Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.18.31-gd5952e2e (claudio@claudio-XPS-8300) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Sep 5 21:12:59 UTC 2019
- [ 0.000000] CPU: AArch64 Processor [511f2112] revision 2
- [ 0.000000] alternatives: detected feature GIC system register CPU interface
- [ 0.000000] Powerup reason=0x80021
- [ 0.000000] Hw version=0x230
- [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8994 MTP
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 68 MiB
- [ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
- [ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
- [ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
- [ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8fe00000': base 0x000000008fe00000, size 43 MiB
- [ 0.000000] Reserved memory: reserved region for node 'modem_region@89c00000': base 0x0000000089c00000, size 98 MiB
- [ 0.000000] Reserved memory: reserved region for node 'ramoops_region@92900000': base 0x0000000092900000, size 1 MiB
- [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 68 MiB
- [ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
- [ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
- [ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
- [ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x000000008fe00000, size 43 MiB
- [ 0.000000] Reserved memory: initialized node peripheral_region@8fe00000, compatible id removed-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x0000000089c00000, size 98 MiB
- [ 0.000000] Reserved memory: initialized node modem_region@89c00000, compatible id removed-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x0000000092900000, size 1 MiB
- [ 0.000000] Reserved memory: initialized node ramoops_region@92900000, compatible id removed-dma-pool
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
- [ 0.000000] On node 0 totalpages: 727376
- [ 0.000000] DMA zone: 7352 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 470528 pages, LIFO batch:31
- [ 0.000000] Normal zone: 4014 pages used for memmap
- [ 0.000000] Normal zone: 256848 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc0be8c9000 s20352 r8192 d28800 u57344
- [ 0.000000] pcpu-alloc: s20352 r8192 d28800 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 716010
- [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 androidboot.hardware=qcom ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.selinux=permissive androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=eio androidboot.keymaster=1 androidboot.serialno=b651d4be androidboot.secureboot=1 androidboot.hwversion=2.3.0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_fhd_r63452_j1_cmd:1:none:cfg:single_dsi
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 2590640K/2909504K available (15064K kernel code, 2241K rwdata, 9512K rodata, 2128K init, 4076K bss, 318864K reserved)
- [ 0.000000] Virtual kernel memory layout:
- vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
- vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- 0xffffffbdc0000000 - 0xffffffbdc2fad400 ( 47 MB actual)
- PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
- fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
- modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- memory : 0xffffffc000000000 - 0xffffffc0beb50000 ( 3051 MB)
- .init : 0xffffffc001a00000 - 0xffffffc001c14000 ( 2128 KB)
- .text : 0xffffffc000080000 - 0xffffffc001a00000 ( 26112 KB)
- .data : 0xffffffc001c30000 - 0xffffffc001e60600 ( 2242 KB)
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
- [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
- [ 0.000000] MPM 1 irq mapping errored -517
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000018] Switched to clocksource arch_sys_counter
- [ 0.000889] Console: colour dummy device 80x25
- [ 0.001308] console [tty0] enabled
- [ 0.002383] allocated 12582912 bytes of page_cgroup
- [ 0.002391] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.002407] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
- [ 0.002421] pid_max: default: 32768 minimum: 301
- [ 0.002550] Security Framework initialized
- [ 0.002579] SELinux: Initializing.
- [ 0.002614] SELinux: Starting in permissive mode
- [ 0.002644] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.002655] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003130] Initializing cgroup subsys memory
- [ 0.003154] Initializing cgroup subsys devices
- [ 0.003167] Initializing cgroup subsys freezer
- [ 0.003179] Initializing cgroup subsys net_cls
- [ 0.003189] Initializing cgroup subsys blkio
- [ 0.003199] Initializing cgroup subsys bfqio
- [ 0.003210] Initializing cgroup subsys perf_event
- [ 0.003535] /cpus/cpu@0: Unknown CPU type
- [ 0.003550] /cpus/cpu@1: Unknown CPU type
- [ 0.003561] /cpus/cpu@100: Unknown CPU type
- [ 0.003573] /cpus/cpu@101: Unknown CPU type
- [ 0.003609] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
- [ 0.003640] EFI services will not be available.
- [ 0.003756] NOHZ: local_softirq_pending 02
- [ 0.012428] MSM Memory Dump base table set up
- [ 0.012463] MSM Memory Dump apps data table set up
- [ 0.012491] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
- [ 0.014179] clock-cpu-8996: configuring clocks for the perf cluster
- [ 0.014344] cpu_clock_8996_early_init: finished CPU clock configuration
- [ 0.016412] CPU1: found redistributor 1 region 0:0x0000000009c40000
- [ 0.018451] CPU2: found redistributor 100 region 0:0x0000000009c80000
- [ 0.020283] CPU3: found redistributor 101 region 0:0x0000000009cc0000
- [ 0.020401] Brought up 4 CPUs
- [ 0.020446] SMP: Total of 4 processors activated.
- [ 0.021314] devtmpfs: initialized
- [ 0.022719] DMI not present or invalid.
- [ 0.030062] pinctrl core: initialized pinctrl subsystem
- [ 0.030443] regulator-dummy: no parameters
- [ 0.091351] NET: Registered protocol family 16
- [ 0.096796] cpuidle: using governor ladder
- [ 0.113388] cpuidle: using governor menu
- [ 0.126724] cpuidle: using governor qcom
- [ 0.127262] vdso: 2 pages (1 code @ ffffffc001c35000, 1 data @ ffffffc001c34000)
- [ 0.127722] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
- [ 0.128440] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.141764] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
- [ 0.142864] sps:sps is ready.
- [ 0.143650] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
- [ 0.144596] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
- [ 0.145076] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
- [ 0.145579] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
- [ 0.146119] irq: no irq domain found for /soc/pinctrl@01010000 !
- [ 0.147858] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.214380] smd_channel_probe_now: allocation table not initialized
- [ 0.214704] smd_channel_probe_now: allocation table not initialized
- [ 0.214983] smd_channel_probe_now: allocation table not initialized
- [ 0.215272] smd_channel_probe_now: allocation table not initialized
- [ 0.215528] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
- [ 0.215780] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
- [ 0.216507] msm_rpm_dev_probe: APSS-RPM communication over GLINK
- [ 0.224687] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.226142] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
- [ 0.231063] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
- [ 0.231725] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8fe00000
- [ 0.232029] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8fe00000
- [ 0.232494] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8fe00000
- [ 0.232870] platform 2080000.qcom,mss: assigned reserved memory node modem_region@89c00000
- [ 0.235494] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.235530] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.235557] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.235579] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.235645] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- [ 0.235659] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.235675] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.235692] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.240644] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
- [ 0.244117] smd_channel_probe_now: allocation table not initialized
- [ 0.244305] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
- [ 0.244932] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
- [ 0.245036] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
- [ 0.245205] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
- [ 0.245477] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
- [ 0.247421] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
- [ 0.247781] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
- [ 0.248109] apcc_l3_mem_acc_corner: 0 <--> 0 mV
- [ 0.248441] gfx_mem_acc_corner: 0 <--> 0 mV
- [ 0.248840] kryo0-retention: 468 <--> 892 mV at 520 mV
- [ 0.249038] kryo0: 468 <--> 892 mV at 754 mV
- [ 0.249191] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
- [ 0.249496] kryo1-retention: 468 <--> 892 mV at 520 mV
- [ 0.249694] kryo1: 468 <--> 892 mV at 754 mV
- [ 0.249840] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
- [ 0.254496] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8fe00000
- [ 0.255825] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.274470] __of_mpm_init(): MPM driver mapping exists
- [ 0.275782] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
- [ 0.275933] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
- [ 0.275950] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
- [ 0.277614] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- [ 0.277750] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
- [ 0.277767] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
- [ 0.278037] msm-sn-fuse 74138.snfuse: SN interface initialized
- [ 0.279296] console [pstore-1] enabled
- [ 0.279539] pstore: Registered ramoops as persistent store backend
- [ 0.279556] ramoops: attached 0x100000@0x92900000, ecc: 0/0
- [ 0.280886] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- [ 0.280988] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
- [ 0.281007] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
- [ 0.281322] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- [ 0.281387] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
- [ 0.281404] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
- [ 0.281718] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- [ 0.281782] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
- [ 0.281799] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
- [ 0.282077] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- [ 0.282140] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
- [ 0.282157] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
- [ 0.282324] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.283049] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.283515] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.283905] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.284345] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.284727] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.285164] pm8994_s3: 1300 mV normal idle
- [ 0.285600] pm8994_s4: 1800 mV normal idle
- [ 0.286025] pm8994_s5: 2150 mV normal idle
- [ 0.286451] pm8994_s7: 800 mV normal idle
- [ 0.286898] pm8994_l1: 1000 mV normal idle
- [ 0.287338] pm8994_l2: 1250 mV normal idle
- [ 0.287986] pm8994_l3: 850 <--> 1300 mV at 1300 mV normal idle
- [ 0.288412] pm8994_l4: 1225 mV normal idle
- [ 0.288842] pm8994_l6: 1800 mV normal idle
- [ 0.289266] pm8994_l8: 1800 mV normal idle
- [ 0.289677] pm8994_l9: 1800 mV normal idle
- [ 0.290134] pm8994_l10: 1800 mV normal idle
- [ 0.290556] pm8994_l11: 1150 mV normal idle
- [ 0.290992] pm8994_l12: 1800 mV normal idle
- [ 0.291641] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.292070] pm8994_l14: 1800 mV normal idle
- [ 0.292693] pm8994_l15: 1800 mV normal idle
- [ 0.293115] pm8994_l16: 2700 mV normal idle
- [ 0.293575] pm8994_l17: 2500 mV normal idle
- [ 0.293991] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
- [ 0.294372] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
- [ 0.294788] pm8994_l19: 3000 mV normal idle
- [ 0.295216] pm8994_l20: 2950 mV normal idle
- [ 0.295637] pm8994_l21: 2950 mV normal idle
- [ 0.296063] pm8994_l22: 2950 <--> 3500 mV at 3000 mV normal idle
- [ 0.296487] pm8994_l23: 2800 mV normal idle
- [ 0.296935] pm8994_l24: 3075 mV normal idle
- [ 0.297359] pm8994_l25: 1200 mV normal idle
- [ 0.298046] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.298424] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.298849] pm8994_l27: 1200 mV normal idle
- [ 0.299275] pm8994_l28: 925 mV normal idle
- [ 0.299918] pm8994_l29: 2800 mV normal idle
- [ 0.300383] pm8994_l30: 1800 mV normal idle
- [ 0.300802] pm8994_l32: 1800 mV normal idle
- [ 0.301229] pm8994_lvs1: no parameters
- [ 0.301613] pm8994_lvs2: no parameters
- [ 0.302002] pmi8994_s1: 1025 mV normal idle
- [ 0.302423] pmi8994_boost_5v: no parameters
- [ 0.302535] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- [ 0.302644] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- [ 0.302939] pmi8994_boost_pin_ctrl: no parameters
- [ 0.302997] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- [ 0.303094] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- [ 0.303465] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
- [ 0.303807] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
- [ 0.304042] pm8994_s11_avs_limit: 470 <--> 1140 mV
- [ 0.304162] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
- [ 0.304920] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.304953] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.304973] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.304994] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.305018] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.305365] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- [ 0.305385] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.305403] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.305423] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.305884] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.306490] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
- [ 0.306575] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
- [ 0.306594] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
