Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <5>[ 0.000000] Linux version 3.10.108-d10 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #46052 Thu May 7 07:16:43 +04 2020
- <6>[ 0.000000] bootconsole [early0] enabled
- <6>[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
- <6>[ 0.000000] booting platform Atheros AR7161 rev 2 (0xaa)
- <6>[ 0.000000] Determined physical RAM map:
- <6>[ 0.000000] memory: 04000000 @ 00000000 (usable)
- <4>[ 0.000000] Zone ranges:
- <4>[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- <4>[ 0.000000] Movable zone start for each node
- <4>[ 0.000000] Early memory node ranges
- <4>[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- <7>[ 0.000000] On node 0 totalpages: 16384
- <7>[ 0.000000] free_area_init_node: node 0, pgdat 802db260, node_mem_map 81000000
- <7>[ 0.000000] Normal zone: 128 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- <4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
- <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>[ 0.000000] pcpu-alloc: [0] 0
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
- <6>[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Writing ErrCtl register=00000000
- <6>[ 0.000000] Readback ErrCtl register=00000000
- <6>[ 0.000000] Memory: 61556k/65536k available (2238k kernel code, 3980k reserved, 373k data, 200k init, 0k highmem)
- <6>[ 0.000000] NR_IRQS:83
- <0>[ 0.000000] irq init done
- <4>[ 0.000000] plat_time_init: plat time init done
- <6>[ 0.060000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
- <6>[ 0.060000] pid_max: default: 32768 minimum: 301
- <6>[ 0.060000] Mount-cache hash table entries: 512
- <6>[ 0.070000] NET: Registered protocol family 16
- <4>[ 0.070000] Can't analyze schedule() prologue at 80067d7c
- <4>[ 3.070000] registering PCI controller with io_map_base unset
- <6>[ 3.090000] bio: create slab <bio-0> at 0
- <6>[ 3.090000] PCI host bridge to bus 0000:00
- <6>[ 3.100000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
- <6>[ 3.100000] pci_bus 0000:00: root bus resource [io 0x0000]
- <6>[ 3.110000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- <7>[ 3.110000] pci 0000:00:00.0: [168c:ff1d] type 00 class 0x020000
- <6>[ 3.140000] found calibration data for slot 0 on 0xBF7F1000
- <6>[ 3.150000] PCI: fixup device 0000:00:00.0
- <7>[ 3.160000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff]
- <7>[ 3.160000] pci 0000:00:00.0: PME# supported from D0 D3hot
- <7>[ 3.160000] pci 0000:00:01.0: [168c:ff1d] type 00 class 0x020000
- <6>[ 3.180000] found calibration data for slot 1 on 0xBF7F5000
- <6>[ 3.190000] PCI: fixup device 0000:00:01.0
- <7>[ 3.200000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
- <7>[ 3.200000] pci 0000:00:01.0: PME# supported from D0 D3hot
- <7>[ 3.200000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- <6>[ 3.200000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
- <6>[ 3.200000] pci 0000:00:01.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
- <6>[ 3.210000] Switching to clocksource MIPS
- <6>[ 3.210000] NET: Registered protocol family 2
- <6>[ 3.220000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- <6>[ 3.220000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- <6>[ 3.230000] TCP: Hash tables configured (established 512 bind 512)
- <6>[ 3.230000] TCP: reno registered
- <6>[ 3.240000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 3.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 3.250000] NET: Registered protocol family 1
- <7>[ 3.250000] PCI: CLS 0 bytes, default 32
- <5>[ 3.250000] gpio_proc: module loaded and /proc/gpio/ created
- <6>[ 3.260000] Register LED Device
- <5>[ 3.260000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
- <4>[ 3.270000] AR7100 GPIOC major 0
- <6>[ 3.270000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- <6>[ 3.280000] msgmni has been set to 120
- <6>[ 3.280000] io scheduler noop registered
- <6>[ 3.290000] io scheduler deadline registered (default)
- <6>[ 3.290000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- <6>[ 3.320000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
- <6>[ 3.330000] console [ttyS0] enabled, bootconsole disabled
- <0>[ 3.340000] guessed flashsize = 8M
- <0>[ 3.340000] scanning for root partition
- <0>[ 3.350000] WNDR3700 uboot detected
- <0>[ 3.350000] bootloader size = 70000
- <0>[ 3.360000]
- <0>[ 3.360000] found squashfs at 170000
- <5>[ 3.360000] Creating 8 MTD partitions on "ar7100-nor0":
- <5>[ 3.370000] 0x000000000000-0x000000070000 : "RedBoot"
- <5>[ 3.370000] 0x000000070000-0x000000800000 : "linux"
- <5>[ 3.380000] 0x000000170000-0x000000770000 : "rootfs"
- <5>[ 3.390000] mtd: partition "rootfs" set to be root filesystem
- <5>[ 3.390000] 0x000000770000-0x0000007e0000 : "ddwrt"
- <5>[ 3.400000] 0x0000007e0000-0x0000007f0000 : "nvram"
- <5>[ 3.400000] 0x0000007f0000-0x000000800000 : "FIS directory"
- <5>[ 3.410000] 0x0000007f0000-0x000000800000 : "board_config"
- <5>[ 3.420000] 0x000000000000-0x000000800000 : "fullflash"
- <4>[ 3.420000] ->Oops: flash id 0xc22017 .
- <4>[ 3.430000] Found an RTL8366S switch
- <5>[ 3.430000] Realtek RTL8366S ethernet switch driver version 0.2.2
- <6>[ 3.440000] rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
- <6>[ 3.440000] rtl8366s rtl8366s: RTL8366 ver. 1 chip found
- <6>[ 3.490000] libphy: rtl8366s: probed
- <6>[ 3.890000] PPP generic driver version 2.4.2
- <6>[ 3.900000] PPP BSD Compression module registered
- <6>[ 3.900000] PPP Deflate Compression module registered
- <6>[ 3.910000] PPP MPPE Compression module registered
- <6>[ 3.910000] NET: Registered protocol family 24
- <6>[ 3.930000] u32 classifier
- <6>[ 3.930000] Performance counters on
- <6>[ 3.940000] input device check on
- <6>[ 3.940000] Actions configured
- <6>[ 3.940000] Netfilter messages via NETLINK v0.30.
- <6>[ 3.950000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
- <4>[ 3.950000] nf_conntrack_rtsp v0.7 loading
- <4>[ 3.960000] nf_nat_rtsp v0.7 loading
- <6>[ 3.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 3.970000] TCP: bic registered
- <6>[ 3.970000] TCP: cubic registered
- <6>[ 3.970000] TCP: westwood registered
- <6>[ 3.980000] TCP: highspeed registered
- <6>[ 3.980000] TCP: hybla registered
- <6>[ 3.980000] TCP: htcp registered
- <6>[ 3.990000] TCP: vegas registered
- <6>[ 3.990000] TCP: veno registered
- <6>[ 3.990000] TCP: scalable registered
- <6>[ 4.000000] TCP: lp registered
- <6>[ 4.000000] TCP: yeah registered
- <6>[ 4.000000] TCP: illinois registered
- <6>[ 4.010000] NET: Registered protocol family 17
- <5>[ 4.010000] Bridge firewalling registered
- <6>[ 4.020000] 8021q: 802.1Q VLAN Support v1.8
- <6>[ 4.020000] searching for nvram
- <6>[ 4.020000] nvram size = 65536
- <6>[ 4.060000] Atheros AR71xx hardware watchdog driver version 0.1.0
- <6>[ 4.070000] ar71xx-wdt: timeout=15 secs (max=25) ref freq=170000000
- <6>[ 4.080000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- <6>[ 4.080000] Freeing unused kernel memory: 200K
- <7>[ 6.550000] ar71xx-wdt: enabling watchdog timer
- <6>[ 6.890000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
- <6>[ 7.210000] ag71xx ag71xx.1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Generic PHY]
- <6>[ 7.220000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
- <7>[ 7.370000] ar71xx: pll_reg 0xb8050010: 0x11110000
- <6>[ 7.370000] eth0: link up (1000Mbps/Full duplex)
- <6>[ 7.480000] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
- <6>[ 7.490000] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
- <6>[ 8.130000] ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
- <7>[ 8.140000] ath: EEPROM regdomain: 0x0
- <7>[ 8.140000] ath: EEPROM indicates default country code should be used
- <7>[ 8.140000] ath: doing EEPROM country->regdmn map search
- <7>[ 8.140000] ath: country maps to regdmn code: 0x3a
- <7>[ 8.140000] ath: Country alpha2 being used: US
- <7>[ 8.140000] ath: Regpair used: 0x3a
- <7>[ 8.170000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- <3>[ 8.170000] gpiochip_find_base: cannot find free range
- <3>[ 8.170000] gpiochip_add: gpios -1..8 (ath9k-phy0) failed to register
- <6>[ 8.180000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=48
- <4>[ 8.210000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
- <6>[ 8.220000] ath: phy1: Ignoring endianness difference in EEPROM magic bytes.
- <7>[ 8.230000] ath: EEPROM regdomain: 0x0
- <7>[ 8.230000] ath: EEPROM indicates default country code should be used
- <7>[ 8.230000] ath: doing EEPROM country->regdmn map search
- <7>[ 8.230000] ath: country maps to regdmn code: 0x3a
- <7>[ 8.230000] ath: Country alpha2 being used: US
- <7>[ 8.230000] ath: Regpair used: 0x3a
- <7>[ 8.280000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- <3>[ 8.280000] gpiochip_find_base: cannot find free range
- <3>[ 8.290000] gpiochip_add: gpios -1..8 (ath9k-phy1) failed to register
- <6>[ 8.300000] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=49
- <6>[ 9.930000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- <6>[ 10.260000] device br0 entered promiscuous mode
- <6>[ 10.270000] using kernel STP
- <6>[ 10.290000] eth0: link down
- <7>[ 10.310000] ar71xx: pll_reg 0xb8050010: 0x11110000
- <6>[ 10.310000] eth0: link up (1000Mbps/Full duplex)
- <6>[ 10.330000] eth0: link down
- <7>[ 10.340000] ar71xx: pll_reg 0xb8050010: 0x11110000
- <6>[ 10.340000] eth0: link up (1000Mbps/Full duplex)
- <6>[ 10.350000] device eth0 entered promiscuous mode
- <6>[ 10.410000] device eth1 entered promiscuous mode
- <6>[ 10.430000] br0: port 1(eth0) entered listening state
- <6>[ 10.430000] br0: port 1(eth0) entered listening state
- <6>[ 10.440000] device br0 left promiscuous mode
- <6>[ 10.450000] device br0 entered promiscuous mode
- <6>[ 10.460000] device br0 left promiscuous mode
- <7>[ 10.570000] ath: EEPROM regdomain: 0x82f0
- <7>[ 10.570000] ath: EEPROM indicates we should expect a country code
- <7>[ 10.570000] ath: doing EEPROM country->regdmn map search
- <7>[ 10.570000] ath: country maps to regdmn code: 0x37
- <7>[ 10.570000] ath: Country alpha2 being used: SE
- <7>[ 10.570000] ath: Regpair used: 0x37
- <7>[ 10.570000] ath: regdomain 0x82f0 dynamically updated by user
- <7>[ 10.570000] ath: EEPROM regdomain: 0x82f0
- <7>[ 10.570000] ath: EEPROM indicates we should expect a country code
- <7>[ 10.570000] ath: doing EEPROM country->regdmn map search
- <7>[ 10.570000] ath: country maps to regdmn code: 0x37
- <7>[ 10.570000] ath: Country alpha2 being used: SE
- <7>[ 10.570000] ath: Regpair used: 0x37
- <7>[ 10.570000] ath: regdomain 0x82f0 dynamically updated by user
- <6>[ 11.420000] device ath1 entered promiscuous mode
- <1>[ 12.410000] fast-classifier (PBR safe v2.1.6b): starting up
- <1>[ 12.410000] fast-classifier: registered
- <6>[ 13.330000] ath1: authenticate with 78:32:1b:6c:44:a9
- <6>[ 13.350000] ath1: send auth to 78:32:1b:6c:44:a9 (try 1/3)
- <6>[ 13.350000] ath1: authenticated
- <6>[ 13.380000] ath1: associate with 78:32:1b:6c:44:a9 (try 1/3)
- <6>[ 13.380000] ath1: RX AssocResp from 78:32:1b:6c:44:a9 (capab=0x11 status=0 aid=2)
- <6>[ 13.390000] ath1: associated
- <6>[ 13.430000] br0: port 3(ath1) entered listening state
- <6>[ 13.440000] br0: port 3(ath1) entered listening state
- <6>[ 25.440000] br0: port 1(eth0) entered learning state
- <6>[ 28.480000] br0: port 3(ath1) entered learning state
- <6>[ 40.480000] br0: topology change detected, propagating
- <6>[ 40.480000] br0: port 1(eth0) entered forwarding state
- <6>[ 43.520000] br0: topology change detected, propagating
- <6>[ 43.520000] br0: port 3(ath1) entered forwarding state
Add Comment
Please, Sign In to add comment