Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.7.6-arm-64 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.06.0 SMP PREEMPT Tue Jun 30 13:05:03 MSK 2020
- [ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000043000000, size 768 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x0000000077ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x77c30100-0x77c31fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000001000000-0x000000003fffffff]
- [ 0.000000] DMA32 [mem 0x0000000040000000-0x0000000077ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
- [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
- [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x0000000077ffffff]
- [ 0.000000] On node 0 totalpages: 477952
- [ 0.000000] DMA zone: 4032 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 248576 pages, LIFO batch:63
- [ 0.000000] DMA32 zone: 3584 pages used for memmap
- [ 0.000000] DMA32 zone: 229376 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv0.2 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] percpu: Embedded 22 pages/cpu s51224 r8192 d30696 u90112
- [ 0.000000] pcpu-alloc: s51224 r8192 d30696 u90112 alloc=22*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 mac=48:A0:F8:F4:B3:00
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 979716K/1911808K available (16060K kernel code, 1282K rwdata, 6380K rodata, 3392K init, 924K bss, 145660K reserved, 786432K cma-reserved)
- [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x158 with crng_init=0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000355] Console: colour dummy device 80x25
- [ 0.000799] printk: console [tty0] enabled
- [ 0.000887] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000909] pid_max: default: 32768 minimum: 301
- [ 0.001021] LSM: Security Framework initializing
- [ 0.001112] AppArmor: AppArmor initialized
- [ 0.001172] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.001196] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.002528] rcu: Hierarchical SRCU implementation.
- [ 0.003419] EFI services will not be available.
- [ 0.003677] smp: Bringing up secondary CPUs ...
- [ 0.004248] Detected VIPT I-cache on CPU1
- [ 0.004299] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.004853] Detected VIPT I-cache on CPU2
- [ 0.004900] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.005418] Detected VIPT I-cache on CPU3
- [ 0.005460] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.005530] smp: Brought up 1 node, 4 CPUs
- [ 0.005597] SMP: Total of 4 processors activated.
- [ 0.005609] CPU features: detected: 32-bit EL0 Support
- [ 0.005621] CPU features: detected: CRC32 instructions
- [ 0.015335] CPU: All CPU(s) started at EL2
- [ 0.015391] alternatives: patching kernel code
- [ 0.016553] devtmpfs: initialized
- [ 0.021639] Registered cp15_barrier emulation handler
- [ 0.021669] Registered setend emulation handler
- [ 0.021685] KASLR disabled due to lack of seed
- [ 0.022014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.022045] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.042089] xor: measuring software checksum speed
- [ 0.080205] 8regs : 2372.000 MB/sec
- [ 0.120239] 32regs : 2723.000 MB/sec
- [ 0.160279] arm64_neon: 2384.000 MB/sec
- [ 0.160290] xor: using function: 32regs (2723.000 MB/sec)
- [ 0.160343] pinctrl core: initialized pinctrl subsystem
- [ 0.160984] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.161241] DMI not present or invalid.
- [ 0.161745] NET: Registered protocol family 16
- [ 0.163196] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.163235] audit: initializing netlink subsys (disabled)
- [ 0.163429] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
- [ 0.164693] cpuidle: using governor ladder
- [ 0.164731] cpuidle: using governor menu
- [ 0.165120] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.165205] ASID allocator initialised with 65536 entries
- [ 0.165938] Serial: AMBA PL011 UART driver
- [ 0.181485] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.181511] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.181525] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.181539] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.183285] cryptd: max_cpu_qlen set to 1000
- [ 0.252463] raid6: neonx8 gen() 2148 MB/s
- [ 0.320515] raid6: neonx8 xor() 1604 MB/s
- [ 0.388582] raid6: neonx4 gen() 2206 MB/s
- [ 0.456641] raid6: neonx4 xor() 1588 MB/s
- [ 0.524700] raid6: neonx2 gen() 2102 MB/s
- [ 0.592762] raid6: neonx2 xor() 1457 MB/s
- [ 0.660817] raid6: neonx1 gen() 1832 MB/s
- [ 0.728879] raid6: neonx1 xor() 1248 MB/s
- [ 0.796946] raid6: int64x8 gen() 1491 MB/s
- [ 0.865022] raid6: int64x8 xor() 784 MB/s
- [ 0.933064] raid6: int64x4 gen() 1666 MB/s
- [ 1.001107] raid6: int64x4 xor() 846 MB/s
- [ 1.069171] raid6: int64x2 gen() 1419 MB/s
- [ 1.137224] raid6: int64x2 xor() 750 MB/s
- [ 1.205288] raid6: int64x1 gen() 1053 MB/s
- [ 1.273326] raid6: int64x1 xor() 548 MB/s
- [ 1.273337] raid6: using algorithm neonx4 gen() 2206 MB/s
- [ 1.273348] raid6: .... xor() 1588 MB/s, rmw enabled
- [ 1.273358] raid6: using neon recovery algorithm
- [ 1.273820] ACPI: Interpreter disabled.
- [ 1.274877] iommu: Default domain type: Translated
- [ 1.275136] vgaarb: loaded
- [ 1.275699] SCSI subsystem initialized
- [ 1.275874] libata version 3.00 loaded.
- [ 1.276066] usbcore: registered new interface driver usbfs
- [ 1.276109] usbcore: registered new interface driver hub
- [ 1.276172] usbcore: registered new device driver usb
- [ 1.276558] pps_core: LinuxPPS API ver. 1 registered
- [ 1.276571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.276595] PTP clock support registered
- [ 1.276620] EDAC MC: Ver: 3.0.0
- [ 1.277539] FPGA manager framework
- [ 1.277643] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.278208] NetLabel: Initializing
- [ 1.278225] NetLabel: domain hash size = 128
- [ 1.278235] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.278295] NetLabel: unlabeled traffic allowed by default
- [ 1.278803] clocksource: Switched to clocksource arch_sys_counter
- [ 1.279055] VFS: Disk quotas dquot_6.6.0
- [ 1.279118] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.279241] FS-Cache: Loaded
- [ 1.279700] AppArmor: AppArmor Filesystem Enabled
- [ 1.279939] pnp: PnP ACPI: disabled
- [ 1.284975] NET: Registered protocol family 2
- [ 1.285485] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
- [ 1.285536] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 1.285654] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 1.285860] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.286004] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.286059] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.286278] NET: Registered protocol family 1
- [ 1.286709] RPC: Registered named UNIX socket transport module.
- [ 1.286730] RPC: Registered udp transport module.
- [ 1.286740] RPC: Registered tcp transport module.
- [ 1.286750] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.286766] NET: Registered protocol family 44
- [ 1.286787] PCI: CLS 0 bytes, default 64
- [ 1.287001] Trying to unpack rootfs image as initramfs...
- [ 1.770992] Freeing initrd memory: 11520K
- [ 1.771797] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 1.775344] Initialise system trusted keyrings
- [ 1.775551] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 1.780720] zbud: loaded
- [ 1.782117] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.782405] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.783073] NFS: Registering the id_resolver key type
- [ 1.783115] Key type id_resolver registered
- [ 1.783125] Key type id_legacy registered
- [ 1.783142] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.783155] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.784348] FS-Cache: Netfs 'cifs' registered for caching
- [ 1.784667] Key type cifs.spnego registered
- [ 1.784687] Key type cifs.idmap registered
- [ 1.784709] ntfs: driver 2.1.32 [Flags: R/W].
- [ 1.785290] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 1.789546] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
- [ 1.791252] ocfs2: Registered cluster interface o2cb
- [ 1.791509] OCFS2 User DLM kernel interface loaded
- [ 1.793221] gfs2: GFS2 installed
- [ 1.794205] aufs 5.7-20200622
- [ 1.807056] NET: Registered protocol family 38
- [ 1.807085] Key type asymmetric registered
- [ 1.807096] Asymmetric key parser 'x509' registered
- [ 1.807107] Asymmetric key parser 'pkcs8' registered
- [ 1.807157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 1.807302] io scheduler mq-deadline registered
- [ 1.807316] io scheduler kyber registered
- [ 1.807504] io scheduler bfq registered
- [ 1.820550] soc soc0: Amlogic Meson GXL (S905X) Revision 21:a (82:2) Detected
- [ 1.824370] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
- [ 1.826061] Serial: AMBA driver
- [ 1.826412] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 12, base_baud = 1500000) is a meson_uart
- [ 1.826575] serial serial0: tty port ttyAML6 registered
- [ 1.826835] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart
- [ 2.870862] printk: console [ttyAML0] enabled
- [ 2.887269] brd: module loaded
- [ 2.894751] loop: module loaded
- [ 2.899241] libphy: Fixed MDIO Bus: probed
- [ 2.899957] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
- [ 2.904291] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
- [ 2.910495] meson8b-dwmac c9410000.ethernet: PTP uses main clock
- [ 2.916358] meson8b-dwmac c9410000.ethernet: no reset control found
- [ 2.922581] meson8b-dwmac c9410000.ethernet: PRG_ETH0 value at init = 0x00001800
- [ 2.929895] meson8b-dwmac c9410000.ethernet: PRG_ETH1 value at init = 0x00000000
- [ 2.937674] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
- [ 2.944315] meson8b-dwmac c9410000.ethernet: DWMAC1000
- [ 2.949474] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
- [ 2.956890] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
- [ 2.964308] meson8b-dwmac c9410000.ethernet: COE Type 2
- [ 2.969482] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
- [ 2.976468] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
- [ 2.982879] meson8b-dwmac c9410000.ethernet: Normal descriptors
- [ 2.988717] meson8b-dwmac c9410000.ethernet: Ring mode enabled
- [ 2.994495] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 3.002853] libphy: stmmac: probed
- [ 3.007048] VFIO - User Level meta-driver version: 0.3
- [ 3.013265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.017382] ehci-pci: EHCI PCI platform driver
- [ 3.021811] ehci-platform: EHCI generic platform driver
- [ 3.027111] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.033082] ohci-pci: OHCI PCI platform driver
- [ 3.037493] ohci-platform: OHCI generic platform driver
- [ 3.043280] usbcore: registered new interface driver usb-storage
- [ 3.048771] mousedev: PS/2 mouse device common for all mice
- [ 3.054993] i2c /dev entries driver
- [ 3.060817] sdhci: Secure Digital Host Controller Interface driver
- [ 3.063681] sdhci: Copyright(c) Pierre Ossman
- [ 3.068138] Synopsys Designware Multimedia Card Interface Driver
- [ 3.075354] meson-gx-mmc d0072000.mmc: Got CD GPIO
- [ 3.104108] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
- [ 3.129428] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.130305] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.136228] meson-sm: secure-monitor enabled
- [ 3.140896] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
- [ 3.147651] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
- [ 3.155433] mmc0: new high speed SDHC card at address 59b4
- [ 3.155804] hid: raw HID events driver (C) Jiri Kosina
- [ 3.161565] mmcblk0: mmc0:59b4 SDU1 30.1 GiB
- [ 3.165992] usbcore: registered new interface driver usbhid
- [ 3.172342] mmcblk0: p1 p2
- [ 3.175618] usbhid: USB HID core driver
- [ 3.176610] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
- [ 3.193124] no UART detected at 0x1
- [ 3.196590] NET: Registered protocol family 17
- [ 3.197048] Key type dns_resolver registered
- [ 3.201776] registered taskstats version 1
- [ 3.205203] Loading compiled-in X.509 certificates
- [ 3.210094] zswap: loaded using pool lzo/zbud
- [ 3.214660] Key type ._fscrypt registered
- [ 3.218146] Key type .fscrypt registered
- [ 3.222038] Key type fscrypt-provisioning registered
- [ 3.228411] Btrfs loaded, crc32c=crc32c-generic
- [ 3.235334] mmc1: new HS200 MMC card at address 0001
- [ 3.237090] mmcblk1: mmc1:0001 BAH38G 7.28 GiB
- [ 3.241225] mmcblk1boot0: mmc1:0001 BAH38G partition 1 4.00 MiB
- [ 3.247035] Key type encrypted registered
- [ 3.247142] mmcblk1boot1: mmc1:0001 BAH38G partition 2 4.00 MiB
- [ 3.250666] AppArmor: AppArmor sha1 policy hashing enabled
- [ 3.256810] mmcblk1rpmb: mmc1:0001 BAH38G partition 3 4.00 MiB, chardev (241:0)
- [ 3.277749] meson-drm d0100000.vpu: Queued 3 outputs on vpu
- [ 3.278060] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.310867] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
- [ 3.315553] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
- [ 3.323614] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
- [ 3.330854] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
- [ 3.414531] random: fast init done
- [ 3.446138] [drm] kms: can't enable cloning when we probably wanted to.
- [ 3.650118] Console: switching to colour frame buffer device 240x67
- [ 3.676081] meson-drm d0100000.vpu: fb0: mesondrmfb frame buffer device
- [ 3.683630] libphy: mdio_mux: probed
- [ 3.692249] libphy: mdio_mux: probed
- [ 3.692770] phy phy-d0078080.phy.2: unsupported PHY mode 5
- [ 3.697757] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.701170] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 3.708885] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
- [ 3.718110] xhci-hcd xhci-hcd.0.auto: irq 41, io mem 0xc9000000
- [ 3.724180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
- [ 3.732127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.739283] usb usb1: Product: xHCI Host Controller
- [ 3.744104] usb usb1: Manufacturer: Linux 5.7.6-arm-64 xhci-hcd
- [ 3.749973] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 3.755266] hub 1-0:1.0: USB hub found
- [ 3.758522] hub 1-0:1.0: 2 ports detected
- [ 3.762783] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.767924] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 3.775520] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 3.782031] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.790082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
- [ 3.798186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.805346] usb usb2: Product: xHCI Host Controller
- [ 3.810171] usb usb2: Manufacturer: Linux 5.7.6-arm-64 xhci-hcd
- [ 3.816040] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 3.821351] hub 2-0:1.0: USB hub found
- [ 3.824609] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 3.833571] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
- [ 3.863753] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
- [ 3.872273] meson-gx-mmc d0070000.mmc: card claims to support voltages below defined range
- [ 3.876194] debugfs: Directory 'c1105400.audio-controller' with parent 'GXL-S905X-P212' already present!
- [ 3.884728] gx-sound-card sound: snd-soc-dummy-dai <-> I2S FIFO mapping ok
- [ 3.891948] gx-sound-card sound: CODEC CTRL HDMI I2S IN <-> I2S Encoder mapping ok
- [ 3.898936] gx-sound-card sound: i2s-hifi <-> CODEC CTRL HDMI OUT mapping ok
- [ 3.905911] gx-sound-card sound: ASoC: no DMI vendor name!
- [ 3.912130] printk: console [netcon0] enabled
- [ 3.915490] netconsole: network logging started
- [ 3.920336] ALSA device list:
- [ 3.921420] mmc2: new high speed SDIO card at address 0001
- [ 3.925178] #0: GXL-S905X-P212
- [ 3.937176] Freeing unused kernel memory: 3392K
- [ 3.943016] Run /init as init process
- [ 3.948947] with arguments:
- [ 3.948950] /init
- [ 3.948951] with environment:
- [ 3.948953] HOME=/
- [ 3.948955] TERM=linux
- [ 3.948957] mac=48:A0:F8:F4:B3:00
- [ 4.094863] usb 1-2: new high-speed USB device number 2 using xhci-hcd
- [ 4.248781] usb 1-2: New USB device found, idVendor=413c, idProduct=9013, bcdDevice= 1.00
- [ 4.256340] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 4.263310] usb 1-2: Product: USB Portable HDD
- [ 4.268162] usb 1-2: Manufacturer: Dell
- [ 4.273307] usb 1-2: SerialNumber: NA52SGF9
- [ 4.416513] scsi host0: uas
- [ 4.421776] usbcore: registered new interface driver uas
- [ 4.422786] scsi 0:0:0:0: Direct-Access Dell USB Portable HDD 040D PQ: 0 ANSI: 6
- [ 4.436489] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 4.442367] sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 5.292350] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback
- [ 6.314960] systemd[1]: System time before build time, advancing clock.
- [ 6.426643] NET: Registered protocol family 10
- [ 6.451356] Segment Routing with IPv6
- [ 6.511753] systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 6.547448] systemd[1]: Detected architecture arm64.
- [ 6.610834] systemd[1]: Set hostname to <arm-64>.
- [ 7.100551] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
- [ 7.146296] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.153738] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
- [ 7.154189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.164604] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
- [ 7.201365] sda: sda1
- [ 7.211573] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 7.441136] random: systemd: uninitialized urandom read (16 bytes read)
- [ 7.452253] systemd[1]: Created slice system-modprobe.slice.
- [ 7.464135] random: systemd: uninitialized urandom read (16 bytes read)
- [ 7.471884] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 7.484060] random: systemd: uninitialized urandom read (16 bytes read)
- [ 7.491720] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 7.505310] systemd[1]: Created slice User and Session Slice.
- [ 7.517296] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 7.531313] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 7.543430] systemd[1]: Reached target User and Group Name Lookups.
- [ 7.556319] systemd[1]: Reached target Remote File Systems.
- [ 7.568657] systemd[1]: Reached target Slices.
- [ 7.580998] systemd[1]: Reached target Swap.
- [ 7.593212] systemd[1]: Reached target System Time Set.
- [ 7.605996] systemd[1]: Listening on Syslog Socket.
- [ 7.618947] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 7.632847] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 7.647104] systemd[1]: Listening on Journal Audit Socket.
- [ 7.660159] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 7.673580] systemd[1]: Listening on Journal Socket.
- [ 7.686684] systemd[1]: Listening on udev Control Socket.
- [ 7.699466] systemd[1]: Listening on udev Kernel Socket.
- [ 7.715648] systemd[1]: Mounting Huge Pages File System...
- [ 7.731852] systemd[1]: Mounting POSIX Message Queue File System...
- [ 7.748848] systemd[1]: Mounting Kernel Debug File System...
- [ 7.761619] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 7.775524] systemd[1]: Starting Restore / save the current clock...
- [ 7.792141] systemd[1]: Starting Set the console keyboard layout...
- [ 7.809705] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 7.825283] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
- [ 7.829019] systemd[1]: Started Nameserver information manager.
- [ 7.846736] systemd[1]: Reached target Network (Pre).
- [ 7.863667] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 7.874648] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 7.890580] systemd[1]: Starting Load Kernel Modules...
- [ 7.906416] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 7.923292] systemd[1]: Starting udev Coldplug all Devices...
- [ 7.933573] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
- [ 7.948288] systemd[1]: Mounted Huge Pages File System.
- [ 7.960643] systemd[1]: Mounted POSIX Message Queue File System.
- [ 7.973251] systemd[1]: Mounted Kernel Debug File System.
- [ 7.987135] systemd[1]: Finished Restore / save the current clock.
- [ 8.001468] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 8.020862] systemd[1]: Finished Load Kernel Modules.
- [ 8.034456] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 8.048518] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- [ 8.061877] systemd[1]: Mounting Kernel Configuration File System...
- [ 8.076310] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 8.085127] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 8.098778] systemd[1]: Starting Load/Save Random Seed...
- [ 8.114722] systemd[1]: Starting Apply Kernel Variables...
- [ 8.130841] systemd[1]: Starting Create System Users...
- [ 8.148226] systemd[1]: Finished Set the console keyboard layout.
- [ 8.164098] systemd[1]: Mounted Kernel Configuration File System.
- [ 8.186539] systemd[1]: Finished Apply Kernel Variables.
- [ 8.311317] systemd[1]: Finished udev Coldplug all Devices.
- [ 8.328179] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
- [ 8.369175] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
- [ 8.411738] systemd[1]: Finished Create System Users.
- [ 8.423076] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 8.478788] systemd[1]: Finished Create Static Device Nodes in /dev.
- [ 8.488783] systemd[1]: Reached target Local File Systems (Pre).
- [ 8.503176] systemd[1]: Mounting /tmp...
- [ 8.513496] systemd[1]: Starting udev Kernel Device Manager...
- [ 8.522640] systemd[1]: Mounted /tmp.
- [ 8.749976] systemd[1]: Started udev Kernel Device Manager.
- [ 8.762461] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
- [ 8.762994] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 8.769576] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
- [ 8.769698] systemd[1]: Reached target Local Encrypted Volumes.
- [ 9.084366] systemd[1]: Found device /dev/ttyS2.
- [ 9.120777] mc: Linux media interface: v0.10
- [ 9.149060] videodev: Linux video capture interface: v2.00
- [ 9.164708] systemd[1]: Found device /dev/ttyAML0.
- [ 9.176558] Registered IR keymap rc-empty
- [ 9.176648] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
- [ 9.176828] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
- [ 9.176962] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input0
- [ 9.179665] meson-ir c8100580.ir: receiver initialized
- [ 9.229395] Bluetooth: Core ver 2.22
- [ 9.229401] Bluetooth: Starting self testing
- [ 9.259498] Bluetooth: ECDH test passed in 29375 usecs
- [ 9.262326] Bluetooth: SMP test passed in 2698 usecs
- [ 9.262356] Bluetooth: Finished self testing
- [ 9.262447] NET: Registered protocol family 31
- [ 9.262451] Bluetooth: HCI device and connection manager initialized
- [ 9.262467] Bluetooth: HCI socket layer initialized
- [ 9.262474] Bluetooth: L2CAP socket layer initialized
- [ 9.262495] Bluetooth: SCO socket layer initialized
- [ 9.298243] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 9.321201] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 9.321693] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- [ 9.321981] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 9.322186] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
- [ 9.322252] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
- [ 9.322564] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 9.322635] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 9.322749] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 9.322900] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 9.331132] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
- [ 9.331173] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
- [ 9.331206] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
- [ 9.331241] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
- [ 9.331274] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
- [ 9.331282] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
- [ 9.331901] lima d00c0000.gpu: bus rate = 166666667
- [ 9.331909] lima d00c0000.gpu: mod rate = 24000000
- [ 9.331999] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
- [ 9.333092] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
- [ 9.429250] Bluetooth: HCI UART driver ver 2.3
- [ 9.429258] Bluetooth: HCI UART protocol H4 registered
- [ 9.429260] Bluetooth: HCI UART protocol BCSP registered
- [ 9.429324] Bluetooth: HCI UART protocol LL registered
- [ 9.429327] Bluetooth: HCI UART protocol ATH3K registered
- [ 9.429355] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 9.429579] Bluetooth: HCI UART protocol Intel registered
- [ 9.429991] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
- [ 9.430064] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
- [ 9.430338] Bluetooth: HCI UART protocol Broadcom registered
- [ 9.430393] Bluetooth: HCI UART protocol QCA registered
- [ 9.430396] Bluetooth: HCI UART protocol AG6XX registered
- [ 9.430423] Bluetooth: HCI UART protocol Marvell registered
- [ 9.505585] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 9.560710] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 9.561172] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- [ 9.561471] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 9.561715] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
- [ 9.561805] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
- [ 9.562175] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 9.562308] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 9.562518] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 9.562691] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 9.562990] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 9.598046] systemd[1]: Found device /dev/disk/by-label/BOOT.
- [ 9.610191] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT...
- [ 9.646513] systemd[1]: Started File System Check Daemon to report status.
- [ 9.866610] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 9.866999] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ 9.873755] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
- [ 9.874181] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 9.874245] RTL871X: module init start
- [ 9.874248] RTL871X: rtl8189fs v4.3.24.8_22657.20170607
- [ 9.874504] RTL871X: CHIP TYPE: RTL8188F
- [ 9.874523] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped.
- [ 9.874678] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped.
- [ 9.874737] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
- [ 9.874743] RTL871X: Chip Version Info: CHIP_8188F_Normal_Chip_SMIC_B_CUT_1T1R_RomVer(0)
- [ 9.874897] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 9.875131] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 9.875242] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 9.875397] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 9.875508] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 9.876425] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 9.876431] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 9.876595] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 9.876597] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 9.876638] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 9.876668] RTL871X: EEPROM type is E-FUSE
- [ 9.876852] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
- [ 9.881728] random: crng init done
- [ 9.881736] random: 7 urandom warning(s) missed due to ratelimiting
- [ 9.886780] systemd[1]: Starting Load/Save RF Kill Switch Status...
- [ 9.903461] RTL871X: hal_ReadEFuse_WiFi: data end at address=0xa0
- [ 9.903489] RTL871X: HW EFUSE
- [ 9.903491] RTL871X: 0x000:
- [ 9.903493] 29
- [ 9.903494] 81
- [ 9.903495] 03
- [ 9.903497] CC
- [ 9.903498] 00
- [ 9.903499] 00
- [ 9.903501] 50
- [ 9.903502] 00
- [ 9.903503] 00
- [ 9.903505] 00
- [ 9.903506] 04
- [ 9.903507] CC
- [ 9.903508] 0A
- [ 9.903510] 0C
- [ 9.903511] 00
- [ 9.903512] 00
- [ 9.903514] RTL871X: 0x010:
- [ 9.903515] 26
- [ 9.903516] 25
- [ 9.903517] 25
- [ 9.903519] 27
- [ 9.903520] 28
- [ 9.903521] 28
- [ 9.903523] 29
- [ 9.903524] 29
- [ 9.903525] 2A
- [ 9.903526] 28
- [ 9.903528] 28
- [ 9.903529] 13
- [ 9.903530] FF
- [ 9.903532] FF
- [ 9.903533] FF
- [ 9.903534] FF
- [ 9.903536] RTL871X: 0x020:
- [ 9.903537] FF
- [ 9.903538] FF
- [ 9.903539] FF
- [ 9.903540] FF
- [ 9.903542] FF
- [ 9.903543] FF
- [ 9.903544] FF
- [ 9.903546] FF
- [ 9.903547] FF
- [ 9.903548] FF
- [ 9.903550] FF
- [ 9.903551] FF
- [ 9.903552] FF
- [ 9.903553] FF
- [ 9.903555] FF
- [ 9.903556] FF
- [ 9.903557] RTL871X: 0x030:
- [ 9.903558] FF
- [ 9.903560] FF
- [ 9.903561] FF
- [ 9.903562] FF
- [ 9.903563] FF
- [ 9.903565] FF
- [ 9.903566] FF
- [ 9.903567] FF
- [ 9.903568] FF
- [ 9.903570] FF
- [ 9.903571] FF
- [ 9.903572] FF
- [ 9.903573] FF
- [ 9.903575] FF
- [ 9.903576] FF
- [ 9.903577] FF
- [ 9.903579] RTL871X: 0x040:
- [ 9.903580] FF
- [ 9.903581] FF
- [ 9.903582] FF
- [ 9.903583] FF
- [ 9.903585] FF
- [ 9.903586] FF
- [ 9.903587] FF
- [ 9.903589] FF
- [ 9.903590] FF
- [ 9.903591] FF
- [ 9.903592] FF
- [ 9.903594] FF
- [ 9.903595] FF
- [ 9.903596] FF
- [ 9.903598] FF
- [ 9.903599] FF
- [ 9.903600] RTL871X: 0x050:
- [ 9.903601] FF
- [ 9.903603] FF
- [ 9.903604] FF
- [ 9.903605] FF
- [ 9.903606] FF
- [ 9.903608] FF
- [ 9.903609] FF
- [ 9.903610] FF
- [ 9.903612] FF
- [ 9.903613] FF
- [ 9.903614] FF
- [ 9.903615] FF
- [ 9.903617] FF
- [ 9.903618] FF
- [ 9.903619] FF
- [ 9.903620] FF
- [ 9.903622] RTL871X: 0x060:
- [ 9.903623] FF
- [ 9.903624] FF
- [ 9.903626] FF
- [ 9.903627] FF
- [ 9.903628] FF
- [ 9.903629] FF
- [ 9.903631] FF
- [ 9.903632] FF
- [ 9.903633] FF
- [ 9.903635] FF
- [ 9.903636] FF
- [ 9.903637] FF
- [ 9.903638] FF
- [ 9.903640] FF
- [ 9.903641] FF
- [ 9.903642] FF
- [ 9.903643] RTL871X: 0x070:
- [ 9.903644] FF
- [ 9.903646] FF
- [ 9.903647] FF
- [ 9.903648] FF
- [ 9.903649] FF
- [ 9.903651] FF
- [ 9.903652] FF
- [ 9.903653] FF
- [ 9.903655] FF
- [ 9.903656] FF
- [ 9.903657] FF
- [ 9.903659] FF
- [ 9.903660] FF
- [ 9.903661] FF
- [ 9.903663] FF
- [ 9.903664] FF
- [ 9.903665] RTL871X: 0x080:
- [ 9.903666] FF
- [ 9.903667] FF
- [ 9.903669] FF
- [ 9.903670] FF
- [ 9.903671] FF
- [ 9.903673] FF
- [ 9.903674] FF
- [ 9.903675] FF
- [ 9.903676] FF
- [ 9.903678] FF
- [ 9.903679] FF
- [ 9.903680] FF
- [ 9.903682] FF
- [ 9.903683] FF
- [ 9.903684] FF
- [ 9.903686] FF
- [ 9.903687] RTL871X: 0x090:
- [ 9.903688] FF
- [ 9.903689] FF
- [ 9.903690] FF
- [ 9.903692] FF
- [ 9.903693] FF
- [ 9.903694] FF
- [ 9.903696] FF
- [ 9.903697] FF
- [ 9.903698] FF
- [ 9.903699] FF
- [ 9.903701] FF
- [ 9.903702] FF
- [ 9.903703] FF
- [ 9.903704] FF
- [ 9.903706] FF
- [ 9.903707] FF
- [ 9.903708] RTL871X: 0x0a0:
- [ 9.903709] FF
- [ 9.903711] FF
- [ 9.903712] FF
- [ 9.903713] FF
- [ 9.903714] FF
- [ 9.903716] FF
- [ 9.903717] FF
- [ 9.903718] FF
- [ 9.903720] FF
- [ 9.903721] FF
- [ 9.903722] FF
- [ 9.903723] FF
- [ 9.903725] FF
- [ 9.903726] FF
- [ 9.903727] FF
- [ 9.903729] FF
- [ 9.903730] RTL871X: 0x0b0:
- [ 9.903731] FF
- [ 9.903732] FF
- [ 9.903733] FF
- [ 9.903735] FF
- [ 9.903736] FF
- [ 9.903737] FF
- [ 9.903739] FF
- [ 9.903740] FF
- [ 9.903741] 20
- [ 9.903742] 35
- [ 9.903744] 1F
- [ 9.903745] 00
- [ 9.903746] 00
- [ 9.903747] 00
- [ 9.903749] 00
- [ 9.903750] FF
- [ 9.903751] RTL871X: 0x0c0:
- [ 9.903752] FF
- [ 9.903754] 12
- [ 9.903755] 00
- [ 9.903756] 10
- [ 9.903758] 00
- [ 9.903759] FF
- [ 9.903760] 00
- [ 9.903761] FF
- [ 9.903763] 00
- [ 9.903764] 00
- [ 9.903765] FF
- [ 9.903767] FF
- [ 9.903768] FF
- [ 9.903769] FF
- [ 9.903770] FF
- [ 9.903772] FF
- [ 9.903773] RTL871X: 0x0d0:
- [ 9.903774] 3E
- [ 9.903775] 10
- [ 9.903777] 01
- [ 9.903778] 12
- [ 9.903779] 23
- [ 9.903780] FF
- [ 9.903782] FF
- [ 9.903783] FF
- [ 9.903784] 20
- [ 9.903785] 04
- [ 9.903787] 4C
- [ 9.903788] 02
- [ 9.903789] 79
- [ 9.903790] F1
- [ 9.903792] 21
- [ 9.903793] 02
- [ 9.903794] RTL871X: 0x0e0:
- [ 9.903795] 0C
- [ 9.903797] 00
- [ 9.903798] 22
- [ 9.903799] 04
- [ 9.903800] 00
- [ 9.903802] 08
- [ 9.903803] 00
- [ 9.903804] 32
- [ 9.903805] FF
- [ 9.903807] 21
- [ 9.903808] 02
- [ 9.903809] 0C
- [ 9.903811] 00
- [ 9.903812] 22
- [ 9.903813] 2A
- [ 9.903815] 01
- [ 9.903816] RTL871X: 0x0f0:
- [ 9.903817] 01
- [ 9.903818] 00
- [ 9.903820] 00
- [ 9.903821] 00
- [ 9.903822] 00
- [ 9.903823] 00
- [ 9.903824] 00
- [ 9.903826] 00
- [ 9.903827] 00
- [ 9.903828] 00
- [ 9.903830] 00
- [ 9.903831] 00
- [ 9.903832] 02
- [ 9.903833] 00
- [ 9.903835] FF
- [ 9.903836] FF
- [ 9.903837] RTL871X: 0x100:
- [ 9.903838] 00
- [ 9.903839] 00
- [ 9.903841] 00
- [ 9.903842] 00
- [ 9.903843] 00
- [ 9.903844] 00
- [ 9.903845] 00
- [ 9.903847] 00
- [ 9.903848] 00
- [ 9.903849] 00
- [ 9.903850] 00
- [ 9.903852] 00
- [ 9.903853] 00
- [ 9.903854] 00
- [ 9.903856] 00
- [ 9.903857] 00
- [ 9.903858] RTL871X: 0x110:
- [ 9.903859] 00
- [ 9.903860] EB
- [ 9.903862] 00
- [ 9.903863] 6E
- [ 9.903864] 01
- [ 9.903865] 00
- [ 9.903867] 00
- [ 9.903868] 00
- [ 9.903869] 00
- [ 9.903871] FF
- [ 9.903872] 48
- [ 9.903873] A0
- [ 9.903874] F8
- [ 9.903876] F4
- [ 9.903877] B3
- [ 9.903878] 01
- [ 9.903880] RTL871X: 0x120:
- [ 9.903881] FF
- [ 9.903882] FF
- [ 9.903883] FF
- [ 9.903884] FF
- [ 9.903886] FF
- [ 9.903887] FF
- [ 9.903889] FF
- [ 9.903890] FF
- [ 9.903891] FF
- [ 9.903892] FF
- [ 9.903894] FF
- [ 9.903895] FF
- [ 9.903897] FF
- [ 9.903898] FF
- [ 9.903899] FF
- [ 9.903900] FF
- [ 9.903902] RTL871X: 0x130:
- [ 9.903903] FF
- [ 9.903904] FF
- [ 9.903905] FF
- [ 9.903906] FF
- [ 9.903908] FF
- [ 9.903909] FF
- [ 9.903910] FF
- [ 9.903911] FF
- [ 9.903913] FF
- [ 9.903914] FF
- [ 9.903915] FF
- [ 9.903916] FF
- [ 9.903918] FF
- [ 9.903919] FF
- [ 9.903920] FF
- [ 9.903922] FF
- [ 9.903923] RTL871X: 0x140:
- [ 9.903924] FF
- [ 9.903925] FF
- [ 9.903927] FF
- [ 9.903928] FF
- [ 9.903929] FF
- [ 9.903930] FF
- [ 9.903932] FF
- [ 9.903933] FF
- [ 9.903934] FF
- [ 9.903936] FF
- [ 9.903937] FF
- [ 9.903938] FF
- [ 9.903940] FF
- [ 9.903941] FF
- [ 9.903942] FF
- [ 9.903944] FF
- [ 9.903945] RTL871X: 0x150:
- [ 9.903946] FF
- [ 9.903947] FF
- [ 9.903948] FF
- [ 9.903950] FF
- [ 9.903951] FF
- [ 9.903952] FF
- [ 9.903954] FF
- [ 9.903955] FF
- [ 9.903956] FF
- [ 9.903958] FF
- [ 9.903959] FF
- [ 9.903960] FF
- [ 9.903961] FF
- [ 9.903963] FF
- [ 9.903964] FF
- [ 9.903965] FF
- [ 9.903967] RTL871X: 0x160:
- [ 9.903968] FF
- [ 9.903969] FF
- [ 9.903970] FF
- [ 9.903971] FF
- [ 9.903973] FF
- [ 9.903974] FF
- [ 9.903975] FF
- [ 9.903977] FF
- [ 9.903978] FF
- [ 9.903979] FF
- [ 9.903980] FF
- [ 9.903982] FF
- [ 9.903983] FF
- [ 9.903984] FF
- [ 9.903985] FF
- [ 9.903987] FF
- [ 9.903988] RTL871X: 0x170:
- [ 9.903989] FF
- [ 9.903990] FF
- [ 9.903991] FF
- [ 9.903993] FF
- [ 9.903994] FF
- [ 9.903995] FF
- [ 9.903996] FF
- [ 9.903998] FF
- [ 9.903999] FF
- [ 9.904000] FF
- [ 9.904002] FF
- [ 9.904003] FF
- [ 9.904004] FF
- [ 9.904006] FF
- [ 9.904007] FF
- [ 9.904008] FF
- [ 9.904009] RTL871X: 0x180:
- [ 9.904010] FF
- [ 9.904012] FF
- [ 9.904013] FF
- [ 9.904014] FF
- [ 9.904016] FF
- [ 9.904017] FF
- [ 9.904018] FF
- [ 9.904019] FF
- [ 9.904021] FF
- [ 9.904022] FF
- [ 9.904023] FF
- [ 9.904025] FF
- [ 9.904026] FF
- [ 9.904027] FF
- [ 9.904029] FF
- [ 9.904030] FF
- [ 9.904031] RTL871X: 0x190:
- [ 9.904032] FF
- [ 9.904033] FF
- [ 9.904035] FF
- [ 9.904036] FF
- [ 9.904037] FF
- [ 9.904038] FF
- [ 9.904040] FF
- [ 9.904041] FF
- [ 9.904043] FF
- [ 9.904044] FF
- [ 9.904045] FF
- [ 9.904047] FF
- [ 9.904048] FF
- [ 9.904049] FF
- [ 9.904050] FF
- [ 9.904052] FF
- [ 9.904053] RTL871X: 0x1a0:
- [ 9.904054] FF
- [ 9.904055] FF
- [ 9.904057] FF
- [ 9.904058] FF
- [ 9.904059] FF
- [ 9.904060] FF
- [ 9.904062] FF
- [ 9.904063] FF
- [ 9.904064] FF
- [ 9.904066] FF
- [ 9.904067] FF
- [ 9.904068] FF
- [ 9.904069] FF
- [ 9.904071] FF
- [ 9.904072] FF
- [ 9.904073] FF
- [ 9.904075] RTL871X: 0x1b0:
- [ 9.904076] FF
- [ 9.904077] FF
- [ 9.904078] FF
- [ 9.904080] FF
- [ 9.904081] FF
- [ 9.904082] FF
- [ 9.904084] FF
- [ 9.904085] FF
- [ 9.904086] FF
- [ 9.904088] FF
- [ 9.904089] FF
- [ 9.904103] FF
- [ 9.904107] FF
- [ 9.904108] FF
- [ 9.904109] FF
- [ 9.904111] FF
- [ 9.904112] RTL871X: 0x1c0:
- [ 9.904113] FF
- [ 9.904114] FF
- [ 9.904116] FF
- [ 9.904117] FF
- [ 9.904118] FF
- [ 9.904120] FF
- [ 9.904121] FF
- [ 9.904122] FF
- [ 9.904123] FF
- [ 9.904125] FF
- [ 9.904126] FF
- [ 9.904127] FF
- [ 9.904129] FF
- [ 9.904130] FF
- [ 9.904131] FF
- [ 9.904132] FF
- [ 9.904134] RTL871X: 0x1d0:
- [ 9.904135] FF
- [ 9.904136] FF
- [ 9.904137] FF
- [ 9.904138] FF
- [ 9.904140] FF
- [ 9.904141] FF
- [ 9.904142] FF
- [ 9.904143] FF
- [ 9.904145] FF
- [ 9.904146] FF
- [ 9.904147] FF
- [ 9.904148] FF
- [ 9.904150] FF
- [ 9.904151] FF
- [ 9.904152] FF
- [ 9.904154] FF
- [ 9.904155] RTL871X: 0x1e0:
- [ 9.904156] FF
- [ 9.904157] FF
- [ 9.904158] FF
- [ 9.904160] FF
- [ 9.904161] FF
- [ 9.904162] FF
- [ 9.904163] FF
- [ 9.904165] FF
- [ 9.904166] FF
- [ 9.904167] FF
- [ 9.904169] FF
- [ 9.904170] FF
- [ 9.904171] FF
- [ 9.904172] FF
- [ 9.904174] FF
- [ 9.904175] FF
- [ 9.904177] RTL871X: 0x1f0:
- [ 9.904178] FF
- [ 9.904179] FF
- [ 9.904180] FF
- [ 9.904181] FF
- [ 9.904183] FF
- [ 9.904184] FF
- [ 9.904185] FF
- [ 9.904187] FF
- [ 9.904188] FF
- [ 9.904189] FF
- [ 9.904190] FF
- [ 9.904192] FF
- [ 9.904193] FF
- [ 9.904194] FF
- [ 9.904196] FF
- [ 9.904197] FF
- [ 9.904214] RTL871X: hal_com_config_channel_plan chplan:0x20
- [ 9.904504] RTL871X: kfree flag:1
- [ 9.904506] RTL871X: bb_gain:1
- [ 9.904573] RTL871X: rtl8188f_FirmwareDownload((null)) tmp_ps=3
- [ 9.904578] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 9.904598] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 9.904600] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 9.904601] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 9.979447] systemd[1]: Finished Load/Save Random Seed.
- [ 10.001382] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x07050105
- [ 10.001623] RTL871X: _8051Reset8188: Finish
- [ 10.015129] RTL871X: _FWFreeToGo: Polling FW ready OK! (279, 16ms), REG_MCUFWDL:0x070501c6
- [ 10.015134] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 10.015138] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 112ms
- [ 10.015158] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 10.026501] RTL871X: hal_read_mac_hidden_rpt OK! (2, 8ms), fwdl:1, id:0x19
- [ 10.026809] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 10.026813] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 10.027208] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 10.027213] RTL871X: rtw_hal_read_chip_info in 156 ms
- [ 10.027326] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
- [ 10.027781] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
- [ 10.027841] RTL871X: Init_ODM_ComInfo_8188f(): fab_ver=0 cut_ver=1
- [ 10.027849] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
- [ 10.027939] RTL871X: phy_ConfigBBWithPgParaFile(): No File PHY_REG_PG.txt, Load from HWImg Array!
- [ 10.027949] RTL871X: default power by rate loaded
- [ 10.028294] RTL871X: rtw_macaddr_cfg mac addr:48:a0:f8:f4:b3:01
- [ 10.028346] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
- [ 10.028393] RTL871X: rtw_wiphy_alloc(phy0)
- [ 10.028397] RTL871X: rtw_wdev_alloc(padapter=00000000136b5add)
- [ 10.028401] RTL871X: rtw_wiphy_register(phy0)
- [ 10.028403] RTL871X: Register RTW cfg80211 vendor cmd(0x67) interface
- [ 10.028815] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=48:a0:f8:f4:b3:01
- [ 10.029598] RTL871X: cfg80211_rtw_get_txpower
- [ 10.029965] RTL871X: module init ret=0
- [ 10.051437] systemd[1]: Started Load/Save RF Kill Switch Status.
- [ 10.067975] systemd[1]: Found device /sys/subsystem/net/devices/eth0.
- [ 10.648544] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT.
- [ 10.662077] systemd[1]: Mounting /boot...
- [ 10.737283] systemd[1]: Mounted /boot.
- [ 10.746248] systemd[1]: Reached target Local File Systems.
- [ 10.757705] systemd[1]: Starting Armbian ZRAM config...
- [ 10.768359] systemd[1]: Starting Set console font and keymap...
- [ 10.778592] systemd[1]: Started ifup for eth0.
- [ 10.788873] systemd[1]: Starting Raise network interfaces...
- [ 10.800731] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
- [ 10.810761] systemd[1]: Starting Mark the need to relabel after reboot...
- [ 10.816673] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
- [ 10.816892] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
- [ 10.820199] systemd[1]: Finished Set console font and keymap.
- [ 10.864522] systemd[1]: plymouth-read-write.service: Succeeded.
- [ 10.868733] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
- [ 10.882433] systemd[1]: Finished Mark the need to relabel after reboot.
- [ 11.215389] zram: Added device: zram0
- [ 11.216079] zram: Added device: zram1
- [ 11.217235] zram: Added device: zram2
- [ 11.255988] zram1: detected capacity change from 0 to 911904768
- [ 11.297700] meson8b-dwmac c9410000.ethernet eth0: PHY [0.e40908ff:08] driver [Meson GXL Internal PHY] (irq=42)
- [ 11.306839] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
- [ 11.306864] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
- [ 11.306872] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
- [ 11.330993] Adding 890528k swap on /dev/zram1. Priority:5 extents:1 across:890528k SSFS
- [ 11.331155] systemd[1]: Finished Raise network interfaces.
- [ 11.439406] zram0: detected capacity change from 0 to 52428800
- [ 11.511042] systemd[1]: Finished Armbian ZRAM config.
- [ 11.526045] systemd[1]: Starting Armbian memory supported logging...
- [ 11.593773] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
- [ 11.593809] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
- [ 11.678867] Bluetooth: hci0: command 0xfc18 tx timeout
- [ 12.794680] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 12.794717] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 13.683020] systemd[1]: Finished Armbian memory supported logging.
- [ 13.694282] systemd[1]: Starting Journal Service...
- [ 14.381652] systemd[1]: Started Journal Service.
- [ 14.415547] systemd-journald[699]: Received client request to flush runtime journal.
- [ 15.828894] EXT4-fs (mmcblk0p2): resizing filesystem from 1144832 to 7674836 blocks
- [ 19.678822] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
- [ 19.678827] Bluetooth: hci0: Failed to set baudrate
- [ 21.694825] Bluetooth: hci0: command 0x0c03 tx timeout
- [ 26.796492] EXT4-fs (mmcblk0p2): resized to 2621440 blocks
- [ 29.918820] Bluetooth: hci0: BCM: Reset failed (-110)
- [ 38.265637] EXT4-fs (mmcblk0p2): resized to 3670016 blocks
- [ 51.026742] EXT4-fs (mmcblk0p2): resized to 5242880 blocks
- [ 63.166521] EXT4-fs (mmcblk0p2): resized to 6815744 blocks
- [ 69.130520] EXT4-fs (mmcblk0p2): resized filesystem to 7674836
- [ 73.109375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 73.109381] Bluetooth: BNEP filters: protocol multicast
- [ 73.109394] Bluetooth: BNEP socket layer initialized
- [ 74.757317] RTL871X: cfg80211_rtw_get_txpower
- [ 74.768219] RTL871X: +871x_drv - drv_open, bup=0
- [ 74.771530] RTL871X: FW does not exist before power on!!
- [ 74.771978] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 74.773488] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 74.773494] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 74.773670] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 74.773675] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 74.773725] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 74.773727] RTL871X: Power on ok!
- [ 74.773848] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 74.773855] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 74.773860] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 74.773862] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 74.773864] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 74.863394] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050105
- [ 74.863627] RTL871X: _8051Reset8188: Finish
- [ 74.877190] RTL871X: _FWFreeToGo: Polling FW ready OK! (222, 12ms), REG_MCUFWDL:0x000501c6
- [ 74.877197] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 74.877200] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 104ms
- [ 74.877229] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 74.877233] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 74.877235] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 75.370349] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 75.370404] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 75.370640] RTL871X: kfree gain_offset 0x55:0x82060
- [ 75.371287] RTL871X: after :0x86070
- [ 75.371297] RTL871X: MAC Address = 48:a0:f8:f4:b3:01
- [ 75.371547] RTL871X: start rtl8188fs_xmit_thread(wlan0)
- [ 75.371670] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
- [ 75.371676] RTL871X: [HT] HAL Support STBC = 0x01
- [ 75.371691] RTL871X: -871x_drv - drv_open, bup=1
- [ 75.372052] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
- [ 75.372838] RTL871X: cfg80211_rtw_get_txpower
- [ 75.373527] RTL871X: cfg80211_rtw_get_txpower
- [ 75.373663] RTL871X: cfg80211_rtw_dump_station(wlan0)
- [ 75.373669] RTL871X: Station is not found
- [ 75.521683] RTL871X: cfg80211_rtw_get_txpower
- [ 75.521745] RTL871X: cfg80211_rtw_get_txpower
- [ 75.522136] RTL871X: cfg80211_rtw_get_txpower
- [ 75.522174] RTL871X: cfg80211_rtw_get_txpower
- [ 75.523660] RTL871X: cfg80211_rtw_get_txpower
- [ 75.555615] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
- [ 75.693625] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 77.288326] RTL871X: survey done event(c) band:0 for wlan0
- [ 77.288361] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 77.293083] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 77.293091] RTL871X: ==>ips_enter cnts:1
- [ 77.293093] RTL871X: nolinked power save enter
- [ 77.293094] RTL871X: ===> rtw_ips_pwr_down...................
- [ 77.293096] RTL871X: ====> rtw_ips_dev_unload...
- [ 77.302025] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 77.302032] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 77.302344] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 77.302348] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 79.006287] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 79.006300] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 79.006305] RTL871X: ==>ips_leave cnts:1
- [ 79.006307] RTL871X: ===> rtw_ips_pwr_up..............
- [ 79.006317] RTL871X: ===> ips_netdrv_open.........
- [ 79.006456] RTL871X: FW does not exist before power on!!
- [ 79.007472] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 79.008956] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 79.008959] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 79.009086] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 79.009088] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 79.009124] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 79.009126] RTL871X: Power on ok!
- [ 79.009223] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 79.009227] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 79.009231] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 79.009233] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 79.009235] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 79.081612] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 79.081809] RTL871X: _8051Reset8188: Finish
- [ 79.095298] RTL871X: _FWFreeToGo: Polling FW ready OK! (301, 16ms), REG_MCUFWDL:0x000505c6
- [ 79.095304] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 79.095308] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 88ms
- [ 79.095325] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 79.095328] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 79.095330] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 79.582161] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 79.582219] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 79.582462] RTL871X: kfree gain_offset 0x55:0x82060
- [ 79.583050] RTL871X: after :0x86070
- [ 79.583201] RTL871X: <=== rtw_ips_pwr_up.............. in 580ms
- [ 79.583211] RTL871X: nolinked power save leave
- [ 79.583263] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 81.176235] RTL871X: survey done event(8) band:0 for wlan0
- [ 81.176281] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 81.185270] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 81.185277] RTL871X: ==>ips_enter cnts:2
- [ 81.185279] RTL871X: nolinked power save enter
- [ 81.185281] RTL871X: ===> rtw_ips_pwr_down...................
- [ 81.185283] RTL871X: ====> rtw_ips_dev_unload...
- [ 81.194010] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 81.194017] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 81.194347] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 81.194351] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 102.016426] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 102.016439] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 102.016444] RTL871X: ==>ips_leave cnts:2
- [ 102.016446] RTL871X: ===> rtw_ips_pwr_up..............
- [ 102.016457] RTL871X: ===> ips_netdrv_open.........
- [ 102.016619] RTL871X: FW does not exist before power on!!
- [ 102.017035] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 102.018489] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 102.018492] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 102.018646] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 102.018649] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 102.018691] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 102.018694] RTL871X: Power on ok!
- [ 102.019765] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 102.019775] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 102.019780] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 102.019782] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 102.019784] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 102.097540] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 102.097768] RTL871X: _8051Reset8188: Finish
- [ 102.111285] RTL871X: _FWFreeToGo: Polling FW ready OK! (276, 16ms), REG_MCUFWDL:0x000505c6
- [ 102.111291] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 102.111295] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 92ms
- [ 102.111326] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 102.111331] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 102.111333] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 102.602347] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 102.602409] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 102.602668] RTL871X: kfree gain_offset 0x55:0x82060
- [ 102.603282] RTL871X: after :0x86070
- [ 102.603417] RTL871X: <=== rtw_ips_pwr_up.............. in 588ms
- [ 102.603420] RTL871X: nolinked power save leave
- [ 102.603467] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 104.200325] RTL871X: survey done event(5) band:0 for wlan0
- [ 104.200359] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 104.205217] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 104.205225] RTL871X: ==>ips_enter cnts:3
- [ 104.205227] RTL871X: nolinked power save enter
- [ 104.205229] RTL871X: ===> rtw_ips_pwr_down...................
- [ 104.205231] RTL871X: ====> rtw_ips_dev_unload...
- [ 104.213992] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 104.213999] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 104.214324] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 104.214328] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 133.506854] usb 1-1: new full-speed USB device number 3 using xhci-hcd
- [ 133.657587] usb 1-1: New USB device found, idVendor=0318, idProduct=2808, bcdDevice= 2.00
- [ 133.657606] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 133.657618] usb 1-1: Product: 2.4G Composite Devic
- [ 133.683859] input: 2.4G Composite Devic as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:0318:2808.0001/input/input1
- [ 133.744435] hid-generic 0003:0318:2808.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-xhci-hcd.0.auto-1/input0
- [ 133.752622] input: 2.4G Composite Devic Mouse as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:0318:2808.0002/input/input2
- [ 133.753583] input: 2.4G Composite Devic Consumer Control as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:0318:2808.0002/input/input3
- [ 133.811572] input: 2.4G Composite Devic System Control as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.1/0003:0318:2808.0002/input/input4
- [ 133.812167] hid-generic 0003:0318:2808.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-xhci-hcd.0.auto-1/input1
- [ 135.012351] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 135.012364] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 135.012369] RTL871X: ==>ips_leave cnts:3
- [ 135.012371] RTL871X: ===> rtw_ips_pwr_up..............
- [ 135.012382] RTL871X: ===> ips_netdrv_open.........
- [ 135.012519] RTL871X: FW does not exist before power on!!
- [ 135.012896] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 135.014332] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 135.014336] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 135.014477] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 135.014479] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 135.014518] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 135.014520] RTL871X: Power on ok!
- [ 135.014618] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 135.014623] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 135.014627] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 135.014629] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 135.014631] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 135.091835] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 135.092035] RTL871X: _8051Reset8188: Finish
- [ 135.105534] RTL871X: _FWFreeToGo: Polling FW ready OK! (290, 12ms), REG_MCUFWDL:0x000505c6
- [ 135.105538] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 135.105542] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 92ms
- [ 135.105560] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 135.105563] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 135.105565] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 135.593870] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 135.593928] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 135.594165] RTL871X: kfree gain_offset 0x55:0x82060
- [ 135.594648] RTL871X: after :0x86070
- [ 135.594766] RTL871X: <=== rtw_ips_pwr_up.............. in 580ms
- [ 135.594769] RTL871X: nolinked power save leave
- [ 135.594849] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 137.189927] RTL871X: survey done event(11) band:0 for wlan0
- [ 137.189992] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 137.196016] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 137.196029] RTL871X: ==>ips_enter cnts:4
- [ 137.196034] RTL871X: nolinked power save enter
- [ 137.196039] RTL871X: ===> rtw_ips_pwr_down...................
- [ 137.196045] RTL871X: ====> rtw_ips_dev_unload...
- [ 137.206572] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 137.206585] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 137.207640] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 137.207657] RTL871X: <=== rtw_ips_pwr_down..................... in 12ms
- [ 178.047466] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 178.047489] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 178.047499] RTL871X: ==>ips_leave cnts:4
- [ 178.047504] RTL871X: ===> rtw_ips_pwr_up..............
- [ 178.047525] RTL871X: ===> ips_netdrv_open.........
- [ 178.047783] RTL871X: FW does not exist before power on!!
- [ 178.048492] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 178.050385] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 178.050399] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 178.050691] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 178.050697] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 178.050781] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 178.050786] RTL871X: Power on ok!
- [ 178.051180] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 178.051192] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 178.051205] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 178.051210] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 178.051215] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 178.180608] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 178.180818] RTL871X: _8051Reset8188: Finish
- [ 178.194348] RTL871X: _FWFreeToGo: Polling FW ready OK! (245, 12ms), REG_MCUFWDL:0x000505c6
- [ 178.194354] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 178.194358] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 140ms
- [ 178.194376] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 178.194380] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 178.194382] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 178.685834] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 178.685891] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 178.686130] RTL871X: kfree gain_offset 0x55:0x82060
- [ 178.686613] RTL871X: after :0x86070
- [ 178.686733] RTL871X: <=== rtw_ips_pwr_up.............. in 636ms
- [ 178.686735] RTL871X: nolinked power save leave
- [ 178.686781] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 180.286034] RTL871X: survey done event(9) band:0 for wlan0
- [ 180.286109] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 180.292068] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 180.292082] RTL871X: ==>ips_enter cnts:5
- [ 180.292087] RTL871X: nolinked power save enter
- [ 180.292092] RTL871X: ===> rtw_ips_pwr_down...................
- [ 180.292098] RTL871X: ====> rtw_ips_dev_unload...
- [ 180.304532] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 180.304547] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 180.305184] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 180.305194] RTL871X: <=== rtw_ips_pwr_down..................... in 12ms
- [ 231.018082] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 231.018095] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 231.018100] RTL871X: ==>ips_leave cnts:5
- [ 231.018102] RTL871X: ===> rtw_ips_pwr_up..............
- [ 231.018113] RTL871X: ===> ips_netdrv_open.........
- [ 231.018257] RTL871X: FW does not exist before power on!!
- [ 231.018638] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 231.020090] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 231.020095] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 231.020237] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 231.020240] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 231.020279] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 231.020281] RTL871X: Power on ok!
- [ 231.020379] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 231.020384] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 231.020389] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 231.020391] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 231.020392] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 231.101564] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 231.101776] RTL871X: _8051Reset8188: Finish
- [ 231.115279] RTL871X: _FWFreeToGo: Polling FW ready OK! (257, 12ms), REG_MCUFWDL:0x000505c6
- [ 231.115285] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 231.115288] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 96ms
- [ 231.115307] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 231.115310] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 231.115313] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 231.602757] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 231.602812] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 231.603040] RTL871X: kfree gain_offset 0x55:0x82060
- [ 231.603501] RTL871X: after :0x86070
- [ 231.603616] RTL871X: <=== rtw_ips_pwr_up.............. in 584ms
- [ 231.603618] RTL871X: nolinked power save leave
- [ 231.603661] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 233.198293] RTL871X: survey done event(f) band:0 for wlan0
- [ 233.198330] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 233.203227] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 233.203234] RTL871X: ==>ips_enter cnts:6
- [ 233.203236] RTL871X: nolinked power save enter
- [ 233.203238] RTL871X: ===> rtw_ips_pwr_down...................
- [ 233.203240] RTL871X: ====> rtw_ips_dev_unload...
- [ 233.211816] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 233.211823] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 233.212125] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 233.212130] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 259.030633] hdmi-audio-codec hdmi-audio-codec.2.auto: Not able to map channels to speakers (-22)
- [ 259.030643] hdmi-audio-codec hdmi-audio-codec.2.auto: ASoC: can't set i2s-hifi hw params: -22
- [ 259.030651] gx-sound-card sound: ASoC: PRE_PMU: be.dai-link-2-playback event failed: -22
- [ 261.638628] fuse: init (API version 7.31)
- [ 267.492131] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 267.492145] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 267.492151] RTL871X: ==>ips_leave cnts:6
- [ 267.492153] RTL871X: ===> rtw_ips_pwr_up..............
- [ 267.492163] RTL871X: ===> ips_netdrv_open.........
- [ 267.492343] RTL871X: FW does not exist before power on!!
- [ 267.494034] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 267.495974] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 267.495981] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 267.496187] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 267.496192] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 267.496264] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 267.496268] RTL871X: Power on ok!
- [ 267.496414] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 267.496422] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 267.496427] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 267.496429] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 267.496431] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 267.582482] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 267.582759] RTL871X: _8051Reset8188: Finish
- [ 267.596256] RTL871X: _FWFreeToGo: Polling FW ready OK! (248, 12ms), REG_MCUFWDL:0x000505c6
- [ 267.596262] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 267.596266] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 100ms
- [ 267.596290] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 267.596293] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 267.596295] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 268.100697] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 268.100759] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 268.101047] RTL871X: kfree gain_offset 0x55:0x82060
- [ 268.101576] RTL871X: after :0x86070
- [ 268.101726] RTL871X: <=== rtw_ips_pwr_up.............. in 612ms
- [ 268.101730] RTL871X: nolinked power save leave
- [ 268.101790] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 269.695633] RTL871X: survey done event(d) band:0 for wlan0
- [ 269.695686] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 269.699278] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 269.699286] RTL871X: ==>ips_enter cnts:7
- [ 269.699288] RTL871X: nolinked power save enter
- [ 269.699290] RTL871X: ===> rtw_ips_pwr_down...................
- [ 269.699292] RTL871X: ====> rtw_ips_dev_unload...
- [ 269.709288] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 269.709296] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 269.709759] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 269.709768] RTL871X: <=== rtw_ips_pwr_down..................... in 12ms
- [ 331.016168] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 331.016181] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 331.016186] RTL871X: ==>ips_leave cnts:7
- [ 331.016188] RTL871X: ===> rtw_ips_pwr_up..............
- [ 331.016198] RTL871X: ===> ips_netdrv_open.........
- [ 331.016349] RTL871X: FW does not exist before power on!!
- [ 331.016744] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 331.018167] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 331.018170] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 331.018310] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 331.018313] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 331.018351] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 331.018353] RTL871X: Power on ok!
- [ 331.018451] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 331.018457] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 331.018461] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 331.018463] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 331.018465] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 331.092055] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 331.092253] RTL871X: _8051Reset8188: Finish
- [ 331.105771] RTL871X: _FWFreeToGo: Polling FW ready OK! (290, 12ms), REG_MCUFWDL:0x000505c6
- [ 331.105778] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 331.105781] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 88ms
- [ 331.105800] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 331.105804] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 331.105806] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 331.591687] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 331.591745] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 331.591982] RTL871X: kfree gain_offset 0x55:0x82060
- [ 331.592471] RTL871X: after :0x86070
- [ 331.592592] RTL871X: <=== rtw_ips_pwr_up.............. in 576ms
- [ 331.592594] RTL871X: nolinked power save leave
- [ 331.592638] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 333.185775] RTL871X: survey done event(8) band:0 for wlan0
- [ 333.185853] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 333.191617] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 333.191632] RTL871X: ==>ips_enter cnts:8
- [ 333.191637] RTL871X: nolinked power save enter
- [ 333.191642] RTL871X: ===> rtw_ips_pwr_down...................
- [ 333.191647] RTL871X: ====> rtw_ips_dev_unload...
- [ 333.205416] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 333.205430] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 333.207159] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 333.207177] RTL871X: <=== rtw_ips_pwr_down..................... in 16ms
- [ 394.016711] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 394.016724] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 394.016729] RTL871X: ==>ips_leave cnts:8
- [ 394.016731] RTL871X: ===> rtw_ips_pwr_up..............
- [ 394.016741] RTL871X: ===> ips_netdrv_open.........
- [ 394.016882] RTL871X: FW does not exist before power on!!
- [ 394.017306] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 394.018803] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 394.018808] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 394.018964] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 394.018967] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 394.019009] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 394.019011] RTL871X: Power on ok!
- [ 394.019196] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 394.019202] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 394.019207] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 394.019209] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 394.019211] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 394.095938] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 394.096145] RTL871X: _8051Reset8188: Finish
- [ 394.109671] RTL871X: _FWFreeToGo: Polling FW ready OK! (289, 12ms), REG_MCUFWDL:0x000505c6
- [ 394.109677] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 394.109680] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 88ms
- [ 394.109702] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 394.109705] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 394.109708] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 394.598163] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 394.598222] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 394.598460] RTL871X: kfree gain_offset 0x55:0x82060
- [ 394.598941] RTL871X: after :0x86070
- [ 394.599113] RTL871X: <=== rtw_ips_pwr_up.............. in 584ms
- [ 394.599120] RTL871X: nolinked power save leave
- [ 394.599459] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 396.200693] RTL871X: survey done event(10) band:0 for wlan0
- [ 396.200745] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 396.207740] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 396.207747] RTL871X: ==>ips_enter cnts:9
- [ 396.207749] RTL871X: nolinked power save enter
- [ 396.207751] RTL871X: ===> rtw_ips_pwr_down...................
- [ 396.207753] RTL871X: ====> rtw_ips_dev_unload...
- [ 396.217354] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 396.217362] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 396.217677] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 396.217681] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 457.073775] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 457.073787] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 457.073792] RTL871X: ==>ips_leave cnts:9
- [ 457.073794] RTL871X: ===> rtw_ips_pwr_up..............
- [ 457.073805] RTL871X: ===> ips_netdrv_open.........
- [ 457.073961] RTL871X: FW does not exist before power on!!
- [ 457.074378] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 457.075846] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 457.075852] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 457.076008] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 457.076013] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 457.076054] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 457.076057] RTL871X: Power on ok!
- [ 457.076168] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 457.076172] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 457.076180] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 457.076182] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 457.076184] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 457.163062] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 457.163272] RTL871X: _8051Reset8188: Finish
- [ 457.176819] RTL871X: _FWFreeToGo: Polling FW ready OK! (235, 16ms), REG_MCUFWDL:0x000505c6
- [ 457.176825] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 457.176829] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 100ms
- [ 457.176846] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 457.176849] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 457.176851] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 457.667161] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 457.667220] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 457.667468] RTL871X: kfree gain_offset 0x55:0x82060
- [ 457.668043] RTL871X: after :0x86070
- [ 457.668176] RTL871X: <=== rtw_ips_pwr_up.............. in 596ms
- [ 457.668178] RTL871X: nolinked power save leave
- [ 457.668224] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 459.260841] RTL871X: survey done event(9) band:0 for wlan0
- [ 459.260882] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 459.265823] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 459.265831] RTL871X: ==>ips_enter cnts:10
- [ 459.265833] RTL871X: nolinked power save enter
- [ 459.265835] RTL871X: ===> rtw_ips_pwr_down...................
- [ 459.265837] RTL871X: ====> rtw_ips_dev_unload...
- [ 459.274517] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 459.274525] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 459.274845] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 459.274849] RTL871X: <=== rtw_ips_pwr_down..................... in 8ms
- [ 520.018105] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 520.018129] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 520.018140] RTL871X: ==>ips_leave cnts:10
- [ 520.018145] RTL871X: ===> rtw_ips_pwr_up..............
- [ 520.018165] RTL871X: ===> ips_netdrv_open.........
- [ 520.018403] RTL871X: FW does not exist before power on!!
- [ 520.019209] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 520.021143] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 520.021150] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 520.021478] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 520.021486] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 520.021577] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 520.021582] RTL871X: Power on ok!
- [ 520.021815] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 520.021826] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 520.021838] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 520.021844] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 520.021849] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 520.191781] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 520.192253] RTL871X: _8051Reset8188: Finish
- [ 520.205789] RTL871X: _FWFreeToGo: Polling FW ready OK! (140, 12ms), REG_MCUFWDL:0x000505c6
- [ 520.205801] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 520.205810] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 184ms
- [ 520.205852] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 520.205860] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 520.205865] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 520.705348] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 520.705407] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 520.705645] RTL871X: kfree gain_offset 0x55:0x82060
- [ 520.706197] RTL871X: after :0x86070
- [ 520.706341] RTL871X: <=== rtw_ips_pwr_up.............. in 688ms
- [ 520.706345] RTL871X: nolinked power save leave
- [ 520.706394] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 522.301360] RTL871X: survey done event(9) band:0 for wlan0
- [ 522.301436] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 522.318221] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 522.318237] RTL871X: ==>ips_enter cnts:11
- [ 522.318242] RTL871X: nolinked power save enter
- [ 522.318247] RTL871X: ===> rtw_ips_pwr_down...................
- [ 522.318252] RTL871X: ====> rtw_ips_dev_unload...
- [ 522.329408] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 522.329422] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 522.330203] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 522.330218] RTL871X: <=== rtw_ips_pwr_down..................... in 12ms
- [ 583.023072] RTL871X: cfg80211_rtw_scan(wlan0)
- [ 583.023094] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 583.023106] RTL871X: ==>ips_leave cnts:11
- [ 583.023112] RTL871X: ===> rtw_ips_pwr_up..............
- [ 583.023132] RTL871X: ===> ips_netdrv_open.........
- [ 583.023405] RTL871X: FW does not exist before power on!!
- [ 583.024279] RTL871X: SetHwReg8188F: hci_sus_state=1
- [ 583.026183] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
- [ 583.026192] RTL871X: SetHwReg8188F: hci_sus_state=2
- [ 583.026499] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
- [ 583.026506] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
- [ 583.026591] RTL871X: PowerOnCheck: 0x1B8 test Pass.
- [ 583.026597] RTL871X: Power on ok!
- [ 583.026811] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
- [ 583.026821] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
- [ 583.026833] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
- [ 583.026838] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
- [ 583.026843] RTL871X: rtl8188f_FirmwareDownload by IO write!
- [ 583.199099] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050505
- [ 583.199515] RTL871X: _8051Reset8188: Finish
- [ 583.213124] RTL871X: _FWFreeToGo: Polling FW ready OK! (134, 16ms), REG_MCUFWDL:0x000505c6
- [ 583.213136] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
- [ 583.213144] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 188ms
- [ 583.213180] RTL871X: <=== rtl8188f_FirmwareDownload()
- [ 583.213188] RTL871X: HalDetectPwrDownMode(): PDN=0
- [ 583.213193] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
- [ 583.708785] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
- [ 583.708840] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:1
- [ 583.709073] RTL871X: kfree gain_offset 0x55:0x82060
- [ 583.709547] RTL871X: after :0x86070
- [ 583.709659] RTL871X: <=== rtw_ips_pwr_up.............. in 688ms
- [ 583.709662] RTL871X: nolinked power save leave
- [ 583.709705] RTL871X: ==> ips_leave.....LED(0x01028282)...
- [ 585.302742] RTL871X: survey done event(b) band:0 for wlan0
- [ 585.302805] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 585.310636] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 585.310652] RTL871X: ==>ips_enter cnts:12
- [ 585.310657] RTL871X: nolinked power save enter
- [ 585.310662] RTL871X: ===> rtw_ips_pwr_down...................
- [ 585.310668] RTL871X: ====> rtw_ips_dev_unload...
- [ 585.323245] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
- [ 585.323260] RTL871X: SetHwReg8188F: hci_sus_state=3
- [ 585.325376] RTL871X: SetHwReg8188F: hci_sus_state=0
- [ 585.325393] RTL871X: <=== rtw_ips_pwr_down..................... in 16ms
Add Comment
Please, Sign In to add comment