API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 6th, 2022
321
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.41 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# iw list
  2. Wiphy phy1
  3. wiphy index: 1
  4. max # scan SSIDs: 4
  5. max scan IEs length: 2304 bytes
  6. max # sched scan SSIDs: 0
  7. max # match sets: 0
  8. Retry short limit: 7
  9. Retry long limit: 4
  10. Coverage class: 0 (up to 0m)
  11. Device supports AP-side u-APSD.
  12. Device supports T-DLS.
  13. Available Antennas: TX 0x3 RX 0x3
  14. Configured Antennas: TX 0x3 RX 0x3
  15. Supported interface modes:
  16. * IBSS
  17. * managed
  18. * AP
  19. * AP/VLAN
  20. * monitor
  21. * mesh point
  22. * P2P-client
  23. * P2P-GO
  24. Band 2:
  25. Capabilities: 0x1ff
  26. RX LDPC
  27. HT20/HT40
  28. SM Power Save disabled
  29. RX Greenfield
  30. RX HT20 SGI
  31. RX HT40 SGI
  32. TX STBC
  33. RX STBC 1-stream
  34. Max AMSDU length: 3839 bytes
  35. No DSSS/CCK HT40
  36. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  37. Minimum RX AMPDU time spacing: No restriction (0x00)
  38. HT TX/RX MCS rate indexes supported: 0-15
  39. VHT Capabilities (0x338001f8):
  40. Max MPDU length: 3895
  41. Supported Channel Width: 160 MHz, 80+80 MHz
  42. RX LDPC
  43. short GI (80 MHz)
  44. short GI (160/80+80 MHz)
  45. TX STBC
  46. RX antenna pattern consistency
  47. TX antenna pattern consistency
  48. VHT RX MCS set:
  49. 1 streams: MCS 0-9
  50. 2 streams: MCS 0-9
  51. 3 streams: not supported
  52. 4 streams: not supported
  53. 5 streams: not supported
  54. 6 streams: not supported
  55. 7 streams: not supported
  56. 8 streams: not supported
  57. VHT RX highest supported: 0 Mbps
  58. VHT TX MCS set:
  59. 1 streams: MCS 0-9
  60. 2 streams: MCS 0-9
  61. 3 streams: not supported
  62. 4 streams: not supported
  63. 5 streams: not supported
  64. 6 streams: not supported
  65. 7 streams: not supported
  66. 8 streams: not supported
  67. VHT TX highest supported: 0 Mbps
  68. Frequencies:
  69. * 5180 MHz [36] (23.0 dBm)
  70. * 5200 MHz [40] (23.0 dBm)
  71. * 5220 MHz [44] (23.0 dBm)
  72. * 5240 MHz [48] (23.0 dBm)
  73. * 5260 MHz [52] (20.0 dBm) (radar detection)
  74. * 5280 MHz [56] (20.0 dBm) (radar detection)
  75. * 5300 MHz [60] (20.0 dBm) (radar detection)
  76. * 5320 MHz [64] (20.0 dBm) (radar detection)
  77. * 5500 MHz [100] (23.0 dBm) (radar detection)
  78. * 5520 MHz [104] (23.0 dBm) (radar detection)
  79. * 5540 MHz [108] (23.0 dBm) (radar detection)
  80. * 5560 MHz [112] (23.0 dBm) (radar detection)
  81. * 5580 MHz [116] (23.0 dBm) (radar detection)
  82. * 5600 MHz [120] (23.0 dBm) (radar detection)
  83. * 5620 MHz [124] (23.0 dBm) (radar detection)
  84. * 5640 MHz [128] (23.0 dBm) (radar detection)
  85. * 5660 MHz [132] (23.0 dBm) (radar detection)
  86. * 5680 MHz [136] (23.0 dBm) (radar detection)
  87. * 5700 MHz [140] (23.0 dBm) (radar detection)
  88. * 5720 MHz [144] (13.0 dBm) (radar detection)
  89. * 5745 MHz [149] (13.0 dBm)
  90. * 5765 MHz [153] (13.0 dBm)
  91. * 5785 MHz [157] (13.0 dBm)
  92. * 5805 MHz [161] (13.0 dBm)
  93. * 5825 MHz [165] (13.0 dBm)
  94. * 5845 MHz [169] (13.0 dBm)
  95. * 5865 MHz [173] (13.0 dBm)
  96. valid interface combinations:
  97. * #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 16,
  98. total <= 16, #channels <= 1, STA/AP BI must match
  99. HT Capability overrides:
  100. * MCS: ff ff ff ff ff ff ff ff ff ff
  101. * maximum A-MSDU length
  102. * supported channel width
  103. * short GI for 40 MHz
  104. * max A-MPDU length exponent
  105. * min MPDU start spacing
  106. max # scan plans: 1
  107. max scan plan interval: 0
  108. max scan plan iterations: 0
  109. Supported extended features:
  110. * [ VHT_IBSS ]: VHT-IBSS
  111. * [ RRM ]: RRM
  112. * [ SET_SCAN_DWELL ]: scan dwell setting
  113. * [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
  114. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  115. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  116. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  117. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  118. * [ AQL ]: Airtime Queue Limits (AQL)
  119. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  120. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  121. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  122. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
  123. Wiphy phy0
  124. wiphy index: 0
  125. max # scan SSIDs: 4
  126. max scan IEs length: 2257 bytes
  127. max # sched scan SSIDs: 0
  128. max # match sets: 0
  129. Retry short limit: 7
  130. Retry long limit: 4
  131. Coverage class: 0 (up to 0m)
  132. Device supports AP-side u-APSD.
  133. Device supports T-DLS.
  134. Available Antennas: TX 0x3 RX 0x3
  135. Configured Antennas: TX 0x3 RX 0x3
  136. Supported interface modes:
  137. * IBSS
  138. * managed
  139. * AP
  140. * AP/VLAN
  141. * monitor
  142. * mesh point
  143. * P2P-client
  144. * P2P-GO
  145. Band 1:
  146. Capabilities: 0x1fe
  147. HT20/HT40
  148. SM Power Save disabled
  149. RX Greenfield
  150. RX HT20 SGI
  151. RX HT40 SGI
  152. TX STBC
  153. RX STBC 1-stream
  154. Max AMSDU length: 3839 bytes
  155. No DSSS/CCK HT40
  156. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  157. Minimum RX AMPDU time spacing: No restriction (0x00)
  158. HT TX/RX MCS rate indexes supported: 0-15
  159. Frequencies:
  160. * 2412 MHz [1] (20.0 dBm)
  161. * 2417 MHz [2] (20.0 dBm)
  162. * 2422 MHz [3] (20.0 dBm)
  163. * 2427 MHz [4] (20.0 dBm)
  164. * 2432 MHz [5] (20.0 dBm)
  165. * 2437 MHz [6] (20.0 dBm)
  166. * 2442 MHz [7] (20.0 dBm)
  167. * 2447 MHz [8] (20.0 dBm)
  168. * 2452 MHz [9] (20.0 dBm)
  169. * 2457 MHz [10] (20.0 dBm)
  170. * 2462 MHz [11] (20.0 dBm)
  171. * 2467 MHz [12] (20.0 dBm)
  172. * 2472 MHz [13] (20.0 dBm)
  173. * 2484 MHz [14] (disabled)
  174. valid interface combinations:
  175. * #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 4,
  176. total <= 4, #channels <= 1, STA/AP BI must match
  177. HT Capability overrides:
  178. * MCS: ff ff ff ff ff ff ff ff ff ff
  179. * maximum A-MSDU length
  180. * supported channel width
  181. * short GI for 40 MHz
  182. * max A-MPDU length exponent
  183. * min MPDU start spacing
  184. max # scan plans: 1
  185. max scan plan interval: -1
  186. max scan plan iterations: 0
  187. Supported extended features:
  188. * [ RRM ]: RRM
  189. * [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
  190. * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  191. * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
  192. * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
  193. * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
  194. * [ AQL ]: Airtime Queue Limits (AQL)
  195. * [ SCAN_RANDOM_SN ]: use random sequence numbers in scans
  196. * [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans
  197. * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
  198. * [ DEL_IBSS_STA ]: deletion of IBSS station support
  199. * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
  200. * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!