Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- coreboot-4.15-670-ge226aabf79 Sun Dec 26 19:37:09 UTC 2021 bootblock starting (log level: 7)...
- FMAP: Found "FLASH" version 1.1 at 0x650000.
- FMAP: base = 0xff800000 size = 0x800000 #areas = 5
- FMAP: area COREBOOT found @ 650200 (1768960 bytes)
- CBFS: mcache @0xfeff0e00 built for 11 files, used 0x278 of 0x4000 bytes
- CBFS: Found 'fallback/romstage' @0x80 size 0x14978 in mcache @0xfeff0e2c
- BS: bootblock times (exec / console): total (unknown) / 33 ms
- coreboot-4.15-670-ge226aabf79 Sun Dec 26 19:37:09 UTC 2021 romstage starting (log level: 7)...
- Setting up local APIC 0x0
- SMBus controller enabled
- Setting up static northbridge registers... done
- Initializing Graphics...
- Back from systemagent_early_init()
- Intel ME early init
- Intel ME firmware is ready
- ME: Requested 16MB UMA
- Starting native Platform init
- DMI: Running at X4 @ 5000MT/s
- FMAP: area RW_MRC_CACHE found @ 600000 (65536 bytes)
- Stored timings CRC16 mismatch.
- ECC supported: no ECC forced: no
- ECC RAM unsupported.
- SPD probe channel0, slot0
- Not a DDR3 SPD!
- No valid XMP profile found.
- Not a DDR3 SPD!
- SPD probe channel0, slot1
- Revision : 12
- Type : b
- Key : 3
- Banks : 8
- Capacity : 4 Gb
- Supported voltages : 1.35V 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : ASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: B
- Manufacturer ID : b83
- Part number : NT4GC64C88B1NS-D
- Not a DDR3 XMP profile!
- No valid XMP profile found.
- Revision : 12
- Type : b
- Key : 3
- Banks : 8
- Capacity : 4 Gb
- Supported voltages : 1.35V 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : ASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: B
- Manufacturer ID : b83
- Part number : NT4GC64C88B1NS-D
- Row addr bits : 16
- Column addr bits : 10
- Number of ranks : 1
- DIMM Capacity : 4096 MB
- CAS latencies : 5 6 7 8 9 10 11
- tCKmin : 1.250 ns
- tAAmin : 13.125 ns
- tWRmin : 15.000 ns
- tRCDmin : 13.125 ns
- tRRDmin : 6.000 ns
- tRPmin : 13.125 ns
- tRASmin : 35.000 ns
- tRCmin : 48.125 ns
- tRFCmin : 260.000 ns
- tWTRmin : 7.500 ns
- tRTPmin : 7.500 ns
- tFAWmin : 30.000 ns
- channel[0] rankmap = 0x4
- SPD probe channel1, slot0
- Not a DDR3 SPD!
- No valid XMP profile found.
- Not a DDR3 SPD!
- SPD probe channel1, slot1
- Revision : 11
- Type : b
- Key : 2
- Banks : 8
- Capacity : 2 Gb
- Supported voltages : 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : PASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: A
- Manufacturer ID : 9801
- Part number : ACR256X64D3U16C1
- Not a DDR3 XMP profile!
- No valid XMP profile found.
- Revision : 11
- Type : b
- Key : 2
- Banks : 8
- Capacity : 2 Gb
- Supported voltages : 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : PASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: A
- Manufacturer ID : 9801
- Part number : ACR256X64D3U16C1
- Row addr bits : 15
- Column addr bits : 10
- Number of ranks : 1
- DIMM Capacity : 2048 MB
- CAS latencies : 6 7 8 9 10 11
- tCKmin : 1.250 ns
- tAAmin : 13.125 ns
- tWRmin : 15.000 ns
- tRCDmin : 13.125 ns
- tRRDmin : 6.000 ns
- tRPmin : 13.125 ns
- tRASmin : 35.000 ns
- tRCmin : 48.125 ns
- tRFCmin : 160.000 ns
- tWTRmin : 7.500 ns
- tRTPmin : 7.500 ns
- tFAWmin : 30.000 ns
- channel[1] rankmap = 0x4
- ECC is disabled
- Starting Ivy Bridge RA : 6T
- Selected tWTR : 6T
- Selected tRFC : 208T
- XOVER CLK [c14] = 4000000
- XOVER CMD [320c] = 4004000
- XOVER CLK [d14] = 4000000
- XOVER CMD [330c] = 4004000
- DBP [4000] = 1c8bbb
- RAP [4004] = cc186465
- OTHP [400c] = 68b4
- OTHP [400c] = 68b4
- REFI [4298] = 6cd01860
- SRFTP [42a4] = 41f88200
- DBP [4400] = 1c8bbb
- RAP [4404] = cc186465
- OTHP [440c] = 68b4
- OTHP [440c] = 68b4
- REFI [4698] = 6cd01860
- SRFTP [46a4] = 41f88200
- Done dimm mapping
- Update PCI-E configuration space:
- PCI(0, 0, 0)[a0] = 80000000
- PCI(0, 0, 0)[a4] = 1
- PCI(0, 0, 0)[bc] = 82a00000
- PCI(0, 0, 0)[a8] = fc600000
- PCI(0, 0, 0)[ac] = 1
- PCI(0, 0, 0)[b8] = 80000000
- PCI(0, 0, 0)[b0] = 80a00000
- PCI(0, 0, 0)[b4] = 80800000
- PCI(0, 0, 0)[7c] = 7f
- PCI(0, 0, 0)[70] = 7f000000
- PCI(0, 0, 0)[74] = 1
- PCI(0, 0, 0)[78] = ff000c00
- Done memory map
- RCOMP...done
- COMP2 done
- COMP1 done
- FORCE RCOMP and wait 20us...done
- Done io registers
- Done jedec reset
- Done MRS commands
- rcven: 0, 2, 0: 66- 96- 126
- rcven: 0, 2, 1: 62- 93- 124
- rcven: 0, 2, 2: 82- 112- 14
- rcven: 0, 2, 3: 72- 100- 0
- rcven: 0, 2, 4: 103- 5- 36
- rcven: 0, 2, 5: 112- 16- 48
- rcven: 0, 2, 6: 126- 29- 60
- rcven: 0, 2, 7: 7- 35- 64
- 4024++;
- 4028++;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4028 += 2;
- increment 0, 2, 4
- increment 0, 2, 5
- increment 0, 2, 6
- increment 0, 2, 7
- 4024 += 0;
- 4028 += 0;
- lane 0: -4, 2
- Aval: 0, 2, 0: 125
- lane 1: -9, 1
- Aval: 0, 2, 1: 120
- lane 2: -7, 3
- Aval: 0, 2, 2: 140
- lane 3: -1, 9
- Aval: 0, 2, 3: 132
- lane 4: -5, 2
- Aval: 0, 2, 4: 163
- lane 5: -9, 0
- Aval: 0, 2, 5: 172
- lane 6: -9, 0
- Aval: 0, 2, 6: 184
- lane 7: -3, 7
- Aval: 0, 2, 7: 194
- 4024 += 1;
- 4028 += 1;
- 4028 -= 1;
- 4024 += 0;
- 4028 += 0;
- 4/8: 0, 2, 49, 7
- final results:
- Aval: 0, 2, 0: 61
- Aval: 0, 2, 1: 56
- Aval: 0, 2, 2: 76
- Aval: 0, 2, 3: 68
- Aval: 0, 2, 4: 99
- Aval: 0, 2, 5: 108
- Aval: 0, 2, 6: 120
- Aval: 0, 2, 7: 130
- rcven: 1, 2, 0: 32- 62- 92
- rcven: 1, 2, 1: 51- 81- 112
- rcven: 1, 2, 2: 61- 91- 122
- rcven: 1, 2, 3: 78- 109- 12
- rcven: 1, 2, 4: 103- 4- 33
- rcven: 1, 2, 5: 120- 22- 53
- rcven: 1, 2, 6: 9- 41- 74
- rcven: 1, 2, 7: 24- 54- 84
- 4024++;
- 4028++;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4028 += 2;
- increment 1, 2, 4
- increment 1, 2, 5
- increment 1, 2, 6
- increment 1, 2, 7
- 4024 += 1;
- 4028 += 1;
- lane 0: 2, 6
- Aval: 1, 2, 0: 96
- lane 1: -2, 4
- Aval: 1, 2, 1: 113
- lane 2: -1, 5
- Aval: 1, 2, 2: 124
- lane 3: -4, 3
- Aval: 1, 2, 3: 140
- lane 4: 0, 7
- Aval: 1, 2, 4: 164
- lane 5: -1, 5
- Aval: 1, 2, 5: 183
- lane 6: -6, 1
- Aval: 1, 2, 6: 200
- lane 7: -1, 5
- Aval: 1, 2, 7: 214
- 4024 += 0;
- 4028 += 0;
- 4028 -= 1;
- 4024 += 0;
- 4028 += 0;
- 4/8: 1, 2, 49, 7
- final results:
- Aval: 1, 2, 0: 32
- Aval: 1, 2, 1: 49
- Aval: 1, 2, 2: 60
- Aval: 1, 2, 3: 76
- Aval: 1, 2, 4: 100
- Aval: 1, 2, 5: 119
- Aval: 1, 2, 6: 136
- Aval: 1, 2, 7: 150
- discover falling edges:
- [4eb0] = 300
- eval 0, 2, 0: 42
- eval 0, 2, 1: 42
- eval 0, 2, 2: 41
- eval 0, 2, 3: 35
- eval 0, 2, 4: 40
- eval 0, 2, 5: 42
- eval 0, 2, 6: 42
- eval 0, 2, 7: 43
- eval 1, 2, 0: 36
- eval 1, 2, 1: 37
- eval 1, 2, 2: 37
- eval 1, 2, 3: 37
- eval 1, 2, 4: 37
- eval 1, 2, 5: 40
- eval 1, 2, 6: 37
- eval 1, 2, 7: 38
- discover rising edges:
- [4eb0] = 200
- Read MPR training failed: 0, 2, 0
- RAM training failed, trying fallback.
- Disable failing channel.
- ECC supported: no ECC forced: no
- SPD probe channel0, slot0
- Not a DDR3 SPD!
- No valid XMP profile found.
- Not a DDR3 SPD!
- SPD probe channel0, slot1
- Revision : 12
- Type : b
- Key : 3
- Banks : 8
- Capacity : 4 Gb
- Supported voltages : 1.35V 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : ASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: B
- Manufacturer ID : b83
- Part number : NT4GC64C88B1NS-D
- Not a DDR3 XMP profile!
- No valid XMP profile found.
- Revision : 12
- Type : b
- Key : 3
- Banks : 8
- Capacity : 4 Gb
- Supported voltages : 1.35V 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : ASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: B
- Manufacturer ID : b83
- Part number : NT4GC64C88B1NS-D
- Row addr bits : 16
- Column addr bits : 10
- Number of ranks : 1
- DIMM Capacity : 4096 MB
- CAS latencies : 5 6 7 8 9 10 11
- tCKmin : 1.250 ns
- tAAmin : 13.125 ns
- tWRmin : 15.000 ns
- tRCDmin : 13.125 ns
- tRRDmin : 6.000 ns
- tRPmin : 13.125 ns
- tRASmin : 35.000 ns
- tRCmin : 48.125 ns
- tRFCmin : 260.000 ns
- tWTRmin : 7.500 ns
- tRTPmin : 7.500 ns
- tFAWmin : 30.000 ns
- channel[0] rankmap = 0x4
- SPD probe channel1, slot0
- Not a DDR3 SPD!
- No valid XMP profile found.
- Not a DDR3 SPD!
- SPD probe channel1, slot1
- Revision : 11
- Type : b
- Key : 2
- Banks : 8
- Capacity : 2 Gb
- Supported voltages : 1.5V
- SDRAM width : 8
- Bus extension : 0 bits
- Bus width : 64
- FTB timings : yes
- Optional features : DLL-Off_mode RZQ/7 RZQ/6
- Thermal features : PASR ext_temp_range
- Thermal sensor : no
- Standard SDRAM : yes
- Rank1 Address bits : normal
- DIMM Reference card: A
- Manufacturer ID : 9801
- Part number : ACR256X64D3U16C1
- Not a DDR3 XMP profile!
- No valid XMP profile found.
- Revision : 11
- Type : b
- Key : 2
- Banks mber of ranks : 1
- DIMM Capacity : 2048 MB
- CAS latencies : 6 7 8 9 10 11
- tCKmin : 1.250 ns
- tAAmin : 13.125 ns
- tWRmin : 15.000 ns
- tRCDmin : 13.125 ns
- tRRDmin : 6.000 ns
- tRPmin : 13.125 ns
- tRASmin : 35.000 ns
- tRCmin : 48.125 ns
- tRFCmin : 160.000 ns
- tWTRmin : 7.500 ns
- tRTPmin : 7.500 ns
- tFAWmin : 30.000 ns
- channel[1] rankmap = 0x4
- ECC is disabled
- Starting Ivy Bridge RAM training (full initialization).
- 100MHz reference clock support: yes
- PLL_REF100_CFG value: 0x2
- Trying CAS 11, tCK 320.
- Found compatible clock, CAS pair.
- Selected DRAM frequency: 800 MHz
- Selected CAS latency : 11T
- Selected CWL latency : 8T
- Selected tRCD : 11T
- Selected tRP : 11T
- Selected tRAS : 28T
- Selected tWR : 12T
- Selected tFAW : 24T
- Selected tRRD : 5T
- Selected tRTP : 6T
- Selected tWTR : 6T
- Selected tRFC : 128T
- XOVER CLK [c14] = 0
- XOVER CMD [320c] = 4000
- XOVER CLK [d14] = 4000000
- XOVER CMD [330c] = 4004000
- DBP [4000] = 1c8bbb
- RAP [4004] = cc186465
- OTHP [400c] = 68b4
- OTHP [400c] = 68b4
- REFI [4298] = 6c801860
- SRFTP [42a4] = 41f88200
- DBP [4400] = 1c8bbb
- RAP [4404] = cc186465
- OTHP [440c] = 68b4
- OTHP [440c] = 68b4
- REFI [4698] = 6c801860
- SRFTP [46a4] = 41f88200
- Done dimm mapping
- Update PCI-E configuration space:
- PCI(0, 0, 0)[a0] = 80000000
- PCI(0, 0, 0)[a4] = 0
- PCI(0, 0, 0)[bc] = 7ea00000
- PCI(0, 0, 0)[a8] = 600000
- PCI(0, 0, 0)[ac] = 1
- PCI(0, 0, 0)[b8] = 7c000000
- PCI(0, 0, 0)[b0] = 7ca00000
- PCI(0, 0, 0)[b4] = 7c800000
- PCI(0, 0, 0)[7c] = 7f
- PCI(0, 0, 0)[70] = 7f000000
- PCI(0, 0, 0)[74] = 0
- PCI(0, 0, 0)[78] = ff000c00
- Done memory map
- RCOMP...done
- COMP2 done
- COMP1 done
- FORCE RCOMP and wait 20us...done
- Done io registers
- Done jedec reset
- Done MRS commands
- rcven: 1, 2, 0: 32- 63- 94
- rcven: 1, 2, 1: 54- 83- 112
- rcven: 1, 2, 2: 61- 92- 123
- rcven: 1, 2, 3: 76- 106- 9
- rcven: 1, 2, 4: 102- 5- 36
- rcven: 1, 2, 5: 120- 23- 54
- rcven: 1, 2, 6: 9- 41- 74
- rcven: 1, 2, 7: 24- 54- 85
- 4024++;
- 4028++;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4024 -= 2;
- 4028 += 2;
- increment 1, 2, 4
- increment 1, 2, 5
- increment 1, 2, 6
- increment 1, 2, 7
- 4024 += 1;
- 4028 += 1;
- lane 0: -2, 5
- Aval: 1, 2, 0: 95
- lane 1: -2, 4
- Aval: 1, 2, 1: 113
- lane 2: -3, 3
- Aval: 1, 2, 2: 123
- lane 3: -1, 6
- Aval: 1, 2, 3: 139
- lane 4: -3, 5
- Aval: 1, 2, 4: 165
- lane 5: -2, 3
- Aval: 1, 2, 5: 182
- lane 6: -6, 1
- Aval: 1, 2, 6: 200
- lane 7: -3, 4
- Aval: 1, 2, 7: 213
- 4024 += 0;
- 4028 += 0;
- 4028 -= 1;
- 4024 += 0;
- 4028 += 0;
- 4/8: 1, 2, 49, 7
- final results:
- Aval: 1, 2, 0: 31
- Aval: 1, 2, 1: 49
- Aval: 1, 2, 2: 59
- Aval: 1, 2, 3: 75
- Aval: 1, 2, 4: 101
- Aval: 1, 2, 5: 118
- Aval: 1, 2, 6: 136
- Aval: 1, 2, 7: 149
- discover falling edges:
- [4eb0] = 300
- Read MPR training failed: 1, 2, 0
- raminit failed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement