Advertisement
Guest User

iw phy wac510

a guest
Dec 23rd, 2020
48
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.92 KB | None | 0 0
  1. Wiphy phy1
  2. wiphy index: 1
  3. max # scan SSIDs: 16
  4. max scan IEs length: 199 bytes
  5. max # sched scan SSIDs: 0
  6. max # match sets: 0
  7. max # scan plans: 1
  8. max scan plan interval: -1
  9. max scan plan iterations: 0
  10. Retry short limit: 7
  11. Retry long limit: 4
  12. Coverage class: 0 (up to 0m)
  13. Device supports AP-side u-APSD.
  14. Available Antennas: TX 0x3 RX 0x3
  15. Configured Antennas: TX 0x3 RX 0x3
  16. Supported interface modes:
  17. * IBSS
  18. * managed
  19. * AP
  20. * AP/VLAN
  21. * monitor
  22. * mesh point
  23. * P2P-client
  24. * P2P-GO
  25. * P2P-device
  26. Band 2:
  27. Capabilities: 0x19ef
  28. RX LDPC
  29. HT20/HT40
  30. SM Power Save disabled
  31. RX HT20 SGI
  32. RX HT40 SGI
  33. TX STBC
  34. RX STBC 1-stream
  35. Max AMSDU length: 7935 bytes
  36. DSSS/CCK HT40
  37. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  38. Minimum RX AMPDU time spacing: 8 usec (0x06)
  39. HT TX/RX MCS rate indexes supported: 0-15
  40. VHT Capabilities (0x339959b2):
  41. Max MPDU length: 11454
  42. Supported Channel Width: neither 160 nor 80+80
  43. RX LDPC
  44. short GI (80 MHz)
  45. TX STBC
  46. SU Beamformer
  47. SU Beamformee
  48. MU Beamformer
  49. MU Beamformee
  50. RX antenna pattern consistency
  51. TX antenna pattern consistency
  52. VHT RX MCS set:
  53. 1 streams: MCS 0-9
  54. 2 streams: MCS 0-9
  55. 3 streams: not supported
  56. 4 streams: not supported
  57. 5 streams: not supported
  58. 6 streams: not supported
  59. 7 streams: not supported
  60. 8 streams: not supported
  61. VHT RX highest supported: 0 Mbps
  62. VHT TX MCS set:
  63. 1 streams: MCS 0-9
  64. 2 streams: MCS 0-9
  65. 3 streams: not supported
  66. 4 streams: not supported
  67. 5 streams: not supported
  68. 6 streams: not supported
  69. 7 streams: not supported
  70. 8 streams: not supported
  71. VHT TX highest supported: 0 Mbps
  72. Frequencies:
  73. * 5180 MHz [36] (23.0 dBm)
  74. * 5200 MHz [40] (23.0 dBm)
  75. * 5220 MHz [44] (23.0 dBm)
  76. * 5240 MHz [48] (23.0 dBm)
  77. * 5260 MHz [52] (20.0 dBm) (radar detection)
  78. * 5280 MHz [56] (20.0 dBm) (radar detection)
  79. * 5300 MHz [60] (20.0 dBm) (radar detection)
  80. * 5320 MHz [64] (20.0 dBm) (radar detection)
  81. * 5500 MHz [100] (26.0 dBm) (radar detection)
  82. * 5520 MHz [104] (26.0 dBm) (radar detection)
  83. * 5540 MHz [108] (26.0 dBm) (radar detection)
  84. * 5560 MHz [112] (26.0 dBm) (radar detection)
  85. * 5580 MHz [116] (26.0 dBm) (radar detection)
  86. * 5600 MHz [120] (26.0 dBm) (radar detection)
  87. * 5620 MHz [124] (26.0 dBm) (radar detection)
  88. * 5640 MHz [128] (26.0 dBm) (radar detection)
  89. * 5660 MHz [132] (26.0 dBm) (radar detection)
  90. * 5680 MHz [136] (26.0 dBm) (radar detection)
  91. * 5700 MHz [140] (26.0 dBm) (radar detection)
  92. * 5720 MHz [144] (disabled)
  93. * 5745 MHz [149] (13.0 dBm)
  94. * 5765 MHz [153] (13.0 dBm)
  95. * 5785 MHz [157] (13.0 dBm)
  96. * 5805 MHz [161] (13.0 dBm)
  97. * 5825 MHz [165] (13.0 dBm)
  98. * 5845 MHz [169] (13.0 dBm)
  99. * 5865 MHz [173] (13.0 dBm)
  100. valid interface combinations:
  101. * #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1,
  102. total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
  103.  
  104. HT Capability overrides:
  105. * MCS: ff ff ff ff ff ff ff ff ff ff
  106. * maximum A-MSDU length
  107. * supported channel width
  108. * short GI for 40 MHz
  109. * max A-MPDU length exponent
  110. * min MPDU start spacing
  111. Maximum associated stations in AP mode: 32
  112. Supported extended features:
  113. * [ VHT_IBSS ]: VHT-IBSS
  114. * [ RRM ]: RRM
  115. * [ SET_SCAN_DWELL ]: scan dwell setting
  116. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  117. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  118. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  119. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  120. * [ AQL ]: Airtime Queue Limits (AQL)
  121. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  122. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  123. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  124. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
  125. Wiphy phy0
  126. wiphy index: 0
  127. max # scan SSIDs: 16
  128. max scan IEs length: 195 bytes
  129. max # sched scan SSIDs: 0
  130. max # match sets: 0
  131. max # scan plans: 1
  132. max scan plan interval: -1
  133. max scan plan iterations: 0
  134. Retry short limit: 7
  135. Retry long limit: 4
  136. Coverage class: 0 (up to 0m)
  137. Device supports AP-side u-APSD.
  138. Available Antennas: TX 0x3 RX 0x3
  139. Configured Antennas: TX 0x3 RX 0x3
  140. Supported interface modes:
  141. * IBSS
  142. * managed
  143. * AP
  144. * AP/VLAN
  145. * monitor
  146. * mesh point
  147. * P2P-client
  148. * P2P-GO
  149. * P2P-device
  150. Band 1:
  151. Capabilities: 0x19ef
  152. RX LDPC
  153. HT20/HT40
  154. SM Power Save disabled
  155. RX HT20 SGI
  156. RX HT40 SGI
  157. TX STBC
  158. RX STBC 1-stream
  159. Max AMSDU length: 7935 bytes
  160. DSSS/CCK HT40
  161. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  162. Minimum RX AMPDU time spacing: 8 usec (0x06)
  163. HT TX/RX MCS rate indexes supported: 0-15
  164. VHT Capabilities (0x339959b2):
  165. Max MPDU length: 11454
  166. Supported Channel Width: neither 160 nor 80+80
  167. RX LDPC
  168. short GI (80 MHz)
  169. TX STBC
  170. SU Beamformer
  171. SU Beamformee
  172. MU Beamformer
  173. MU Beamformee
  174. RX antenna pattern consistency
  175. TX antenna pattern consistency
  176. VHT RX MCS set:
  177. 1 streams: MCS 0-9
  178. 2 streams: MCS 0-9
  179. 3 streams: not supported
  180. 4 streams: not supported
  181. 5 streams: not supported
  182. 6 streams: not supported
  183. 7 streams: not supported
  184. 8 streams: not supported
  185. VHT RX highest supported: 0 Mbps
  186. VHT TX MCS set:
  187. 1 streams: MCS 0-9
  188. 2 streams: MCS 0-9
  189. 3 streams: not supported
  190. 4 streams: not supported
  191. 5 streams: not supported
  192. 6 streams: not supported
  193. 7 streams: not supported
  194. 8 streams: not supported
  195. VHT TX highest supported: 0 Mbps
  196. Frequencies:
  197. * 2412 MHz [1] (20.0 dBm)
  198. * 2417 MHz [2] (20.0 dBm)
  199. * 2422 MHz [3] (20.0 dBm)
  200. * 2427 MHz [4] (20.0 dBm)
  201. * 2432 MHz [5] (20.0 dBm)
  202. * 2437 MHz [6] (20.0 dBm)
  203. * 2442 MHz [7] (20.0 dBm)
  204. * 2447 MHz [8] (20.0 dBm)
  205. * 2452 MHz [9] (20.0 dBm)
  206. * 2457 MHz [10] (20.0 dBm)
  207. * 2462 MHz [11] (20.0 dBm)
  208. * 2467 MHz [12] (20.0 dBm)
  209. * 2472 MHz [13] (20.0 dBm)
  210. * 2484 MHz [14] (disabled)
  211. valid interface combinations:
  212. * #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1,
  213. total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
  214.  
  215. HT Capability overrides:
  216. * MCS: ff ff ff ff ff ff ff ff ff ff
  217. * maximum A-MSDU length
  218. * supported channel width
  219. * short GI for 40 MHz
  220. * max A-MPDU length exponent
  221. * min MPDU start spacing
  222. Maximum associated stations in AP mode: 32
  223. Supported extended features:
  224. * [ VHT_IBSS ]: VHT-IBSS
  225. * [ RRM ]: RRM
  226. * [ SET_SCAN_DWELL ]: scan dwell setting
  227. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  228. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  229. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  230. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  231. * [ AQL ]: Airtime Queue Limits (AQL)
  232. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  233. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  234. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  235. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement