API tools faq
paste
Guest User

Untitled

a guest
Jan 9th, 2022
33
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.88 KB | None | 0 0
raw download clone embed print report
  1. DDR Version V1.09 20210630
  2. ln
  3. ddrconfig:7
  4. LPDDR4X, 324MHz
  5. BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
  6. tdqss: cs0 dqs0: -72ps, dqs1: -144ps, dqs2: -96ps, dqs3: -217ps,
  7. tdqss: cs1 dqs0: -72ps, dqs1: -144ps, dqs2: -96ps, dqs3: -217ps,
  8.  
  9. change to: 324MHz
  10. PHY drv:clk:36,ca:36,DQ:29,odt:60
  11. vrefinner:16%, vrefout:41%
  12. dram drv:40,odt:0
  13. clk skew:0x65
  14.  
  15. change to: 528MHz
  16. PHY drv:clk:36,ca:36,DQ:29,odt:60
  17. vrefinner:16%, vrefout:41%
  18. dram drv:40,odt:0
  19. clk skew:0x58
  20.  
  21. change to: 780MHz
  22. PHY drv:clk:36,ca:36,DQ:29,odt:60
  23. vrefinner:16%, vrefout:41%
  24. dram drv:40,odt:0
  25. clk skew:0x58
  26.  
  27. change to: 1056MHz(final freq)
  28. PHY drv:clk:36,ca:36,DQ:29,odt:60
  29. vrefinner:16%, vrefout:22%
  30. dram drv:40,odt:80
  31. vref_ca:00000071
  32. clk skew:0x46
  33. cs 0:
  34. the read training result:
  35. DQS0:0x3e, DQS1:0x3c, DQS2:0x44, DQS3:0x3b,
  36. min : 0xf 0x11 0x11 0xe 0x1 0x3 0x6 0x2 , 0xa 0x8 0x3 0x2 0x9 0x7 0x9 0x4 ,
  37. 0x13 0x12 0xe 0xc 0x4 0x1 0x3 0x3 , 0xa 0x7 0x6 0x1 0x9 0x8 0x7 0x8 ,
  38. mid :0x2d 0x2f 0x2f 0x2b 0x20 0x21 0x24 0x20 ,0x27 0x27 0x20 0x20 0x27 0x26 0x26 0x23 ,
  39. 0x32 0x32 0x2d 0x2b 0x24 0x21 0x22 0x22 ,0x2a 0x27 0x25 0x21 0x29 0x29 0x26 0x28 ,
  40. max :0x4c 0x4d 0x4d 0x48 0x40 0x3f 0x43 0x3f ,0x45 0x46 0x3e 0x3f 0x45 0x45 0x43 0x42 ,
  41. 0x51 0x52 0x4c 0x4b 0x45 0x41 0x42 0x42 ,0x4a 0x47 0x45 0x41 0x4a 0x4a 0x46 0x48 ,
  42. range:0x3d 0x3c 0x3c 0x3a 0x3f 0x3c 0x3d 0x3d ,0x3b 0x3e 0x3b 0x3d 0x3c 0x3e 0x3a 0x3e ,
  43. 0x3e 0x40 0x3e 0x3f 0x41 0x40 0x3f 0x3f ,0x40 0x40 0x3f 0x40 0x41 0x42 0x3f 0x40 ,
  44. the write training result:
  45. DQS0:0x3d, DQS1:0x33, DQS2:0x3a, DQS3:0x29,
  46. min :0x5d 0x5f 0x62 0x62 0x53 0x54 0x57 0x56 0x56 ,0x52 0x51 0x4c 0x4d 0x52 0x51 0x52 0x53 0x4f ,
  47. 0x58 0x58 0x55 0x55 0x4d 0x4b 0x4b 0x50 0x50 ,0x4a 0x48 0x45 0x3f 0x4a 0x4a 0x47 0x4b 0x45 ,
  48. mid :0x79 0x7c 0x7e 0x7c 0x6e 0x70 0x72 0x71 0x71 ,0x6d 0x6c 0x66 0x67 0x6d 0x6a 0x6b 0x6b 0x69 ,
  49. 0x74 0x75 0x70 0x71 0x68 0x63 0x65 0x6a 0x6a ,0x65 0x62 0x5f 0x5b 0x66 0x65 0x60 0x66 0x5e ,
  50. max :0x96 0x99 0x9a 0x97 0x8a 0x8c 0x8e 0x8d 0x8d ,0x88 0x88 0x80 0x82 0x89 0x83 0x85 0x84 0x83 ,
  51. 0x91 0x92 0x8b 0x8d 0x83 0x7b 0x80 0x85 0x85 ,0x81 0x7c 0x79 0x78 0x82 0x81 0x7a 0x81 0x78 ,
  52. range:0x39 0x3a 0x38 0x35 0x37 0x38 0x37 0x37 0x37 ,0x36 0x37 0x34 0x35 0x37 0x32 0x33 0x31 0x34 ,
  53. 0x39 0x3a 0x36 0x38 0x36 0x30 0x35 0x35 0x35 ,0x37 0x34 0x34 0x39 0x38 0x37 0x33 0x36 0x33 ,
  54. cs 1:
  55. the read training result:
  56. DQS0:0x40, DQS1:0x3d, DQS2:0x44, DQS3:0x3a,
  57. min :0x10 0x11 0x12 0x10 0x2 0x5 0x8 0x3 , 0x9 0x7 0x2 0x1 0x8 0x7 0x9 0x4 ,
  58. 0x13 0x12 0xe 0xc 0x5 0x1 0x3 0x3 , 0xa 0x6 0x6 0x1 0x9 0x9 0x7 0x9 ,
  59. mid :0x2f 0x30 0x30 0x2d 0x21 0x23 0x27 0x22 ,0x27 0x26 0x20 0x20 0x27 0x26 0x27 0x24 ,
  60. 0x31 0x31 0x2c 0x2b 0x25 0x21 0x22 0x22 ,0x29 0x25 0x25 0x1f 0x28 0x28 0x26 0x28 ,
  61. max :0x4e 0x4f 0x4e 0x4b 0x41 0x42 0x46 0x42 ,0x46 0x46 0x3e 0x40 0x47 0x46 0x46 0x44 ,
  62. 0x4f 0x50 0x4a 0x4a 0x45 0x41 0x41 0x42 ,0x49 0x45 0x44 0x3e 0x48 0x48 0x45 0x47 ,
  63. range:0x3e 0x3e 0x3c 0x3b 0x3f 0x3d 0x3e 0x3f ,0x3d 0x3f 0x3c 0x3f 0x3f 0x3f 0x3d 0x40 ,
  64. 0x3c 0x3e 0x3c 0x3e 0x40 0x40 0x3e 0x3f ,0x3f 0x3f 0x3e 0x3d 0x3f 0x3f 0x3e 0x3e ,
  65. the write training result:
  66. DQS0:0x3d, DQS1:0x33, DQS2:0x3a, DQS3:0x29,
  67. min :0x5f 0x65 0x64 0x62 0x54 0x56 0x5a 0x58 0x57 ,0x54 0x54 0x4f 0x4f 0x56 0x54 0x55 0x54 0x51 ,
  68. 0x5c 0x5c 0x58 0x57 0x50 0x4f 0x4e 0x54 0x54 ,0x4d 0x4b 0x47 0x45 0x4d 0x4d 0x4a 0x4e 0x48 ,
  69. mid :0x7b 0x7f 0x7f 0x7e 0x70 0x71 0x75 0x72 0x72 ,0x6e 0x6e 0x68 0x69 0x70 0x6d 0x6d 0x6c 0x6a ,
  70. 0x77 0x77 0x72 0x72 0x6b 0x68 0x68 0x6d 0x6d ,0x68 0x66 0x61 0x5f 0x68 0x67 0x63 0x69 0x60 ,
  71. max :0x97 0x9a 0x9a 0x9a 0x8c 0x8d 0x90 0x8d 0x8d ,0x88 0x89 0x82 0x83 0x8b 0x87 0x85 0x85 0x84 ,
  72. 0x92 0x93 0x8c 0x8e 0x86 0x81 0x83 0x86 0x87 ,0x84 0x81 0x7b 0x7a 0x83 0x82 0x7c 0x84 0x79 ,
  73. range:0x38 0x35 0x36 0x38 0x38 0x37 0x36 0x35 0x36 ,0x34 0x35 0x33 0x34 0x35 0x33 0x30 0x31 0x33 ,
  74. 0x36 0x37 0x34 0x37 0x36 0x32 0x35 0x32 0x33 ,0x37 0x36 0x34 0x35 0x36 0x35 0x32 0x36 0x31 ,
  75. CA Training result:
  76. cs:0 min :0x52 0x47 0x4a 0x3b 0x49 0x3b 0x48 ,0x4f 0x42 0x48 0x39 0x48 0x39 0x48 ,
  77. cs:0 mid :0x8c 0x8d 0x82 0x80 0x82 0x7f 0x74 ,0x88 0x87 0x80 0x7e 0x80 0x7e 0x74 ,
