Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- FortiAP-221B (Jan 22 2013 - 19:04:10)
- Ver:04000003
- Serial number: FP221B3X13018295
- Region code: E
- DRAM: 64 MB
- id read 0x100000ff
- flash size =16 M, sector count = 256
- Flash: 16 MB
- Using default environment
- BOARD IS NOT CALIBRATED!!!
- In: serial
- Out: serial
- Err: serial
- Net: ag934x_enet_initialize...
- ether board
- mac=ffffffffffff
- mac=085b0e10fbd2
- No valid address in Flash. Using fixed address
- eth0: 00:03:7f:09:0b:ad
- eth0 up
- eth0
- Hit any key to stop autoboot: 4
- [G]: Get OS image from TFTP server.
- [Q]: Quit menu and continue to boot with default OS.
- [H]: Display this list of options.
- Enter G,Q,or H:
- Please connect TFTP server to Ethernet port 'eth1'.
- Enter TFTP server address [192.168.1.10]: 192.168.1.200
- Enter local address [192.168.1.1]: 192.168.1.50
- Enter firmware image file name [image.out]:
- dup 1 speed 1000
- Using eth0 device
- TFTP from server 192.168.1.200; our IP address is 192.168.1.50
- Filename 'image.out'.
- Load address: 0x80060000
- Loading: *T #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ########################
- done
- Bytes transferred = 5447383 (531ed7 hex)
- CRC32 for 80060000 ... 80591ed6 ==> 169a419a
- unzipped : 11671331(0x00b21723)
- Save as Default firmware[D]?d
- d
- Programming the boot device now.
- First 0x4 last 0xb6 sector size 0x10000
- 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182
- Erased 179 sectors
- Copy to Flash... write addr: 9f040000
- done
- 0
- ## Booting image at 9f940000 ...
- Image Name: MIPS OpenWrt Linux-5.10.146
- Created: 2022-10-14 22:44:41 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 2234083 Bytes = 2.1 MB
- Load Address: 80060000
- Entry Point: 80060000
- Verifying Checksum at 0x9f940040 ...OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Linux version 5.10.146 (stereo@oberon) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:41 2022
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] MIPS: machine is Fortinet FAP221B
- [ 0.000000] SoC: Atheros AR9344 rev 2
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: console=ttyS0,9600n8 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 56188K/65536K available (5462K kernel code, 602K rwdata, 1196K rodata, 1180K init, 200K bss, 9348K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 51
- [ 0.000000] CPU clock: 560.000 MHz
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
- [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
- [ 0.092489] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
- [ 0.237110] pid_max: default: 32768 minimum: 301
- [ 0.292345] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.379481] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.474039] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.568396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.685676] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.766736] pinctrl core: initialized pinctrl subsystem
- [ 0.830593] NET: Registered protocol family 16
- [ 0.944777] clocksource: Switched to clocksource MIPS
- [ 1.006170] NET: Registered protocol family 2
- [ 1.058378] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 1.145269] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 1.245000] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 1.336371] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 1.420433] TCP: Hash tables configured (established 1024 bind 1024)
- [ 1.496354] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 1.574232] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 1.657550] NET: Registered protocol family 1
- [ 1.709550] PCI: CLS 0 bytes, default 32
- [ 1.762647] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 1.844101] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.913657] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.034162] pinctrl-single 1804002c.pinmux: 544 pins, size 68
- [ 2.103628] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 2.180142] printk: console [ttyS0] disabled
- [ 2.231114] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
- [ 2.333897] printk: console [ttyS0] enabled
- [ 2.333897] printk: console [ttyS0] enabled
- [ 2.434096] printk: bootconsole [early0] disabled
- [ 2.434096] printk: bootconsole [early0] disabled
- [ 2.557945] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
- [ 2.619675] 4 fixed-partitions partitions found on MTD device spi0.0
- [ 2.695959] Creating 4 MTD partitions on "spi0.0":
- [ 2.753428] 0x000000000000-0x000000040000 : "u-boot"
- [ 2.816916] 0x000000040000-0x000000940000 : "rootfs"
- [ 2.877591] mtd: device 1 (rootfs) set to be root filesystem
- [ 2.946433] 1 squashfs-split partitions found on MTD device rootfs
- [ 3.020636] 0x000000350000-0x000000940000 : "rootfs_data"
- [ 3.087180] 0x000000940000-0x000000ff0000 : "kernel"
- [ 3.147793] 0x000000ff0000-0x000001000000 : "art"
- [ 3.214670] ag71xx 19000000.eth: invalid MAC address, using random address
- [ 3.715343] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd072, driver=Qualcomm Atheros AR8035]
- [ 3.835132] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
- [ 3.909522] i2c /dev entries driver
- [ 3.953825] NET: Registered protocol family 10
- [ 4.015236] Segment Routing with IPv6
- [ 4.059370] NET: Registered protocol family 17
- [ 4.112816] 8021q: 802.1Q VLAN Support v1.8
- [ 4.164104] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
- [ 4.237331] MEM 0x0000000010000000..0x0000000013ffffff
- [ 4.299974] IO 0x0000000000000000..0x0000000000000000
- [ 4.362874] PCI host bridge to bus 0000:00
- [ 4.412035] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
- [ 4.494524] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 4.561393] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 4.642864] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 4.737956] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
- [ 4.810022] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
- [ 4.891505] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 4.971964] pci 0000:00:00.0: supports D1
- [ 5.019984] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 5.090149] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 5.169521] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
- [ 5.257234] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
- [ 5.373044] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 5.555780] VFS: Mounted root (jffs2 filesystem) readonly on device 31:1.
- [ 5.642306] Freeing unused kernel memory: 1180K
- [ 5.696625] This architecture does not have kernel memory protection.
- [ 5.773912] Run /sbin/init as init process
- [ 5.823264] Run /etc/init as init process
- [ 5.871604] Run /bin/init as init process
- [ 5.919874] Run /bin/sh as init process
- [ 5.966075] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
- [ 6.136196] Rebooting in 1 seconds..
- FortiAP-221B (Jan 22 2013 - 19:04:10)
- Ver:04000003
- Serial number: FP221B3X13018295
- Region code: E
- DRAM: 64 MB
- id read 0x100000ff
- flash size =16 M, sector count = 256
- Flash: 16 MB
- Using default environment
- BOARD IS NOT CALIBRATED!!!
- In: serial
- Out: serial
- Err: serial
- Net: ag934x_enet_initialize...
- ether board
- mac=ffffffffffff
- mac=085b0e10fbd2
- No valid address in Flash. Using fixed address
- eth0: 00:03:7f:09:0b:ad
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement