API tools faq
paste
sporker

8.3-R verbose boot, cold boot, msix enabled

sporker
Aug 14th, 2012
93
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.58 KB | None | 0 0
raw download clone embed print report
  1. SMAP type=01 base=0000000000000000 len=0000000000092000
  2. SMAP type=02 base=0000000000092000 len=000000000000e000
  3. SMAP type=02 base=00000000000e6000 len=000000000001a000
  4. SMAP type=01 base=0000000000100000 len=00000000dfd80000
  5. SMAP type=03 base=00000000dfe80000 len=0000000000012000
  6. SMAP type=04 base=00000000dfe92000 len=000000000003e000
  7. SMAP type=02 base=00000000dfed0000 len=0000000000010000
  8. SMAP type=02 base=00000000dfeed000 len=0000000000013000
  9. SMAP type=02 base=00000000dff00000 len=0000000000100000
  10. SMAP type=02 base=00000000e0000000 len=0000000010000000
  11. SMAP type=02 base=00000000ffc00000 len=0000000000400000
  12. SMAP type=01 base=0000000100000000 len=000000071f000000
  13. Table 'FACP' at 0xdfe80290
  14. Table 'APIC' at 0xdfe80390
  15. APIC: Found table at 0xdfe80390
  16. APIC: Using the MADT enumerator.
  17. MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
  18. SMP: Added CPU 16 (AP)
  19. MADT: Found CPU APIC ID 17 ACPI ID 2: enabled
  20. SMP: Added CPU 17 (AP)
  21. MADT: Found CPU APIC ID 18 ACPI ID 3: enabled
  22. SMP: Added CPU 18 (AP)
  23. MADT: Found CPU APIC ID 19 ACPI ID 4: enabled
  24. SMP: Added CPU 19 (AP)
  25. MADT: Found CPU APIC ID 20 ACPI ID 5: enabled
  26. SMP: Added CPU 20 (AP)
  27. MADT: Found CPU APIC ID 21 ACPI ID 6: enabled
  28. SMP: Added CPU 21 (AP)
  29. MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
  30. MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
  31. Copyright (c) 1992-2012 The FreeBSD Project.
  32. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  33. The Regents of the University of California. All rights reserved.
  34. FreeBSD is a registered trademark of The FreeBSD Foundation.
  35. FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
  36. [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
  37. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff833c7000.
  38. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff833c7230.
  39. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff833c7898.
  40. Preloaded elf obj module "/boot/kernel/geom_uzip.ko" at 0xffffffff833c7e88.
  41. Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff833c8438.
  42. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff833c89a0.
  43. Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff833c89f0.
  44. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff833c8fd8.
  45. Timecounter "i8254" frequency 1193182 Hz quality 0
  46. Calibrating TSC clock ... TSC clock: 3100013624 Hz
  47. CPU: AMD Opteron(tm) Processor 4234 (3100.01-MHz K8-class CPU)
  48. Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2
  49. Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  50. Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
  51. AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  52. AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  53. TSC: P-state invariant
  54. L1 2MB data TLB: 32 entries, fully associative
  55. L1 2MB instruction TLB: 24 entries, fully associative
  56. L1 4KB data TLB: 32 entries, fully associative
  57. L1 4KB instruction TLB: 48 entries, fully associative
  58. L1 data cache: 16 kbytes, 64 bytes/line, 1 lines/tag, 4-way associative
  59. L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  60. L2 2MB data TLB: 1024 entries, 8-way associative
  61. L2 2MB instruction TLB: 0 entries, 8-way associative
  62. L2 4KB data TLB: 1024 entries, 8-way associative
  63. L2 4KB instruction TLB: 1024 entries, 8-way associative
  64. L2 unified cache: 2048 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
  65. real memory = 34359738368 (32768 MB)
  66. Physical memory chunk(s):
  67. 0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages)
  68. 0x00000000033f4000 - 0x00000000dfe7ffff, 3702046720 bytes (903820 pages)
  69. 0x0000000100000000 - 0x00000007e1f2ffff, 29560602624 bytes (7216944 pages)
  70. avail memory = 33058291712 (31526 MB)
  71. ACPI APIC Table: <121211 APIC1744>
  72. INTR: Adding local APIC 17 as a target
  73. INTR: Adding local APIC 18 as a target
  74. INTR: Adding local APIC 19 as a target
  75. INTR: Adding local APIC 20 as a target
  76. INTR: Adding local APIC 21 as a target
  77. FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
  78. FreeBSD/SMP: 1 package(s) x 6 core(s)
  79. cpu0 (BSP): APIC ID: 16
  80. cpu1 (AP): APIC ID: 17
  81. cpu2 (AP): APIC ID: 18
  82. cpu3 (AP): APIC ID: 19
  83. cpu4 (AP): APIC ID: 20
  84. cpu5 (AP): APIC ID: 21
  85. APIC: CPU 0 has ACPI ID 1
  86. APIC: CPU 1 has ACPI ID 2
  87. APIC: CPU 2 has ACPI ID 3
  88. APIC: CPU 3 has ACPI ID 4
  89. APIC: CPU 4 has ACPI ID 5
  90. APIC: CPU 5 has ACPI ID 6
  91. x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
  92. x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000082000
  93. x86bios: EBDA 0x092000-0x09ffff at 0xffffff0000092000
  94. x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
  95. ULE: setup cpu 0
  96. ULE: setup cpu 1
  97. ULE: setup cpu 2
  98. ULE: setup cpu 3
  99. ULE: setup cpu 4
  100. ULE: setup cpu 5
  101. ACPI: RSDP 0xfb330 00024 (v02 ACPIAM)
  102. ACPI: XSDT 0xdfe80100 00054 (v01 121211 XSDT1744 20111212 MSFT 00000097)
  103. ACPI: FACP 0xdfe80290 000F4 (v03 121211 FACP1744 20111212 MSFT 00000097)
  104. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
  105. ACPI: DSDT 0xdfe80470 0461E (v01 8010_ 8010_001 00000001 INTL 20051117)
  106. ACPI: FACS 0xdfe92000 00040
  107. ACPI: APIC 0xdfe80390 0009E (v01 121211 APIC1744 20111212 MSFT 00000097)
  108. ACPI: MCFG 0xdfe80430 0003C (v01 121211 OEMMCFG 20111212 MSFT 00000097)
  109. ACPI: OEMB 0xdfe92040 000CB (v01 121211 OEMB1744 20111212 MSFT 00000097)
  110. ACPI: HPET 0xdfe8a470 00038 (v01 121211 OEMHPET 20111212 MSFT 00000097)
  111. ACPI: SSDT 0xdfe8a4b0 01158 (v01 A M I POWERNOW 00000001 AMD 00000001)
  112. MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
  113. ioapic0: Routing external 8259A's -> intpin 0
  114. MADT: Found IO APIC ID 1, Interrupt 24 at 0xfec20000
  115. MADT: Interrupt override: source 0, irq 2
  116. ioapic0: Routing IRQ 0 -> intpin 2
  117. MADT: Interrupt override: source 9, irq 9
  118. ioapic0: intpin 9 trigger: level
  119. ioapic0: intpin 9 polarity: low
  120. lapic: Routing NMI -> LINT1
  121. lapic: LINT1 trigger: edge
  122. lapic: LINT1 polarity: high
  123. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  124. ioapic1 <Version 2.1> irqs 24-55 on motherboard
  125. cpu0 BSP:
  126. ID: 0x10000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  127. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  128. timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  129. wlan: <802.11 Link Layer>
  130. nfslock: pseudo-device
  131. kbd: new array size 4
  132. kbd1 at kbdmux0
  133. mem: <memory>
  134. io: <I/O>
  135. null: <null device, zero device>
  136. random: <entropy source, Software, Yarrow>
  137. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
  138. acpi0: <121211 XSDT1744> on motherboard
  139. PCIe: Memory Mapped configuration base @ 0xe0000000
  140. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
  141. acpi0: [MPSAFE]
  142. acpi0: [ITHREAD]
  143. ACPI: Executed 2 blocks of module-level executable AML code
  144. acpi0: Power Button (fixed)
  145. acpi0: reservation of fec00000, 1000 (3) failed
  146. acpi0: reservation of fee00000, 1000 (3) failed
  147. acpi0: reservation of ffb80000, 80000 (3) failed
  148. acpi0: reservation of fec10000, 20 (3) failed
  149. acpi0: reservation of 0, a0000 (3) failed
  150. acpi0: reservation of 100000, dff00000 (3) failed
  151. ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 -> 10
  152. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  153. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  154. cpu0: <ACPI CPU> on acpi0
  155. cpu1: <ACPI CPU> on acpi0
  156. cpu2: <ACPI CPU> on acpi0
  157. cpu3: <ACPI CPU> on acpi0
  158. cpu4: <ACPI CPU> on acpi0
  159. cpu5: <ACPI CPU> on acpi0
  160. pci_link0: Index IRQ Rtd Ref IRQs
  161. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  162. Validation 0 11 N 0 4 7 10 11 12 14 15
  163. After Disable 0 255 N 0 4 7 10 11 12 14 15
  164. pci_link1: Index IRQ Rtd Ref IRQs
  165. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  166. Validation 0 10 N 0 4 7 10 11 12 14 15
  167. After Disable 0 255 N 0 4 7 10 11 12 14 15
  168. pci_link2: Index IRQ Rtd Ref IRQs
  169. Initial Probe 0 14 N 0 4 7 10 11 12 14 15
  170. Validation 0 14 N 0 4 7 10 11 12 14 15
  171. After Disable 0 255 N 0 4 7 10 11 12 14 15
  172. pci_link3: Index IRQ Rtd Ref IRQs
  173. Initial Probe 0 7 N 0 4 7 10 11 12 14 15
  174. Validation 0 7 N 0 4 7 10 11 12 14 15
  175. After Disable 0 255 N 0 4 7 10 11 12 14 15
  176. pci_link4: Index IRQ Rtd Ref IRQs
  177. Initial Probe 0 255 N 0 4 7 10 11 12 14 15
  178. Validation 0 255 N 0 4 7 10 11 12 14 15
  179. After Disable 0 255 N 0 4 7 10 11 12 14 15
  180. pci_link5: Index IRQ Rtd Ref IRQs
  181. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  182. Validation 0 11 N 0 4 7 10 11 12 14 15
  183. After Disable 0 255 N 0 4 7 10 11 12 14 15
  184. pci_link6: Index IRQ Rtd Ref IRQs
  185. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  186. Validation 0 10 N 0 4 7 10 11 12 14 15
  187. After Disable 0 255 N 0 4 7 10 11 12 14 15
  188. pci_link7: Index IRQ Rtd Ref IRQs
  189. Initial Probe 0 15 N 0 4 7 10 11 12 14 15
  190. Validation 0 15 N 0 4 7 10 11 12 14 15
  191. After Disable 0 255 N 0 4 7 10 11 12 14 15
  192. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  193. acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
  194. Timecounter "HPET" frequency 14318180 Hz quality 900
  195. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  196. pci0: <ACPI PCI bus> on pcib0
  197. pci0: domain=0, physical bus=0
  198. found-> vendor=0x1002, dev=0x5a12, revid=0x02
  199. domain=0, bus=0, slot=0, func=0
  200. class=06-00-00, hdrtype=0x00, mfdev=1
  201. cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords)
  202. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  203. MSI supports 4 messages
  204. found-> vendor=0x1002, dev=0x5a1c, revid=0x00
  205. domain=0, bus=0, slot=9, func=0
  206. class=06-04-00, hdrtype=0x01, mfdev=0
  207. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  208. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  209. intpin=a, irq=11
  210. powerspec 3 supports D0 D3 current D0
  211. MSI supports 1 message
  212. pcib0: matched entry for 0.9.INTA
  213. pcib0: slot 9 INTA hardwired to IRQ 53
  214. found-> vendor=0x1002, dev=0x5a1d, revid=0x00
  215. domain=0, bus=0, slot=10, func=0
  216. class=06-04-00, hdrtype=0x01, mfdev=0
  217. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  218. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  219. intpin=a, irq=10
  220. powerspec 3 supports D0 D3 current D0
  221. MSI supports 1 message
  222. pcib0: matched entry for 0.10.INTA
  223. pcib0: slot 10 INTA hardwired to IRQ 54
  224. found-> vendor=0x1002, dev=0x4391, revid=0x00
  225. domain=0, bus=0, slot=17, func=0
  226. class=01-06-01, hdrtype=0x00, mfdev=0
  227. cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
  228. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  229. intpin=a, irq=10
  230. powerspec 2 supports D0 D3 current D0
  231. map[10]: type I/O Port, range 32, base 0xb400, size 3, enabled
  232. map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
  233. map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
  234. map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
  235. map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
  236. map[24]: type Memory, range 32, base 0xfe9fa400, size 10, enabled
  237. pcib0: matched entry for 0.17.INTA
  238. pcib0: slot 17 INTA hardwired to IRQ 22
  239. found-> vendor=0x1002, dev=0x4397, revid=0x00
  240. domain=0, bus=0, slot=18, func=0
  241. class=0c-03-10, hdrtype=0x00, mfdev=1
  242. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  243. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  244. intpin=a, irq=11
  245. map[10]: type Memory, range 32, base 0xfe9f6000, size 12, enabled
  246. pcib0: matched entry for 0.18.INTA
  247. pcib0: slot 18 INTA hardwired to IRQ 16
  248. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f6000
  249. ohci early: SMM active, request owner change
  250. found-> vendor=0x1002, dev=0x4398, revid=0x00
  251. domain=0, bus=0, slot=18, func=1
  252. class=0c-03-10, hdrtype=0x00, mfdev=0
  253. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  254. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  255. intpin=a, irq=11
  256. map[10]: type Memory, range 32, base 0xfe9f7000, size 12, enabled
  257. pcib0: matched entry for 0.18.INTA
  258. pcib0: slot 18 INTA hardwired to IRQ 16
  259. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f7000
  260. ohci early: SMM active, request owner change
  261. found-> vendor=0x1002, dev=0x4396, revid=0x00
  262. domain=0, bus=0, slot=18, func=2
  263. class=0c-03-20, hdrtype=0x00, mfdev=0
  264. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  265. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  266. intpin=b, irq=10
  267. powerspec 2 supports D0 D1 D2 D3 current D0
  268. map[10]: type Memory, range 32, base 0xfe9fa800, size 8, enabled
  269. pcib0: matched entry for 0.18.INTB
  270. pcib0: slot 18 INTB hardwired to IRQ 17
  271. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fa800
  272. found-> vendor=0x1002, dev=0x4397, revid=0x00
  273. domain=0, bus=0, slot=19, func=0
  274. class=0c-03-10, hdrtype=0x00, mfdev=1
  275. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  276. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  277. intpin=a, irq=14
  278. map[10]: type Memory, range 32, base 0xfe9f8000, size 12, enabled
  279. pcib0: matched entry for 0.19.INTA
  280. pcib0: slot 19 INTA hardwired to IRQ 18
  281. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f8000
  282. ohci early: SMM active, request owner change
  283. found-> vendor=0x1002, dev=0x4398, revid=0x00
  284. domain=0, bus=0, slot=19, func=1
  285. class=0c-03-10, hdrtype=0x00, mfdev=0
  286. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  287. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  288. intpin=a, irq=14
  289. map[10]: type Memory, range 32, base 0xfe9f9000, size 12, enabled
  290. pcib0: matched entry for 0.19.INTA
  291. pcib0: slot 19 INTA hardwired to IRQ 18
  292. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f9000
  293. ohci early: SMM active, request owner change
  294. found-> vendor=0x1002, dev=0x4396, revid=0x00
  295. domain=0, bus=0, slot=19, func=2
  296. class=0c-03-20, hdrtype=0x00, mfdev=0
  297. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  298. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  299. intpin=b, irq=7
  300. powerspec 2 supports D0 D1 D2 D3 current D0
  301. map[10]: type Memory, range 32, base 0xfe9fac00, size 8, enabled
  302. pcib0: matched entry for 0.19.INTB
  303. pcib0: slot 19 INTB hardwired to IRQ 19
  304. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fac00
  305. found-> vendor=0x1002, dev=0x4385, revid=0x3d
  306. domain=0, bus=0, slot=20, func=0
  307. class=0c-05-00, hdrtype=0x00, mfdev=1
  308. cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
  309. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  310. found-> vendor=0x1002, dev=0x439d, revid=0x00
  311. domain=0, bus=0, slot=20, func=3
  312. class=06-01-00, hdrtype=0x00, mfdev=1
  313. cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
  314. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  315. found-> vendor=0x1002, dev=0x4384, revid=0x00
  316. domain=0, bus=0, slot=20, func=4
  317. class=06-04-01, hdrtype=0x01, mfdev=1
  318. cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
  319. lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
  320. found-> vendor=0x1002, dev=0x4399, revid=0x00
  321. domain=0, bus=0, slot=20, func=5
  322. class=0c-03-10, hdrtype=0x00, mfdev=0
  323. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  324. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  325. intpin=c, irq=14
  326. map[10]: type Memory, range 32, base 0xfe9fb000, size 12, enabled
  327. pcib0: matched entry for 0.20.INTC
  328. pcib0: slot 20 INTC hardwired to IRQ 18
  329. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fb000
  330. ohci early: SMM active, request owner change
  331. found-> vendor=0x1022, dev=0x1600, revid=0x00
  332. domain=0, bus=0, slot=24, func=0
  333. class=06-00-00, hdrtype=0x00, mfdev=1
  334. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  335. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  336. found-> vendor=0x1022, dev=0x1601, revid=0x00
  337. domain=0, bus=0, slot=24, func=1
  338. class=06-00-00, hdrtype=0x00, mfdev=1
  339. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  340. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  341. found-> vendor=0x1022, dev=0x1602, revid=0x00
  342. domain=0, bus=0, slot=24, func=2
  343. class=06-00-00, hdrtype=0x00, mfdev=1
  344. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  345. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  346. found-> vendor=0x1022, dev=0x1603, revid=0x00
  347. domain=0, bus=0, slot=24, func=3
  348. class=06-00-00, hdrtype=0x00, mfdev=1
  349. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  350. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  351. found-> vendor=0x1022, dev=0x1604, revid=0x00
  352. domain=0, bus=0, slot=24, func=4
  353. class=06-00-00, hdrtype=0x00, mfdev=1
  354. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  355. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  356. found-> vendor=0x1022, dev=0x1605, revid=0x00
  357. domain=0, bus=0, slot=24, func=5
  358. class=06-00-00, hdrtype=0x00, mfdev=1
  359. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  360. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  361. pcib1: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
  362. pcib1: domain 0
  363. pcib1: secondary bus 3
  364. pcib1: subordinate bus 3
  365. pcib1: I/O decode 0xe000-0xefff
  366. pcib1: memory decode 0xfeb00000-0xfebfffff
  367. pcib1: no prefetched decode
  368. pci3: <ACPI PCI bus> on pcib1
  369. pci3: domain=0, physical bus=3
  370. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  371. domain=0, bus=3, slot=0, func=0
  372. class=02-00-00, hdrtype=0x00, mfdev=0
  373. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  374. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  375. intpin=a, irq=11
  376. powerspec 2 supports D0 D3 current D0
  377. MSI supports 1 message, 64 bit
  378. MSI-X supports 5 messages in map 0x1c
  379. map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled
  380. pcib1: requested memory range 0xfebe0000-0xfebfffff: good
  381. map[18]: type I/O Port, range 32, base 0xe800, size 5, enabled
  382. pcib1: requested I/O range 0xe800-0xe81f: in range
  383. map[1c]: type Memory, range 32, base 0xfebdc000, size 14, enabled
  384. pcib1: requested memory range 0xfebdc000-0xfebdffff: good
  385. pcib1: matched entry for 3.0.INTA
  386. pcib1: slot 0 INTA hardwired to IRQ 48
  387. em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe800-0xe81f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 48 at device 0.0 on pci3
  388. em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
  389. em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfebdc000
  390. em0: attempting to allocate 3 MSI-X vectors (5 supported)
  391. msi: routing MSI-X IRQ 256 to local APIC 16 vector 49
  392. msi: routing MSI-X IRQ 257 to local APIC 16 vector 50
  393. msi: routing MSI-X IRQ 258 to local APIC 16 vector 51
  394. em0: using IRQs 256-258 for MSI-X
  395. em0: Using MSIX interrupts with 3 vectors
  396. em0: [MPSAFE]
  397. em0: [ITHREAD]
  398. em0: [MPSAFE]
  399. em0: [ITHREAD]
  400. em0: [MPSAFE]
  401. em0: [ITHREAD]
  402. em0: bpf attached
  403. em0: Ethernet address: 00:e0:81:cd:92:cd
  404. pcib2: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
  405. pcib2: domain 0
  406. pcib2: secondary bus 2
  407. pcib2: subordinate bus 2
  408. pcib2: I/O decode 0xd000-0xdfff
  409. pcib2: memory decode 0xfea00000-0xfeafffff
  410. pcib2: no prefetched decode
  411. pci2: <ACPI PCI bus> on pcib2
  412. pci2: domain=0, physical bus=2
  413. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  414. domain=0, bus=2, slot=0, func=0
  415. class=02-00-00, hdrtype=0x00, mfdev=0
  416. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  417. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  418. intpin=a, irq=15
  419. powerspec 2 supports D0 D3 current D0
  420. MSI supports 1 message, 64 bit
  421. MSI-X supports 5 messages in map 0x1c
  422. map[10]: type Memory, range 32, base 0xfeae0000, size 17, enabled
  423. pcib2: requested memory range 0xfeae0000-0xfeafffff: good
  424. map[18]: type I/O Port, range 32, base 0xd800, size 5, enabled
  425. pcib2: requested I/O range 0xd800-0xd81f: in range
  426. map[1c]: type Memory, range 32, base 0xfeadc000, size 14, enabled
  427. pcib2: requested memory range 0xfeadc000-0xfeadffff: good
  428. pcib2: matched entry for 2.0.INTA
  429. pcib2: slot 0 INTA hardwired to IRQ 47
  430. em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd800-0xd81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci2
  431. em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
  432. em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfeadc000
  433. em1: attempting to allocate 3 MSI-X vectors (5 supported)
  434. msi: routing MSI-X IRQ 259 to local APIC 16 vector 52
  435. msi: routing MSI-X IRQ 260 to local APIC 16 vector 53
  436. msi: routing MSI-X IRQ 261 to local APIC 16 vector 54
  437. em1: using IRQs 259-261 for MSI-X
  438. em1: Using MSIX interrupts with 3 vectors
  439. em1: [MPSAFE]
  440. em1: [ITHREAD]
  441. em1: [MPSAFE]
  442. em1: [ITHREAD]
  443. em1: [MPSAFE]
  444. em1: [ITHREAD]
  445. em1: bpf attached
  446. em1: Ethernet address: 00:e0:81:cd:92:cc
  447. ahci0: <ATI IXP700 AHCI SATA controller> port 0xb400-0xb407,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfe9fa400-0xfe9fa7ff irq 22 at device 17.0 on pci0
  448. ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe9fa400
  449. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 16 vector 55
  450. ahci0: [MPSAFE]
  451. ahci0: [ITHREAD]
  452. ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
  453. ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports
  454. ahci0: Caps2:
  455. ahcich0: <AHCI channel> at channel 0 on ahci0
  456. ahcich0: [MPSAFE]
  457. ahcich0: [ITHREAD]
  458. ahcich0: Caps:
  459. ahcich1: <AHCI channel> at channel 1 on ahci0
  460. ahcich1: [MPSAFE]
  461. ahcich1: [ITHREAD]
  462. ahcich1: Caps:
  463. ahcich2: <AHCI channel> at channel 2 on ahci0
  464. ahcich2: [MPSAFE]
  465. ahcich2: [ITHREAD]
  466. ahcich2: Caps:
  467. ahcich3: <AHCI channel> at channel 3 on ahci0
  468. ahcich3: [MPSAFE]
  469. ahcich3: [ITHREAD]
  470. ahcich3: Caps:
  471. ahcich4: <AHCI channel> at channel 4 on ahci0
  472. ahcich4: [MPSAFE]
  473. ahcich4: [ITHREAD]
  474. ahcich4: Caps:
  475. ahcich5: <AHCI channel> at channel 5 on ahci0
  476. ahcich5: [MPSAFE]
  477. ahcich5: [ITHREAD]
  478. ahcich5: Caps:
  479. ohci0: <OHCI (generic) USB controller> mem 0xfe9f6000-0xfe9f6fff irq 16 at device 18.0 on pci0
  480. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 56
  481. ohci0: [MPSAFE]
  482. ohci0: [ITHREAD]
  483. usbus0: <OHCI (generic) USB controller> on ohci0
  484. usbus0: bpf attached
  485. ohci0: usbpf: Attached
  486. ohci1: <OHCI (generic) USB controller> mem 0xfe9f7000-0xfe9f7fff irq 16 at device 18.1 on pci0
  487. ohci1: [MPSAFE]
  488. ohci1: [ITHREAD]
  489. usbus1: <OHCI (generic) USB controller> on ohci1
  490. usbus1: bpf attached
  491. ohci1: usbpf: Attached
  492. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9fa800-0xfe9fa8ff irq 17 at device 18.2 on pci0
  493. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 16 vector 57
  494. ehci0: [MPSAFE]
  495. ehci0: [ITHREAD]
  496. ehci0: Dropped interrupts workaround enabled
  497. usbus2: EHCI version 1.0
  498. usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
  499. usbus2: bpf attached
  500. ehci0: usbpf: Attached
  501. ohci2: <OHCI (generic) USB controller> mem 0xfe9f8000-0xfe9f8fff irq 18 at device 19.0 on pci0
  502. ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 58
  503. ohci2: [MPSAFE]
  504. ohci2: [ITHREAD]
  505. usbus3: <OHCI (generic) USB controller> on ohci2
  506. usbus3: bpf attached
  507. ohci2: usbpf: Attached
  508. ohci3: <OHCI (generic) USB controller> mem 0xfe9f9000-0xfe9f9fff irq 18 at device 19.1 on pci0
  509. ohci3: [MPSAFE]
  510. ohci3: [ITHREAD]
  511. usbus4: <OHCI (generic) USB controller> on ohci3
  512. usbus4: bpf attached
  513. ohci3: usbpf: Attached
  514. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe9fac00-0xfe9facff irq 19 at device 19.2 on pci0
  515. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 59
  516. ehci1: [MPSAFE]
  517. ehci1: [ITHREAD]
  518. ehci1: Dropped interrupts workaround enabled
  519. usbus5: EHCI version 1.0
  520. usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
  521. usbus5: bpf attached
  522. ehci1: usbpf: Attached
  523. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  524. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  525. isa0: <ISA bus> on isab0
  526. pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  527. pcib3: domain 0
  528. pcib3: secondary bus 1
  529. pcib3: subordinate bus 1
  530. pcib3: I/O decode 0xc000-0xcfff
  531. pcib3: memory decode 0xfdf00000-0xfe7fffff
  532. pcib3: no prefetched decode
  533. pcib3: Subtractively decoded bridge.
  534. pci1: <ACPI PCI bus> on pcib3
  535. pci1: domain=0, physical bus=1
  536. found-> vendor=0x1a03, dev=0x2000, revid=0x10
  537. domain=0, bus=1, slot=9, func=0
  538. class=03-00-00, hdrtype=0x00, mfdev=0
  539. cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
  540. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  541. intpin=a, irq=15
  542. powerspec 3 supports D0 D1 D2 D3 current D0
  543. map[10]: type Memory, range 32, base 0xfe000000, size 23, enabled
  544. pcib3: requested memory range 0xfe000000-0xfe7fffff: good
  545. map[14]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
  546. pcib3: requested memory range 0xfdfe0000-0xfdffffff: good
  547. map[18]: type I/O Port, range 32, base 0xc800, size 7, enabled
  548. pcib3: requested I/O range 0xc800-0xc87f: in range
  549. pcib3: matched entry for 1.9.INTA
  550. pcib3: slot 9 INTA hardwired to IRQ 23
  551. vgapci0: <VGA-compatible display> port 0xc800-0xc87f mem 0xfe000000-0xfe7fffff,0xfdfe0000-0xfdffffff irq 23 at device 9.0 on pci1
  552. ohci4: <OHCI (generic) USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 20.5 on pci0
  553. ohci4: [MPSAFE]
  554. ohci4: [ITHREAD]
  555. usbus6: <OHCI (generic) USB controller> on ohci4
  556. usbus6: bpf attached
  557. ohci4: usbpf: Attached
  558. acpi_button0: <Power Button> on acpi0
  559. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  560. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  561. acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  562. device_attach: acpi_hpet1 attach returned 12
  563. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  564. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 60
  565. uart0: [FILTER]
  566. uart0: fast interrupt
  567. uart0: console (9600,n,8,1)
  568. uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
  569. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 61
  570. uart1: [FILTER]
  571. uart1: fast interrupt
  572. acpi0: wakeup code va 0xffffff890349c000 pa 0x4000
  573. ex_isa_identify()
  574. ahc_isa_probe 0: ioport 0xc00 alloc failed
  575. ahc_isa_probe 11: ioport 0xbc00 alloc failed
  576. isa_probe_children: disabling PnP devices
  577. atrtc: atrtc0 already exists; skipping it
  578. sc: sc0 already exists; skipping it
  579. uart: uart0 already exists; skipping it
  580. uart: uart1 already exists; skipping it
  581. isa_probe_children: probing non-PnP devices
  582. orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc800-0xcd7ff on isa0
  583. atkbd: the current kbd controller command byte 0067
  584. atkbd: unable to set the command byte.
  585. sc0: <System console> at flags 0x100 on isa0
  586. sc0: CGA <16 virtual consoles, flags=0x300>
  587. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  588. vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
  589. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  590. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  591. kbd0 at atkbd0
  592. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
  593. ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 62
  594. atkbd0: [GIANT-LOCKED]
  595. atkbd0: [ITHREAD]
  596. psm0: current command byte:0067
  597. psm: failed to restore the keyboard controller command byte.
  598. psm0: unable to set the command byte.
  599. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  600. ppc0: cannot reserve I/O port range
  601. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  602. isa_probe_children: probing PnP devices
  603. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  604. acpi_throttle0: P_CNT from P_BLK 0x810
  605. hwpstate0: <Cool`n'Quiet 2.0> on cpu0
  606. Device configuration finished.
  607. procfs registered
  608. ZFS filesystem version 5
  609. ZFS storage pool version 28
  610. lapic: Divisor 2, Frequency 100000440 Hz
  611. Timecounter "TSC" frequency 3100013624 Hz quality -100
  612. Timecounters tick every 1.000 msec
  613. vlan: initialized, using hash tables with chaining
  614. lo0: bpf attached
  615. hptrr: no controller detected.
  616. md0: Preloaded image </boot/mfsroot> 35856384 bytes at 0xffffffff81175c80
  617. usbus0: 12Mbps Full Speed USB v1.0
  618. usbus1: 12Mbps Full Speed USB v1.0
  619. usbus2: 480Mbps High Speed USB v2.0
  620. usbus3: 12Mbps Full Speed USB v1.0
  621. usbus4: 12Mbps Full Speed USB v1.0
  622. usbus5: 480Mbps High Speed USB v2.0
  623. usbus6: 12Mbps Full Speed USB v1.0
  624. ahcich0: AHCI reset...
  625. ahcich0: SATA connect time=100us status=00000123
  626. ahcich0: AHCI reset: device found
  627. ahcich0: ugen0.1: <ATI> at usbus0
  628. uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  629. ugen1.1: <ATI> at usbus1
  630. uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  631. ugen2.1: <ATI> at usbus2
  632. uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  633. ugen3.1: <ATI> at usbus3
  634. uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  635. ugen4.1: <ATI> at usbus4
  636. uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  637. ugen5.1: <ATI> at usbus5
  638. uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
  639. ugen6.1: <ATI> at usbus6
  640. uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
  641. AHCI reset: device ready after 0ms
  642. (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
  643. (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
  644. ahcich1: AHCI reset...
  645. ahcich1: SATA connect time=100us status=00000123
  646. ahcich1: AHCI reset: device found
  647. ahcich1: AHCI reset: device ready after 0ms
  648. (aprobe0:ahcich1:0:15:0): SIGNATURE: 0000
  649. (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
  650. ahcich2: AHCI reset...
  651. ahcich2: SATA connect timeout time=10000us status=00000000
  652. ahcich2: AHCI reset: device not found
  653. ahcich3: AHCI reset...
  654. ahcich3: SATA connect timeout time=10000us status=00000000
  655. ahcich3: AHCI reset: device not found
  656. ahcich4: AHCI reset...
  657. ahcich4: SATA connect time=100us status=00000123
  658. ahcich4: AHCI reset: device found
  659. ahcich4: AHCI reset: device ready after 0ms
  660. (aprobe0:ahcich4:0:15:0): SIGNATURE: 0000
  661. (aprobe0:ahcich4:0:0:0): SIGNATURE: 0000
  662. ahcich5: AHCI reset...
  663. ahcich5: SATA connect time=100us status=00000123
  664. ahcich5: AHCI reset: device found
  665. ahcich5: AHCI reset: device ready after 0ms
  666. (aprobe0:ahcich5:0:15:0): SIGNATURE: 0000
  667. (aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
  668. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
  669. ada0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  670. ada0: Serial Number WD-WXD1E71KUUR2
  671. ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada0
  672. PIO 8192bytes)
  673. ada0: Command Queueing enabled
  674. ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  675. ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
  676. ada1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  677. ada1: Serial Number WD-WX81E81AKUK3
  678. ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  679. ada1: Command Queueing enabled
  680. ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  681. ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
  682. ada2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  683. ada2: Serial Number WD-WX71E71MSF58
  684. ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  685. ada2: Command Queueing enabled
  686. GEOM: new disk ada1
  687. ada2: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  688. ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
  689. ada3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  690. ada3: Serial Number WD-WXD1E71LVFE8
  691. ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  692. ada3: Command Queueing enabled
  693. ada3: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  694. pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
  695. pass0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  696. pass0: Serial Number WD-WXD1E71KUUR2
  697. pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  698. pass0: Command Queueing enabled
  699. pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
  700. pass1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  701. pass1: Serial Number WD-WX81E81AKUK3
  702. pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  703. pass1: Command Queueing enabled
  704. pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
  705. pass2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  706. pass2: Serial Number WD-WX71E71MSF58
  707. pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  708. pass2: Command Queueing enabled
  709. pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
  710. pass3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  711. pass3: Serial Number WD-WXD1E71LVFE8
  712. pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada2
  713. PIO 8192bytes)
  714. pass3: Command Queueing enabled
  715. ATA PseudoRAID loaded
  716. SMP: AP CPU #1 Launched!
  717. cpu1 AP:
  718. ID: 0x11000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  719. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  720. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  721. SMP: AP CPU #3 Launched!
  722. cpu3 AP:
  723. ID: 0x13000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  724. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  725. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  726. SMP: AP CPU #4 Launched!
  727. cpu4 AP:
  728. ID: 0x14000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  729. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  730. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  731. SMP: AP CPU #5 Launched!
  732. cpu5 AP:
  733. ID: 0x15000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  734. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  735. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  736. SMP: AP CPU #2 Launched!
  737. cpu2 AP:
  738. ID: 0x12000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  739. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  740. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  741. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 17 vector 48
  742. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 18 vector 48
  743. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 19 vector 48
  744. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 20 vector 48
  745. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 21 vector 48
  746. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 17 vector 49
  747. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 18 vector 49
  748. msi: Assigning MSI-X IRQ 256 to local APIC 19 vector 49
  749. panic: m_getzone: m_getjcl: invalid cluster type
  750. msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 49
  751. cpuid = 1
  752. msi: Assigning MSI-X IRQ 258 to local APIC 21 vector 49
  753. KDB: stack backtrace:
  754. msi: Assigning MSI-X IRQ 260 to local APIC 17 vector 50
  755. #0 0xffffffff8063dcbe at kdb_backtrace+0x5e
  756. msi: Assigning MSI-X IRQ 261 to local APIC 18 vector 50
  757. GEOM: new disk ada3
  758. #1 0xffffffff8060aed7 at panic+0x187
  759. #2 0xffffffff80340ede at em_refresh_mbufs+0x20e
  760. uhub6: #3 0xffffffff803414bc at em_rxeof+0x48c
  761. 2 ports with 2 removable, self powered
  762. #4 0xffffffff803415c4 at em_msix_rx+0x24
  763. uhub4: #5 0xffffffff805e2914 at intr_event_execute_handlers+0x104
  764. 3 ports with 3 removable, self powered
  765. #6 0xffffffff805e3fa5 at ithread_loop+0x95
  766. uhub3: #7 0xffffffff805dfb2f at fork_exit+0x11f
  767. 3 ports with 3 removable, self powered
  768. #8 0xffffffff808e8cbe at fork_trampoline+0xe
  769. Uptime: 9s
  770. Cannot dump. Device not defined or unavailable.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!