SHARE
TWEET

Untitled

osum4est Apr 23rd, 2019 137 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Welcome to Arduino UART Debugger 3000!
  2. ⸮0
  3. ⸮@⸮⸮⸮⸮<⸮⸮⸮>⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮[45410] fastboot: getvar:slot-count
  4. [45410] battery voltage: 4313000uV
  5. [45410] battery voltage: 4313000uV
  6. [45440] fastboot: download:0130c000
  7. [45770] fastboot: boot
  8. [45770] boot_verifier: Device is in ORANGE boot state.
  9. [45770] Device is unlocked! Skipping set device status...
  10. [45780] Your device has been unlocked and can't be trusted.
  11. [45780] LK SEC APP Handle: 0x1
  12. [45800] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
  13. [45800] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT done with ret: 0 time taken: 1\""
  14. [45810] decompressing kernel image: start
  15. [46290] decompressing kernel image: done
  16. [46290] Add DTB entry 422/00000080/0x00000000/10001/20009/10013/0/0/9299a135/5fcf8
  17. [46310] Add DTB entry 422/00000080/0x00000000/10001/3/4/45/1/9299a135/5fcf8
  18. [46320] Best match DTB tags 422/00000080/0x00000000/10001/20009/10013/0/0/9299a135/5fcf8
  19. [46320] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x455013/0x0/0x0
  20. [46370] [DISP] Trigger updating for MIPI_CMD_PANEL.
  21. [46400] pm8x41_get_is_cold_boot: cold boot
  22. [46400] check_reboot_mode: restart_reason: 0x00000000
  23. [46400] target_pause_for_battery_charge : pon_reason is 177 cold_boot:1
  24. [46410] target_pause_for_battery_charge : GCC_RESET_STATUS(0x66BF028): 0x2
  25.  
  26. [46430] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi
  27. [46440] pm8x41_get_is_cold_boot: cold boot
  28. [46440] ddr_vendor 40] chipset_ver is 1005F0E1
  29.  
  30. [46460] chipset_ver is 1005F0E1
  31.  
  32. [46460] HW Security has been enabled !
  33.  
  34. [46460] Device CID is not super CID
  35.  
  36. [46470] Device CID is not super CID
  37.  
  38. [46470] target_get_fingerprint_id: status:1
  39. [46470] [HTC] lba of setting:0
  40. [46490] [HTC] 0 is read from setting, which is invalid
  41. [46490] get_writable_core_dump_size: check_rdump_ext4_file_map() fails: -1
  42. [46500] check_reboot_mode: restart_reason: 0x00000000
  43. [46500] get_reboot_reason_type: poff_reason1: 0x2
  44. [46520] pon reason: 0xa1, 0xb1
  45. [46520] pm8x41_get_is_cold_boot: cold boot
  46. [46520] is_usb_pon_reason: pon reason: 0xa1, 0xb1
  47. [46530] pm8x41_get_is_cold_boot: cold boot
  48. [46530] check_reboot_mode: restart_reason: 0x00000000
  49. [46530] google_boot_logger: reason type: 0x3, reset reason 0x0
  50. [46550] check_reboot_mode: restart_reason: 0x00000000
  51. [46550] get_reboot_reason_type: poff_reason1: 0x2
  52. [46560] pon reason: 0xa1, 0xb1
  53. [46560] pm8x41_get_is_cold_boot: cold boot
  54. [46560] is_usb_pon_reason: pon reason: 0xa1, 0xb1
  55. [46580] pm8x41_get_is_cold_boot: cold boot
  56. [46580] check_reboot_mode: restart_reason: 0x00000000
  57. [46590] google_boot_logger: reason type: 0x3, reset reason 0x0
  58. [46590] Get partition(system_b) lun and count
  59. [46610] Found partitoin name (system_b)
  60. [46610] Add kernel cmdline parameter( ro root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sda34") to enable dm-verity
  61. [46620] Add kernel cmdline parameter( rootwait skip_initramfs init=/init) to boot without ramdisk
  62. [46640] get_wifi_country_code: mfg_wifi 10
  63.  
  64. [46640] wifi_country US
  65.  
  66. [46640] get_wifi_country_code: mfg_wifi 10
  67.  
  68. [46650] wifi_country US
  69.  
  70. [46650] cmdline: earlycon=msm_hsl_uart,0x075B0000 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 selinux=0 audit=0 androidboot.bootde[46680] Updating device tree: start
  71. [46710] Appending /chosen/misc node data into FDT
  72.  
  73. [46710] firmware_main_version: 16-byte added
  74.  
  75. [46730] enable_log: 64-byte added
  76.  
  77. [46730] (setting_get_anti_rollback_1_lsb):(00000000)
  78.  
  79. [46730] QFPROM_CORR_ANTI_ROLLBACK_1_LSB: 9-byte added
  80.  
  81. [46740] (setting_get_anti_rollback_1_msb):(00000000)
  82.  
  83. [46740] QFPROM_CORR_ANTI_ROLLBACK_1_MSB: 9-byte added
  84.  
  85. [46760] (setting_get_anti_rollback_2_lsb):(00000000)
  86.  
  87. [46760] QFPROM_CORR_ANTI_ROLLBACK_2_LSB: 9-byte added
  88.  
  89. [46770] (setting_get_anti_rollback_2_msb):(00000000)
  90.  
  91. [46770] QFPROM_CORR_ANTI_ROLLBACK_2_MSB: 9-byte added
  92.  
  93. [46790] [INFO] setting_get_msm_serial: chip serial number msm_serial: a8f7a84f
  94. [46790] QFPROM_CORR_MSM_SERIAL_NUM: 21-byte added
  95.  
  96. [46800] Appending /chosen/mfg node data into FDT
  97.  
  98. [46800] skuid.bom_id: 1-byte added
  99.  
  100. [46820] skuid.dw0: 4-byte added
  101.  
  102. [46820] skuid.rf_id: 32-byte added
  103.  
  104. [46820] skuid.engineer_id: 4-byte added
  105.  
  106. [46830] skuid.pcb_id: 1-byte added
  107.  
  108. [46830] Appending /chosen/board_info node data into FDT
  109.  
  110. [46850] pid: 4-byte added
  111.  
  112. [46850] Appending calibration data info FDT
  113.  
  114. [46860] bt_flash: 6-byte added
  115.  
  116. [46860] ps_flash: 8-byte added
  117.  
  118. [46860] ws_flash: 4-byte added
  119.  
  120. [46880] als_flash: 4-byte added
  121.  
  122. [46880] gs_flash: 4-byte added
  123.  
  124. [46880] gyro_flash: 768-byte added
  125.  
  126. [46880] wifi_eeprom: 2048-byte added
  127.  
  128. [46890] cam_awb: 16384-byte added
  129.  
  130. [46890] ps_adi_flash: 11-byte added
  131.  
  132. [46890] bs_flash: 5-byte added
  133.  
  134. [46910] disp_flash: 64-byte added
  135.  
  136. [46910] Appending /chosen/radio node data into FDT
  137.  
  138. [46920] secure_flag: 4-byte added
  139.  
  140. [46920] htc_smem_pid: 4-byte added
  141.  
  142. [46920] htc_smem_cid: 16-byte added
  143.  
  144. [46940] htc_smem_imei: 16-byte added
  145.  
  146. [46940] htc_smem_imei2: 16-byte added
  147.  
  148. [46940] htc_smem_meid: 16-byte added
  149.  
  150. [46950] sku_id: 48-byte added
  151.  
  152. [46950] fdt_get_wlan_ramdump_size: wlan ramdump len: 0x200000
  153. [46950] target_update_battery_data PLATFORM = 8996
  154.  
  155. [46970] target_update_battery_data offset:-1
  156.  
  157. [46970] target_update_battery_data fdt_setprop_inplace fail in magic_num,ret:-4
  158.  
  159. [46980] WARN: Failed to update battery data
  160.  
  161. [46980] target_update_display_data done
  162.  
  163. [47000] Updating device tree: done
  164. [47000] platform_vib_delay: delay for 200 ms to ensure vibrator can be disabled
  165.  
  166. [47130] platform_vib_delay: delay for 200 ms end
  167.  
  168. [47130] set_imem_lock_state: state = 0
  169. [47150] restart_reason set to 0x776655aa
  170. [47150] UFS set Write Protection
  171. [47150] Power on Write Protect request failed. Retrying again.
  172. [47160] Power on Write Protect status: 1
  173. [47160] Turn off MIPI_CMD_PANEL.
  174. [47160] Continuous splash enabled, keeping panel alive.
  175. [47180] target_uninit(): abnrst_subsys_skip: 0
  176. [47180] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
  177. [47190] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL done with ret: 0 time taken: 1\""
  178. [47210] Return value from recv_data: 14
  179. [47220] RPM GLINK UnInit
  180. [47220] Qseecom De-Init Done in Appsbl
  181. [47220] booting linux @ 0x80080000, ramdisk @ 0x82200000 (1009903), tags/device tree @ 0x82000000
  182. [47240] pm8x41_read_time(): RTC_WR_EN_CTL1: 0x80
  183.  
  184. [47240] pm8x41_read_bytes: value: 0xda
  185.  
  186. [47240] pm8x41_read_bytes: value: 0x53
  187.  
  188. [47240] pm8x41_read_bytes: value: 0x0
  189.  
  190. [47240] pm8x41_read_bytes: value: 0x0
  191.  
  192. [47240]  val0:218 val1:83 val2:0 val3:0
  193.  
  194. [47240] pm8x41_read_time: secs = 21466, h::m:s == 5::57::46, d/m/y = 1/0/70
  195.  
  196. [47240] record_rtc_end_time: secs = 21466, h::m:s == 5::57::46, d/m/y = 1/0/70
  197.  
  198. [47240] ### LK End time: 1970-01-01 05:57:46
  199.  
  200. [47240] ### LK delta time: 78 secs
  201.  
  202. [47240] Jumping to kernel via monitor
  203. [    0.000000] c0      0 Initializing cgroup subsys cpuset
  204. [    0.000000] c0      0 Initializing cgroup subsys cpu
  205. [    0.000000] c0      0 Initializing cgroup subsys cpuacct
  206. [    0.000000] c0      0 Initializing cgroup subsys schedtune
  207. [    0.000000] c0      0 Linux version 3.18.70-Lineage-g54b61efe09a-dirty (osum4est@AwesomeArchPC) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #42 SMP PREEMPT Wed Apr 24 03:05:20 UTC 2019
  208. [    0.000000] c0      0 Boot CPU: AArch64 Processor [512f2011] v1.1 + PMI8996 Marlin A
  209. [    0.000000] c0      0 Early serial console at I/O port 0x0 (options '')
  210. [    0.000000] c0      0 bootconsole [uart0] enabled
  211. [    0.000000] c0      0 efi: Getting EFI parameters from FDT:
  212. [    0.000000] c0      0 efi: UEFI not found.
  213. [    0.000000] c0      0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000000000000, size 48 MiB
  214. [    0.000000] c0      0 Reserved memory: reserved region for n'peripheral_region@8ea00000': base 0x0000000000000000, size 45 MiB
  215. [    0.000000] c0      0 Reserved memory: reserved region for ne 'modem_region@88800000': base 0x0000000000000000, size 98 MiB
  216. [    0.000000] c0      0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000000000000, size 0 MiB
  217. [    0.000000] c0      0 Reserved memory: reserved region for nde 'cont_splash_mem@83401000': base 0x0000000000000000, size 49 MiB
  218. [    0.000000] c0      0 Reserved memory: reserved region for n 'cont_splash_mem_hdmi@b1c00000': base 0x0000000000000000, size 35 MiB
  219. [    0.000000] c0      0 Reserved memory: reserved region for ntc_reserve1_region@0': base 0x0000000000000000, size 1 MiB
  220. [    0.000000] c0      0 Reserved memory: reserved region for node 'msm_rtb_region@0': base 0x0000000000000000, size 1 MiB
  221. [    0.000000] c0      0 Reserved memory: reserved region for node 'htc_reserve2_region@0': base 0x0000000000000000, size 8 MiB
  222. [    0.000000] c0      0 Reserved memory: reserved region for node 'htc_rtel_region@0': base 0x0000000000000000, size 20 MiB
  223. [    0.000000] c0      0 Reserved memory: reserved region for node 'ramoops_region@0': base 0x0000000000000000, size 1 MiB
  224. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 48 MiB
  225. [    0.000000] c0      0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
  226. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 45 MiB
  227. [    0.000000] c0      0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
  228. [    0.000000] c0      0 Reserved memory: allocated memory for 'adsp_region' node: base 0x0000000000000000, size 4 MiB
  229. [    0.000000] c0      0 Reserved memory: incorrect alignment of CMA region
  230. [    0.000000] c0      0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x0000000000000000, size 20 MiB
  231. [    0.000000] c0      0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
  232. [    0.000000] c0      0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
  233. [    0.000000] c0      0 Reserved memory: allocated memory for 'secure_region' node: base 0x0000000000000000, size 92 MiB
  234. [    0.000000] c0      0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 92 MiB
  235. [    0.000000] c0      0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
  236. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 98 MiB
  237. [    0.000000] c0      0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
  238. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
  239. [    0.000000] c0      0 Reserved memory: initialized node htc_reserve1_region@0, compatible id removed-dma-pool
  240. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
  241. [    0.000000] c0      0 Reserved memory: initialized node msm_rtb_region@0, compatible id removed-dma-pool
  242. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 8 MiB
  243. [    0.000000] c0      0 Reserved memory: initialized node htc_reserve2_region@0, compatible id removed-dma-pool
  244. [    0.000000] c0      0 Reserved memory: created CMA memory pool at 0x0000000000000000, size 20 MiB
  245. [    0.000000] c0      0 Reserved memory: initialized node htc_rtel_region@0, compatible id shared-dma-pool
  246. [    0.000000] c0      0 Removed memory: created DMA memory pool at 0x0000000000000000, size 1 MiB
  247. [    0.000000] c0      0 Reserved memory: initialized node ramoops_region@0, compatible id removed-dma-pool
  248. [    0.000000] c0      0 cma: Reserved 32 MiB at 0x0000000000000000
  249. [    0.000000] c0      0 psci: probing for conduit method from DT.
  250. [    0.000000] c0      0 psci: PSCIv1.0 detected in firmware.
  251. [    0.000000] c0      0 psci: Using standard PSCI v0.2 function IDs
  252. [    0.000000] c0      0 psci: Initializing psci_cpu_init
  253. [    0.000000] c0      0 psci: Initializing psci_cpu_init
  254. [    0.000000] c0      0 psci: Initializing psci_cpu_init
  255. [    0.000000] c0      0 PERCPU: Embedded 15 pages/cpu @0000000000000000 s23424 r8192 d29824 u61440
  256. [    0.000000] c0      0 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 974562
  257. [    0.000000] c0      0 Kernel command line: earlycon=msm_hsl_uart,0x075B0000 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=marlin user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff loop.max_part=7 selinux=0 audit=0 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=HT72P0203430 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi androidboot.slot_suffix=_b fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 kernelflag=0x00000002 debugflag=0x00000000 androidboot.hardware.revision=PVT radioflag=0x00000008 radioflagex1=0x00000000 radioflagex2=0x00000000 cpumask=0x00000000 androidboot.hardware.ddr=4096MB,Hynix,LPDDR4 androidboot.ddrinfo=00000006 androidboot.ddrsize=4GB androidboot.hardware.color=GRA00 androidboot.hardware.ufs=32GB,Samsung androidboot.msm.hw[    0.000000] c0      0 dm: will configure 'system' on dm-0
  258. [    0.000000] c0      0 log_buf_len individual max cpu contribma-reserved)
  259. [    0.000000] c0      0 Virtual kernel memory layout:
  260. [    0.000000] c0      0     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
  261. [    0.000000] c0      0     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  262. [    0.000000] c0      0               0xffffffbdc0000000 - 0xffffffbdc3f95400   (    63 MB actual)
  263. [    0.000000] c0      0     PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)
  264. [    0.000000] c0      0     fixed   : 0xffffffbffbdfb000 - 0xffffffbffbdff000   (    16 KB)
  265. [    0.000000] c0      0     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  266. [    0.000000] c0      0     memory  : 0xffffffc000000000 - 0xffffffc0fe550000   (  4069 MB)
  267. [    0.000000] c0      0       .init : 0x0000000000000000 - 0x0000000000000000   (   496 KB)
  268. [    0.000000] c0      0       .text : 0x0000000000000000 - 0x0000000000000000   ( 15882 KB)
  269. [    0.000000] c0      0       .data : 0x0000000000000000 - 0x0000000000000000   (  1693 KB)
  270. [    0.000000] c0      0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  271. [    0.000000] c0      0 Preemptible hierarchical RCU implementation.
  272. [    0.000000] c0      0    RCU dyntick-idle grace-period acceleration is enabled.
  273. [    0.000000] c0      0    RCU kthread priority: 1.
  274. [    0.000000] c0      0 NR_IRQS:64 nr_irqs:64 0
  275. [    0.000000] c0      0 CPU0: found redistributor 0 region 0:0x0000000000000000
  276. [    0.000000] c0      0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
  277. [    0.000000] c0      0 MPM 1 irq mapping errored -517
  278. [    0.000000] c0      0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  279. [    0.000003] c0      0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  280. [    0.008859] c0      0 Switched to clocksource arch_sys_counter
  281. [    0.015585] c0      0 Console: colour dummy device 80x25
  282. [    0.021693] c0      0 allocated 16777216 bytes of page_cgroup
  283. [    0.026441] c0      0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
  284. [    0.035188] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  285. [    0.045408] c0      0 pid_max: default: 32768 minimum: 301
  286. [    0.050945] c0      0 Security Framework initialized
  287. [    0.055845] c0      0 Yama: becoming mindful.
  288. [    0.060219] c0      0 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  289. [    0.067734] c0      0 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  290. [    0.076123] c0      0 Initializing cgroup subsys memory
  291. [    0.080955] c0      0 Initializing cgroup subsys devices
  292. [    0.086221] c0      0 Initializing cgroup subsys freezer
  293. [    0.091516] c0      0 Initializing cgroup subsys net_cls
  294. [    0.096812] c0      0 Initializing cgroup subsys blkio
  295. [    0.101932] c0      0 Initializing cgroup subsys perf_event
  296. [    0.107490] c0      0 Initializing cgroup subsys debug
  297. [    0.112903] c0      1 sched-energy: Sched-energy-costs installed from DT
  298. [    0.119309] c0      1 CPU0: update cpu_capacity 763
  299. [    0.124179] c0      1 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
  300. [    0.133112] c0      1 EFI services will not be available.
  301. [    0.138490] c0      1 ASID allocator initialised with 32768 entries
  302. [    0.144824] c0      0 NOHZ: local_softirq_pending 02
  303. [    0.168737] c0      1 MSM Memory Dump base table set up
  304. [    0.173019] c0      1 MSM Memory Dump apps data table already set up in LK
  305. [    0.179819] c0      1 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
  306. [    0.188792] c0      1 clock-cpu-8996: configuring clocks for the perf cluster
  307. [    0.195659] c0      1 cpu_clock_8996_early_init: finished CPU clock configuration
  308. [    0.217514] c1      0 CPU1: update cpu_capacity 763
  309. [    0.217527] c1      0 CPU1: found redistributor 1 region 0:0x0000000000000000
  310. [    0.217564] c1      0 CPU1: Booted secondary processor [512f2011]
  311. [    0.228725] c2      0 CPU2: update cpu_capacity 1024
  312. [    0.228754] c2      0 CPU2: found redistributor 100 region 0:0x0000000000000000
  313. [    0.228828] c2      0 CPU2: Booted secondary processor [512f2051]
  314. [    0.239766] c3      0 CPU3: update cpu_capacity 1024
  315. [    0.239777] c3      0 CPU3: found redistributor 101 region 0:0x0000000000000000
  316. [    0.239801] c3      0 CPU3: Booted secondary processor [512f2051]
  317. [    0.239914] c0      1 Brought up 4 CPUs
  318. [    0.297426] c0      1 SMP: Total of 4 processors activated.
  319. [    0.302975] c0      1 CPU features: detected feature: GIC system register CPU interface
  320. [    0.311124] c0      1 CPU3: update max cpu_capacity 1024
  321. [    0.318109] c0      1 devtmpfs: initialized
  322. [    0.328336] c0      1 DMI not present or invalid.
  323. [    0.332321] c1     18 CPU1: update max cpu_capacity 763
  324. [    0.332329] c2     24 CPU2: update max cpu_capacity 1024
  325. [    0.342085] c0      1 pinctrl core: initialized pinctrl subsystem
  326. [    0.342485] c0      1 regulator-dummy: no parameters
  327. [    0.415991] c0      1 NET: Registered protocol family 16
  328. [    0.422006] c0      1 schedtune: init normalization constants...
  329. [    0.427000] c0      1 schedtune: CLUSTER[   0]     min_pwr:     0 max_pwr:    52
  330. [    0.434366] c0      1 schedtune: CPU[0]            min_pwr:     0 max_pwr:   925
  331. [    0.441757] c0      1 schedtune: CPU[1]            min_pwr:     0 max_pwr:   925
  332. [    0.449125] c0      1 schedtune: CLUSTER[   0]     min_pwr:     0 max_pwr:    96
  333. [    0.456502] c0      1 schedtune: CPU[2]            min_pwr:     0 max_pwr:  1715
  334. [    0.463880] c0      1 schedtune: CPU[3]            min_pwr:     0 max_pwr:  1715
  335. [    0.471258] c0      1 schedtune: SYSTEM            min_pwr:     0 max_pwr:  5428
  336. [    0.478636] c0      1 schedtune: using normalization constants mul: 2187046722 sh1: 1 sh2: 12
  337. [    0.487140] c0      1 schedtune: verify normalization constants...
  338. [    0.493306] c0      1 schedtune: max_pwr/2^0: 5428 => norm_pwr:  1024
  339. [    0.499729] c0      1 schedtune: max_pwr/2^1: 2714 => norm_pwr:   512
  340. [    0.506152] c0      1 schedtune: max_pwr/2^2: 1357 => norm_pwr:   256
  341. [    0.512576] c0      1 schedtune: max_pwr/2^3:  678 => norm_pwr:   127
  342. [    0.519000] c0      1 schedtune: max_pwr/2^4:  339 => norm_pwr:    63
  343. [    0.525423] c0      1 schedtune: max_pwr/2^5:  169 => norm_pwr:    31
  344. [    0.531847] c0      1 schedtune: configured to support 5 boost groups
  345. [    0.552255] c0      1 cpuidle: using governor ladder
  346. [    0.568904] c0      1 cpuidle: using governor menu
  347. [    0.585564] c0      1 cpuidle: using governor qcom
  348. [    0.591223] c0      1 vdso: 2 pages (1 code @ 0000000000000000, 1 data @ 0000000000000000)
  349. [    0.598544] c0      1 hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
  350. [    0.606548] c0      1 software IO TLB [mem 0xf6400000-0xf6800000] (4MB) mapped at [0000000000000000-0000000000000000]
  351. [    0.617455] c0      1 DMA: preallocated 256 KiB pool for atomic allocations
  352. [    0.642417] c0      1 sps:sps is ready.
  353. [    0.645982] c0      1 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
  354. [    0.658419] c0      1 i2c-msm-v2 75b5000.i2c: could not find node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
  355. [    0.670165] c0      1 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
  356. [    0.682376] c0      1 irq: no irq domain found for /soc/pinc00 !
  357. [    0.690502] c0      1 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  358. [    0.765439] c0      1 smd_channel_probe_now: allocation table not initialized
  359. [    0.771888] c0      1 smd_channel_probe_now: allocation table not initialized
  360. [    0.779013] c0      1 smd_channel_probe_now: allocation table not initialized
  361. [    0.786076] c0      1 smd_channel_probe_now: allocation table not initialized
  362. [    0.793172] c0      1 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
  363. [    0.800994] c0      1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
  364. [    0.808300] c0      1 platform 83700000.qcom,msm-rtb: assigned reserved memory node msm_rtb_region@0
  365. [    0.817822] c0      1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
  366. [    0.831902] c0      1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  367. [    0.840380] c0      1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
  368. [    0.854375] c0      1 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
  369. [    0.861037] c0      1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
  370. [    0.871019] c0      1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
  371. [    0.880630] c0      1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
  372. [    0.889940] c0      1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
  373. [    0.901413] c0      1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  374. [    0.915491] c0      1 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  375. [    0.929676] c0      1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  376. [    0.943734] c0      1 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  377. [    0.958248] c0      1 msm_thermal:vdd_restriction_reg_init Dregulator vdd-dig probe
  378. [    0.966213] c0      1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  379. [    0.974720] c0      1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  380. [    0.999518] c0      1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
  381. [    1.007583] c0      4 smd_channel_probe_now: allocation table not initialized
  382. [    1.015136] c0     51 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
  383. [    1.025406] c0      1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
  384. [    1.034434] c0      1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
  385. [    1.043685] c0      1 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
  386. [    1.053950] c0      1 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
  387. [    1.059046] c0      1 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
  388. [    1.064825] c0      1 apcc_l3_mem_acc_corner: 0 <--> 0 mV
  389. [    1.070263] c0      1 gfx_mem_acc_corner: 0 <--> 0 mV
  390. [    1.075468] c0      1 kryo0-retention: 468 <--> 892 mV at 520 mV
  391. [    1.081340] c0      1 kryo0: 468 <--> 892 mV at 754 mV
  392. [    1.086472] c0      1 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
  393. [    1.101346] c0      1 kryo1-retention: 468 <--> 892 mV at 52468 <--> 892 mV at 754 mV
  394. [    1.112425] c0      1 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
  395. [    1.131918] c0      1 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
  396. [    1.142098] c0      1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  397. [    1.168105] c0      1 __of_mpm_init(): MPM driver mapping exists
  398. [    1.174333] c0      1 platform 84000000.qcom,rmtfs_rtel_sharedmem: assigned reserved memory node htc_rtel_region@0
  399. [    1.185582] c0      1 console [pstore-1] enabled
  400. [    1.189387] c0      1 pstore: Registered ramoops as persistent store backend
  401. [    1.196212] c0      1 ramoops: attached 0x100000@0x83500000, ecc: 0/0
  402. [    1.204059] c0      1 bootloader_log: allocate buffer for bootloader log, size: 458752
  403. [    1.211210] c0      1 bldr_log_parser: size 18384
  404. [    1.215705] c0      1 bootloader_log: allocate buffer for last bootloader log, size: 458752
  405. [    1.224176] c0      1 bldr_log_parser: size 17712
  406. [    1.237920] c0      1 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  407. [    1.243701] c0      1 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
  408. [    1.250645] c0      1 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
  409. [    1.259377] c0      1 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
  410. [    1.265118] c0      1 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
  411. [    1.272099] c0      1 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
  412. [    1.284396] c0     53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  413. [    1.290155] c0     53 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
  414. [    1.297122] c0     53 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
  415. [    1.305014] c0     53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
  416. [    1.311205] c0     53 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
  417. [    1.318213] c0     53 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
  418. [    1.325978] c0     53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
  419. [    1.332304] c0     53 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
  420. [    1.339307] c0     53 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
  421. [    1.346874] c0     53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  422. [    1.355495] c0     53 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  423. [    1.361817] c0     53 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  424. [    1.368951] c0     53 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  425. [    1.375918] c0     53 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  426. [    1.382568] c0     53 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  427. [    1.389561] c0     53 pm8994_s3: 1300 mV normal idle
  428. [    1.394596] c0     53 pm8994_s4: 1800 mV normal idle
  429. [    1.399600] c0     53 pm8994_s5: 2150 mV normal idle
  430. [    1.404648] c0     53 pm8994_s7: 800 mV normal idle
  431. [    1.409593] c0     53 pm8994_l1: 1000 mV normal idle
  432. [    1.414645] c0     53 pm8994_l2: 1250 mV normal idle
  433. [    1.419990] c0     53 pm8994_l3: 1100 mV normal idle
  434. [    1.424719] c0     53 pm8994_l4: 1225 mV normal idle
  435. [    1.430124] c0     53 pm8994_l6: 1800 mV normal idle
  436. [    1.434820] c0     53 pm8994_l8: 1800 mV normal idle
  437. [    1.439795] c0     53 pm8994_l9: 1800 mV normal idle
  438. [    1.444848] c0     53 pm8994_l10: 2850 mV normal idle
  439. [    1.449954] c0     53 pm8994_l11: 1200 mV normal idle
  440. [    1.455092] c0     53 pm8994_l12: 1800 mV normal idle
  441. [    1.460558] c0     53 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  442. [    1.467196] c0     53 pm8994_l14: 1800 mV normal idle
  443. [    1.472728] c0     53 pm8994_l15: 1800 mV normal idle
  444. [    1.477392] c0     53 pm8994_l16: 2700 mV normal idle
  445. [    1.482932] c0     53 pm8994_l17: 3300 mV normal idle
  446. [    1.487952] c0     53 pm8994_l18: 1800 <--> 1900 mV at 1800 mV normal idle
  447. [    1.494566] c0     53 pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
  448. [    1.502617] c0     53 pm8994_l19: 2850 mV normal idle
  449. [    1.507477] c0     53 pm8994_l20: 2950 mV normal idle
  450. [    1.512735] c0     53 pm8994_l21: 3000 <--> 3300 mV at 3000 mV normal idle
  451. [    1.519697] c0     53 pm8994_l22: 3300 mV normal idle
  452. [    1.524653] c0     53 pm8994_l23: 1800 mV normal idle
  453. [    1.529755] c0     53 pm8994_l24: 3075 mV normal idle
  454. [    1.534850] c0     53 pm8994_l25: 1200 mV normal idle
  455. [    1.540371] c0     53 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
  456. [    1.546723] c0     53 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  457. [    1.554051] c0     53 pm8994_l27: 1000 mV normal idle
  458. [    1.559181] c0     53 pm8994_l28: 925 mV normal idle
  459. [    1.564516] c0     53 pm8994_l29: 3000 mV normal idle
  460. [    1.569338] c0     53 pm8994_l30: 1800 mV normal idle
  461. [    1.574445] c0     53 pm8994_l32: 1800 mV normal idle
  462. [    1.580952] c0     53 pm8994_lvs1: no parameters
  463. [    1.584988] c0     53 pm8994_lvs2: no parameters
  464. [    1.589544] c0     53 pmi8994_s1: 1025 mV normal idle
  465. [    1.594696] c0     53 pmi8994_boost_5v: no parameters
  466. [    1.599481] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
  467. [    1.610598] c0     53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
  468. [    1.619693] c0     53 pmi8994_boost_pin_ctrl: no parameters
  469. [    1.625008] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
  470. [    1.636981] c0     53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
  471. [    1.646637] c0     53 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
  472. [    1.654331] c0     53 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
  473. [    1.660965] c0     53 pm8994_s11_avs_limit: 470 <--> 1140 mV
  474. [    1.666582] c0     53 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
  475. [    1.678480] c0     53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  476. [    1.692557] c0     53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  477. [    1.706738] c0     53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  478. [    1.715158] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  479. [    1.729221] c0     53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  480. [    1.744069] c0     53 msm_thermal:vdd_restriction_reg_init Dregulator vdd-gfx probe
  481. [    1.751717] c0     53 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  482. [    1.760209] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  483. [    1.775404] c0     53 msm_mpm_dev_probe(): Cannot get clk re    53 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  484. [    1.788992] c0     53 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
  485. [    1.795932] c0     53 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
  486. [    1.803951] c0     53 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
  487. [    1.810002] c0     53 i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517
  488. [    1.816984] c0     53 i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517
  489. [    1.825004] c0     53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  490. [    1.831072] c0     53 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
  491. [    1.838077] c0     53 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
  492. [    1.845912] c0     53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
  493. [    1.852158] c0     53 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
  494. [    1.859171] c0     53 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
  495. [    1.866941] c0     53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
  496. [    1.873258] c0     53 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
  497. [    1.880273] c0     53 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
  498. [    1.887970] c0     53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  499. [    1.911838] c0     53 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
  500. [    1.918855] c0     53 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
  501. [    1.925903] c0     53 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
  502. [    1.933968] c0     53 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
  503. [    1.942410] c0     53 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
  504. [    1.950036] c0     53 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
  505. [    1.958100] c0     53 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
  506. [    1.966534] c0     53 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
  507. [    1.974097] c0     53 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
  508. [    1.981971] c0     53 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
  509. [    1.996851] c0     53 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
  510. [    2.005276] c0     53 pmi8994_boost_5v: no parameters
  511. [    2.009499] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
  512. [    2.020602] c0     53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
  513. [    2.029578] c0     53 pmi8994_boost_pin_ctrl: no parameters
  514. [    2.035011] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
  515. [    2.046981] c0     53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
  516. [    2.057301] c0     53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  517. [    2.071370] c0     53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  518. [    2.085557] c0     53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  519. [    2.093978] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  520. [    2.108042] c0     53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  521. [    2.122696] c0     53 msm_thermal:vdd_restriction_reg_init Dregulator vdd-gfx probe
  522. [    2.130532] c0     53 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  523. [    2.139029] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  524. [    2.154272] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc01855] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
  525. [    2.170744] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0ant fuses = N
  526. [    2.179863] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
  527. [    2.188593] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
  528. [    2.198750] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  529. [    2.210180] c0     53 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
  530. [    2.225659] c0     53 cpr3_msm8996_hmss_calculate_open_loop_loop= 565000 uV
  531. [    2.236511] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    SVS: open-loop= 625000 uV
  532. [    2.247619] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    NOM: open-loop= 715000 uV
  533. [    2.258730] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused  TURBO: open-loop= 850000 uV
  534. [    2.269951] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 284
  535. [    2.280173] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused    SVS: quot[ 7]= 390, quot_offset[ 7]= 100
  536. [    2.292411] c0     53 cpr3_msm8996_hmss_calculate_target_quo0_pwrcl_corner: fused    NOM: quot[ 7]= 596, quot_offset[ 7]= 205
  537. [    2.304660] c0     53 cpr3_msm8996_hmss_calculate_target_quoients: apc0_pwrcl_corner: fused  TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
  538. [    2.317038] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0r: speed bin = 1
  539. [    2.324790] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
  540. [    2.333558] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
  541. [    2.342498] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
  542. [    2.351090] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
  543. [    2.361076] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  544. [    2.372255] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
  545. [    2.383036] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    SVS: open-loop= 625000 uV
  546. [    2.393973] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    NOM: open-loop= 715000 uV
  547. [    2.404910] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused  TURBO: open-loop= 850000 uV
  548. [    2.415855] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
  549. [    2.427741] c0     53 cpr3_msm8996_hmss_calculate_open_loop_: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 645000 uV
  550. [    2.439636] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    SVS: CBF offset open-loop= 645000 uV
  551. [    2.451525] c0     53 cpr3_msm8996_hmss_calculate_open_loop_: apc0_cbf_corner: fused    NOM: CBF offset open-loop= 765000 uV
  552. [    2.463416] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused  TURBO: CBF offset open-loop= 890000 uV
  553. [    2.475348] c0     53 cpr3_msm8996_hmss_calculate_target_quoapc0_cbf_corner: fused MinSVS: quot[ 7]= 284
  554. [    2.485467] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused    SVS: quot[ 7]= 390, quot_offset[ 7]= 100
  555. [    2.497532] c0     53 cpr3_msm8996_hmss_calculate_target_quoc0_cbf_corner: fused    NOM: quot[ 7]= 596, quot_offset[ 7]= 205
  556. [    2.509598] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused  TURBO: quot[ 7]= 911, quot_offset[ 7]= 315
  557. [    2.521807] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1peed bin = 1
  558. [    2.529218] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
  559. [    2.537637] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
  560. [    2.546230] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
  561. [    2.554476] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
  562. [    2.564114] c0     53 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  563. [    2.575035] c0     53 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
  564. [    2.590044] c0     53 cpr3_msm8996_hmss_calculate_open_loop_oop= 605000 uV
  565. [    2.600409] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    SVS: open-loop= 665000 uV
  566. [    2.610987] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    NOM: open-loop= 735000 uV
  567. [    2.621577] c0     53 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused  TURBO: open-loop= 930000 uV
  568. [    2.632311] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 365
  569. [    2.641979] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    SVS: quot[ 7]= 479, quot_offset[ 7]= 110
  570. [    2.653696] c0     53 cpr3_msm8996_hmss_calculate_target_quo: apc1_corner: fused    NOM: quot[ 7]= 640, quot_offset[ 7]= 160
  571. [    2.665414] c0     53 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused  TURBO: quot[ 7]=1074, quot_offset[ 7]= 430
  572. [    2.677620] cpr3_regulator_init_ctrl: apcc: Default CPR modeclosed-loop
  573. [    2.684220] c0     53 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
  574. [    2.690188] c0     53 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
  575. [    2.698179] c0     53 cpr3_regulator_measure_aging: apcc: average quotient delta=-18 (count=10)
  576. [    2.705890] c0     53 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
  577. [    2.717569] c0     53 apc1_corner: 0 <--> 0 mV at 0 mV
  578. [    2.724359] c0     53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 1
  579. [    2.730894] c0     53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
  580. [    2.739196] c0     53 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
  581. [    2.747770] c0     53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
  582. [    2.757909] c0     53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
  583. [    2.768496] c0     53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 785000 uV
  584. [    2.779087] c0     53 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
  585. [    2.789852] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
  586. [    2.796419] c0     53 gfx_corner: 0 <--> 0 mV at 0 mV
  587. [    2.806668] c0     53 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  588. [    2.812553] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  589. [    2.821445] c0     53 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  590. [    2.832123] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  591. [    2.845101] c0     53 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
  592. [    2.851083] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  593. [    2.860025] c0     53 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  594. [    2.870512] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  595. [    2.880070] c0     53 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  596. [    2.886031] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  597. [    2.895026] c0     53 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  598. [    2.905431] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  599. [    2.914938] c0     53 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
  600. [    2.920923] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  601. [    2.929857] c0     53 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  602. [    2.940154] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  603. [    2.949948] c0     53 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
  604. [    2.955914] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  605. [    2.964920] c0     53 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  606. [    2.975111] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  607. [    2.984923] c0     53 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
  608. [    2.996098] c0     53 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu0
  609. [    3.002929] c0     53 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu0
  610. [    3.010742] c0     53 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu1
  611. [    3.018434] c0     53 clock-cpu-8996: set OPP pair (1593600000 Hz, 780000 uv) on cpu1
  612. [    3.026239] c0     53 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
  613. [    3.033947] c0     53 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu2
  614. [    3.041742] c0     53 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
  615. [    3.049476] c0     53 clock-cpu-8996: set OPP pair (2150400000 Hz, 905000 uv) on cpu3
  616. [    3.057398] c0     53 clock-cpu-8996: set OPP pair (192000000 Hz, 540000 uv) on soc:qcom,m4m
  617. [    3.065709] c0     53 clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
  618. [    3.074596] c0     53 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
  619. [    3.081478] c0     53 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
  620. [    3.090277] c0     53 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 880000 uV) on b00000.qcom,kgsl-3d0
  621. [    3.100797] c0     53 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
  622. [    3.107334] c0     53 pmi8994_boost_5v: no parameters
  623. [    3.112241] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
  624. [    3.123410] c0     53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
  625. [    3.132408] c0     53 pmi8994_boost_pin_ctrl: no parameters
  626. [    3.137807] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
  627. [    3.149788] c0     53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
  628. [    3.160222] c0     53 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  629. [    3.174287] c0     53 msm-thermal 70000.qcom,msm-thermal: ms-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  630. [    3.188476] c0     53 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
  631. [    3.196898] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  632. [    3.210961] c0     53 msm-thermal 70000.qcom,msm-thermal: pr/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  633. [    3.225727] c0     53 msm_thermal:update_cpu_freq Unable to e policy for cpu:0. err:-19
  634. [    3.233796] c0     53 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
  635. [    3.242222] c0     53 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
  636. [    3.250638] c0     53 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
  637. [    3.266201] c0      4 msm_thermal:update_cpu_freq Unable to [    3.273703] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
  638. [    3.282042] c0      4 msm_thermal:update_cpu_freq Unable to 19
  639. [    3.290682] c0     53 pmi8994_boost_5v: no parameters
  640. [    3.295637] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
  641. [    3.306807] c0     53 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
  642. [    3.315765] c0     53 pmi8994_boost_pin_ctrl: no parameters
  643. [    3.321184] c0     53 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
  644. [    3.333164] c0     53 rpm_vreg_device_probe: regulator_regisd: pmi8994_boost_pin_ctrl, rc=-517
  645. [    3.389505] c0      1 KPI: Bootloader start count = 38796
  646. [    3.393961] c0      1 KPI: Bootloader end count = 2593695
  647. [    3.399274] c0      1 KPI: Bootloader display count = 66118
  648. [    3.404823] c0      1 KPI: Bootloader load kernel count = 209757456
  649. [    3.411627] c0      1 KPI: Kernel MPM timestamp = 2741658
  650. [    3.416457] c0      1 KPI: Kernel MPM Clock frequency = 32768
  651. [    3.422216] c0      1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536
  652. [    3.422216] c0      1  accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=2834802767 num_pmics=2
  653. [    3.446179] c0      1 gdsc_mmagic_bimc: no parameters
  654. [    _vreg: no parameters
  655. [    3.455709] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
  656. [    3.464076] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  657. [    3.472249] c0      1 rome_vreg: no parameters
  658. [    3.478987] c0      1 SCSI subsystem initialized
  659. [    3.483910] c0      1 usbcore: registered new interface driver usbfs
  660. [    3.489336] c0      1 usbcore: registered new interface driver hub
  661. [    3.495549] c0      1 usbcore: registered new device driver usb
  662. [    3.501823] c0      1 soc:usb_nop_phy supply vcc not found, using dummy regulator
  663. [    3.509659] c0      1 media: Linux media interface: v0.10
  664. [    3.514794] c0      1 Linux video capture interface: v2.00
  665. [    3.522082] c0      1 cpufreq: driver msm up and running
  666. [    3.527868] c0      1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
  667. [    3.537269] c0      1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
  668. [    3.546945] c0      1 ION heap system created
  669. [    3.550585] c0      1 ion_heap_create: Heap type is disabled: 1
  670. [    3.556328] c0      1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
  671. [    3.566458] c0      1 ION heap adsp created at 0x0000000000000000 with size 2000000
  672. [    3.573741] c0      1 ION heap qsecom created at 0x0000000000000000 with size 1400000
  673. [    3.581551] c0      1 ION heap secure_display created at 0x0000000000000000 with size 5c00000
  674. [    3.590055] c0      1 ION heap secure_heap created
  675. [    3.595797] c0      1 msm_bus_fabric_init_driver
  676. [    3.603540] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
  677. [    3.610809] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
  678. [    3.623171] c0      1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
  679. [    3.631361] c0      1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
  680. [    3.646186] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  681. [    3.654743] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  682. [    3.664280] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  683. [    3.674300] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  684. [    3.683313] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  685. [    3.692765] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  686. [    3.702227] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  687. [    3.711686] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  688. [    3.721150] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  689. [    3.730927] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
  690. [    3.742866] c0      1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  691. [    3.753269] c0      1 qcom,qpnp-power-on qpnp-power-on-2: PM@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  692. [    3.766233] c0      1 input: qpnp_pon as /devices/virtual/in 3.773276] c0      1 pon_spare_reg: no parameters
  693. [    3.777420] c0      1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
  694. [    3.785394] c0      1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
  695. [    3.797943] c0      1 qcom,qpnp-power-on qpnp-power-on-11: P reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  696. [    3.811049] c0      1 PMIC@SID0: PM8994 v2.0 options: 0, 0, , 2
  697. [    3.816951] c0      1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
  698. [    3.824510] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
  699. [    3.830748] c0      1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
  700. [    3.838001] c0      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
  701. [    3.846581] sps:BAM 0x0000000000000000 is registered.
  702. [    3.851625] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
  703. [    3.858284] c0      1 sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
  704. [    3.870021] c1      1 ipa ipa2_uc_state_check:296 uC interface not initialized
  705. [    3.884940] c1      1 ipa ipa2_uc_state_check:296 uC interface not initialized
  706. [    3.893953] c1      1 IPA driver initialization was successful.
  707. [    3.900437] c1      1 gdsc_mmagic_video: no parameters
  708. [    3.905068] c1      1 gdsc_mmagic_mdss: no parameters
  709. [    3.909905] c1      1 gdsc_mmagic_camss: no parameters
  710. [    3.915108] c1      1 gdsc_venus: no parameters
  711. [    3.919303] c1      1 gdsc_venus: supplied by gdsc_mmagic_video
  712. [    3.925425] c1      1 gdsc_venus_core0: fast normal
  713. [    3.930432] c1      1 gdsc_venus_core1: fast normal
  714. [    3.935387] c1      1 gdsc_camss_top: no parameters
  715. [    3.939952] c1      1 gdsc_camss_top: supplied by gdsc_mmagic_camss
  716. [    3.946636] c1      1 gdsc_vfe0: no parameters
  717. [    3.950641] c1      1 gdsc_vfe0: supplied by gdsc_camss_top
  718. [    3.956413] c1      1 gdsc_vfe1: no parameters
  719. [    3.960607] c1      1 gdsc_vfe1: supplied by gdsc_camss_top
  720. [    3.966394] c1      1 gdsc_mdss: no parameters
  721. [    3.970587] c1      1 gdsc_mdss: supplied by gdsc_mmagic_mdss
  722. [    3.976674] c1      1 gdsc_jpeg: no parameters
  723. [    3.980744] c1      1 gdsc_jpeg: supplied by gdsc_camss_top
  724. [    3.986545] c1      1 gdsc_cpp: no parameters
  725. [    3.990636] c1      1 gdsc_cpp: supplied by gdsc_camss_top
  726. [    3.996404] c1      1 gdsc_pcie_0: no parameters
  727. [    4.000846] c1      1 gdsc_pcie_1: no parameters
  728. [    4.005440] c1      1 gdsc_pcie_2: no parameters
  729. [    4.010027] c1      1 gdsc_usb30: no parameters
  730. [    4.014549] c1      1 gdsc_ufs: no parameters
  731. [    4.019171] c1      1 gdsc_fd: no parameters
  732. [    4.023012] c1      1 gdsc_fd: supplied by gdsc_camss_top
  733. [    4.028593] c1      1 gdsc_gpu: no parameters
  734. [    4.032992] c1      1 gdsc_gpu_gx: no parameters
  735. [    4.037688] c1      1 gdsc_gpu_gx: supplied by gfx_corner
  736. [    4.043156] c1      1 gdsc_hlos1_vote_aggre0_noc: no parameters
  737. [    4.048799] c1      1 gdsc_hlos1_vote_lpass_adsp: no parameters
  738. [    4.054652] c1      1 gdsc_hlos1_vote_lpass_core: no parameters
  739. [    4.060561] c1      1 gdsc_aggre0_noc: no parameters
  740. [    4.067922] c1      1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  741. [    4.073483] c1      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
  742. [    4.084475] c1      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
  743. [    4.092393] c1      1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
  744. [    4.098602] c1      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
  745. [    4.108116] c1      1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
  746. [    4.115334] c1      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
  747. [    4.123531] c1      1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
  748. [    4.129763] c1      1 mdss_pll_probe: Unable to get the cell-index rc=-22
  749. [    4.285714] c2      1 Advanced Linux Sound Architecture Driver Initialized.
  750. [    4.292405] Bluetooth: 0000000000000000
  751. [    4.295307] c2      1 NET: Registered protocol family 31
  752. [    4.300770] Bluetooth: 0000000000000000
  753. [    4.304415] c2      1 Bluetooth: 0000000000000000Bluetooth: 0000000000000000
  754. [    4.311453] c2      1 Bluetooth: 0000000000000000[    4.316615] c2     24 cfg80211: Calling CRDA to update world regulatory domain
  755. [    4.323362] c2     24 cfg80211: World regulatory domain upda[    4.323523] c3      1 pcie:pcie_init.
  756. [    4.327069] c3      1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
  757. [    4.331267] c3      1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
  758. [    4.333999] c1     53 pmi8994_boost_5v: no parameters
  759. [    4.334249] c1     53 pmi8994_boost_5v: supplied by pon_spare_reg
  760. [    4.334647] c1     53 pmi8994_boost_pin_ctrl: no parameters
  761. [    4.334781] c1     53 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
  762. [    4.335344] c1     53 ibb_reg: 4600 <--> 6000 mV at 5500 mV
  763. [    4.335799] c1     53 lab_reg: 4600 <--> 6000 mV at 5500 mV
  764. [    4.336450] c1     53 usb_otg_vreg: no parameters
  765. [    4.336562] c1     53 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
  766. [    4.336664] c1     53 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  767. [    4.337414] c3      1 Switched to clocksource arch_sys_counter
  768. [    4.364597] c3      1 bcl_peripheral:bcl_perph_init BCL Initialized
  769. [    4.371535] c3      1 NET: Registered protocol family 2
  770. [    4.421313] cfg80211:  DFS Master region: unset
  771. [    4.425591] c2     24 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  772. [    4.436185] c2     24 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  773. [    4.445031] c2     24 cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  774. [    4.453887] c2     24 cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  775. [    4.462741] c2     24 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  776. [    4.471596] c2     24 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  777. [    4.480449] c2     24 cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  778. [    4.489302] c2     24 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  779. [    4.498166] c2     24 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  780. [    4.507595] c3      1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  781. [    4.515264] c3      1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  782. [    4.523015] c3      1 TCP: Hash tables configured (established 32768 bind 32768)
  783. [    4.530122] c3      1 TCP: reno registered
  784. [    4.534118] c3      1 UDP hash table entries: 2048 (order: 4, 65536 bytes)
  785. [    4.540978] c3      1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  786. [    4.548638] c3      1 NET: Registered protocol family 1
  787. [    4.554481] c1     60 usb_otg_vreg: no parameters
  788. [    4.558343] c1     60 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
  789. [    4.566103] c1     60 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  790. [    4.575073] c3      1 Trying to unpack rootfs image as initramfs...
  791. [    4.595418] c3      1 Freeing initrd memory: 984K
  792. [    4.601390] c3      1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
  793. [    4.612676] c2      1 futex hash table entries: 1024 (order: 5, 131072 bytes)
  794. [    4.618926] c2      1 Initialise system trusted keyring
  795. [    4.624773] c2      1 vmscan: error setting kswapd cpu affinity mask
  796. [    4.633167] c2      1 VFS: Disk quotas dquot_6.5.2
  797. [    4.637017] c2      1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  798. [    4.645096] c2      1 Registering sdcardfs 0.1
  799. [    4.649075] c2      1 fuse init (API version 7.23)
  800. [    4.653630] c2      1 msgmni has been set to 7351
  801. [    4.660074] c2      1 Key type asymmetric registered
  802. [    4.664028] c2      1 Asymmetric key parser 'x509' registered
  803. [    4.669747] c2      1 Key type pkcs7_test registered
  804. [    4.674857] c2      1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  805. [    4.682951] c2      1 io scheduler noop registered
  806. [    4.687715] c2      1 io scheduler deadline registered
  807. [    4.692898] c2      1 io scheduler cfq registered (default)
  808. [    4.698392] c2      1 io scheduler test-iosched registered
  809. [    4.715846] c2      1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  810. [    4.723136] c2      1 No change in context(0==0), skip
  811. [    4.728299] c2      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
  812. [    4.736403] c2      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
  813. [    4.745512] c2      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
  814. [    4.754625] c2      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
  815. [    4.764010] c2      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
  816. [    4.773113] c2      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
  817. [    4.782313] c2      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
  818. [    4.791515] c2      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
  819. [    4.800901] c2      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
  820. [    4.810092] c2      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
  821. [    4.819386] c2      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
  822. [    4.828755] c2      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
  823. [    4.838132] c2      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  824. [    4.848074] c2      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  825. [    4.858372] c2      1 xlog_status: enable:1, panic:1, dump:2
  826. [    4.863794] c2      1 OF: no ranges; cannot translate
  827. [    4.868608] c2      1 OF: no ranges; cannot translate
  828. [    4.874349] c2      1 OF: no ranges; cannot translate
  829. [    4.878680] c2      1 OF: no ranges; cannot translate
  830. [    4.883827] c2      1 OF: no ranges; cannot translate
  831. [    4.888744] c2      1 OF: no ranges; cannot translate
  832. [    4.893912] c2      1 OF: no ranges; cannot translate
  833. [    4.898816] c2      1 OF: no ranges; cannot translate
  834. [    4.904016] c2      1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
  835. [    4.916035] c2      1 mdss_rotator_init_queue: work thread name=rot_thread_0
  836. [    4.922315] c2      1 mdss_rotator_init_queue: work thread name=rot_thread_1
  837. [    4.932706] c2      1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
  838. [    4.940432] c2      1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
  839. [    4.949003] c2      1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
  840. [    4.957575] c2      1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
  841. [    4.968969] c2      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  842. [    4.975154] c2      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
  843. [    4.993064] c2      1 mdss_dsi_panel_init: Panel Name = M1 Wpanel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
  844. [    5.013974] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qd
  845. [    5.022567] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
  846. [    5.031151] c2      1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
  847. [    5.038661] c2      1 mdss_dsi_parse_panel_features: partial_update_enabled=0
  848. [    5.045742] c2      1 mdss_dsi_parse_panel_features: ulps feature disabled
  849. [    5.052594] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  850. [    5.059711] c2      1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
  851. [    5.067440] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  852. [    5.075977] c2      1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
  853. [    5.081410] c2      1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
  854. [    5.086878] c2      1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
  855. [    5.092347] c2      1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
  856. [    5.097816] c2      1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
  857. [    5.104646] c2      1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
  858. [    5.114898] c2      1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
  859. [    5.121900] c2      1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
  860. [    5.129605] c2      1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  861. [    5.142175] c2      1 mdss_dsi_retrieve_ctrl_resources: ctrl0000000 ctrl_size=400 phy_base=0000000000000000 phy_size=588
  862. [    5.154542] c2      1 dsi_panel_device_register: Continuous splash enabled
  863. [    5.161790] c2      1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
  864. [    5.192034] c2      1 ERR_FG request IRQ
  865. [    5.195202] c2      1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
  866. [    5.204650] c2      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  867. [    5.211146] c2      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
  868. [    5.229050] c2      1 mdss_dsi_panel_init: Panel Name = M1 Wpanel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (0000000000000000)
  869. [    5.249968] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qd
  870. [    5.258551] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
  871. [    5.267196] c2      1 mdss_dsi_parse_panel_features: partial_update_enabled=0
  872. [    5.274264] c2      1 mdss_dsi_parse_panel_features: ulps feature disabled
  873. [    5.281120] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  874. [    5.288247] c2      1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
  875. [    5.295967] c2      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  876. [    5.304503] c2      1 mdss_dsi_parse_rgb_gain: PA[0] = 0x0
  877. [    5.309937] c2      1 mdss_dsi_parse_rgb_gain: PA[1] = 0x0
  878. [    5.315406] c2      1 mdss_dsi_parse_rgb_gain: PA[2] = 0x0
  879. [    5.320875] c2      1 mdss_dsi_parse_rgb_gain: PA[3] = 0x0
  880. [    5.326344] c2      1 mdss_dsi_parse_rgb_gain: R = 0x0, G = 0x0 B = 0x0
  881. [    5.333190] c2      1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20
  882. [    5.343429] c2      1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
  883. [    5.350427] c2      1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
  884. [    5.358131] c2      1 mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  885. [    5.370702] c2      1 mdss_dsi_retrieve_ctrl_resources: ctrl0000000 ctrl_size=400 phy_base=0000000000000000 phy_size=558
  886. [    5.382870] c2      1 dsi_panel_device_register: Continuous splash enabled
  887. [    5.390339] c2      1 panel_debug_register_base: debugfs_create_file: data_type fail
  888. [    5.397857] c2      1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
  889. [    5.407828] c2      1 mdss_dsi_status_init: DSI status check interval:3000
  890. [    5.414076] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  891. [    5.421482] c2      1 hdmi_tx_get_dt_data:4355 Unable to read qcom,display-id, data=0000000000000000,len=0
  892. [    5.431061] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  893. [    5.438759] c2      1 hdmi_tx_pinctrl_init: failed to get pinctrl
  894. [    5.444848] c2      1 hdmi_tx_init_resource: 'core_physical': start = 0x0000000000000000, len=0x50c
  895. [    5.453867] c2      1 hdmi_tx_init_resource: 'qfprom_physical': start = 0x0000000000000000, len=0x6158
  896. [    5.463239] c2      1 hdmi_tx_init_resource: 'hdcp_physical': start = 0x0000000000000000, len=0xfff
  897. [    5.473175] c2      1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
  898. [    5.482539] c2      1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
  899. [    5.491845] c2      1 mdss_fb_probe: fb0: split_mode:2 left:720 right:720
  900. [    5.498400] c2      1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
  901. [    5.506982] c2      1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
  902. [    5.512552] c2      1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
  903. [    5.520700] c2      1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
  904. [    5.532776] c2      1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
  905. [    5.538461] c2      1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
  906. [    5.546240] c2      1 mdss_mdp_splash_parse_dt: splash mem child node is not present
  907. [    5.556816] c2      1 scm_call failed: func id 0x42000c23, ret: -2, syscall returns: 0xfffffffffffffff0, 0x0, 0x0
  908. [    5.566090] c2      1 msm-dcc 4b3000.dcc: Falied to unlock DCC XPU.
  909. [    5.572323] c2      1 msm-dcc: probe of 4b3000.dcc failed with error -22
  910. [    5.593281] c3      1 In memshare_probe, Memshare probe success
  911. [    5.600071] c3      1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file    fail
  912. [    5.606659] c3      1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12
  913. [    5.619003] c3      1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
  914. [    5.626779] c3      1 msm_rpm_log_probe: OK
  915. [    5.631183] c3      1 RPM Version: 148.0.5
  916. [    5.637896] c3      1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
  917. [    5.646595] c3      1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped.
  918. [    5.658142] c3      1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
  919. [    5.667743] c3      1 uart_tx_gpio is not available
  920. [    5.671647] c3      1 uart_rx_gpio is not available
  921. [    5.676459] c3      1 uart_cts_gpio is not available
  922. [    5.681409] c3      1 uart_rfr_gpio is not available
  923. [    5.687295] c3      1 sps: BAM device 0x0000000000000000 is not registered yet.
  924. [    5.693790] sps:BAM 0x0000000000000000 is registered.
  925. [    5.700102] c3      1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
  926. [    5.711467] c3      1 msm_serial_hs module loaded
  927. [    5.716019] c3      1 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  928. [    5.721694] c3      1 AXI: get_pdata(): Error: Client name not found
  929. [    5.727987] c3      1 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
  930. [    5.738317] c3      1 msm_serial_hsl_probe: Bus scaling is disabled
  931. [    5.744678] c3      1 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800⸮[    5.754016] c3      1 msm_hsl_console_setup: console setup on port #0
  932. [    5.759478] c3      1 console [ttyHSL0] enabled
  933. [    5.7594[    5.768447] c3      1 bootconsole [uart0] disabled
  934. [    5.768447] c3      1 bootconsole [uart0] disabled
  935. [    5.779210] c3      1 msm_serial_hsl_init: driver initialized
  936. [    5.797561] c3      1 kgsl: use zap firmware : a530_zap_signed
  937. [    5.842317] c3      1 brd: module loaded
  938. [    5.846639] c3      1 loop: module loaded
  939. [    5.849832] c3      1 zram: Created 1 device(s) ...
  940. [    5.855594] c3      1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
  941. [    5.861824] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
  942. [    5.868473] c3      1 QSEECOM: qseecom_probe: no-clock-support=0x1[    5.874635] c3      1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
  943. [    5.882560] c3      1 QSEECOM: qseecom_probe: qseecom.whitel[    5.893473] c3      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active
  944. [    5.900220] c3      1 fpc1020 soc:fp_fpc1020: found pin contt
  945. [    5.907838] c3      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active
  946. [    5.915416] c3      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset'
  947. [    5.922427] c3      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active'
  948. [    5.929661] c3      1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok
  949. [    5.937052] c3      1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
  950. [    5.943739] c3      1 i2c-core: driver [tabla-i2c-core] using legacy resume method
  951. [    5.951284] c3      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  952. [    5.959052] c3      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  953. [    5.966813] c3      1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
  954. [    5.974423] c3      1 i2c-core: driver [tasha-i2c-core] using legacy resume method
  955. [    5.983648] c3      1 [NFC] pn551_dev_init: Loading pn551 driver
  956. [    5.988750] c3      1 [NFC] pn551_probe:
  957. [    5.992652] c3      1 [NFC] pn551_probe : vreg_l6 regulator_get
  958. [    5.998456] c3      1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage
  959. [    6.005040] c3      1 [NFC] pn551_probe : vreg_l6 regulator_enable
  960. [    6.011199] c3      1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1
  961. [    6.018057] c3      1 [NFC] pn551_parse_dt: Start
  962. [    6.022745] [NFC] pn551_parse_dt:ven_isinvert = 0
  963. [    6.027255] c3      1 [NFC] pn551_parse_dt: chk irq-gpio
  964. [    6.032911] c3      1 [NFC] pn551_parse_dt: chk ven-gpio
  965. [    6.038037] c3      1 [NFC] pn551_parse_dt: chk fwdl-gpio
  966. [    6.043417] c3      1 [NFC] pn551_parse_dt: chk nfc_i2c pins
  967. [    6.049090] c3      1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
  968. [    6.057047] c3      1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
  969. [    6.065631] c3      1 [NFC] pn551_probe : irq_gpio set input 0
  970. [    6.071533] c3      1 [NFC] pn551_probe : ven_gpio set 0 0
  971. [    6.077087] c3      1 [NFC] pn551_probe : firm_gpio set 0 0
  972. [    6.082726] c3      1 [NFC] pn551_probe: init io_wake_lock
  973. [    6.088381] c3      1 [NFC] pn551_probe : requesting IRQ 405
  974. [    6.093967] c3      1 [NFC] pn551_probe: Turn off NFC VEN by default
  975. [    6.100175] c3      1 [NFC] pn551_Disable: gpio=12 set_value=0
  976. [    6.106001] c3      1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
  977. [    6.113278] c3      1 [NFC] pn551_probe: Probe success!
  978. [    6.118503] c3      1 i2c-core: driver [pn551] using legacy suspend method
  979. [    6.125347] c3      1 i2c-core: driver [pn551] using legacy resume method
  980. [    6.133359] c3      1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
  981. [    6.140225] c3      1 qce 660000.qcedev: CE device = 0x0
  982. [    6.140225] c3      1 , IO base, CE = 0x0000000000000000
  983. [    6.140225] c3      1 , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
  984. [    6.140225] c3      1 IO base BAM = 0x0000000000000000
  985. [    6.140225] c3      1 BAM IRQ 247
  986. [    6.140225] c3      1 Engines Availability = 0x2011053
  987. [    6.170978] sps:BAM 0x0000000000000000 is registered.
  988. [    6.175922] c3      1 sps:BAM 0x0000000000644000 (va:0xffffff80036c0000) enabled: ver:0x27, number of pipes:16
  989. [    6.186054] c3      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
  990. [    6.200492] c3      1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
  991. [    6.207821] c3      1 qcrypto 660000.qcrypto: CE device = 0x0
  992. [    6.207821] c3      1 , IO base, CE = 0x0000000000000000
  993. [    6.207821] c3      1 , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
  994. [    6.207821] c3      1 IO base BAM = 0x0000000000000000
  995. [    6.207821] c3      1 BAM IRQ 247
  996. [    6.207821] c3      1 Engines Availability = 0x2011053
  997. [    6.239179] c3      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
  998. [    6.250752] c3      1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
  999. [    6.255564] c3      1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
  1000. [    6.261280] c3      1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
  1001. [    6.267006] c3      1 qcrypto 660000.qcrypto: qcrypto-ecb-des
  1002. [    6.272737] c3      1 qcrypto 660000.qcrypto: qcrypto-cbc-des
  1003. [    6.278468] c3      1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
  1004. [    6.284314] c3      1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
  1005. [    6.290103] c3      1 qcrypto 660000.qcrypto: qcrypto-xts-aes
  1006. [    6.295828] c3      1 qcrypto 660000.qcrypto: qcrypto-sha1
  1007. [    6.301301] c3      1 qcrypto 660000.qcrypto: qcrypto-sha256
  1008. [    6.306967] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  1009. [    6.313990] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  1010. [    6.321004] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  1011. [    6.328153] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  1012. [    6.335344] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  1013. [    6.342554] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  1014. [    6.349833] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
  1015. [    6.355744] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
  1016. [    6.361804] c3      1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
  1017. [    6.367533] c3      1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
  1018. [    6.376744] c3      1 ICE IRQ = 30
  1019. [    6.379415] c3      1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
  1020. [    6.388370] c3      1 ICE IRQ = 31
  1021. [    6.396482] c3      1 qcom_ice_get_pdevice: found ice device 0000000000000000
  1022. [    6.402621] c3      1 qcom_ice_get_pdevice: matching platform device 0000000000000000
  1023. [    6.411015] c3      1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
  1024. [    6.421254] c3      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
  1025. [    6.429078] c3      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
  1026. [    6.438439] c3      1 scsi host0: ufshcd
  1027. [    6.445020] c3      1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0x0000000000000000
  1028. [    6.462693] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  1029. [    6.471542] c3      1 spi_master spi6: will run message pump with realtime priority
  1030. [    6.478281] c2     60 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  1031. [    6.483671] c3      1 sps:BAM 0x0000000007544000 (va:0xfffffed: ver:0x19, number of pipes:24
  1032. [    6.484388] c3      1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  1033. [    6.485320] c3      1 tun: Universal TUN/TAP device driver, 1.6
  1034. [    6.485321] c3      1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1035. [    6.485487] c3      1 PPP generic driver version 2.4.2
  1036. [    6.485643] c3      1 PPP BSD Compression module registered
  1037. [    6.485646] c3      1 PPP Deflate Compression module registered
  1038. [    6.485674] c3      1 PPP MPPE Compression module registered
  1039. [    6.485681] c3      1 NET: Registered protocol family 24
  1040. [    6.518894] c3      1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
  1041. [    6.522539] c3      1 msm_pcie_enable: PCIe RC0 PHY is ready!
  1042. [    6.532628] c3      1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
  1043. [    6.574587] c3      1 msm_pcie_enable: PCIe RC0 link initialized
  1044. [    6.579668] c3      1 PCI host bridge /soc/qcom,pcie@00600000 ranges:
  1045. [    6.585996] c3      1   No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
  1046. [    6.594165] c3      1    IO 0x0c200000..0x0c2fffff -> 0x0c200000
  1047. [    6.600142] c3      1   MEM 0x0c300000..0x0cffffff -> 0x0c300000
  1048. [    6.616268] c3      1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
  1049. [    6.622462] c3      1 pci_bus 0000:00: root bus resource [bus 00-ff]
  1050. [    6.628794] c3      1 pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
  1051. [    6.639035] c3      1 pci_bus 0000:00: root bus resource [mem 0x00000000-0x00cfffff]
  1052. [    6.646894] c3      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
  1053. [    6.654456] c3      1 pci 0000:00:00.0: IOMMU is currently not supported for PCI
  1054. [    6.661884] c3      1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
  1055. [    6.669075] c3      1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  1056. [    6.678069] c3      1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
  1057. [    6.685546] c3      1 pci 0000:01:00.0: IOMMU is currently not supported for PCI
  1058. [    6.693446] c3      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
  1059. [    6.700433] c3      1 pci 0000:00:00.0: BAR 8: assigned [mem 0x00000000-0x001fffff]
  1060. [    6.708050] c3      1 pci 0000:00:00.0: BAR 0: assigned [mem 0x00000000-0x00000fff 64bit]
  1061. [    6.716296] c3      1 pci 0000:01:00.0: BAR 0: assigned [mem 0x00000000-0x001fffff 64bit]
  1062. [    6.724692] c3      1 pci 0000:00:00.0: PCI bridge to [bus 00]
  1063. [    6.730254] c3      1 pci 0000:00:00.0:   bridge window [mem 0x00000000-0x001fffff]
  1064. [    6.739500] c3      1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
  1065. [    6.757947] c3      1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
  1066. [    6.766869] c3      1 cnss: Platform driver probed successfully.
  1067. [    6.773066] c3      1 CLD80211: Initializing
  1068. [    6.776460] c3      1 usbcore: registered new interface driver rtl8150
  1069. [    6.782836] c3      1 usbcore: registered new interface driver r8152
  1070. [    6.789182] c3      1 usbcore: registered new interface driver asix
  1071. [    6.795422] c3      1 usbcore: registered new interface driver ax88179_178a
  1072. [    6.802368] c3      1 usbcore: registered new interface driver cdc_ether
  1073. [    6.809310] c3      1 usbcore: registered new interface driver cdc_ncm
  1074. [    6.816114] c3    107 msm_sharedmem: sharedmem_register_qmi: qmi init successful
  1075. [    6.817691] c2     60 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  1076. [    6.818287] c2     60 scsi 0:0:0:49488: Well-known LUN    SABG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1077. [    6.819236] c2     60 scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1078. [    6.819899] c2     60 scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1079. [    6.820695] c1    273 scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1080. [    6.821476] c1    273 scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1081. [    6.821966] c1    273 scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1082. [    6.822536] c1    273 scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1083. [    6.823057] c1    273 scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1084. [    6.823546] c1    273 scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  0800 PQ: 0 ANSI: 6
  1085. [    6.824537] c0     60 sd 0:0:0:0: [sda] 16384-byte physical blocks
  1086. [    6.825123] c0     59 sd 0:0:0:1: [sdb] 16384-byte physical blocks
  1087. [    6.827455] c1    273 sd 0:0:0:2: [sdc] 16384-byte physical blocks
  1088. [    6.829500] c1    274 sd 0:0:0:4: [sde] 16384-byte physical blocks
  1089. [    6.829503] c0     53 sd 0:0:0:3: [sdd] 16384-byte physical blocks
  1090. [    6.831758] c1     59  sdb: sdb1
  1091. [    6.832940] c0     60  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36
  1092. [    6.833563] c0    275 sd 0:0:0:5: [sdf] 16384-byte physical
  1093. [    6.838503] c0    273  sdc: sdc1
  1094. [    6.839675] c2      1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  1095. [    6.840020] c0    274  sde: sde1 sde2 sde3 sde4 sde5 sde6
  1096. [    6.842615] c0    275  sdf: sdf1 sdf2 sdf3 sdf4 sdf5
  1097. [    6.842651] c2      1 rtel: rtel_probe: Device created for client 'rtel'
  1098. [    6.849315] c2      1 msm-dwc3 6a00000.ssusb: unable to get dbm device
  1099. [    6.852748] c2      1 usbcore: registered new interface driver usb-storage
  1100. [    6.852838] c2      1 usbcore: registered new interface driver usbserial
  1101. [    6.852861] c2      1 usbcore: registered new interface driver usb_ehset_test
  1102. [    6.853636] c2      1 gbridge_init: gbridge_init successs.
  1103. [    6.855510] c2      1 9-0022 supply vbus not found, using dummy regulator
  1104. [    6.856391] c2      1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
  1105. [    6.860417] c2      1 mousedev: PS/2 mouse device common for all mice
  1106. [    6.860680] c2      1 usbcore: registered new interface driver xpad
  1107. [    6.861526] c2      1 [TP]: parse_config
  1108. [    6.896202] c0      1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
  1109. [    6.897629] c0      1 [TP]:check_chip_exist: Synaptics chip exist
  1110. [    6.907948] c0      1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
  1111. [    6.908579] c0      1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
  1112. [    6.908829] c0      1 [TP]:synaptics_rmi4_f12_init report data init done
  1113. [    6.916829] c1      1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
  1114. [    6.917749] c1      1 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
  1115. [    6.918240] c1      1 input: synaptics_dsxv26 as /devices/so2c/i2c-3/3-0020/input/input2
  1116. [    6.918665] c1      1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
  1117. [    6.920047] c1      1 [LASER] stmvl53l0_init: Enter
  1118. [    6.920051] c1      1 [LASER] stmvl53l0_init_i2c: Enter
  1119. [    6.920736] c1      1 [LASER] stmvl53l0_probe: Enter++
  1120. [    6.920872] c1      1 [LASER] Laser_parse_dt: pwdn_gpio = 94
  1121. [    6.921035] c1      1 [LASER] Laser_parse_dt: laser_irq_gpio = 62
  1122. [    6.921052] c1      1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768
  1123. [    6.921056] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67
  1124. [    6.921057] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00
  1125. [    6.921059] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 05
  1126. [    6.921060] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 17
  1127. [    6.921061] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67
  1128. [    6.921063] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00
  1129. [    6.921064] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 03
  1130. [    6.921065] c1      1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00
  1131. [    6.921067] c1      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 23
  1132. [    6.921069] c1      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x3
  1133. [    6.921070] c1      1 [LASER] Laser_parse_dt: Update SpadCount = 5 and IsAperture = 0
  1134. [    6.921072] c1      1 [LASER] stmvl53l0_parse_vdd: Enter++
  1135. [    6.921130] c1      1 12-0029 supply vdd not found, using dummy regulator
  1136. [    6.921176] c1      1 [LASER] stmvl53l0_parse_vdd: End--
  1137. [    6.921177] c1      1 [LASER] Laser_pinctrl_init: Enter++
  1138. [    6.921752] c1      1 [LASER] Laser_pinctrl_init: End--
  1139. [    6.921756] c1      1 [LASER] stmvl53l0_setup: Enter++
  1140. [    6.921774] c1      1 [LASER] stmvl53l0_setup: register_irq: 417
  1141. [    6.922147] c1      1 [LASER] stmvl53l0_setup: interrupt is hooked
  1142. [    6.922371] c1      1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input3
  1143. [    6.922489] c1      1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029
  1144. [    6.923243] c1      1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
  1145. [    6.923601] c1      1 [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10
  1146. [    6.923601] c1      1  API_VERSION: 1.1.20.2
  1147. [    6.923601] c1      1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1
  1148. [    6.923608] c1      1 [LASER] stmvl53l0_init_client: Enter
  1149. [    6.923609] c1      1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit
  1150. [    6.931294] c1      1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit
  1151. [    6.994231] c1      1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 31 and PhaseCal = 1
  1152. [    6.995510] c1      1 [LASER] stmvl53l0_init_client: Set refSpadCount = 5 and isApertureSpads = 0
  1153. [    6.995687] c1      1 [LASER] stmvl53l0_init_client: Set offset = 23
  1154. [    6.996006] c1      1 [LASER] stmvl53l0_init_client: Set xtalk = 0x3
  1155. [    6.996008] c1      1 [LASER] stmvl53l0_init_client: Set RIT - 68
  1156. [    6.996010] c1      1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode
  1157. [    6.996375] c1      1 [LASER] stmvl53l0_init_client: End
  1158. [    6.996377] c1      1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled
  1159. [    6.996381] c1      1 [LASER] stmvl53l0_setup: End--
  1160. [    6.996381] c1      1 [LASER] stmvl53l0_probe: Success--
  1161. [    6.996466] c1      1 [LASER] stmvl53l0_init_i2c: End with rc:0
  1162. [    6.996468] c1      1 [LASER] stmvl53l0_init: End
  1163. [    6.998511] c2      1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
  1164. [    6.998751] c2      1 i2c /dev entries driver
  1165. [    6.999080] c2      1 [AUD] tfa9888: tfa9888_init
  1166. [    6.999129] c2      1 i2c-core: driver [tfa9888] using legacy suspend method
  1167. [    6.999130] c2      1 i2c-core: driver [tfa9888] using legacy resume method
  1168. [    7.031845] c2      1 vmem: Up and running with 4 banks of memory from [io  size 0x3f0826fdc9 64bit disabled]
  1169. [    7.050388] c2      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
  1170. [    7.050393] c2      1 msm_actuator_platform_probe:1954 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
  1171. [    7.050591] c2      1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
  1172. [    7.052426] c2      1 msm_eeprom_platform_probe failed 1673
  1173. [    7.053083] c2      1 msm_eeprom_platform_probe failed 1673
  1174. [    7.054799] c2      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
  1175. [    7.054802] c2      1 msm_ois_platform_probe:745 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
  1176. [    7.054997] c2      1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
  1177. [    7.059460] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  1178. [    7.064968] c2      1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
  1179. [    7.064973] c2      1 MSM-CPP cpp_init_hardware:881 stream_cnt:0
  1180. [    7.079224] c2      1 __msm_jpeg_init:1537] Jpeg Device id 0
  1181. [    7.079800] c2      1 __msm_jpeg_init:1537] Jpeg Device id 2
  1182. [    7.084522] c2      1 __msm_jpeg_init:1537] Jpeg Device id 3
  1183. [    7.084523] c2      1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
  1184. [    7.178905] c2      1 msm_fd aa4000.qcom,fd: Face detection halt timeout
  1185. [    7.180779] c2      1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
  1186. [    7.181128] c2      1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
  1187. [    7.183311] c2      1 htc_battery_init: can't find compatible 'htc,htc_battery_store'
  1188. [    7.185245] c2      1 [BATT] Probe process: (2, 1)
  1189. [    7.185270] c2      1 [BATT] htc_battery_init done.
  1190. [    7.185277] c1    277 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
  1191. [    7.186162] c1    273 [BATT] htc_battery_fb_register in
  1192. [    7.186162] c2      1 set restart reason = 0x776655AA
  1193. [    7.186166] c2      1 set restart msg = 'Unknown'
  1194. [    7.186610] c1    268 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038
  1195. [    7.187957] c2      1 unable to find DT imem DLOAD mode node
  1196. [    7.189872] c2      1 unable to find DT imem EDLOAD mode node
  1197. [    7.222589] c2      1 device-mapper: uevent: version 1.0.3
  1198. [    7.222831] c2      1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
  1199. [    7.222838] c2      1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
  1200. [    7.222838] c2      1
  1201. [    7.222848] c2      1 Bluetooth: 0000000000000000
  1202. [    7.224414] c2      1 Bluetooth: 0000000000000000
  1203. [    7.224414] c2      1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
  1204. [    7.224533] c2      1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
  1205. [    7.224535] c2      1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
  1206. [    7.224538] c2      1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
  1207. [    7.225040] c2      1 ------------[ cut here ]------------
  1208. [    7.225053] c2      1 WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/google/marlin/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
  1209. [    7.225054] c2      1 sysfs: cannot create duplicate filenamices/system/cpu/cpu0/cpufreq/stats'
  1210. [    7.225059] c2      1 Modules linked in:
  1211. [    7.225065] c2      1 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.70-Lineage-g54b61efe09a-dirty #42
  1212. [    7.225067] c2      1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
  1213. [    7.225071] c2      1 Call trace:
  1214. [    7.225082] c2      1 [<ffffffc00008ca08>] dump_backtrace+0x0/0x13c
  1215. [    7.225084] c2      1 [<ffffffc00008cdf4>] show_stack+0x14/0x1c
  1216. [    7.225094] c2      1 [<ffffffc000febcdc>] dump_stack+0x88/0xac
  1217. [    7.225098] c2      1 [<ffffffc0000adacc>] warn_slowpath_fmt+0xc8/0x100
  1218. [    7.225100] c2      1 [<ffffffc000270e74>] sysfs_warn_dup+0x64/0x84
  1219. [    7.225102] c2      1 [<ffffffc0002718b4>] internal_create_group+0x21c/0x22c
  1220. [    7.225104] c2      1 [<ffffffc0002718d8>] sysfs_create_group+0x14/0x1c
  1221. [    7.225114] c2      1 [<ffffffc0009381bc>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
  1222. [    7.225115] c2      1 [<ffffffc0017c43fc>] cpufreq_stats_init+0x188/0x330
  1223. [    7.225118] c2      1 [<ffffffc000082bb0>] do_one_initcall+0x98/0x1cc
  1224. [    7.225125] c2      1 [<ffffffc001783c54>] kernel_init_freeable+0x1d0/0x284
  1225. [    7.225128] c2      1 [<ffffffc000fe5f9c>] kernel_init+0x18/0x134
  1226. [    7.225194] c2      1 ---[ end trace 54b22d7dc2e21d37 ]---
  1227. [    7.225223] c2      1 ------------[ cut here ]------------
  1228. [    7.225226] c2      1 WARNING: CPU: 2 PID: 1 at ../../../../../../kernel/google/marlin/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x84()
  1229. [    7.225228] c2      1 sysfs: cannot create duplicate filenamices/system/cpu/cpu2/cpufreq/stats'
  1230. [    7.225229] c2      1 Modules linked in:
  1231. [    7.225231] c2      1 CPU: 2 PID: 1 Comm: swapper/0 Tainted: G        W      3.18.70-Lineage-g54b61efe09a-dirty #42
  1232. [    7.225232] c2      1 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
  1233. [    7.225233] c2      1 Call trace:
  1234. [    7.225235] c2      1 [<ffffffc00008ca08>] dump_backtrace+0x0/0x13c
  1235. [    7.225237] c2      1 [<ffffffc00008cdf4>] show_stack+0x14/0x1c
  1236. [    7.225239] c2      1 [<ffffffc000febcdc>] dump_stack+0x88/0xac
  1237. [    7.225241] c2      1 [<ffffffc0000adacc>] warn_slowpath_fmt+0xc8/0x100
  1238. [    7.225242] c2      1 [<ffffffc000270e74>] sysfs_warn_dup+0x64/0x84
  1239. [    7.225244] c2      1 [<ffffffc0002718b4>] internal_create_group+0x21c/0x22c
  1240. [    7.225246] c2      1 [<ffffffc0002718d8>] sysfs_create_group+0x14/0x1c
  1241. [    7.225248] c2      1 [<ffffffc0009381bc>] __cpufreq_stats_create_table.part.7+0x6c/0x1d4
  1242. [    7.225250] c2      1 [<ffffffc0017c43fc>] cpufreq_stats_init+0x188/0x330
  1243. [    7.225252] c2      1 [<ffffffc000082bb0>] do_one_initcall+0x98/0x1cc
  1244. [    7.225253] c2      1 [<ffffffc001783c54>] kernel_init_freeable+0x1d0/0x284
  1245. [    7.225255] c2      1 [<ffffffc000fe5f9c>] kernel_init+0x18/0x134
  1246. [    7.225256] c2      1 ---[ end trace 54b22d7dc2e21d38 ]---
  1247. [    7.229446] c2      1 hidraw: raw HID events driver (C) Jiri Kosina
  1248. [    7.229872] c2      1 usbcore: registered new interface driver usbhid
  1249. [    7.229872] c2      1 usbhid: USB HID core driver
  1250. [    7.230408] c2      1 ashmem: initialized
  1251. [    7.422497] c1    273 [TP]:fwu_start_reflash: Start of reflash process
  1252. [    7.422586] c1    273 [TP]: [ERR]:fwu_start_reflash: Firmware image synaptics_bl71.img not available
  1253. [    7.422588] c1    273 [TP]:fwu_start_reflash: End of reflash process
  1254. [    7.422590] c1    273 [TP]:synaptics_config_updater
  1255. [    7.423532] c1    273 [TP]:synaptics_config_updater: Device config ID = 4d31763200180000000000000000000000000000000000000000000000000000
  1256. [    7.423533] c1    273 [TP]:synaptics_config_updater: Start ofig process
  1257. [    7.476849] c1    273 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x2
  1258. [    7.476862] c1    273 [TP]:synaptics_config_updater: Image config ID = 4d31763200180000000000000000000000000000000000000000000000000000
  1259. [    7.476864] c1    273 [TP]:synaptics_config_updater: config_
  1260. [    7.476869] c1    273 [TP]: synaptics_config_updater: crc_cksum = 66A6880E
  1261. [    7.478513] c1    273 [TP]: crc_comparison_v7: config_crc = 66A6880E, flash_crc = 66A6880E
  1262. [    7.478515] c1    273 [TP]: synaptics_config_updater: No need to update
  1263. [    7.478534] c1    273 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x128/0xd38, rebuild = 0
  1264. [    7.508024] c1    273 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
  1265. [    7.508644] c1    273 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
  1266. [    7.508903] c1    273 [TP]:synaptics_rmi4_f12_init report data init done
  1267. [    7.516710] c1    273 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
  1268. [    7.517627] c1    273 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
  1269. [    7.523706] c1    273 [TP]:synaptics_config_updater: End of g process
  1270. [    7.523708] c1    273 [TP]: synaptics_config_updater end
  1271. [    7.933417] c2      1 nanohub: loaded; ret=0
  1272. [    7.933544] c2      1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
  1273. [    7.938678] c2      1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
  1274. [    7.940048] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
  1275. [    7.940076] c2      1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
  1276. [    7.942520] c2      1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
  1277. [    7.946405] c2      1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
  1278. [    7.946511] c2      1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
  1279. [    7.946606] c2      1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
  1280. [    7.946698] c2      1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
  1281. [    7.951639] c2      1 [NC] == NC_probe ==
  1282. [    7.951641] c2      1 [NC] Init GPIO pins
  1283. [    7.951947] c2      1 usbcore: registered new interface driver snd-usb-audio
  1284. [    7.953284] c2      1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
  1285. [    7.953314] c2      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
  1286. [    7.953675] c2      1 tfa98xx_i2c_probe(): TFA9891 detected
  1287. [    7.953686] c2      1 tfa98xx 7-0034: Skipping IRQ registration
  1288. [    7.953758] c2      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
  1289. [    7.954543] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  1290. [    7.954604] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
  1291. [    7.964778] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
  1292. [    7.965005] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
  1293. [    7.965010] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teustom tdm header not supported
  1294. [    7.965149] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
  1295. [    7.965154] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1296. [    7.965288] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
  1297. [    7.965292] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1298. [    7.965419] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
  1299. [    7.965423] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1300. [    7.965441] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
  1301. [    7.965634] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
  1302. [    7.965638] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-teustom tdm header not supported
  1303. [    7.965768] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
  1304. [    7.965772] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1305. [    7.965899] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
  1306. [    7.965903] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1307. [    7.966031] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
  1308. [    7.966034] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-te not supported
  1309. [    7.966051] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
  1310. [    7.966177] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
  1311. [    7.966181] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quustom tdm header not supported
  1312. [    7.966310] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
  1313. [    7.966313] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1314. [    7.966440] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
  1315. [    7.966444] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1316. [    7.966574] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
  1317. [    7.966578] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1318. [    7.966594] c2      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
  1319. [    7.966721] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
  1320. [    7.966725] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quustom tdm header not supported
  1321. [    7.966850] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
  1322. [    7.966854] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1323. [    7.966978] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
  1324. [    7.966982] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1325. [    7.967107] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
  1326. [    7.967111] c2      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-qu not supported
  1327. [    7.977574] c2      1 [AUD] snd_soc_msm8996: uart_gpios_init done
  1328. [    7.977577] c2      1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1329. [    7.977583] c2      1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1330. [    7.977619] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1331. [    7.977636] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1332. [    7.977652] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1333. [    7.977668] c2      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1334. [    7.977684] c2      1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1335. [    7.979114] c2      1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1336. [    7.981014] c2      1 GACT probability NOT on
  1337. [    7.981022] c2      1 Mirror/redirect action on
  1338. [    7.981034] c2      1 u32 classifier
  1339. [    7.981035] c2      1     Actions configured
  1340. [    7.981050] c2      1 Netfilter messages via NETLINK v0.30.
  1341. [    7.981055] c2      1 nfnl_acct: registering with nfnetlink.
  1342. [    7.981075] c2      1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  1343. [    7.981227] c2      1 ctnetlink v0.93: registering with nfnetlink.
  1344. [    7.981543] c2      1 xt_time: kernel timezone is -0000
  1345. [    7.981667] c2      1 ip_tables: (C) 2000-2006 Netfilter Core Team
  1346. [    7.981728] c2      1 arp_tables: (C) 2002 David S. Miller
  1347. [    7.981747] c2      1 TCP: cubic registered
  1348. [    7.981753] c2      1 Initializing XFRM netlink socket
  1349. [    7.981919] c2      1 NET: Registered protocol family 10
  1350. [    7.982378] c2      1 mip6: Mobile IPv6
  1351. [    7.982388] c2      1 ip6_tables: (C) 2000-2006 Netfilter Core Team
  1352. [    7.982450] c2      1 sit: IPv6 over IPv4 tunneling driver
  1353. [    7.982649] c2      1 NET: Registered protocol family 17
  1354. [    7.982659] c2      1 NET: Registered protocol family 15
  1355. [    7.982681] c2      1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  1356. [    7.982691] c2      1 Bridge firewalling registered
  1357. [    7.s v2.0 registered
  1358. [    7.982832] c2      1 Bluetooth: 0000000000000000
  1359. [    7.982860] c2      1 Bluetooth: 0000000000000000
  1360. [    7.982860] c2      1 l2tp_core: L2TP core driver, V2.0
  1361. [    7.982867] c2      1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
  1362. [    7.982869] c2      1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  1363. [    7.982880] c2      1 l2tp_netlink: L2TP netlink interface
  1364. [    7.982893] c2      1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  1365. [    7.982900] c2      1 l2tp_debugfs: L2TP debugfs support
  1366. [    7.982903] c2      1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  1367. [    7.983737] c2      1 NET: Registered protocol family 27
  1368. [    7.985380] c0    273 usb_otg_vreg: no parameters
  1369. [    7.985441] c0    273 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
  1370. [    7.985495] c0    273 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  1371. [    7.988050] c1    273 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
  1372. [    7.989202] c1    273 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
  1373. [    7.990894] c1    273 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
  1374. [    7.992070] c1    273 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
  1375. [    7.996309] c1    273 sps:BAM 0x0000000000000000 is registered.
  1376. [    7.996309] c1    273 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
  1377. [    7.996325] c1    273 SMBCHG: smbchg_check_chg_version: PMI8.1
  1378. [    7.996445] c1    273 smbcharger_charger_otg: no parameters
  1379. [    7.996542] c1    273 smbcharger_external_otg: no parameters
  1380. [    7.996568] c1    273 smbcharger_external_otg: supplied by pmi8994_boost_5v
  1381. [    7.996959] c1    273 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1382. [    7.996980] c1    273 SMBCHG: usb_suspend: 7 voting for 0 - off
  1383. [    7.997370] c1    273 SMBCHG: usb_suspend: 0 voting for 0 - off
  1384. [    7.997372] c1    273 SMBCHG: dc_suspend: 0 voting for 0 - off
  1385. [    7.997429] c1    273 SMBCHG: dcl_icl: 0 voting for 1500 - on
  1386. [    7.997466] c1    273 SMBCHG: fcc: 1 voting for 3200 - on
  1387. [    7.997638] c1    273 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
  1388. [    7.997640] c1    273 SMBCHG: hwaicl_disable: 0 voting for 0 - off
  1389. [    7.998116] c1     18 SMBCHG: smbchg_clean_tcc_WA_work: called before init
  1390. [    8.018986] c1    273 SMBCHG: hwaicl_disable: 1 voting for 0 - off
  1391. [    8.018988] c1    273 SMBCHG: usb_suspend: 6 voting for 0 - off
  1392. [    8.019048] c1    273 SMBCHG: usb_icl: 0 voting for 100 - on
  1393. [    8.019051] c1    273 SMBCHG: usb_suspend: 2 voting for 0 - off
  1394. [    8.019195] c1    273 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
  1395. [    8.021514] c1    273 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
  1396. [    8.021765] c1    273 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
  1397. [    8.042841] c1    365 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
  1398. [    8.045618] c1    365 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1399. [    8.045652] c1    365 SMBCHG: usb_icl: 0 voting for 0 - on
  1400. [    8.045655] c1    365 SMBCHG: usb_suspend: 2 voting for 0 - on
  1401. [    8.048488] c1    273 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
  1402. [    8.048498] c1    273 smbchg_debug_mask=0x6
  1403. [    8.048500] : rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
  1404. [    8.050405] c1    365 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1405. [    8.050411] c1    365 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1406. [    8.050413] c1    365 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1407. [    8.050416] c1    365 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1408. [    8.050455] c1    365 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1409. [    8.051822] c1    273 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
  1410. [    8.051823] c1    273 [BATT] Probe process: (0, 2)
  1411. [    8.0G: handle_usb_insertion: triggered
  1412. [    8.051895] c1    273 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
  1413. [    8.051896] c1    273 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
  1414. [    8.051898] c1    273 SMBCHG: usb_icl: 0 voting for 100 - on
  1415. [    8.051901] c1    273 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
  1416. [    8.051902] c1    273 SMBCHG: usb_suspend: 2 voting for 0 - off
  1417. [    8.051988] c1    273 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
  1418. [    8.052000] c0    386 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(-1) power_ok(1)
  1419. [    8.052006] c1    273 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
  1420. [    8.052081] c1    346 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1421. [    8.052084] c1    346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1422. [    8.052085] c1    346 SMBCHG: usb_icl: 0 voting for 0 - on
  1423. [    8.052087] c1    346 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
  1424. [    8.052088] c1    346 SMBCHG: usb_suspend: 2 voting for 0 - on
  1425. [    8.052107] c1    346 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
  1426. [    8.052119] c1    346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1427. [    8.052158] c0    386 SMBCHG: power_ok_handler: triggered: 0x00.
  1428. [    8.052412] c1    346 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1429. [    8.052414] c1    346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1430. [    8.052416] c1    346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1431. [    8.052639] c1    346 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1432. [    8.052642] c1    346 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1433. [    8.052643] c1    346 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1434. [    8.052866] c1    273 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
  1435. [    8.052867] c1    273 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
  1436. [    8.102236] c1    277 dwc3 dwc3_msm_notify_attached_source: id_state = 1
  1437. [    8.102536] c1    277 SMBCHG: smbchg_battery_set_property: Received resistor change (0)->(1)
  1438. [    8.102573] c1    346 SMBCHG: smbchg_sink_current_change_worker: Skipped, chg_type: 4, sink_current: 1
  1439. [    8.104299] c1    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1440. [    8.104350] c1    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1441. [    8.104357] c1    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1442. [    8.104471] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1443. [    8.104495] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1444. [    8.104517] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1445. [    8.104537] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1446. [    8.104558] c1    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1447. [    8.106310] c1    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1448. [    8.106686] c1    273 usb_otg_vreg: no parameters
  1449. [    8.106716] c1    273 usb_otg_vreg: supplied by smbcharger_external_otg
  1450. [    8.107938] c1    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1451. [    8.107941] c1    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1452. [    8.107948] c1    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1453. [    8.108028] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1454. [    8.108052] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1455. [    8.108073] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1456. [    8.108092] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1457. [    8.108113] c1    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1458. [    8.109882] c1    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1459. [    8.119021] c2      1 Registered cp15_barrier emulation handler
  1460. [    8.125607] c2      1 Registered setend emulation handler
  1461. [    8.125847] c2      1 Loading compiled-in X.509 certificates
  1462. [    8.126124] c2      1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
  1463. [    8.126384] c2      1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
  1464. [    8.126604] c2      1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
  1465. [    8.126823] c2      1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
  1466. [    8.126837] c2      1 registered taskstats version 1
  1467. [    8.127841] c2      1 Key type encrypted registered
  1468. [    8.171630] c2      1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
  1469. [    8.171712] c2      1 adsprpc: channel link type: 0
  1470. [    8.179332] c2    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1471. [    8.179335] c2    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1472. [    8.179340] c2    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1473. [    8.179377] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1474. [    8.179393] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1475. [    8.179409] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1476. [    8.179425] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1477. [    8.179441] c2    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1478. [    8.180857] c2    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1479. [    8.182474] c2    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1480. [    8.182477] c2    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1481. [    8.182482] c2    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1482. [    8.182518] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1483. [    8.182534] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1484. [    8.182550] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1485. [    8.182565] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1486. [    8.182580] c2    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1487. [    8.184018] c2    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1488. [    8.185197] c2      1 RNDIS_IPA module is loaded.
  1489. [    8.185197] c2      1 file system registered
  1490. [    8.185227] c2      1 mbim_init: initialize 1 instances
  1491. [    8.185311] c2      1 mbim_init: Initialized 1 ports
  1492. [    8.186208] c2      1 rndis_qc_init: initialize rndis QC instance
  1493. [    8.186328] c2      1 Number of LUNs=8
  1494. [    8.186334] c2      1 Mass Storage Function, version: 2009/09/11
  1495. [    8.186336] c2      1 LUN: removable file: (no medium)
  1496. [    8.186345] c2      1 Number of LUNs=1
  1497. [    8.186367] c2      1 LUN: removable file: (no medium)
  1498. [    8.186368] c2      1 Number of LUNs=1
  1499. [    8.186501] c2      1 android_usb gadget: android_usb ready
  1500. [    8.187444] c2    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1501. [    8.187446] c2    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1502. [    8.187451] c2    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1503. [    8.187487] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1504. [    8.187503] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1505. [    8.187519] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1506. [    8.187534] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1507. [    8.187550] c2    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1508. [    8.189011] c2    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1509. [    8.190811] c2      1 [KEY] keycode = 115, gpio = 126, irq = 481
  1510. [    8.190834] c2      1 [KEY] keycode = 116, gpio = 40, irq = 395
  1511. [    8.190922] c2      1 [KEY] keycode = 114, gpio = 121, irq = 476
  1512. [    8.190922] c2      1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
  1513. [    8.191855] c2    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1514. [    8.191857] c2    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1515. [    8.191863] c2    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1516. [    8.191898] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1517. [    8.191914] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1518. [    8.191930] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1519. [    8.191946] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1520. [    8.191962] c2    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1521. [    8.193596] c2    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1522. [    8.202028] c2      1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 05:57:55 UTC (21475)
  1523. [    8.203637] c2    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1524. [    8.203639] c2    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1525. [    8.203645] c2    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1526. [    8.203683] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1527. [    8.203699] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1528. [    8.203715] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1529. [    8.203731] c2    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1530. [    8.203747] c2    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1531. [    8.205190] c2    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1532. [    8.208006] c0    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1533. [    8.208009] c0    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1534. [    8.208017] c0    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1535. [    8.208116] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1536. [    8.208141] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1537. [    8.208165] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1538. [    8.208186] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1539. [    8.208207] c0    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1540. [    8.210079] c2      1 parse_cpu_levels: idx 1 545
  1541. [    8.210080] c2      1 parse_cpu_levels: idx 2 6022
  1542. [    8.210081] c2      1 parse_cpu_levels: idx 2 11499
  1543. [    8.210115] c2      1 parse_cpu_levels: idx 1 545
  1544. [    8.210115] c2      1 parse_cpu_levels: idx 2 6022
  1545. [    8.210116] c2      1 parse_cpu_levels: idx 2 11499
  1546. [    8.210170] c0    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1547. [    8.216443] c0    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1548. [    8.216446] c0    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1549. [    8.216455] c0    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1550. [    8.216552] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1551. [    8.216578] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1552. [    8.216600] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1553. [    8.216622] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1554. [    8.216644] c0    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1555. [    8.218355] c2      1 [FLT] qpnp_flash_led_probe: ++
  1556. [    8.218486] c2      1 [FLT] flash_strobe = 22
  1557. [    8.218503] c2      1 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
  1558. [    8.218667] c0    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1559. [    8.219226] c2      1 [FLT] qpnp_flash_led_probe: --
  1560. [    8.220119] c0    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1561. [    8.220122] c0    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1562. [    8.220129] c0    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1563. [    8.220222] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1564. [    8.220247] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1565. [    8.220270] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1566. [    8.220292] c0    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1567. [    8.220313] c0    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1568. [    8.220488] c2      1 rmnet_ipa started initialization
  1569. [    8.220493] c2      1 IPA SSR support = True
  1570. [    8.220494] c2      1 IPA ipa-loaduC = True
  1571. [    8.220495] c2      1 IPA SG support = True
  1572. [    8.222279] c2      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
  1573. [    8.222281] c2      1 ipa ipa2_uc_state_check:301 uC is not loaded
  1574. [    8.222342] c0    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1575. [    8.223037] c2      1 rmnet_ipa completed initialization
  1576. [    8.224318] c1    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1577. [    8.224321] c1    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1578. [    8.224328] c1    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1579. [    8.224407] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1580. [    8.224432] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1581. [    8.224454] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1582. [    8.224473] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1583. [    8.224493] c1    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1584. [    8.226029] c2      1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
  1585. [    8.226260] c1    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1586. [    8.226870] c2      1 apc0_pwrcl_mem_acc_corner: disabling
  1587. [    8.226872] c2      1 apc1_perfcl_mem_acc_corner: disabling
  1588. [    8.226874] c2      1 apcc_l3_mem_acc_corner: disabling
  1589. [    8.226875] c2      1 gfx_mem_acc_corner: disabling
  1590. [    8.226877] c2      1 kryo0-retention: disabling
  1591. [    8.226880] c2      1 kryo1-retention: disabling
  1592. [    8.226930] c2      1 gdsc_mmagic_bimc: disabling
  1593. [    8.226931] c2      1 rome_vreg: disabling
  1594. [    8.226981] c2      1 usb_otg_vreg: disabling
  1595. [    8.226985] c2      1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
  1596. [    8.227366] c2      1 clock_late_init: Removing enables held for handed-off clocks
  1597. [    8.227777] c1    273 [AUD] snd_soc_msm8996: uart_gpios_init done
  1598. [    8.227779] c1    273 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
  1599. [    8.227785] c1    273 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
  1600. [    8.227911] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
  1601. [    8.227937] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
  1602. [    8.227958] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
  1603. [    8.227979] c1    273 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
  1604. [    8.228000] c1    273 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
  1605. [    8.229824] c1    273 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
  1606. [    8.230969] c2      1 ALSA device list:
  1607. [    8.230971] c2      1   No soundcards found.
  1608. [    8.346974] c1    273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
  1609. [    8.552234] c1    365 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  1610. [    8.552261] c1    365 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
  1611. [    8.552263] c1    365 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
  1612. [    8.709333] c1    268 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
  1613. [    8.709337] c1    268 of_batterydata_get_best_profile: Find  qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
  1614. [    8.709346] c1    268 FG: fg_batt_profile_init: batt_full_chcriteria_ma = 345
  1615. [    8.709348] c1    268 FG: fg_batt_profile_init: batt_fcc_ma = 3400
  1616. [    8.709349] c1    268 FG: fg_batt_profile_init: batt_capacity_mah = 3450
  1617. [    8.709351] c1    268 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
  1618. [    8.713134] c1    268 SMBCHG: battchg_suspend: 0 voting for 0 - on
  1619. [    8.820846] c0      4 SMBCHG: battchg_suspend: 1 voting for 0 - on
  1620. [    8.820854] c0      4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1621. [    8.820857] c0      4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1622. [    8.820860] c0      4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1623. [    8.820944] c0      4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1624. [    8.995556] c1    273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
  1625. [    9.055570] c1    365 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  1626. [    9.055596] c1    365 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
  1627. [    9.246812] c0    273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
  1628. [    9.905548] c0    273 dwc3 dwc3_msm_notify_attached_source: id_state = 1
  1629. [   10.715773] c1    424 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
  1630. [   10.715777] c1    424 of_batterydata_get_best_profile: Find  qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
  1631. [   10.715786] c1    424 FG: fg_batt_profile_init: batt_full_chcriteria_ma = 345
  1632. [   10.715788] c1    424 FG: fg_batt_profile_init: batt_fcc_ma = 3400
  1633. [   10.715789] c1    424 FG: fg_batt_profile_init: batt_capacity_mah = 3450
  1634. [   10.715791] c1    424 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
  1635. [   10.719664] c1    424 SMBCHG: battchg_suspend: 0 voting for 0 - off
  1636. [   10.725269] c1    424 FG: fg_batt_profile_init: Battery SOC: 100, V: 4318059uV
  1637. [   10.725272] c1    424 [BATT] Probe process: (1, 3)
  1638. [   10.725284] c1    424 [BATT] htc_battery_probe_process: catch name 2, set batt id=2, full_ma=345, fcc_ma=3400, capacity=3450, half_capacity_ma:1600, pd_is_limited:0, batt_eoc_current_ma:100
  1639. [   10.725284] c1    424 [BATT] Probe process done.
  1640. [   10.725   10.725472] c1     18 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1641. [   10.725476] c1     18 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1642. [   10.725478] c1     18 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1643. [   10.725611] c1    425 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1644. [   10.728294] c0    275 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
  1645. [   10.728296] c0    275 [BATT] read_batt_cycle_info: Checksum 298] c0    275 [BATT] read_batt_cycle_info: g_batt_first_use_time = 21478, g_overheat_55_sec = 0, g_total_level_raw = 0
  1646. [   10.728303] c0    275 [BATT] calculate_batt_cycle_info: g_ba_sec = 0, g_total_level_raw = 0
  1647. [   10.728305] c0    275 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
  1648. [   10.728324] c0    275 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:21478, store_time=0, batt_temp=287, store_temp=0, consistent_flag=0 at 10719468983 (1970-01-01 05:57:58.035132544 UTC)
  1649. [   10.728326] c0    275 [BATT] pre_level=100,pre_raw_level=100 to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
  1650. [   10.728336] c0    275 [BATT] write battery data: level:100, 78 at 10719480650 (1970-01-01 05:57:58.035146502 UTC)
  1651. [   10.728337] c0    275 ignore the fist time on boot.
  1652. [   10.728675] c0    422 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
  1653. [   10.728680] c0    422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  1654. [   10.728682] c0    422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1655. [   10.728685] c0    422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1656. [   10.728734] c0    422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1657. [   10.744971] c0    275 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
  1658. [   10.745120] c0    275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,97,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
  1659. [   10.746839] c0    275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,1:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
  1660. [   10.748200] c0    275 [BATT] ID=2,level=100,level_raw=100,voeason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=271,usb_overheat=0,level_accu=0 at 10739344870 (1970-01-01 05:57:58.054990983 UTC)
  1661. [   10.748204] c0    275 [BATT] Device is at booting stage at 1 10766776800 (1970-01-01 05:57:58.082442653 UTC)
  1662. [   10.775661] c1    424 [BATT] chg_full_check_worker: vol:4318, curr=53, is_full_count=0, is_full=0 at 10766806227 (1970-01-01 05:57:58.082470569 UTC)
  1663. [   10.778098] c0    275 [BATT] set_batt_psy_property. value(0)0 (1970-01-01 05:57:58.084907445 UTC)
  1664. [   10.778192] c0    275 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-01-01 05:57:58, g_overheat_55_sec = 0, g_total_level_raw = 0
  1665. [   10.778193] c0    275 [BATT] calculate_batt_cycle_info: savery 50%
  1666. [   10.778204] c0    275 [BATT] set charging_current(500000) at 10769349040 (1970-01-01 05:57:58.085015153 UTC)
  1667. [   10.778218] c0    275 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 10769362894 (1970-01-01 05:57:58.085027340 UTC)
  1668. [   10.778222] c0    275 [BATT] set ibat max(1600000),ibat_tota778226] c0    275 [BATT] set_batt_psy_property. value(1600000) prop(32) at 10769371332 (1970-01-01 05:57:58.085037601 UTC)
  1669. [   10.778228] c0    275 SMBCHG: smbchg_set_fastchg_current_useCHG: fcc: 1 voting for 1600 - on
  1670. [   10.778298] c0    275 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1600, set to 1600
  1671. [   10.778300] c0    275 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
  1672. [   10.778306] c0    275 [BATT] set charging_enable(1) at 10769451228 (1970-01-01 05:57:58.085117653 UTC)
  1673. [   10.778309] c0    275 [BATT] set_batt_psy_property. value(1) prop(68) at 10769454665 (1970-01-01 05:57:58.085120986 UTC)
  1674. [   10.778313] c0    275 [BATT] set pwrsrc_enable(1) at 10769458207 (1970-01-01 05:57:58.085124736 UTC)
  1675. [   10.778316] c0    275 [BATT] set_batt_psy_property. value(1) prop(69) at 10769461332 (1970-01-01 05:57:58.085127809 UTC)
  1676. [   10.778598] c0    422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  1677. [   10.778599] c0    422 SMBCHG: usb_icl: 0 voting for 500 - on
  1678. [   10.778602] c0    422 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
  1679. [   10.778604] c0    422 SMBCHG: usb_suspend: 2 voting for 0 - off
  1680. [   10.778739] c0    386 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(21470042) diff(21470042) count_same_dischg(0) limit_iusb(0)
  1681. [   10.778769] c0    422 SMBCHG: smbchg_set_usb_current_max: us 10.778784] c0    422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1682. [   10.780919] c0    275 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1340=10,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
  1683. [   10.781069] c0    275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8CHG_CFG[FA:FF]=[1c,47,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
  1684. [   10.782380] c0    275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2SB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
  1685. [   10.783704] c0    275 [BATT] ID=2,level=100,level_raw=100,vousb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=271,usb_overheat=0,level_accu=0 at 10774849093 (1970-01-01 05:57:58.090496455 UTC)
  1686. [   10.783708] c0    275 [BATT] Device is at booting stage at 1me = 1970-01-01 05:57:58, g_overheat_55_sec = 0, g_total_level_raw = 0
  1687. [   10.831793] c0    275 [BATT] calculate_batt_cycle_info: savecycle data every 50%
  1688. [   10.831802] c0    275 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
  1689. [   10.831857] c0    275 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 10823001389 (1970-01-01 05:57:58.138664846 UTC)
  1690. [   10.831861] c0    275 [BATT] ibat_total=1600000[1600000,0],iT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
  1691. [   10.834578] c0    275 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
  1692. [   10.835873] c0    275 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
  1693. [   10.837193] c0    275 [BATT] ID=2,level=100,level_raw=100,voeason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 10828338056 (1970-01-01 05:57:58.143985992 UTC)
  1694. [   10.837197] c0    275 [BATT] Device is at booting stage at 1_handler: p2f triggered
  1695. [   10.883569] c0    371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1696. [   11.278895] c0    422 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  1697. [   11.278921] c0    422 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
  1698. [   11.278924] c0    422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
  1699. [   11.747797] c0      0 FG: fg_vbatt_low_handler: vbatt-low triggered
  1700. [   11.747854] c0    427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  1701. [   11.747857] c0    427 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1702. [   11.747859] c0    427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1703. [   11.748045] c0      4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1704. [   11.782225] c0    422 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  1705. [   11.782250] c0    422 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, ⸮[   12.119035] c3     26 sched: RT throttling activated for rt_rq 0000000000000000 (cpu 3)
  1706. [   12.119035] c3     26 potential CPU hogs:
  1707. [   12.119035] c3336] c2      1 Freeing unused kernel memory: 496K
  1708. [   12.139352] c2      1 Freeing alternatives memory: 108K
  1709. + exec
  1710. [   12.164198] c0      1 qpnp_led.red: b:00 on:0 off:0
  1711. [   12.168157] c0      1 qpnp_led.green: b:00 on:0 off:0
  1712. [   12.173183] c3      1 qpnp_led.blue: b:ff on:50 off:0
  1713. [   14.600723] c2    658 EXT4-fs (sda35): couldn't mount as ext3 due to feature incompatibilities
  1714. [   14.608586] c2    658 EXT4-fs (sda35): couldn't mount as ext2 due to feature incompatibilities
  1715. [   14.618903] c2    658 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: (null)
  1716. [   14.819991] c0      1 enable_store: android_usb: already disabled
  1717. [   14.829412] c0      1 dwc3 6a00000.dwc3: request 0000000000000000 was not queued to ep0out
  1718. [   14.837986] c0      1 rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
  1719. [   14.846415] c0      1 android_usb gadget: using random self ethernet address
  1720. [   14.853080] c3      1 android_usb gadget: using random host ethernet address
  1721. [   14.860350] c3      1 rndis0: MAC d2:1d:f9:e7:dc:b8
  1722. [   14.864939] c3      1 rndis0: HOST MAC b2:39:25:87:52:15
  1723. [   14.874535] c0    862 IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1724. [   14.897678] c0    866 random: init-debug urandom read with 127 bits of entropy available
  1725. [   15.156479] c0      0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
  1726. [   15.228432] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
  1727. [   15.236108] c0    422 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
  1728. [   15.244986] c0    422 android_work: android_work: did not send uevent (0 0 0000000000000000)
  1729. [   15.253417] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
  1730. [   15.261908] c0    422 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
  1731. [   15.270944] c0    422 android_work: android_work: did not send uevent (0 0 0000000000000000)
  1732. [   15.283357] c0      0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
  1733. [   15.368367] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
  1734. [   15.375884] c0    422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
  1735. [   15.385029] c0    422 android_work: android_work: sent uevent USB_STATE=CONNECTED
  1736. [   15.392438] c0    422 android_work: [USB] android_work: set usb_connect2pc = 1
  1737. [   15.401470] c0      0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
  1738. [   15.408185] c0      0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
  1739. [   15.414755] c0    422 IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  1740. [   15.422150] c0    422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  1741. [   15.431362] c0    422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1742. [   15.438316] c0    422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1743. [   15.446154] android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
  1744. [   15.454663] c0    422 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
  1745. [   15.463854] c0      4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1746. [   15.469989] c0      4 random: nonblocking pool is initialized
  1747. [   15.515557] c0    422 android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1748. [   15.953861] c0    880 EXT4-fs (sda35): re-mounted. Opts: (null)
  1749. [   15.969300] c3      1 preinit: (15.96) Welcome to Sailfish OS 3.0.2.8 (Oulanka)
  1750. [   15.993138] c0      1 preinit: (15.98) is_erase_needed: No : 0
  1751. [   16.025903] c1      1 preinit: (16.01) get_bootstate: USER : 0
  1752. [   16.031296] c1      1 preinit: (16.02) BOOTSTATE = USER
  1753. [   16.038705] c1      1 preinit: (16.02) Booting to default.target
  1754. [   16.074261] c3      1 systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  1755. [   16.092392] c3      1 systemd[1]: Detected architectur⸮
  1756. Wel[   16.107178] c2      1 systemd[1]: Set hostname to <Sailfish>.
  1757. [   17.033989] c0    900 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1758. [   17.125321] c2      1 systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  1759. [   17.140436] c2      1 systemd[1]: data.mount: Unit is bound to inactive unit dev-sda35.device. Stopping, too.
  1760. [   17.174329] c3      1 systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  1761. [   17.196136] c3      1 systemd[1]: Started Dispatch Password  Requests to Console Directory Watch.
  1762. [   17.216148] c3      1 systemd[1]: Created slice Ro⸮⸮⸮5⸮j⸮ OK  ] Created slice Root Slice.
  1763. [   17.225946] c3      1 systemd[1]: Created slice Syst⸮⸮⸮⸮&⸮ z-⸮ ] Created slice System Slice.
  1764. [   17.235908] c3      1 systemd[1]: Created slice User and Sessi⸮⸮⸮⸮&⸮ z-⸮ ] Created slice User and Session Slice.
  1765. [   17.252282] c3      1 systemd[1]: Reached targe[  OK  ] Reached target Slices.
  1766. [   17.262424] c3      1 systemd[1]: Listening on Journa[  OK  ] Listening on Journal Socket.
  1767. [   17.273628] c3      1 systemd[1]: Starting Create list of required static device nodes for the current ⸮         Starting Create list of required st... nodes for the current kernel...
  1768. [   17.293384] c3      1 systemd[1]: Mounting Droid mount for /ing Droid mount for /dev/stune...
  1769. [   17.310032] c3      1 systemd[1]: Mounting FFS mount...
  1770. [   17.314111] c0    908 ffs_data_put()⸮         Mounting FFS mount...
  1771. [   17.326719] c3      1 systemd[1]: Mounting Droid mount for /dev/⸮         Mounting Droid mount for /dev/cpuctl...
  1772. [   17.343487] c3      1 systemd[1]: Starting Remount Root and Kernel File S⸮         Starting Remount Root and Kernel File Systems...
  1773. [   17.360272] c3      1 systemd[1]: Starting Setup Virtual Co         Starting Setup Virtual Console...
  1774. [   17.375729] c3      1 systemd[1]: Listening on Journal Socket (/dev/log).
  1775. [   17.377355] c2    913 EXT4-fs (sda35): re-mounted. Opts:⸮[  OK  ] Listening on Journal Socket (/dev/log).
  1776. [   17.399157] c3      1 systemd[1]: Listening on udev Kernel⸮[  OK  ] Listening on udev Kernel Socket.
  1777. [   17.415802] c3      1 systemd[1]: Listening on /dev/initctl Compatibility Na⸮[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  1778. [   17.439385] c3      1 systemd[1]: Starting Journal S⸮         Starting Journal Service...
  1779. [   17.453484] c3      1 systemd[1]: Mounting Debug File ⸮         Mounting Debug File System...
  1780. [   17.465800] c2      1 systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
  1781. [   17.475573] c2      1 systemd[1]: Mounting Temporary Dire⸮         Mounting Temporary Directory...
  1782. [   17.489096] c2      1 systemd[1]: Listening on udev Contro⸮[  OK  ] Listening on udev Control Socket.
  1783. [   17.505800] c2      1 systemd[1]: Started Forward Password Requests to Wall Directo⸮[  OK  ] Started Forward Password Requests to Wall Directory Watch.
  1784. [   17.526069] c2      1 systemd[1]: Created slice system-serial\x2dgett[  OK  ] Created slice system-serial\x2dgetty.slice.
  1785. [   17.543031] c1      1 systemd[1]: Mounting Droid mount for /dev/cpuset...
  1786. [   17.546127] c0    931 cgroup: new mount options do not match the existing superblock, will be⸮         Mounting Droid mount for /dev/cpuset...
  1787. [   17.565684] c1      1 systemd[1]: Reached tar⸮[  OK  ] Reached target Swap.
  1788. [   17.580121] c1      1 systemd[1]: Mounted Debug File⸮[  OK  ] Mounted Debug File System.
  1789. [   17.595766] c1      1 systemd[1]: Mounted Temporary Di⸮⸮⸮⸮&⸮ z-⸮ ] Mounted Temporary Directory.
  1790. [   17.605779] c1      1 systemd[1]: Mounted Droid mount for /de⸮[  OK  ] Mounted Droid mount for /dev/cpuset.
  1791. [   17.622357] c1      1 systemd[1]: Mounted Droid mount for /d⸮[  OK  ] Mounted Droid mount for /dev/stune.
  1792. [   17.639458] c1      1 systemd[1]: Started Journal [  OK  ] Started Journal Service.
  1793. [  OK  ] Started Create list of required sta...ce nodes for the current kernel.
  1794. [FAILED] Failed to mount FFS mount.
  1795. See 'systemctl status dev-mtp.mount' for details.
  1796. [FAILED] Failed to mount Droid mount for /dev/cpuctl.
  1797. See 'systemctl status dev-cpuctl.mount' for details.
  1798. [  OK  ] Started Remount Root and Kernel File Systems.
  1799. [  OK  ] Started Setup Virtual Console.
  1800.          Starting Clean RPM db region files at each reboot...
  1801.          Starting Load/Save Random Seed...
  1802.          Starting udev Coldplug all Devices...
  1803.          Starting Create Static Device Nodes in /dev...
  1804.          Starting Flush Journal to Persistent Storage...
  1805. [  OK  ] Started Clean RPM db region files at each reboot.
  1806. [  OK  ] Started Load/Save Random Seed.
  1807. [  OK  ] Started Create Static Device Nodes in /dev.
  1808. [   17.963010] c2    924 systemd-journald[924]: Received request to flush runtime journal from PID 1
  1809. [  OK  ] Started Flush Journal to Persistent Storage.
  1810.          Starting udev Kernel Device Manager...
  1811. [  OK  ] Reached target Local File Systems (Pre).
  1812.          Mounting Droid mount for /mnt...
  1813. [  OK  ] Mounted Droid mount for /mnt.
  1814. [  OK  ] Started udev Kernel Device Manager.
  1815.          Mounting FUSE Control File System...
  1816.          Mounting Configuration File System...
  1817.          Starting Apply Kernel Variables...
  1818. [  OK  ] Mounted FUSE Control File System.
  1819. [  OK  ] Mounted Configuration File System.
  1820. [  OK  ] Started Apply Kernel Variables.
  1821. [  OK  ] Started udev Coldplug all Devices.
  1822.          Starting udev Wait for Complete Device Initialization...
  1823. [   18.863176] c1    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1824. [   18.870134] c3    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1825. [   18.876443] c0    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1826. [   18.877446] c3    987 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1827. [   18.894559] c2    966 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1828. [   18.897167] c0    949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1829. [   18.902671] c3    958 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1830. [   18.909242] c3    969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1831. [   18.911601] c3    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1832. [   18.913993] c3    962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1833. [   18.916147] c3    951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1834. [   18.930577] c1    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1835. [   18.930579] c0    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1836. [   18.931105] c0    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1837. [   18.939765] c3    955 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1838. [   18.941944] c0    949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1839. [   18.942944] c1    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1840. [   18.944100] c3    969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1841. [   18.949967] c3    958 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1842. [   18.954209] c3    950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1843. [   18.955777] c3    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1844. [   18.956496] c3    987 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1845. [   18.958910] c3    957 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1846. [   18.959132] c0    962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1847. [   18.967362] c3    951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1848. [   18.976009] c1    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1849. [   18.976875] c0    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1850. [   18.989352] c0    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1851. [   18.996837] c3    969 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1852. [   19.000067] c3    949 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1853. [   19.002040] c0    950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1854. [   19.003526] c3    951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1855. [   19.015335] c0    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1856. [   19.015427] c1    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1857. [   19.025824] c0    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1858. [   19.026470] c3    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1859. [   19.031019] c0    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1860. [   19.031921] c3    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1861. [   19.040615] c3    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1862. [   19.050667] c3    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1863. [   19.051659] c3    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1864. [   19.051796] c3    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1865. [   19.064093] c0    964 FG: fg_vbatt_low_handler: vbatt-low triggered
  1866. [   19.064164] c0      4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  1867. [   19.064167] c0      4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1868. [   19.064170] c0      4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1869. [   19.079061] c3    962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1870. [   19.079403] c0    422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1871. [   19.081799] c3    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1872. [   19.082384] c0    950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1873. [   19.086508] c0    951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1874. [   19.094754] c0    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1875. [   19.099269] c0    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1876. [   19.102454] c0    957 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1877. [   19.109661] c0    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1878. [   19.110184] c3    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1879. [   19.125636] c3    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1880. [   19.129443] c3    956 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1881. [   19.140247] c3    956 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1882. [   19.146671] c0    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1883. [   19.152768] c3    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1884. [   19.154252] c1    951 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1885. [   19.155416] c0    950 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1886. [   19.160840] c0    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1887. [   19.164543] c3    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1888. [   19.175302] c3    962 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1889. [   19.179882] c0    964 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1890. [   19.235154] c1    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1891. [   19.264658] c1    948 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1892. [   19.269783] c1    988 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1893. [   19.274537] c3    965 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1894. [   19.279024] c3    955 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
  1895. [   19.279998] c0    952 ufshcd 624000.ufshc: ufshcd_ioctl: User buffer ⸮[  OK  ] Created slice system-mount\x2dsd.slice.
  1896.          Mounting Droid mount for /dev/cpuctl...
  1897.          Starting Clean RPM db region files at each reboot...
  1898.          Mounting FFS mount...
  1899. [FAILED[   19.427753] c3   2001 ffs_data_put(): freeing
  1900. ] Failed to mount Droid mount for /dev/cpuctl.
  1901. See 'systemctl status dev-cpuctl.mount' for details.
  1902. [  OK  ] Started Clean RPM db region files at each reboot.
  1903. [FAILED] Failed to mount FFS mount.
  1904. See 'systemctl status dev-mtp.mount' for details.
  1905. [  OK  ] Found device KLUBG4G1CE-B0B1 vendor.
  1906. [  OK  ] Found device KLUBG4G1CE-B0B1 /.
  1907. [  OK  ] Found device /dev/ttyHSL0.
  1908.          Mounting /system_raw...
  1909.          Mounting /vendor...
  1910. [   19.666302] c1   2210 EXT4-fs (sda33): mounted filesystem with ordered data mode. Opts: (null)
  1911. [  OK  ] Mounted /system_raw.
  1912. [   19.697880] c2   2222 EXT4-fs (sda31): warning: mounting unchecked fs, running e2fsck is recommended
  1913. [   19.712745] c2   2222 EXT4-fs (sda31): mounted filesystem without journal. Opts: (null)
  1914. [  OK  ] Mounted /vendor.
  1915. [  OK  ] Reached target Local File Systems.
  1916.          Starting Create Volatile Files and Directories...
  1917. [  OK  ] Listening on Nemo device lock socket.
  1918. [  OK  ] Listening on D-Bus System Message Bus Socket.
  1919.          Starting D-Bus System Message Bus...
  1920.          Starting StateFS FUSE filesystem, system-wide...
  1921.          Starting Mode Control Entity (MCE)...
  1922. [  OK  ] Started Create Volatile Files and Directories.
  1923. [   19.848895] [BATT] set charging_current(500000), PC connected at 19848742809 (1970-01-01 05:58:07.155705796 UTC)
  1924. [   19.862674] c0      4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  1925. [  OK  ] Started D-Bus System Message Bus.
  1926. [   19.885594] c0      4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  1927. [   19.911302] c0      4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  1928. [   19.920906] c0      4 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  1929. [  OK  ] Started StateFS FUSE filesystem, system-wide.
  1930. [   20.044644] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1931. [   20.048670] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1932. [   20.048727] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1933. [   20.049859] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1934. [   20.049918] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1935. [   20.049975] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1936. [   20.050053] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1937. [   20.050111] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1938. [   20.050168] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1939. [   20.062039] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1940. [   20.062107] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1941. [   20.062165] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1942. [   20.062270] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1943. [   20.062328] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1944. [   20.062386] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1945. [   20.062461] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1946. [   20.062518] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1947. [   20.062575] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1948. [   20.092607] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1949. [   20.092670] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1950. [   20.092728] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1951. [   20.092804] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1952. [   20.092861] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1953. [   20.092918] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1954. [   20.092992] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1955. [   20.093050] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1956. [   20.093107] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1957. [   20.102864] c2   2372 qpnp_led.red: b:ff on:500 off:2500
  1958. [   20.103092] c2   2372 qpnp_led.green: b:ff on:500 off:2500
  1959. [   20.103313] c2   2372 qpnp_led.blue: b:ff on:500 off:2500
  1960. [   20.106649] c2   2372 qpnp_led.red: b:ff on:500 off:2500
  1961. [   20.107888] c2   2372 qpnp_led.green: b:ff on:500 off:2500
  1962. [   20.109142] c2   2372 qpnp_led.blue: b:ff on:500 off:2500
  1963. [   20.113484] c2   2372 qpnp_led.red: b:ff on:500 off:2500
  1964. [   20.114720] c2   2372 qpnp_led.green: b:ff on:500 off:2500
  1965. [   20.115961] c2   2372 qpnp_led.blue: b:ff on:500 off:2500
  1966. [   20.133718] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1967. [   20.134795] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1968. [   20.135940] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1969. [   20.137031] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1970. [   20.137090] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1971. [   20.137148] c2   2372 qpnp_led.blue: b:00 on:50 off:0
  1972. [   20.137225] c2   2372 qpnp_led.red: b:00 on:50 off:0
  1973. [   20.137284] c2   2372 qpnp_led.green: b:00 on:50 off:0
  1974. [   20.137343] c2   2372 qpnp_led.blue: b:00 on:50⸮[  OK  ] Started Mode Control Entity (MCE).
  1975.          Starting Get initial bootstate...
  1976.          Starting Update UTMP about System Boot/Shutdown...
  1977. [  OK  ] Started Get initial bootstate.
  1978. [   20.417017] c1   2372 qpnp_led.red: b:bf on:50 off:0
  1979. [   20.421261] c1   2372 qpnp_led.green: b:bf on:50 off:0
  1980. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  1981. [   20.432028] c1   2372 qpnp_led.blue: b:bf on:50 off:0
  1982. [   20.444616] c1   2372 qpnp_led.red: b:bf on:50 off:0
  1983. [   20.462007] c1   2372 qpnp_led.green: b:bf on:50 of⸮         Starting DSME...
  1984. [   20.469504] c1   2372 qpnp_led.blue: b:bf on:50 off:0
  1985. [   20.478285] c1   2372 qpnp_led.red: b:bf on:50 off:0
  1986. [   20.491040] c1   2372 qpnp_led.green: b:bf on:50 off:0
  1987. [   20.496482] c1   2372 qpnp_led.blue: b:bf on:50 off:0
  1988. [  OK  ] Started DSME.
  1989. [  OK  ] Started udev Wait for Complete Device Initialization.
  1990.          Starting droid-hal-init...
  1991.          Starting usb-moded USB gadget controller...
  1992. [  OK  ] Reached target System Initialization.
  1993. [  OK  ] Started Wayland path watcher.
  1994. [   20.680473] c1   3015 droid-hal-init: init first stage started!
  1995. [   20.683300] c0   3018 dwc3 6a00000.dwc3: request 0000000000000000 was not queued to ep0out
  1996. [   20.693788] c1   3015 droid-hal-init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  1997. [   20.703401] c2   3015 droid-hal-init: init second stage started!
  1998. [   20.708541] c0   3018 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
  1999. [  OK  ] Reached target Paths.
  2000. [   20.723056] c2   3015 droid-hal-init: Using Android DT directory /proc/device-tree/firmware/android/
  2001. [   20.734770] c2   3015 droid-hal-init: Running restorecon...
  2002. [   20.735577] c0   3018 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
  2003. [   20.748707] c3   3015 droid-hal-init: waitid failed: No child processes
  2004. [   20.757101] c3   3015 droid-hal-init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
  2005. [   20.772182] c1   3015 droid-hal-init: property_set("ro.dalvige", "0") failed: property already set
  2006. [   20.781807] c2   3015 droid-hal-init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  2007. [   20.791651] c3   3015 droid-hal-init: Parsing file /init.rc...
  2008. [   20.799499] c2   3015 droid-hal-init: property 'ro.product.cpu.abi' doesn't exist while expanding '/init.extraenv.${ro.product.cpu.abi}.rc'
  2009. [   20.811027] c2   3015 droid-hal-init: /init.rc: 11: error whimport
  2010. [   20.818422] c2   3015 droid-hal-init: Added '/init.environ.rc' to im[   20.825557] c2   3015 droid-hal-init: Added '/init.marlin.rc' to import list
  2011. [  OK  ] Listening on OpenSSH Server Socket.
  2012. [   20.8-hal-init: Added '/vendor/etc/init/hw/init.marlin.rc' to import list
  2013. [   20.845106] c2   3015 droid-hal-init: Added '/init.zygote64_32.rc' to import list
  2014. [   20.845613] c0   3021 rndis_function_bind_config: rndis_function_bind_config MAC: D2:7C:A6:3A:9E:74
  2015. [   20.845648] c0   3021 android_usb gadget: using random self ethernet address
  2016. [   20.845650] c0   3021 android_usb gadget: using previous host ethernet address
  2017. [   20.846008] c0   3021 rndis0: MAC a6:15:b7:aa:cb:53
  2018. [   20.846010] c0   3021 rndis0: HOST MAC b2:39:25:87:52:15
  2019. [   20.859691] c0   3029 IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  2020. [   20.893544] c3   3015 droid-hal-init: Parsing file /init.environ.rc...
  2021. [   20.899650] c2   3015 droid-hal-init: Parsing file /init.marlin.rc...
  2022. [   20.905753] c2   3015 droid-hal-init: Unable to open '/init.marlin.rc': No such file or directory
  2023. [   20.914592] c2   3015 droid-hal-init: /init.rc: 15: Could not import file '/init.marlin.rc': No such file or directo⸮[  OK  ] Reached target Sockets.
  2024. [   20.926928] c3   3015 droid-hal-init: Parsing file /vendor/e 20.936862] c3   3015 droid-hal-init: Unable to open '/vendor/etc/init/hw/init.marlin.rc': No such file or directory
  2025. [   20.947324] c3   3015 droid-hal-init: /init.rc: 16: Could no No such file or directory
  2026. [   20.952462] c0      0 dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
  2027. [   20.966953] c3   3015 droid-hal-init: Parsing file /init.zygote64_32.rc...
  2028. [   20.973811] c3   3015 droid-hal-init: Unable to open '/init.zygote64_32.rc': No such file or directory
  2029. [   20.983084] c3   3015 droid-hal-init: /init.rc: 17: Could not import file '/init.zygote64_32.rc': No such file or directory
  2030. [   20.996082] c3   3015 droid-hal-init: Parsing directory /usr/libexec/droid-hybris/system/et⸮[  OK  [   21.004574] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/android.hardware.keymaster@3.0-service-qti.rc...
  2031. ] Started Daily Cleanup of Temporary Directories.
  2032. [   21.01908  21.034637] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/cameraserver.rc...
  2033. [   21.045511] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/hwservicemanager.rc...
  2034. [   21.056631] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/keystore.rc...
  2035. [   21.065716] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/mediaserver.rc...
  2036. [   21.075708] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/netd.rc...
  2037. [   21.078383] c0      0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
  2038. [   21.078454] c0      4 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  2039. [   21.078457] c0      4 SMBCHG: usb_icl: 0 voting for 0 - on
  2040. [   21.078459] c0      4 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
  2041. [   21.078461] c0      4 SMBCHG: usb_suspend: 2 voting for 0 - on
  2042. [   21.078487] c0      4 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
  2043. [   21.078558] c0    386 SMBCHG: power_ok_handler: triggered: 0x00.
  2044. [   21.078566] c0      4 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
  2045. [   21.078569] c0      4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2046. [   21.078630] c0      4 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 1
  2047. [   21.078631] c0      4 android_work: [USB] android_work: sw_connected 1, connected 0 last_uevent 2
  2048. [   21.078657] c0      4 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  2049. [   21.078658] c0      4 android_work: [USB] android_work: set usb_connect2pc = 0
  2050. [   21.078659] c0      4 android_work: android_work: OS_NOT_YET
  2051. [   21.078775] c0    422 [BATT] cancel chg_full_check_work when plug out.
  2052. [   21.078924] c0    427 [BATT] charger_exist_lock Unlock at 21070069076 (2019-03-13 08:17:33.564607087 UTC)
  2053. [   21.081322] c2    277 [BATT] set_batt_psy_property. value(0) prop(89) at 21072468035 (2019-03-13 08:17:33.567005473 UTC)
  2054. [   21.081325] c2    277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time modify!
  2055. [   21.081329] c2    277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
  2056. [   21.081330] c2    277 [BATT] calculate_batt_cycle_info: savery 50%
  2057. [   21.081331] c2    277 [BATT] batt_level_adjust: Cable plug out when level 100, reset timer.
  2058. [   21.081605] c2   1994 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 0, rc = 0
  2059. [   21.081607] c2   1994 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2060. [   21.082463] c0    371 SMBCHG: fastchg_handler: p2f triggered
  2061. [   21.082469] c0    371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2062. [   21.083928] c2    277 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=12,0x1608=10,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
  2063. [   21.084112] c2    277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,87,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
  2064. [   21.085876] c2    277 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
  2065. [   21.087297] c1    277 [BATT] ID=2,level=100,level_raw=100,voeason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 21078440952 (2019-03-13 08:17:33.572956150 UTC)
  2066. [   21.087303] c1    277 [BATT] Device is at booting stage at 2pt: usb conn speed = 3
  2067. [   21.201714] c0    422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
  2068. [   21.201714] c0    422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
  2069. [   21.201783] c0    422 android_work: android_work: sent uevent USB_STATE=CONNECTED
  2070. [   21.201785] c0    422 android_work: [USB] android_work: set usb_connect2pc = 1
  2071. [   21.205379] c0    422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 1
  2072. [   21.205379] c0    422 android_work: [USB] android_work: sw_connected 1, connected 0 last_uevent 1
  2073. [   21.205432] c0    422 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  2074. [   21.205433] c0    422 android_work: [USB] android_work: set usb_connect2pc = 0
  2075. [   21.205434] c0    422 android_work: android_work: OS_NOT_YET
  2076. [   21.256554] c0      0 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
  2077. [   21.341690] c0    422 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
  2078. [   21.341691] c0    422 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
  2079. [   21.341861] c0    422 android_work: android_work: sent uevent USB_STATE=CONNECTED
  2080. [   21.341862] c0    422 android_work: [USB] android_work: set usb_connect2pc = 1
  2081. [   21.343933] c0      0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
  2082. [   21.344042] c0      0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
  2083. [   21.344226] c0    422 IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  2084. [   21.344541] c0    422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2085. [   21.344545] c0    422 SMBCHG: usb_icl: 0 voting for 500 - on
  2086. [   21.344549] c0    422 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
  2087. [   21.344551] c0    422 SMBCHG: usb_suspend: 2 voting for 0 - off
  2088. [   21.344656] c1    386 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(21470042) dischg_time_ms(266) diff(21469776) count_same_dischg(0) limit_iusb(0)
  2089. [   21.344820] c0    422 SMBCHG: smbchg_set_usb_current_max: us1.344835] c0    422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2090. [   21.344959] c0    422 android_work: [USB] android_work: sw_sded 0 config 1,connect2pc 1
  2091. [   21.344960] c0    422 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
  2092. [   21.346504] c0   3039 [BATT] charger_exist_lock Lock at 21337647853 (2019-03-13 08:17:33.832183520 UTC)
  2093. [   21.346545] c0    427 [BATT] chg_full_check_worker: vol:4318, curr=53, is_full_count=0, is_full=0 at 21337690613 (2019-03-13 08:17:33.832227895 UTC)
  2094. [   21.349025] c2    277 [BATT] set_batt_psy_property. value(0)7 (2019-03-13 08:17:33.834707583 UTC)
  2095. [   21.349031] c2    277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
  2096. [   21.349032] c2    277 [BATT] calculate_batt_cycle_info: savery 50%
  2097. [   21.349041] c2    277 [BATT] set charging_current(500000) at 21340187489 (2019-03-13 08:17:33.834727062 UTC)
  2098. [   21.349056] c2    277 [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 21340201447 (2019-03-13 08:17:33.834738572 UTC)
  2099. [   21.349059] c2    277 [BATT] ibat_total=1600000[1600000,0],iT] set charging_enable(1) at 21340209051 (2019-03-13 08:17:33.834748937 UTC)
  2100. [   21.349065] c2    277 [BATT] set_batt_psy_property. value(1)t 21340211968 (2019-03-13 08:17:33.834751697 UTC)
  2101. [   21.349068] c2    277 [BATT] set pwrsrc_enable(1) at 21340215353 (2019-03-13 08:17:33.834755291 UTC)
  2102. [   21.349071] c2    277 [BATT] set_batt_psy_property. value(1) prop(69) at 21340218009 (2019-03-13 08:17:33.834757791 UTC)
  2103. [   21.349340] c2   1994 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2104. [   21.349342] c2   1994 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2105. [   21.351729] c2    277 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=1,smb_curr=12mA,batfet_wa=0
  2106. [   21.351875] c2    277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,87,42,38,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,c8,41]
  2107. [   21.353607] c2    277 [BATT][SMBCHG] USB_STS[07:0B]=[10,02,2:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
  2108. [   21.354918] c2    277 [BATT] ID=2,level=100,level_raw=100,voreason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=272,usb_overheat=0,level_accu=0 at 21346064468 (2019-03-13 08:17:33.840586802 UTC)
  2109. [   21.354921] c2    277 [BATT] Device is at booting stage at 2event USB_STATE=CONFIGURED
  2110. [   21.449348] c0    371 SMBCHG: fastchg_handler: p2f triggered
  2111. [   21.449358] c0    371 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2112. [   21.578896] c0      4 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  2113. [   21.578923] c0      4 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
  2114. [   21.578926] c0      4 SMBCHG: smbchg_relax: relaxing: 0x0⸮[  OK  ] Reached target Timers.
  2115. [   21.914345] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/servicemanager.rc...
  2116. [   21.924965] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/surfaceflinger.rc...
  2117. [   21.936448] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/vndservicemanager.rc...
  2118. [   21.948258] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/vold.rc...
  2119. [   21.958699] c3   3015 droid-hal-init: Parsing file /usr/libexec/droid-hybris/system/etc/init/wificond.rc...
  2120. [   21.968997] c3   3015 droid-hal-init: Parsing directory /system/etc/init...
  2121. [   21.975369] c3   3015 droid-hal-init: Parsing file /system/etc/init/android.hidl.allocator@1.0-service.rc...
  2122. [   21.986303] c3   3015 droid-hal-init: Parsing file /system/etc/init/atrace.rc...
  2123. [   21.992406] c0      0 FG: fg_vbatt_low_handler: vbatt-low triggered
  2124. [   21.992466] c0    422 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2125. [   21.992469] c0    422 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  2126. [   21.992471] c0    422 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2127. [   21.992663] c0   3039 SMBCHG: smbchg_relax: relaxing: 0x0⸮         Starting ohm daemon for resource policy management...[   22.030077] c2   3015 droid-hal-init: Parsing file /system/etc/init/atrace_userdebug.rc...
  2128.  
  2129. [   22.042646] c2   3015 droid-hal-init: Parsing file /systemaudioserver.rc: 1: ignored duplicate definition of service 'audioserver'
  2130. [   22.061555] c2   3015 droid-hal-init: Parsing file /system/et/bootanim.rc...
  2131. [   22.069425] c2   3015 droid-hal-init: Parsing file /system/etc/init/bootstat.rc...
  2132. [   22.077193] c2   3015 droid-hal-init: Parsing file /system/etc/init/cameraserver.rc...
  2133. [   22.082229] c0      4 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
  2134. [   22.082257] c0      4 SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
  2135. [   22.098872] c2   3015 droid-hal-init: /system/etc/init/cameraserver.rc: 1: ignored duplicate definition of service 'cameraserver'
  2136. [   22.109958] c2   3015 droid-hal-init: Parsing file /system/eit/cppreopts.rc...
  2137. [   22.119191] c2   3015 droid-hal-init: Parsing file /system/etc/init/drmserver.rc...
  2138. [   22.126103] c3   3015 droid-hal-init: Parsing file /system/etc/init/dumpst⸮[  OK  ] Started usb-moded USB gadget controller.
  2139. [   22.133827] c3   3015 droid-hal-init: Parsing file /system/eatekeeperd.rc...
  2140. [   22.145893] c2   3015 droid-hal-init: Parsing file /system/etc/init/hwservicemanager.rc...
  2141. [   22.154142] c2   3015 droid-hal-init: /system/etc/init/hwservicemanager.rc: 1: ignored duplicate definition of service 'hwservicemanager'
  2142. [   22.166245] c2   3015 droid-hal-init: Parsing file /system/e-debug.rc...
  2143. [   22.175504] c2   3015 droid-hal-init: Parsing file /system/etc/init/installd.rc...
  2144. [   22.182436] c2   3015 droid-hal-init: Parsing file /system/etc/init/keystore.rc...
  2145. [   22.189829] c3   3015 droid-hal-init: /system/etc/init/keystore.rc: 1: ignored duplicate definition of service 'keystore'
  2146. [   22.200567] c3   3015 droid-hal-init: Parsing file /system/etc/init/lineage-adb.rc...
  2147. [   22.210033] c3   3015 droid-hal-init: Parsing file /system/etc/init/lineage-governor.rc...
  2148. [   22.217792] c3   3015 droid-hal-init: Parsing file /system/etc/init/lineage-iosched.rc...
  2149. [   22.225779] c3   3015 droid-hal-init: Parsing file /system/etc/init/lineage-livedisplay.rc...
  2150. [   22.234178] c2   3015 droid-hal-init: Parsing file /system/etc/init/lineage-radio.rc...
  2151. [   22.242229] c2   3015 droid-hal-init: Parsing file /system/etc/init/lineage-s[  OK  ] Started udhcpcd DHCP server.
  2152. [   22.251931] c3   3015 droid-hal-init: Parsing file /system/etc/init/lineage-system.rc...
  2153. [   22.262823] c2   3015 droid-hal-init: Parsing file /system/etc/init/lineage-tcp.rc...
  2154. [   22.269885] c2   3015 droid-hal-init: Parsing file /system/etc/init/lineage-updates.rc...
  2155. [   22.278069] c2   3015 droid-hal-init: Parsing file /system/etc/init/lmkd.rc...
  2156. [   22.285237] c2   3015 droid-hal-init: Parsing file /system/etc/init/logcatd.rc...
  2157. [   22.294966] c3   3015 droid-hal-init: Parsing file /system/etc/init/logd.rc...
  2158. [   22.301547] c3   3015 droid-hal-init: Parsing file /system/etc/init/logtagd.rc...
  2159. [   22.309095] c3   3015 droid-hal-init: Parsing file /system/etc/init/mdnsd.rc...
  2160. [   22.318224] c2   3015 droid-hal-init: Parsing file /system/etc/init/mediadrmserver.rc...
  2161. [   22.325611] c3   3015 droid-hal-init: Parsing file /system/etc/init/mediaextractor.rc...
  2162. [   22.334896] c3   3015 droid-hal-init: Parsing file /system/etc/init/mediametrics.rc...
  2163. [   22.342113] c3   3015 droid-hal-init: Parsing file /system/etc/init/mediaserver.[  OK  ] Started ohm daemon for resource policy management.
  2164. [   22.351738] c3   3015 droid-hal-init: /system/etc/init/mediauplicate definition of service 'media'
  2165. [   22.366179] c3   3015 droid-hal-init: Parsing file /system/etc/init/mtpd.rc...
  2166. [   22.373714] c2   3015 droid-hal-init: Parsing file /system/etc/init/netd.rc...
  2167. [   22.380786] c2   3015 droid-hal-init: /system/etc/init/netd.rc: 1: ignored duplicate definition of service 'netd'
  2168. [   22.390799] c2   3015 droid-hal-init: Parsing file /system/etc/init/otapreopt.rc...
  2169. [   22.399932] c2   3015 droid-hal-init: Parsing file /system/etc/init/perfprofd.rc...
  2170. [   22.406813] c3   3015 droid-hal-init: Parsing file /system/etc/init/racoon.rc...
  2171. [   22.414226] c3   3015 droid-hal-init: Parsing file /system/etc/init/recovery-persist.rc...
  2172. [   22.425008] c3   3015 droid-hal-init: Parsing file /system/etc/init/recovery-refresh.rc...
  2173. [   22.432497] c2   3015 droid-hal-init: Parsing file /system/etc/init/servicemanager.rc...
  2174. [   22.440571] c3   3015 droid-hal-init: /system/etc/init/servicemanager.rc: 1: ignored duplicate definition of service 'servicemanager'
  2175. [   22.452318] c3   3015 droid-hal-init: Parsing file /system/etoraged.rc...
  2176. [   22.461426] c3   3015 droid-hal-init: Parsing file /system/etc/init/surfaceflinger.rc...
  2177. [   22.468728] c3   3015 droid-hal-init: /system/etc/init/surfaceflinger.rc: 1: ignored duplicate definition of service 'surfaceflinger'
  2178. [   22.480494] c3   3015 droid-hal-init: Parsing file /system/ehermalservice.rc...
  2179. [   22.490166] c3   3015 droid-hal-init: Parsing file /system/etc/init/tombstoned.rc...
  2180. [   22.497147] c3   3015 droid-hal-init: Parsing file /system/etc/init/uncrypt.rc...
  2181. [   22.504615] c3   3015 droid-hal-init: Parsing file /system/etc/init/update_engine.rc...
  2182. [   22.514968] c3   3015 droid-hal-init: Parsing file /system/etc/init/update_verifier.rc...
  2183. [   22.524884] c3   3015 droid-hal-init: Parsing file /system/etc/init/vdc.rc...
  2184. [   22.531230] c3   3015 droid-hal-init: Parsing file /system/etc/init/vold.rc...
  2185. [   22.538430] c3   3015 droid-hal-init: /system/etc/init/vold.rc: 3: ignored duplicate definition of service 'vold'
  2186. [   22.548460] c3   3015 droid-hal-init: Parsing file /system/etc/init/webview_zygote32.rc...
  2187. [   22.558246] c3   3015 droid-hal-init: Parsing file /system/etc/init/webview_zygote64.rc...
  2188. [   22.565770] c3   3015 droid-hal-init: Parsing file /system/etc/init/wifi-events.rc...
  2189. [   22.573571] c3   3015 droid-hal-init: Parsing file /system/etc/init/wificond.rc...
  2190. [   22.581084] c3   3015 droid-hal-init: /system/etc/init/wificond.rc: 1: ignored duplicate definition of service 'wificond'
  2191. [   22.591836] c3   3015 droid-hal-init: Parsing directory /vendor/etc/init...
  2192. [   22.598911] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.audio@2.0-service.rc...
  2193. [   22.610333] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-service.rc...
  2194. [   22.620863] c2   3015 droid-hal-init: Parsing file /vendor/ec/init/android.hardware.bluetooth@1.0-service.rc...
  2195. [   22.632357] c2   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.boot@1.0-service.rc...
  2196. [   22.641313] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.camera.provider@2.4-service.rc...
  2197. [   22.653391] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...
  2198. [   22.662296] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.configstore@1.0-service.rc...
  2199. [   22.674861] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.contexthub@1.0-service.rc...
  2200. [   22.685648] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.rc...
  2201. [   22.694526] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.widevine.rc...
  2202. [   22.706222] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.dumpstate@1.0-service.marlin.rc...
  2203. [   22.716226] c2   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.gatekeeper@1.0-service.rc...
  2204. [   22.728306] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.gnss@1.0-service.rc...
  2205. [   22.738571] c2   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc...
  2206. [   22.750090] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc...
  2207. [   22.761592] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.keymaster@3.0-service.rc...
  2208. [   22.770999] c3   3015 droid-hal-init: /vendor/etc/init/android.hardware.keymaster@3.0-service.rc: 1: ignored duplicate definition of service 'keymaster-3-0'
  2209. [   22.784732] c3   3015 droid-hal-init: Parsing file /vendor/e2.0-service.rc...
  2210. [   22.796079] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.media.omx@1.0-service.rc...
  2211. [   22.805484] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.memtrack@1.0-service.rc...
  2212. [   22.815540] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.nfc@1.0-service.rc...
  2213. [   22.825164] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.power@1.1-service.marlin.rc...
  2214. [   22.836875] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.sensors@1.0-service.rc...
  2215. [   22.846116] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.usb@1.1-service.marlin.rc...
  2216. [   22.856354] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.vibrator@1.0-service.marlin.rc...
  2217. [   22.866991] c2   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.vr@1.0-service.rc...
  2218. [   22.878233] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...
  2219. [   22.888593] c2   3015 droid-hal-init: Parsing file /vendor/etc/init/hostapd.android.rc...
  2220. [   22.898310] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/init.diag.rc...
  2221. [   22.905187] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/init.nanohub.rc...
  2222. [   22.913079] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/init.rc...
  2223. [   22.921476] c3   3015 droid-hal-init: /vendor/etc/init/init.rc: 773: ignored duplicate definition of service 'bugreport'
  2224. [   22.931454] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/init.usb.rc...
  2225. [   22.940648] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/rild.rc...
  2226. [   22.947176] c3   3015 droid-hal-init: Parsing file /vendor/etc/init/vndservicemanager.rc...
  2227. [   22.955414] c3   3015 droid-hal-init: /vendor/etc/init/vndservicemanager.rc: 1: ignored duplicate definition of service 'vndservicemanager'
  2228. [   22.967733] c3   3015 droid-hal-init: Parsing file /odm/etc/2.973951] c3   3015 droid-hal-init: Unable to open '/odm/etc/init': No such file or directory
  2229. [   22.982681] c3   3015 droid-hal-init: processing action (ear
  2230. [   22.990791] c3   3015 droid-hal-init: processing action (early-init) from (/vendor/etc/init/init.rc:16)
  2231. [   23.000079] c3   3015 droid-hal-init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
  2232. [   23.009659] c3   3015 droid-hal-init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
  2233. [   23.019455] c3   3015 droid-hal-init: /dev/hw_random not found
  2234. [   23.025252] c3   3015 droid-hal-init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
  2235. [   23.034826] c3   3015 droid-hal-init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
  2236. [   23.043706] c3   3015 droid-hal-init: processing action (keychord_init) from (<Builtin Action>:0)
  2237. [   23.052537] c3   3015 keychord: using input dev qpnp_pon for fevent
  2238. [   23.058743] c3   3015 keychord: using input dev HDMI CEC User or Deck Control for fevent
  2239. [   23.066831] c3   3015 keychord: using input dev gpio-keys for fevent
  2240. [   23.073177] c3   3015 droid-hal-init: processing action (console_init) from (<Builtin Action>:0)
  2241. [   23.081956] c3   3015 droid-hal-init: processing action (init) from (/init.rc:41)
  2242. [   23.089609] c3   3015 droid-hal-init: loglevel: invalid log level 64
  2243. [   23.097660] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
  2244. [   23.105642] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
  2245. [   23.114615] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
  2246. [   23.123548] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
  2247. [   23.132495] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
  2248. [   23.141419] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
  2249. [   23.150401] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/cpus': No such file or directory
  2250. [   23.159267] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/mems': No such file or directory
  2251. [   23.168768] c3   3015 Registered swp emulation handler
  2252. [   23.173362] c3   3015 droid-hal-init: Unable to open '/sys/class/leds/vibrator/trigger': No such file or directory
  2253. [   23.183670] c3   3015 droid-hal-init: processing action (init) from (/init.environ.rc:2)
  2254. [   23.191775] c3   3015 droid-hal-init: processing action (init) from (/system/etc/init/lineage-iosched.rc:1)
  2255. [   23.202336] c3   3015 droid-hal-init: processing action (init) from (/system/etc/init/lineage-system.rc:2)
  2256. [   23.211094] c3   3015 droid-hal-init: processing action (init) from (/vendor/etc/init/init.rc:20)
  2257. [   23.223306] c2   3015 droid-hal-init: starting service 'qseecomd'...
  2258. [   23.229245] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/kernel/cpus': Permission denied
  2259. [   23.237521] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/kernel/mems': Permission denied
  2260. [   23.246500] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/cpus': Permission denied
  2261. [   23.255235] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/mems': Permission denied
  2262. [   23.264196] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/performance/cpus': Permission denied
  2263. [   23.273982] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/performance/mems': Permission denied
  2264. [   23.283997] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/background/cpus': Permission denied
  2265. [   23.293690] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/system/background/mems': Permission denied
  2266. [   23.295243] c1   3067 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  2267. [   23.313028] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/cpus': Permission denied
  2268. [   23.322256] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/mems': Permission denied
  2269. [   23.331495] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/performance/cpus': Permission denied
  2270. [   23.341719] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/performance/mems': Permission denied
  2271. [   23.352182] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/background/cpus': Permission denied
  2272. [   23.362262] c3   3015 droid-hal-init: Unable to open '/dev/cpuset/application/background/mems': Permission denied
  2273. [   23.372961] c2   3015 droid-hal-init: processing action (init) from (/vendor/etc/init/init.usb.rc:1)
  2274. [   23.381690] c2   3015 droid-hal-init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
  2275. [   23.391431] c2   3015 droid-hal-init: /dev/hw_random not found
  2276. [   23.397249] c2   3015 droid-hal-init: processing action (late-init) from (/init.rc:268)
  2277. [   23.405246] c2   3015 droid-hal-init: processing action (queue_property_triggers) from (<Builtin Action>:0)
  2278. [   23.414970] c2   3015 droid-hal-init: processing action (ready) from (/init.rc:759)
  2279. [   23.422591] c2   3015 droid-hal-init: starting service 'droid_init_done'...
  2280. [   23.429897] c2   3015 droid-hal-init: processing action (fs) from (/system/etc/init/logd.rc:18)
  2281. [   23.438321] c2   3015 droid-hal-init: processing action (fs) from (/system/etc/init/wifi-events.rc:17)
  2282. [   23.447510] c2   3015 droid-hal-init: processing action (fs) from (/vendor/etc/init/init.rc:104)
  2283. [   23.456279] c2   3015 droid-hal-init: Parsing file /odm/etc/init...
  2284. [   23.462592] c2   3015 droid-hal-init: Unable to open '/odm/etc/init': No such file or d[  OK  ] Started droid-hal-init.
  2285. [   23.472008] c2   3015 droid-hal-init: starting service 'hwseemanager'...
  2286. [   23.481479] c2   3015 droid-hal-init: processing action (post-fs) from (/init.rc:301)
  2287. [   23.481748] c0   3075 droid-hal-init: couldn't write 3075 to /dev/cpuset/system-background/tasks: No space left on device
  2288. [   23.500916] c3   3015 droid-hal-init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
  2289. [   23.513996] c3   3015 droid-hal-init: property_set("ro.telep failed: property already set
  2290. [   23.524278] c3   3015 droid-hal-init: property_set("ro.vendor.extension_library", "libqti-perfd-client.so") failed: property already set
  2291. [   23.536504] c3   3015 droid-hal-init: property_set("ro.openg", "196610") failed: property already set
  2292. [   23.546631] c3   3015 droid-hal-init: property_set("ro.qcom.adreno.qgl.ShaderStorageImageExtendedFormats", "0") failed: property already set
  2293. [   23.559213] c3   3015 droid-hal-init: property_set("ro.hwui.size", "1") failed: property already set
  2294. [   23.569678] c3   3015 droid-hal-init: property_set("ro.hwui.drop_shadow_cache_size", "6") failed: property alre  23.580306] c3   3015 droid-hal-init: property_set("ro.hwui.r_buffer_cache_size", "8") failed: property already set
  2295. [   23.589774] c3   3015 droid-hal-init: property_set("ro.hwui.t: property_set("ro.hwui.text_small_cache_width", "1024") failed: property already set
  2296. [   23.611650] c3   3015 droid-hal-init: property_set("ro.hwui.ht", "1024") failed: property already set
  2297. [   23.622675] c3   3015 droid-hal-init: property_set("ro.hwui.text_large_cache_width", "2048") failed: property already set
  2298. [   23.633621] c3   3015 droid-hal-init: property_set("ro.hwui.text_large_cache_height", "1024") failed: property already set
  2299. [   23.644655] c3   3015 droid-hal-init: property_set("ro.hardware.power", "marlin") failed: property already set
  2300. [   23.654625] c3   3015 droid-hal-init: property_set("ro.qc.sdk.audio.fluencetype", "fluencepro") failed: property already set
  2301. [  OK  ] Reached target Basic System.
  2302. [   23.665965] c3   3015 droid-hal-init: property_set("ro.telephony.default_network", "10") failed: property already set
  2303. [   23.680605] c3   3015 droid-hal-init: property_set("ro.bt.bdaddr_path", "/sys/module/bdaddress/parameters/bdaddress") failed: property already set
  2304. [   23.693682] c3   3015 droid-hal-init: property_set("ro.cp_sy) failed: property already set
  2305. [   23.703752] c3   3015 droid-hal-init: property_set("ro.camera.notify_nfc", "1") failed: property already set
  2306. [   23.713558] c3   3015 droid-hal-init: property_set("ro.frp.pst", "/dev/block/platform/soc/624000.ufshc/by-name/frp") failed: property already set
  2307. [   23.726599] c3   3015 droid-hal-init: property_set("ro.crypt3:3:1") failed: property already set
  2308. [   23.737087] c3   3015 droid-hal-init: property_set("ro.vendor.vndk.version", "26.1.0") failed: property already set
  2309. [   23.747502] c3   3015 droid-hal-init: property_set("ro.sf.lcd_density", "560") failed: property already set
  2310. [   23.757236] c3   3015 droid-hal-init: property_set("ro.config.vc_call_vol_steps", "7") failed: property already set
  2311. [   23.767699] c3   3015 droid-hal-init: property_set("ro.hwui.texture_cache_size", "72") failed: property already set
  2312. [   23.767711] c3   3015 droid-hal-init: property_set("ro.hwui.layer_cache_size", "48") failed: property already set
  2313. [   23.767721] c3   3015 droid-hal-init: property_set("ro.hwui.path_cache_size", "32") failed: property already set
  2314. [   23.767731] c3   3015 droid-hal-init: property_set("ro.adb.secure", "1") failed: property already set
  2315. [   23.767741] c3   3015 droid-hal-init: property_set("ro.config.ringtone", "Zen.ogg") failed: property already set
  2316. [   23.767750] c3   3015 droid-hal-init: property_set("ro.config.notification_sound", "Chime.ogg") failed: property already set
  2317. [   23.767759] c3   3015 droid-hal-init: property_set("ro.config.alarm_alert", "Flow.ogg") failed: property already set
  2318. [   23.767784] c3   3015 droid-hal-init: property_set("ro.com.google.clientidbase", "android-google") failed: property already set
  2319. [   23.767811] c3   3015 droid-hal-init: property_set("ro.carri, "unknown") failed: property already set
  2320. [   23.767902] c3   3015 droid-hal-init: property_set("ro.storage_manager.enabled", "true") failed: property already set
  2321. [   23.767917] c3   3015 droid-hal-init: property_set("ro.boot.vendor.overlay.theme", "com.google.android.theme.pixel") failed: property already set
  2322. [   23.767955] c3   3015 droid-hal-init: Couldn't load propertyn '/factory/factory.prop': No such file or directory: No such file or directory
  2323. [   23.778471] c2   3015 droid-hal-init: /recovery not specifie  23.778507] c2   3015 droid-hal-init: Command 'load_system_props' action=post-fs (/init.rc:307) returned 0 took 278ms.
  2324. [   23.778563] c2   3015 droid-hal-init: starting service 'logdg service 'servicemanager'...
  2325. [   23.779232] c2   3015 droid-hal-init: starting service 'vndservicemanager'...
  2326. [   23.779867] c2   3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/atrace.rc:3)
  2327. [   23.780078] c1   3299 droid-hal-init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
  2328. [   23.780219] c1   3299 droid-hal-init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
  2329. [   23.780337] c1   3299 droid-hal-init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
  2330. [   23.780379] c1   3299 droid-hal-init: Opened file '/proc/kmsg', flags 0
  2331. [   23.780412] c1   3299 droid-hal-init: Opened file '/dev/kmsg', flags 1
  2332. [   23.780513] c1   3299 droid-hal-init: couldn't write 3299 to /dev/cpuset/system-background/tasks: No space left on device
  2333. [   23.781121] c1   3301 droid-hal-init: couldn't write 3301 to /dev/cpuset/system-background/tasks: No space left on device
  2334. [   23.782142] c2   3015 droid-hal-init: Unable to open '/sys/kernel/tracing/tracing_on': Permission denied
  2335. [   23.782246] c2   3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/atrace_userdebug.rc:6)
  2336. [   23.782881] c2   3015 droid-hal-init: processing action (post-fs) from (/system/etc/init/recovery-refresh.rc:1)
  2337. [   23.782963] c2   3015 droid-hal-init: starting service 'exec 1 (/system/bin/recovery-refresh)'...
  2338. [   23.783274] c2   3015 droid-hal-init: SVC_EXEC pid 3304 (uid 1000 gid 1007+0 context default) started; waiting...
  2339. [   23.783542] c1   3302 droid-hal-init: couldn't write 3302 to /dev/cpuset/system-background/tasks: No space left on device
  2340. [   23.793744] c2   3015 droid-hal-init: Service 'exec 1 (/system/bin/recovery-refresh)' (pid 3304) killed by signal 126 waiting took 0.010000 seconds
  2341. [   23.793823] c2   3015 droid-hal-init: processing action (posc/init/android.hardware.usb@1.1-service.marlin.rc:6)
  2342. [   23.794064] c2   3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.nanohub.rc:1)
  2343. [   23.794130] c2   3015 droid-hal-init: starting service 'flash-nanohub-fw'...
  2344. [   23.794487] c2   3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.rc:120)
  2345. [   23.794540] c2   3015 droid-hal-init: start_waiting_for_property("sys.listeners.registered", "true"): already set
  2346. [   23.794553] c2   3015 droid-hal-init: processing action (post-fs) from (/vendor/etc/init/init.usb.rc:20)
  2347. [   23.794614] c2   3015 droid-hal-init: Unable to write to '/sys/class/android_usb/android0/f_ffs/aliases': Device or resource busy
  2348. [   23.795397] c2   3015 ffs_data_put(): freeing
  2349. [   23.796151  3015 ffs_data_put(): freeing
  2350. [   23.796181] c2   3015 droid-hal-init: processing action (late-fs) from (/init.rc:361)
  2351. [   23.798013] c2   3015 droid-hal-init: starting service 'boot-hal-1-0'...
  2352. [   23.798371] c2   3015 droid-hal-init: processing action (late-fs) from (/vendor/etc/init/init.rc:125)
  2353. [   23.798418] c2   3015 droid-hal-init: starting service 'devstart_sh'...
  2354. [   23.799033] c2   3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
  2355. [   23.799083] c2   3015 droid-hal-init: starting service 'boot c2   3015 droid-hal-init: starting service 'hwcomposer-2-1'...
  2356. [   23.799704] c2   3015 droid-hal-init: starting service 'configstore-hal-1-0'...
  2357. [   23.799998] c2   3015 droid-hal-init: starting service 'gralloc-2-0'...
  2358. [   23.800531] c2   3015 droid-hal-init: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
  2359. [   23.800554] c2   3015 droid-hal-init: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
  2360. [   23.800595] c2   3015 droid-hal-init: starting service 'time_daemon'...
  2361. [   23.800951] c2   3015 droid-hal-init: processing action (post-fs-data) from (/init.rc:369)
  2362. [   23.801107] c2   3015 droid-hal-init: cannot find '/system/bin/vold_HYBRIS_DISABLED', disabling 'vold': No such file or directory
  2363. [   23.805926] c0   3015 droid-hal-init: Unable to open '/data/m/entropy.dat': No such file or directory
  2364. [   23.807452] c0   3015 droid-hal-init: Unable to open '/data/misc/recovery/ro.build.fingerprint': No such file or directory
  2365. [   23.807631] c0   3015 droid-hal-init: Unable to open '/data/misc/recovery/ro.build.fingerprint': No such file or directory
  2366. [   23.807760] c0   3015 droid-hal-init: Unable to open '/data/misc/recovery/proc/version': No such file or directory
  2367. [   23.807953] c0   3015 droid-hal-init: Unable to open '/data/misc/recovery/proc/version': No such file or directory
  2368. [   23.822294] c0   3015 droid-hal-init: Service 'time_daemon' (pid 3327) killed by signal 106
  2369. [   23.822314] c0   3015 droid-hal-init: Sending signal 9 to service 'time_daemon' (pid 3327) process group... HYBRIS: killing PID instead of process group.
  2370. [   23.825620] c2   3299 logd.auditd: start
  2371. [   23.825645] c2 85
  2372. [   23.833195] c0   3015 droid-hal-init: starting service 'exec 2 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)'...
  2373. [   23.833612] c0   3015 droid-hal-init: SVC_EXEC pid 3343 (uid+0 context default) started; waiting...
  2374. [   23.856999] c0   3015 droid-hal-init: Service 'exec 2 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)' (pid 3343) exited with status 0 waiting took 0.023000 seconds
  2375. [   23.857118] c0   3015 droid-hal-init: processing action (pos] c0   3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/lineage-ssh.rc:1)
  2376. [   23.859694] c0   3015 droid-hal-init: processing action (posneage-system.rc:6)
  2377. [   23.859795] c0   3015 droid-hal-init: starting service 'sysinit'...
  2378. [   23.860383] c0   3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/lineage-updates.rc:1)
  2379. [   23.862757] c0   3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/logtagd.rc:4)
  2380. [   23.862895] c0   3015 droid-hal-init: Unable to open '/data/misc/logd/event-log-tags': No such file or directory
  2381. [   23.862996] c0   3015 droid-hal-init: processing action (post-fs-data) from (/system/etc/init/otapreopt.rc:3)
  2382. [   23.863096] c0   3015 droid-hal-init: starting service 'exec 3 (/system/bin/otapreopt_slot)'...
  2383. [   23.863522] c0   3015 droid-hal-init: SVC_EXEC pid 3367 (uid 0 gid 0+0 context default) started; waiting...
  2384. [   23.882295] c1   3316 nanohub nanohub: nanohub_download_bl: err=-2
  2385. [   24.258927] c0   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2386. [   24.532623] c3   3321 adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP         Starting Oneshot stuff for root...[   24.542632] c3   3059 subsys-pil-tz 9300000.qcom,lpass: adsp: Failed to locate adsp.mdt
  2387.  
  2388. [   24.553331] c3   3321 sensors-ssc soc:qcom,msm-ssc-sensorser: adsp_load_fw: pil get failed,
  2389. [   24.571795] c3   3059 adsp-loader soc:qcom,msm-adsp-loader: adsp_load_fw: Q6 image loading failed
  2390. [   24.576959] c0   3015 droid-hal-init: Service 'exec 3 (/system/bin/otapreopt_slot)' (pid 3367) exited with status 0 waiting took 0.713000 seconds
  2391. [   24.577105] c0   3015 droid-hal-init: processing action (posstem/etc/init/recovery-persist.rc:1)
  2392. [   24.577310] c0   3015 droid-hal-init: starting service 'exec 4 (/system/bin/recovery-persist)'...
  2393. [   24.577698] c0   3015 droid-hal-init: SVC_EXEC pid 4621 (uid 1000 gid 1007+0 context default) started; waiting...
  2394. [   24.587035] c0   3015 droid-hal-init: Service 'exec 4 (/system/bin/recovery-persist)' (pid 4621) exited with status 0 waiting took 0.009000 seconds
  2395. [   24.587151] c0   3015 droid-hal-init: processing action (posor/etc/init/hostapd.android.rc:9)
  2396. [   24.587257] c0   3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.nanohub.rc:7)
  2397. [   24.587400] c0   3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.nanohub.rc:23)
  2398. [   24.587464] c0   3015 droid-hal-init: processing action (post-fs-data) from (/vendor/etc/init/init.rc:151)
  2399. [   24.587514] c0   3015 droid-hal-init: cannot find '/system/bin/netd_HYBRIS_DISABLED', disabling 'netd': No such file or directory
  2400. [   24.587558] c0   3015 droid-hal-init: starting service 'mid_.
  2401. [   24.636715] c1   3015 droid-hal-init: Service 'devstart_sh' (pid 3321) exited with status 0
  2402. [   24.643407] c0   3015 droid-hal-init: Service 'mid_sh' (pid 4624) exited with ⸮         Starting Login Service...[   24.710235] c3   3059 adsp_load_fw: trigger BUG due to Q6/ADSP image is loaded failed
  2403. [   24.711602] c2   3015 droid-hal-init: Service 'sysinit' (pidce 'flash-nanohub-fw' (pid 3316) exited with status 0
  2404.  
  2405. [   24.736765] c3   3059 subsys-pil-tz 1c00000.qcom,ssc: slpi: Failed to locate slpi.mdt
  2406. [   24.745804] c3   3059 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: pil get failed,
  2407. [   24.753014] c3   3059 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: SLPI image loading failed
  2408. [  OK  ] Started droid-late-start.
  2409.          Starting Indicate boot is done...
  2410.          Starting Disk Manager...
  2411.          Starting Handle udisks sd mount...
  2412.          Starting Nemo device lock daemon...
  2413.          Starting Telephony service...
  2414. [  OK  ] Started Oneshot stuff for root.
  2415. [   24.896137] c1   3015 droid-hal-init: Service 'droid_init_done' (pid 3070) exited with status 0
  2416. [   24.919322] c0   5116 FG: fg_vbatt_low_handler: vbatt-low ⸮[  OK  ] [   24.924784] c0    427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2417. Started Telephony service.
  2418. [   24.935013] c0    427 SMBCHG: smGrʢ⸮⸮⸮⸮⸮c0    427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2419. [  OK  [   24.954145] c0    422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  2420. ] Started Login Service.
  2421.          Starting Authorization Manager...
  2422.          Starting Connection service...
  2423.          Starting Permit User Sessions...
  2424.          Starting Sensor daemon for sensor framework...
  2425. [  OK  ] Started Nemo device lock daemon.
  2426. [  OK  ] Started Permit User Sessions.
  2427. [  OK  ] Started Authorization Manager.
  2428. [  OK  ] Started Sensor daemon for sensor framework.
  2429. [  OK  ] Started Serial Getty on ttyHSL0.
  2430. [  OK  ] Reached target Login Prompts.
  2431.          Starting Start User Session...
  2432. [  OK  ] Created slice system-autologin.slice.
  2433. [  OK  ] Started Autologin user 100000.
  2434. [  OK  ] Created slice user-100000.slice.
  2435. [  OK  ] Started Session c1 of user nemo.
  2436.          Starting User Manager for UID 100000...
  2437. [   25.259054] c0   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2438. [  OK  ] Started Connection service.
  2439.          Starting Hostname Service...
  2440.          Starting ConnMan VPN service...
  2441.          Starting Bluetooth service...
  2442. [  OK  ] Started Hostname Service.
  2443. [  OK  ] Started ConnMan VPN service.
  2444. [  OK  ] Started Bluetooth service.
  2445.          Starting WPA Supplicant daemon...
  2446. [  OK  ] Started User Manager for UID 100000.
  2447. [  OK  ] Started WPA Supplicant daemon.
  2448. [  OK  ] Reached target Network.
  2449. [   25.994161] c3   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2450. [  OK  ] Started Disk Manager.
  2451. [  OK  ] Started Start User Session.
  2452. [   26.266252] c0   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 l⸮         Starting Inform dsme about runlevel change...
  2453. [  OK  ] Started Inform dsme about runlevel change.
  2454. [FAILED] Failed to start Handle udisks sd mount.
  2455. See 'systemctl status mount-sd@sdd3.service' for details.
  2456. [   27.001249] c3   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2457. [   27.273624] c0   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2458. [   28.008341] c3   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2459. [   28.280759] c0   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2460. [   29.015590] c3   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2461. [   29.287855] c1   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2462. [   30.023367] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2463. [   30.294972] c1   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2464. [   31.030454] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2465.  
  2466.  
  2467. Sailfish OS 3.0.2.8 (Oulanka)
  2468. Kernel 3.18.70-Lineage-g54b61efe09a-dirty on an aarch64
  2469.  
  2470. Sailfish login: [   31.302107] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2471. [   31.343798] c3   3015 droid-hal-init: Service 'servicemanager' (pid 3301) killed by signal 6
  2472. [   31.351435] c2   3015 droid-hal-init: Sending signal 9 to service 'servicemanager' (pid 3301) process group... HYBRIS: killing PID instead of process group.
  2473. [   31.365574] c2   3015 droid-hal-init: starting service 'healc2   3015 droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice', disabling 'miniaf': No such file or directory
  2474. [   31.386217] c2   3015 droid-hal-init: cannot find '/usr/libeo such file or directory
  2475. [   31.399397] c2   3015 droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice', disabling 'minisf': No such file or directory
  2476. [   31.412969] c3   3015 droid-hal-init: Service 'hwservicemanay signal 6
  2477. [   31.421432] c3   3015 droid-hal-init: Sending signal 9 to service 'hwservicemanager' (pid 3075) process group... HYBRIS: killing PID instead of process group.
  2478. [   31.435829] c3   3015 droid-hal-init: starting service 'hidl3015 droid-hal-init: starting service 'audio-hal-2-0'...
  2479. [   31.449365] c3   3015 droid-hal-init: starting service 'bluetooth-1-0'...
  2480. [   31.450398] c1  18047 droid-hal-init: couldn't write 18047 to /dev/cpuset/foreground/tasks: No space left on device
  2481. [   31.466347] c3   3015 droid-hal-init: starting service 'camera-provider-2-4'...
  2482. [   31.473742] c3   3015 droid-hal-init: starting service 'cas-hal-1-0'...
  2483. [   31.474525] c0  18065 droid-hal-init: couldn't write 18065 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2484. [   31.491124] c3   3015 droid-hal-init: Sending signal 9 to service 'configstore-hal-1-0' (pid 3324) process group... HYBRIS: killing PID instead of process group.
  2485. [   31.492117] c0  18077 droid-hal-init: couldn't write 18077 tpace left on device
  2486. [   31.515703] c2   3015 droid-hal-init: starting service 'contexthub-hal-1-0'...
  2487. [   31.524394] c2   3015 droid-hal-init: starting service 'drm-hal-1-0'...
  2488. [   31.530326] c2   3015 droid-hal-init: starting service 'drm-widevine-hal-1-0'...
  2489. [   31.530491] c3  18095 droid-hal-init: couldn't write 18095 to /dev/cpuset/foreground/tasks: No space left on device
  2490. [   31.548674] c2   3015 droid-hal-init: starting service 'dumpstate-1-0'...
  2491. [   31.549701] c0  18108 droid-hal-init: couldn't write 18108 to /dev/cpuset/foreground/tasks: No space left on device
  2492. [   31.565450] c2   3015 droid-hal-init: starting service 'gatekeeper-1-0'...
  2493. [   31.572404] c2   3015 droid-hal-init: starting service 'gnss_service'...
  2494. [   31.582514] c2   3015 droid-hal-init: Sending signal 9 to service 'gralloc-2-0' (pid 3326) process group... HYBRIS: killing PID instead of process group.
  2495. [   31.596085] c2   3015 droid-hal-init: Sending signal 9 to se3323) process group... HYBRIS: killing PID instead of process group.
  2496. [   31.609362] c2   3015 droid-hal-init: starting service 'lighl-2-0'...
  2497. [   31.616401] c2   3015 droid-hal-init: starting service 'memtrack-hal-1-0'...
  2498. [   31.623379] c2   3015 droid-hal-init: starting service 'nfc_hal_service'...
  2499. [   31.630324] c2   3015 droid-hal-init: starting service 'power-hal-1-1'...
  2500. [   31.637559] c2   3015 droid-hal-init: starting service 'sensors-hal-1-0'...
  2501. [   31.644344] c2   3015 droid-hal-init: starting service 'usb-hal-1-1'...
  2502. [   31.650971] c2   3015 droid-hal-init: starting service 'vibrator-1-0'...
  2503. [   31.657634] c2   3015 droid-hal-init: starting service 'vr-1-0'...
  2504. [   31.663790] c2   3015 droid-hal-init: starting service 'wifi_hal_legacy'...
  2505. [   31.670784] c2   3015 droid-hal-init: Command 'class_restart hal' action=onrestart (<Service 'hwservicemanager' onrestart>:2) returned 0 took 235ms.
  2506. [   31.683657] c2   3015 droid-hal-init: cannot find '/odm/bin/master@3.0-service-qti_HYBRIS_DISABLED', disabling 'keymaster-3-0': No such file or directory
  2507. [   31.699348] c2   3015 droid-hal-init: Sending signal 9 to se19) process group... HYBRIS: killing PID instead of process group.
  2508. [   31.713608] c2   3015 droid-hal-init: Service 'boot-hal-1-0'pid 3319) killed by signal 9
  2509. [   31.721213] c2   3015 droid-hal-init: Service 'hwcomposer-2-1' (pid 3323) killed by signal 9
  2510. [   31.729564] c2   3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
  2511. [   31.743034] c2   3015 droid-hal-init: Service 'configstore-hd by signal 9
  2512. [   31.751956] c3   3015 droid-hal-init: Service 'gralloc-2-0' (pid 3326) killed by signal 9
  2513. [   31.759970] c3   3015 droid-hal-init: cannot find '/system/bin/surfaceflinger_HYBRIS_DISABLED', disabling 'surfaceflinger': No such file or directory
  2514. [   31.773400] c3   3015 droid-hal-init: Service 'vibrator-1-0'ignal 115
  2515. [   31.781859] c3   3015 droid-hal-init: Sending signal 9 to service 'vibrator-1-0' (pid 18170) process group... HYBRIS: killing PID instead of process group.
  2516. [   32.037522] c3   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2517. [   32.309868] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2518. [   33.044619] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2519. [   33.316905] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2520. [   33.709789] c0      0 FG: fg_vbatt_low_handler: vbatt-low triggered
  2521. [   33.715245] c0    427 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2522. [   33.724345] c0    427 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  2523. [   33.731375] c0    427 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2524. [   33.739991] c0    422 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  2525. [   34.051681] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2526. [   34.323932] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2527. [   35.058707] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2528. [   35.330946] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2529. [   36.065738] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2530. [   36.337982] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2531. [   37.072770] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2532. [   37.345004] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2533. [   38.079849] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2534. [   38.352065] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2535. [   38.782262] c1    425 FG: fg_is_batt_id_valid: fg batt sts 0x28
  2536. [   39.086872] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2537. [   39.359079] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2538. [   40.093889] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2539. [   40.366147] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2540. [   41.100922] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2541. [   41.373381] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2542. [   41.395571] [BATT] chg_full_check_worker: vol:4216, curr=255, is_full_count=0, is_full=0 at 41393721778 (2019-03-13 08:17:53.881254423 UTC)
  2543. [   42.107944] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2544. [   42.380422] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2545. [   43.114973] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2546. [   43.387449] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2547. [   44.122028] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2548. [   44.394476] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2549. [   45.129103] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2550. [   45.403548] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2551. [   45.763095] c2   3015 droid-hal-init: Service 'vndservicemanager' (pid 3302) killed by signal 6
  2552. [   45.770815] c2   3015 droid-hal-init: Sending signal 9 to service 'vndservicemanager' (pid 3302) process group... HYBRIS: killing PID instead of process group.
  2553. [   46.136150] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2554. [   46.411147] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2555. [   47.143168] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2556. [   47.418156] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2557. [   48.150183] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2558. [   48.425166] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2559. [   49.157206] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2560. [   49.432173] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2561. [   50.164231] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2562. [   50.439177] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2563. [   51.171254] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2564. [   51.446170] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2565. [   52.178275] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2566. [   52.453168] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2567. [   53.185290] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2568. [   53.460169] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2569. [   54.192322] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2570. [   54.467175] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2571. [   55.199340] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2572. [   55.474181] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2573. [   55.572406] c0    275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
  2574. [   55.582511] c1    275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
  2575. [   55.592620] c1    275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
  2576. [   55.622256] c2    275 [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
  2577. [   56.086735] c2   2372 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 0->1, chgr_RT_STS=0x10, batif_RT_STS=0x0
  2578. [   56.095851] c2   2372 mdss_fb_set_bl_brightness: bl_dim_status =1
  2579. [   56.206367] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2580. [   56.481189] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2581. [   57.213389] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2582. [   57.488193] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2583. [   58.220404] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2584. [   58.495188] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2585. [   59.031114] c2   2372 qpnp_led.red: b:34 on:50 off:0
  2586. [   59.036321] c2   2372 qpnp_led.green: b:34 on:50 off:0
  2587. [   59.041656] c2   2372 qpnp_led.blue: b:34 on:50 off:0
  2588. [   59.050024] c2   2372 qpnp_led.red: b:34 on:50 off:0
  2589. [   59.055173] c2   2372 qpnp_led.green: b:34 on:50 off:0
  2590. [   59.060507] c2   2372 qpnp_led.blue: b:34 on:50 off:0
  2591. [   59.068869] c2   2372 qpnp_led.red: b:34 on:50 off:0
  2592. [   59.074019] c2   2372 qpnp_led.green: b:34 on:50 off:0
  2593. [   59.079362] c2   2372 qpnp_led.blue: b:34 on:50 off:0
  2594. [   59.103804] c2   2372 SMBCHG: pmi8996_charger_batfet_switch: Batfet WA 1->0, chgr_RT_STS=0x10, batif_RT_STS=0x0
  2595. [   59.112917] c2   2372 mdss_fb_set_bl_brightness: bl_dim_status =0
  2596. [   59.227416] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2597. [   59.502203] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2598. [   60.234433] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2599. [   60.509212] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2600. [   61.241469] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2601. [   61.448874] [BATT] chg_full_check_worker: vol:4216, curr=255, is_full_count=0, is_full=0 at 61446932057 (2019-03-13 08:18:13.934560640 UTC)
  2602. [   61.516236] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2603. [   62.248481] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2604. [   62.523259] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2605. [   63.255490] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2606. [   63.530280] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2607. [   64.262510] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2608. [   64.537311] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2609. [   65.269527] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2610. [   65.544422] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2611. [   66.276554] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2612. [   66.551419] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2613. [   67.283579] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2614. [   67.558430] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2615. [   68.290662] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2616. [   68.565442] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2617. [   68.862240] c1     18 FG: fg_is_batt_id_valid: fg batt sts 0x28
  2618. [   69.297675] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2619. [   69.572449] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2620. [   70.304689] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2621. [   70.579457] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2622. [   71.311715] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2623. [   71.586468] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2624. [   72.318744] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2625. [   72.593472] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2626. [   73.325771] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2627. [   73.600541] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2628. [   74.332821] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2629. [   74.607561] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2630. [   75.339847] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2631. [   75.614573] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2632. [   76.346859] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2633. [   76.621639] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2634. [   77.353865] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2635. [   77.628660] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2636. [   78.360885] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2637. [   78.635669] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2638. [   79.367910] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2639. [   79.642670] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2640. [   80.374938] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2641. [   80.649757] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2642. [   81.381964] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2643. [   81.502206] [BATT] chg_full_check_worker: vol:4381, curr=-84, is_full_count=1, is_full=0 at 81500271971 (2019-03-13 08:18:33.987894721 UTC)
  2644. [   81.558063] c2    277 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2019-03-13 08:17:33, g_overheat_55_sec = 0, g_total_level_raw = 0
  2645. [   81.570094] c2    277 [BATT] calculate_batt_cycle_info: savery 50%
  2646. [   81.578017] [BATT] ibat_max=3400000,ibat_new=1600000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 81585293907 (2019-03-13 08:18:34.063708583 UTC)
  2647. [   81.598732] [BATT] ibat_total=1600000[1600000,0],ibat_total_50] c2    277 [BATT][SMBCHG] 0x1010=10,0x1210=00,0x1242=00,0x1310=04,0x1340=02,0x1608=10,0x1610=01,cc=3476139uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=1,pd_chgr=0,wake_reason=0,smb_curr=12mA,batfet_wa=0
  2648. [   81.632668] c2    277 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,6e,8[F6:FB]=[03,3b,2a,04,c8,41]
  2649. [   81.653530] [BATT][SMBCHG] USB_STS[07:0B]=[10,02,22,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,04,25],MISC_CFG[F5:F9]=[38,18,91,e0,00],MISC_CFG[FA:FF]=[00,03,22,04,e0,02],[   81.656766] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2650.  
  2651. [   81.681210] c2    277 SMB1351[00:06]=[02,1c,87,ef,08,11,6bx_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,htc_ext=0x00,usb_temp=277,usb_overheat=0,level_accu=0 at 81706565325 (2019-03-13 08:18:34.174925937 UTC)
  2652. [   81.720004] [BATT] Device is at booting stage at 81715328451[   82.389058] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2653. [   82.656875] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2654. [   83.396075] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2655. [   83.663897] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2656. [   84.403094] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2657. [   84.670916] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2658. [   85.410125] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2659. [   85.677990] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2660. [   86.417159] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2661. [   86.685015] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2662. [   87.424190] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2663. [   87.692141] c2   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2664. [   88.431223] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2665. [   88.699154] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2666. [   89.438253] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2667. [   89.706164] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2668. [   90.445363] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2669. [   90.713179] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2670. [   91.452386] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2671. [   91.720196] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2672. [   92.459418] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2673. [   92.727213] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2674. [   93.466556] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2675. [   93.734230] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2676. [   94.473595] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2677. [   94.741237] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2678. [   95.480623] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2679. [   95.748249] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2680. [   96.487654] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2681. [   96.755263] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2682. [   97.494764] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2683. [   97.762287] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2684. [   98.501778] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2685. [   98.769305] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2686. [   98.942225] c1     18 FG: fg_is_batt_id_valid: fg batt sts 0x28
  2687. [   99.508804] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2688. [   99.776318] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2689. [  100.515828] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2690. [  100.783334] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2691. [  101.522853] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2692. [  101.555545] [BATT] chg_full_check_worker: vol:4389, curr=-73, is_full_count=2, is_full=0 at 101553602823 (2019-03-13 08:18:54.041237656 UTC)
  2693. [  101.790331] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2694. [  102.529869] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2695. [  102.797333] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2696. [  103.536885] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2697. [  103.804334] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2698. [  104.543893] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2699. [  104.811342] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2700. [  105.550900] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2701. [  105.818351] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2702. [  106.557917] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2703. [  106.825359] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2704. [  107.565047] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2705. [  107.832367] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2706. [  108.572064] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2707. [  108.839374] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2708. [  109.579080] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2709. [  109.846378] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2710. [  110.586097] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2711. [  110.853381] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2712. [  111.593102] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2713. [  111.860396] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2714. [  112.600102] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2715. [  112.794240] c0    301 FG: fg_soc_irq_handler: triggered 0x25
  2716. [  112.799409] c0   3039 SMBCHG: smbchg_external_power_changed: usb type = 4, current_limit = 500, rc = 0
  2717. [  112.808755] c0   3039 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
  2718. [  112.815464] c0   3039 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
  2719. [  112.823746] c0   3066 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
  2720. [  112.867423] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2721. [  113.607121] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2722. [  113.874436] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2723. [  114.614153] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2724. [  114.881452] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2725. [  115.621186] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2726. [  115.888460] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2727. [  116.628207] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2728. [  116.895462] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2729. [  117.635227] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2730. [  117.902463] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2731. [  118.642245] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2732. [  118.909474] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2733. [  119.649339] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2734. [  119.916512] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2735. [  120.656369] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2736. [  120.923518] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2737. [  121.608883] [BATT] chg_full_check_worker: vol:4389, curr=-73, is_full_count=3, is_full=1 at 121606939300 (2019-03-13 08:19:14.094573091 UTC)
  2738. [  121.663400] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2739. [  121.930527] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2740. [  122.670426] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2741. [  122.937535] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2742. [  123.677453] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2743. [  123.944536] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2744. [  124.684483] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2745. [  124.951542] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2746. [  125.691512] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2747. [  125.958549] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2748. [  126.698527] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2749. [  126.965556] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2750. [  127.705544] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
  2751. [  127.972562] c3   3322 binder: 3322:3322 transaction failed 29189/0, size 0-0 line 2157
  2752. [  128.712575] c2   6291 binder: 6291:6291 transaction failed 29189/0, size 0-0 line 2157
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top