API tools faq
paste
nwetter

Untitled

nwetter
Jun 14th, 2022
12
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.07 KB | None | 0 0
raw download clone embed print report
  1. debian@nitrogen:~$ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.9.88-g424d4ac6d7da-dirty (nate@nate-HP-EliteBook-840-G3) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) ) #28 SMP PREEMPT Tue Jun 23 16:18:39 CDT 2020
  4. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt:Machine model: PhotoniCare Clearview - SPI J15
  7. [ 0.000000] Reserved memory: created CMA memory pool at 0x62000000, size 320 MiB
  8. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [ 0.000000] Memory policy: Data cache writealloc
  10. [ 0.000000] On node 0 totalpages: 983039
  11. [ 0.000000] free_area_init_node: node 0, pgdat 80e5d9c0, node_mem_map cfe40000
  12. [ 0.000000] Normal zone: 3690 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 419840 pages, LIFO batch:31
  15. [ 0.000000] HighMem zone: 563199 pages, LIFO batch:31
  16. [ 0.000000] percpu: Embedded 14 pages/cpu @e66f8000 s26188 r8192 d22964 u57344
  17. [ 0.000000] pcpu-alloc: s26188 r8192 d22964 u57344 alloc=14*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979349
  20. [ 0.000000] Kernel command line: console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait fixrtc cpu=6Q board=nitrogen6_max mxc_hdmi.only_cea=1 root=/dev/mmcblk0p1 wlan.mac=00:19:b8:8a:0f:5d wlcore.mac=00:19:b8:8a:0f:5d splash plymouth.ignore-serial-consoles loglevel=4 reset_cause=0x1
  21. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Memory: 3546648K/3932156K available (9216K kernel code, 378K rwdata, 2120K rodata, 1024K init, 468K bss, 57828K reserved, 327680K cma-reserved, 2252796K highmem)
  25. [ 0.000000] Virtual kernel memory layout:
  26. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  28. vmalloc : 0xe7000000 - 0xff800000 ( 392 MB)
  29. lowmem : 0x80000000 - 0xe6800000 (1640 MB)
  30. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  31. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  32. .text : 0x80008000 - 0x80a00000 (10208 kB)
  33. .init : 0x80d00000 - 0x80e00000 (1024 kB)
  34. .data : 0x80e00000 - 0x80e5ea80 ( 379 kB)
  35. .bss : 0x80e60000 - 0x80ed5388 ( 469 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  37. [ 0.000000] Preemptible hierarchical RCU implementation.
  38. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  39. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  40. [ 0.000000] L2C-310 errata 752271 769419 enabled
  41. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  42. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  43. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  44. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  45. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  46. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  47. [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0
  48. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  49. [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  50. [ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  51. [ 0.001636] Console: colour dummy device 80x30
  52. [ 0.001657] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  53. [ 0.001670] pid_max: default: 32768 minimum: 301
  54. [ 0.001786] Security Framework initialized
  55. [ 0.001793] Yama: becoming mindful.
  56. [ 0.001829] AppArmor: AppArmor initialized
  57. [ 0.001872] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
  58. [ 0.001881] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
  59. [ 0.002687] CPU: Testing write buffer coherency: ok
  60. [ 0.003126] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  61. [ 0.003209] Setting up static identity map for 0x10100000 - 0x10100058
  62. [ 0.169841] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  63. [ 0.239837] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  64. [ 0.309834] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  65. [ 0.309954] Brought up 4 CPUs
  66. [ 0.309966] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  67. [ 0.309972] CPU: All CPU(s) started in SVC mode.
  68. [ 0.311035] devtmpfs: initialized
  69. [ 0.327113] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  70. [ 0.327482] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  71. [ 0.327502] futex hash table entries: 1024 (order: 4, 65536 bytes)
  72. [ 0.346997] pinctrl core: initialized pinctrl subsystem
  73. [ 0.348453] NET: Registered protocol family 16
  74. [ 0.359377] DMA: preallocated 256 KiB pool for atomic coherent allocations
  75. [ 0.389547] cpuidle: using governor menu
  76. [ 0.389919] CPU identified as i.MX6Q, silicon rev 1.2
  77. [ 0.410661] irq: no irq domain found for /soc/aips-bus@02000000/gpio@0209c000 !
  78. [ 0.422184] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  79. [ 0.422193] hw-breakpoint: maximum watchpoint size is 4 bytes.
  80. [ 0.423949] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  81. [ 0.426946] imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
  82. [ 0.427090] imx-gpc 20dc000.gpc: Registered imx-gpc
  83. [ 0.477328] mxs-dma 110000.dma-apbh: initialized
  84. [ 0.479762] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_NANDF_CS2 already requested by 20e0000.iomuxc; cannot claim for regulators:regulator@4
  85. [ 0.479779] imx6q-pinctrl 20e0000.iomuxc: pin-187 (regulators:regulator@4) status -22
  86. [ 0.479795] imx6q-pinctrl 20e0000.iomuxc: could not request pin 187 (MX6Q_PAD_NANDF_CS2) from group reg-wlan-engrp on device 20e0000.iomuxc
  87. [ 0.479807] reg-fixed-voltage regulators:regulator@4: Error applying setting, reverse things back
  88. [ 0.479830] reg-fixed-voltage: probe of regulators:regulator@4 failed with error -22
  89. [ 0.480700] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 29, base_baud = 5000000) is a IMX
  90. [ 0.481642] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 76, base_baud = 5000000) is a IMX
  91. [ 0.518545] console [ttymxc1] enabled
  92. [ 0.519211] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX
  93. [ 0.519844] serial_imx_probe_dt:170
  94. [ 0.519886] serial_imx_probe_dt:167
  95. [ 0.519918] serial_imx_probe_dt:56
  96. [ 0.519952] serial_imx_probe_dt:168
  97. [ 0.520208] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX
  98. [ 0.521525] SCSI subsystem initialized
  99. [ 0.521784] libata version 3.00 loaded.
  100. [ 0.522093] usbcore: registered new interface driver usbfs
  101. [ 0.522170] usbcore: registered new interface driver hub
  102. [ 0.522277] usbcore: registered new device driver usb
  103. [ 0.522512] 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
  104. [ 0.522670] 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
  105. [ 0.523495] imx-i2c 21a0000.i2c: stop-delay=0, inter-byte-delay=0
  106. [ 0.524020] i2c i2c-0: IMX I2C adapter registered
  107. [ 0.524037] i2c i2c-0: can't use DMA, using PIO instead.
  108. [ 0.524501] imx-i2c 21a4000.i2c: stop-delay=0, inter-byte-delay=0
  109. [ 0.524904] i2c i2c-1: IMX I2C adapter registered
  110. [ 0.524919] i2c i2c-1: can't use DMA, using PIO instead.
  111. [ 0.525279] imx-i2c 21a8000.i2c: stop-delay=0, inter-byte-delay=0
  112. [ 0.525790] i2c i2c-2: IMX I2C adapter registered
  113. [ 0.525807] i2c i2c-2: can't use DMA, using PIO instead.
  114. [ 0.526755] i2c i2c-1: Added multiplexed i2c bus 3
  115. [ 0.527171] i2c i2c-1: Added multiplexed i2c bus 4
  116. [ 0.527185] i2c-mux-gpio i2cmux@2: 2 port mux on 21a4000.i2c adapter
  117. [ 0.527527] i2c i2c-2: Added multiplexed i2c bus 5
  118. [ 0.527539] i2c-mux-gpio i2cmux@3: 1 port mux on 21a8000.i2c adapter
  119. [ 0.527601] Linux video capture interface: v2.00
  120. [ 0.527647] pps_core: LinuxPPS API ver. 1 registered
  121. [ 0.527657] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  122. [ 0.527680] PTP clock support registered
  123. [ 0.549555] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  124. [ 0.579553] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  125. [ 0.581209] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
  126. [ 0.581223] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
  127. [ 0.581332] MIPI CSI2 driver module loaded
  128. [ 0.581797] imx rpmsg driver is registered.
  129. [ 0.582001] Advanced Linux Sound Architecture Driver Initialized.
  130. [ 0.583374] Bluetooth: Core ver 2.22
  131. [ 0.583426] NET: Registered protocol family 31
  132. [ 0.583434] Bluetooth: HCI device and connection manager initialized
  133. [ 0.583452] Bluetooth: HCI socket layer initialized
  134. [ 0.583467] Bluetooth: L2CAP socket layer initialized
  135. [ 0.583513] Bluetooth: SCO socket layer initialized
  136. [ 0.583536] NetLabel: Initializing
  137. [ 0.583542] NetLabel: domain hash size = 128
  138. [ 0.583547] NetLabel: protocols = UNLABELED CIPSOv4
  139. [ 0.583616] NetLabel: unlabeled traffic allowed by default
  140. [ 0.584391] clocksource: Switched to clocksource mxc_timer1
  141. [ 0.584584] VFS: Disk quotas dquot_6.6.0
  142. [ 0.584670] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  143. [ 0.585044] AppArmor: AppArmor Filesystem Enabled
  144. [ 0.598140] NET: Registered protocol family 2
  145. [ 0.598927] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
  146. [ 0.599094] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  147. [ 0.599402] TCP: Hash tables configured (established 16384 bind 16384)
  148. [ 0.599597] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  149. [ 0.599677] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  150. [ 0.599967] NET: Registered protocol family 1
  151. [ 0.600584] RPC: Registered named UNIX socket transport module.
  152. [ 0.600591] RPC: Registered udp transport module.
  153. [ 0.600596] RPC: Registered tcp transport module.
  154. [ 0.600601] RPC: Registered tcp NFSv4.1 backchannel transport module.
  155. [ 0.600617] PCI: CLS 0 bytes, default 64
  156. [ 0.600936] Trying to unpack rootfs image as initramfs...
  157. [ 1.078246] Freeing initrd memory: 6424K
  158. [ 1.079032] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  159. [ 1.081435] Bus freq driver module loaded
  160. [ 1.082735] audit: initializing netlink subsys (disabled)
  161. [ 1.082817] audit: type=2000 audit(1.070:1): initialized
  162. [ 1.084012] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  163. [ 1.092503] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  164. [ 1.094236] NFS: Registering the id_resolver key type
  165. [ 1.094272] Key type id_resolver registered
  166. [ 1.094279] Key type id_legacy registered
  167. [ 1.094637] fuse init (API version 7.26)
  168. [ 1.102057] bounce: pool size: 64 pages
  169. [ 1.102071] io scheduler noop registered
  170. [ 1.102081] io scheduler deadline registered
  171. [ 1.102286] io scheduler cfq registered (default)
  172. [ 1.105288] imx6_pcie_probe: reset gp 191
  173. [ 1.105559] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
  174. [ 1.105575] OF: PCI: No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
  175. [ 1.105611] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000
  176. [ 1.105634] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000
  177. [ 1.160412] imx6q-pcie 1ffc000.pcie: Link up, Gen1
  178. [ 1.160653] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
  179. [ 1.160671] pci_bus 0000:00: root bus resource [bus 00-ff]
  180. [ 1.160683] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  181. [ 1.160695] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
  182. [ 1.160742] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
  183. [ 1.160781] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  184. [ 1.160808] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  185. [ 1.160904] pci 0000:00:00.0: supports D1
  186. [ 1.160916] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
  187. [ 1.161252] PCI: bus0: Fast back to back transfers disabled
  188. [ 1.161495] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330
  189. [ 1.161612] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
  190. [ 1.162122] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  191. [ 1.184522] PCI: bus1: Fast back to back transfers disabled
  192. [ 1.184741] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
  193. [ 1.184763] pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x011fffff]
  194. [ 1.184779] pci 0000:00:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref]
  195. [ 1.184796] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x01101fff 64bit]
  196. [ 1.184864] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  197. [ 1.184880] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
  198. [ 1.185235] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  199. [ 1.185246] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  200. [ 1.185260] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
  201. [ 1.185443] aer 0000:00:00.0:pcie002: service driver aer loaded
  202. [ 1.185654] pci 0000:01:00.0: enabling device (0140 -> 0142)
  203. [ 1.187334] backlight_lvds supply power not found, using dummy regulator
  204. [ 1.189815] backlight_lvds2 supply power not found, using dummy regulator
  205. [ 1.194481] 20e0000.hdmi_video supply HDMI not found, using dummy regulator
  206. [ 1.195419] mxc_sdc_fb fb@0: registered mxc display driver ldb
  207. [ 1.215090] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  208. [ 1.215247] imx-ipuv3 2400000.ipu: use special clk parent
  209. [ 1.244434] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  210. [ 1.244447] find_field: [0] = 0x7ff, max=23
  211. [ 1.244454] find_field: [1] = 0xfff, max=23
  212. [ 1.244459] find_field: [2] = 0x17ff, max=23
  213. [ 1.244464] find_field: [0] = 0x820, max=29
  214. [ 1.244513] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  215. [ 1.277967] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  216. [ 1.278100] imx-ipuv3 2400000.ipu: use special clk parent
  217. [ 1.304435] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  218. [ 1.321598] Console: switching to colour frame buffer device 128x48
  219. [ 1.362939] add tfp410 i2c driver
  220. [ 1.366844] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  221. [ 1.367487] imx-sdma 20ec000.sdma: loaded firmware 3.3
  222. [ 1.373995] imx sema4 driver is registered.
  223. [ 1.374057] [drm] Initialized
  224. [ 1.374702] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  225. [ 1.388788] brd: module loaded
  226. [ 1.397785] loop: module loaded
  227. [ 1.397920] [max77823_init] start
  228. [ 1.399374] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
  229. [ 1.399387] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
  230. [ 1.399398] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
  231. [ 1.399409] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  232. [ 1.403048] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  233. [ 1.403084] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  234. [ 1.403101] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  235. [ 1.404909] scsi host0: ahci-imx
  236. [ 1.405304] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 85
  237. [ 1.408674] m25p80 spi0.0: found gd25q16, expected sst25vf016b
  238. [ 1.410487] m25p80 spi0.0: gd25q16 (2048 Kbytes)
  239. [ 1.410534] 3 ofpart partitions found on MTD device spi0.0
  240. [ 1.410541] Creating 3 MTD partitions on "spi0.0":
  241. [ 1.410553] 0x000000000000-0x0000000c0000 : "U-Boot"
  242. [ 1.412030] 0x0000000c0000-0x0000000c2000 : "env"
  243. [ 1.413306] 0x0000000c2000-0x000000200000 : "splash"
  244. [ 1.414646] spi_imx 2008000.ecspi: probed
  245. [ 1.415965] spi_imx 200c000.ecspi: probed
  246. [ 1.417008] libphy: Fixed MDIO Bus: probed
  247. [ 1.417452] CAN device driver interface
  248. [ 1.417817] 2090000.flexcan supply xceiver not found, using dummy regulator
  249. [ 1.418808] flexcan 2090000.flexcan: device registered (reg_base=e7324000, irq=37)
  250. [ 1.420404] 2188000.ethernet supply phy not found, using dummy regulator
  251. [ 1.421015] pps pps0: new PPS source ptp0
  252. [ 1.422702] libphy: fec_enet_mii_bus: probed
  253. [ 1.441206] fec 2188000.ethernet eth0: registered PHC device 0
  254. [ 1.441633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  255. [ 1.441642] ehci-pci: EHCI PCI platform driver
  256. [ 1.441814] usbcore: registered new interface driver cdc_acm
  257. [ 1.441821] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  258. [ 1.441910] usbcore: registered new interface driver usb-storage
  259. [ 1.442043] usbcore: registered new interface driver usbserial
  260. [ 1.442090] usbcore: registered new interface driver usbserial_generic
  261. [ 1.442137] usbserial: USB Serial support registered for generic
  262. [ 1.442183] usbcore: registered new interface driver cp210x
  263. [ 1.442227] usbserial: USB Serial support registered for cp210x
  264. [ 1.442270] usbcore: registered new interface driver ftdi_sio
  265. [ 1.442314] usbserial: USB Serial support registered for FTDI USB Serial Device
  266. [ 1.442358] usbcore: registered new interface driver keyspan
  267. [ 1.442409] usbserial: USB Serial support registered for Keyspan - (without firmware)
  268. [ 1.442460] usbserial: USB Serial support registered for Keyspan 1 port adapter
  269. [ 1.442503] usbserial: USB Serial support registered for Keyspan 2 port adapter
  270. [ 1.442547] usbserial: USB Serial support registered for Keyspan 4 port adapter
  271. [ 1.442592] usbcore: registered new interface driver pl2303
  272. [ 1.442634] usbserial: USB Serial support registered for pl2303
  273. [ 1.442679] usbcore: registered new interface driver qcserial
  274. [ 1.442724] usbserial: USB Serial support registered for Qualcomm USB modem
  275. [ 1.444562] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  276. [ 1.445617] setup_reset_gpios:-2, flags 0
  277. [ 1.449331] ci_hdrc ci_hdrc.0: EHCI Host Controller
  278. [ 1.449364] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
  279. [ 1.474425] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  280. [ 1.475488] hub 1-0:1.0: USB hub found
  281. [ 1.475540] hub 1-0:1.0: 1 port detected
  282. [ 1.476460] setup_reset_gpios:204, flags 1
  283. [ 1.504454] setup_reset_gpios:-2, flags 1
  284. [ 1.507956] ci_hdrc ci_hdrc.1: EHCI Host Controller
  285. [ 1.507986] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
  286. [ 1.534417] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  287. [ 1.535360] hub 2-0:1.0: USB hub found
  288. [ 1.535407] hub 2-0:1.0: 1 port detected
  289. [ 1.536662] mousedev: PS/2 mouse device common for all mice
  290. [ 1.549232] rtc-m41t80 0-0068: rtc core: registered rv4162 as rtc0
  291. [ 1.553460] check_alarm_past: alarm in the past
  292. [ 1.553707] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
  293. [ 1.553902] i2c /dev entries driver
  294. [ 1.555868] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
  295. [ 1.556056] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
  296. [ 1.558259] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  297. [ 1.559041] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  298. [ 1.559879] sdhci: Secure Digital Host Controller Interface driver
  299. [ 1.559886] sdhci: Copyright(c) Pierre Ossman
  300. [ 1.559891] sdhci-pltfm: SDHCI platform and OF driver helper
  301. [ 1.561993] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  302. [ 1.562047] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
  303. [ 1.624663] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  304. [ 1.631498] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode
  305. [ 1.704427] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
  306. [ 1.716517] mxc_vpu 2040000.vpu_fsl: VPU initialized
  307. [ 1.717227] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  308. [ 1.717798] mxc_hdmi_cec soc:hdmi_cec@00120000: HDMI CEC initialized
  309. [ 1.719281] caam 2100000.caam: ERA source: CAAMVID.
  310. [ 1.719333] caam 2100000.caam: AXI pipeline throttling enabled.
  311. [ 1.720608] caam 2100000.caam: Entropy delay = 3200
  312. [ 1.734625] ata1: SATA link down (SStatus 0 SControl 300)
  313. [ 1.734667] ahci-imx 2200000.sata: no device found, disabling link.
  314. [ 1.734676] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  315. [ 1.781404] caam 2100000.caam: Instantiated RNG4 SH0
  316. [ 1.829164] mmc1: new DDR MMC card at address 0001
  317. [ 1.829939] mmcblk1: mmc1:0001 M62704 3.53 GiB
  318. [ 1.830323] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
  319. [ 1.830683] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
  320. [ 1.831033] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB
  321. [ 1.842167] caam 2100000.caam: Instantiated RNG4 SH1
  322. [ 1.842186] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
  323. [ 1.842196] caam 2100000.caam: job rings = 2, qi = 0
  324. [ 1.850486] caam algorithms registered in /proc/crypto
  325. [ 1.854660] caam_jr 2101000.jr0: registering rng-caam
  326. [ 1.855899] usbcore: registered new interface driver usbhid
  327. [ 1.855906] usbhid: USB HID core driver
  328. [ 1.858570] sgtl5000 0-000a: sgtl5000 revision 0x11
  329. [ 1.860364] random: fast init done
  330. [ 1.861226] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
  331. [ 1.891529] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
  332. [ 1.904451] usb 2-1: new high-speed USB device number 2 using ci_hdrc
  333. [ 1.906194] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
  334. [ 1.908135] NET: Registered protocol family 26
  335. [ 1.908811] NET: Registered protocol family 10
  336. [ 1.910143] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  337. [ 1.910932] NET: Registered protocol family 17
  338. [ 1.910953] can: controller area network core (rev 20120528 abi 9)
  339. [ 1.911195] NET: Registered protocol family 29
  340. [ 1.911242] can: raw protocol (rev 20120528)
  341. [ 1.911251] can: broadcast manager protocol (rev 20161123 t)
  342. [ 1.911266] can: netlink gateway (rev 20130117) max_hops=1
  343. [ 1.911582] Bluetooth: RFCOMM TTY layer initialized
  344. [ 1.911604] Bluetooth: RFCOMM socket layer initialized
  345. [ 1.911637] Bluetooth: RFCOMM ver 1.11
  346. [ 1.911656] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  347. [ 1.911664] Bluetooth: BNEP filters: protocol multicast
  348. [ 1.911679] Bluetooth: BNEP socket layer initialized
  349. [ 1.911749] 8021q: 802.1Q VLAN Support v1.8
  350. [ 1.912217] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_NANDF_CS3 already requested by 20e0000.iomuxc; cannot claim for bt_rfkill
  351. [ 1.922546] imx6q-pinctrl 20e0000.iomuxc: pin-188 (bt_rfkill) status -22
  352. [ 1.928026] imx6q-pinctrl 20e0000.iomuxc: could not request pin 188 (MX6Q_PAD_NANDF_CS3) from group bt-rfkillgrp on device 20e0000.iomuxc
  353. [ 1.939191] rfkill_gpio bt_rfkill: Error applying setting, reverse things back
  354. [ 1.945153] rfkill_gpio: probe of bt_rfkill failed with error -22
  355. [ 1.945289] Key type dns_resolver registered
  356. [ 1.947980] cpu cpu0: Registered imx6q-cpufreq
  357. [ 1.948021] Registering SWP/SWPB emulation handler
  358. [ 1.949156] AppArmor: AppArmor sha1 policy hashing enabled
  359. [ 1.964506] imx_thermal 2000000.aips-bus:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C
  360. [ 1.968446] rtc-m41t80 0-0068: setting system clock to 2022-06-14 23:42:37 UTC (1655250157)
  361. [ 1.969402] ALSA device list:
  362. [ 1.969410] #0: sgtl5000-audio
  363. [ 1.972378] Freeing unused kernel memory: 1024K
  364. [ 2.095748] hub 2-1:1.0: USB hub found
  365. [ 2.095937] hub 2-1:1.0: 3 ports detected
  366. [ 2.284880] mmc0: host does not support reading read-only switch, assuming write-enable
  367. [ 2.290956] mmc0: new high speed SDHC card at address 0001
  368. [ 2.291821] mmcblk0: mmc0:0001 0016G 15.2 GiB
  369. [ 2.295012] mmcblk0: p1 p2 p3 p4 < p5 p6 >
  370. [ 2.414502] usb 2-1.1: new full-speed USB device number 3 using ci_hdrc
  371. [ 2.694455] usb 2-1.2: new high-speed USB device number 4 using ci_hdrc
  372. [ 2.799077] xhci_hcd 0000:01:00.0: Direct firmware load for uPD72020x.mem failed with error -2
  373. [ 2.799096] xhci_hcd 0000:01:00.0: firmware request for uPD72020x.mem failed (-2).
  374. [ 2.806168] xhci_hcd: probe of 0000:01:00.0 failed with error -2
  375. [ 3.538105] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  376. [ 4.484712] ip_tables: (C) 2000-2006 Netfilter Core Team
  377. [ 4.532901] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  378. [ 4.534215] systemd[1]: Detected architecture arm.
  379. [ 4.534590] systemd[1]: Running with unpopulated /etc.
  380. [ 4.575409] systemd[1]: Set hostname to <nitrogen>.
  381. [ 4.585199] systemd[1]: Initializing machine ID from D-Bus machine ID.
  382. [ 4.616327] systemd[1]: Configuration file /etc/systemd/system/mount_flash_drive.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  383. [ 5.120565] systemd[1]: Populated /etc with preset unit settings.
  384. [ 5.196700] systemd-fstab-generator[305]: Checking was requested for "/media/root-ro/", but it is not a device.
  385. [ 5.415937] systemd[1]: NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service is masked.
  386. [ 5.416143] systemd[1]: ModemManager.service: Cannot add dependency job, ignoring: Unit ModemManager.service is masked.
  387. [ 5.416525] systemd[1]: lm-sensors.service: Cannot add dependency job, ignoring: Unit lm-sensors.service is masked.
  388. [ 6.261038] ip6_tables: (C) 2000-2006 Netfilter Core Team
  389. [ 7.099880] systemd-journald[339]: Received request to flush runtime journal from PID 1
  390. [ 7.817939] input: gpio-keys as /devices/soc0/gpio-keys/input/input1
  391. [ 7.990754] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
  392. [ 8.038138] fb_st7789v: module is from the staging directory, the quality is unknown, you have been warned.
  393. [ 8.039106] fbtft_of_value: width = 240
  394. [ 8.039115] fbtft_of_value: height = 204
  395. [ 8.039121] fbtft_of_value: regwidth = 8
  396. [ 8.039127] fbtft_of_value: buswidth = 9
  397. [ 8.039134] fbtft_of_value: bpp = 16
  398. [ 8.039141] fbtft_of_value: rotate = 0
  399. [ 8.039148] fbtft_of_value: display_fps = 40
  400. [ 8.039154] fbtft_of_value: te-line = 320
  401. [ 8.039160] fbtft_of_value: txbuflen = 27648
  402. [ 8.039166] fbtft_of_value: txbufcnt = 4
  403. [ 8.109308] ft5x06-ts 3-0038: reset fffffffe
  404. [ 8.109750] ft5x06-ts 3-0038: Could not detect touch screen -19.
  405. [ 8.149998] galcore: loading out-of-tree module taints kernel.
  406. [ 8.176102] Galcore version 6.2.2.93313
  407. [ 8.210695] tc358743_mipi 4-000f: no sensor pwdn pin available
  408. [ 8.210848] get_pixelformat: YUV 4:2:2 8-bit (56595559, 1e)
  409. [ 8.210861] tc358743_probe: format: 56595559, capture mode: 0 fps: 60 width: 640 height: 480
  410. [ 8.211518] 4-000f supply DGPO not found, using dummy regulator
  411. [ 8.211724] power_control: 1
  412. [ 8.211733] tc_standby: powerdown=0, power_gp=0xfffffffe
  413. [ 8.308091] graphics fb2: created sysfs entry for reading scanline
  414. [ 8.308120] graphics fb2: fb_st7789v frame buffer, 240x204, 95 KiB video memory, 4x27 KiB DMA buffer(s), fps=20, spi1.0 at 40 MHz
  415. [ 8.315031] ov5640_read_reg:write reg error:reg=300a
  416. [ 8.315072] camera ov5640 is not found
  417. [ 8.345074] tc358743_read_reg:reg=0 ret=-6
  418. [ 8.345088] tc358743_probe:cannot find camera
  419. [ 8.345097] power_control: 0
  420. [ 8.345104] tc_standby: powerdown=1, power_gp=0xfffffffe
  421. [ 8.375592] tc358743_probe: failed, error=-19
  422. [ 8.420087] tsc2004 2-0048: no vio regulator found
  423. [ 8.420597] tsc2004 2-0048: tsc2004_cmd: failed, command: 1 i2c error: -6
  424. [ 8.433203] tsc2004 2-0048: Device not present: -6
  425. [ 8.486342] input: eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00 as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.0/0003:0EEF:C000.0001/input/input3
  426. [ 8.493733] hid-multitouch 0003:0EEF:C000.0001: input: USB HID v1.11 Pointer [eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00] on usb-ci_hdrc.1-1.1/input0
  427. [ 8.680140] imx-audio-hdmi sound-hdmi: initialize HDMI-audio failed. load HDMI-video first!
  428. [ 9.187875] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
  429. [ 9.218383] mxc_v4l_open: Mxc Camera no sensor ipu0/csi1
  430. [ 9.230426] mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
  431. [ 9.243579] mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
  432. [ 9.584867] ov5640_read_reg(mipi):reg=300a ret=-6
  433. [ 9.584876] camera ov5640_mipi is not found
  434. [ 9.708648] fsl-hdmi-dai soc:hdmi_audio@00120000: failed to probe. Load HDMI-video first.
  435. [ 9.708672] fsl-hdmi-dai: probe of soc:hdmi_audio@00120000 failed with error -12
  436. [ 10.825218] cgroup: new mount options do not match the existing superblock, will be ignored
  437. [ 11.274491] usb 2-1.2: reset high-speed USB device number 4 using ci_hdrc
  438. [ 11.445608] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  439. [ 11.483334] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  440. [ 11.521100] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  441. [ 11.522758] usbcore: registered new interface driver rt2800usb
  442. [ 11.552434] rt2800usb 2-1.2:1.0 wlx9cefd5fac52f: renamed from wlan0
  443. [ 11.820397] EXT4-fs (mmcblk0p5): recovery complete
  444. [ 11.835628] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  445. [ 12.000429] EXT4-fs (mmcblk0p6): recovery complete
  446. [ 12.013153] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
  447. [ 12.050325] EXT4-fs (mmcblk0p2): recovery complete
  448. [ 12.053323] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  449. [ 12.381703] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  450. [ 13.837179] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  451. [ 13.837390] imx-ipuv3 2400000.ipu: use special clk parent
  452. [ 13.844478] usb 1-1: new high-speed USB device number 2 using ci_hdrc
  453. [ 13.864488] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  454. [ 13.899551] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  455. [ 13.899725] imx-ipuv3 2400000.ipu: use special clk parent
  456. [ 13.924476] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  457. [ 13.958514] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  458. [ 13.958672] imx-ipuv3 2400000.ipu: use special clk parent
  459. [ 13.984461] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  460. [ 14.029304] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  461. [ 14.029504] imx-ipuv3 2400000.ipu: use special clk parent
  462. [ 14.054517] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  463. [ 14.106579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  464. [ 14.205240] Micrel KSZ9021 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:06, irq=116)
  465. [ 14.205446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  466. [ 14.319226] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fac52f: link is not ready
  467. [ 14.319712] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  468. [ 14.323031] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
  469. [ 14.812626] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fac52f: link is not ready
  470. [ 15.277988] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fac52f: link is not ready
  471. [ 16.484949] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
  472. [ 16.484978] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  473. [ 16.989906] mxc_sdc_fb fb@0: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  474. [ 16.990040] imx-ipuv3 2400000.ipu: use special clk parent
  475. [ 17.014521] imx-ipuv3 2400000.ipu: disp=1, pixel_clk=65002000 65000000 parent=65000000 div=1
  476. [ 17.108612] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330
  477. [ 17.108800] pci 0000:01:00.0: reg 0x10: [mem 0x01100000-0x01101fff 64bit]
  478. [ 17.109595] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  479. [ 17.134609] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x01101fff 64bit]
  480. [ 17.135194] xhci_hcd 0000:01:00.0: xHCI Host Controller
  481. [ 17.135236] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
  482. [ 17.160850] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000490
  483. [ 17.175265] hub 3-0:1.0: USB hub found
  484. [ 17.175326] hub 3-0:1.0: 2 ports detected
  485. [ 17.179196] xhci_hcd 0000:01:00.0: xHCI Host Controller
  486. [ 17.179234] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
  487. [ 17.179456] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  488. [ 17.180719] hub 4-0:1.0: USB hub found
  489. [ 17.180831] hub 4-0:1.0: 2 ports detected
  490. [ 18.335147] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
  491. [ 26.566634] capability: warning: `clearview' uses 32-bit capabilities (legacy support in use)
  492. [ 35.772635] random: crng init done
  493. [ 50.654715] CIFS VFS: Error connecting to socket. Aborting operation.
  494. [ 50.655767] CIFS VFS: cifs_mount failed w/return code = -115
  495. [ 168.144982] xhci_hcd 0000:01:00.0: Cannot set link state.
  496. [ 168.145041] usb usb4-port2: cannot disable (err = -32)
  497. [ 168.145064] usb 4-2: USB disconnect, device number 2
  498. [ 168.404548] usb 3-2: new high-speed USB device number 3 using xhci_hcd
  499.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!