API tools faq
paste
Guest User

Untitled

a guest
Aug 6th, 2017
273
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.32 KB | None | 0 0
raw download clone embed print report
  1. Booting Trusted Firmware
  2. BL1: v1.2(release):armada-17.02.0:
  3. BL1: Built : 09:41:56, Jun 2 2NOTICE: BL2: v1.2(release):armada-17.02.0:
  4. NOTICE: BL2: Built : 09:41:57, Jun 2 20NOTICE: BL31: v1.2(release):armada-17.02.0:
  5. NOTICE: BL31:
  6.  
  7. U-Boot 2015.01-armada-17.02.0-g8128e91 (Jun 02 2017 - 09:41:51)
  8.  
  9. I2C: ready
  10. DRAM: 1 GiB
  11. Board: DB-88F3720-ESPRESSOBin
  12. CPU @ 1000 [MHz]
  13. L2 @ 800 [MHz]
  14. TClock @ 200 [MHz]
  15. DDR @ 800 [MHz]
  16. Comphy-0: PEX0 2.5 Gbps
  17. Comphy-1: USB3 5 Gbps
  18. Comphy-2: SATA0 5 Gbps
  19. Now running in RAM - U-Boot at: 3ff2b000
  20. U-Boot DT blob at : 000000003fa18168
  21. MMC: XENON-SDHCI: 0
  22. SF: Detected W25Q32DW with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  23. PCIE-0: Link down
  24. SCSI: SATA link 0 timeout.
  25. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  26. flags: ncq led only pmp fbss pio slum part sxs
  27. Net: neta0
  28. Hit any key to stop autoboot: 0
  29. switch to partitions #0, OK
  30. mmc0 is current device
  31. 14344704 bytes read in 4888 ms (2.8 MiB/s)
  32. 5471873 bytes read in 1978 ms (2.6 MiB/s)
  33. 11444 bytes read in 175 ms (63.5 KiB/s)
  34. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  35. Image Name: uInitrd
  36. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  37. Data Size: 5471809 Bytes = 5.2 MiB
  38. Load Address: 00000000
  39. Entry Point: 00000000
  40. Verifying Checksum ... OK
  41. ## Flattened Device Tree blob at 01000000
  42. Booting using the fdt blob at 0x1000000
  43. Loading Ramdisk to 1fac8000, end 1ffffe41 ... OK
  44. Using Device Tree in place at 0000000001000000, end 0000000001005cb3
  45.  
  46. Starting kernel ...
  47.  
  48. Timer summary in microseconds:
  49. Mark Elapsed Stage
  50. 0 0 reset
  51. 721,000 721,000 id=64
  52. 734,000 13,000 id=65
  53. 734,000 0 main_loop
  54. 11,022,000 10,288,000 bootm_start
  55. 15,790,000 4,768,000 id=9
  56. 15,790,000 0 id=10
  57. 17,184,000 1,394,000 id=11
  58. 17,189,000 5,000 id=12
  59. 18,947,000 1,758,000 start_kernel
  60. 18,947,000 0 id=15
  61. 176,853,089,499,289,073,36176,853,089,499,099,603,36 board_init_f
  62.  
  63. Accumulated time:
  64. [ 0.000000] Booting Linux on physical CPU 0x0
  65. [ 0.000000] Initializing cgroup subsys cpuset
  66. [ 0.000000] Initializing cgroup subsys cpu
  67. [ 0.000000] Initializing cgroup subsys cpuacct
  68. [ 0.000000] Linux version 4.4.79-mvebu64 (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Sun Aug 6 01:06:17 PDT 2017
  69. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  70. [ 0.000000] earlycon: Early serial console at MMIO 0xd0012000 (options '')
  71. [ 0.000000] bootconsole [uart0] enabled
  72. [ 0.000000] efi: Getting EFI parameters from FDT:
  73. [ 0.000000] efi: UEFI not found.
  74. [ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000
  75. [ 0.000000] psci: probing for conduit method from DT.
  76. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  77. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  78. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  79. [ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03efc6000 s25240 r8192 d32104 u65536
  80. [ 0.000000] Detected VIPT I-cache on CPU0
  81. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  82. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257536
  83. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait
  84. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  85. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  86. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  87. [ 0.000000] software IO TLB [mem 0x39c00000-0x3dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
  88. [ 0.000000] Memory: 926324K/1046528K available (9629K kernel code, 592K rwdata, 3316K rodata, 356K init, 290K bss, 103820K reserved, 16384K cma-reserved)
  89. [ 0.000000] Virtual kernel memory layout:
  90. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  91. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  92. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
  93. [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  94. [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  95. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  96. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
  97. [ 0.000000] .init : 0xffffffc000d27000 - 0xffffffc000d80000 ( 356 KB)
  98. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d26554 ( 12954 KB)
  99. [ 0.000000] .data : 0xffffffc000d9a000 - 0xffffffc000e2e200 ( 593 KB)
  100. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  101. [ 0.000000] Preemptible hierarchical RCU implementation.
  102. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  103. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
  104. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  105. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  106. [ 0.000000] GIC: Using split EOI/Deactivate mode
  107. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000d1d40000
  108. [ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
  109. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  110. [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  111. [ 0.008397] Console: colour dummy device 80x25
  112. [ 0.012905] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  113. [ 0.023458] pid_max: default: 32768 minimum: 301
  114. [ 0.028258] Security Framework initialized
  115. [ 0.032456] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  116. [ 0.039324] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  117. [ 0.047149] Initializing cgroup subsys memory
  118. [ 0.051579] Initializing cgroup subsys devices
  119. [ 0.056130] Initializing cgroup subsys freezer
  120. [ 0.060698] Initializing cgroup subsys net_cls
  121. [ 0.065266] Initializing cgroup subsys net_prio
  122. [ 0.069926] Initializing cgroup subsys hugetlb
  123. [ 0.074493] Initializing cgroup subsys pids
  124. [ 0.079030] EFI services will not be available.
  125. [ 0.083637] ASID allocator initialised with 65536 entries
  126. [ 0.125336] Detected VIPT I-cache on CPU1
  127. [ 0.125360] CPU1: found redistributor 1 region 0:0x00000000d1d60000
  128. [ 0.125383] CPU1: Booted secondary processor [410fd034]
  129. [ 0.125436] Brought up 2 CPUs
  130. [ 0.144354] SMP: Total of 2 processors activated.
  131. [ 0.149198] CPU features: detected feature: GIC system register CPU interface
  132. [ 0.156546] CPU: All CPU(s) started at EL2
  133. [ 0.160767] alternatives: patching kernel code
  134. [ 0.165772] devtmpfs: initialized
  135. [ 0.171767] DMI not present or invalid.
  136. [ 0.175866] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  137. [ 0.185849] futex hash table entries: 512 (order: 4, 65536 bytes)
  138. [ 0.192824] xor: measuring software checksum speed
  139. [ 0.237751] 8regs : 1862.000 MB/sec
  140. [ 0.282014] 8regs_prefetch: 1711.000 MB/sec
  141. [ 0.326631] 32regs : 2273.000 MB/sec
  142. [ 0.370888] 32regs_prefetch: 1982.000 MB/sec
  143. [ 0.375559] xor: using function: 32regs (2273.000 MB/sec)
  144. [ 0.381129] pinctrl core: initialized pinctrl subsystem
  145. [ 0.387580] NET: Registered protocol family 16
  146. [ 0.404151] cpuidle: using governor ladder
  147. [ 0.420313] cpuidle: using governor menu
  148. [ 0.424509] vdso: 2 pages (1 code @ ffffffc000da1000, 1 data @ ffffffc000da0000)
  149. [ 0.432080] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  150. [ 0.439756] DMA: preallocated 256 KiB pool for atomic allocations
  151. [ 0.446067] Serial: AMBA PL011 UART driver
  152. [ 0.451443] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 7, base_baud = 0) is a mvebu-uart
  153. [ 0.460354] console [ttyMV0] enabled
  154. [ 0.460354] console [ttyMV0] enabled
  155. [ 0.467702] bootconsole [uart0] disabled
  156. [ 0.467702] bootconsole [uart0] disabled
  157. [ 0.476486] armada-3700-pinctrl d0013830.north-bridge-pinctrl: registered pinctrl driver
  158. [ 0.484784] armada-3700-pinctrl d0018830.south-bridge-pinctrl: registered pinctrl driver
  159. [ 0.588744] raid6: int64x1 gen() 371 MB/s
  160. [ 0.660663] raid6: int64x1 xor() 380 MB/s
  161. [ 0.732736] raid6: int64x2 gen() 597 MB/s
  162. [ 0.804782] raid6: int64x2 xor() 513 MB/s
  163. [ 0.876865] raid6: int64x4 gen() 911 MB/s
  164. [ 0.948889] raid6: int64x4 xor() 645 MB/s
  165. [ 1.020953] raid6: int64x8 gen() 945 MB/s
  166. [ 1.089009] raid6: int64x8 xor() 614 MB/s
  167. [ 1.161095] raid6: neonx1 gen() 630 MB/s
  168. [ 1.233161] raid6: neonx1 xor() 651 MB/s
  169. [ 1.305223] raid6: neonx2 gen() 1033 MB/s
  170. [ 1.377245] raid6: neonx2 xor() 889 MB/s
  171. [ 1.449305] raid6: neonx4 gen() 1331 MB/s
  172. [ 1.517368] raid6: neonx4 xor() 1015 MB/s
  173. [ 1.589404] raid6: neonx8 gen() 1391 MB/s
  174. [ 1.661461] raid6: neonx8 xor() 1028 MB/s
  175. [ 1.665518] raid6: using algorithm neonx8 gen() 1391 MB/s
  176. [ 1.671269] raid6: .... xor() 1028 MB/s, rmw enabled
  177. [ 1.676123] raid6: using intx1 recovery algorithm
  178. [ 1.681537] ACPI: Interpreter disabled.
  179. [ 1.685457] gpio-regulator soc:internal-regs:regulator@0: Could not obtain regulator setting GPIOs: -517
  180. [ 1.695064] armada3700-avs d0011500.avs: error getting max cpu frequency
  181. [ 1.702061] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  182. [ 1.709997] vgaarb: loaded
  183. [ 1.712995] SCSI subsystem initialized
  184. [ 1.716966] usbcore: registered new interface driver usbfs
  185. [ 1.722212] usbcore: registered new interface driver hub
  186. [ 1.727712] usbcore: registered new device driver usb
  187. [ 1.733442] pps_core: LinuxPPS API ver. 1 registered
  188. [ 1.738514] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  189. [ 1.748061] PTP clock support registered
  190. [ 1.752337] dmi: Firmware registration failed.
  191. [ 1.757189] armada37xx-clk-pm d0014018.cpu-pm-clk: error getting max cpu frequency
  192. [ 1.765294] NetLabel: Initializing
  193. [ 1.768184] NetLabel: domain hash size = 128
  194. [ 1.773150] NetLabel: protocols = UNLABELED CIPSOv4
  195. [ 1.778299] NetLabel: unlabeled traffic allowed by default
  196. [ 1.784219] clocksource: Switched to clocksource arch_sys_counter
  197. [ 1.790394] pnp: PnP ACPI: disabled
  198. [ 1.800729] NET: Registered protocol family 2
  199. [ 1.805826] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  200. [ 1.813032] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  201. [ 1.819962] TCP: Hash tables configured (established 8192 bind 8192)
  202. [ 1.826658] UDP hash table entries: 512 (order: 2, 16384 bytes)
  203. [ 1.832726] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  204. [ 1.839565] NET: Registered protocol family 1
  205. [ 1.844388] RPC: Registered named UNIX socket transport module.
  206. [ 1.850172] RPC: Registered udp transport module.
  207. [ 1.854929] RPC: Registered tcp transport module.
  208. [ 1.859950] RPC: Registered tcp NFSv4.1 backchannel transport module.
  209. [ 1.866896] Trying to unpack rootfs image as initramfs...
  210. [ 2.134269] Freeing initrd memory: 5340K (ffffffc01fac8000 - ffffffc01ffff000)
  211. [ 2.141983] kvm [1]: GICv3: no GICV resource entry
  212. [ 2.146695] kvm [1]: disabling GICv2 emulation
  213. [ 2.151447] kvm [1]: interrupt-controller@ffffffc0000abdb8 IRQ30
  214. [ 2.157614] kvm [1]: timer IRQ3
  215. [ 2.160450] kvm [1]: Hyp mode initialized successfully
  216. [ 2.168394] audit: initializing netlink subsys (disabled)
  217. [ 2.173686] audit: type=2000 audit(2.096:1): initialized
  218. [ 2.179693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  219. [ 2.194334] VFS: Disk quotas dquot_6.6.0
  220. [ 2.198275] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  221. [ 2.207165] NFS: Registering the id_resolver key type
  222. [ 2.212254] Key type id_resolver registered
  223. [ 2.216817] Key type id_legacy registered
  224. [ 2.220737] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  225. [ 2.227489] jffs2: version 2.2. (NAND) ?© 2001-2006 Red Hat, Inc.
  226. [ 2.234300] fuse init (API version 7.23)
  227. [ 2.238819] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  228. [ 2.250056] async_tx: api initialized (async)
  229. [ 2.254305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  230. [ 2.261835] io scheduler noop registered
  231. [ 2.266081] io scheduler deadline registered
  232. [ 2.270070] io scheduler cfq registered (default)
  233. [ 2.277010] irq: Cannot allocate irq_descs @ IRQ38, assuming pre-allocated
  234. [ 2.284324] irq: Cannot allocate irq_descs @ IRQ74, assuming pre-allocated
  235. [ 2.291776] libphy: Fixed MDIO Bus: probed
  236. [ 2.296064] tun: Universal TUN/TAP device driver, 1.6
  237. [ 2.300762] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  238. [ 2.307463] libphy: mdio_driver_register: mv88e6xxx
  239. [ 2.312427] libphy: orion_mdio_bus: probed
  240. [ 2.316596] mdio_bus d0032004.mdio-mi:01: mdio_device_register
  241. [ 2.326514] sky2: driver version 1.30
  242. [ 2.330256] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  243. [ 2.336161] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  244. [ 2.342336] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  245. [ 2.349096] igb: Copyright (c) 2007-2014 Intel Corporation.
  246. [ 2.354996] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  247. [ 2.363289] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  248. [ 2.369452] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  249. [ 2.377396] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
  250. [ 2.383480] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
  251. [ 2.393201] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
  252. [ 2.399015] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  253. [ 2.406606] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  254. [ 2.413871] advk-pcie d0070000.pcie: Failed to obtain clock from DT
  255. [ 2.424966] mv_xor d0060900.xor: Marvell shared XOR driver
  256. [ 2.448782] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  257. [ 2.476807] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  258. [ 2.489130] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  259. [ 2.497679] Unable to detect cache hierarchy from DT for CPU 0
  260. [ 2.504779] brd: module loaded
  261. [ 2.512649] loop: module loaded
  262. [ 2.516182] SCSI Media Changer driver v0.25
  263. [ 2.522374] VFIO - User Level meta-driver version: 0.3
  264. [ 2.533141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  265. [ 2.539841] ehci-pci: EHCI PCI platform driver
  266. [ 2.544400] ehci-platform: EHCI generic platform driver
  267. [ 2.549681] ehci-orion: EHCI orion driver
  268. [ 2.553757] orion-ehci d005e000.usb: EHCI Host Controller
  269. [ 2.559256] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  270. [ 2.567204] orion-ehci d005e000.usb: irq 27, io mem 0xd005e000
  271. [ 2.584232] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  272. [ 2.590638] hub 1-0:1.0: USB hub found
  273. [ 2.594371] hub 1-0:1.0: 1 port detected
  274. [ 2.598885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  275. [ 2.604949] ohci-pci: OHCI PCI platform driver
  276. [ 2.609771] ohci-platform: OHCI generic platform driver
  277. [ 2.615450] usbcore: registered new interface driver uas
  278. [ 2.620872] usbcore: registered new interface driver usb-storage
  279. [ 2.626846] usbcore: registered new interface driver ums-alauda
  280. [ 2.632953] usbcore: registered new interface driver ums-cypress
  281. [ 2.639241] usbcore: registered new interface driver ums-datafab
  282. [ 2.645272] usbcore: registered new interface driver ums_eneub6250
  283. [ 2.651644] usbcore: registered new interface driver ums-freecom
  284. [ 2.657754] usbcore: registered new interface driver ums-isd200
  285. [ 2.664046] usbcore: registered new interface driver ums-jumpshot
  286. [ 2.670154] usbcore: registered new interface driver ums-karma
  287. [ 2.676439] usbcore: registered new interface driver ums-onetouch
  288. [ 2.682652] usbcore: registered new interface driver ums-realtek
  289. [ 2.689028] usbcore: registered new interface driver ums-sddr09
  290. [ 2.694955] usbcore: registered new interface driver ums-sddr55
  291. [ 2.702128] usbcore: registered new interface driver ums-usbat
  292. [ 2.709107] mousedev: PS/2 mouse device common for all mice
  293. [ 2.715413] i2c /dev entries driver
  294. [ 2.719034] md: linear personality registered for level -1
  295. [ 2.724282] md: raid0 personality registered for level 0
  296. [ 2.729934] md: raid1 personality registered for level 1
  297. [ 2.735423] md: raid10 personality registered for level 10
  298. [ 2.741167] md: raid6 personality registered for level 6
  299. [ 2.746645] md: raid5 personality registered for level 5
  300. [ 2.752217] md: raid4 personality registered for level 4
  301. [ 2.757678] cpu cpu0: Cannot get clock for CPU0
  302. [ 2.762511] sdhci: Secure Digital Host Controller Interface driver
  303. [ 2.768908] sdhci: Copyright(c) Pierre Ossman
  304. [ 2.772882] sdhci-pltfm: SDHCI platform and OF driver helper
  305. [ 2.779438] xenon-sdhci d00d0000.sdhci: Failed to setup input clk: -517
  306. [ 2.786051] ledtrig-cpu: registered to indicate activity on CPUs
  307. [ 2.792027] hidraw: raw HID events driver (C) Jiri Kosina
  308. [ 2.800286] NET: Registered protocol family 10
  309. [ 2.805351] NET: Registered protocol family 17
  310. [ 2.810056] Distributed Switch Architecture driver version 0.1
  311. [ 2.815895] Key type dns_resolver registered
  312. [ 2.820675] registered taskstats version 1
  313. [ 2.826922] Btrfs loaded
  314. [ 2.839505] Key type encrypted registered
  315. [ 2.843805] armada3700-avs d0011500.avs: Unsupported CPU frwquency 25MHZ
  316. [ 2.850407] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  317. [ 2.858678] armada3700-avs: probe of d0011500.avs failed with error -1
  318. [ 2.869731] mvneta d0030000.ethernet eth0: Using device tree mac address f0:ad:4e:03:64:7f
  319. [ 3.140473] PCI host bridge /soc/pcie@d0070000 ranges:
  320. [ 3.145632] MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  321. [ 3.151011] IO 0xe9000000..0xe900ffff -> 0xe9000000
  322. [ 4.156521] advk-pcie d0070000.pcie: link never came up
  323. [ 4.161829] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  324. [ 4.168251] pci_bus 0000:00: root bus resource [bus 00-ff]
  325. [ 4.173706] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  326. [ 4.181158] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  327. [ 5.622610] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
  328. [ 5.632609] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  329. [ 5.641707] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
  330. [ 5.650654] scsi host0: ahci-mvebu
  331. [ 5.654173] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e0177] port 0x100 irq 29
  332. [ 5.662514] xhci-hcd d0058000.usb3: xHCI Host Controller
  333. [ 5.667682] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 2
  334. [ 5.675578] xhci-hcd d0058000.usb3: hcc params 0x0a000998 hci version 0x100 quirks 0x00010090
  335. [ 5.684248] xhci-hcd d0058000.usb3: irq 26, io mem 0xd0058000
  336. [ 5.691004] hub 2-0:1.0: USB hub found
  337. [ 5.694470] hub 2-0:1.0: 1 port detected
  338. [ 5.699679] xhci-hcd d0058000.usb3: xHCI Host Controller
  339. [ 5.704745] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 3
  340. [ 5.712962] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  341. [ 5.721326] hub 3-0:1.0: USB hub found
  342. [ 5.724971] hub 3-0:1.0: 1 port detected
  343. [ 5.729758] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  344. [ 5.734660] xenon-sdhci d00d0000.sdhci: No vmmc regulator found
  345. [ 5.776344] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  346. [ 5.809257] libphy: mv88e6xxx SMI: probed
  347. [ 5.813085] mdio_bus d0032004.mdio-mi: switch 0x341 probed: Marvell 88E6341, revision 0
  348. [ 5.821339] mvneta d0030000.ethernet eth0: [0]: detected a Marvell 88E6341 switch
  349. [ 5.836859] mmc0: new high speed SDHC card at address aaaa
  350. [ 5.842965] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
  351. [ 5.848700] mmcblk0: p1
  352. [ 5.967214] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1)
  353. [ 5.984243] ata1: SATA link down (SStatus 0 SControl 300)
  354. [ 6.043212] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1)
  355. [ 6.119220] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1)
  356. [ 6.133117] hctosys: unable to open rtc device (rtc0)
  357. [ 6.139902] Freeing unused kernel memory: 356K (ffffffc000d27000 - ffffffc000d80000)
  358. [ 6.147723] Freeing alternatives memory: 76K (ffffffc000d80000 - ffffffc000d93000)
  359. Loading, please wait...
  360. [ 6.184637] systemd-udevd[1081]: starting version 215
  361. [ 6.191108] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  362. Begin: Loading essential drivers ... done.
  363. Begin: Running /scripts/init-premount ... done.
  364. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... mdadm: No arrays found in config file or automatically
  365. Failure: failed to assemble all arrays.
  366. done.
  367. [ 6.403317] device-mapper: uevent: version 1.0.3
  368. [ 6.408568] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  369. done.
  370. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  371. done.
  372. Begin: Will now check root file system ... fsck from util-linux 2.25.2
  373. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  374. /dev/mmcblk0p1: recovering journal
  375. /dev/mmcblk0p1: Clearing orphaned inode 753 (uid=0, gid=0, mode=0100644, size=921)
  376. /dev/mmcblk0p1: clean, 67688/470400 files, 418083/1937244 blocks
  377. done.
  378. [ 6.997087] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  379. done.
  380. Begin: Running /scripts/local-bottom ... done.
  381. Begin: Running /scripts/init-bottom ... done.
  382. [ 7.355976] random: systemd: uninitialized urandom read (16 bytes read, 46 bits of entropy available[ 7.368423] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +)
  383. [ 7.381891] systemd[1]: Detected architecture 'arm64'.
  384.  
  385. Welcome to Debian GNU/Linux 8 (jessie)!
  386.  
  387. [ 7.405631] systemd[1]: Set hostname to <espressobin>.
  388. [ 7.506069] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
  389. [ 7.583454] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 53 bits of entropy available)
  390. [ 7.616389] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
  391. [ 7.626152] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
  392. [ 7.635896] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
  393. [ 7.657950] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
  394. [ 7.667949] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
  395. [ 7.677131] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
  396. [ 7.855426] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  397. [ 7.872709] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  398. [ 7.880876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  399. [ 7.888704] systemd[1]: Expecting device dev-ttyMV0.device Expecting device dev-ttyMV0.device...
  400. [ 7.900340] systemd[1]: Expecting device dev-ttyS0.device...
  401. Expecting device dev-ttyS0.device...
  402. [ 7.912309] systemd[1]: Starting Remote File Systems (Pre).
  403. [ OK ] Reached target Remote File Systems (Pre).
  404. [ 7.928289] systemd[1]: Reached target Remote File Systems (Pre).
  405. [ 7.934244] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  406. [ 7.943817] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  407. [ 7.952412] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  408. [ 7.960457] systemd[1]: Starting Root Slice.[ OK ] Created slice Root Slice.
  409. [ 7.972310] systemd[1]: Created slice Root Slice.
  410. [ 7.976973] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  411. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  412. [ 7.992327] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  413. [ 7.999056] systemd[1]: Starting Delayed Shutdown Socket.[ OK ] Listening on Delayed Shutdown Socket.
  414. [ 8.012302] systemd[1]: Listening on Delayed Shutdown Socket.
  415. [ 8.018222] systemd[1]: Starting Journal Socket (/dev/log).[ OK ] Listening on Journal Socket (/dev/log).
  416. [ 8.032304] systemd[1]: Listening on Journal Socket (/dev/log).
  417. [ 8.038145] systemd[1]: Starting Device-mapper event daemon FIFOs[ OK ] Listening on Device-mapper event daemon FIFOs.
  418. [ 8.052303] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  419. [ 8.058851] systemd[1]: Starting LVM2 metadata daemon socket.
  420. [ OK ] Listening on LVM2 metadata daemon socket.
  421. [ 8.072307] systemd[1]: Listening on LVM2 metadata daemon socket.
  422. [ 8.078322] systemd[1]: Starting User and Session Slice.
  423. [ OK ] Created slice User and Session Slice.
  424. [ 8.092310] systemd[1]: Created slice User and Session Slice.
  425. [ 8.098162] systemd[1]: Starting udev Control Socket.
  426. [ OK ] Listening on udev Control Socket.
  427. [ 8.112314] systemd[1]: Listening on udev Control Socket.
  428. [ 8.117558] systemd[1]: Starting udev Kernel Socket.
  429. [ OK ] Listening on udev Kernel Socket.
  430. [ 8.132306] systemd[1]: Listening on udev Kernel Socket.
  431. [ 8.137472] systemd[1]: Starting Journal Socket.
  432. [ OK ] Listening on Journal Socket.
  433. [ 8.148318] systemd[1]: Listening on Journal Socket.
  434. [ 8.153676] systemd[1]: Starting System Slice.
  435. [ OK ] Created slice System Slice.
  436. [ 8.164335] systemd[1]: Created slice System Slice.
  437. [ 8.169050] systemd[1]: Starting Increase datagram queue length. Starting Increase datagram queue length...
  438. [ 8.200759] systemd[1]: Starting Restore / save the current clock.. Starting Restore / save the current clock...
  439. Starting Nameserver information manager...rmation manager...
  440. [ 8.248701] systemd[1]: Started Set Up Additional Binary Formats.
  441. Mounting Debug File System...bug File System...
  442. [ 8.284883] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  443. Starting Create list of required static device nodes...rrent kernel...
  444. [ 8.306577] systemd[1]: Mounting Huge Pages File System...
  445. Mounting Huge Pages File System...
  446. [ 8.322152] systemd[1]: Mounting POSIX Message Queue File System...
  447. Mounting POSIX Message Queue File System...
  448. [ 8.342067] systemd[1]: Starting udev Coldplug all Devices...
  449. Starting udev Coldplug all Devices...
  450. [ 8.368751] systemd[1]: Starting system-getty.slice.
  451. [ OK ] Created slice system-getty.slice.
  452. [ 8.384531] systemd[1]: Created slice system-getty.slice.
  453. [ 8.389980] systemd[1]: Starting system-serial\x2dgetty.slice.
  454. [ OK ] Created slice system-serial\x2dgetty.slice.
  455. [ 8.404431] systemd[1]: Created slice system-serial\x2dgetty.slice.
  456. [ 8.413772] systemd[1]: Starting Load Kernel Modules...
  457. Starting Load Kernel Modules...
  458. [ 8.440780] systemd[1]: Started File System Check on Root Device.
  459. [ 8.447328] systemd[1]: Starting Slices.
  460. [ OK ] Reached target Slices.
  461. [ 8.460360] systemd[1]: Reached target Slices.
  462. [ OK ] Mounted POSIX Message Queue File System.
  463. [ 8.476340] systemd[1]: Mounted POSIX Message Queue File System[ OK ] Mounted Huge Pages File System.
  464. [ 8.488307] systemd[1]: Mounted Huge Pages File System.
  465. [ OK ] Mounted Debug File System.
  466. [ 8.500300] systemd[1]: Mounted Debug File System.
  467. [ OK ] Started Increase datagram queue length.
  468. [ 8.512343] systemd[1]: Started Increase datagram queue length.
  469. [ OK ] Started Restore / save the current clock.
  470. [ 8.528333] systemd[1]: Started Restore / save the current clock.
  471. [ OK ] Started Create list of required static device nodes ...current kernel.
  472. [ 8.560414] systemd[1]: Started Create list of required static device nodes for the current kernel.
  473. [ OK ] Started Load Kernel Modules.
  474. [ 8.580460] systemd[1]: Started Load Kernel Modules.
  475. [ OK ] Started Nameserver information manager.
  476. [ 8.596548] systemd[1]: Started Nameserver information manager.
  477. [ OK ] Started udev Coldplug all Devices.
  478. [ 8.612404] systemd[1]: Started udev Coldplug all Devices.
  479. [ 8.621102] systemd[1]: Time has been changed
  480. [ 8.690796] systemd[1]: Starting udev Wait for Complete Device Initialization Starting udev Wait for Complete Device Initialization...
  481. Starting Apply Kernel Variables...ernel Variables...
  482. [ 8.738613] systemd[1]: Mounting Configuration File System...
  483. Mounting Configuration File System...
  484. [ 8.754345] systemd[1]: Mounting FUSE Control File System...
  485. Mounting FUSE Control File System...
  486. Starting Create Static Device Nodes in /dev...
  487. [ OK ] Listening on Syslog Socket.
  488. Starting Journal Service...
  489. [ OK ] Started Journal Service.
  490. [ OK ] Mounted FUSE Control File System.
  491. [ OK ] Mounted Configuration File System.
  492. [ OK ] Started Apply Kernel Variables.
  493. [ OK ] Started Create Static Device Nodes in /dev.
  494. Starting udev Kernel Device Manager...
  495. [ OK ] Started udev Kernel Device Manager.
  496. Starting LSB: Set preliminary keymap...
  497. Starting LSB: Tune IDE hard disks...
  498. Starting LSB: MD array assembly...
  499. [ OK ] Started LSB: Tune IDE hard disks.
  500. [ OK ] Started LSB: MD array assembly.
  501. [ OK ] Found device /dev/ttyS0.
  502. [ OK ] Found device /dev/ttyMV0.
  503. [ OK ] Started LSB: Set preliminary keymap.
  504. Starting Remount Root and Kernel File Systems...
  505. [ OK ] Started Remount Root and Kernel File Systems.
  506. [ OK ] Created slice system-ifup.slice.
  507. Activating swap /var/swap...
  508. Starting Initial Check File System Quotas...
  509. [ OK ] Reached target Local File Systems (Pre).
  510. Mounting /tmp...
  511. Starting Load/Save Random Seed...
  512. [ OK ] Mounted /tmp.
  513. [ OK ] Activated swap /var/swap.
  514. [ OK ] Started udev Wait for Complete Device Initialization.
  515. [ OK ] Started Load/Save Random Seed.
  516. [ OK ] Started Initial Check File System Quotas.
  517. Starting Activation of LVM2 logical volumes...
  518. Starting Copy rules generated while the root was ro...
  519. [ OK ] Reached target Swap.
  520. [ OK ] Started Copy rules generated while the root was ro.
  521. [ OK ] Started Activation of LVM2 logical volumes.
  522. [ OK ] Reached target Encrypted Volumes.
  523. Starting Activation of LVM2 logical volumes...
  524. [ OK ] Started Activation of LVM2 logical volumes.
  525. Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
  526. [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
  527. [ OK ] Reached target Local File Systems.
  528. Starting Create Volatile Files and Directories...
  529. Starting Cleanup PHP session files...
  530. Starting Cleanup monit state file...
  531. Starting folder2ram systemd service...
  532. Starting LSB: Raise network interfaces....
  533. [ OK ] Reached target Remote File Systems.
  534. Starting Trigger Flushing of Journal to Persistent Storage...
  535. Starting LSB: Prepare console...
  536. Starting LSB: Restore and store ALSA driver settings...
  537. [ OK ] Started Create Volatile Files and Directories.
  538. [ OK ] Started Cleanup PHP session files.
  539. [ OK ] Started Cleanup monit state file.
  540. [ OK ] Started LSB: Restore and store ALSA driver settings.
  541. [ OK ] Started Trigger Flushing of Journal to Persistent Storage.
  542. Starting Update UTMP about System Boot/Shutdown...
  543. [ OK ] Started LSB: Prepare console.
  544. Starting LSB: Set console font and keymap...
  545. [ OK ] Started Update UTMP about System Boot/Shutdown.
  546. [ OK ] Started LSB: Set console font and keymap.
  547. [ OK ] Started folder2ram systemd service.
  548. [ OK ] Started LSB: Raise network interfaces..
  549. Starting ifup for lan1...
  550. [ OK ] Started ifup for lan1.
  551. Starting ifup for lan0...
  552. [ OK ] Started ifup for lan0.
  553. Starting ifup for eth0...
  554. [ OK ] Started ifup for eth0.
  555. [ OK ] Reached target Network.
  556. [ OK ] Reached target Network is Online.
  557. Starting LSB: RPC portmapper replacement...
  558. [ OK ] Started LSB: RPC portmapper replacement.
  559. [ OK ] Reached target RPC Port Mapper.
  560. Starting LSB: NFS support files common to client and server...
  561. [ OK ] Started LSB: NFS support files common to client and server.
  562. [ OK ] Reached target System Initialization.
  563. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  564. [ OK ] Listening on D-Bus System Message Bus Socket.
  565. [ OK ] Reached target Timers.
  566. [ OK ] Listening on ACPID Listen Socket.
  567. [ OK ] Reached target Sockets.
  568. [ OK ] Reached target Paths.
  569. [ OK ] Reached target Basic System.
  570. Starting Entropy daemon using the HAVEGE algorithm...
  571. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  572. Starting OpenBSD Secure Shell server...
  573. [ OK ] Started OpenBSD Secure Shell server.
  574. Starting RPC Remote Quota Server...
  575. Starting Self Monitoring and Reporting Technology (SMART) Daemon...
  576. [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
  577. Starting System Logging Service...
  578. Starting A high performance web server and a reverse proxy server...
  579. Starting Network Manager...
  580. Starting Run anacron jobs...
  581. [ OK ] Started Run anacron jobs.
  582. Starting Avahi mDNS/DNS-SD Stack...
  583. Starting Regular background program processing daemon...
  584. [ OK ] Started Regular background program processing daemon.
  585. Starting The OpenMediaVault engine daemon that proce... RPC request...
  586. Starting The PHP FastCGI Process Manager...
  587. Starting /etc/rc.local Compatibility...
  588. Starting Permit User Sessions...
  589. Starting D-Bus System Message Bus...
  590. [ OK ] Started D-Bus System Message Bus.
  591. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  592. Starting Netatalk AFP fileserver for Macintosh clients...
  593. Starting Login Service...
  594. Starting LSB: service and resource monitoring daemon...
  595. Starting LSB: SNMP agents...
  596. Starting LSB: Start NTP daemon...
  597. Starting LSB: disk temperature monitoring daemon...
  598. Starting LSB: Starts LIRC daemon....
  599. Starting LSB: Start/stop sysstat's sadc...
  600. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  601. Starting LSB: start Samba daemons for the AD DC...
  602. Starting LSB: start Samba NetBIOS nameserver (nmbd)...
  603. Starting LSB: Starts ProFTPD daemon...
  604. Starting LSB: Advanced IEEE 802.11 management daemon...
  605. Starting ACPI event daemon...
  606. [ OK ] Started ACPI event daemon.
  607. Starting LSB: Armbian gathering hardware information...
  608. Starting LSB: Kernel NFS server support...
  609. [ OK ] Started System Logging Service.
  610. [ OK ] Started RPC Remote Quota Server.
  611. [ OK ] Started /etc/rc.local Compatibility.
  612. [ OK ] Started Permit User Sessions.
  613. [ OK ] Started LSB: disk temperature monitoring daemon.
  614. [ OK ] Started LSB: Starts LIRC daemon..
  615. [ OK ] Started LSB: Start/stop sysstat's sadc.
  616. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  617. [ OK ] Started A high performance web server and a reverse proxy server.
  618. [FAILED] Failed to start LSB: service and resource monitoring daemon.
  619. See 'systemctl status monit.service' for details.
  620. [ OK ] Started Netatalk AFP fileserver for Macintosh clients.
  621. [ OK ] Started LSB: Start NTP daemon.
  622. Starting Serial Getty on ttyS0...
  623. [ OK ] Started Serial Getty on ttyS0.
  624. Starting Getty on tty1...
  625. [ OK ] Started Getty on tty1.
  626. Starting Serial Getty on ttyMV0...
  627. [ OK ] Started Serial Getty on ttyMV0.
  628. [ OK ] Reached target Login Prompts.
  629. [ OK ] Started LSB: Kernel NFS server support.
  630. [ OK ] Started Login Service.
  631. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  632. Starting LSB: set CPUFreq kernel parameters...
  633. [ OK ] Started LSB: set CPUFreq kernel parameters.
  634. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  635. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  636. [ OK ] Started The OpenMediaVault engine daemon that proces...he RPC request.
  637. [ OK ] Started LSB: SNMP agents.
  638. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  639. [ OK ] Started LSB: Starts ProFTPD daemon.
  640. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  641. [ OK ] Started The PHP FastCGI Process Manager.
  642. [ OK ] Started Network Manager.
  643. [ OK ] Started LSB: Armbian gathering hardware information.
  644. [ OK ] Started LSB: start Samba daemons for the AD DC.
  645.  
  646. openmediavault 3.0.86 (Erasmus) espressobin ttyMV0
  647. Copyright (C) 2009-2017 by Volker Theile. All rights reserved.
  648.  
  649. To manage the system visit the openmediavault web control panel:
  650.  
  651. br0: 169.254.6.94
  652. br0: 169.254.6.94
  653.  
  654. By default the web control panel administrator account has the
  655. username 'admin' and password 'openmediavault'.
  656. It is recommended that you change the password for this account
  657. within the web control panel or using the 'omv-firstaid' CLI
  658. command.
  659.  
  660. For more information regarding this appliance, please visit the
  661. web site: http://www.openmediavault.org
  662.  
  663.  
  664. By default the web control panel administrator account has the
  665. username 'admin' and password 'openmediavault'.
  666. It is recommended that you change the password for this account
  667. within the web control panel or using the 'omv-firstaid' CLI
  668. command.
  669.  
  670. For more information regarding this appliance, please visit the
  671. web site: http://www.openmediavault.org
  672.  
  673. espressobin login: Starting Beep before system shutdown...
  674. [ OK ] Removed slice system-ifup.slice.
  675. Stopping User Manager for UID 0...
  676. Stopping Authenticate and Authorize Users to Run Privileged Tasks...
  677. Stopping ACPI event daemon...
  678. [ OK ] Stopped target Graphical Interface.
  679. Stopping Entropy daemon using the HAVEGE algorithm...
  680. [ OK ] Stopped target Multi-User System.
  681. Stopping LSB: SNMP agents...
  682. Stopping LSB: Start NTP daemon...
  683. Stopping LSB: disk temperature monitoring daemon...
  684. Stopping LSB: Starts LIRC daemon....
  685. Stopping LSB: Start/stop sysstat's sadc...
  686. Stopping LSB: start Samba daemons for the AD DC...
  687. Stopping LSB: Kernel NFS server support...
  688. Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
  689. Stopping LSB: Starts ProFTPD daemon...
  690. Stopping LSB: Advanced IEEE 802.11 management daemon...
  691. Stopping LSB: start Samba SMB/CIFS daemon (smbd)...
  692. Stopping LSB: Armbian gathering hardware information...
  693. Stopping OpenBSD Secure Shell server...
  694. Stopping A high performance web server and a reverse proxy server...
  695. Stopping Network Manager...
  696. Stopping Netatalk AFP fileserver for Macintosh clients...
  697. Stopping Run anacron jobs...
  698. Stopping Regular background program processing daemon...
  699. Stopping The OpenMediaVault engine daemon that proce... RPC request...
  700. Stopping The PHP FastCGI Process Manager...
  701. [ OK ] Stopped target Login Prompts.
  702. Stopping Serial Getty on ttyS0...
  703. Stopping Getty on tty1...
  704. Stopp Stopping D-Bus System Message Bus...
  705. Stopping System Logging Service...
  706. Starting folder2ram systemd service...
  707. Starting Unattended Upgrades...
  708. [ OK ] Stopped Entropy daemon using the HAVEGE algorithm.
  709. [ OK ] Stopped System Logging Service.
  710. [ OK ] Stopped Network Manager.
  711. [ OK ] Stopped Run anacron jobs.
  712. [ OK ] Stopped Regular background program processing daemon.
  713. [ OK ] Stopped D-Bus System Message Bus.
  714. [ OK ] Stopped ACPI event daemon.
  715. [ OK ] Stopped Netatalk AFP fileserver for Macintosh clients.
  716. [ OK ] Stopped Getty on tty1.
  717. [ OK ] Stopped Serial Getty on ttyMV0.
  718. [ OK ] Stopped The OpenMediaVault engine daemon that proces...he RPC request.
  719. [ OK ] Stopped The PHP FastCGI Process Manager.
  720. [ OK ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.
  721. [ OK ] Stopped OpenBSD Secure Shell server.
  722. [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
  723. [ OK ] Stopped Serial Getty on ttyS0.
  724. [ OK ] Started Beep before system shutdown.
  725. [ OK ] Stopped LSB: SNMP agents.
  726. [ OK ] Stopped LSB: Start NTP daemon.
  727. [ OK ] Stopped LSB: disk temperature monitoring daemon.
  728. [ OK ] Stopped LSB: Starts LIRC daemon..
  729. [ OK ] Stopped LSB: Start/stop sysstat's sadc.
  730. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
  731. [ OK ] Stopped LSB: Starts ProFTPD daemon.
  732. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon.
  733. Stopping LSB: set CPUFreq kernel parameters...
  734. Stopping Login Service...
  735. [ OK ] Removed slice system-serial\x2dgetty.slice.
  736. [ OK ] Removed slice system-getty.slice.
  737. Stopping /etc/rc.local Compatibility...
  738. [ OK ] Stopped /etc/rc.local Compatibility.
  739. [ OK ] Stopped Login Service.
  740. [ OK ] Stopped LSB: Kernel NFS server support.
  741. [ OK ] Stopped LSB: set CPUFreq kernel parameters.
  742. [ OK ] Stopped User Manager for UID 0.
  743. [ OK ] Removed slice user-0.slice.
  744. Stopping Permit User Sessions...
  745. Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
  746. [ OK ] Stopped Permit User Sessions.
  747. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
  748. [ OK ] Stopped LSB: start Samba daemons for the AD DC.
  749. [ OK ] Stopped LSB: start Samba SMB/CIFS daemon (smbd).
  750. Stopping LSB: start Samba NetBIOS nameserver (nmbd)...
  751. [ OK ] Stopped LSB: Armbian gathering hardware information.
  752. [ OK ] Unmounted /var/log.
  753. [ OK ] Unmounted /var/folder2ram/var/log.
  754. [ OK ] Started Unattended Upgrades.
  755. [ OK ] Unmounted /var/tmp.
  756. [ OK ] Unmounted /var/folder2ram/var/tmp.
  757. [ OK ] Unmounted /var/lib/openmediavault/rrd.
  758. [ OK ] Unmounted /var/folder2ram/var/lib/openmediavault/rrd.
  759. [ OK ] Unmounted /var/spool.
  760. [ OK ] Unmounted /var/folder2ram/var/spool.
  761. [ OK ] Unmounted /var/lib/rrdcached.
  762. [ OK ] Stopped LSB: start Samba NetBIOS nameserver (nmbd).
  763. [ OK ] Unmounted /var/folder2ram/var/lib/rrdcached.
  764. [ OK ] Unmounted /var/lib/monit.
  765. [ OK ] Unmounted /var/folder2ram/var/lib/monit.
  766. [ OK ] Unmounted /var/lib/php5.
  767. [ OK ] Unmounted /var/folder2ram/var/lib/php5.
  768. [ OK ] Unmounted /var/lib/netatalk/CNID.
  769. [ OK ] Unmounted /var/folder2ram/var/lib/netatalk/CNID.
  770. [ OK ] Started folder2ram systemd service.
  771. [ OK ] Stopped A high performance web server and a reverse proxy server.
  772. [ OK ] Stopped target Basic System.
  773. [ OK ] Stopped target Slices.
  774. [ OK ] Removed slice User and Session Slice.
  775. [ OK ] Stopped target Paths.
  776. [ OK ] Stopped target Timers.
  777. [ OK ] Stopped target Sockets.
  778. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
  779. [ OK ] Closed D-Bus System Message Bus Socket.
  780. [ OK ] Closed ACPID Listen Socket.
  781. [ OK ] Closed Syslog Socket.
  782. [ OK ] Stopped target System Initialization.
  783. Stopping Restore / save the current clock...
  784. Stopping LSB: Restore and store ALSA driver settings...
  785. [ OK ] Stopped target Encrypted Volumes.
  786. [ OK ] Stopped target Swap.
  787. Deactivating swap /var/swap...
  788. Stopping Update UTMP about System Boot/Shutdown...
  789. Stopping LSB: NFS support files common to client and server...
  790. [ OK ] Stopped Restore / save the current clock.
  791. [ OK ] Stopped LSB: Restore and store ALSA driver settings.
  792. [ OK ] Deactivated swap /var/swap.
  793. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  794. [ OK ] Unmounted /run/rpc_pipefs.
  795. [ OK ] Stopped LSB: NFS support files common to client and server.
  796. [ OK ] Stopped target RPC Port Mapper.
  797. Stopping LSB: RPC portmapper replacement...
  798. Stopping Create Volatile Files and Directories...
  799. [ OK ] Stopped Create Volatile Files and Directories.
  800. [ OK ] Stopped target Remote File Systems.
  801. [ OK ] Stopped target Remote File Systems (Pre).
  802. [ OK ] Stopped LSB: RPC portmapper replacement.
  803. [ OK ] Stopped target Network is Online.
  804. [ OK ] Stopped target Network.
  805. Stopping LSB: Raise network interfaces....
  806. [ OK ] Stopped LSB: Raise network interfaces..
  807. Stopping Apply Kernel Variables...
  808. [ OK ] Stopped Apply Kernel Variables.
  809. Stopping Load Kernel Modules...
  810. [ OK ] Stopped Load Kernel Modules.
  811. Stopping Load/Save Random Seed...
  812. [ OK ] Stopped target Local File Systems.
  813. Unmounting /run/user/0...
  814. Stopping Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
  815. Stopping LSB: MD array assembly...
  816. Unmounting /tmp...
  817. [ OK ] Stopped Load/Save Random Seed.
  818. [ OK ] Unmounted /run/user/0.
  819. [ OK ] Stopped LSB: MD array assembly.
  820. [ OK ] Unmounted /tmp.
  821. [ OK ] Reached target Unmount All Filesystems.
  822. [ OK ] Stopped target Local File Systems (Pre).
  823. Stopping Create Static Device Nodes in /dev...
  824. [ OK ] Stopped Create Static Device Nodes in /dev.
  825. Stopping Remount Root and Kernel File Systems...
  826. [ OK ] Stopped Remount Root and Kernel File Systems.
  827. [ OK ] Reached target Shutdown.
  828. [ 603.699893] reboot: Power down
  829. ERROR: a3700_systPANIC at PC : 0x000000000402315c
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!