API tools faq
paste
Advertisement
Guest User

smartctl 6/2/2025

a guest
Jun 4th, 2025
30
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.96 KB | Software | 0 0
raw download clone embed print report
  1. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-59-generic] (local build)
  2. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Blue Mobile (SMR)
  6. Device Model: WDC WD10SPZX-60Z10T1
  7. Serial Number: WD-WXC2A21L9SP1
  8. LU WWN Device Id: 5 0014ee 213df5757
  9. Firmware Version: 05.01A05
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. TRIM Command: Available, deterministic
  15. Device is: In smartctl database 7.3/5528
  16. ATA Version is: ACS-3 T13/2161-D revision 5
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Mon Jun 2 13:05:17 2025 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x00) Offline data collection activity
  27. was never started.
  28. Auto Offline Data Collection: Disabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: (10560) seconds.
  34. Offline data collection
  35. capabilities: (0x5b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. No Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 2) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 188) minutes.
  52. SCT capabilities: (0x303d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 32
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 682
  61. 3 Spin_Up_Time 0x0027 055 053 021 Pre-fail Always - 1425
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6822
  63. 5 Reallocated_Sector_Ct 0x0033 061 061 010 Pre-fail Always - 33248 (0 1)
  64. 7 Seek_Error_Rate 0x002f 100 100 030 Pre-fail Always - 30132
  65. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8345
  66. 10 Spin_Retry_Count 0x0033 100 100 050 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2050
  68. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 174266
  69. 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0
  70. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 689
  71. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 5048
  72. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  73. 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 14717
  74. 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 957777707231
  75. 193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 17072
  76. 194 Temperature_Celsius 0x0022 034 058 000 Old_age Always - 34 (Min/Max 33/36)
  77. 197 Current_Pending_Sector 0x0032 100 099 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 505
  80. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  81. 240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 738049
  82. 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 23935350
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 138 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 138 occurred at disk power-on lifetime: 7990 hours (332 days + 22 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 04 51 00 00 00 00 a0
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. ea 00 00 00 00 00 a0 08 04:04:23.862 FLUSH CACHE EXT
  112. ea 00 00 00 00 00 a0 08 04:04:21.389 FLUSH CACHE EXT
  113.  
  114. Error 137 occurred at disk power-on lifetime: 7989 hours (332 days + 21 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 04 51 00 00 00 00 a0
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. ea 00 00 00 00 00 a0 08 03:13:20.845 FLUSH CACHE EXT
  126.  
  127. Error 136 occurred at disk power-on lifetime: 7989 hours (332 days + 21 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 04 51 00 00 00 00 a0
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. ea 00 00 00 00 00 a0 08 03:13:12.334 FLUSH CACHE EXT
  139. ea 00 00 00 00 00 a0 08 03:13:12.333 FLUSH CACHE EXT
  140. ea 00 00 00 00 00 a0 08 03:13:10.444 FLUSH CACHE EXT
  141.  
  142. Error 135 occurred at disk power-on lifetime: 7323 hours (305 days + 3 hours)
  143. When the command that caused the error occurred, the device was active or idle.
  144.  
  145. After command completion occurred, registers were:
  146. ER ST SC SN CL CH DH
  147. -- -- -- -- -- -- --
  148. 04 51 00 00 00 00 a0
  149.  
  150. Commands leading to the command that caused the error were:
  151. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  152. -- -- -- -- -- -- -- -- ---------------- --------------------
  153. ea 00 00 00 00 00 a0 08 8d+07:17:25.229 FLUSH CACHE EXT
  154. ea 00 00 00 00 00 a0 08 8d+07:16:57.849 FLUSH CACHE EXT
  155.  
  156. Error 134 occurred at disk power-on lifetime: 6932 hours (288 days + 20 hours)
  157. When the command that caused the error occurred, the device was active or idle.
  158.  
  159. After command completion occurred, registers were:
  160. ER ST SC SN CL CH DH
  161. -- -- -- -- -- -- --
  162. 04 51 00 00 00 00 a0
  163.  
  164. Commands leading to the command that caused the error were:
  165. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  166. -- -- -- -- -- -- -- -- ---------------- --------------------
  167. ea 00 00 00 00 00 a0 08 03:00:27.348 FLUSH CACHE EXT
  168. ef 10 03 00 00 00 a0 08 03:00:27.348 SET FEATURES [Enable SATA feature]
  169. ef 10 02 00 00 00 a0 08 03:00:27.348 SET FEATURES [Enable SATA feature]
  170. ec 00 00 00 00 00 a0 08 03:00:27.347 IDENTIFY DEVICE
  171.  
  172. SMART Self-test log structure revision number 1
  173. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  174.  
  175. SMART Selective self-test log data structure revision number 1
  176. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  177. 1 0 0 Not_testing
  178. 2 0 0 Not_testing
  179. 3 0 0 Not_testing
  180. 4 0 0 Not_testing
  181. 5 0 0 Not_testing
  182. Selective self-test flags (0x0):
  183. After scanning selected spans, do NOT read-scan remainder of disk.
  184. If Selective self-test is pending on power-up, resume after 0 minute delay.
  185.  
  186. The above only provides legacy SMART information - try 'smartctl -x' for more
  187.  
  188.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!