  78. cs:0 max :0xc6 0xd3 0xbb 0xc6 0xbb 0xc4 0xa1 ,0xc1 0xcc 0xb9 0xc4 0xb9 0xc3 0xa1 ,
  79. cs:0 range:0x74 0x8c 0x71 0x8b 0x72 0x89 0x59 ,0x72 0x8a 0x71 0x8b 0x71 0x8a 0x59 ,
  80. cs:1 min :0x4f 0x4a 0x48 0x41 0x46 0x42 0x4a ,0x4c 0x47 0x46 0x3e 0x47 0x3e 0x48 ,
  81. cs:1 mid :0x8c 0x8d 0x83 0x82 0x82 0x82 0x76 ,0x88 0x87 0x81 0x7f 0x82 0x7f 0x75 ,
  82. cs:1 max :0xc9 0xd0 0xbf 0xc4 0xbe 0xc3 0xa3 ,0xc4 0xc8 0xbd 0xc0 0xbd 0xc0 0xa2 ,
  83. cs:1 range:0x7a 0x86 0x77 0x83 0x78 0x81 0x59 ,0x78 0x81 0x77 0x82 0x76 0x82 0x5a ,
  84. out
  85. U-Boot SPL board init
  86. U-Boot SPL 2017.09-ga1f6fc00a0-210413 #ldq (Apr 13 2021 - 11:35:00)
  87. unknown raw ID phN
  88. unrecognized JEDEC id bytes: 00, 00, 00
  89. Trying to boot from MMC2
  90. No misc partition
  91. Not fit magic
  92. Trying fit image at 0x5000 sector
  93. ## Verified-boot: 0
  94. ## Checking atf-1 0x00040000 ... sha256+ OK
  95. ## Checking uboot 0x00a00000 ... sha256+ OK
  96. ## Checking fdt 0x00b212c0 ... sha256+ OK
  97. ## Checking atf-2 0xfdcc9000 ... sha256+ OK
  98. ## Checking atf-3 0xfdcd0000 ... sha256+ OK
  99. ## Checking optee 0x08400000 ... sha256+ OK
  100. Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
  101. Total: 370.657 ms
  102.  
  103. INFO: Preloader serial: 2
  104. .NOTICE: BL31: v2.3():v2.3-135-gcda1658bc-dirty:xsf
  105. NOTICE: BL31: Built : 19:32:20, Jun 2 2021
  106. INFO: GICv3 without legacy support detected.
  107. INFO: ARM GICv3 driver initialized in EL3
  108. INFO: pmu v1 is valid
  109. INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
  110. INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
  111. INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
  112. INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
  113. INFO: Using opteed sec cpu_context!
  114. INFO: boot cpu mask: 0
  115. INFO: BL31: Initializing runtime services
  116. INFO: BL31: Initializing BL32
  117. I/TC:
  118. I/TC: Start rockchip platform init
  119. I/TC: Rockchip release version: 1.0
  120. I/TC: OP-TEE version: 3.6.0-307-g0b06ae94 #1 Fri May 7 01:52:27 UTC 2021 aarch64
  121. I/TC: Initialized
  122. INFO: BL31: Preparing for EL3 exit to normal world
  123. INFO: Entry point address = 0xa00000
  124. INFO: SPSR = 0x3c9
  125.  
  126.  
  127. U-Boot 2017.09 (Jun 26 2021 - 13:03:27 +0000)
  128.  
  129. Model: Pine64 RK3566 Quartz64 Board
  130. PreSerial: 2, raw, 0xfe660000
  131. DRAM: 4 GiB
  132. Sysmem: init
  133. Relocation Offset: ed39f000, fdt: eb9f9fb8
  134. no mmc device at slot 1
  135. dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0
  136. Bootdev(atags): mmc 1
  137. MMC1: Legacy, 50Mhz
  138. PartType: EFI
  139. No misc partition
  140. boot mode: None
  141. FIT: No boot partition
  142. No resource partition
  143. Failed to load DTB
  144. Failed to get kernel dtb, ret=-19
  145. io-domain: OK
  146. *** Warning - bad CRC, using default environment
  147.  
  148. Model: Pine64 RK3566 Quartz64 Board
  149. rockchip_set_serialno: could not find efuse/otp device
  150. CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  151. apll 816000 KHz
  152. dpll 528000 KHz
  153. gpll 1188000 KHz
  154. cpll 1000000 KHz
  155. npll 24000 KHz
  156. vpll 24000 KHz
  157. hpll 24000 KHz
  158. ppll 100000 KHz
  159. armclk 816000 KHz
  160. aclk_bus 150000 KHz
  161. pclk_bus 50000 KHz
  162. aclk_top_high 300000 KHz
  163. aclk_top_low 200000 KHz
  164. hclk_top 150000 KHz
  165. pclk_top 50000 KHz
  166. aclk_perimid 300000 KHz
  167. hclk_perimid 150000 KHz
  168. pclk_pmu 50000 KHz
  169. Net: clk_get_by_name(master_bus) failed: -22eqos_probe_resources() failed: -22No ethernet found.
  170. Hit key to stop autoboot('CTRL+C'): 0
  171. ## Booting FIT Image FIT: No boot partition
  172. FIT: No FIT image
  173. Could not find misc partition
  174. ANDROID: reboot reason: "(none)"
  175. optee api revision: 2.0
  176. TEEC: Waring: Could not find security partition
  177. Not AVB images, AVB skip
  178. android_image_load_by_partname: Can't find part: boot
  179. Android image load failed
  180. Android boot failed, error -1.
  181. switch to partitions #0, OK
  182. mmc1 is current device
  183. Scanning mmc 1:4...
  184. Found /extlinux/extlinux.conf
  185. Retrieving file: /extlinux/extlinux.conf
  186. reading /extlinux/extlinux.conf
  187. 372 bytes read in 4 ms (90.8 KiB/s)
  188. 1:.MiniMyth2
  189. Retrieving file: /Image
  190. reading /Image
  191. 31115776 bytes read in 2576 ms (11.5 MiB/s)
  192. append: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
  193. Retrieving file: /dtbs/rockchip/rk3566-x96_x6.dtb
  194. reading /dtbs/rockchip/rk3566-x96_x6.dtb
  195. 36646 bytes read in 12 ms (2.9 MiB/s)
  196. Fdt Ramdisk skip relocation
  197. ## Flattened Device Tree blob at 0x0a100000
  198. Booting using the fdt blob at 0x0a100000
  199. Using Device Tree in place at 000000000a100000, end 000000000a10bf25
  200. can't found rockchip,drm-logo, use rockchip,fb-logo
  201. WARNING: could not set reg FDT_ERR_BADOFFSET.
  202. failed to reserve fb-loader-logo memory
  203. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  204. Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
  205. Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
  206. Total: 3465.729 ms
  207.  
  208. Starting kernel ...
  209.  
  210. [ 0.000000] efi: UEFI not found.
  211. [ 0.000000] Zone ranges:
  212. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
  213. [ 0.000000] DMA32 empty
  214. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  215. [ 0.000000] Movable zone start for each node
  216. [ 0.000000] Early memory node ranges
  217. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
  218. [ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff]
  219. [ 0.000000] node 0: [mem 0x00000001f0000000-0x00000001ffffffff]
  220. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
  221. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  222. [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
  223. [ 0.000000] cma: Reserved 256 MiB at 0x00000000e0000000
  224. [ 0.000000] psci: probing for conduit method from DT.
  225. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  226. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  227. [ 0.000000] psci: Trusted OS migration not required
  228. [ 0.000000] psci: SMC Calling Convention v1.2
  229. [ 0.000000] percpu: Embedded 29 pages/cpu s79128 r8192 d31464 u118784
  230. [ 0.000000] pcpu-alloc: s79128 r8192 d31464 u118784 alloc=29*4096
  231. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  232. [ 0.000000] Detected VIPT I-cache on CPU0
  233. [ 0.000000] CPU features: detected: GIC system register CPU interface
  234. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  235. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  236. [ 0.000000] alternatives: patching kernel code
  237. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
  238. [ 0.000000] Kernel command line: root=/dev/mmcblk0p5 rw rootwait earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
  239. [ 0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space.
  240. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  241. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  242. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  243. [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
  244. [ 0.000000] Memory: 3735848K/4175872K available (14208K kernel code, 3378K rwdata, 6480K rodata, 6208K init, 554K bss, 177880K reserved, 262144K cma-reserved)
  245. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x18c with crng_init=0
  246. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  247. [ 0.000000] ftrace: allocating 49703 entries in 195 pages
  248. [ 0.000000] ftrace: allocated 195 pages with 4 groups
  249. [ 0.000000] trace event string verifier disabled
  250. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  251. [ 0.000000] rcu: .RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  252. [ 0.000000] .Trampoline variant of Tasks RCU enabled.
  253. [ 0.000000] .Rude variant of Tasks RCU enabled.
  254. [ 0.000000] .Tracing variant of Tasks RCU enabled.
  255. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  256. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  257. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  258. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  259. [ 0.000000] GICv3: 320 SPIs implemented
  260. [ 0.000000] GICv3: 0 Extended SPIs implemented
  261. [ 0.000000] GICv3: Distributor has no Range Selector support
  262. [ 0.000000] GICv3: MBI range [296:319]
  263. [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  264. [ 0.000000] Root IRQ handler: gic_handle_irq
  265. [ 0.000000] GICv3: 16 PPIs implemented
  266. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  267. [ 0.000000] ITS: No ITS available, not enabling LPIs
  268. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  269. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  270. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  271. [ 0.001699] Console: colour dummy device 80x25
  272. [ 0.002204] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  273. [ 0.003220] pid_max: default: 32768 minimum: 301
  274. [ 0.003904] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  275. [ 0.004661] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  276. [ 0.008428] rcu: Hierarchical SRCU implementation.
  277. [ 0.011343] EFI services will not be available.
  278. [ 0.012614] smp: Bringing up secondary CPUs ...
  279. [ 0.014070] Detected VIPT I-cache on CPU1
  280. [ 0.014119] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  281. [ 0.014185] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  282. [ 0.015330] Detected VIPT I-cache on CPU2
  283. [ 0.015370] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  284. [ 0.015419] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  285. [ 0.016611] Detected VIPT I-cache on CPU3
  286. [ 0.016648] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  287. [ 0.016692] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  288. [ 0.016872] smp: Brought up 1 node, 4 CPUs
  289. [ 0.022439] SMP: Total of 4 processors activated.
  290. [ 0.022905] CPU features: detected: 32-bit EL0 Support
  291. [ 0.023425] CPU features: detected: 32-bit EL1 Support
  292. [ 0.023935] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  293. [ 0.024778] CPU features: detected: Common not Private translations
  294. [ 0.025392] CPU features: detected: CRC32 instructions
  295. [ 0.025897] CPU features: detected: RCpc load-acquire (LDAPR)
  296. [ 0.026459] CPU features: detected: LSE atomic instructions
  297. [ 0.027068] CPU features: detected: Privileged Access Never
  298. [ 0.027620] CPU features: detected: RAS Extension Support
  299. [ 0.028153] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  300. [ 0.064258] CPU: All CPU(s) started at EL2
  301. [ 0.067016] devtmpfs: initialized
  302. [ 0.078280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  303. [ 0.079265] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  304. [ 0.087632] pinctrl core: initialized pinctrl subsystem
  305. [ 0.089130] DMI not present or invalid.
  306. [ 0.089973] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  307. [ 0.092948] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  308. [ 0.093867] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  309. [ 0.095006] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  310. [ 0.095911] audit: initializing netlink subsys (disabled)
  311. [ 0.096706] audit: type=2000 audit(0.093:1): state=initialized audit_enabled=0 res=1
  312. [ 0.098256] thermal_sys: Registered thermal governor 'fair_share'
  313. [ 0.098269] thermal_sys: Registered thermal governor 'bang_bang'
  314. [ 0.098870] thermal_sys: Registered thermal governor 'step_wise'
  315. [ 0.099460] thermal_sys: Registered thermal governor 'user_space'
  316. [ 0.100219] thermal_sys: Add a cooling_device property with at least one device
  317. [ 0.101553] thermal_sys: failed to build thermal zone cpu-thermal: -2
  318. [ 0.102401] cpuidle: using governor ladder
  319. [ 0.102848] cpuidle: using governor menu
  320. [ 0.103434] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  321. [ 0.104294] ASID allocator initialised with 65536 entries
  322. [ 0.105733] Serial: AMBA PL011 UART driver
  323. [ 0.132900] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  324. [ 0.134435] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  325. [ 0.136042] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  326. [ 0.137539] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  327. [ 0.139044] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  328. [ 0.156459] cryptd: max_cpu_qlen set to 1000
  329. [ 0.158105] ACPI: Interpreter disabled.
  330. [ 0.162254] iommu: Default domain type: Translated
  331. [ 0.162750] iommu: DMA domain TLB invalidation policy: strict mode
  332. [ 0.163821] vgaarb: loaded
  333. [ 0.165350] SCSI subsystem initialized
  334. [ 0.166045] usbcore: registered new interface driver usbfs
  335. [ 0.166653] usbcore: registered new interface driver hub
  336. [ 0.167228] usbcore: registered new device driver usb
  337. [ 0.168457] pps_core: LinuxPPS API ver. 1 registered
  338. [ 0.168951] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  339. [ 0.169861] PTP clock support registered
  340. [ 0.170294] EDAC MC: Ver: 3.0.0
  341. [ 0.171852] Advanced Linux Sound Architecture Driver Initialized.
  342. [ 0.173636] clocksource: Switched to clocksource arch_sys_counter
  343. [ 0.279513] pnp: PnP ACPI: disabled
  344. [ 0.293019] NET: Registered PF_INET protocol family
  345. [ 0.293883] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  346. [ 0.297355] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  347. [ 0.298332] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  348. [ 0.299374] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  349. [ 0.300594] TCP: Hash tables configured (established 32768 bind 32768)
  350. [ 0.301400] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  351. [ 0.302143] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  352. [ 0.303093] NET: Registered PF_UNIX/PF_LOCAL protocol family
  353. [ 0.304387] RPC: Registered named UNIX socket transport module.
  354. [ 0.304977] RPC: Registered udp transport module.
  355. [ 0.305440] RPC: Registered tcp transport module.
  356. [ 0.305903] RPC: Registered tcp NFSv4.1 backchannel transport module.
  357. [ 0.306536] NET: Registered PF_XDP protocol family
  358. [ 0.307050] PCI: CLS 0 bytes, default 64
  359. [ 0.308666] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  360. [ 0.310025] kvm [1]: IPA Size Limit: 40 bits
  361. [ 0.310508] kvm [1]: GICv3: no GICV resource entry
  362. [ 0.310985] kvm [1]: disabling GICv2 emulation
  363. [ 0.311442] kvm [1]: GIC system register CPU interface enabled
  364. [ 0.312243] kvm [1]: vgic interrupt IRQ9
  365. [ 0.312913] kvm [1]: VHE mode initialized successfully
  366. [ 1.159372] Initialise system trusted keyrings
  367. [ 1.160163] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  368. [ 1.168403] zbud: loaded
  369. [ 1.170955] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  370. [ 1.172429] NFS: Registering the id_resolver key type
  371. [ 1.172959] Key type id_resolver registered
  372. [ 1.173374] Key type id_legacy registered
  373. [ 1.173946] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  374. [ 1.174612] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  375. [ 1.230349] NET: Registered PF_ALG protocol family
  376. [ 1.230836] Key type asymmetric registered
  377. [ 1.231242] Asymmetric key parser 'x509' registered
  378. [ 1.231722] Asymmetric key parser 'pkcs8' registered
  379. [ 1.232209] Key type pkcs7_test registered
  380. [ 1.232779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  381. [ 1.233783] io scheduler mq-deadline registered
  382. [ 1.234237] io scheduler kyber registered
  383. [ 1.234881] io scheduler bfq registered
  384. [ 1.249087] EINJ: ACPI disabled.
  385. [ 1.258970] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
  386. [ 1.259650] dma-pl330 fe530000.dmac: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  387. [ 1.263376] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
  388. [ 1.264072] dma-pl330 fe550000.dmac: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  389. [ 1.269970] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  390. [ 1.273859] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 19, base_baud = 1500000) is a 16550A
  391. [ 1.276363] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 31, base_baud = 1500000) is a 16550A
  392. [ 1.277486] serial serial0: tty port ttyS1 registered
  393. [ 1.279245] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 32, base_baud = 1500000) is a 16550A
  394. [ 1.280428] printk: console [ttyS2] enabled
  395. [ 1.280428] printk: console [ttyS2] enabled
  396. [ 1.281216] printk: bootconsole [uart8250] disabled
  397. [ 1.281216] printk: bootconsole [uart8250] disabled
  398. [ 1.283396] Serial: AMBA driver
  399. [ 1.292603] cacheinfo: Unable to detect cache hierarchy for CPU 0
  400. [ 1.297179] libphy: Fixed MDIO Bus: probed
  401. [ 1.300062] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  402. [ 1.301084] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
  403. [ 1.301717] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
  404. [ 1.302223] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
  405. [ 1.302737] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  406. [ 1.303368] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
  407. [ 1.308960] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  408. [ 1.309786] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  409. [ 1.310462] rk_gmac-dwmac fe010000.ethernet: .DWMAC4/5
  410. [ 1.310927] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  411. [ 1.311589] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  412. [ 1.312249] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  413. [ 1.312871] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  414. [ 1.313529] rk_gmac-dwmac fe010000.ethernet: TSO supported
  415. [ 1.314047] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  416. [ 1.314760] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=8)
  417. [ 1.315388] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  418. [ 1.315923] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
  419. [ 1.450405] libphy: stmmac: probed
  420. [ 1.451009] mdio_bus stmmac-0: MDIO device at address 0 is missing.
  421. [ 1.456378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  422. [ 1.457023] ehci-pci: EHCI PCI platform driver
  423. [ 1.457475] ehci-platform: EHCI generic platform driver
  424. [ 1.458408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  425. [ 1.458976] ohci-pci: OHCI PCI platform driver
  426. [ 1.459425] ohci-platform: OHCI generic platform driver
  427. [ 1.460572] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
  428. [ 1.461288] usbcore: registered new interface driver usb-storage
  429. [ 1.461875] usbcore: registered new interface driver ums-realtek
  430. [ 1.462526] usbcore: registered new interface driver usbserial_generic
  431. [ 1.463134] usbserial: USB Serial support registered for generic
  432. [ 1.465697] mousedev: PS/2 mouse device common for all mice
  433. [ 1.605053] fan53555-regulator 0-001c: Failed to get chip ID!
  434. [ 1.744287] rk808 0-0020: failed to read the chip id at 0x17
  435. [ 1.752298] sdhci: Secure Digital Host Controller Interface driver
  436. [ 1.752862] sdhci: Copyright(c) Pierre Ossman
  437. [ 1.753760] Synopsys Designware Multimedia Card Interface Driver
  438. [ 1.755993] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  439. [ 1.756519] sdhci-pltfm: SDHCI platform and OF driver helper
  440. [ 1.756654] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  441. [ 1.757752] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  442. [ 1.758335] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 22,32 bit host data width,256 deep fifo
  443. [ 1.759637] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
  444. [ 1.759785] ledtrig-cpu: registered to indicate activity on CPUs
  445. [ 1.762284] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  446. [ 1.762928] hid: raw HID events driver (C) Jiri Kosina
  447. [ 1.763566] usbcore: registered new interface driver usbhid
  448. [ 1.764117] usbhid: USB HID core driver
  449. [ 1.773294] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  450. [ 1.775306] NET: Registered PF_PACKET protocol family
  451. [ 1.776140] Key type dns_resolver registered
  452. [ 1.777672] registered taskstats version 1
  453. [ 1.778063] Loading compiled-in X.509 certificates
  454. [ 1.779215] zswap: loaded using pool lzo/zbud
  455. [ 1.823450] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  456. [ 1.824509] mmc0: new high speed SDXC card at address 59b4
  457. [ 1.826286] mmcblk0: mmc0:59b4 SDU1 58.2 GiB
  458. [ 1.835312] GPT:Primary header thinks Alt. header is not at the end of the disk.
  459. [ 1.835992] GPT:4407411 != 122138623
  460. [ 1.836316] GPT:Alternate GPT header not at the end of the disk.
  461. [ 1.836845] GPT:4407411 != 122138623
  462. [ 1.837193] GPT: Use GNU Parted to correct GPT errors.
  463. [ 1.837695] mmcblk0: p1 p2 p3 p4 p5
  464. [ 1.865278] ALSA device list:
  465. [ 1.865577] No soundcards found.
  466. [ 1.866199] dw-apb-uart fe660000.serial: forbid DMA for kernel console
  467. [ 1.948592] EXT4-fs (mmcblk0p5): recovery complete
  468. [ 1.955080] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  469. [ 1.956057] VFS: Mounted root (ext4 filesystem) on device 179:5.
  470. [ 1.958578] devtmpfs: mounted
  471. [ 1.968281] Freeing unused kernel memory: 6208K
  472. [ 1.968851] Run /sbin/init as init process
  473. [ 1.969222] with arguments:
  474. [ 1.969492] /sbin/init
  475. [ 1.969738] with environment:
  476. [ 1.970019] HOME=/
  477. [ 1.970233] TERM=linux
  478. [ 1.970552] MM_DEBUG=yes
  479. [ 1.979836] random: fast init done
  480. [ 2.628035] udevd[201]: starting version 3.2.10
  481. [ 2.639435] random: udevd: uninitialized urandom read (16 bytes read)
  482. [ 2.641860] random: udevd: uninitialized urandom read (16 bytes read)
  483. [ 2.642520] random: udevd: uninitialized urandom read (16 bytes read)
  484. [ 2.661340] udevd[202]: starting eudev-3.2.10
  485. [ 2.936850] rockchip-thermal fe710000.tsadc: failed to register sensor 0: -517
  486. [ 2.937688] rockchip-thermal fe710000.tsadc: failed to register sensor[0] : error = -517
  487. [ 2.945028] rockchip-thermal fe710000.tsadc: failed to register sensor 0: -517
  488. [ 2.945703] rockchip-thermal fe710000.tsadc: failed to register sensor[0] : error = -517
  489. [ 3.106733] Bluetooth: Core ver 2.22
  490. [ 3.107381] NET: Registered PF_BLUETOOTH protocol family
  491. [ 3.107873] Bluetooth: HCI device and connection manager initialized
  492. [ 3.108462] Bluetooth: HCI socket layer initialized
  493. [ 3.108912] Bluetooth: L2CAP socket layer initialized
  494. [ 3.109405] Bluetooth: SCO socket layer initialized
  495. [ 3.141394] Bluetooth: HCI UART driver ver 2.3
  496. [ 3.141825] Bluetooth: HCI UART protocol H4 registered
  497. [ 3.142284] Bluetooth: HCI UART protocol BCSP registered
  498. [ 3.142892] Bluetooth: HCI UART protocol LL registered
  499. [ 3.143356] Bluetooth: HCI UART protocol ATH3K registered
  500. [ 3.144091] Bluetooth: HCI UART protocol Three-wire (H5) registered
  501. [ 3.145045] Bluetooth: HCI UART protocol Intel registered
  502. [ 3.145904] Bluetooth: HCI UART protocol Broadcom registered
  503. [ 3.146491] Bluetooth: HCI UART protocol QCA registered
  504. [ 3.147072] Bluetooth: HCI UART protocol Marvell registered
  505. + /etc/rc.d/init.d/dhcp start
  506. [ 8.925842] rk_gmac-dwmac fe010000.ethernet eth0: no phy at addr -1
  507. [ 8.926427] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!