: /vmlinuz-5.6.0-1132-ayufan-g81043e6e109a
- 22915584 bytes read in 374 ms (58.4 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
- Retrieving file: /dtbs/5.6.0-1132-ayufan-g81043e6e109a/rockchip/rk3399-rockpro6b
- 56691 bytes read in 14 ms (3.9 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to 79263000, end 79f07a42 ... OK
- Loading Device Tree to 0000000079252000, end 0000000079262d72 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.6.0-1132-ayufan-g81043e6e109a (root@runner-f725f0
- [ 0.000000] Machine model: Pine64 RockPro64 v2.1
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=14
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 1878640K/2095104K available (14012K kernel code, 1130K r)
- [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x000000007b040000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b05000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.001434] Console: colour dummy device 80x25
- [ 0.002038] printk: console [tty0] enabled
- [ 0.002095] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.002125] pid_max: default: 32768 minimum: 301
- [ 0.002378] LSM: Security Framework initializing
- [ 0.002410] Yama: becoming mindful.
- [ 0.002528] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
- [ 0.002563] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002661] *** VALIDATE tmpfs ***
- [ 0.003377] *** VALIDATE proc ***
- [ 0.003721] *** VALIDATE cgroup ***
- [ 0.003742] *** VALIDATE cgroup2 ***
- [ 0.005113] rcu: Hierarchical SRCU implementation.
- [ 0.007678] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.008115] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.008860] EFI services will not be available.
- [ 0.009531] smp: Bringing up secondary CPUs ...
- [ 0.010288] Detected VIPT I-cache on CPU1
- [ 0.010329] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.010345] GICv3: CPU1: using allocated LPI pending table @0x000000007b06000
- [ 0.010396] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.011169] Detected VIPT I-cache on CPU2
- [ 0.011198] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.011211] GICv3: CPU2: using allocated LPI pending table @0x000000007b07000
- [ 0.011243] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.011927] Detected VIPT I-cache on CPU3
- [ 0.011954] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.011967] GICv3: CPU3: using allocated LPI pending table @0x000000007b10000
- [ 0.011997] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.012698] CPU features: detected: EL2 vector hardening
- [ 0.012708] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.012714] CPU features: detected: ARM erratum 1319367
- [ 0.012720] Detected PIPT I-cache on CPU4
- [ 0.012755] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.012768] GICv3: CPU4: using allocated LPI pending table @0x000000007b11000
- [ 0.012802] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.013539] Detected PIPT I-cache on CPU5
- [ 0.013564] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.013577] GICv3: CPU5: using allocated LPI pending table @0x000000007b12000
- [ 0.013604] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.013716] smp: Brought up 1 node, 6 CPUs
- [ 0.014011] SMP: Total of 6 processors activated.
- [ 0.014029] CPU features: detected: 32-bit EL0 Support
- [ 0.014046] CPU features: detected: CRC32 instructions
- [ 0.047975] CPU: All CPU(s) started at EL2
- [ 0.048071] alternatives: patching kernel code
- [ 0.050965] devtmpfs: initialized
- [ 0.062607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.062654] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.065978] pinctrl core: initialized pinctrl subsystem
- [ 0.067036] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.067041] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.067066] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.067083] thermal_sys: Registered thermal governor 'user_space'
- [ 0.067099] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.067753] DMI not present or invalid.
- [ 0.068631] NET: Registered protocol family 16
- [ 0.071395] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.072614] cpuidle: using governor ladder
- [ 0.072646] cpuidle: using governor menu
- [ 0.073115] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.073311] ASID allocator initialised with 65536 entries
- [ 0.073458] Serial: AMBA PL011 UART driver
- [ 0.110005] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.110028] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.110042] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.110055] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.553245] cryptd: max_cpu_qlen set to 1000
- [ 1.584877] ACPI: Interpreter disabled.
- [ 1.586461] vcc3v3_pcie: supplied by vcc12v_dcin
- [ 1.588130] vcc5v0_sys: supplied by vcc12v_dcin
- [ 1.588497] vcc5v0_usb: supplied by vcc12v_dcin
- [ 1.588713] vcc3v3_sys: supplied by vcc5v0_sys
- [ 1.589396] iommu: Default domain type: Translated
- [ 1.591898] vgaarb: loaded
- [ 1.593012] SCSI subsystem initialized
- [ 1.593591] usbcore: registered new interface driver usbfs
- [ 1.593663] usbcore: registered new interface driver hub
- [ 1.593793] usbcore: registered new device driver usb
- [ 1.594509] mc: Linux media interface: v0.10
- [ 1.594561] videodev: Linux video capture interface: v2.00
- [ 1.594655] pps_core: LinuxPPS API ver. 1 registered
- [ 1.594672] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.594708] PTP clock support registered
- [ 1.594980] EDAC MC: Ver: 3.0.0
- [ 1.595924] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.596618] NetLabel: Initializing
- [ 1.596636] NetLabel: domain hash size = 128
- [ 1.596649] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.596737] NetLabel: unlabeled traffic allowed by default
- [ 1.597593] clocksource: Switched to clocksource arch_sys_counter
- [ 1.597621] *** VALIDATE bpf ***
- [ 1.597938] VFS: Disk quotas dquot_6.6.0
- [ 1.598032] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.598137] *** VALIDATE ramfs ***
- [ 1.598170] *** VALIDATE hugetlbfs ***
- [ 1.598671] pnp: PnP ACPI: disabled
- [ 1.608036] NET: Registered protocol family 2
- [ 1.608960] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
- [ 1.609035] TCP established hash table entries: 16384 (order: 5, 131072 byte)
- [ 1.609261] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
- [ 1.609647] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.609808] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.609900] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.610203] NET: Registered protocol family 1
- [ 1.610898] RPC: Registered named UNIX socket transport module.
- [ 1.610918] RPC: Registered udp transport module.
- [ 1.610932] RPC: Registered tcp transport module.
- [ 1.610945] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.610969] PCI: CLS 0 bytes, default 64
- [ 1.611192] Trying to unpack rootfs image as initramfs...
- [ 2.515280] Freeing initrd memory: 12944K
- [ 2.516448] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 2.516788] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 2.517253] kvm [1]: IPA Size Limit: 40bits
- [ 2.518918] kvm [1]: vgic-v2@fff20000
- [ 2.518958] kvm [1]: GIC system register CPU interface enabled
- [ 2.519161] kvm [1]: vgic interrupt IRQ10
- [ 2.519393] kvm [1]: Hyp mode initialized successfully
- [ 3.485109] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485155] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485182] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485207] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485232] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485256] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485281] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485306] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485331] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485356] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485381] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485405] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485430] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485455] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.485480] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
- [ 3.488851] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 3.497920] zbud: loaded
- [ 3.500901] *** VALIDATE nfs ***
- [ 3.500999] *** VALIDATE nfs4 ***
- [ 3.501110] NFS: Registering the id_resolver key type
- [ 3.501151] Key type id_resolver registered
- [ 3.501166] Key type id_legacy registered
- [ 3.501190] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.501239] ntfs: driver 2.1.32 [Flags: R/W].
- [ 3.501752] fuse: init (API version 7.31)
- [ 3.501883] *** VALIDATE fuseblk ***
- [ 3.501905] *** VALIDATE fuse ***
- [ 3.502309] SGI XFS with ACLs, security attributes, quota, no debug enabled
- [ 3.504466] *** VALIDATE xfs ***
- [ 3.542546] NET: Registered protocol family 38
- [ 3.542586] Key type asymmetric registered
- [ 3.542603] Asymmetric key parser 'x509' registered
- [ 3.542683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 3.542912] io scheduler mq-deadline registered
- [ 3.542932] io scheduler kyber registered
- [ 3.543177] io scheduler bfq registered
- [ 3.545811] vcc5v0_host: supplied by vcc5v0_usb
- [ 3.553229] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not fr
- [ 3.553304] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not fr
- [ 3.599854] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 3.599913] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff0
- [ 3.599950] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff0
- [ 3.600340] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
- [ 3.600369] pci_bus 0000:00: root bus resource [bus 00-1f]
- [ 3.600392] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
- [ 3.600417] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
- [ 3.600480] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
- [ 3.600624] pci 0000:00:00.0: supports D1
- [ 3.600644] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.607004] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
- [ 3.607221] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
- [ 3.607360] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 3.607385] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
- [ 3.607432] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 3.607454] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
- [ 3.607500] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
- [ 3.607522] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
- [ 3.607568] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
- [ 3.607624] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
- [ 3.607672] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
- [ 3.607694] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
- [ 3.607742] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
- [ 3.607791] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 3.607843] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
- [ 3.608188] pci 0000:01:00.0: PME# supported from D3hot
- [ 3.608482] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited b)
- [ 3.614690] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
- [ 3.614740] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
- [ 3.614771] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pre]
- [ 3.614799] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
- [ 3.614832] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
- [ 3.614853] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
- [ 3.614874] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
- [ 3.614894] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
- [ 3.614915] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
- [ 3.614935] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
- [ 3.614956] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
- [ 3.614975] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
- [ 3.614996] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
- [ 3.615016] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
- [ 3.615038] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.615062] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
- [ 3.615317] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 3.615675] pcieport 0000:00:00.0: PME: Signaling with IRQ 229
- [ 3.616009] pcieport 0000:00:00.0: AER: enabled with IRQ 229
- [ 3.617147] IPMI message handler: version 39.2
- [ 3.619501] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.619526] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 3.620692] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.620714] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 3.622249] pwm-regulator: supplied by regulator-dummy
- [ 3.622464] vcc5v0_typec: supplied by vcc5v0_usb
- [ 3.623222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 3.625017] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
- [ 3.625173] serial serial0: tty port ttyS0 registered
- [ 3.625640] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
- [ 3.766072] printk: console [ttyS2] enabled
- [ 3.769009] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 3.770268] ahci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 3.771383] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 3.772088] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f ie
- [ 3.772818] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs
- [ 3.778849] scsi host0: ahci
- [ 3.779655] scsi host1: ahci
- [ 3.780347] scsi host2: ahci
- [ 3.781027] scsi host3: ahci
- [ 3.781714] scsi host4: ahci
- [ 3.782166] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 ir0
- [ 3.782836] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 ir1
- [ 3.783501] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 ir2
- [ 3.784166] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 ir3
- [ 3.784832] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 ir4
- [ 3.788698] spi-nor spi0.0: gd25q128 (16384 Kbytes)
- [ 3.811225] libphy: Fixed MDIO Bus: probed
- [ 3.817423] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 3.825406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.826025] ehci-pci: EHCI PCI platform driver
- [ 3.826465] ehci-platform: EHCI generic platform driver
- [ 3.829209] ehci-platform fe380000.usb: EHCI Host Controller
- [ 3.829856] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 3.830665] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
- [ 3.857603] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 3.858338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.859074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.859717] usb usb1: Product: EHCI Host Controller
- [ 3.860154] usb usb1: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ehd
- [ 3.860826] usb usb1: SerialNumber: fe380000.usb
- [ 3.861661] hub 1-0:1.0: USB hub found
- [ 3.862029] hub 1-0:1.0: 1 port detected
- [ 3.864874] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 3.865535] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 3.866321] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
- [ 3.887614] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 3.888329] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 3.889066] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.889708] usb usb2: Product: EHCI Host Controller
- [ 3.890145] usb usb2: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ehd
- [ 3.890817] usb usb2: SerialNumber: fe3c0000.usb
- [ 3.891610] hub 2-0:1.0: USB hub found
- [ 3.891977] hub 2-0:1.0: 1 port detected
- [ 3.892901] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.893464] ohci-pci: OHCI PCI platform driver
- [ 3.893915] ohci-platform: OHCI generic platform driver
- [ 3.894579] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 3.895328] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 3.896142] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
- [ 3.961889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 3.962625] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 3.963268] usb usb3: Product: Generic Platform OHCI controller
- [ 3.963795] usb usb3: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ohd
- [ 3.964467] usb usb3: SerialNumber: fe3a0000.usb
- [ 3.965267] hub 3-0:1.0: USB hub found
- [ 3.965634] hub 3-0:1.0: 1 port detected
- [ 3.966431] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 3.967184] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 3.968315] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
- [ 4.041855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b6
- [ 4.042616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.043266] usb usb4: Product: Generic Platform OHCI controller
- [ 4.043799] usb usb4: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a ohd
- [ 4.044478] usb usb4: SerialNumber: fe3e0000.usb
- [ 4.045491] hub 4-0:1.0: USB hub found
- [ 4.045872] hub 4-0:1.0: 1 port detected
- [ 4.047048] uhci_hcd: USB Universal Host Controller Interface driver
- [ 4.048785] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.049483] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 4.050336] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.051204] xhci-hcd xhci-hcd.0.auto: irq 238, io mem 0xfe800000
- [ 4.052133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.052880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.053529] usb usb5: Product: xHCI Host Controller
- [ 4.053972] usb usb5: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.054651] usb usb5: SerialNumber: xhci-hcd.0.auto
- [ 4.055620] hub 5-0:1.0: USB hub found
- [ 4.056001] hub 5-0:1.0: 1 port detected
- [ 4.056756] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.057468] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 4.058198] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.058863] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 4.059742] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.060486] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.061135] usb usb6: Product: xHCI Host Controller
- [ 4.061577] usb usb6: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.062256] usb usb6: SerialNumber: xhci-hcd.0.auto
- [ 4.063229] hub 6-0:1.0: USB hub found
- [ 4.063607] hub 6-0:1.0: 1 port detected
- [ 4.064555] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.065241] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 4.066089] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.066993] xhci-hcd xhci-hcd.1.auto: irq 239, io mem 0xfe900000
- [ 4.067937] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, b6
- [ 4.068683] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.069333] usb usb7: Product: xHCI Host Controller
- [ 4.069774] usb usb7: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.070453] usb usb7: SerialNumber: xhci-hcd.1.auto
- [ 4.071423] hub 7-0:1.0: USB hub found
- [ 4.071800] hub 7-0:1.0: 1 port detected
- [ 4.072547] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.073210] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 4.073911] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.074574] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 4.075444] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, b6
- [ 4.076188] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 4.076836] usb usb8: Product: xHCI Host Controller
- [ 4.077279] usb usb8: Manufacturer: Linux 5.6.0-1132-ayufan-g81043e6e109a xhd
- [ 4.077982] usb usb8: SerialNumber: xhci-hcd.1.auto
- [ 4.078964] hub 8-0:1.0: USB hub found
- [ 4.079347] hub 8-0:1.0: 1 port detected
- [ 4.080277] usbcore: registered new interface driver uas
- [ 4.080964] usbcore: registered new interface driver usb-storage
- [ 4.081555] usbcore: registered new interface driver ums-alauda
- [ 4.082133] usbcore: registered new interface driver ums-cypress
- [ 4.082718] usbcore: registered new interface driver ums-datafab
- [ 4.083301] usbcore: registered new interface driver ums_eneub6250
- [ 4.083898] usbcore: registered new interface driver ums-freecom
- [ 4.084482] usbcore: registered new interface driver ums-isd200
- [ 4.085056] usbcore: registered new interface driver ums-jumpshot
- [ 4.085646] usbcore: registered new interface driver ums-karma
- [ 4.086219] usbcore: registered new interface driver ums-onetouch
- [ 4.086830] usbcore: registered new interface driver ums-realtek
- [ 4.087415] usbcore: registered new interface driver ums-sddr09
- [ 4.088021] usbcore: registered new interface driver ums-sddr55
- [ 4.088599] usbcore: registered new interface driver ums-usbat
- [ 4.089237] usbcore: registered new interface driver usbserial_generic
- [ 4.089853] usbserial: USB Serial support registered for generic
- [ 4.093251] mousedev: PS/2 mouse device common for all mice
- [ 4.095168] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/i2s0
- [ 4.095752] i2c i2c-1: Failed to create I2C device for /i2c@ff110000/i2s0
- [ 4.097837] rk808 0-001b: chip id: 0x0
- [ 4.101789] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 4.102363] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 4.102974] DCDC_REG1: supplied by vcc5v0_sys
- [ 4.104178] DCDC_REG2: supplied by vcc5v0_sys
- [ 4.105087] DCDC_REG3: supplied by vcc5v0_sys
- [ 4.105687] DCDC_REG4: supplied by vcc5v0_sys
- [ 4.106592] LDO_REG1: supplied by vcc5v0_sys
- [ 4.108176] LDO_REG2: supplied by vcc5v0_sys
- [ 4.109454] LDO_REG3: supplied by vcc5v0_sys
- [ 4.110871] LDO_REG4: supplied by vcc5v0_sys
- [ 4.112307] LDO_REG5: supplied by vcc5v0_sys
- [ 4.113586] LDO_REG6: supplied by vcc5v0_sys
- [ 4.115004] LDO_REG7: supplied by vcc5v0_sys
- [ 4.116310] LDO_REG8: supplied by vcc5v0_sys
- [ 4.117760] SWITCH_REG1: supplied by vcc3v3_sys
- [ 4.118386] SWITCH_REG2: supplied by vcc3v3_sys
- [ 4.122222] rk808-rtc rk808-rtc: registered as rtc0
- [ 4.123323] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 4.123953] fan53555-reg: supplied by vcc5v0_sys
- [ 4.125377] vcc1v8_s3: supplied by vcc_1v8
- [ 4.126489] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 4.127117] fan53555-reg: supplied by vcc5v0_sys
- [ 4.129742] typec_fusb302 4-0022: No cable types defined, using default cabls
- [ 4.130468] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
- [ 4.132812] random: fast init done
- [ 4.135659] device-mapper: uevent: version 1.0.3
- [ 4.136359] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-m
- [ 4.138451] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
- [ 4.143731] sdhci: Secure Digital Host Controller Interface driver
- [ 4.144277] sdhci: Copyright(c) Pierre Ossman
- [ 4.144947] Synopsys Designware Multimedia Card Interface Driver
- [ 4.146024] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
- [ 4.146671] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
- [ 4.147268] dwmmc_rockchip fe310000.mmc: Version ID is 270a
- [ 4.147843] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit o
- [ 4.148890] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
- [ 4.149432] mmc_host mmc0: card is non-removable.
- [ 4.162832] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.176526] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 4.177156] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 4.177753] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 4.178272] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit o
- [ 4.179185] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 4.192327] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.206367] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.207794] mmc2: CQHCI version 5.10
- [ 4.209379] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.211415] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.213487] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.216859] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.233625] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 4.235788] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.236775] hid: raw HID events driver (C) Jiri Kosina
- [ 4.237456] usbcore: registered new interface driver usbhid
- [ 4.237976] usbhid: USB HID core driver
- [ 4.238600] hantro-vpu ff650000.video-codec: Adding to iommu group 0
- [ 4.239679] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-0
- [ 4.240569] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-1
- [ 4.245495] Initializing XFRM netlink socket
- [ 4.246387] NET: Registered protocol family 10
- [ 4.277651] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.278240] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
- [ 4.279400] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
- [ 4.280002] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 4.281891] ata1.00: configured for UDMA/133
- [ 4.282882] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 P5
- [ 4.284863] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/9)
- [ 4.285560] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 4.286080] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.286167] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 4.286590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 4.296321] Segment Routing with IPv6
- [ 4.296734] mip6: Mobile IPv6
- [ 4.297008] NET: Registered protocol family 17
- [ 4.297659] Key type dns_resolver registered
- [ 4.298620] registered taskstats version 1
- [ 4.299108] zswap: loaded using pool lzo/zbud
- [ 4.299842] Key type ._fscrypt registered
- [ 4.300204] Key type .fscrypt registered
- [ 4.300555] Key type fscrypt-provisioning registered
- [ 4.301073] Key type big_key registered
- [ 4.323090] Key type encrypted registered
- [ 4.346712] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T10:38:40)
- [ 4.347511] of_cfs_init
- [ 4.347951] of_cfs_init: OK
- [ 4.348775] ALSA device list:
- [ 4.349121] No soundcards found.
- [ 4.349713] ttyS2 - failed to request DMA
- [ 4.427866] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 166
- [ 4.434684] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 4.574401] sda: sda1
- [ 4.577342] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.634537] random: crng init done
- [ 4.787679] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.794386] ata2.00: LPM support broken, forcing max_power
- [ 4.794999] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
- [ 4.795627] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32)
- [ 4.802415] ata2.00: LPM support broken, forcing max_power
- [ 4.803023] ata2.00: configured for UDMA/133
- [ 4.814252] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 P5
- [ 4.815600] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 4.815662] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/9)
- [ 4.816748] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 4.817248] sd 1:0:0:0: [sdb] Write Protect is off
- [ 4.817739] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doeA
- [ 5.117997] sdb: sdb1
- [ 5.120639] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 5.307678] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.347068] ata3.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
- [ 5.347683] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 5.486504] ata3.00: configured for UDMA/133
- [ 5.487652] scsi 2:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
- [ 5.489092] scsi 2:0:0:0: Attached scsi generic sg2 type 0
- [ 5.490087] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1)
- [ 5.490777] sd 2:0:0:0: [sdc] 4096-byte physical blocks
- [ 5.491276] sd 2:0:0:0: [sdc] Write Protect is off
- [ 5.491766] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doeA
- [ 5.549412] sdc: sdc1
- [ 5.552211] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 5.987676] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.989770] ata4.00: ATA-8: KINGSTON SS200S330G, S8FM05.1, max UDMA/133
- [ 5.990379] ata4.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 5.991500] ata4.00: configured for UDMA/133
- [ 5.992583] scsi 3:0:0:0: Direct-Access ATA KINGSTON SS200S3 05.1 P5
- [ 5.994379] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 5.994608] sd 3:0:0:0: [sdd] 58626288 512-byte logical blocks: (30.0 GB/28.)
- [ 5.995645] sd 3:0:0:0: [sdd] Write Protect is off
- [ 5.996183] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doeA
- [ 6.000354] sdd: sdd1 sdd2 sdd3 sdd4
- [ 6.003294] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 6.487678] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 7.252356] ata5.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
- [ 7.252935] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 7.304248] ata5.00: configured for UDMA/133
- [ 7.305461] scsi 4:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 P5
- [ 7.307252] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 7.308359] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1)
- [ 7.309061] sd 4:0:0:0: [sde] 4096-byte physical blocks
- [ 7.309583] sd 4:0:0:0: [sde] Write Protect is off
- [ 7.310121] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doeA
- [ 7.402942] sde: sde1 sde2 sde3 sde4
- [ 7.405685] sd 4:0:0:0: [sde] Attached SCSI disk
- [ 7.406772] Freeing unused kernel memory: 1216K
- [ 7.467753] Run /init as init process
- Loading, please wait...
- Starting version 241
- [ 7.764196] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 7.764789] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 7.765405] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 7.766033] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 7.766654] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 7.767160] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
- [ 7.767677] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 7.768386] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 7.769013] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 7.774609] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 7.776269] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 7.776925] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 7.777386] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 7.778067] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 7.778724] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 7.779181] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 7.779797] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 7.780557] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 7.781106] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 7.781618] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 7.797241] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 7.900252] libphy: stmmac: probed
- [ 7.900585] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 7.901682] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- [ 8.897986] EXT4-fs (sde4): mounted filesystem with writeback data mode. Opt)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 9.623076] systemd[1]: System time before build time, advancing clock.
- [ 9.678581] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SE)
- [ 9.682121] systemd[1]: Detected architecture arm64.
- Welcome to Debian GNU/Linux 10 (buster)!
- [ 9.796497] systemd[1]: Set hostname to <rockpro64>.
- [ 10.422840] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ 10.424845] systemd[1]: Reached target System Time Synchronized.
- [ OK ] Reached target System Time Synchronized.
- [ 10.448067] systemd[1]: Started Forward Password Requests to Wall Directory .
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ 10.478762] systemd[1]: Set up automount Arbitrary Executable File Formats F.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ 10.508468] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 10.537871] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ 10.573621] systemd[1]: Created slice system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- [ OK ] Created slice system-systemd\x2dfsck.slice.
- [ OK ] Reached target Swap.
- [ OK ] Listening on udev Control Socket.
- [ 10.797719] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGR
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket.
- Starting Journal Service...
- Mounting Huge Pages File System...
- Starting udev Coldplug all Devices...
- Mounting Kernel Debug File System...
- Mounting POSIX Message Queue File System...
- Starting Restore / save the current clock...
- Starting Load Kernel Modules...
- Starting Nameserver information manager...
- Starting Set the console keyboard layout...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Started Journal Service.
- [ 11.334032] EXT4-fs (sde4): re-mounted. Opts: (null)
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Nameserver information manager.
- Starting Helper to synchronize boot up for ifupdown...
- Starting Rebuild Hardware Database...
- Starting Create System Users...
- Starting Load/Save Random Seed...
- Mounting FUSE Control File System...
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ OK ] Started Create System Users.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Mounted Kernel Configuration File System.
- [ 12.064496] systemd-journald[503]: Received request to flush runtime journal1
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Started Rebuild Hardware Database.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Found device /dev/ttyS2.
- [ OK ] Found device KINGSTON_SS200S330G boot-efi.
- [ OK ] Found device KINGSTON_SS200S330G linux-boot.
- Starting File System Check…ev/disk/by-label/linux-boot...
- Starting File System Check…/dev/disk/by-label/boot-efi...
- [ OK ] Found device /sys/subsystem/net/devices/eth0.
- [ OK ] Started File System Check on /dev/disk/by-label/boot-efi.
- [ OK ] Started File System Check Daemon to report status.
- [ OK ] Started File System Check …/dev/disk/by-label/linux-boot.
- Mounting /boot...
- [ 13.676831] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts:)
- [ 13.677550] ext4 filesystem being mounted at /boot supports timestamps until)
- [ OK ] Mounted /boot.
- Mounting /boot/efi...
- [ OK ] Mounted /boot/efi.
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- [ OK ] Started ifup for eth0.
- Starting Raise network interfaces...
- Starting Create Volatile Files and Directories...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ 14.170315] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [)
- [ 14.172695] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features supportd
- [ 14.173369] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
- [ 14.173966] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii e
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily apt download activities.
- [ OK ] Reached target Basic System.
- [ OK ] Started D-Bus System Message Bus.
- Starting Rock 64 First boot...
- Starting Generate SSH keys if not there...
- Starting Network Manager...
- Starting WPA supplicant...
- Starting Start bluetooth on ttyS0...
- Starting Resets System Activity Data Collector...
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Login Service...
- Starting System Logging Service...
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Rock 64 First boot.
- [ OK ] Started Generate SSH keys if not there.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started System Logging Service.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started Login Service.
- [ OK ] Started WPA supplicant.
- [ 15.047736] rd 0-5: Disabling EAS, schedutil is mandatory
- [ OK ] Started Network Manager.
- Starting Hostname Service...
- [ OK ] Reached target Network.
- Starting Network Time Service...
- Starting OpenBSD Secure Shell server...
- Starting Permit User Sessions...
- [ OK ] Started Hostname Service.
- [ OK ] Started Permit User Sessions.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Serial Getty on ttyS2.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Network Time Service.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started OpenBSD Secure Shell server.
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [FAILED] Failed to start Start bluetooth on ttyS0.
- See 'systemctl status sdio-hciattach.service' for details.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 10 rockpro64 ttyS2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement