Ford Fusion Car wrap

★ Ashlynn Marshall takes out the Vinyl roll out of her duffle bag.
★ Ashlynn Marshall Brings the Vinyl roll then placing it on top of the car as she would start-
★ measuring the size of the Vinyl needed to wrap the tops.      ((Ashlynn Marshall))
★ Ashlynn Marshall marks the Vinyl with a pencil from her right pocket.
★ Bringing it back to the table to have it cut to the perfect size.      ((Ashlynn Marshall))
★ Ashlynn Marshall rolls back the exessive Vinyl and puts it aside leaving a big space for her to-
★ cut the Vinyl in the which has been marked.      ((Ashlynn Marshall))
★ Ashlynn Marshall reaches to her left pocket to get a box cutter and carefuly cut the marked she made earlier.
★ Ashlynn Marshall prepare the heatgun as she looks at the spray bottle containing alcohol which is use to-
★ clean the suface of the car.      ((Ashlynn Marshall))
★ Ashlynn Marshall takes the spray bottle and a piece of microfibre cleaning cloth, approaching the car as she-
★ starts spraying all parts of the car and wiping it down to remove any dust and dirts on it.      ((Ashlynn Marshall))
★ Ashlynn Marshall puts down the spray bottle and cleaning cloth and grabs the vinyl from the table.
★ Ashlynn Marshall opens a portion of the vinyl and start sticking it at the front top of the car.
★ Ashlynn Marshall reaches for the heatgun, starting it up and aiming it towards the vinyl as she would
★ stretch it to make make the the vinyl soft, and easier to be apply.      ((Ashlynn Marshall))
★ Ashlynn Marshall wraps her right hand with the microfibre cloth and slowly smoothing the vinyl on the top-
★ of the car, squezzing out any air bubbles out while heating it.      ((Ashlynn Marshall))
★ Ashlynn Marshall continues doing the same process as she would slowly peal off and sticks most-
★ of the vinyl to the tops with ease.      ((Ashlynn Marshall))
★ Ashlynn Marshall heats up the vinyl wrapped on top of the car, smoothing and squeezing out any possible air-
★ bubbles visible on the wrap.      ((Ashlynn Marshall))
★ Ashlynn Marshall takes out the box cutter again attempting to cut the exessive wraps of the vinyl making-
★ the top part completely wrapped.      ((Ashlynn Marshall))
★ Ashlynn Marshall peals off the exessive vinyl wraps pealing it off and throw it on the ground.
★ Ashlynn Marshall takes out the vinyl rolls again revealing a portion of it to measure the size needed to-
★ wraps the hood.      ((Ashlynn Marshall))
★ Ashlynn Marshall cuts the vinyl wrap to the perfect size of the hood.
★ Ashlynn Marshall puts back the vinyl roll to the table and working on the wraps for the hood.
★ Ashlynn Marshall peals off a little bit of the vinyl, taking the heatgun as she sticks the vinyl on the-
★ hood starting from the left to the right.      ((Ashlynn Marshall))
★ Ashlynn Marshall heats up the vinyl sticked to the hood as she would gently press and squezz out the air-
★ bubbles thats trapped under the wrap.      ((Ashlynn Marshall))
★ Ashlynn Marshall peals more portion of the vinyl, wrapping half of the hood simultaneously removing-
★ the air bubbles while heating it.      ((Ashlynn Marshall))
★ Ashlynn Marshall then peals away the last small portion of the vinyl and wrapping the hood-
★ completely with the vinyl.      ((Ashlynn Marshall))
★ Ashlynn Marshall takes out the box cutter and cuts off the exessive vinyl and having the hood wrapped neatly.
★ Ashlynn Marshall throws the exessive vinyl on the ground.
★ Ashlynn Marshall takes the vinyl rolls and starts measuring the front bumper.
★ Ashlynn Marshall cuts the needed size for the vinyl to wraps the front bumper.
★ Ashlynn Marshall puts back the vinyl roll on the ground as she would focus on the cutted vinyl.
★ Ashlynn Marshall wraps the front bumper starting from left to the right as she did before with the hood.
★ Ashlynn Marshall start heating the vinyl and slowly rubs it to remove the air bubble, while this time-
★ stretching it at the same time.      ((Ashlynn Marshall))
★ Ashlynn Marshall wraps the middle portion of the front bumper and continues to the right-
★ until she would have the front bumper fully wrapped neatly.      ((Ashlynn Marshall))
★ Ashlynn Marshall takes out the box cutter and starts cutting the exessive vinyl, tossing it on the-
★ ground as she pick up the vinyl roll for the next part of the car.      ((Ashlynn Marshall))
★ Ashlynn Marshall starts measuring the vinyl tp wrap spoiler and the trunk of the car.
★ Ashlynn Marshall cuts down the exessive vinyl and start wrapping the back side of the car.
★ Ashlynn Marshall starts wrapping the spoiler of the car. Heating, stretching and gently-
★ stick the vinyl on every parts of the spoiler.      ((Ashlynn Marshall))
★ Ashlynn Marshall finishes wrapping the spoiler and immediately starts on wrapping the trunk as well.
★ Ashlynn Marshall starts wrapping the trunk from left to the right while slowly squezzing out all the air-
★ bubbles visible to her eyes.      ((Ashlynn Marshall))
★ Ashlynn Marshall finishes wrapping the trunk as she would take out-
★ the box cutter and cuts off the exessive vinyl.      ((Ashlynn Marshall))
★ Ashlynn Marshall peals off the exessive vinyl and throws it on the ground.
★ Ashlynn Marshall picks up the vinyl roll and start measuring  the vinyl needed from the front-
★ fender of the car the very back fender.      ((Ashlynn Marshall))
★ Ashlynn Marshall cuts off the exessive vinyl and drop the roll on the ground as she starts sticking the wrap-
★ from the from fender and the left side of the driver seats.      ((Ashlynn Marshall))
★ Ashlynn Marshall slowly rubs out the air bubbles as she would heat it with the heatgun-
★ and stretching it hard.      ((Ashlynn Marshall))
★ Ashlynn Marshall continues wrapping the left backside of the door and to the back fender.
★ Ashlynn Marshall finishes wrapping the whole left side of the car as she would take out the box cutter-
★ cutting all the exessive vinyl and making a section on each part of the left side on the car      ((Ashlynn Marshall))
★ Ashlynn Marshall peals off the exessive vinyl and throws it on the ground.
★ Ashlynn Marshall picks up the vinyl roll and starts measuring the whole right side of the car.
★ Ashlynn Marshall drops the empty roll and starts sticking it on the front right fender of the car.
★ Ashlynn Marshall heating and stretching it, she would also simultaneously rubs out all the air bubbles.
★ Ashlynn Marshall continues wrapping the right back side of the passenger's door-
★ and all the way to the back fender.      ((Ashlynn Marshall))
★ Ashlynn Marshall heats it and strecthing the vinyl while she squezz out the air bubbles out making it-
★ looks as neat as possible.      ((Ashlynn Marshall))
★ Ashlynn Marshall has now done wrapping the whole right side of the car as she takes out the box cutter-
★ cutting all the exessive vinyl, pealing it off and throwing it on the ground.      ((Ashlynn Marshall))
★ Ashlynn Marshall goes around the car and check if theres any imperfection found on the car while she slowly-
★ puts back all the tools on the table.      ((Ashlynn Marshall))
★ The car has now fully wrappe with fresh new vinyl wraps.      ((Ashlynn Marshall))

The vinyl wraps >> http://imgur.com/jtUtsa0