- [ 0.307079] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- [ 0.307152] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
- [ 0.307169] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
- [ 0.307529] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- [ 0.307594] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
- [ 0.307611] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
- [ 0.307904] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- [ 0.307967] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
- [ 0.307983] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
- [ 0.308295] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- [ 0.308359] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
- [ 0.308375] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
- [ 0.308648] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- [ 0.308711] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
- [ 0.308728] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
- [ 0.308992] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.327669] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
- [ 0.328742] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
- [ 0.328766] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
- [ 0.328784] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
- [ 0.329017] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
- [ 0.329040] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
- [ 0.329057] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
- [ 0.329320] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
- [ 0.329339] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
- [ 0.329353] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
- [ 0.338798] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
- [ 0.340686] pmi8994_boost_5v: no parameters
- [ 0.340799] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- [ 0.340909] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- [ 0.341121] pmi8994_boost_pin_ctrl: no parameters
- [ 0.341180] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- [ 0.341276] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- [ 0.341987] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.342020] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.342040] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.342063] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.342086] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.342296] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- [ 0.342314] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.342332] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.342352] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.342886] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 1
- [ 0.342905] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
- [ 0.342921] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
- [ 0.342937] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
- [ 0.342953] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
- [ 0.342971] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.343180] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- [ 0.343464] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 595000 uV
- [ 0.343485] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
- [ 0.343502] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 805000 uV
- [ 0.343518] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 840000 uV
- [ 0.343607] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 322
- [ 0.343624] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 482, quot_offset[ 7]= 120
- [ 0.343642] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 727, quot_offset[ 7]= 245
- [ 0.343659] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 785, quot_offset[ 7]= 55
- [ 0.343788] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 1
- [ 0.343803] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
- [ 0.343819] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
- [ 0.343834] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
- [ 0.343849] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
- [ 0.343867] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.343992] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 595000 uV
- [ 0.344010] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV
- [ 0.344026] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 805000 uV
- [ 0.344042] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 840000 uV
- [ 0.344090] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 322
- [ 0.344107] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 482, quot_offset[ 7]= 120
- [ 0.344124] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 727, quot_offset[ 7]= 245
- [ 0.344141] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 785, quot_offset[ 7]= 55
- [ 0.344248] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 1
- [ 0.344263] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
- [ 0.344279] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
- [ 0.344295] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
- [ 0.344309] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
- [ 0.344328] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.344559] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- [ 0.344759] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
- [ 0.344778] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
- [ 0.344794] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 735000 uV
- [ 0.344810] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 900000 uV
- [ 0.344915] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 317
- [ 0.344933] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 436, quot_offset[ 7]= 75
- [ 0.344950] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 578, quot_offset[ 7]= 140
- [ 0.344967] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]= 889, quot_offset[ 7]= 310
- [ 0.345384] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
- [ 0.345538] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
- [ 0.345764] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
- [ 0.349061] cpr3_regulator_measure_aging: apcc: average quotient delta=0 (count=10)
- [ 0.349094] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1250 uV
- [ 0.349599] apc1_corner: 0 <--> 0 mV at 0 mV
- [ 0.351252] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
- [ 0.351279] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
- [ 0.351545] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 650000 uV
- [ 0.351567] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 705000 uV
- [ 0.351583] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 815000 uV
- [ 0.351598] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
- [ 0.351775] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
- [ 0.351917] gfx_corner: 0 <--> 0 mV at 0 mV
- [ 0.353427] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
- [ 0.353540] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.353561] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.356582] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
- [ 0.356730] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.356752] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.357617] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
- [ 0.357715] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.357735] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.359247] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- [ 0.359348] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.359369] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.360405] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- [ 0.360498] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.360519] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.361803] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- [ 0.361938] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.361960] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.363692] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
- [ 0.365691] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu0
- [ 0.365742] clock-cpu-8996: set OPP pair (1363200000 Hz, 820000 uv) on cpu0
- [ 0.365766] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu1
- [ 0.365804] clock-cpu-8996: set OPP pair (1363200000 Hz, 820000 uv) on cpu1
- [ 0.365827] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
- [ 0.365878] clock-cpu-8996: set OPP pair (1804800000 Hz, 890000 uv) on cpu2
- [ 0.365901] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
- [ 0.365950] clock-cpu-8996: set OPP pair (1804800000 Hz, 890000 uv) on cpu3
- [ 0.366100] clock-cpu-8996: set OPP pair (307200000 Hz, 640000 uv) on soc:qcom,m4m
- [ 0.366143] clock-cpu-8996: set OPP pair (1305600000 Hz, 815000 uv) on soc:qcom,m4m
- [ 0.366658] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
- [ 0.367238] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 580000 uV) on b00000.qcom,kgsl-3d0
- [ 0.367298] gfx3d_clk_src_v2: set OPP pair(510000000 Hz: 815000 uV) on b00000.qcom,kgsl-3d0
- [ 0.368846] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
- [ 0.369121] pmi8994_boost_5v: no parameters
- [ 0.369249] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- [ 0.369363] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- [ 0.369606] pmi8994_boost_pin_ctrl: no parameters
- [ 0.369706] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- [ 0.369810] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- [ 0.370714] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.370755] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.370775] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.370796] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.370820] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.371200] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- [ 0.371224] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.371241] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.371270] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- [ 0.372351] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- [ 0.372380] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.372398] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.372657] pmi8994_boost_5v: no parameters
- [ 0.372802] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- [ 0.372916] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- [ 0.373160] pmi8994_boost_pin_ctrl: no parameters
- [ 0.373257] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- [ 0.373401] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- [ 0.405629] KPI: Bootloader start count = 34084
- [ 0.405656] KPI: Bootloader end count = 401238
- [ 0.405668] KPI: Bootloader display count = 51980
- [ 0.405679] KPI: Bootloader load kernel count = 1809
- [ 0.405693] KPI: Kernel MPM timestamp = 421980
- [ 0.405704] KPI: Kernel MPM Clock frequency = 32768
- [ 0.405731] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
- accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3091929538 num_pmics=2
- [ 0.406012] gdsc_mmagic_bimc: no parameters
- [ 0.406913] usb_otg_vreg: no parameters
- [ 0.406990] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
- [ 0.407102] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
- [ 0.407282] rome_vreg: no parameters
- [ 0.407560] wlan_en_vreg: no parameters
- [ 0.408216] disp_vddts_vreg: no parameters
- [ 0.412646] disp_vddr_vreg: no parameters
- [ 0.413236] vgaarb: loaded
- [ 0.414895] SCSI subsystem initialized
- [ 0.415955] usbcore: registered new interface driver usbfs
- [ 0.416018] usbcore: registered new interface driver hub
- [ 0.416206] usbcore: registered new device driver usb
- [ 0.416631] soc:usb_nop_phy supply vcc not found, using dummy regulator
- [ 0.417413] media: Linux media interface: v0.10
- [ 0.417475] Linux video capture interface: v2.00
- [ 0.420384] cpufreq: driver msm up and running
- [ 0.421041] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
- [ 0.421263] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
- [ 0.421448] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
- [ 0.421884] ION heap system created
- [ 0.422011] ION heap adsp created at 0x00000000ff800000 with size 400000
- [ 0.422031] ION heap qsecom created at 0x00000000fe400000 with size 1400000
- [ 0.422043] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
- [ 0.422055] ION heap secure_heap created
- [ 0.422887] msm_bus_fabric_init_driver
- [ 0.426468] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
- [ 0.426489] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
- [ 0.429744] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
- [ 0.430325] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
- [ 0.436950] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.436970] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.436985] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.437119] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437147] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437173] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437199] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437224] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437249] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.437274] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.438794] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 0.438820] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.439007] input: qpnp_pon as /devices/virtual/input/input0
- [ 0.439907] pon_spare_reg: no parameters
- [ 0.439968] qcom,qpnp-power-on qpnp-power-on-16: No PON config. specified
- [ 0.440061] qcom,qpnp-power-on qpnp-power-on-16: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
- [ 0.440082] qcom,qpnp-power-on qpnp-power-on-16: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.440269] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
- [ 0.440364] PMIC@SID2: PMI8994 v2.0.4 options: 0, 0, 0, 0
- [ 0.441671] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.441689] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
- [ 0.441696] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 0.443700] sps:BAM 0x0000000000684000 is registered.
- [ 0.444426] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.444647] sps:BAM 0x0000000000684000 (va:0xffffff8001540000) enabled: ver:0x27, number of pipes:20
- [ 0.446134] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.451927] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.454007] IPA driver initialization was successful.
- [ 0.455319] gdsc_mmagic_video: no parameters
- [ 0.455573] gdsc_mmagic_mdss: no parameters
- [ 0.455757] gdsc_mmagic_camss: no parameters
- [ 0.456026] gdsc_venus: no parameters
- [ 0.456052] gdsc_venus: supplied by gdsc_mmagic_video
- [ 0.456246] gdsc_venus_core0: fast normal
- [ 0.456441] gdsc_venus_core1: fast normal
- [ 0.456645] gdsc_camss_top: no parameters
- [ 0.456667] gdsc_camss_top: supplied by gdsc_mmagic_camss
- [ 0.456995] gdsc_vfe0: no parameters
- [ 0.457017] gdsc_vfe0: supplied by gdsc_camss_top
- [ 0.457197] gdsc_vfe1: no parameters
- [ 0.457217] gdsc_vfe1: supplied by gdsc_camss_top
- [ 0.457426] gdsc_mdss: no parameters
- [ 0.457448] gdsc_mdss: supplied by gdsc_mmagic_mdss
- [ 0.457776] gdsc_jpeg: no parameters
- [ 0.457798] gdsc_jpeg: supplied by gdsc_camss_top
- [ 0.457984] gdsc_cpp: no parameters
- [ 0.458009] gdsc_cpp: supplied by gdsc_camss_top
- [ 0.458203] gdsc_pcie_0: no parameters
- [ 0.458384] gdsc_pcie_1: no parameters
- [ 0.458538] gdsc_pcie_2: no parameters
- [ 0.458698] gdsc_usb30: no parameters
- [ 0.458878] gdsc_ufs: no parameters
- [ 0.459094] gdsc_fd: no parameters
- [ 0.459115] gdsc_fd: supplied by gdsc_camss_top
- [ 0.459310] gdsc_gpu: no parameters
- [ 0.459498] gdsc_gpu_gx: no parameters
- [ 0.459865] gdsc_gpu_gx: supplied by gfx_corner
- [ 0.460204] gdsc_hlos1_vote_aggre0_noc: no parameters
- [ 0.460394] gdsc_hlos1_vote_lpass_adsp: no parameters
- [ 0.460548] gdsc_hlos1_vote_lpass_core: no parameters
- [ 0.460714] gdsc_aggre0_noc: no parameters
- [ 0.463040] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.463069] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
- [ 0.465560] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
- [ 0.609472] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.610502] Bluetooth: ffffffc0baca3d20
- [ 0.610557] NET: Registered protocol family 31
- [ 0.610574] Bluetooth: ffffffc0baca3d20
- [ 0.610591] Bluetooth: ffffffc0baca3d00
- [ 0.610606] Bluetooth: ffffffc0baca3cd0
- [ 0.610637] Bluetooth: ffffffc0baca3ce0
- [ 0.611140] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.611175] cfg80211: World regulatory domain updated:
- [ 0.611185] cfg80211: DFS Master region: unset
- [ 0.611195] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 0.611214] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611235] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611245] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611255] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611265] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611275] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.611286] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 0.611514] nfc: nfc_init: NFC Core ver 0.1
- [ 0.611569] NET: Registered protocol family 39
- [ 0.611603] pcie:pcie_init.
- [ 0.615008] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
- [ 0.618159] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
- [ 0.619633] 608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
- [ 0.622507] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
- [ 0.624107] 610000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
- [ 0.628063] msm_pcie_get_resources: PCIe: RC2 can't get tcsr resource.
- [ 0.630960] pmi8994_boost_5v: no parameters
- [ 0.631261] pmi8994_boost_5v: supplied by pon_spare_reg
- [ 0.631745] pmi8994_boost_pin_ctrl: no parameters
- [ 0.631905] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
- [ 0.632475] ibb_reg: 4600 <--> 6000 mV at 5500 mV
- [ 0.632811] lab_reg: 4600 <--> 6000 mV at 5500 mV
- [ 0.633659] usb_otg_vreg: no parameters
- [ 0.633849] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
- [ 0.633990] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
- [ 0.634560] Switched to clocksource arch_sys_counter
- [ 0.676862] bcl_peripheral:bcl_perph_init BCL Initialized
- [ 0.682250] NET: Registered protocol family 2
- [ 0.683016] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.683130] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.683640] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.683799] TCP: reno registered
- [ 0.683821] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.683853] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.684254] NET: Registered protocol family 1
- [ 0.684326] PCI: CLS 0 bytes, default 64
- [ 0.685426] usb_otg_vreg: no parameters
- [ 0.685596] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
- [ 0.685740] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
- [ 0.686255] Trying to unpack rootfs image as initramfs...
- [ 0.704740] Freeing initrd memory: 820K (ffffffc002a00000 - ffffffc002acd000)
- [ 0.706491] kryo perfevents: CPU pmu for kryo-pmuv3 detected
- [ 0.712749] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.712857] Initialise system trusted keyring
- [ 0.713050] audit: initializing netlink subsys (disabled)
- [ 0.713162] audit: type=2000 audit(0.710:1): initialized
- [ 0.713826] vmscan: error setting kswapd cpu affinity mask
- [ 0.720958] Registering sdcardfs 0.1
- [ 0.721973] fuse init (API version 7.23)
- [ 0.722445] msgmni has been set to 5357
- [ 0.722513] SELinux: Registering netfilter hooks
- [ 0.725055] Key type asymmetric registered
- [ 0.725082] Asymmetric key parser 'x509' registered
- [ 0.725095] Key type pkcs7_test registered
- [ 0.725296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.725319] io scheduler noop registered
- [ 0.725332] io scheduler deadline registered
- [ 0.725420] io scheduler cfq registered (default)
- [ 0.725505] io scheduler bfq registered
- [ 0.725515] BFQ I/O-scheduler: v7r8
- [ 0.736989] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- [ 0.738460] No change in context(0==0), skip
- [ 0.739565] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
- [ 0.739576] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
- [ 0.739586] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
- [ 0.739595] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
- [ 0.739623] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
- [ 0.739633] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
- [ 0.739642] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
- [ 0.739651] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
- [ 0.739671] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
- [ 0.739681] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
- [ 0.739701] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
- [ 0.739710] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
- [ 0.739725] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- [ 0.739818] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 0.740250] xlog_status: enable:0, panic:0, dump:0
- [ 0.740479] OF: no ranges; cannot translate
- [ 0.740497] OF: no ranges; cannot translate
- [ 0.741154] OF: no ranges; cannot translate
- [ 0.741167] OF: no ranges; cannot translate
- [ 0.741315] OF: no ranges; cannot translate
- [ 0.741329] OF: no ranges; cannot translate
- [ 0.741465] OF: no ranges; cannot translate
- [ 0.741477] OF: no ranges; cannot translate
- [ 0.741674] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
- [ 0.747419] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
- [ 0.747614] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
- [ 0.747759] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
- [ 0.747907] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
- [ 0.750929] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.751240] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_jdi_fhd_r63452_j1_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_jdi_fhd_r63452_j1_cmd
- [ 0.751681] mdss_dsi_panel_init: Panel Name = jdi j1 fhd cmd incell dsi panel
- [ 0.751783] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_jdi_fhd_r63452_j1_cmd" (ffffffc0762b2400)
- [ 0.751812] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.751823] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- [ 0.751833] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
- [ 0.751906] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-mcap-on-cmds
- [ 0.751917] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-mcap-off-cmds
- [ 0.751931] mdss_dsi_parse_panel_features: partial_update_enabled=0
- [ 0.751942] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.751952] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.751962] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- [ 0.752314] mdss_dsi_parse_ctrl_params:3902 Unable to read qcom,display-id, data=0000000000000000,len=20
- [ 0.752449] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- [ 0.752475] mdss_dsi_retrieve_ctrl_resources+0x164/0x234->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- [ 0.752487] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800187a000 ctrl_size=400 phy_base=ffffff800187c400 phy_size=588
- [ 0.752691] dsi_panel_device_register: Continuous splash enabled
- [ 0.753331] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
- [ 0.754521] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
- [ 0.755976] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.757261] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
- [ 0.759123] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
- [ 0.759837] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
- [ 0.760984] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
- [ 0.761146] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
- [ 0.761219] mdss_mdp_splash_parse_dt: splash mem child node is not present
- [ 0.777488] In memshare_probe, Memshare probe success
- [ 0.783511] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
- [ 0.784496] msm_rpm_log_probe: OK
- [ 0.788391] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
- [ 0.789493] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
- [ 0.792484] smd_channel_probe_now: allocation table not initialized
- [ 0.792588] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- [ 0.796088] uart_tx_gpio is not available
- [ 0.796118] uart_rx_gpio is not available
- [ 0.796126] uart_cts_gpio is not available
- [ 0.796133] uart_rfr_gpio is not available
- [ 0.797202] sps: BAM device 0x0000000007544000 is not registered yet.
- [ 0.797390] sps:BAM 0x0000000007544000 is registered.
- [ 0.799016] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART
- [ 0.801370] msm_serial_hs module loaded
- [ 0.823938] brd: module loaded
- [ 0.825598] loop: module loaded
- [ 0.825847] zram: Created 1 device(s) ...
- [ 0.825995] at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
- [ 0.827130] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
- [ 0.827182] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
- [ 0.827196] QSEECOM: qseecom_probe: no-clock-support=0x1
- [ 0.827207] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
- [ 0.827700] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
- [ 0.830825] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0xe (ok)
- [ 0.831052] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.843477] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.856764] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.870041] ti_tusb320 9-0067: ti_tusb320_i2c_read: I2C read over retry limit
- [ 0.870054] ti_tusb320 9-0067: The device is absent
- [ 0.870486] ti_tusb320 9-0047: 023BSUT,144,18
- [ 0.880428] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.893448] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.906770] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.920046] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
- [ 0.920120] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.933435] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.946767] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.960045] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
- [ 0.960119] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 0.973442] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 0.986770] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 1.000048] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
- [ 2.503527] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.516775] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.530103] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.543380] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
- [ 2.543396] pericom_30216c 9-001d: read:0,71,0,0
- [ 2.543470] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.556768] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.570103] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.583381] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
- [ 2.583454] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.596766] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.610100] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 2.623377] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
- [ 2.623449] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.636769] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.650101] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 2.663377] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
- [ 2.663394] typec: Typec dev has registered,failed to register driver pericom_30216c
- [ 2.663421] pericom_30216c: probe of 9-001d failed with error -22
- [ 2.665996] drv2604_probe, i2c status (0x84)
- [ 2.666030] drv2604 driver found: drv2604.
- [ 2.670694] dev_init_platform_data, LRA = 240, DriveTime=0xf
- [ 2.700334] drv2604 probe succeeded
- [ 2.700444] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 2.700453] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 2.700516] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 2.700524] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 2.700590] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 2.700598] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 2.702810] pn548_dev_init : start
- [ 2.705057] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
- [ 2.705086] qce 660000.qcedev: CE device = 0x0
- , IO base, CE = 0xffffff80042c0000
- , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- IO base BAM = 0x (null)
- BAM IRQ 243
- Engines Availability = 0x2011053
- [ 2.705311] sps:BAM 0x0000000000644000 is registered.
- [ 2.705524] sps:BAM 0x0000000000644000 (va:0xffffff80045c0000) enabled: ver:0x27, number of pipes:16
- [ 2.705774] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 243
- [ 2.713246] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
- [ 2.713279] qcrypto 660000.qcrypto: CE device = 0x0
- , IO base, CE = 0xffffff8006340000
- , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- IO base BAM = 0x (null)
- BAM IRQ 243
- Engines Availability = 0x2011053
- [ 2.713760] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 243
- [ 2.718599] qcrypto 660000.qcrypto: qcrypto-ecb-aes
- [ 2.718751] qcrypto 660000.qcrypto: qcrypto-cbc-aes
- [ 2.718855] qcrypto 660000.qcrypto: qcrypto-ctr-aes
- [ 2.718944] qcrypto 660000.qcrypto: qcrypto-ecb-des
- [ 2.719034] qcrypto 660000.qcrypto: qcrypto-cbc-des
- [ 2.719123] qcrypto 660000.qcrypto: qcrypto-ecb-3des
- [ 2.719211] qcrypto 660000.qcrypto: qcrypto-cbc-3des
- [ 2.719305] qcrypto 660000.qcrypto: qcrypto-xts-aes
- [ 2.719394] qcrypto 660000.qcrypto: qcrypto-sha1
- [ 2.719483] qcrypto 660000.qcrypto: qcrypto-sha256
- [ 2.719582] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 2.719672] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 2.719761] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 2.719853] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 2.719942] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 2.720077] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 2.720195] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
- [ 2.720293] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
- [ 2.720379] qcrypto 660000.qcrypto: qcrypto-aes-ccm
- [ 2.720467] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 2.723183] ICE IRQ = 27
- [ 2.723506] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
- [ 2.723573] ICE IRQ = 28
- [ 2.728329] qcom_ice_get_pdevice: found ice device ffffffc075a2a200
- [ 2.728359] qcom_ice_get_pdevice: matching platform device ffffffc0b9a72c00
- [ 2.728789] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
- [ 2.729451] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
- [ 2.729466] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
- [ 2.730529] scsi host0: ufshcd
- [ 2.734246] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002150000
- [ 2.741727] SCSI Media Changer driver v0.25
- [ 2.745466] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 2.746559] tun: Universal TUN/TAP device driver, 1.6
- [ 2.746570] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.746794] PPP generic driver version 2.4.2
- [ 2.746921] PPP BSD Compression module registered
- [ 2.746933] PPP Deflate Compression module registered
- [ 2.746980] PPP MPPE Compression module registered
- [ 2.746994] NET: Registered protocol family 24
- [ 2.759238] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 2.836118] PCI host bridge /soc/qcom,pcie@00600000 ranges:
- [ 2.836160] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
- [ 2.836196] IO 0x0c200000..0x0c2fffff -> 0x0c200000
- [ 2.836214] MEM 0x0c300000..0x0cffffff -> 0x0c300000
- [ 2.846421] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
- [ 2.846443] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.846457] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
- [ 2.846471] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
- [ 2.846560] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 2.846717] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
- [ 2.846737] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- [ 2.846806] pci 0000:00:00.0: IOMMU is currently not supported for PCI
- [ 2.846925] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 2.846977] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
- [ 2.847261] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.847543] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
- [ 2.847721] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
- [ 2.847740] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 2.847920] pci 0000:01:00.0: IOMMU is currently not supported for PCI
- [ 2.848130] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 2.848634] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 2.848759] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
- [ 2.848796] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
- [ 2.848811] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
- [ 2.848920] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
- [ 2.849198] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.849239] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
- [ 2.851051] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
- [ 2.878059] cnss: Platform driver probed successfully.
- [ 2.881067] usbcore: registered new interface driver asix
- [ 2.881198] usbcore: registered new interface driver ax88179_178a
- [ 2.881244] usbcore: registered new interface driver cdc_ether
- [ 2.881285] usbcore: registered new interface driver net1080
- [ 2.881324] usbcore: registered new interface driver cdc_subset
- [ 2.881363] usbcore: registered new interface driver zaurus
- [ 2.881764] usbcore: registered new interface driver cdc_ncm
- [ 2.882495] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 2.885758] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 2.891596] 7411000.qusb supply USB3_GDSC not found, using dummy regulator
- [ 2.892102] 7412000.qusb supply USB3_GDSC not found, using dummy regulator
- [ 2.896396] msm-dwc3 6a00000.ssusb: unable to get dbm device
- [ 2.900419] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.900472] ehci-pci: EHCI PCI platform driver
- [ 2.900616] usbcore: registered new interface driver usb-storage
- [ 2.900645] usbcore: registered new interface driver ums-alauda
- [ 2.900674] usbcore: registered new interface driver ums-cypress
- [ 2.900703] usbcore: registered new interface driver ums-datafab
- [ 2.900730] usbcore: registered new interface driver ums-freecom
- [ 2.900755] usbcore: registered new interface driver ums-isd200
- [ 2.900780] usbcore: registered new interface driver ums-jumpshot
- [ 2.900808] usbcore: registered new interface driver ums-karma
- [ 2.900833] usbcore: registered new interface driver ums-sddr09
- [ 2.900860] usbcore: registered new interface driver ums-sddr55
- [ 2.900885] usbcore: registered new interface driver ums-usbat
- [ 2.900979] usbcore: registered new interface driver usbserial
- [ 2.901008] usbcore: registered new interface driver usb_ehset_test
- [ 2.901813] gbridge_init: gbridge_init successs.
- [ 2.902082] mousedev: PS/2 mouse device common for all mice
- [ 2.902299] usbcore: registered new interface driver xpad
- [ 2.958058] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
- [ 2.958744] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.960016] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.961292] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.962640] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.963454] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.963954] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.964443] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.964932] scsi 0:0:0:4: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.965425] scsi 0:0:0:5: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 2.966411] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 2.967003] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 2.968226] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 2.968987] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 2.969223] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 2.970324] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 2.970557] sd 0:0:0:4: [sde] 16384-byte physical blocks
- [ 2.971139] sd 0:0:0:5: [sdf] 16384-byte physical blocks
- [ 2.971148] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 2.973281] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 2.974020] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14
- [ 2.974955] sd 0:0:0:4: [sde] 16384-byte physical blocks
- [ 2.975068] sd 0:0:0:5: [sdf] 16384-byte physical blocks
- [ 2.975152] sdb: sdb1
- [ 2.975758] sdc: sdc1
- [ 2.976333] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 2.977220] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 2.977317] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 2.978964] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
- [ 2.979120] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
- [ 2.979952] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40
- [ 2.980804] sd 0:0:0:5: [sdf] 16384-byte physical blocks
- [ 2.983060] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 2.984921] sd 0:0:0:4: [sde] 16384-byte physical blocks
- [ 3.134948] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x14 (ok)
- [ 3.148514] input: synaptics_dsx as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input1
- [ 3.156350] fpc1020 soc:fpc_fpc1020: fpc1020_tee_probe -
- [ 3.156630] fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 121
- [ 3.157876] fpc1020 soc:fpc_fpc1020: requested irq 472
- [ 3.158150] fpc1020 soc:fpc_fpc1020: fp-id-gpio - gpio: 1018
- [ 3.176474] fpc1020 soc:fpc_fpc1020: fpc vendor fp_id is 0 (0:low 1:high 2:float 3:unknown)
- [ 3.176494] fpc1020 soc:fpc_fpc1020: fpc1020_tee_probe: ok - end
- [ 3.177448] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
- [ 3.177746] i2c /dev entries driver
- [ 3.178724] lirc_dev: IR Remote Control driver registered, major 229
- [ 3.178750] IR NEC protocol handler initialized
- [ 3.178762] IR RC5(x/sz) protocol handler initialized
- [ 3.178773] IR RC6 protocol handler initialized
- [ 3.178785] IR JVC protocol handler initialized
- [ 3.178796] IR Sony protocol handler initialized
- [ 3.178807] IR SANYO protocol handler initialized
- [ 3.178818] IR Sharp protocol handler initialized
- [ 3.178830] IR LIRC bridge handler initialized
- [ 3.178841] IR XMP protocol handler initialized
- [ 3.216494] vmem: Up and running with 4 banks of memory from [io size 0x3f46bae0c9 disabled]
- [ 3.236086] msm_camera_pinctrl_init:1301 Getting pinctrl handle failed
- [ 3.236122] msm_actuator_platform_probe:2057 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
- [ 3.236330] qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
- [ 3.236373] msm_camera_pinctrl_init:1301 Getting pinctrl handle failed
- [ 3.236383] msm_actuator_platform_probe:2057 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
- [ 3.236484] qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@1 failed with error -22
- [ 3.238566] not config xiaomi,read-vendor-id rc -22
- [ 3.244651] msm_cci_init:1385: hw_version = 0x10040000
- [ 3.244745] qcom,slave-addr = 0xA0
- [ 3.334019] not config xiaomi,read-vendor-id rc -22
- [ 3.334694] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
- [ 3.417141] msm_cci_init:1385: hw_version = 0x10040000
- [ 3.474282] write the ov4688 reg when read the OTP, data = 0xd3
- [ 3.509658] write the ov4688 reg when read the OTP, data = 0xf3
- [ 3.512135] checksum sucessfull
- [ 3.592415] msm_camera_pinctrl_init:1301 Getting pinctrl handle failed
- [ 3.592463] msm_ois_platform_probe:999 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
- [ 3.592873] qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
- [ 3.610860] MSM-CPP cpp_init_hardware:869 CPP HW Version: 0x60000000
- [ 3.610904] MSM-CPP cpp_init_hardware:887 stream_cnt:0
- [ 3.625098] __msm_jpeg_init:1537] Jpeg Device id 0
- [ 3.626317] __msm_jpeg_init:1537] Jpeg Device id 2
- [ 3.627108] __msm_jpeg_init:1537] Jpeg Device id 3
- [ 3.632190] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
- [ 3.654303] sps: BAM device 0x0000000007584000 is not registered yet.
- [ 3.654599] sps:BAM 0x0000000007584000 is registered.
- [ 3.654905] sps:BAM 0x0000000007584000 (va:0xffffff8006940000) enabled: ver:0x19, number of pipes:24
- [ 3.670319] synaptics_dsx_i2c 12-0020: fwu_read_f34_guest_serialization_partition: Lockdown info: 0x31 0x31 0x32 0x31 0x41 0x32 0x31 0x0
- [ 3.671540] synaptics_dsx_i2c 12-0020: fwu_get_firmware_name: Choose firmware synaptics_jdi_incell.fw
- [ 3.671564] synaptics_dsx_i2c 12-0020: fwu_start_reflash: Start of reflash process
- [ 3.672240] synaptics_dsx_i2c 12-0020: fwu_go_nogo: Device firmware ID = 2535136
- [ 3.672257] synaptics_dsx_i2c 12-0020: fwu_go_nogo: Image firmware ID = 2535136
- [ 3.673655] synaptics_dsx_i2c 12-0020: fwu_go_nogo: No need to do reflash
- [ 3.730054] msm_fd aa4000.qcom,fd: Face detection halt timeout
- [ 3.731715] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
- [ 3.732443] ------------[ cut here ]------------
- [ 3.732467] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/xiaomi/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
- [ 3.732478] Unbalanced enable for IRQ 222
- [ 3.732485] Modules linked in:
- [ 3.732501] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.31-gd5952e2e #1
- [ 3.732510] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8994 MTP (DT)
- [ 3.732520] Call trace:
- [ 3.732537] [<ffffffc000207854>] dump_backtrace+0x0/0x270
- [ 3.732545] [<ffffffc000207ad8>] show_stack+0x14/0x1c
- [ 3.732560] [<ffffffc000e974a0>] dump_stack+0x88/0xac
- [ 3.732571] [<ffffffc000220d04>] warn_slowpath_common+0x8c/0xb0
- [ 3.732579] [<ffffffc000220d78>] warn_slowpath_fmt+0x50/0x58
- [ 3.732587] [<ffffffc000270f74>] __enable_irq+0x40/0x88
- [ 3.732595] [<ffffffc000271024>] enable_irq+0x68/0x78
- [ 3.732612] [<ffffffc0009be0ac>] fg_probe+0x17ac/0x27cc
- [ 3.732630] [<ffffffc000ab11c0>] spmi_drv_probe+0x14/0x1c
- [ 3.732644] [<ffffffc0006fa57c>] driver_probe_device+0x164/0x37c
- [ 3.732652] [<ffffffc0006fa844>] __driver_attach+0x64/0x90
- [ 3.732660] [<ffffffc0006f945c>] bus_for_each_dev+0x74/0x90
- [ 3.732667] [<ffffffc0006f9f08>] driver_attach+0x20/0x28
- [ 3.732674] [<ffffffc0006f9b70>] bus_add_driver+0x128/0x200
- [ 3.732683] [<ffffffc0006fb1d4>] driver_register+0x94/0xe0
- [ 3.732691] [<ffffffc000ab1678>] spmi_driver_register+0x5c/0x64
- [ 3.732699] [<ffffffc001a42828>] fg_init+0x18/0x20
- [ 3.732708] [<ffffffc000200a58>] do_one_initcall+0x1a0/0x1bc
- [ 3.732721] [<ffffffc001a00b60>] kernel_init_freeable+0x1c0/0x25c
- [ 3.732730] [<ffffffc000e9021c>] kernel_init+0x14/0xd8
- [ 3.732764] ---[ end trace f77fae08f08ed319 ]---
- [ 3.733526] FG: get_prop_capacity: loading batt profile, return last soc 0
- [ 3.733866] FG: get_prop_capacity: loading batt profile, return last soc 0
- [ 3.733970] FG: fg_probe: last soc 94
- [ 3.733982] FG: fg_probe: FG Probe success - FG Revision DIG:2.1 ANA:1.2 PMIC subtype=10
- [ 3.767177] device-mapper: uevent: version 1.0.3
- [ 3.767512] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
- [ 3.767679] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 3.767699] Bluetooth: ffffffc0baca3d30
- [ 3.767709] Bluetooth: ffffffc0baca3d10
- [ 3.767719] Bluetooth: ffffffc0baca3d10
- [ 3.769340] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
- [ 3.769499] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
- [ 3.769510] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
- [ 3.769519] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
- [ 3.770406] sdhci: Secure Digital Host Controller Interface driver
- [ 3.770420] sdhci: Copyright(c) Pierre Ossman
- [ 3.770430] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.799176] lp5562 9-0030: internal clock used
- [ 3.806088] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.806831] usbcore: registered new interface driver usbhid
- [ 3.806852] usbhid: USB HID core driver
- [ 3.807539] ashmem: initialized
- [ 3.807726] logger: created 256K log 'log_main'
- [ 3.807862] logger: created 256K log 'log_events'
- [ 3.808005] logger: created 256K log 'log_radio'
- [ 3.808137] logger: created 256K log 'log_system'
- [ 3.812883] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
- [ 3.820215] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 3.821691] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
- [ 3.821741] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
- [ 3.824284] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
- [ 3.827677] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
- [ 3.827822] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
- [ 3.827948] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
- [ 3.828077] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
- [ 3.829216] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
- [ 3.832339] usbcore: registered new interface driver snd-usb-audio
- [ 3.835717] tfa98xx_i2c_init(): TFA98XX driver version 2.9.0
- [ 3.835775] tfa98xx_i2c_probe(): tfa98xx_i2c_probe
- [ 3.836102] tfa98xx_i2c_probe(): TFA9890 detected
- [ 3.836125] tfa98xx 9-0034: Skipping IRQ registration
- [ 3.836234] tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
- [ 3.848521] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
- [ 3.848840] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
- [ 3.848859] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849031] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
- [ 3.849048] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849220] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
- [ 3.849237] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849400] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
- [ 3.849416] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849447] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
- [ 3.849608] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
- [ 3.849625] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849789] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
- [ 3.849805] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.849970] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
- [ 3.849986] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.850201] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
- [ 3.850217] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.850246] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
- [ 3.850411] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
- [ 3.850427] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.850593] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
- [ 3.850609] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.850777] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
- [ 3.850793] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.850955] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
- [ 3.850971] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.851003] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
- [ 3.851164] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
- [ 3.851181] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.851344] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
- [ 3.851360] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.851524] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
- [ 3.851540] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.851703] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
- [ 3.851721] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 3.864702] GACT probability NOT on
- [ 3.864727] Mirror/redirect action on
- [ 3.864750] u32 classifier
- [ 3.864755] Actions configured
- [ 3.864776] Netfilter messages via NETLINK v0.30.
- [ 3.864789] nfnl_acct: registering with nfnetlink.
- [ 3.864821] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.865041] ctnetlink v0.93: registering with nfnetlink.
- [ 3.865498] xt_time: kernel timezone is -0000
- [ 3.865674] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.865774] arp_tables: (C) 2002 David S. Miller
- [ 3.865810] TCP: cubic registered
- [ 3.865825] Initializing XFRM netlink socket
- [ 3.866162] NET: Registered protocol family 10
- [ 3.866721] mip6: Mobile IPv6
- [ 3.866744] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.866854] sit: IPv6 over IPv4 tunneling driver
- [ 3.867132] NET: Registered protocol family 17
- [ 3.867153] NET: Registered protocol family 15
- [ 3.867184] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 3.867197] Ebtables v2.0 registered
- [ 3.867384] Bluetooth: ffffffc0baca3ce0
- [ 3.867395] Bluetooth: ffffffc0baca3cd0
- [ 3.867423] Bluetooth: ffffffc0baca3d10
- [ 3.867434] Bluetooth: ffffffc0baca3cf0
- [ 3.867441] Bluetooth: ffffffc0baca3cf0
- [ 3.867448] Bluetooth: ffffffc0baca3cd0
- [ 3.867457] Bluetooth: ffffffc0baca3d40
- [ 3.867463] Bluetooth: ffffffc0baca3d20
- [ 3.867490] l2tp_core: L2TP core driver, V2.0
- [ 3.867505] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.867513] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 3.867534] l2tp_netlink: L2TP netlink interface
- [ 3.867557] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 3.867566] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 3.867582] 8021q: 802.1Q VLAN Support v1.8
- [ 3.868586] NET: Registered protocol family 27
- [ 3.870748] usb_otg_vreg: no parameters
- [ 3.870805] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
- [ 3.870866] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
- [ 3.873033] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
- [ 3.874239] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
- [ 3.876533] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- [ 3.877562] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
- [ 3.881208] sps:BAM 0x0000000006b04000 is registered.
- [ 3.883078] qpnp-smbcharger qpnp-smbcharger-21: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- [ 3.883228] smbcharger_charger_otg: no parameters
- [ 3.883335] smbcharger_external_otg: no parameters
- [ 3.883382] smbcharger_external_otg: supplied by pmi8994_boost_5v
- [ 3.884170] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.884701] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.884819] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.884973] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.906867] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.907112] synaptics_dsx_i2c 12-0020: fwu_read_f34_guest_serialization_partition: Lockdown info: 0x31 0x31 0x32 0x31 0x41 0x32 0x31 0x0
- [ 3.908207] fwu_start_reflash: End of reflash process
- [ 3.908422] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x24 (ok)
- [ 3.911472] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.912237] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.914750] qpnp-smbcharger qpnp-smbcharger-21: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- [ 3.946081] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
- [ 3.946103] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
- [ 3.947610] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.948160] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.948329] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.948414] qpnp-smbcharger qpnp-smbcharger-21: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:1.1 batt=1 dc=0 usb=1
- [ 3.949294] usb_otg_vreg: no parameters
- [ 3.949348] usb_otg_vreg: supplied by smbcharger_external_otg
- [ 3.950484] Registered cp15_barrier emulation handler
- [ 3.950503] Registered setend emulation handler
- [ 3.950893] Loading compiled-in X.509 certificates
- [ 3.950919] registered taskstats version 1
- [ 3.951919] Key type encrypted registered
- [ 3.954620] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
- [ 3.954739] adsprpc: channel link type: 0
- [ 3.964295] RNDIS_IPA module is loaded.
- [ 3.964829] file system registered
- [ 3.964873] mbim_init: initialize 1 instances
- [ 3.965005] mbim_init: Initialized 1 ports
- [ 3.966142] rndis_qc_init: initialize rndis QC instance
- [ 3.966313] Number of LUNs=8
- [ 3.966325] Mass Storage Function, version: 2009/09/11
- [ 3.966333] LUN: removable file: (no medium)
- [ 3.966350] Number of LUNs=1
- [ 3.966384] LUN: removable file: (no medium)
- [ 3.966390] Number of LUNs=1
- [ 3.966584] android_usb gadget: android_usb ready
- [ 3.968479] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
- [ 3.969569] atmel_mxt_ts 12-004a: ATMEL DEVICE TREE:
- [ 3.969582] atmel_mxt_ts 12-004a: reset gpio= 89
- [ 3.969589] atmel_mxt_ts 12-004a: irq gpio= 125
- [ 3.969595] atmel_mxt_ts 12-004a: fw name = mXT641T30AC.fw
- [ 3.969602] atmel_mxt_ts 12-004a: config size = 5
- [ 3.969608] atmel_mxt_ts 12-004a: gpio mask = 0xc
- [ 3.969614] atmel_mxt_ts 12-004a: default config = 0
- [ 3.969620] atmel_mxt_ts 12-004a: default panel id = 49
- [ 3.969626] atmel_mxt_ts 12-004a: use ptc key = 0
- [ 3.969633] atmel_mxt_ts 12-004a: cut off power = 0
- [ 3.969639] atmel_mxt_ts 12-004a: config[0]: family_id = 0xa4
- [ 3.969646] atmel_mxt_ts 12-004a: config[0]: variant_id = 0x2f
- [ 3.969652] atmel_mxt_ts 12-004a: config[0]: version = 0x30
- [ 3.969659] atmel_mxt_ts 12-004a: config[0]: build = 0xac
- [ 3.969665] atmel_mxt_ts 12-004a: config[0]: mxt_cfg_name = mxt_641t_sharp_config.fw
- [ 3.969673] atmel_mxt_ts 12-004a: config[0]: vendor_id = 0xc
- [ 3.969679] atmel_mxt_ts 12-004a: config[0]: panel_id = 0x38
- [ 3.969685] atmel_mxt_ts 12-004a: config[0]: rev_id = 0x32
- [ 3.969692] atmel_mxt_ts 12-004a: config[0]: wakeup self adcx = 0x10
- [ 3.969699] atmel_mxt_ts 12-004a: config[1]: family_id = 0xa4
- [ 3.969705] atmel_mxt_ts 12-004a: config[1]: variant_id = 0x2f
- [ 3.969712] atmel_mxt_ts 12-004a: config[1]: version = 0x30
- [ 3.969718] atmel_mxt_ts 12-004a: config[1]: build = 0xac
- [ 3.969724] atmel_mxt_ts 12-004a: config[1]: mxt_cfg_name = mxt_641t_sharp_config.fw
- [ 3.969732] atmel_mxt_ts 12-004a: config[1]: vendor_id = 0xc
- [ 3.969738] atmel_mxt_ts 12-004a: config[1]: panel_id = 0x31
- [ 3.969744] atmel_mxt_ts 12-004a: config[1]: rev_id = 0x32
- [ 3.969751] atmel_mxt_ts 12-004a: config[1]: wakeup self adcx = 0x10
- [ 3.969757] atmel_mxt_ts 12-004a: config[2]: family_id = 0xa4
- [ 3.969764] atmel_mxt_ts 12-004a: config[2]: variant_id = 0x2f
- [ 3.969771] atmel_mxt_ts 12-004a: config[2]: version = 0x30
- [ 3.969777] atmel_mxt_ts 12-004a: config[2]: build = 0xac
- [ 3.969783] atmel_mxt_ts 12-004a: config[2]: mxt_cfg_name = mxt_641t_sharp_config.fw
- [ 3.969791] atmel_mxt_ts 12-004a: config[2]: vendor_id = 0xc
- [ 3.969797] atmel_mxt_ts 12-004a: config[2]: panel_id = 0x51
- [ 3.969803] atmel_mxt_ts 12-004a: config[2]: rev_id = 0x32
- [ 3.969810] atmel_mxt_ts 12-004a: config[2]: wakeup self adcx = 0x10
- [ 3.969816] atmel_mxt_ts 12-004a: config[3]: family_id = 0xa4
- [ 3.969823] atmel_mxt_ts 12-004a: config[3]: variant_id = 0x2f
- [ 3.969829] atmel_mxt_ts 12-004a: config[3]: version = 0x30
- [ 3.969835] atmel_mxt_ts 12-004a: config[3]: build = 0xac
- [ 3.969842] atmel_mxt_ts 12-004a: config[3]: mxt_cfg_name = mxt_641t_sharp_config.fw
- [ 3.969849] atmel_mxt_ts 12-004a: config[3]: vendor_id = 0xc
- [ 3.969855] atmel_mxt_ts 12-004a: config[3]: panel_id = 0x52
- [ 3.969862] atmel_mxt_ts 12-004a: config[3]: rev_id = 0x32
- [ 3.969868] atmel_mxt_ts 12-004a: config[3]: wakeup self adcx = 0x10
- [ 3.969875] atmel_mxt_ts 12-004a: config[4]: family_id = 0xa4
- [ 3.969881] atmel_mxt_ts 12-004a: config[4]: variant_id = 0x2f
- [ 3.969887] atmel_mxt_ts 12-004a: config[4]: version = 0x30
- [ 3.969894] atmel_mxt_ts 12-004a: config[4]: build = 0xac
- [ 3.969900] atmel_mxt_ts 12-004a: config[4]: mxt_cfg_name = mxt_641t_sharp_config.fw
- [ 3.969907] atmel_mxt_ts 12-004a: config[4]: vendor_id = 0xc
- [ 3.969914] atmel_mxt_ts 12-004a: config[4]: panel_id = 0x32
- [ 3.969920] atmel_mxt_ts 12-004a: config[4]: rev_id = 0x32
- [ 3.969926] atmel_mxt_ts 12-004a: config[4]: wakeup self adcx = 0x10
- [ 3.969933] atmel_mxt_ts 12-004a: END OF ATMEL DEVICE TREE
- [ 3.970458] msm8996-pinctrl 1010000.pinctrl: pin GPIO_89 already requested by 12-0020; cannot claim for 12-004a
- [ 3.970472] msm8996-pinctrl 1010000.pinctrl: pin-89 (12-004a) status -22
- [ 3.970480] msm8996-pinctrl 1010000.pinctrl: could not request pin 89 (GPIO_89) from group gpio89 on device 1010000.pinctrl
- [ 3.970490] atmel_mxt_ts 12-004a: Error applying setting, reverse things back
- [ 3.970497] atmel_mxt_ts 12-004a: can not set pmx_ts_active pins
- [ 3.970504] atmel_mxt_ts 12-004a: pinctrl_select failed
- [ 3.970573] atmel_mxt_ts: probe of 12-004a failed with error -22
- [ 3.970673] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-18 20:43:15 UTC (1543395)
- [ 3.971314] pwm-ir soc:pwm_ir: reg-id = (null), low-active = 0, use-timer = 0
- [ 3.971461] Registered IR keymap rc-lirc
- [ 3.971594] input: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0/input3
- [ 3.971738] rc0: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0
- [ 3.971915] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0
- [ 3.974140] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 3.979582] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
- [ 3.979859] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
- [ 3.980009] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
- [ 3.980186] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
- [ 3.980336] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
- [ 3.980491] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
- [ 3.980639] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
- [ 3.980789] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
- [ 3.983088] parse_cpu_levels: idx 1 545
- [ 3.983105] parse_cpu_levels: idx 2 6022
- [ 3.983112] parse_cpu_levels: idx 2 11499
- [ 3.983161] parse_cpu_levels: idx 1 545
- [ 3.983167] parse_cpu_levels: idx 2 6022
- [ 3.983172] parse_cpu_levels: idx 2 11499
- [ 3.985450] qcom,qpnp-flash-led qpnp-flash-led-30: Unable to acquire pinctrl
- [ 3.987169] rmnet_ipa started initialization
- [ 3.987186] IPA SSR support = True
- [ 3.987191] IPA ipa-loaduC = True
- [ 3.987197] IPA SG support = True
- [ 3.989038] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 3.989053] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 3.989817] rmnet_ipa completed initialization
- [ 3.994264] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
- [ 3.997693] msm8996-asoc-snd soc:sound-9335: msm8996_init_pa_dev: PA dev node is not present
- [ 3.997710] msm8996-asoc-snd soc:sound-9335: msm8996_init_piezo_dev: PA dev node is not present
- [ 3.997857] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- [ 3.998480] usb_otg_vreg: disabling
- [ 3.998548] disp_vddr_vreg: disabling
- [ 3.998559] wlan_en_vreg: disabling
- [ 3.998565] rome_vreg: disabling
- [ 3.998571] gdsc_mmagic_bimc: disabling
- [ 3.998619] kryo1-retention: disabling
- [ 3.998625] kryo0-retention: disabling
- [ 3.998632] gfx_mem_acc_corner: disabling
- [ 3.998638] apcc_l3_mem_acc_corner: disabling
- [ 3.998644] apc1_perfcl_mem_acc_corner: disabling
- [ 3.998650] apc0_pwrcl_mem_acc_corner: disabling
- [ 3.998662] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
- [ 3.999015] clock_late_init: Removing enables held for handed-off clocks
- [ 4.003149] ALSA device list:
- [ 4.003159] No soundcards found.
- [ 4.003623] Freeing unused kernel memory: 2128K (ffffffc001a00000 - ffffffc001c14000)
- [ 4.003645] Freeing alternatives memory: 80K (ffffffc001c14000 - ffffffc001c28000)
- [ 5.856381] FG: get_esr_lvl: 80000,3400,3200,1
- [ 5.856399] FG: get_esr_lvl: 100000,3450,3100,1
- [ 5.856406] FG: get_esr_lvl: 150000,3550,3000,1
- [ 5.856411] FG: get_esr_lvl: 5000000,3550,3000,0
- [ 5.857203] FG: get_esr_lvl: 80000,3400,3200,1
- [ 6.339546] EXT4-fs (sda14): couldn't mount as ext3 due to feature incompatibilities
- [ 6.339809] EXT4-fs (sda14): couldn't mount as ext2 due to feature incompatibilities
- [ 6.341590] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.454767] enable_store: android_usb: already disabled
- [ 6.461101] dwc3 6a00000.dwc3: request ffffffc074d9de00 was not queued to ep0out
- [ 6.462500] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 6.462549] android_usb gadget: using random self ethernet address
- [ 6.462567] android_usb gadget: using random host ethernet address
- [ 6.463077] rndis0: MAC 5e:bc:f8:07:83:00
- [ 6.463093] rndis0: HOST MAC a6:09:bd:86:6a:c7
- [ 6.496584] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 6.508970] random: init-debug urandom read with 27 bits of entropy available
- [ 6.841252] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 6.845014] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 6.953237] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 6.955022] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- [ 6.955148] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- [ 6.955241] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 6.955508] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 6.956309] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 7.006733] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 7.309010] ------------[ cut here ]------------
- [ 7.309039] WARNING: CPU: 3 PID: 339 at ../../../../../../kernel/xiaomi/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
- [ 7.309050] Unbalanced enable for IRQ 221
- [ 7.309056] Modules linked in:
- [ 7.309068] CPU: 3 PID: 339 Comm: kworker/3:2 Tainted: G W 3.18.31-gd5952e2e #1
- [ 7.309077] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8994 MTP (DT)
- [ 7.309091] Workqueue: events esr_adjust_work
- [ 7.309100] Call trace:
- [ 7.309111] [<ffffffc000207854>] dump_backtrace+0x0/0x270
- [ 7.309120] [<ffffffc000207ad8>] show_stack+0x14/0x1c
- [ 7.309131] [<ffffffc000e974a0>] dump_stack+0x88/0xac
- [ 7.309140] [<ffffffc000220d04>] warn_slowpath_common+0x8c/0xb0
- [ 7.309148] [<ffffffc000220d78>] warn_slowpath_fmt+0x50/0x58
- [ 7.309156] [<ffffffc000270f74>] __enable_irq+0x40/0x88
- [ 7.309164] [<ffffffc000271024>] enable_irq+0x68/0x78
- [ 7.309172] [<ffffffc0009b4fc8>] esr_adjust_work+0x54/0x90
- [ 7.309181] [<ffffffc000236718>] process_one_work+0x25c/0x438
- [ 7.309189] [<ffffffc000237104>] worker_thread+0x324/0x440
- [ 7.309198] [<ffffffc00023b1c0>] kthread+0xe4/0xec
- [ 7.309205] ---[ end trace f77fae08f08ed31b ]---
- [ 7.550544] EXT4-fs (sda14): re-mounted. Opts: (null)
- [ 7.562843] preinit: (7.56) Welcome to Sailfish OS 3.1.0.12 (Seitseminen)
- [ 7.575594] preinit: (7.57) is_erase_needed: No : 0
- [ 7.598165] preinit: (7.59) get_bootstate: USER : 0
- [ 7.598636] preinit: (7.59) BOOTSTATE = USER
- [ 7.599841] preinit: (7.59) Booting to default.target
- [ 7.619267] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 7.619610] systemd[1]: Detected architecture arm64.
- [ 7.620428] systemd[1]: Set hostname to <Sailfish>.
- [ 7.634874] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 7.742945] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
- [ 7.754319] systemd[1]: data.mount: Unit is bound to inactive unit dev-sda14.device. Stopping, too.
- [ 7.755744] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
- [ 7.760102] systemd[1]: Reached target Swap.
- [ 7.760598] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 7.761304] systemd[1]: Created slice Root Slice.
- [ 7.761657] systemd[1]: Listening on Journal Socket.
- [ 7.761967] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 7.762204] systemd[1]: Listening on udev Control Socket.
- [ 7.762678] systemd[1]: Created slice User and Session Slice.
- [ 7.762864] systemd[1]: Reached target Encrypted Volumes.
- [ 7.763276] systemd[1]: Listening on Journal Audit Socket.
- [ 7.763541] systemd[1]: Reached target Login Prompts.
- [ 7.763746] systemd[1]: Listening on udev Kernel Socket.
- [ 7.764024] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 7.764521] systemd[1]: Created slice System Slice.
- [ 7.764857] systemd[1]: Reached target Slices.
- [ 7.766382] systemd[1]: Starting Setup Virtual Console...
- [ 7.769061] systemd[1]: Mounting Droid mount for /dev/bfqio...
- [ 7.771039] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 7.773634] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 7.776794] systemd[1]: Mounting Droid mount for /dev/cpuctl...
- [ 7.777491] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
- [ 7.779682] systemd[1]: Mounting Temporary Directory...
- [ 7.782061] systemd[1]: Mounting Droid mount for /dev/stune...
- [ 7.784718] systemd[1]: Mounting Debug File System...
- [ 7.787312] systemd[1]: Mounting Droid mount for /dev/cpuset...
- [ 7.789705] systemd[1]: Mounting FFS mount...
- [ 7.790329] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 7.792755] systemd[1]: Starting Journal Service...
- [ 7.794817] EXT4-fs (sda14): re-mounted. Opts: (null)
- [ 7.797362] cgroup: new mount options do not match the existing superblock, will be ignored
- [ 7.806274] systemd[1]: Mounted Debug File System.
- [ 7.807163] systemd[1]: Mounted Temporary Directory.
- [ 7.807457] systemd[1]: Mounted FFS mount.
- [ 7.807989] systemd[1]: Mounted Droid mount for /dev/cpuset.
- [ 7.808266] systemd[1]: Mounted Droid mount for /dev/bfqio.
- [ 7.811172] systemd[1]: Started Setup Virtual Console.
- [ 7.812244] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 7.812643] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
- [ 7.813058] systemd[1]: Failed to mount Droid mount for /dev/cpuctl.
- [ 7.813434] systemd[1]: dev-cpuctl.mount: Unit entered failed state.
- [ 7.813736] systemd[1]: dev-stune.mount: Mount process exited, code=exited status=32
- [ 7.814142] systemd[1]: Failed to mount Droid mount for /dev/stune.
- [ 7.814427] systemd[1]: dev-stune.mount: Unit entered failed state.
- [ 7.840906] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 7.982571] systemd[1]: Starting udev Coldplug all Devices...
- [ 7.984523] systemd[1]: Starting Clean RPM db region files at each reboot...
- [ 7.986554] systemd[1]: Starting Load/Save Random Seed...
- [ 7.992303] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 7.999622] systemd[1]: Started Clean RPM db region files at each reboot.
- [ 8.014999] systemd[1]: Started Load/Save Random Seed.
- [ 8.016114] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 8.053995] systemd[1]: Started Journal Service.
- [ 8.111444] systemd-journald[682]: Received request to flush runtime journal from PID 1
- [ 8.454083] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 8.457866] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 8.556591] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 8.558186] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 8.762113] FG: get_esr_lvl: 80000,3400,3200,1
- [ 8.762134] FG: get_esr_lvl: 100000,3450,3100,1
- [ 8.762142] FG: get_esr_lvl: 150000,3550,3000,1
- [ 8.762149] FG: get_esr_lvl: 5000000,3550,3000,0
- [ 8.785877] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.788207] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.789515] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.793433] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.802136] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.807382] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.814152] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.815573] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.822411] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.840661] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.841029] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.842137] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.843119] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.843211] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.843903] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.846205] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.854826] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.857090] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.857537] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.867530] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.899562] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.909222] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.915448] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.939702] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.964645] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.990439] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.023301] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.023789] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.023918] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.028536] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.029644] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.065888] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.068608] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.069827] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.072151] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.078902] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.081359] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.086312] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.087328] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.098404] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.109523] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.118110] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.158942] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.174736] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.190465] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.204327] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.216216] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.226126] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.229835] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.248232] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.257469] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.258304] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.281252] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.288646] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.296177] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.301123] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.304472] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.313192] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.313707] of_batterydata_get_best_profile: a1_atl found
- [ 9.340903] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.358045] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.361766] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.371742] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.391297] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.398020] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.425249] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.435732] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.497463] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.512074] drv2604_firmware_load : firmware not found,use default settings.
- [ 9.536475] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.541254] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.543688] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.544190] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.546349] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.565047] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 9.735869] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 9.749658] FG: get_prop_capacity: loading batt profile, return last soc 94
- [ 9.817872] EXT4-fs (sde39): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 9.818478] EXT4-fs (sda12): warning: maximal mount count reached, running e2fsck is recommended
- [ 9.818816] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 9.863973] EXT4-fs (sde32): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 10.317263] fpc1020 soc:fpc_fpc1020: config_irq: dual config irq status: true
- [ 10.317349] SMBCHG: fb_notifier_callback: screen on
- [ 10.408983] dwc3 6a00000.dwc3: request ffffffc074d9de00 was not queued to ep0out
- [ 10.411536] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 10.440106] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 10.465156] droid-hal-init: init first stage started!
- [ 10.467476] droid-hal-init: init second stage started!
- [ 10.474599] droid-hal-init: Running restorecon...
- [ 10.474698] droid-hal-init: waitpid failed: No child processes
- [ 10.475331] droid-hal-init: (Loading properties from /default.prop took 0.00s.)
- [ 10.476381] droid-hal-init: property 'ro.product.cpu.abi' doesn't exist while expanding '/init.extraenv.${ro.product.cpu.abi}.rc'
- [ 10.476426] droid-hal-init: /init.rc: 11: error while expanding import
- [ 10.477893] droid-hal-init: (Parsing /init.environ.rc took 0.00s.)
- [ 10.480301] droid-hal-init: (Parsing init.qcom.power.rc took 0.00s.)
- [ 10.481348] droid-hal-init: (Parsing init.qcom.usb.rc took 0.00s.)
- [ 10.481770] droid-hal-init: (Parsing init.target.rc took 0.00s.)
- [ 10.481796] droid-hal-init: (Parsing /init.qcom.rc took 0.00s.)
- [ 10.482658] droid-hal-init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 10.482731] droid-hal-init: could not import file '/init.zygote64_32.rc' from '/init.rc': No such file or directory
- [ 10.483623] droid-hal-init: (Parsing /init.cm.rc took 0.00s.)
- [ 10.483658] droid-hal-init: (Parsing /init.rc took 0.01s.)
- [ 10.484197] droid-hal-init: Waiting for /dev/.coldboot_done...
