Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- user:main $ avrdude -c usbasp -P usb -p attiny13 -u -U hfuse:w:0xfe:m
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.00s
- avrdude: Device signature = 0x1e9007 (probably t13)
- avrdude: reading input file "0xfe"
- avrdude: writing hfuse (1 bytes):
- Writing | | 0% 0.00s ***failed;
- Writing | ################################################## | 100% 0.03s
- avrdude: 1 bytes of hfuse written
- avrdude: verifying hfuse memory against 0xfe:
- avrdude: load data hfuse data from input file 0xfe:
- avrdude: input file 0xfe contains 1 bytes
- avrdude: reading on-chip hfuse data:
- Reading | ################################################## | 100% 0.00s
- avrdude: verifying ...
- avrdude: verification error, first mismatch at byte 0x0000
- 0xff != 0xfe
- avrdude: verification error; content mismatch
- avrdude done. Thank you.
- user:main $ avrdude -c usbasp -P usb -p attiny13
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.00s
- avrdude: Device signature = 0x1e9007 (probably t13)
- avrdude: safemode: Fuses OK (E:FF, H:FF, L:7A)
- avrdude done. Thank you.
- < power cycle >
- user:main $ avrdude -c usbasp -P usb -p attiny13
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.00s
- avrdude: Device signature = 0x1e9007 (probably t13)
- avrdude: safemode: Fuses OK (E:FF, H:FF, L:7A)
- avrdude done. Thank you.
- user:main $ avrdude -c usbasp -P usb -p attiny13 -U flash:w:main.hex
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.00s
- avrdude: Device signature = 0x1e9007 (probably t13)
- avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
- To disable this feature, specify the -D option.
- avrdude: erasing chip
- avrdude: warning: cannot set sck period. please check for usbasp firmware update.
- avrdude: reading input file "main.hex"
- avrdude: input file main.hex auto detected as Intel Hex
- avrdude: writing flash (394 bytes):
- Writing | ################################################## | 100% 0.32s
- avrdude: 394 bytes of flash written
- avrdude: verifying flash memory against main.hex:
- avrdude: load data flash data from input file main.hex:
- avrdude: input file main.hex auto detected as Intel Hex
- avrdude: input file main.hex contains 394 bytes
- avrdude: reading on-chip flash data:
- Reading | ################################################## | 100% 0.22s
- avrdude: verifying ...
- avrdude: 394 bytes of flash verified
- avrdude: safemode: Fuses OK (E:FF, H:FF, L:7A)
- avrdude done. Thank you.
- user:main $ avrdude -c usbasp -P usb -p attiny13 -u -U hfuse:w:0xfe:m
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.00s
- avrdude: Device signature = 0x1e9007 (probably t13)
- avrdude: reading input file "0xfe"
- avrdude: writing hfuse (1 bytes):
- Writing | ################################################## | 100% 0.01s
- avrdude: 1 bytes of hfuse written
- avrdude: verifying hfuse memory against 0xfe:
- avrdude: load data hfuse data from input file 0xfe:
- avrdude: input file 0xfe contains 1 bytes
- avrdude: reading on-chip hfuse data:
- Reading | ################################################## | 100% 0.00s
- avrdude: verifying ...
- avrdude: 1 bytes of hfuse verified
- avrdude done. Thank you.
- user:main $ avrdude -c usbasp -P usb -p attiny13
- avrdude: error: program enable: target doesn't answer. 1
- avrdude: initialization failed, rc=-1
- Double check connections and try again, or use -F to override
- this check.
- avrdude done. Thank you.
- user:main $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement