prosody.cfg.lua

-- Prosody Example Configuration File
--
-- Information on configuring Prosody can be found on our
-- website at http://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running: prosodyctl check config
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- The only thing left to do is rename this file to remove the .dist ending, and fill in the
-- blanks. Good luck, and happy Jabbering!


---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts

-- This is a (by default, empty) list of accounts that are admins
-- for the server. Note that you must create the accounts separately
-- (see http://prosody.im/doc/creating_accounts for info)
-- Example: admins = { "user1@localhost", "[email protected]" }
admins = { "[email protected]", "[email protected]" }

-- Enable use of libevent for better performance under high load
-- For more information see: http://prosody.im/doc/libevent
   use_libevent = true;


cross_domain_bosh = "*";
cross_domain_websocket = true;
consider_websocket_secure = true;

smacks_hibernation_time = 300;

default_archive_policy = true; -- other options are false or "roster";
max_archive_query_results = 500;

-- This is the list of modules Prosody will load on startup.
-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
-- Documentation on modules can be found at: http://prosody.im/doc/modules
modules_enabled = {

	-- Generally required
		"offline";
		"posix";
		"roster"; -- Allow users to have a roster. Recommended ;)
		"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
		"tls"; -- Add support for secure TLS on c2s/s2s connections
		"dialback"; -- s2s dialback support
		"disco"; -- Service discovery

	-- Not essential, but recommended
		"private"; -- Private XML storage (for room bookmarks, etc.)
		"vcard"; -- Allow users to set vCards

	-- These are commented by default as they have a performance impact
		--"blocklist"; -- Support privacy lists
		"compression"; -- Stream compression (Debian: requires lua-zlib module to work)
		"admin_web";
		"blocklist";
		"pastebin";
		"http";
		"blocking";
		"http_index";
		"munin";
		"csi";
		"bidi";
	    "register_web";
		"auto_accept_subscriptions";
		"cloud_notify";
		"lastactivity";
		"version"; -- Replies to server version requests
		"uptime"; -- Report how long server has been running
		"time"; -- Let others know the time here on this server
		"ping"; -- Replies to XMPP pings with pongs
		"pep"; -- Enables users to publish their mood, activity, playing music and more
		"register"; -- Allow users to register on this server using a client and change passwords

	-- Admin interfaces
		"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
		--"admin_telnet"; -- Opens telnet console interface on localhost port 5582

	-- HTTP modules
		"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
		"http_files"; -- Serve static files from a directory over HTTP

	-- Other specific functionality
		--"groups"; -- Shared roster support
		"announce"; -- Send announcement to all online users
		"welcome"; -- Welcome users who register accounts
		"watchregistrations"; -- Alert admins of registrations
		"motd"; -- Send a message to users when they log in
		--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
		"mam";
		"websocket";
		"carbons";
		"smacks";
		"idlecompat";
		"mam_archive";
archive_conversation_interval = 86400; -- defined in seconds. One day by default
storage = {
 archive2 = "sql";
};

		"offline";
		--"turncredentials";
		"http_altconnect";
		--"auth_external";
 };


-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
	-- "offline"; -- Store offline messages
	-- "c2s"; -- Handle client connections
	-- "s2s"; -- Handle server-to-server connections
	-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
};

-- Disable account creation by default, for security
-- For more information see http://prosody.im/doc/creating_accounts
allow_registration = true;

-- Debian:
--   send the server to background.
--
daemonize = true;

-- Debian:
--   Please, don't change this option since /var/run/prosody/
--   is one of the few directories Prosody is allowed to write to
--
pidfile = "/var/run/prosody/prosody.pid";

-- These are the SSL/TLS-related settings. If you don't want
-- to use SSL/TLS, you may comment or remove this
ssl = {
	key = "/usr/local/etc/prosody/certs/siqchat.tk.key";
	certificate = "/usr/local/etc/prosody/certs/siqchat.tk.crt";
}

-- Force clients to use encrypted connections? This option will
-- prevent clients from authenticating unless they are using encryption.

c2s_require_encryption = true

-- Force certificate authentication for server-to-server connections?
-- This provides ideal security, but requires servers you communicate
-- with to support encryption AND present valid, trusted certificates.
-- NOTE: Your version of LuaSec must support certificate verification!
-- For more information see http://prosody.im/doc/s2s#security

s2s_secure_auth = true

-- Many servers don't support encryption or have invalid or self-signed
-- certificates. You can list domains here that will not be required to
-- authenticate using certificates. They will be authenticated using DNS.

s2s_insecure_domains = { "gmail.com", "emevth.no-ip.biz" }

-- Even if you leave s2s_secure_auth disabled, you can still require valid
-- certificates for some domains by specifying a list here.

s2s_secure_domains = { "jabber.org", "movim.eu", "emevth.no-ip.biz" }

-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
-- To allow Prosody to offer secure authentication mechanisms to clients, the
-- default provider stores passwords in plaintext. If you do not trust your
-- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed
-- for information about using the hashed backend.

authentication = "internal_plain"

--Include '/etc/prosody/prosody-ldap.cfg.lua'

-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See http://prosody.im/doc/storage for more info.

default_storage = "sql"
--storage = "sql" -- Default is "internal" (Debian: "sql" requires one of the
-- lua-dbi-sqlite3, lua-dbi-mysql or lua-dbi-postgresql packages to work)

-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
sql = { driver = "MySQL", database = "prosody", username = "root", password = "koobec360", host = "localhost" }
--sql = { driver = "MySQL", database = "{{DB_NAME}}", username = "{{root}}", password = "{{koobec360}}", host = "{{localhost}}" }

-- Logging configuration
-- For advanced logging see http://prosody.im/doc/logging
--
-- Debian:
--  Logs info and higher to /var/log
--  Logs errors to syslog also
log = {
	info = "*console";
	-- Log files (change 'info' to 'debug' for debug logs):
	debug = "/var/log/prosody/prosody.log";
	error = "/var/log/prosody/prosody.err";
	-- Syslog:
	{ levels = { "error" }; to = "syslog";  };
}

----------- Virtual hosts -----------
-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
-- Settings under each VirtualHost entry apply *only* to that host.

VirtualHost "siqchat.tk"
	-- enabled = false -- Remove this line to enable this host

	-- Assign this host a certificate for TLS, otherwise it would use the one
	-- set in the global section (if any).
	-- Note that old-style SSL on port 5223 only supports one certificate, and will always
	-- use the global one.



------ Components ------
-- You can specify components to add hosts that provide special services,
-- like multi-user conferences, and transports.
-- For more information on components, see http://prosody.im/doc/components

---Set up a MUC (multi-user chat) room server on conference.localhost:
Component "chat.siqchat.tk" "muc"
modules_enabled = { "pastebin" }
modules_enabled = {
  "mam_muc",
}

storage = {
    muc_log = "sql"; -- Requires 0.10 or later
}

muc_log_by_default = true; -- Enable logging by default (can be disabled in room config)

muc_log_all_rooms = false; -- set to true to force logging of all rooms

-- This is the largest number of messages that are allowed to be retrieved in one MAM request.
max_archive_query_results = 20;

-- This is the largest number of messages that are allowed to be retrieved when joining a room.
max_history_messages = 1000;

    name = "The siqchat chatrooms server"
    restrict_room_creation = "local";
    max_history_messages = 50; -- This is the largest number of messages that are allowed to be retrieved when joining a room
    max_archive_query_results = 50; -- This is the largest number of messages that are allowed to be retrieved in one MAM request
    muc_log_by_default = true;  -- Enable logging by default (can be disabled in room config)
    muc_log_all_rooms = true; -- set to true to force logging of all rooms
ssl = {
		key = "/usr/local/etc/prosody/certs/siqchat.tk.key";
		certificate = "/usr/local/etc/prosody/certs/siqchat.tk.crt";
	}


-- Set up a SOCKS5 bytestream proxy for server-proxied file transfers:
   --Component "proxy.openport.io" "proxy65"
	--modules_enabled = {
 	--"http_upload";
--}
--http_upload_file_size_limit = 10 * 1024 * 1024 -- this is 10MB in bytes
--http_upload_path = "/root/suzyo"
---Set up an external component (default component port is 5347)
--
-- External components allow adding various services, such as gateways/
-- transports to other networks like ICQ, MSN and Yahoo. For more info
-- see: http://prosody.im/doc/components#adding_an_external_component
--
--Component "gateway.localhost"
--	component_secret = "password"
Component "[email protected]" "admin_message"

Component "pubsub.siqchat.tk" "pubsub"
name = "The siqchat pubsub server"

Component "search.siqchat.tk" "vjud"
name = "The siqchat search server"


Component "upload.siqchat.tk" "http_upload"
name = "The siqchat Upload server"
http_upload_file_size_limit = 10 * 1024 * 1024 -- this is 10MB in bytes
http_upload_path = "/var/lib/prosody/"
ssl = {
		key = "/usr/local/etc/prosody/certs/siqchat.tk.key";
		certificate = "/usr/local/etc/prosody/certs/siqchat.tk.crt";
	}

------ Additional config files ------
-- For organizational purposes you may prefer to add VirtualHost and
-- Component definitions in their own config files. This line includes
-- all config files in /etc/prosody/conf.d/

--Include "conf.d/*.cfg.lua"