API tools faq
paste
Advertisement
KOT040188

kot@192:~$ sudo smartctl --all /dev/sdc

KOT040188
Nov 29th, 2022
61
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.95 KB | None | 0 0
raw download clone embed print report
  1. kot@192:~$ sudo smartctl --all /dev/sdc
  2. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.8-1-default] (SUSE RPM)
  3. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Green
  7. Device Model: WDC WD30EZRX-00DC0B0
  8. Serial Number: WD-WMC1T2814555
  9. LU WWN Device Id: 5 0014ee 65887c046
  10. Firmware Version: 80.00A80
  11. User Capacity: 3.000.592.982.016 bytes [3,00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Device is: In smartctl database 7.3/5319
  14. ATA Version is: ACS-2 (minor revision not indicated)
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Tue Nov 29 19:02:51 2022 MSK
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (40320) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 404) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x70b5) SCT Status supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 31
  60. 3 Spin_Up_Time 0x0027 176 175 021 Pre-fail Always - 6166
  61. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 336
  62. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  64. 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1991
  65. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  66. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 336
  68. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 31
  69. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 304
  70. 194 Temperature_Celsius 0x0022 110 104 000 Old_age Always - 40
  71. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  72. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 22
  73. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 22
  74. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  75. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 22
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 14 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 14 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 40 51 08 a0 60 27 e1 Error: UNC 8 sectors at LBA = 0x012760a0 = 19357856
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. c8 00 08 a0 60 27 e1 08 03:46:18.623 READ DMA
  105.  
  106. Error 13 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
  107. When the command that caused the error occurred, the device was active or idle.
  108.  
  109. After command completion occurred, registers were:
  110. ER ST SC SN CL CH DH
  111. -- -- -- -- -- -- --
  112. 40 51 08 a0 60 27 e1 Error: UNC 8 sectors at LBA = 0x012760a0 = 19357856
  113.  
  114. Commands leading to the command that caused the error were:
  115. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  116. -- -- -- -- -- -- -- -- ---------------- --------------------
  117. c8 00 08 a0 60 27 e1 08 03:46:15.743 READ DMA
  118.  
  119. Error 12 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
  120. When the command that caused the error occurred, the device was active or idle.
  121.  
  122. After command completion occurred, registers were:
  123. ER ST SC SN CL CH DH
  124. -- -- -- -- -- -- --
  125. 40 51 08 a0 60 27 e1 Error: UNC 8 sectors at LBA = 0x012760a0 = 19357856
  126.  
  127. Commands leading to the command that caused the error were:
  128. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  129. -- -- -- -- -- -- -- -- ---------------- --------------------
  130. c8 00 08 a0 60 27 e1 08 03:46:04.885 READ DMA
  131. c8 00 08 48 60 27 e1 08 03:46:04.885 READ DMA
  132. c8 00 08 10 60 27 e1 08 03:46:04.884 READ DMA
  133. c8 00 08 f0 60 27 e1 08 03:46:04.884 READ DMA
  134. c8 00 08 d0 60 27 e1 08 03:46:04.884 READ DMA
  135.  
  136. Error 11 occurred at disk power-on lifetime: 1829 hours (76 days + 5 hours)
  137. When the command that caused the error occurred, the device was active or idle.
  138.  
  139. After command completion occurred, registers were:
  140. ER ST SC SN CL CH DH
  141. -- -- -- -- -- -- --
  142. 40 51 08 a0 60 27 e1 Error: UNC 8 sectors at LBA = 0x012760a0 = 19357856
  143.  
  144. Commands leading to the command that caused the error were:
  145. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  146. -- -- -- -- -- -- -- -- ---------------- --------------------
  147. c8 00 08 a0 60 27 e1 08 03:46:01.996 READ DMA
  148. ef 10 02 00 00 00 a0 08 03:46:01.996 SET FEATURES [Enable SATA feature]
  149. ec 00 00 00 00 00 a0 08 03:46:01.996 IDENTIFY DEVICE
  150. ef 03 46 00 00 00 a0 08 03:46:01.996 SET FEATURES [Set transfer mode]
  151.  
  152. Error 10 occurred at disk power-on lifetime: 1674 hours (69 days + 18 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 08 30 20 27 e1 Error: UNC 8 sectors at LBA = 0x01272030 = 19341360
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. c8 00 08 30 20 27 e1 08 01:03:08.530 READ DMA
  164. ef 10 02 00 00 00 a0 08 01:03:08.497 SET FEATURES [Enable SATA feature]
  165.  
  166. SMART Self-test log structure revision number 1
  167. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  168. # 1 Short offline Completed: read failure 90% 1988 19341360
  169. # 2 Short offline Completed: read failure 90% 1979 19341366
  170. # 3 Short offline Completed: read failure 90% 1968 19341360
  171. # 4 Short offline Completed: read failure 90% 1961 19341360
  172. # 5 Short offline Completed: read failure 90% 1955 19341360
  173. # 6 Short offline Completed: read failure 90% 1948 19341360
  174. # 7 Short offline Completed without error 00% 1943 -
  175. # 8 Short offline Completed: read failure 90% 1935 19341360
  176. # 9 Short offline Completed: read failure 90% 1928 19341366
  177. #10 Short offline Completed: read failure 90% 1922 19341360
  178. #11 Short offline Completed without error 00% 1907 -
  179. #12 Short offline Completed: read failure 90% 1894 19341360
  180. #13 Short offline Completed: read failure 90% 1882 19341366
  181. #14 Short offline Completed: read failure 90% 1874 19341360
  182. #15 Short offline Completed: read failure 90% 1865 19341360
  183. #16 Short offline Completed: read failure 90% 1854 19341360
  184. #17 Short offline Completed without error 00% 1846 -
  185. #18 Short offline Completed: read failure 90% 1834 19341360
  186. #19 Short offline Completed: read failure 90% 1825 19341360
  187. #20 Short offline Completed without error 00% 1817 -
  188. #21 Short offline Completed without error 00% 1809 -
  189.  
  190. SMART Selective self-test log data structure revision number 1
  191. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  192. 1 0 0 Not_testing
  193. 2 0 0 Not_testing
  194. 3 0 0 Not_testing
  195. 4 0 0 Not_testing
  196. 5 0 0 Not_testing
  197. Selective self-test flags (0x0):
  198. After scanning selected spans, do NOT read-scan remainder of disk.
  199. If Selective self-test is pending on power-up, resume after 0 minute delay.
  200.  
  201.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!