Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 2016-04-27 19:14:31] [Output] : ★ Alexander Rinkk extends one of his feet and his right hand as he proceeds to drive into Invicto Motorsports
- [2016-04-27 19:14:44] [Output] : ★ -..in his Subaru Impreza 2.5RS, as he slowly drives it up on a lift. ((Alexander Rinkk))
- [2016-04-27 19:15:24] [Output] : ★ Alexander Rinkk extends his right hand, grabbing his flathead screwdriver from his pocket as he proceeds-..
- [2016-04-27 19:15:37] [Output] : ★ -..to start unbolting the cover for the ECU compartiment ((Alexander Rinkk))
- [2016-04-27 19:16:40] [Output] : ★ Alexander Rinkk proceeds to take it off along with the screws as he places it on the dash before-..
- [2016-04-27 19:16:49] [Output] : ★ -..grabbing the old ECU unit, disconnecting it. ((Alexander Rinkk))
- [2016-04-27 19:17:03] [Output] : ★ Alexander Rinkk sets the old ECU aside, proceeding to get out of the car and grab a box with -..
- [2016-04-27 19:17:16] [Output] : ★ -..''haltech'' written on it, opening it up with his bare hands as he proceeds to take the-. ((Alexander Rinkk))
- [2016-04-27 19:17:28] [Output] : ★ -..Elite 2500 Subaru ECU unit, heading back inside the car. ((Alexander Rinkk))
- [2016-04-27 19:17:39] [Output] : ★ Alexander Rinkk connects the new ECU where the old one would have been connected as he proceeds-..
- [2016-04-27 19:17:47] [Output] : ★ -..to grab the lid, setting it into place before bolting the four bolts. ((Alexander Rinkk))
- [2016-04-27 19:18:07] [Output] : ★ Alexander Rinkk gets out of the car as he heads towards his toolbox, opening it with his right hand as he -.
- [2016-04-27 19:18:20] [Output] : ★ -..takes out a ratchet with a few heads, those beign 10MM, 12MM, 14MM. ((Alexander Rinkk))
- [2016-04-27 19:18:37] [Output] : ★ Alexander Rinkk heads back into the car as he proceeds to grab a latch for the front seat, pulling it-..
- [2016-04-27 19:18:51] [Output] : ★ -..fowards before stepping into the back of the vehicle. ((Alexander Rinkk))
- [2016-04-27 19:19:03] [Output] : ★ Alexander Rinkk leans down, extending his right hand as he proceeds to unbolt the rear seat bolts-..
- [2016-04-27 19:19:08] [Output] : ★ -..as it would eventually become loose. ((Alexander Rinkk))
- [2016-04-27 19:19:26] [Output] : ★ Alexander Rinkk heads towards the front seat as he proceeds to start unbolting it aswell, taking it out-..
- [2016-04-27 19:19:32] [Output] : ★ -..for availability to take out the rear seat. ((Alexander Rinkk))
- [2016-04-27 19:19:50] [Output] : ★ Alexander Rinkk grabs the rear seat as he proceeds to start pulling it diagonally, slowly walking out of the
- [2016-04-27 19:19:56] [Output] : ★ -..vehicle with it, setting it aside on the ground. ((Alexander Rinkk))
- [2016-04-27 19:20:14] [Output] : ★ Alexander Rinkk grabs the driverside seat, placing it on it's support as he proceeds to hold it into place-.
- [2016-04-27 19:20:23] [Output] : ★ -..before grabbing the bolts, bolting them into place. ((Alexander Rinkk))
- [2016-04-27 19:21:33] [Output] : ★ Alexander Rinkk heads back towards the back of the vehicle, peering at the fuel pump assembly as he -..
- [2016-04-27 19:21:42] [Output] : ★ -..grabs the 12MM ratchet, starting to unbolt the assembly. ((Alexander Rinkk))
- [2016-04-27 19:21:52] [Output] : ★ Alexander Rinkk extends both of his hands, setting the ratchet aside as he proceeds to disconnect-..
- [2016-04-27 19:21:56] [Output] : ★ -..the following cables: ((Alexander Rinkk))
- [2016-04-27 19:22:04] [Output] : ★ Electric, vent line, and two fuel lines. ((Alexander Rinkk))
- [2016-04-27 19:22:21] [Output] : ★ Alexander Rinkk as he disconnects the two fuel lines, he grabs a rag to cover the jet of fuel before he-..
- [2016-04-27 19:22:31] [Output] : ★ -..grabs the clamps for the wires, unbolting them with his phillips head screwdriver-.. ((Alexander Rinkk))
- [2016-04-27 19:23:04] [Output] : ★ -..and setting them aside, grabbing the assembly as he lifts it up, setting it aside. ((Alexander Rinkk))
- [2016-04-27 19:23:34] [Output] : ★ Alexander Rinkk heads outside of the car towards the parts box pile, grabbing a Walbro box as he proceeds-..
- [2016-04-27 19:23:41] [Output] : ★ -..to open it up using his bare hands, taking out the assembly. ((Alexander Rinkk))
- [2016-04-27 19:23:51] [Output] : ★ Alexander Rinkk slowly walks back into the car, watching his head before leaning down, extending his-..
- [2016-04-27 19:24:03] [Output] : ★ -..hand further, putting the assembly carefully inside the enclosure. ((Alexander Rinkk))
- [2016-04-27 19:24:16] [Output] : ★ Alexander Rinkk grabs the vent line, connecting it before connecting the two fuel lines as he proceeds-..
- [2016-04-27 19:24:22] [Output] : ★ --..to grab the electric cable, connecting it. ((Alexander Rinkk))
- [2016-04-27 19:25:26] [Output] : ★ Alexander Rinkk grabs the 12mm ratchet as he proceeds to bolt in the assembly, grabbing the two-..
- [2016-04-27 19:25:34] [Output] : ★ -..brackets for the fuel lines, bolting them in. ((Alexander Rinkk))
- [2016-04-27 19:29:03] [Output] : ★ Alexander Rinkk proceeds to slowly walk out of the car, wiping the sweat off of his forehead as he -..
- [2016-04-27 19:29:08] [Output] : ★ -..looks towards the wheel. ((Alexander Rinkk))
- [2016-04-27 19:29:31] [Output] : ★ Alexander Rinkk extends his right hand, grabbing the impact wrench as he leans down, extending his hand-..
- [2016-04-27 19:29:41] [Output] : ★ -..further, as he proceeds to start unbolting the bolts for the stock rim. ((Alexander Rinkk))
- [2016-04-27 19:30:43] [Output] : ★ Alexander Rinkk sets the impact wrench aside, grabbing the wheel as hhe leans back with it, setting it aside
- [2016-04-27 19:31:04] [Output] : ★ -..Before looking at the worn out strut assembly. ((Alexander Rinkk))
- [2016-04-27 19:31:14] [Output] : ★ Alexander Rinkk extends both of his hands, lifting himself up before going towards the open door-..
- [2016-04-27 19:31:31] [Output] : ★ -..grabbing the latch for the bonnet, slipping his fingers underneath before lifting it up-. ((Alexander Rinkk))
- [2016-04-27 19:31:38] [Output] : ★ -..and grabbing the rod holding it up. ((Alexander Rinkk))
- [2016-04-27 19:31:49] [Output] : ★ Alexander Rinkk grabs his ratchet as he proceeds to start unbolting the bonnet, grabbing it with both-..
- [2016-04-27 19:32:08] [Output] : ★ -..of his hands, setting it aside. ((Alexander Rinkk))
- [2016-04-27 19:32:18] [Output] : ★ Alexander Rinkk grabs a small flathead screwdriver from the toolbox as he runs it across the opening-..
- [2016-04-27 19:32:29] [Output] : ★ -..for the front bumper, undoing the latches for the front bumper. ((Alexander Rinkk))
- [2016-04-27 19:32:39] [Output] : ★ Alexander Rinkk sets it aside before grabbing a 12mm ratchet as he proceeds to start unbolting the-..
- [2016-04-27 19:32:41] [Output] : ★ -..front bumper. ((Alexander Rinkk))
- [2016-04-27 19:35:00] [Output] : ★ Alexander Rinkk extends both of his hands, grabbing the front bumper as he sets it aside on the-..
- [2016-04-27 19:35:08] [Output] : ★ -..floor, looking at the engine bay. ((Alexander Rinkk))
- [2016-04-27 19:36:45] [Output] : ★ Alexander Rinkk extends his right hand, grabbing a 19mm wrench and socket ratchet before-..
- [2016-04-27 19:36:52] [Output] : ★ -..heading towards the strut assembly, unbolting two bolts. ((Alexander Rinkk))
- [2016-04-27 19:37:12] [Output] : ★ Alexander Rinkk extends his right hand, unboltting the bolts for the ABS plug and fuel line, disconnecting-.
- [2016-04-27 19:37:14] [Output] : ★ -..both. ((Alexander Rinkk))
- [2016-04-27 19:37:26] [Output] : ★ Alexander Rinkk extends his right hand, grabbing a impact wrench as he proceeds to start unbolting-..
- [2016-04-27 19:38:35] [Output] : ★ -..the two bolts holding the brake caliper, slipping it off. ((Alexander Rinkk))
- [2016-04-27 19:38:47] [Output] : ★ Alexander Rinkk proceeds to unbolt the bolts for the brake pad bracket, taking it off along with the-..
- [2016-04-27 19:38:49] [Output] : ★ -..brake pads. ((Alexander Rinkk))
- [2016-04-27 19:39:03] [Output] : ★ Alexander Rinkk proceeds to start unbolting the rotor assembly as he slowly slips the whole assembly-..
- [2016-04-27 19:39:12] [Output] : ★ -..off. ((Alexander Rinkk))
- [2016-04-27 19:39:21] [Output] : ★ Alexander Rinkk extends his right hand, grabbing the impact wrench as he heads towards the bonnet-..
- [2016-04-27 19:39:31] [Output] : ★ -..or where it would have been, as he unbolts the three bolts for the strut assembly-.. ((Alexander Rinkk))
- [2016-04-27 19:39:38] [Output] : ★ -..heading down towards the wheel once again. ((Alexander Rinkk))
- [2016-04-27 19:41:33] [Output] : ★ Alexander Rinkk extends his right hand, grabbing the lower control arm as he starts pulling it around before
- [2016-04-27 19:41:45] [Output] : ★ -..extending his right hand, grabbing the trust assembly as he starts pulling on it-.. ((Alexander Rinkk))
- [2016-04-27 19:41:49] [Output] : ★ -..before taking it out as a whole. ((Alexander Rinkk))
- [2016-04-27 19:42:23] [Output] : ★ Alexander Rinkk heads towards the parts bin as he grabs two boxes, one for the racing coilovers and one-..
- [2016-04-27 19:42:35] [Output] : ★ -..for the 380MM Brake kit. ((Alexander Rinkk))
- [2016-04-27 19:43:20] [Output] : ★ Alexander Rinkk extends his right hand, ripping open the packaging for the coilover assembly as he-..
- [2016-04-27 19:43:34] [Output] : ★ -..proceeds to slip it inside where the strut assembly was, grabbing the lower control-.. ((Alexander Rinkk))
- [2016-04-27 19:44:27] [Output] : ★ -..arm as he keeps it up, grabbing the 19MM bolts and ratchet, bolting one in before-.. ((Alexander Rinkk))
- [2016-04-27 19:44:38] [Output] : ★ -.. letting go of the lower control arm, bolting the other bolt in aswell. ((Alexander Rinkk))
- [2016-04-27 19:44:55] [Output] : ★ Alexander Rinkk proceeds to lift himself up, extending his right hand as he proceeds to go up towards-..
- [2016-04-27 19:45:09] [Output] : ★ -..the coilover assembly's top bit, bolting it in using his impact wrench. ((Alexander Rinkk))
- [2016-04-27 19:45:21] [Output] : ★ Alexander Rinkk proceeds to set his tool aside, grabbing the box for the brakes as he proceeds to start-..
- [2016-04-27 19:45:35] [Output] : ★ -.. ripping the packaging apart with his hands, as he takes out the humongous-.. ((Alexander Rinkk))
- [2016-04-27 19:45:40] [Output] : ★ -..380MM assembly. ((Alexander Rinkk))
- [2016-04-27 19:45:54] [Output] : ★ Alexander Rinkk extends both of his hands, placing the 380MM Brembo brakes in as he proceeds to grab-..
- [2016-04-27 19:46:01] [Output] : ★ -..the bolts for the assembly, bolting the rotor in. ((Alexander Rinkk))
- [2016-04-27 19:46:10] [Output] : ★ It would come with the pads and calipers already assembled! ((Alexander Rinkk))
- [2016-04-27 19:46:28] [Output] : ★ Alexander Rinkk extends his right hand, grabbing the ABS and brake line, bolting both in and connecting-..
- [2016-04-27 19:46:32] [Output] : ★ -..them,. ((Alexander Rinkk))
- [2016-04-27 19:46:43] [Output] : ★ Alexander Rinkk lifts himself up, heading towards the parts bin as he proceeds to peer at the four-..
- [2016-04-27 19:48:20] [Output] : ★ -..22B Rims with drag legal radial tires as he heads towards them, grabbing one with-.. ((Alexander Rinkk))
- [2016-04-27 19:48:33] [Output] : ★ -..both of his hands, extending both of his hands as he proceeds to put it on the lugs-.. ((Alexander Rinkk))
- [2016-04-27 19:48:38] [Output] : ★ -..as he grabs the lug nuts, bolting it in./ ((Alexander Rinkk))
- [2016-04-27 19:48:49] [Output] : ★ The 380MM brakes would fill in the rim nicely, fitting perfectly. ((Alexander Rinkk))
- [2016-04-27 19:49:00] [Output] : ★ He would repeat the process for the other side nad the rear, the only difference beign-.. ((Alexander Rinkk))
- [2016-04-27 19:49:11] [Output] : ★ -..that he would open the trunk for the rear of the vehicle. ((Alexander Rinkk))
- [2016-04-27 19:50:52] [Output] : ★ Alexander Rinkk extends both of his hands, grabbing a 12mm ratchet as he heads towards the radiator-..
- [2016-04-27 19:51:49] [Output] : ★ -..pulling out the radiator hoses forcefully as he proceeds to hold the radiator with-.. ((Alexander Rinkk))
- [2016-04-27 19:52:02] [Output] : ★ -..one of his hands while unbolting it with the other, grabbing tightly once it becomes-.. ((Alexander Rinkk))
- [2016-04-27 19:52:09] [Output] : ★ -..loose, pulling it up and setting it aside. ((Alexander Rinkk))
- [2016-04-27 19:52:35] [Output] : ★ Alexander Rinkk extends his right hand, unbolting the two bolts holding the windshield washer assembly-..
- [2016-04-27 19:52:46] [Output] : ★ -...as he lifts it up as a whole, placing the container aside. ((Alexander Rinkk))
- [2016-04-27 19:52:59] [Output] : ★ Alexander Rinkk extends both of his hands, as he grasps onto one of the fuel lines tightly before unbolting-
- [2016-04-27 19:53:13] [Output] : ★ -..the two bolts holding it into place, lifting it up as he'd do the same for the other sid- ((Alexander Rinkk))
- [2016-04-27 19:53:19] [Output] : ★ -..e of the 2.5 Single Cam boxer engine. ((Alexander Rinkk))
- [2016-04-27 19:54:42] [Output] : ★ Alexander Rinkk proceeds to head towards the lift commands, as he presses a button, lifting the vehicle-..
- [2016-04-27 19:54:55] [Output] : ★ -..up into the air, as he grabs a red bucket, placing it underneath the engine as he proceed ((Alexander Rinkk))
- [2016-04-27 19:55:35] [Output] : ★ -..s to grab a ratchet, undoing the bolt for the oil pan's assembly as the liquid proceeds-. ((Alexander Rinkk))
- [2016-04-27 19:55:40] [Output] : ★ -..to start pouring out into the bucket. ((Alexander Rinkk))
- [2016-04-27 19:55:59] [Output] : ★ Alexander Rinkk extends his right hand into the engine bay from underneath as he starts unbolting-..
- [2016-04-27 19:56:21] [Output] : ★ -..the exhaust manifold bolts for the left one while the oil is pouring out as he-.. ((Alexander Rinkk))
- [2016-04-27 19:56:36] [Output] : ★ -..then proceeds to unbolt it from the downpipe, taking one of the exhaust manifolds-.. ((Alexander Rinkk))
- [2016-04-27 19:56:39] [Output] : ★ -..out. ((Alexander Rinkk))
- [2016-04-27 19:57:23] [Output] : ★ Proceeds to do the same for the other exhaust manifold with absolutely no difference. ((Alexander Rinkk))
- [2016-04-27 19:58:35] [Output] : ★ Alexander Rinkk proceeds to extend his right hand towards the U-joint holding the main driveshaft-..
- [2016-04-27 19:58:37] [Output] : ★ -..into place. ((Alexander Rinkk))
- [2016-04-27 19:58:47] [Output] : ★ Alexander Rinkk extends his right hand, grabbing a 19mm ratchet as he starts undoing the bolts for the-..
- [2016-04-27 19:59:17] [Output] : ★ -..U Joint, taking it off before he proceeds to push it in slightly as towards the diff-.. ((Alexander Rinkk))
- [2016-04-27 19:59:26] [Output] : ★ -..as it becomes separated from the transmission. ((Alexander Rinkk))
- [2016-04-27 20:00:09] [Output] : ★ Alexander Rinkk extends his right hand, undoing the U-joint for the left side driveshaft before setting-..
- [2016-04-27 20:00:18] [Output] : ★ -..the joint aside, as the driveshaft becomes loose from the tranny. ((Alexander Rinkk))
- [2016-04-27 20:00:25] [Output] : ★ He would repeat the process for the second side driveshaft. ((Alexander Rinkk))
- [2016-04-27 20:01:10] [Output] : ★ Alexander Rinkk extends both of his hands as he proceeds to grab a ratchet, as he starts undoing the bolts-.
- [2016-04-27 20:01:21] [Output] : ★ -..for the transmission pan, as he grabs the bucket, setting it underneath the-.. ((Alexander Rinkk))
- [2016-04-27 20:01:32] [Output] : ★ -..transmission, before he takes off the pan and let's the fluid drip into the bucket. ((Alexander Rinkk))
- [2016-04-27 20:03:29] [Output] : ★ Alexander Rinkk lowers the car again as he proceeds to head towards the engine bay, grabbing the airbox-..
- [2016-04-27 20:03:39] [Output] : ★ -..as he starts taking off the latches holding it into place, throwing it away. ((Alexander Rinkk))
- [2016-04-27 20:05:07] [Output] : ★ Alexander Rinkk proceeds to start disconnecting the remaining wires, disconnecting the battery and-..
- [2016-04-27 20:05:16] [Output] : ★ -..starter and whatnot, as the engine would now be fully disconnected from the-.. ((Alexander Rinkk))
- [2016-04-27 20:05:20] [Output] : ★ -..electrical system of the vehicle. ((Alexander Rinkk))
- [2016-04-27 20:08:40] [Output] : ★ Alexander Rinkk proceeds to lift the vehicle onto the lift as he heads towards the underside of the vehicle-
- [2016-04-27 20:08:54] [Output] : ★ -..proceeding to grab a impact wrench, as he starts undoing the bolts for the engine mounts- ((Alexander Rinkk))
- [2016-04-27 20:09:07] [Output] : ★ -..as the engine would not drop due to it still beign held by the mounts, just not stabily. ((Alexander Rinkk))
- [2016-04-27 20:10:06] [Output] : ★ Alexander Rinkk lowers the vehicle down as he proceeds to grab the engine hoist, heading towards the-..
- [2016-04-27 20:10:17] [Output] : ★ -..vehicle, lowering the chains onto the hoise. ((Alexander Rinkk))
- [2016-04-27 20:11:27] [Output] : ★ Hoist* ((Alexander Rinkk))
- [2016-04-27 20:11:37] [Output] : ★ Alexander Rinkk extends both of his hands, arching his back into the engine bay as he proceeds to-..
- [2016-04-27 20:11:49] [Output] : ★ -..start hooking the engine up to the hoist tightly, as the chains would hold it into place. ((Alexander Rinkk))
- [2016-04-27 20:12:06] [Output] : ★ Alexander Rinkk extends his foot as he starts pumping the crane, lifting the engine up slowly as about-..
- [2016-04-27 20:12:13] [Output] : ★ -..halfway he starts adjusting the angle the engine comes out. ((Alexander Rinkk))
- [2016-04-27 20:13:25] [Output] : ★ After a while of pumping, the engine would be completly out. ((Alexander Rinkk))
- [2016-04-27 20:13:38] [Output] : ★ Alexander Rinkk extends both of his hands as he proceeds to start pushing the engine towards the side-..
- [2016-04-27 20:13:50] [Output] : ★ -..of the garage, putting it down as he looks at two crates. ((Alexander Rinkk))
- [2016-04-27 20:14:03] [Output] : ★ Alexander Rinkk extends his right hand, grabbing a crowbar as he heads towards the first crate, popping it-.
- [2016-04-27 20:15:15] [Output] : ★ -..open as it reveals the Closed Deck EJ257 Racing engine, as he looks at it, smiling. ((Alexander Rinkk))
- [2016-04-27 20:15:35] [Output] : ★ Alexander Rinkk proceeds to open the crate for the six speed fully sequential rally gearbox as he looks at i
- [2016-04-27 20:15:40] [Output] : ★ -..it before grabbing a 12mm socket. ((Alexander Rinkk))
- [2016-04-27 20:15:53] [Output] : ★ Alexander Rinkk proceeds to start unbolting the shift linkage for the transmission, setting it aside.
- [2016-04-27 20:16:12] [Output] : ★ Alexander Rinkk slowly extends his right hand, opening the door for the car as he heads to the centre consol
- [2016-04-27 20:16:33] [Output] : ★ -..e as he starts removing the leather bit that would be over the sift linkage. ((Alexander Rinkk))
- [2016-04-27 20:17:17] [Output] : ★ Shift* ((Alexander Rinkk))
- [2016-04-27 20:17:30] [Output] : ★ Alexander Rinkk proceeds to extends both of his hands, pushing the welder towards the vehicle as he-..
- [2016-04-27 20:17:57] [Output] : ★ -..heads to the pile of parts, grabbing a drill and a rollcage assembly. ((Alexander Rinkk))
- [2016-04-27 20:18:11] [Output] : ★ Alexander Rinkk proceeds to get into the car, bolting holes into the floorboard for the rollcage base.
- [2016-04-27 20:18:25] [Output] : ★ Alexander Rinkk unpacks the rollcage assembly, taking out the base pieces before he bolts them in-..
- [2016-04-27 20:18:28] [Output] : ★ -..using his drill. ((Alexander Rinkk))
- [2016-04-27 20:18:53] [Output] : ★ Alexander Rinkk proceeds to grab a welding mask, putting it onto his head as he starts the welder-..
- [2016-04-27 20:19:05] [Output] : ★ -..grabbing the rollcage pieces as he starts welding them one to the other in a "X"-.. ((Alexander Rinkk))
- [2016-04-27 20:19:20] [Output] : ★ -..pattern where the rear seat would be placed before he would go and start welding-.. ((Alexander Rinkk))
- [2016-04-27 20:19:32] [Output] : ★ -..the pieces all the way to the A and B pillar, forming something resembling a-.. ((Alexander Rinkk))
- [2016-04-27 20:19:36] [Output] : ★ -..Subaru WRC Rollcage. ((Alexander Rinkk))
- [2016-04-27 20:19:49] [Output] : ★ Alexander Rinkk turns off the welder, setting it aside as he takes off the welding mask, scratching-..
- [2016-04-27 20:19:57] [Output] : ★ -..his scalp before heading towards the engine and transmission. ((Alexander Rinkk))
- [2016-04-27 20:20:28] [Output] : ★ Alexander Rinkk extends both of his hands, grabbing the transmission as he starts pushing it along-..
- [2016-04-27 20:20:31] [Output] : ★ -..the ground towards the engine. ((Alexander Rinkk))
- [2016-04-27 20:20:51] [Output] : ★ Alexander Rinkk slips the transmission onto the twinplate flywheel/clutch assembly as he grabs the-..
- [2016-04-27 20:21:00] [Output] : ★ -.. 12 bolts holding it into place, bolting them in using his impact wrench. ((Alexander Rinkk))
Advertisement
Add Comment
Please, Sign In to add comment