Linux version 2.6.26-1-486-vyatta (root@vyatta) (gcc version 4.2.3 (Debian 4.2.3-2)) #1 SMP Fri Feb 27 01:04:20 GMT 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
 BIOS-e820: 000000003f7f0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at [c00faa60] 000faa60
Entering add_active_range(0, 0, 260080) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   260080
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   260080
On node 0 totalpages: 260080
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 240 pages used for memmap
  HighMem zone: 30464 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000EA410, 0014 (r0 COMPAQ)
ACPI: RSDT 000E5E40, 007C (r1 COMPAQ CPQ0064  20030710             0)
ACPI: FACP 000E5EF8, 0074 (r1 COMPAQ SPRINGD         1             0)
ACPI: DSDT 000E6008, 0D7D (r1 COMPAQ     DSDT        1 MSFT  100000E)
ACPI: FACS 000E5E00, 0040
ACPI: SSDT 000E6D85, 05FE (r1 COMPAQ  PROJECT        1 MSFT  100000E)
ACPI: SSDT 000E7383, 053A (r1 COMPAQ CORE_PNP        1 MSFT  100000E)
ACPI: SSDT 000E78BD, 01F2 (r1 COMPAQ CORE_UTL        1 MSFT  100000E)
ACPI: SSDT 000E7AAF, 032E (r1 COMPAQ VILLTBL1        1 MSFT  100000E)
ACPI: SSDT 000E7DDD, 053F (r1 COMPAQ LGCYLITE        1 MSFT  100000E)
ACPI: SSDT 000E831C, 0167 (r1 COMPAQ    UART2        1 MSFT  100000E)
ACPI: SSDT 000E8483, 014E (r1 COMPAQ   FLOPPY        1 MSFT  100000E)
ACPI: APIC 000E5F6C, 0068 (r1 COMPAQ SPRINGD         1             0)
ACPI: SSDT 000EA16D, 00B2 (r1 COMPAQ     APIC        1 MSFT  100000E)
ACPI: ASF! 000E5FD4, 0034 (r16 COMPAQ SPRINGD         1             0)
ACPI: SSDT 000E8A3F, 040F (r1 COMPAQ PNP_PRSS        1 MSFT  100000E)
ACPI: SSDT 000E8E4E, 016D (r1 COMPAQ UR2_PRSS        1 MSFT  100000E)
ACPI: SSDT 000E8FBB, 0119 (r1 COMPAQ FPY_PRSS        1 MSFT  100000E)
ACPI: SSDT 000E9189, 0167 (r1 COMPAQ       S3        1 MSFT  100000E)
ACPI: SSDT 000E92F0, 00E3 (r1 COMPAQ  CORE_S3        1 MSFT  100000E)
ACPI: SSDT 000E93D3, 013E (r1 COMPAQ   PIDETM        1 MSFT  100000E)
ACPI: SSDT 000E9955, 016B (r1 COMPAQ     GTF0        1 MSFT  100000E)
ACPI: SSDT 000E9511, 0143 (r1 COMPAQ   SIDETM        1 MSFT  100000E)
ACPI: SSDT 000E9C30, 0170 (r1 COMPAQ     GTF2        1 MSFT  100000E)
ACPI: SSDT 000E9F10, 00F0 (r1 COMPAQ      L08        1 MSFT  100000E)
ACPI: SSDT 000EA371, 0054 (r1 COMPAQ    FINIS        1 MSFT  100000E)
ACPI: DMI detected: Hewlett-Packard
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 39208 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258048
Kernel command line: BOOT_IMAGE=/boot/vmlinuz quiet root=UUID=c2cb8ca0-e40a-423a-b28d-055969e89b19 ro vga=785 console=ttyS0,9600 console=tty0
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2394.197 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1018628k/1040320k available (2127k kernel code, 20932k reserved, 1046k data, 368k init, 122816k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0421000 - 0xc047d000   ( 368 kB)
      .data : 0xc0313cd9 - 0xc0419888   (1046 kB)
      .text : 0xc0100000 - 0xc0313cd9   (2127 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4794.07 BogoMIPS (lpj=9588142)
Security Framework initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (4794.07 BogoMIPS).
net_namespace: 636 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.20 entry at 0xec5a9, last bus=6
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x400-0x41f has been reserved
system 00:0c: ioport range 0x420-0x43f has been reserved
system 00:0c: ioport range 0x440-0x45f has been reserved
system 00:0c: ioport range 0x460-0x47f has been reserved
system 00:0c: ioport range 0xf800-0xf81f has been reserved
system 00:0c: ioport range 0xf820-0xf83f has been reserved
system 00:0c: ioport range 0xf840-0xf85f has been reserved
system 00:0c: ioport range 0xf860-0xf87f has been reserved
system 00:0c: ioport range 0xfa00-0xfa3f has been reserved
system 00:0c: ioport range 0xfc00-0xfc7f could not be reserved
system 00:0c: ioport range 0xfc80-0xfcff has been reserved
system 00:0c: ioport range 0xfe00-0xfe7f has been reserved
system 00:0c: ioport range 0xfe80-0xfeff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0x3f7fffff could not be reserved
system 00:0d: iomem range 0x3f800000-0x3f8fffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0xfec01000-0xffffffff could not be reserved
system 00:0d: iomem range 0xcc600-0xdffff has been reserved
PCI: Bridge: 0000:05:09.0
  IO window: 1000-1fff
  MEM window: 0xf8600000-0xf89fffff
  PREFETCH window: 0x0000000050000000-0x00000000500fffff
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: 0xf8600000-0xf8cfffff
  PREFETCH window: 0x0000000050000000-0x00000000500fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 7786k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1314993820.904:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1765
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 1200k, total 8000k
vesafb: mode is 640x480x16, linelength=1280, pages=12
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.1.0 Feb 27 2009
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 368k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
No dock devices found.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
SCSI subsystem initialized
starfire.c:v1.03 7/26/2000  Written by Donald Becker <becker@scyld.com>
 (unofficial 2.2/2.4 kernel port, version 2.0, June 27, 2006)
starfire: polling (NAPI) enabled
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8d80000
Floppy drive(s): fd0 is 1.44M
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
FDC 0 is a post-1991 82077
pata_acpi 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
tg3.c:v3.92.1 (June 9, 2008)
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 20
eth0: Tigon3 [partno(BCM95782A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0d:9d:d7:91:b8
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: Adaptec Starfire 6915 at f8a80000, 00:00:d1:f1:11:2d, IRQ 18.
eth1: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth1: scatter-gather and hardware TCP cksumming enabled.
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21
eth2: Adaptec Starfire 6915 at f8b80000, 00:00:d1:f1:11:2e, IRQ 21.
eth2: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth2: scatter-gather and hardware TCP cksumming enabled.
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 22
eth3: Adaptec Starfire 6915 at f8c80000, 00:00:d1:f1:11:2f, IRQ 22.
eth3: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth3: scatter-gather and hardware TCP cksumming enabled.
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 16 (level, low) -> IRQ 16
eth4: Adaptec Starfire 6915 at f8d80000, 00:00:d1:f1:11:30, IRQ 16.
eth4: MII PHY found at address 1, status 0x7809 advertising 0x01e1.
eth4: scatter-gather and hardware TCP cksumming enabled.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24c8 irq 15
usb 4-5: new high speed USB device using ehci_hcd and address 2
ata1.00: ATA-5: WDC WD400EB-11CPF0, 06.04G06, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
usb 4-5: configuration #1 chosen from 1 choice
hub 4-0:1.0: over-current change on port 7
ata2.00: ATAPI: LITE-ON LTR-48246S, SPS3, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      WDC WD400EB-11CP 06.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            LITE-ON  LTR-48246S       SPS3 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0x24f8 ctl 0x2810 bmdma 0x24d0 irq 18
ata4: SATA max UDMA/133 cmd 0x2800 ctl 0x2814 bmdma 0x24d8 irq 18
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<4>Driver 'sr' needs updating - please use bus_type methods
 sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3064.000 MB/sec
xor: using function: pIII_sse (3064.000 MB/sec)
async_tx: api initialized (async)
raid6: int32x1    620 MB/s
raid6: int32x2    753 MB/s
raid6: int32x4    920 MB/s
raid6: int32x8    556 MB/s
raid6: mmxx1     1972 MB/s
raid6: mmxx2     2512 MB/s
raid6: sse1x1    1177 MB/s
raid6: sse1x2    2204 MB/s
raid6: sse2x1    1657 MB/s
raid6: sse2x2    2701 MB/s
raid6: using algorithm sse2x2 (2701 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 15695871 512-byte hardware sectors (8036 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 15695871 512-byte hardware sectors (8036 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
Linux agpgart interface v0.103
agpgart: Detected an Intel 865 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PBTN]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PC Speaker as /class/input/input3
logips2pp: Detected unknown logitech mouse model 2
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
intel8x0_measure_ac97_clock: measured 53800 usecs
intel8x0: clocking to 48000
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
EXT3 FS on sda1, internal journal
IPv4 FIB: Using LC-trie version 0.408