Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Marvell>> printenv
- CASset=max
- MALLOC_len=5
- MPmode=SMP
- autoload=no
- baudrate=115200
- boot_a_script=for prefix in /boot/ /; do load ${boot_interface} 0:1 ${script_addr_r} ${prefix}boot.scr && source ${script_addr_r}; done
- boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
- bootargs_dflt=$console $nandEcc $mtdparts_lgcy $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
- bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
- bootargs_root=root=/dev/nfs rw
- bootcmd=echo Trying to boot from MMC; run mmcboot;echo Trying to boot from USB; run usbboot;echo Default boot sequence failed - falling back to TFTP;tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
- bootcmd_auto=stage_boot $boot_order
- bootcmd_lgcy=tftpboot 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts_lgcy $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootm $loadaddr;
- bootdelay=3
- cacheShare=no
- console=console=ttyS0,115200
- device_partition=0:1
- disaMvPnp=no
- eeeEnable=no
- enaClockGating=no
- enaCpuStream=no
- enaFPU=yes
- enaMonExt=no
- enaWrAllo=no
- eth1addr=00:50:43:f6:3f:07
- eth1mtu=1500
- eth2addr=00:50:43:f6:00:07
- eth2mtu=1500
- eth3addr=00:50:43:3f:00:f6
- eth3mtu=1500
- ethact=egiga0
- ethaddr=00:50:43:00:3f:07
- ethmtu=1500
- ethprime=egiga0
- fdt_addr=2040000
- fdt_skip_update=yes
- fdtfile=armada-388-helios4.dtb
- ide_path=/
- image_name=uImage
- initrd_name=uInitrd
- ipaddr=10.4.50.170
- kernel_addr_r=2080000
- lcd0_enable=0
- lcd0_params=640x480-16@60
- lcd_panel=0
- limit_dram_size=yes
- loadaddr=0x02000000
- loads_echo=0
- mmcboot=setenv boot_interface mmc; run boot_a_script;
- mtdids=spi0=spi_flash
- mtdparts=mtdparts=spi0.0:4m(boot),-(spi-rootfs)
- mtdparts_lgcy=mtdparts=spi_flash:4m(boot),-(spi-rootfs)
- mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
- mv_pon_addr=00:50:43:07:00:f6
- netbsd_en=no
- netmask=255.255.255.0
- netretry=no
- pcieTune=no
- pexMode=RC
- pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
- pxefile_addr_r=3100000
- ramdisk_addr_r=2880000
- rootpath=/srv/nfs/
- run_script=no
- sata_delay_reset=0
- sata_dma_mode=yes
- sataboot=scsi init; setenv boot_interface scsi; run boot_a_script;
- script_addr_r=3000000
- script_name=boot.scr
- sd_detection_dat3=no
- serverip=10.4.50.38
- standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts_lgcy root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
- stderr=serial
- stdin=serial
- stdout=serial
- usb0Mode=host
- usbActive=1
- usbType=3
- usbboot=setenv usbActive 1; setenv usbType 3; usb start; setenv boot_interface usb; run boot_a_script;
- vxworks_en=no
- yuk_ethaddr=00:00:00:EE:51:81
- Environment size: 3228/8188 bytes
Advertisement
Add Comment
Please, Sign In to add comment