- [ 10.484245] droid-hal-init: Waiting for /dev/.coldboot_done took 0.00s.
- [ 10.484283] droid-hal-init: /dev/hw_random not found
- [ 10.484337] keychord: using input dev qpnp_pon for fevent
- [ 10.484352] keychord: using input dev gpio-keys for fevent
- [ 10.484813] droid-hal-init: loglevel: invalid log level'64'
- [ 10.485693] droid-hal-init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 10.487231] droid-hal-init: write_file: Unable to open '/dev/cpuset/foreground/cpus': Permission denied
- [ 10.487281] droid-hal-init: write_file: Unable to open '/dev/cpuset/foreground/mems': Permission denied
- [ 10.487412] droid-hal-init: write_file: Unable to open '/dev/cpuset/foreground/boost/cpus': Permission denied
- [ 10.487451] droid-hal-init: write_file: Unable to open '/dev/cpuset/foreground/boost/mems': Permission denied
- [ 10.487568] droid-hal-init: write_file: Unable to open '/dev/cpuset/background/cpus': Permission denied
- [ 10.487604] droid-hal-init: write_file: Unable to open '/dev/cpuset/background/mems': Permission denied
- [ 10.487721] droid-hal-init: write_file: Unable to open '/dev/cpuset/system-background/cpus': Permission denied
- [ 10.487757] droid-hal-init: write_file: Unable to open '/dev/cpuset/system-background/mems': Permission denied
- [ 10.487864] droid-hal-init: write_file: Unable to open '/dev/cpuset/top-app/cpus': Permission denied
- [ 10.487899] droid-hal-init: write_file: Unable to open '/dev/cpuset/top-app/mems': Permission denied
- [ 10.488619] Registered swp emulation handler
- [ 10.489872] droid-hal-init: /dev/hw_random not found
- [ 10.489968] droid-hal-init: Starting service 'droid_init_done'...
- [ 10.491135] fs_mgr: Cannot open file fstab.qcom
- [ 10.491183] droid-hal-init: fs_mgr_mount_all returned an error
- [ 10.495760] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/atrace.rc took 0.00s.)
- [ 10.496148] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/bootanim.rc took 0.00s.)
- [ 10.496544] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/bootstat.rc took 0.00s.)
- [ 10.500872] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/debuggerd.rc took 0.00s.)
- [ 10.503764] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/drmserver.rc took 0.00s.)
- [ 10.504941] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/dumpstate.rc took 0.00s.)
- [ 10.505485] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 10.505992] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/init-debug.rc took 0.00s.)
- [ 10.506558] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/installd.rc took 0.00s.)
- [ 10.510540] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/logcatd.rc took 0.00s.)
- [ 10.512654] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/logd.rc took 0.00s.)
- [ 10.513152] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediacodec.rc took 0.00s.)
- [ 10.513656] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 10.514102] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediaextractor.rc took 0.00s.)
- [ 10.514544] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mtpd.rc took 0.00s.)
- [ 10.514977] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/perfprofd.rc took 0.00s.)
- [ 10.515418] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/racoon.rc took 0.00s.)
- [ 10.515875] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/rild.rc took 0.00s.)
- [ 10.516242] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/sensor.rc took 0.00s.)
- [ 10.516656] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/servicemanager.rc took 0.00s.)
- [ 10.518512] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/superuser.rc took 0.00s.)
- [ 10.519026] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/uncrypt.rc took 0.00s.)
- [ 10.521024] droid-hal-init: fs_mgr_mount_all returned unexpected error 255
- [ 10.521115] fs_mgr: Cannot open file fstab.qcom
- [ 10.523915] droid-hal-init: Starting service 'logd'...
- [ 10.525155] droid-hal-init: couldn't write 1586 to /dev/cpuset/system-background/tasks: No space left on device
- [ 10.527574] droid-hal-init: (Loading properties from /system/build.prop took 0.00s.)
- [ 10.527674] droid-hal-init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 10.527720] droid-hal-init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 10.533948] fs_mgr: Cannot open file /fstab.qcom
- [ 10.533984] droid-hal-init: unable to read fstab /fstab.qcom: No such file or directory
- [ 10.534539] droid-hal-init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
- [ 10.534588] droid-hal-init: write_file: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
- [ 10.535320] droid-hal-init: Starting service 'debuggerd'...
- [ 10.535946] droid-hal-init: do_start: Service debuggerd64 not found
- [ 10.536037] droid-hal-init: do_start: Service vold not found
- [ 10.539921] droid-hal-init: Not bootcharting.
- [ 10.545023] droid-hal-init: couldn't write 1588 to /dev/cpuset/system-background/tasks: No space left on device
- [ 10.550325] rndis_qc_function_bind_config: rndis_qc_function_bind_config MAC: 00:00:00:00:00:00
- [ 10.552649] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.552691] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.553659] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.553671] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.555621] RNDIS_IPA NetDev was initialized
- [ 10.561920] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
- [ 10.582473] RNDIS_IPA NetDev was opened
- [ 10.582583] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 10.589915] audit: type=1305 audit(1564067118.036:2): audit_pid=1586 old=0 auid=4294967295 ses=4294967295 subj=kernel res=1
- [ 10.589980] logd.auditd: start
- [ 10.590083] logd.klogd: 10589994178
- [ 10.666956] type=1305 audit(1564067118.036:3): audit_rate_limit=20 old=0 auid=4294967295 ses=4294967295 subj=kernel res=1
- [ 10.711484] capability: warning: `ofonod' uses 32-bit capabilities (legacy support in use)
- [ 10.733355] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
- [ 10.734139] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 10.796048] type=1325 audit(1564067118.243:4): table=security family=2 entries=4
- [ 10.803128] type=1325 audit(1564067118.250:5): table=security family=2 entries=4
- [ 10.803327] type=1325 audit(1564067118.250:6): table=security family=2 entries=4
- [ 10.803480] type=1325 audit(1564067118.253:7): table=security family=2 entries=4
- [ 10.803828] type=1325 audit(1564067118.253:8): table=raw family=2 entries=3
- [ 10.805529] type=1325 audit(1564067118.253:9): table=raw family=2 entries=3
- [ 10.805751] type=1325 audit(1564067118.253:10): table=raw family=2 entries=3
- [ 10.805884] type=1325 audit(1564067118.253:11): table=nat family=2 entries=5
- [ 10.806532] type=1325 audit(1564067118.253:12): table=nat family=2 entries=5
- [ 10.806724] type=1325 audit(1564067118.253:13): table=nat family=2 entries=5
- [ 10.807572] type=1325 audit(1564067118.256:14): table=nat family=2 entries=5
- [ 10.809597] type=1325 audit(1564067118.256:15): table=nat family=2 entries=5
- [ 10.809745] type=1325 audit(1564067118.256:16): table=mangle family=2 entries=6
- [ 10.809908] type=1325 audit(1564067118.256:17): table=mangle family=2 entries=6
- [ 10.810512] type=1325 audit(1564067118.256:18): table=mangle family=2 entries=6
- [ 10.810644] type=1325 audit(1564067118.256:19): table=mangle family=2 entries=6
- [ 10.810747] type=1325 audit(1564067118.256:20): table=mangle family=2 entries=6
- [ 10.810845] type=1325 audit(1564067118.256:21): table=mangle family=2 entries=6
- [ 10.810944] type=1325 audit(1564067118.256:22): table=filter family=2 entries=4
- [ 10.811040] type=1325 audit(1564067118.256:23): table=filter family=2 entries=4
- [ 10.811145] type=1325 audit(1564067118.256:24): table=filter family=2 entries=4
- [ 10.811244] type=1325 audit(1564067118.256:25): table=filter family=2 entries=4
- [ 10.813289] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 10.816549] type=1325 audit(1564067118.263:26): table=filter family=2 entries=4
- [ 10.817223] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 10.830350] type=1325 audit(1564067118.280:27): table=mangle family=2 entries=6
- [ 10.855934] type=1325 audit(1564067118.303:28): table=nat family=2 entries=5
- [ 10.870757] type=1325 audit(1564067118.320:29): table=filter family=10 entries=4
- [ 10.882912] type=1325 audit(1564067118.330:30): table=mangle family=10 entries=6
- [ 10.904369] type=1325 audit(1564067118.353:31): table=filter family=10 entries=4
- [ 10.912571] type=1325 audit(1564067118.360:32): table=filter family=2 entries=4
- [ 10.919163] type=1325 audit(1564067118.366:33): table=filter family=10 entries=8
- [ 10.921317] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 10.923441] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- [ 10.923543] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- [ 10.930558] sps:BAM 0x0000000006b04000 (va:0xffffff80024a0000) enabled: ver:0x27, number of pipes:8
- [ 10.933434] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.933482] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.935149] type=1325 audit(1564067118.383:34): table=filter family=2 entries=8
- [ 10.936829] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.938689] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.938712] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.940062] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.940096] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.941030] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.941115] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.941124] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.942351] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 10.942382] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 10.944529] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 10.944714] RNDIS_IPA NetDev pipes were connected
- [ 10.946825] type=1325 audit(1564067118.393:35): table=filter family=10 entries=12
- [ 10.953762] type=1325 audit(1564067118.400:36): table=filter family=2 entries=12
- [ 10.959273] type=1325 audit(1564067118.406:37): table=filter family=10 entries=13
- [ 10.965470] type=1325 audit(1564067118.413:38): table=filter family=2 entries=13
- [ 10.972011] type=1325 audit(1564067118.420:39): table=filter family=10 entries=14
- [ 10.976810] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 10.978881] type=1325 audit(1564067118.426:40): table=filter family=2 entries=14
- [ 10.988924] type=1325 audit(1564067118.436:41): table=filter family=10 entries=15
- [ 11.001361] type=1325 audit(1564067118.450:42): table=filter family=10 entries=16
- [ 11.013156] audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
- [ 11.013184] audit: rate limit exceeded
- [ 11.669307] FG: fg_batt_profile_init: Battery SOC: 95, V: 4235967uV
- [ 17.480515] FG: get_esr_lvl: 80000,3400,3200,1
- [ 17.480533] FG: get_esr_lvl: 100000,3450,3100,1
- [ 17.480540] FG: get_esr_lvl: 150000,3550,3000,1
- [ 17.480547] FG: get_esr_lvl: 5000000,3550,3000,0
- sh-3.2#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement