Juno uboot log

Cmd>

Cmd> flash

Switching on main power...
PMIC RAM configuration (pms_v103.bin)...
IOFPGA  config: PASSED

Flash> eraseall
Erasing flash device
Erasing Flash
................................................................................
Erasing Flash
....

Flash> exit
Switching off ATX PSU.

Cmd> usb_on
Enabling debug USB...

Cmd> reboot

Powering up system...

Switching on ATXPSU...
PMIC RAM configuration (pms_v103.bin)...
MBtemp   : 39 degC

Configuring motherboard (rev B, var B)...
IOFPGA image \MB\HBI0262B\io_b118.bit
IOFPGA  config: PASSED
OSC CLK config: PASSED

Configuring SCC registers...
Writing SCC 0x00000054 with 0x0007FFFE
Writing SCC 0x0000005C with 0x00FE001E
Writing SCC 0x00000100 with 0x003F1000
Writing SCC 0x00000104 with 0x0001F300
Writing SCC 0x00000108 with 0x00371000
Writing SCC 0x0000010C with 0x0001B300
Writing SCC 0x00000118 with 0x003F1000
Writing SCC 0x0000011C with 0x0001F100
Writing SCC 0x000000F8 with 0x0BEC0000
Writing SCC 0x000000FC with 0xABE40000
Writing SCC 0x0000000C with 0x000000C2
Writing SCC 0x00000010 with 0x000000C2

Peripheral ID0:0x000000AD
Peripheral ID1:0x000000B0
Peripheral ID2:0x0000000B
Peripheral ID3:0x00000000
Peripheral ID4:0x0000000D
Peripheral ID5:0x000000F0
Peripheral ID6:0x00000005
Peripheral ID7:0x000000B1

Programming NOR Flash
Erasing Flash
...
Writing File fip to Flash Address 0x08000000
......
Image: fip UPDATED from \SOFTWARE\fip.bin
Erasing Flash
.
Writing File bl1 to Flash Address 0x0BEC0000

Image: bl1 UPDATED from \SOFTWARE\bl1.bin
Erasing Flash
............................................................
Writing File norkern to Flash Address 0x08500000
................................................................................
......................................................................
Image: norkern UPDATED from \SOFTWARE\Image
Erasing Flash
.
Writing File board.dtb to Flash Address 0x0A700000

Image: board.dtb UPDATED from \SOFTWARE\juno.dtb
Erasing Flash
.........................................
Writing File ramdisk.img to Flash Address 0x09800000
................................................................................
........................
Image: ramdisk.img UPDATED from \SOFTWARE\ramdisk.img
Erasing Flash
.
Writing File hdlcdclk to Flash Address 0x0A5C0000

Image: hdlcdclk UPDATED from \SOFTWARE\hdlcdclk.dat
Erasing Flash
.
Writing File scp_bl1 to Flash Address 0x0BE40000

Image: scp_bl1 UPDATED from \SOFTWARE\scp_bl1.bin
Erasing Flash
.
Writing File startup.nsh to Flash Address 0x0BF00000

Image: startup.nsh UPDATED from \SOFTWARE\startup.nsh
Erasing Flash
....
Writing File BOOTENV to Flash Address 0x0BFC0000
.
Image: BOOTENV UPDATED from \SOFTWARE\blank.img
Erasing Flash
.
Writing File selftest to Flash Address 0x0A600000
..
Image: selftest UPDATED from \SOFTWARE\selftest
PCIE clock configured...

Testing motherboard interfaces (FPGA build 118)...
SRAM 32MB test: PASSED
LAN9118   test: PASSED
KMI1/2    test: PASSED
MMC       test: PASSED
PB/LEDs   test: PASSED
FPGA UART test: PASSED
PCIe init test: PASSED
MAC addrs test: PASSED

SMC MAC address 0002-F700-588D
Setting HDMI0 mode for SVGA.
Setting HDMI1 mode for SVGA.

SoC SMB clock enabled.

Testing SMB clock...
SMB clock running
Releasing system resets...

UART0 set to SoC UART0
UART1 set to SoC UART1

NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.4(release):5ff5a6d9
NOTICE:  BL1: Built : 14:13:19, Feb 20 2018
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v1.4(release):5ff5a6d9
NOTICE:  BL2: Built : 14:13:19, Feb 20 2018
NOTICE:  BL1: Booting BL31
NOTICE:  BL31: v1.4(release):5ff5a6d9
NOTICE:  BL31: Built : 14:13:19, Feb 20 2018


U-Boot 2018.03-rc2-g7b1cfec317 (Feb 20 2018 - 14:12:16 +0000) vexpress_aemv8a, B
uild: jenkins-optee-build-label=docker-xenial-amd64,repo_proj=juno-14

DRAM:  8 GiB
PCIe XR3 Host Bridge enabled: x4 link (Gen 2)
Flash: 64 MiB
*** Warning - bad CRC, using default environment

In:    serial_pl01x
Out:   serial_pl01x
Err:   serial_pl01x
Net:   smc911x-0
Hit any key to stop autoboot:  0
loaded region 0 from 08500000 to 80080000, 00EE3A00 bytes
loaded region 0 from 0A700000 to 83000000, 00005B66 bytes
loaded region 0 from 09800000 to 84000000, 00A303E8 bytes
## Loading init Ramdisk from Legacy Image at 84000000 ...
   Image Name:
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    10683304 Bytes = 10.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   reserving fdt memory region: addr=83000000 size=6000
   Using Device Tree in place at 0000000083000000, end 0000000083008fff

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 4.12.0-g6e954e2f2cbd (buildslave@x86-64-09) (gcc ve
rsion 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Tue Feb 20 14:14:
52 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd030]
[    0.000000] Machine model: ARM Juno development board (r0)
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000fdc00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000009ffffffff
]
[    0.000000] NUMA: Adding memblock [0x80000000 - 0xfedfffff] on node 0
[    0.000000] NUMA: Adding memblock [0x880000000 - 0x9ffffffff] on node 0
[    0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0x9ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x9fffcea80-0x9fffd057f]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000009ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000fedfffff]
[    0.000000]   node   0: [mem 0x0000000880000000-0x00000009ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
[    0.000000] On node 0 totalpages: 2092544
[    0.000000]   DMA zone: 8192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 519680 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 24 pages/cpu @ffff80097ff3b000 s59160 r8192 d309
52 u98304
[    0.000000] pcpu-alloc: s59160 r8192 d30952 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM errata 826319, 827319,
824069
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pag
es: 2059776
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/sda2 rw r
ootwait earlyprintk=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=ju
no loglevel=9
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0xf9c00000-0xfdc00000] (64MB) mapped at [fff
f800079c00000-ffff80007dbfffff]
[    0.000000] Memory: 8129812K/8370176K available (9020K kernel code, 1102K rwd
ata, 4012K rodata, 1088K init, 403K bss, 223980K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 M
B)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 G
B)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008950000   (  9024 K
B)
[    0.000000]     .rodata : 0xffff000008950000 - 0xffff000008d40000   (  4032 K
B)
[    0.000000]       .init : 0xffff000008d40000 - 0xffff000008e50000   (  1088 K
B)
[    0.000000]       .data : 0xffff000008e50000 - 0xffff000008f63a00   (  1103 K
B)
[    0.000000]        .bss : 0xffff000008f63a00 - 0xffff000008fc87b4   (   404 K
B)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 K
B)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 M
B)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 G
B maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e0026000000   (   608 M
B actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800980000000   ( 38912 M
B)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: range[mem 0x2c1c0000-0x2c1c0fff], SPI[224:255]
[    0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000004] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 43980
46511100ns
[    0.000566] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275 ns
[    0.000602] Failed to initialize '/smb@8000000/motherboard/iofpga@3,00000000/
timer@120000': -22
[    0.000816] Console: colour dummy device 80x25
[    0.000875] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 100.00 BogoMIPS (lpj=200000)
[    0.000888] pid_max: default: 32768 minimum: 301
[    0.000984] Security Framework initialized
[    0.003507] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte
s)
[    0.013858] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.018451] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018501] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byte
s)
[    0.032102] ASID allocator initialised with 65536 entries
[    0.049116] EFI services will not be available.
[    0.064159] smp: Bringing up secondary CPUs ...
[    0.107961] CPU features: enabling workaround for ARM erratum 832075
[    0.107966] CPU features: enabling workaround for ARM erratum 834220
[    0.107972] Detected PIPT I-cache on CPU1
[    0.108010] CPU1: Booted secondary processor [410fd070]
[    0.148004] Detected PIPT I-cache on CPU2
[    0.148030] CPU2: Booted secondary processor [410fd070]
[    0.188098] Detected VIPT I-cache on CPU3
[    0.188141] CPU3: Booted secondary processor [410fd030]
[    0.228185] Detected VIPT I-cache on CPU4
[    0.228218] CPU4: Booted secondary processor [410fd030]
[    0.268275] Detected VIPT I-cache on CPU5
[    0.268307] CPU5: Booted secondary processor [410fd030]
[    0.268371] smp: Brought up 1 node, 6 CPUs
[    0.268413] SMP: Total of 6 processors activated.
[    0.268422] CPU features: detected feature: 32-bit EL0 Support
[    0.268693] CPU: All CPU(s) started at EL2
[    0.268722] alternatives: patching kernel code
[    0.274201] devtmpfs: initialized
[    0.279643] DMI not present or invalid.
[    0.279861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 7645041785100000 ns
[    0.279964] futex hash table entries: 2048 (order: 6, 262144 bytes)
[    0.280732] pinctrl core: initialized pinctrl subsystem
[    0.282412] NET: Registered protocol family 16
[    0.285364] cpuidle: using governor menu
[    0.286127] vdso: 2 pages (1 code @ ffff000008957000, 1 data @ ffff000008e550
00)
[    0.286145] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.287281] DMA: preallocated 256 KiB pool for atomic allocations
[    0.287694] Serial: AMBA PL011 UART driver
[    0.290358] 7ff80000.uart: ttyAMA0 at MMIO 0x7ff80000 (irq = 20, base_baud =
0) is a PL011 rev3
[    0.940769] console [ttyAMA0] enabled
[    0.957725] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.964907] ACPI: Interpreter disabled.
[    0.969376] vgaarb: loaded
[    0.972231] SCSI subsystem initialized
[    0.976271] libata version 3.00 loaded.
[    0.980302] usbcore: registered new interface driver usbfs
[    0.985777] usbcore: registered new interface driver hub
[    0.991121] usbcore: registered new device driver usb
[    0.996906] pps_core: LinuxPPS API ver. 1 registered
[    1.001843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <[email protected]>
[    1.010927] PTP clock support registered
[    1.014928] dmi: Firmware registration failed.
[    1.019547] Advanced Linux Sound Architecture Driver Initialized.
[    1.026151] clocksource: Switched to clocksource arch_sys_counter
[    1.032300] VFS: Disk quotas dquot_6.6.0
[    1.036233] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.043201] pnp: PnP ACPI: disabled
[    1.051862] NET: Registered protocol family 2
[    1.056710] TCP established hash table entries: 65536 (order: 7, 524288 bytes
)
[    1.064372] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.071579] TCP: Hash tables configured (established 65536 bind 65536)
[    1.078268] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.084409] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.091085] NET: Registered protocol family 1
[    1.095656] RPC: Registered named UNIX socket transport module.
[    1.101531] RPC: Registered udp transport module.
[    1.106194] RPC: Registered tcp transport module.
[    1.110857] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.117261] PCI: CLS 0 bytes, default 128
[    1.121357] Unpacking initramfs...
[    1.709963] Freeing initrd memory: 10428K
[    1.714832] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counte
rs available
[    1.723332] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
rs available
[    1.731507] kvm [1]: 8-bit VMID
[    1.734628] kvm [1]: IDMAP page: 80938000
[    1.738605] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[    1.745067] kvm [1]: Hyp mode initialized successfully
[    1.750209] kvm [1]: vgic-v2@2c04f000
[    1.753962] kvm [1]: vgic interrupt IRQ1
[    1.757869] kvm [1]: virtual timer IRQ4
[    1.764339] audit: initializing netlink subsys (disabled)
[    1.769835] audit: type=2000 audit(1.483:1): state=initialized audit_enabled=
0 res=1
[    1.770391] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    1.779029] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.779770] NFS: Registering the id_resolver key type
[    1.779788] Key type id_resolver registered
[    1.779791] Key type id_legacy registered
[    1.779801] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.779938] 9p: Installing v9fs 9p2000 file system support
[    1.782715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
46)
[    1.782720] io scheduler noop registered
[    1.782964] io scheduler cfq registered (default)
[    1.782968] io scheduler mq-deadline registered
[    1.782972] io scheduler kyber registered
[    1.787321] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip @0x000000001c1d0000 reg
istered
[    1.795512] dma-pl330 7ff00000.dma: Loaded driver for PL330 DMAC-341330
[    1.795521] dma-pl330 7ff00000.dma:  DBUFF-1024x16bytes Num_Chans-8 Num_Peri-
8 Num_Events-8
[    1.796956] xenfs: not registering filesystem on non-xen platform
[    1.801082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.802851] SuperH (H)SCI(F) driver initialized
[    1.803175] msm_serial: driver initialized
[    1.817669] loop: module loaded
[    1.818371] hisi_sas: driver version v1.6
[    1.820754] libphy: Fixed MDIO Bus: probed
[    1.821252] tun: Universal TUN/TAP device driver, 1.6
[    1.822165] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.822167] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.822221] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.822224] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.822271] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version
 2.4.0-k
[    1.822274] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.822559] sky2: driver version 1.30
[    1.849360] libphy: smsc911x-mdio: probed
[    1.849796] smsc911x 18000000.ethernet eth0: MAC Address: 00:02:f7:00:58:8d
[    1.850043] VFIO - User Level meta-driver version: 0.3
[    1.851288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.851292] ehci-pci: EHCI PCI platform driver
[    1.851344] ehci-platform: EHCI generic platform driver
[    1.851505] ehci-platform 7ffc0000.ehci: EHCI Host Controller
[    1.851528] ehci-platform 7ffc0000.ehci: new USB bus registered, assigned bus
 number 1
[    1.851782] ehci-platform 7ffc0000.ehci: irq 23, io mem 0x7ffc0000
[    1.866172] ehci-platform 7ffc0000.ehci: USB 2.0 started, EHCI 1.00
[    1.866856] hub 1-0:1.0: USB hub found
[    1.866893] hub 1-0:1.0: 1 port detected
[    1.867221] ehci-orion: EHCI orion driver
[    1.867319] ehci-exynos: EHCI EXYNOS driver
[    1.867403] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.867478] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.867515] ohci-pci: OHCI PCI platform driver
[    1.867564] ohci-platform: OHCI generic platform driver
[    1.867697] ohci-platform 7ffb0000.ohci: Generic Platform OHCI controller
[    1.867716] ohci-platform 7ffb0000.ohci: new USB bus registered, assigned bus
 number 2
[    1.867852] ohci-platform 7ffb0000.ohci: irq 22, io mem 0x7ffb0000
[    1.946749] hub 2-0:1.0: USB hub found
[    1.946775] hub 2-0:1.0: 1 port detected
[    1.947059] ohci-exynos: OHCI EXYNOS driver
[    1.947529] usbcore: registered new interface driver usb-storage
[    1.949502] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
[    1.949964] i2c /dev entries driver
[    1.957533] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000
irq 27,0 (pio)
[    1.957543] mmci-pl18x 1c050000.mmci: DMA channels RX none, TX none
[    1.994465] sdhci: Secure Digital Host Controller Interface driver
[    1.994468] sdhci: Copyright(c) Pierre Ossman
[    1.994872] Synopsys Designware Multimedia Card Interface Driver
[    1.998373] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.999405] leds-syscon 1c010000.apbregs:led0: registered LED vexpress:0
[    1.999553] leds-syscon 1c010000.apbregs:led1: registered LED vexpress:1
[    1.999668] leds-syscon 1c010000.apbregs:led2: registered LED vexpress:2
[    1.999795] leds-syscon 1c010000.apbregs:led3: registered LED vexpress:3
[    1.999908] leds-syscon 1c010000.apbregs:led4: registered LED vexpress:4
[    2.000035] leds-syscon 1c010000.apbregs:led5: registered LED vexpress:5
[    2.000142] leds-syscon 1c010000.apbregs:led6: registered LED vexpress:6
[    2.000253] leds-syscon 1c010000.apbregs:led7: registered LED vexpress:7
[    2.002704] ledtrig-cpu: registered to indicate activity on CPUs
[    2.003758] usbcore: registered new interface driver usbhid
[    2.003760] usbhid: USB HID core driver
[    2.003830] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[    2.004466] optee: probing for conduit method from DT.
[    2.008246] optee: initialized driver
[    2.009329] NET: Registered protocol family 17
[    2.009418] 9pnet: Installing 9P2000 support
[    2.009475] Key type dns_resolver registered
[    2.010221] registered taskstats version 1
[    2.012647] scpi_protocol scpi: SCP Protocol 1.0 Firmware 1.11.1 version
[    2.019897] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    2.022745] cpu cpu1: bL_cpufreq_init: CPU 1 initialized
[    2.025292] arm_big_little: bL_cpufreq_register: Registered platform driver:
scpi
[    2.049451] input: smb@8000000:motherboard:gpio_keys as /devices/platform/smb
@8000000/smb@8000000:motherboard/smb@8000000:motherboard:gpio_keys/input/input1
[    2.055749] rtc-pl031 1c170000.rtc: setting system clock to 2018-03-01 09:46:
48 UTC (1519897608)
[    2.055966] ALSA device list:
[    2.055968]   No soundcards found.
[    2.198270] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.280001] uart-pl011 7ff80000.uart: no DMA platform data
[    2.280456] Freeing unused kernel memory: 1088K
preparing networking...
[    2.321399] Generic PHY 18000000.ethernet-ffffffff:01: attached PHY driver [G
eneric PHY] (mii_bus:phy_addr=18000000.ethernet-ffffffff:01, irq=-1)
[    2.346516] smsc911x 18000000.ethernet eth0: SMSC911x/921x identified at 0xff
ff000009ed0000, IRQ: 26
udhcpc (v1.25.0.git) started
[    2.363759] hub 1-1:1.0: USB hub found
[    2.367652] hub 1-1:1.0: 4 ports detected
Sending discover...
[    2.970276] atkbd serio0: keyboard reset failed on 1c060000.kmi
[    4.218269] atkbd serio1: keyboard reset failed on 1c070000.kmi
Sending discover...
Sending select for 10.0.0.7...
Lease of 10.0.0.7 obtained, lease time 86400
running rc.d services...
mounting tmpfs at /dev ...done
mounting pts at /dev/pts ...done
creating initial mdev device nodes ...done
setting system time from /dev/rtc0
Starting telnetd...
Starting tee-supplicant...
uptime idle: 6.54 35.08

Please press Enter to activate this console.
root@FVP:/ [   27.610249] random: fast init done

root@FVP:/