info:
  prefix: '&8(&4&lFAWE&8)&r&7'
  schematic_pasting: &7The schematic is pasting. This cannot be undone.
  lighting_propogate_selection: &7Lighting has been propogated in %s0 chunks. To remove light use //removelight
  updated_lighting_selection: &7Lighting has been updated in %s0 chunks. (It may
    take a second for the packets to send)
  set_region: &7Selection set to your current WorldEdit region
  worldedit_command_limit: &7Please wait until your current action completes
  worldedit_delayed: &7Please wait while we process your WorldEdit action...
  worldedit_run: &7Apologies for the delay. Now executing %s
  worldedit_complete: &7WorldEdit action completed.
  require_selection_in_mask: '&7%s of your selection is not within your mask. You
    can only make edits within allowed regions.'
  worldedit_volume: &7You cannot select a volume of %current%. The maximum volume
    you can modify is %max%.
  worldedit_iterations: &7You cannot iterate %current% times. The maximum number
    of iterations allowed is %max%.
  worldedit_unsafe: &7Access to that command has been blocked
  worldedit_dangerous_worldedit: &cFAWE processed unsafe WorldEdit at %s0 by %s1
  worldedit_bypassed: &7Currently bypassing WorldEdit restriction.
  worldedit_unmasked: &6Your WorldEdit is now unrestricted.
  worldedit_restricted: &6Your WorldEdit is now restricted.
  worldedit_oom_admin: |-
    &cPossible options:
    &8 - &7//fast
    &8 - &7Do smaller edits
    &8 - &7Allocate more memory
    &8 - &7Disable this safeguard
  compressed: History compressed. Saved ~ %s0b (%s1x smaller)
  action_complete: Action completed in %s0 seconds
  file_deleted: %s0 has been deleted.
  worldedit_toggle_tips_on: &7Disabled FAWE tips.
  worldedit_toggle_tips_off: &7Enabled FAWE tips.
error:
  worldedit_extend: &cYour WorldEdit may have extended outside your allowed region.
  command_syntax: &cUsage: &7%s0
  no_perm: &cYou are lacking the permission node: %s0
  setting_disable: &cLacking setting: %s0
  schematic_not_found: &cSchematic not found: &7%s0
  no_region: &cYou have no current WorldEdit region
  no_mask: &cYou have no current mask set
  not_player: &cYou must be a player to perform this action!
  player_not_found: &cPlayer not found:&7 %s0
  oom: |-
    &8[&cCritical&8] &cDetected low memory i.e. < 1%. FAWE will take the following actions:
    &8 - &7Terminate WE block placement
    &8 - &7Clear WE history
    &8 - &7Unload non essential chunks
    &8 - &7Kill entities
    &8 - &7Garbage collect
    &cIgnore this if trying to crash server.
    &7Note: Low memory is likely (but not necessarily) caused by WE
  worldedit_some_fails: &c%s0 blocks werent placed because they were outside your
    allowed region.
  worldedit_some_fails_blockbag: &cMissing blocks: %s0
  web_unauthorized: Only links from the configured web host is allowed: %s0
  brush_not_found: &cAvailable brushes: %s0
  brush_incompatible: &cBrush not compatible with this version
web:
  generating_link: Uploading %s, please wait...
  generating_link_failed: &cFailed to generate download link!
  download_link: %s
worldedit:
  general:
    mask_disabled: Global mask disabled
    mask: Global mask set
    transform_disabled: Global transform disabled
    transform: Global transform set
    texture_disabled: Texturing reset
    texture_set: Set texturing to %s1
    source_mask_disabled: Global source mask disabled
    source_mask: Global source mask set
    fast_enabled: Fast mode enabled. History and edit restrictions will be bypassed.
    fast_disabled: Fast mode disabled
    place_enabled: Now placing at pos #1.
    place_disabled: Now placing at the block you stand in.
  copy:
    command_copy: %s0 blocks were copied (Note: lazycopy is faster)
  cut:
    command_cut_slow: %s0 blocks were cut.
    command_cut_lazy: %s0 blocks will be removed on paste
  paste:
    command_paste: The clipboard has been pasted at %s0
  rotate:
    command_rotate: The clipboard has been rotated
  flip:
    command_flipped: The clipboard has been flipped
  regen:
    command_regen_0: Region regenerated.
    command_regen_1: Region regenerated.
    command_regen_2: Region regenerated.
  tree:
    command_tree: %s0 trees created.
    command_pumpkin: %s0 pumpkin patches created.
  flora:
    command_flora: %s0 flora created.
  history:
    command_history_clear: History cleared
    command_redo_success: Redo successful.
    command_undo_success: Undo successful.
    command_redo_error: Nothing left to redo. (See also `/inspect` and `/frb`)
    command_history_other_error: Unable to find session for %s0.
    command_undo_error: Nothing left to undo. (See also `/inspect` and `/frb`)
  operation:
    operation: Operation queued (%s0)
  selection:
    selection_wand: Left click: select pos #1; Right click: select pos #2
    selection_wand_disable: Edit wand disabled.
    selection_wand_enable: Edit wand enabled.
    selection_chunk: Chunk selected (%s0)
    selection_chunks: Chunks selected (%s0) - (%s1)
    selection_contract: Region contracted %s0 blocks.
    selection_count: Counted %s0 blocks.
    selection_distr: # total blocks: %s0
    selection_expand: Region expanded %s0 blocks
    selection_expand_vert: Region expanded %s0 blocks (top to bottom)
    selection_inset: Region inset
    selection_outset: Region outset
    selection_shift: Region shifted
    selection_cleared: Selection cleared
  brush:
    brush_copy: Copy brush equipped (%s0)
    brush_height_invalid: Invalid height map file (%s0)
    brush_smooth: Smooth brush equipped (%s0 x %s1 using %s2).
    brush_spline: Line brush shape equipped (%s0). Right click an end to add a shape
    brush_spline_secondary_error: Not enough positions set!
    brush_spline_secondary: Created spline
    brush_size: Brush size set
    brush_range: Brush size set
    brush_mask_disabled: Brush mask disabled
    brush_mask: Brush mask set
    brush_transform_disabled: Brush transform disabled
    brush_transform: Brush transform set
    brush_material: Brush material set
    brush_reset: Reset your brush. (SHIFT + Click)
    brush_none: You arent holding a brush!
    brush_scroll_action_set: Set scroll action to %s0
    brush_scroll_action_unset: Removed scroll action
    brush_visual_mode_set: Set visual mode to %s0
    brush_target_mode_set: Set target mode to %s0
    brush_target_mask_set: Set target mask to %s0
    brush_target_offset_set: Set target offset to %s0
    brush_equipped: Equipped brush %s0
    brush_try_other: |-
      &cThere are other more suitable brushes e.g.
      &8 - &7//br height [radius=5] [#clipboard|file=null] [rotation=0] [yscale=1.00]
    brush_line_primary: Added point %s0, click another position to create the line
    brush_catenary_direction: Added point %s0, click the direction you want to create
      the spline
    brush_line_secondary: Created spline
    brush_spline_primary_2: Added position, Click the same spot to join!
    brush_source_mask_disabled: Brush source mask disabled
    brush_source_mask: Brush source mask set
  rollback:
    rollback_element: Undoing %s0
  tool:
    tool_inspect: Inspect tool bound to %s0.
    tool_inspect_info: &7%s0 changed %s1 to %s2 %s3 ago
    tool_inspect_info_footer: &6Total: &7%s0 changes
    tool_none: Tool unbound from your current item.
    tool_info: Info tool bound to %s0.
    tool_tree: Tree tool bound to %s0.
    tool_tree_error: Tree type %s0 is unknown.
    tool_repl: Block replacer tool bound to %s0.
    tool_cycler: Block data cycler tool bound to %s0.
    tool_flood_fill: Block flood fill tool bound to %s0.
    tool_deltree: Floating tree remover tool bound to %s0.
    tool_farwand: Far wand tool bound to %s0.
    tool_lrbuild_bound: Long-range building tool bound to %s0.
    tool_lrbuild_info: Left-click set to %s0; right-click set to %s1.
    superpickaxe_enabled: Super Pickaxe enabled.
    superpickaxe_disabled: Super Pickaxe disabled.
    tool_range_error: Maximum range: %s0.
    tool_radius_error: Maximum allowed brush radius: %s0.
    superpickaxe_area_enabled: Mode changed. Left click with a pickaxe. // to disable.
  schematic:
    schematic_format: Available clipboard formats (Name: Lookup names)
    schematic_loaded: %s0 loaded. Paste it with //paste
    schematic_saved: %s0 saved.
    schematic_page: Page must be %s
    schematic_none: No schematics found.
    schematic_list: Available schematics (Filename: Format) [%s0/%s1]:
    schematic_prompt_clear: &7You may want to use &c%s0 &7to clear your current clipboard
      first
    schematic_show: |-
      &7Displaying &a%s0&7 schematics from &a%s1&7:
      &8 - &aLeft click &7a structure to set your clipboard
      &8 - &aRight click &7to add a structure to your multi-clipboard
      &8 - &7Use &a%s2&7 to go back to the world
    schematic_move_exists: &c%s0 already exists
    schematic_move_success: &a%s0 -> %s1
    schematic_move_failed: &a%s0 no moved: %s1
    schematic_list_elem: &8 - &a%s0 &8- &7%s1
  clipboard:
    clipboard_cleared: Clipboard cleared
    clipboard_uri_not_found: You do not have %s0 loaded
    clipboard_invalid_format: Unknown clipboard format:  %s0
  visitor:
    visitor_block: %s0 blocks affected
    visitor_entity: %s0 entities affected
    visitor_flat: %s0 columns affected
  selector:
    selector_invalid_coordinates: Invalid coordinates %s0
    selector_already_set: Position already set.
    selector_fuzzy_pos1: Region set and expanded from %s0 %s1.
    selector_fuzzy_pos2: Added expansion of %s0 %s1.
    selector_pos: pos%s0 set to %s1 (%s2).
    selector_center: Center set to %s0 (%s1).
    selector_radius: Radius set to %s0 (%s1).
    selector_expanded: Expanded region to %s0 (%s1)
    selector_set_default: Your default region selector is now %s0.
  command:
    command_invalid_syntax: The command was not used properly (no more help available).
  navigation:
    navigation_wand_error: &cNothing to pass through
  anvil:
    world_is_loaded: The world shouldnt be in use when executing. Unload the world,
      or use use -f to override (save first)
  snapshot:
    snapshot_loaded: Snapshot %s0 loaded; now restoring...
    snapshot_set: Snapshot set to: %s0
    snapshot_newest: Now using newest snapshot.
    snapshot_list_header: Snapshots for world (%s0):
    snapshot_list_footer: Use /snap use [snapshot] or /snap use latest.
  biome:
    biome_list_header: Biomes (page %s0/%s1):
    biome_changed: Biomes were changed in %s0 columns.
  utility:
    kill_success: Killed %s0 entities in a radius of %s1.
    nothing_confirmed: You have no actions pending confirmation.
    page_footer: Use %s0 to go to the next page
  timezone:
    timezone_set: Timezone set for this session to: %s0
    timezone_display: The current time in that timezone is:  %s0
  help:
    command_clarifying_bracket: &7Added clarifying bracket for &c%s0
    help_suggest: &7Couldnt find %s0. Maybe try one of &c%s1 &7?
    help_header_categories: Command Types
    help_header_subcommands: Subcommands
    help_header_command: &cHelp for: &7%s0
    help_item_allowed: &a%s0&8 - &7%s1
    help_item_denied: &c%s0&8 - &7%s1
    help_header: Help: page %s0/%s1
    help_footer: &7Wiki: https://git.io/vSKE5
progress:
  progress_message: [ Queue: %s0 | Dispatched: %s1 ]
  progress_finished: [ Done! ]
cancel:
  worldedit_cancel_count: &cCancelled %s0 edits.
  worldedit_cancel_reason: &cYour WorldEdit action was cancelled:&7 %s0&c.
  worldedit_cancel_reason_manual: Manual cancellation
  worldedit_cancel_reason_low_memory: Low memory
  worldedit_cancel_reason_max_changes: Too many blocks changed
  worldedit_cancel_reason_max_checks: Too many block checks
  worldedit_cancel_reason_max_tiles: Too many blockstates
  worldedit_cancel_reason_max_entities: Too many entities
  worldedit_cancel_reason_max_iterations: Max iterations
  worldedit_cancel_reason_no_region: No allowed region (bypass with /wea, or disable
    `region-restrictions` in config.yml)
  worldedit_failed_load_chunk: &cSkipped loading chunk: &7%s0;%s1&c. Try increasing
    chunk-wait.
  worldedit_cancel_reason_confirm: &7Your selection is large (&c%s0 &7-> &c%s1&7,
    containing &c%s3&7 blocks). Use &c//confirm &7to execute &c%s2
  worldedit_cancel_reason_outside_level: Outside world
  worldedit_cancel_reason_outside_region: Outside allowed region (bypass with /wea,
    or disable `region-restrictions` in config.yml)
history: {}
navigation:
  ascend_fail: No free spot above you found.
  ascended_plural: Ascended %s0 levels.
  ascended_singular: Ascended a level.
  unstuck: There you go!
  descend_fail: No free spot below you found.
  descend_plural: Descended %s0 levels.
  descend_singular: Descended a level.
  whoosh: Whoosh!
  poof: Poof!
  thru_fail: No free spot ahead of you found.
  up_fail: You would hit something above you.
  no_block: No block in sight! (or too far)
selection:
  sel_cuboid: Cuboid: left click for point 1, right click for point 2
  sel_cuboid_extend: Cuboid: left click for a starting point, right click to extend
  sel_2d_polygon: 2D polygon selector: Left/right click to add a point.
  sel_ellipsiod: Ellipsoid selector: left click=center, right click to extend
  sel_sphere: Sphere selector: left click=center, right click to set radius
  sel_cylindrical: Cylindrical selector: Left click=center, right click to extend.
  sel_max: %s0 points maximum.
  sel_fuzzy: Fuzzy selector: Left click to select all contingent blocks, right click
    to add. To select an air cavity, use //pos1.
  sel_convex_polyhedral: Convex polyhedral selector: Left click=First vertex, right
    click to add more.
  sel_list: For a list of selection types use:&c //sel list
  sel_modes: Select one of the modes below:
tips:
  tip_sel_list: Tip: See the different selection modes with &c//sel list
  tip_select_connected: Tip: Select all connected blocks with //sel fuzzy
  tip_set_pos1: Tip: Use pos1 as a pattern with &c//set pos1
  tip_farwand: Tip: Select distant points with &c//farwand
  tip_lazycut: &7Tip: It is safer to use &c//lazycut
  tip_fast: &7Tip: Set fast and without undo using &c//fast
  tip_cancel: &7Tip: You can &c//cancel &7an edit in progress
  tip_mask: &7Tip: Set a global destination mask with &c/gmask
  tip_mask_angle: Tip: Replace upward slopes of 3-20 blocks using&c //replace /[-20][-3]
    bedrock
  tip_set_linear: &7Tip: Set blocks linearly with&c //set #l3d[wood,bedrock]
  tip_surface_spread: &7Tip: Spread a flat surface with&c //set #surfacespread[5][0][5][#existing]
  tip_set_hand: &7Tip: Use your current hand with &c//set hand
  tip_replace_id: &7Tip: Replace only the block id:&c //replace woodenstair #id[cobblestair]
  tip_replace_light: Tip: Remove light sources with&c //replace #brightness[1][15]
    0
  tip_tab_complete: Tip: The replace command supports tab completion
  tip_flip: Tip: Mirror with &c//flip
  tip_deform: Tip: Reshape with &c//deform
  tip_transform: Tip: Set a transform with &c//gtransform
  tip_copypaste: Tip: Paste on click with &c//br copypaste
  tip_source_mask: Tip: Set a source mask with &c/gsmask <mask>&7
  tip_replace_marker: Tip: Replace a block with your full clipboard using &c//replace
    wool #fullcopy
  tip_paste: Tip: Place with &c//paste
  tip_lazycopy: Tip: lazycopy is faster
  tip_download: Tip: Try out &c//download
  tip_rotate: Tip: Orientate with &c//rotate
  tip_copy_pattern: Tip: To use as a pattern try &c#copy
  tip_regen_0: Tip: Use a biome with /regen [biome]
  tip_regen_1: Tip: Use a seed with /regen [biome] [seed]
  tip_biome_pattern: Tip: The &c#biome[forest]&7 pattern can be used in any command
  tip_biome_mask: Tip: Restrict to a biome with the `$jungle` mask