dmesg UT Recovery (missing dev to mount)

<6>[    0.000000] Booting Linux on physical CPU 0

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 3.4.0-5-flo (buildd@kishi14) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu2) ) #1-Ubuntu SMP PREEMPT Thu Sep 3 14:21:37 UTC 2015

<4>[    0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d

<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

<4>[    0.000000] Machine: QCT APQ8064 FLO

<2>[    0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space

<6>[    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized

<6>[    0.000000] Initialized persistent memory from 88d00000-88dfffff

<6>[    0.000000] cma: CMA: reserved 16 MiB at af800000

<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc

<6>[    0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536

<6>[    0.000000]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4

<7>[    0.000000] On node 0 totalpages: 482303

<7>[    0.000000]   Normal zone: 1556 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 161772 pages, LIFO batch:31

<7>[    0.000000]   HighMem zone: 2536 pages used for memmap

<7>[    0.000000]   HighMem zone: 316439 pages, LIFO batch:31

<6>[    0.000000] allocating 44236800 bytes at c28fa000 (82afa000 physical) for fb

<6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c532d000 s15680 r8192 d12992 u36864

<7>[    0.000000] pcpu-alloc: s15680 r8192 d12992 u36864 alloc=9*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478211

<5>[    0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=0a1bb046 bootreason=Reboot fuse_info=Y ddr_vendor=elpida androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.08

<6>[    0.000000] HW Revision: ASUSTek input rev_e

<6>[    0.000000] HW Revision: ASUSTek matched rev_e

<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Memory: 140MB 58MB 4MB 7MB 254MB 1420MB = 1883MB total

<5>[    0.000000] Memory: 1827564k/1947372k available, 101648k reserved, 1275900K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .text : 0xc0008000 - 0xc0e4c99c   (14611 kB)

<5>[    0.000000]       .init : 0xc0f00000 - 0xc1003d40   (1040 kB)

<5>[    0.000000]       .data : 0xc1004000 - 0xc1143d60   (1280 kB)

<5>[    0.000000]        .bss : 0xc1143d84 - 0xc1440ee4   (3061 kB)

<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:1177

<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] console [tty0] enabled

<6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67667)

<6>[    0.150238] pid_max: default: 32768 minimum: 301

<6>[    0.150512] Security Framework initialized

<6>[    0.150604] AppArmor: AppArmor initialized

<6>[    0.150634] Yama: becoming mindful.

<6>[    0.150787] Mount-cache hash table entries: 512

<6>[    0.152069] Initializing cgroup subsys debug

<6>[    0.152099] Initializing cgroup subsys cpuacct

<6>[    0.152130] Initializing cgroup subsys freezer

<6>[    0.152160] CPU: Testing write buffer coherency: ok

<6>[    0.152404] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>[    0.152435] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available

<6>[    0.152557] Setting up static identity map for 0x80b5a498 - 0x80b5a520

<6>[    0.155059] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>[    0.157073] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

<6>[    0.158782] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

<6>[    0.158905] Brought up 4 CPUs

<6>[    0.158966] SMP: Total of 4 processors activated (54.13 BogoMIPS).

<6>[    0.160461] devtmpfs: initialized

<6>[    0.172393] EVM: security.selinux

<6>[    0.172424] EVM: security.SMACK64

<6>[    0.172424] EVM: security.capability

<6>[    0.174224] dummy:

<6>[    0.175598] NET: Registered protocol family 16

<6>[    0.182098] DMA: preallocated 1792 KiB pool for atomic coherent allocations

<3>[    0.182434] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

<5>[    0.185943] MIDR      = 0x511f06f0

<6>[    0.186004] meminfo_init: smem ram ptable found: ver: 0 len: 5

<6>[    0.186035] Found 1 memory banks grouped into 8 memory regions

<6>[    0.186401] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio

<6>[    0.187286] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536

<6>[    0.187316]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4

<6>[    0.187408] msm_rpm_init: RPM firmware 3.0.16842936

<3>[    0.206817] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206848] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206878] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206878] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206909] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206939] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206939] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.206970] msm_rpm_get_status(): Status id 433 not defined for target

<6>[    0.222045] ASUSTek: Bypassing PCB_ID3

<6>[    0.222106] ASUSTek: PCBID=141

<6>[    0.223083] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en

<6>[    0.223327] pm8921_probe: PMIC revision 1: F4

<6>[    0.223327] pm8921_probe: PMIC revision 2: 06

<6>[    0.223358] pm8921_probe: PMIC version: PM8921 rev 3.0

<6>[    0.223388] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)

<6>[    0.224456] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio

<6>[    0.224975] pm_gpio_probe: OK: base=152, ngpio=44

<6>[    0.225280] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp

<6>[    0.225372] pm8xxx_mpp_probe: OK: base=196, ngpio=12

<6>[    0.227111] pm8821_probe: PMIC revision 1: PM8821 rev F3

<6>[    0.227142] pm8821_probe: PMIC revision 2: PM8821 rev 0B

<6>[    0.227172] pm8821_probe: PMIC version: PM8821 ver 2.1

<6>[    0.227722] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp

<6>[    0.227752] pm8xxx_mpp_probe: OK: base=208, ngpio=4

<3>[    0.228088] gpio_vreg_probe: gpio_label required.

<4>[    0.228118] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22

<6>[    0.229278] saw_probe: id=0, name=8921_s5

<6>[    0.229614] saw_probe: id=1, name=8921_s6

<6>[    0.229949] saw_probe: id=2, name=8821_s0

<6>[    0.230346] saw_probe: id=3, name=8821_s1

<3>[    0.238128] Sensors:DSPS: initial dsps.

<4>[    0.239044] [ELAN] Touch dirver register

<6>[    0.239349] persistent_ram: found existing buffer, size 37817, start 37817

<6>[    0.357879] console [ram-1] enabled

<4>[    0.358459] apq8064_init_fb: lcd_type=0

<6>[    0.358642] apq8064_init_fb: register mipi_JDI_panel_device

<3>[    0.359985] msm_gpiomux_install: write failure: -22

<3>[    0.360107] msm_gpiomux_install: write failure: -22

<3>[    0.360260] msm_gpiomux_install: write failure: -22

<3>[    0.360382] msm_gpiomux_install: write failure: -22

<3>[    0.360473] msm_gpiomux_install: write failure: -22

<3>[    0.360656] msm_gpiomux_install: write failure: -22

<6>[    0.361511] Registering gpio keys

<6>[    0.361694] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC

<4>[    0.361938] 8921_l17: Failed to create debugfs directory

<4>[    0.363586] ------------[ cut here ]------------

<4>[    0.363677] WARNING: at /build/linux-flo-iEq0Rz/linux-flo-3.4.0/arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x104()

<4>[    0.363891] Modules linked in:

<4>[    0.364105] [<c00151b0>] (unwind_backtrace+0x0/0x11c) from [<c0079de8>] (warn_slowpath_common+0x4c/0x64)

<4>[    0.364288] [<c0079de8>] (warn_slowpath_common+0x4c/0x64) from [<c0079e18>] (warn_slowpath_null+0x18/0x1c)

<4>[    0.364471] [<c0079e18>] (warn_slowpath_null+0x18/0x1c) from [<c0f0c13c>] (subsys_restart_init+0xd8/0x104)

<4>[    0.364685] [<c0f0c13c>] (subsys_restart_init+0xd8/0x104) from [<c000871c>] (do_one_initcall+0x90/0x160)

<4>[    0.364868] [<c000871c>] (do_one_initcall+0x90/0x160) from [<c0f00a24>] (kernel_init+0xe8/0x1a4)

<4>[    0.365051] [<c0f00a24>] (kernel_init+0xe8/0x1a4) from [<c000f894>] (kernel_thread_exit+0x0/0x8)

<4>[    0.365203] ---[ end trace cc31ec72069605f0 ]---

<6>[    0.368988] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20

<6>[    0.369110] sps:BAM 0x12244000 is registered.

<6>[    0.369781] sps:sps is ready.

<6>[    0.400665] bio: create slab <bio-0> at 0

<6>[    0.401489] vgaarb: loaded

<6>[    0.401916] ION heap vmalloc created

<6>[    0.402038] ION heap mm created at a0000000 with size 5c00000

<6>[    0.402160] ION heap mm_fw created at 9fe00000 with size 1e0000

<6>[    0.402343] ION heap mfc created at a5c00000 with size 2000

<6>[    0.402465] ION heap iommu created

<6>[    0.402679] ION heap qsecom created at fea07000 with size 780000

<6>[    0.402801] ION heap audio created at ff187000 with size 4cf000

<5>[    0.404083] pm8xxx_pwm_probe: OK

<5>[    0.404846] SCSI subsystem initialized

<6>[    0.405242] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31

<6>[    0.405426] sps:BAM 0x28084000 is registered.

<6>[    0.408966] usbcore: registered new interface driver usbfs

<6>[    0.409332] usbcore: registered new interface driver hub

<6>[    0.409576] usbcore: registered new device driver usb

<6>[    0.409912] Linux media interface: v0.10

<6>[    0.410095] Linux video capture interface: v2.00

<7>[    0.410522] Registered led device: white

<6>[    0.411254] apq8064_pm8921_pwm_init+

<6>[    0.411499] apq8064_pm8921_pwm_init-

<6>[    0.412261] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks

<6>[    0.412567] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks

<6>[    0.412780] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks

<6>[    0.413085] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks

<6>[    0.413391] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks

<6>[    0.413604] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks

<6>[    0.413879] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks

<6>[    0.414123] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks

<6>[    0.414428] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks

<6>[    0.414733] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks

<6>[    0.414947] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks

<6>[    0.415252] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks

<6>[    0.415832] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0

<6>[    0.416046] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1

<6>[    0.416381] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0

<6>[    0.416656] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1

<6>[    0.416961] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0

<6>[    0.417327] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1

<6>[    0.417572] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0

<6>[    0.417877] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1

<6>[    0.418151] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0

<6>[    0.418457] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1

<6>[    0.418792] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0

<6>[    0.419036] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1

<6>[    0.419342] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0

<6>[    0.419708] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1

<6>[    0.419982] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0

<6>[    0.420379] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0

<6>[    0.420715] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1

<6>[    0.421020] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0

<6>[    0.421325] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1

<6>[    0.421661] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0

<6>[    0.422058] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1

<6>[    0.422302] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0

<6>[    0.422607] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1

<6>[    0.422882] Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>[    0.423767] cfg80211: Calling CRDA to update world regulatory domain

<6>[    0.423980] cfg80211: World regulatory domain updated:

<6>[    0.424072] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

<6>[    0.424255] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.424438] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.424530] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

<6>[    0.424713] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.424896] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

<6>[    0.425140] NetLabel: Initializing

<6>[    0.425323] NetLabel:  domain hash size = 128

<6>[    0.425415] NetLabel:  protocols = UNLABELED CIPSOv4

<6>[    0.425628] NetLabel:  unlabeled traffic allowed by default

<6>[    0.425933] Loading modules backported from Linux version v4.2-rc7-0-g2c6625c

<6>[    0.426116] Backport integrated by backports.git v4.2-rc1-1-3-g0d0798b

<6>[    0.426208] Bluetooth: Core ver 2.20

<6>[    0.426422] NET: Registered protocol family 31

<6>[    0.426544] Bluetooth: HCI device and connection manager initialized

<6>[    0.426635] Bluetooth: HCI socket layer initialized

<6>[    0.426818] Bluetooth: L2CAP socket layer initialized

<6>[    0.426971] Bluetooth: SCO socket layer initialized

<6>[    0.427886] Switching to clocksource gp_timer

<6>[    0.454284] AppArmor: AppArmor Filesystem Enabled

<6>[    0.466674] NET: Registered protocol family 2

<6>[    0.467071] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.467803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>[    0.469146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.469970] TCP: Hash tables configured (established 131072 bind 65536)

<6>[    0.470062] TCP: reno registered

<6>[    0.470245] UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.470367] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.470886] NET: Registered protocol family 1

<6>[    0.471496] RPC: Registered named UNIX socket transport module.

<6>[    0.471679] RPC: Registered udp transport module.

<6>[    0.471771] RPC: Registered tcp transport module.

<6>[    0.471923] RPC: Registered tcp NFSv4.1 backchannel transport module.

<7>[    0.472045] PCI: CLS 0 bytes, default 64

<6>[    0.472290] Trying to unpack rootfs image as initramfs...

<6>[    0.626892] Freeing initrd memory: 3044K

<6>[    0.628387] Detected 9 counters on the L2CC PMU.

<6>[    0.629882] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot

<6>[    0.631072] pil_riva pil_riva: using secure boot

<6>[    0.632812] pil_dsps pil_dsps: using secure boot

<6>[    0.633758] pil_gss pil_gss: using secure boot

<3>[    0.636291] smd_channel_probe_worker: allocation table not initialized

<6>[    0.647521] msm_dsps driver version 4.03.

<6>[    0.650177] NET: Registered protocol family 27

<1>[    0.655822] dma_test_init, minor number 97

<6>[    0.656494] lpass_fatal_init: lpass SSR driver init'ed.

<6>[    0.656951] wcnss_8960: module initialized

<6>[    0.657806] gss_8064_init: gss fatal driver init'ed.

<6>[    0.658721] acpuclk-8064 acpuclk-8064: SPEED BIN: 14

<6>[    0.658874] acpuclk-8064 acpuclk-8064: ACPU PVS: 3

<6>[    0.661560] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported

<6>[    0.661682] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported

<6>[    0.661865] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported

<6>[    0.662048] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported

<5>[    0.664672] msm_rpm_log_probe: OK

<6>[    0.667907] usbcore: registered new interface driver hsic_sysmon

<6>[    0.668518] audit: initializing netlink socket (disabled)

<5>[    0.668731] type=2000 audit(0.670:1): initialized

<4>[    0.670288] highmem bounce pool size: 64 pages

<5>[    0.680786] NFS: Registering the id_resolver key type

<6>[    0.682250] fuse init (API version 7.18)

<6>[    0.682800] msgmni has been set to 1115

<6>[    0.685943] NET: Registered protocol family 38

<6>[    0.686798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

<6>[    0.687011] io scheduler noop registered

<6>[    0.687377] io scheduler deadline registered (default)

<6>[    0.688018] io scheduler cfq registered

<6>[    0.692199] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000

<6>[    0.692626] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf00fc000

<6>[    0.693298] mipi_JDI_1080P_pt_init+

<6>[    0.693786] mipi_JDI_lcd_probe+

<6>[    0.694000] mipi_JDI_lcd_probe, hw_revision=0

<6>[    0.694366] mipi_JDI_lcd_probe, lcd_pwm_type=1

<6>[    0.695068] mipi_JDI_lcd_probe+

<6>[    0.695281] mipi_JDI_lcd_probe, hw_revision=0

<6>[    0.695648] mipi_JDI_lcd_probe, lcd_pwm_type=1

<6>[    0.695861] setting pdata->panel_info.fb_num to 3. type: 9

<6>[    0.710357] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!

<7>[    0.710937] Registered led device: lcd-backlight

<6>[    0.711059] mipi_JDI_lcd_probe-

<6>[    0.711181] mipi_JDI_1080P_pt_init-

<6>[    0.712341] setting pdata->panel_info.fb_num to 1. type: 7

<6>[    0.715332] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!

<6>[    0.715850] mdp4_dtv_vsync_init: ndx=0

<3>[    0.716125] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ede71408

<7>[    0.716339] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)

<6>[    0.716339] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled

<6>[    0.718109]

<6>[    0.718109]  msm_vidc_enc: Inside vid_enc_init()

<6>[    0.718780]

<6>[    0.718780]  msm_vidc_enc: Inside vid_enc_vcd_init()

<6>[    0.720550] msm_serial_hs module loaded

<6>[    0.720977] msm_serial_hsl: detected port #1

<6>[    0.721252] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM

<6>[    0.721771] msm_serial_hsl: detected port #0

<6>[    0.721984] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM

<6>[    0.722564] msm_serial_hsl: driver initialized

<6>[    0.724304] msm_rotator_probe: rotator_hw_revision=2

<6>[    0.727935] diagchar initialized now

<6>[    0.734619] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU

<6>[    0.753509] brd: module loaded

<6>[    0.760742] loop: module loaded

<6>[    0.763275] anx7808 init gpio

<6>[    0.838348] sp_tx_hardware_poweron: anx7808 power on

<6>[    0.839202] ANX7808 is found.

<5>[    0.840545] 3.3V output disabled

<6>[    0.898376] sp_tx_hardware_powerdown: anx7808 power down

<5>[    0.898468] SP_TX To System State:

<5>[    0.898590] STATE_CABLE_PLUG

<6>[    0.899230] tabla-slim tabla-slim: Platform data from board file

<3>[    1.059020] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6

<6>[    1.062164] tabla2x-slim tabla2x-slim: Platform data from board file

<6>[    1.125701] wcd9xxx_check_codec_type: codec is tabla_codec

<6>[    1.126098] wcd9xxx_check_codec_type: Read codec idbytes & version

<6>[    1.126098] byte_0[00000002] byte_1[00000000] byte_2[00000000]

<6>[    1.126129]  byte_3[00000001] version = 2

<4>[    1.128143] i2c-core: driver [tabla-i2c-core] using legacy suspend method

<4>[    1.128601] i2c-core: driver [tabla-i2c-core] using legacy resume method

<6>[    1.129852] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0

<6>[    1.130645] bcm2079x-i2c 0-0077: requesting IRQ 320

<6>[    1.131164] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully

<6>[    1.132293] SCSI Media Changer driver v0.25

<6>[    1.133422] spi_qsd spi_qsd.0: master is unqueued, this is deprecated

<6>[    1.135833] tun: Universal TUN/TAP device driver, 1.6

<6>[    1.136230] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<6>[    1.136810] rmnet_init: BAM devices[8]

<6>[    1.161285] PPP generic driver version 2.4.2

<6>[    1.161865] PPP BSD Compression module registered

<6>[    1.162078] PPP Deflate Compression module registered

<6>[    1.167114] PPP MPPE Compression module registered

<6>[    1.167358] NET: Registered protocol family 24

<6>[    1.167816] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[    1.168029] CSLIP: code copyright 1989 Regents of the University of California.

<6>[    1.168670] wcnss_wlan probed in built-in mode

<6>[    1.170471] usbcore: registered new interface driver asix

<6>[    1.171020] usbcore: registered new interface driver cdc_ether

<6>[    1.171356] usbcore: registered new interface driver net1080

<6>[    1.171844] usbcore: registered new interface driver cdc_subset

<6>[    1.172210] usbcore: registered new interface driver zaurus

<6>[    1.172882] usbcore: registered new interface driver cdc_ncm

<4>[    1.173187] smb345_probe+

<7>[    1.176788] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L

<7>[    1.176879] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H

<7>[    1.176940] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L

<4>[    1.176940] smb345_probe-

<4>[    1.177093] i2c-core: driver [smb345] using legacy suspend method

<4>[    1.177215] i2c-core: driver [smb345] using legacy resume method

<7>[    1.177459] bq27541_probe + client->addr= 55

<7>[    1.178466] bq27541_get_psp status: Not charging ret= 0x0201

<7>[    1.179382] bq27541_get_psp voltage_now= 4294000 uV

<7>[    1.180267] bq27541_get_capacity = 100% ret= 100

<7>[    1.181152] bq27541_get_psp temperature= 275 (0.1¢XC)

<7>[    1.182861] bq27541_get_psp current = 0 mA

<7>[    1.183898] bq27541_get_psp status: Not charging ret= 0x0201

<7>[    1.184783] bq27541_get_psp status: Not charging ret= 0x0201

<7>[    1.185668] bq27541_get_psp voltage_now= 4294000 uV

<7>[    1.186218] setup_low_battery_irq irq=317, LL_BAT_T30=1

<7>[    1.186218] bq27541_probe - bq27541-battery driver registered

<4>[    1.186279] i2c-core: driver [bq27541-battery] using legacy suspend method

<7>[    1.186584] bq27541_get_capacity = 100% ret= 100

<4>[    1.186737] i2c-core: driver [bq27541-battery] using legacy resume method

<6>[    1.187225] msm_otg msm_otg: msm_otg probe

<7>[    1.187500] bq27541_get_psp temperature= 275 (0.1¢XC)

<3>[    1.188049] msm_otg msm_otg: failed to get phy_clk

<6>[    1.188201] msm_otg msm_otg: OTG regs = f0308000

<7>[    1.189361] bq27541_get_psp current = 0 mA

<3>[    1.191558] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist

<7>[    1.191894] gpio_request: gpio-23 (msm_otg_ap_acok) status -16

<4>[    1.191925] gpio 23 request failed

<4>[    1.192047] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L

<7>[    1.192352] gpio_request: gpio-77 (msm_otg_id_pin) status -16

<4>[    1.192352] gpio 77 request failed

<4>[    1.192565] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H

<6>[    1.193115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.194396] usbcore: registered new interface driver cdc_acm

<6>[    1.194519] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    1.194702] Initializing USB Mass Storage driver...

<6>[    1.194915] usbcore: registered new interface driver usb-storage

<6>[    1.195098] USB Mass Storage support registered.

<6>[    1.195251] usbcore: registered new interface driver ums-alauda

<6>[    1.195526] usbcore: registered new interface driver ums-cypress

<6>[    1.195709] usbcore: registered new interface driver ums-datafab

<6>[    1.195953] usbcore: registered new interface driver ums-freecom

<6>[    1.196136] usbcore: registered new interface driver ums-isd200

<6>[    1.196380] usbcore: registered new interface driver ums-jumpshot

<6>[    1.196563] usbcore: registered new interface driver ums-karma

<6>[    1.196807] usbcore: registered new interface driver ums-onetouch

<6>[    1.196990] usbcore: registered new interface driver ums-sddr09

<6>[    1.197265] usbcore: registered new interface driver ums-sddr55

<6>[    1.197418] usbcore: registered new interface driver ums-usbat

<6>[    1.197753] usbcore: registered new interface driver usbserial

<6>[    1.197875] usbserial: USB Serial Driver core

<6>[    1.198120] usbcore: registered new interface driver qc_csvt

<6>[    1.198272] USB Serial support registered for qc_csvt

<6>[    1.198577] usbcore: registered new interface driver usb_ehset_test

<6>[    1.198791] usbcore: registered new interface driver diag_bridge

<6>[    1.199218] usbcore: registered new interface driver mdm_bridge

<6>[    1.200012] usbcore: registered new interface driver ks_bridge

<6>[    1.200225] ksb_init: init done

<6>[    1.200592] msm_otg msm_otg: phy_reset: success

<6>[    1.201507] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32

<6>[    1.201812] mbim_init: initialize 1 instances

<6>[    1.202117] mbim_init: Initialized 1 ports

<6>[    1.204681] rndis_qc_init: initialize rndis QC instance

<6>[    1.205230] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[    1.205444] android_usb gadget: Number of LUNs=1

<6>[    1.205535]  lun0: LUN: removable file: (no medium)

<6>[    1.206176] android_usb gadget: android_usb ready

<6>[    1.207244] mousedev: PS/2 mouse device common for all mice

<6>[    1.208190] usbcore: registered new interface driver xpad

<4>[    1.208282] [ektf3k]:[elan] elan_ktf3k_ts_init

<4>[    1.208648] [ektf3k]:[ELAN] Start HW reset!

<4>[    1.308502] [usb_otg] switch to peripheral mode by default (boot)


<4>[    1.468688] [ektf3k]:[elan]detect intr=>Old FW

<4>[    1.469055] [ektf3k]:The boot code is old!

<4>[    1.498962] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55

<4>[    1.499145] [ektf3k]:[elan] hello packet's rc = 0

<6>[    1.709014] notifying plugin

<4>[    1.710968] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044

<4>[    1.713104] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e

<4>[    1.715240] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2

<4>[    1.717285] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029

<4>[    1.719390] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047

<4>[    1.719512] [ektf3k]:[Elan] Max X=2239, Max Y=1343

<6>[    1.719909] input: elan-touchscreen as /devices/virtual/input/input0

<4>[    1.720367] [ektf3k]:The firmware was version 0xA044 and id:0x3029

<4>[    1.720611] [ektf3k]: /proc/ektf_dbg created

<4>[    1.721130] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode

<4>[    1.721527] [ektf3k]:[ELAN]misc_register finished!!

<6>[    1.721618] elan-ktf3k 3-0010: Update power source to 0

<6>[    1.722595] lis3dh_acc accelerometer driver: init

<4>[    1.722778] i2c-core: driver [lis3dh_acc] using legacy suspend method

<4>[    1.722961] i2c-core: driver [lis3dh_acc] using legacy resume method

<6>[    1.723297] ASUSTek: lid_driver_probe

<6>[    1.723663] input: lid_input as /devices/virtual/input/input1

<6>[    1.726409] using rtc device, pm8xxx_rtc, for alarms

<6>[    1.726837] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0

<6>[    1.727813] i2c /dev entries driver

<3>[    1.735168] ov5693_init_module:105

<3>[    1.735992] ov5693_init_module:110 rc -19

<3>[    1.770843] gpio 25 VCM_PD(1)

<3>[    1.770996] gpio 31 XSHUTDN(1)

<6>[    1.833862] mi1040_init_module:323

<3>[    1.834289] mi1040_init_module:329 rc -19

<6>[    1.838775] msm_otg msm_otg: chg_type = USB_SDP_CHARGER

<7>[    1.838958] smb345_charger: [usb_cable_type_detect] INOK=L

<7>[    1.838958] smb345_charger: [usb_cable_type_detect] Cable: SDP

<7>[    1.839416] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8

<4>[    1.839721] ========================================================

<4>[    1.839843] bq27541_battery_callback  usb_cable_state = 1

<4>[    1.840026] ========================================================

<6>[    1.840118] battery_callback cable_wake_lock 5 sec...

<6>[    1.840118]

<6>[    1.840393] elan-ktf3k 3-0010: Update power source to 1

<6>[    1.840789] The USB cable status = CHARGER_SDP

<6>[    1.844329] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received

<3>[    2.009094] gpio 43 CAM_RST(1)

<6>[    2.068695] mi1040_sensor_match_id +++

<6>[    2.069427] Sensor id: 0x2481

<6>[    2.069549] PMIC gpio 11 CAM_VENDOR_1(0)

<6>[    2.069763] PMIC gpio 10 CAM_VENDOR_0(0)

<6>[    2.069885] PMIC gpio 24 CAM_LENS(0)

<6>[    2.070007] Vendor is B

<6>[    2.070098] mi1040_sensor_match_id ---

<6>[    2.311035] lirc_dev: IR Remote Control driver registered, major 237

<6>[    2.311157] IR NEC protocol handler initialized

<6>[    2.311340] IR RC5(x) protocol handler initialized

<6>[    2.311431] IR RC6 protocol handler initialized

<6>[    2.311614] IR JVC protocol handler initialized

<6>[    2.311706] IR Sony protocol handler initialized

<6>[    2.311828] IR RC5 (streamzap) protocol handler initialized

<6>[    2.312011] IR SANYO protocol handler initialized

<6>[    2.312103] IR MCE Keyboard/mouse protocol handler initialized

<6>[    2.312286] IR LIRC bridge handler initialized

<6>[    2.312957] gspca_main: v2.14.0 registered

<6>[    2.313537] usbcore: registered new interface driver uvcvideo

<6>[    2.313659] USB Video Class driver (1.1.1)

<3>[    2.315460] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517

<6>[    2.316650] CAP1106: [cap1106_init]

<4>[    2.316802] i2c-core: driver [cap1106] using legacy suspend method

<4>[    2.317016] i2c-core: driver [cap1106] using legacy resume method

<6>[    2.340270] pm8xxx_tm_probe: OK

<6>[    2.341461] pm8xxx_tm_probe: OK

<6>[    2.343109] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

<6>[    2.344787] cpuidle: using governor ladder

<6>[    2.345031] cpuidle: using governor menu

<6>[    2.345886] mmc0: SDCC Version: 0x06000018

<6>[    2.347900] mmc0: bam physical base=0x12402000

<6>[    2.348022] mmc0: bam virtual base=0xf0334000

<6>[    2.348236] sps:BAM 0x12402000 is registered.

<6>[    2.348327] mmc0: BAM device registered. bam_handle=0xed96a600

<6>[    2.350341] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6

<6>[    2.352081] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130

<6>[    2.352386] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800

<3>[    2.352539] mmc0: No card detect facilities available

<6>[    2.354492] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1

<6>[    2.354614] mmc0: Controller capabilities: 0x0000039a

<6>[    2.354797] mmc0: 8 bit data mode enabled

<6>[    2.354888] mmc0: 4 bit data mode disabled

<6>[    2.355010] mmc0: polling status mode disabled

<6>[    2.355194] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz

<6>[    2.355316] mmc0: Slot eject status = 0

<6>[    2.355499] mmc0: Power save feature enable = 1

<6>[    2.355590] mmc0: SPS-BAM data transfer mode available

<6>[    2.360198] usbcore: registered new interface driver usbhid

<6>[    2.360290] usbhid: USB HID core driver

<6>[    2.361755] ashmem: initialized

<6>[    2.362396] logger: created 256K log 'log_main'

<6>[    2.362884] logger: created 256K log 'log_events'

<6>[    2.363372] logger: created 256K log 'log_radio'

<6>[    2.364013] logger: created 256K log 'log_system'

<6>[    2.365447] usbcore: registered new interface driver snd-usb-audio

<3>[    2.368103] tabla_probe

<6>[    2.371002] msm_pcm_probe: dev name msm-voip-dsp

<6>[    2.371734] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8

<6>[    2.372131] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8

<6>[    2.374359] msm_pcm_probe: dev name msm-pcm-dsp

<6>[    2.375244] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp

<6>[    2.375976] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp

<6>[    2.376373] adding pm_qos request in low latency driver

<6>[    2.376586] done adding pm_qos request in low latency driver

<6>[    2.378540] msm_compr_probe: dev name msm-compr-dsp

<6>[    2.379852] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa

<3>[    2.381927] msm8930_audio_init: Not the right machine type

<3>[    2.382141] msm_audio_init: Not the right machine type

<6>[    2.382507] msm_audio_init: Not APQ8064 in I2S mode

<3>[    2.482971] mmc0: unrecognised EXT_CSD revision 7

<3>[    2.483093] mmc0: error -22 whilst initialising MMC card

<6>[    2.543579] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok

<6>[    2.544738] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok

<6>[    2.546051] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok

<6>[    2.547271] asoc: snd-soc-dummy-dai <-> VoIP mapping ok

<6>[    2.548553] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok

<6>[    2.549621] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok

<6>[    2.550872] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok

<6>[    2.552032] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok

<6>[    2.553009] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok

<6>[    2.554351] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok

<6>[    2.555480] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok

<6>[    2.556640] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok

<6>[    2.557830] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok

<6>[    2.559173] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok

<6>[    2.560241] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok

<6>[    2.562561] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok

<6>[    2.568786] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok

<6>[    2.569824] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok

<6>[    2.570739] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok

<6>[    2.571807] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok

<6>[    2.572631] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok

<6>[    2.573669] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok

<6>[    2.574584] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok

<6>[    2.575531] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok

<6>[    2.576568] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok

<6>[    2.577606] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok

<6>[    2.578613] asoc: tabla_rx2 <-> msm-dai-stub mapping ok

<6>[    2.579620] asoc: tabla_tx1 <-> msm-dai-stub mapping ok

<6>[    2.580566] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok

<6>[    2.581634] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok

<6>[    2.582641] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok

<6>[    2.583801] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok

<6>[    2.584777] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok

<6>[    2.585876] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok

<6>[    2.586730] asoc: tabla_tx3 <-> msm-dai-stub mapping ok

<6>[    2.587615] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok

<6>[    2.588836] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok

<6>[    2.593109] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2

<6>[    2.594055] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3

<6>[    2.604217] headset_init+ #####

<6>[    2.605468] input: h2w button as /devices/virtual/input/input4

<6>[    2.606323] HEADSET: Headset detection mode

<6>[    2.658996] set_hs_micbias badgap status: OFF power down bandgap

<6>[    2.659484] headset_init- #####

<6>[    2.659851] u32 classifier

<6>[    2.660064]     Actions configured

<6>[    2.660430] Netfilter messages via NETLINK v0.30.

<6>[    2.660675] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

<6>[    2.662475] ctnetlink v0.93: registering with nfnetlink.

<6>[    2.663818] TCP: cubic registered

<6>[    2.665161] NET: Registered protocol family 10

<6>[    2.672363] Mobile IPv6

<6>[    2.672637] IPv6 over IPv4 tunneling driver

<6>[    2.674133] NET: Registered protocol family 17

<6>[    2.674560] NET: Registered protocol family 15

<6>[    2.674987] L2TP core driver, V2.0

<6>[    2.675231] PPPoL2TP kernel driver, V2.0

<5>[    2.675598] Registering the dns_resolver key type

<6>[    2.676086] Bluetooth: RFCOMM socket layer initialized

<6>[    2.676483] Bluetooth: RFCOMM ver 1.11

<6>[    2.676727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    2.676940] Bluetooth: BNEP filters: protocol multicast

<6>[    2.677337] Bluetooth: BNEP socket layer initialized

<6>[    2.677551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    2.677947] Bluetooth: HIDP socket layer initialized

<6>[    2.679779] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0

<5>[    2.680419] Registering SWP/SWPB emulation handler

<6>[    2.680633] clock_late_init: Removing enables held for handed-off clocks

<6>[    2.688323] MSM Watchdog Initialized

<6>[    2.701782] AppArmor: AppArmor sha1 policy hashing enabled

<7>[    2.702423] gpio_set_debounce: gpio-26 status -22

<7>[    2.702545] gpio_set_debounce: gpio-155 status -22

<7>[    2.702606] gpio_set_debounce: gpio-189 status -22

<6>[    2.702819] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5

<6>[    2.703186] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-07-11 21:13:38 UTC (1562879618)

<3>[    2.703582] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22

<3>[    2.703735] Unable to register core for 0

<4>[    2.703796] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22

<6>[    2.704071] ALSA device list:

<6>[    2.704132]   #0: apq8064-tabla-snd-card

<6>[    2.704864] Freeing init memory: 1036K

<6>[    2.704925] Write protecting the kernel text section c0008000 - c0dfe000

<7>[    3.849731] bq27541_get_psp status: Full ret= 0x0201

<7>[    3.850280] bq27541_get_psp status: Full ret= 0x0201

<7>[    3.850830] bq27541_get_psp voltage_now= 4291000 uV

<7>[    3.851379] bq27541_get_capacity = 100% ret= 100

<7>[    3.851959] bq27541_get_psp temperature= 276 (0.1¢XC)

<7>[    3.853057] bq27541_get_psp current = -92 mA

<7>[    3.940246] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73

<7>[    3.940612] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4294000

<7>[    3.940979] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[    3.941284] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<3>[    4.278320] init: could not import file '/init.recovery.flo.rc' from '/init.rc'

<3>[    4.279968] healthd: wakealarm_init: timerfd_create failed

<7>[    4.284759] bq27541_get_psp status: Full ret= 0x0201

<7>[    4.285308] bq27541_get_psp voltage_now= 4291000 uV

<7>[    4.285858] bq27541_get_capacity = 100% ret= 100

<7>[    4.286407] bq27541_get_psp temperature= 276 (0.1¢XC)

<7>[    4.287536] bq27541_get_psp current = -92 mA

<3>[    4.526672] init: cannot open '/initlogo.rle'

<3>[    4.527740] enable_store: android_usb: already disabled

<3>[    4.528564] init: Unable to open persistent property directory /data/property errno: 2

<3>[    4.530792] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'

<3>[    4.530944] init: powerctl: cannot expand '${sys.powerctl}'

<3>[    4.531066] healthd: wakealarm_init: timerfd_create failed

<6>[    4.533721] adb_open

<6>[    4.533813] adb_bind_config

<4>[    4.546508] mipi_dsi_panel_power+, on=1

<4>[    4.629241] mipi_dsi_panel_power-

<6>[    4.634826] mipi_JDI_lcd_on+

<6>[    4.634826] mipi_JDI_lcd_on-, booting

<3>[    4.636535] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    4.636566] android_work: android_work: did not send uevent (0 0   (null))

<6>[    4.657867] mipi_JDI_set_recovery_backlight: 100/255

<6>[    4.699584] mipi_JDI_lcd_off+

<6>[    4.699615] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing

<4>[    4.699615] mipi_dsi_panel_power+, on=0

<6>[    4.699615] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing

<4>[    4.703308] mipi_dsi_panel_power+, on=1

<6>[    4.703308] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing

<6>[    4.709442] mipi_JDI_lcd_on+

<6>[    4.709442] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing

<6>[    4.723022] android_work: android_work: sent uevent USB_STATE=CONNECTED

<6>[    4.748962] android_usb gadget: high-speed config #1: android_usb

<3>[    4.749114] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    4.749176] msm_otg msm_otg: Avail curr from USB = 500

<6>[    4.809326] android_work: android_work: sent uevent USB_STATE=CONFIGURED

<6>[    6.849731] msm_ta_detect_work: USB exit ta detection - frindex

<6>[   54.609344] gpio_keys: Pressed KEY_VOLUMEDOWN

<6>[   54.819366] gpio_keys: Released KEY_VOLUMEDOWN

<6>[   55.049346] gpio_keys: Pressed KEY_VOLUMEDOWN

<6>[   55.199432] gpio_keys: Released KEY_VOLUMEDOWN

<4>[   61.960968] adbd (190): /proc/190/oom_adj is deprecated, please use /proc/190/oom_score_adj instead.

<7>[   64.170196] bq27541_get_psp status: Full ret= 0x0201

<7>[   64.170745] bq27541_get_psp status: Full ret= 0x0201

<7>[   64.171325] bq27541_get_psp voltage_now= 4295000 uV

<7>[   64.171875] bq27541_get_capacity = 100% ret= 100

<7>[   64.172424] bq27541_get_psp temperature= 277 (0.1¢XC)

<7>[   64.173553] bq27541_get_psp current = 0 mA

<7>[   64.174255] bq27541_get_capacity = 100% ret= 100

<7>[   64.174896] bq27541_get_psp voltage_now= 4295000 uV

<7>[   64.176116] bq27541_get_psp current = 0 mA

<7>[   64.176757] bq27541_get_psp temperature= 277 (0.1¢XC)

<7>[   64.177398] bq27541_get_psp status: Full ret= 0x0201

<7>[   64.260192] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[   64.260467] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4291000

<7>[   64.260864] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[   64.261138] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  124.326019] bq27541_get_psp status: Full ret= 0x0200

<7>[  124.326599] bq27541_get_psp status: Full ret= 0x0200

<7>[  124.327148] bq27541_get_psp voltage_now= 4295000 uV

<7>[  124.327697] bq27541_get_capacity = 100% ret= 100

<7>[  124.328247] bq27541_get_psp temperature= 278 (0.1¢XC)

<7>[  124.329345] bq27541_get_psp current = 0 mA

<7>[  124.330047] bq27541_get_capacity = 100% ret= 100

<7>[  124.330688] bq27541_get_psp voltage_now= 4295000 uV

<7>[  124.331878] bq27541_get_psp current = 0 mA

<7>[  124.332519] bq27541_get_psp temperature= 278 (0.1¢XC)

<7>[  124.333160] bq27541_get_psp status: Full ret= 0x0200

<7>[  124.420532] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  124.420776] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4295000

<7>[  124.421173] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  124.421447] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  184.497802] bq27541_get_psp status: Full ret= 0x0200

<7>[  184.498352] bq27541_get_psp status: Full ret= 0x0200

<7>[  184.498901] bq27541_get_psp voltage_now= 4296000 uV

<7>[  184.499450] bq27541_get_capacity = 100% ret= 100

<7>[  184.500000] bq27541_get_psp temperature= 279 (0.1¢XC)

<7>[  184.501098] bq27541_get_psp current = 0 mA

<7>[  184.501800] bq27541_get_capacity = 100% ret= 100

<7>[  184.502441] bq27541_get_psp voltage_now= 4296000 uV

<7>[  184.503631] bq27541_get_psp current = 0 mA

<7>[  184.504272] bq27541_get_psp temperature= 279 (0.1¢XC)

<7>[  184.504913] bq27541_get_psp status: Full ret= 0x0200

<7>[  184.580261] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  184.580535] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4295000

<7>[  184.580902] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  184.581207] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  244.645416] bq27541_get_psp status: Full ret= 0x0200

<7>[  244.645965] bq27541_get_psp status: Full ret= 0x0200

<7>[  244.646514] bq27541_get_psp voltage_now= 4296000 uV

<7>[  244.647064] bq27541_get_capacity = 100% ret= 100

<7>[  244.647613] bq27541_get_psp temperature= 281 (0.1¢XC)

<7>[  244.648712] bq27541_get_psp current = 0 mA

<7>[  244.649414] bq27541_get_capacity = 100% ret= 100

<7>[  244.650054] bq27541_get_psp voltage_now= 4296000 uV

<7>[  244.651245] bq27541_get_psp current = 0 mA

<7>[  244.651885] bq27541_get_psp temperature= 281 (0.1¢XC)

<7>[  244.652526] bq27541_get_psp status: Full ret= 0x0200

<7>[  244.740356] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  244.740600] smb345_charger: [smb345_config_thermal_charging] temp=27, volt=4296000

<7>[  244.740997] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  244.741271] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  304.804962] bq27541_get_psp status: Full ret= 0x0200

<7>[  304.805511] bq27541_get_psp status: Full ret= 0x0200

<7>[  304.806060] bq27541_get_psp voltage_now= 4295000 uV

<7>[  304.806610] bq27541_get_capacity = 100% ret= 100

<7>[  304.807189] bq27541_get_psp temperature= 282 (0.1¢XC)

<7>[  304.808288] bq27541_get_psp current = 0 mA

<7>[  304.808990] bq27541_get_capacity = 100% ret= 100

<7>[  304.809631] bq27541_get_psp voltage_now= 4295000 uV

<7>[  304.810821] bq27541_get_psp current = 0 mA

<7>[  304.811492] bq27541_get_psp temperature= 282 (0.1¢XC)

<7>[  304.812133] bq27541_get_psp status: Full ret= 0x0200

<7>[  304.900482] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  304.900726] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4296000

<7>[  304.901123] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  304.901397] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  364.966918] bq27541_get_psp status: Full ret= 0x0200

<7>[  364.967468] bq27541_get_psp status: Full ret= 0x0200

<7>[  364.968048] bq27541_get_psp voltage_now= 4295000 uV

<7>[  364.968597] bq27541_get_capacity = 100% ret= 100

<7>[  364.969146] bq27541_get_psp temperature= 283 (0.1¢XC)

<7>[  364.970275] bq27541_get_psp current = 0 mA

<7>[  364.970947] bq27541_get_capacity = 100% ret= 100

<7>[  364.971588] bq27541_get_psp voltage_now= 4295000 uV

<7>[  364.972808] bq27541_get_psp current = 0 mA

<7>[  364.973449] bq27541_get_psp temperature= 283 (0.1¢XC)

<7>[  364.974090] bq27541_get_psp status: Full ret= 0x0200

<7>[  365.060424] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  365.060699] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4295000

<7>[  365.061096] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  365.061370] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<7>[  425.126647] bq27541_get_psp status: Full ret= 0x0200

<7>[  425.127227] bq27541_get_psp status: Full ret= 0x0200

<7>[  425.127777] bq27541_get_psp voltage_now= 4295000 uV

<7>[  425.128326] bq27541_get_capacity = 100% ret= 100

<7>[  425.128875] bq27541_get_psp temperature= 285 (0.1¢XC)

<7>[  425.130004] bq27541_get_psp current = 0 mA

<7>[  425.130676] bq27541_get_capacity = 100% ret= 100

<7>[  425.131347] bq27541_get_psp voltage_now= 4295000 uV

<7>[  425.132537] bq27541_get_psp current = 0 mA

<7>[  425.133178] bq27541_get_psp temperature= 285 (0.1¢XC)

<7>[  425.133819] bq27541_get_psp status: Full ret= 0x0200

<7>[  425.220611] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<7>[  425.220855] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4295000

<7>[  425.221252] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt=e8

<7>[  425.221527] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable