API tools faq
paste
steve555

dmesg-02

steve555
Aug 6th, 2011
284
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 68.46 KB | None | 0 0
raw download clone embed print report
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 3.0.0+ (steve@mernivia) (gcc version 4.6.0 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 SMP Fri Aug 5 19:05:58 BST 2011
  4. [    0.000000] BIOS-provided physical RAM map:
  5. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  6. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  7. [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
  8. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
  9. [    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
  10. [    0.000000]  BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
  11. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
  14. [    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
  15. [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  16. [    0.000000] DMI 2.3 present.
  17. [    0.000000] DMI: American Megatrends Inc. Uknown/K7S8XE, BIOS P2.20 10/28/2004
  18. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  19. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  20. [    0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
  21. [    0.000000] MTRR default type: uncachable
  22. [    0.000000] MTRR fixed ranges enabled:
  23. [    0.000000]   00000-9FFFF write-back
  24. [    0.000000]   A0000-BFFFF uncachable
  25. [    0.000000]   C0000-DFFFF write-protect
  26. [    0.000000]   E0000-EFFFF uncachable
  27. [    0.000000]   F0000-FFFFF write-protect
  28. [    0.000000] MTRR variable ranges enabled:
  29. [    0.000000]   0 base 000000000 mask F80000000 write-back
  30. [    0.000000]   1 disabled
  31. [    0.000000]   2 disabled
  32. [    0.000000]   3 disabled
  33. [    0.000000]   4 disabled
  34. [    0.000000]   5 disabled
  35. [    0.000000]   6 disabled
  36. [    0.000000]   7 base 0D0000000 mask FF0000000 write-combining
  37. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  38. [    0.000000] initial memory mapped : 0 - 02000000
  39. [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  40. [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  41. [    0.000000]  0000000000 - 0000400000 page 4k
  42. [    0.000000]  0000400000 - 0037400000 page 2M
  43. [    0.000000]  0037400000 - 00377fe000 page 4k
  44. [    0.000000] kernel direct mapping tables up to 377fe000 @ 1ffb000-2000000
  45. [    0.000000] RAMDISK: 378c5000 - 37ff0000
  46. [    0.000000] Allocated new RAMDISK: 370d3000 - 377fdd6d
  47. [    0.000000] Move RAMDISK from 00000000378c5000 - 0000000037fefd6c to 370d3000 - 377fdd6c
  48. [    0.000000] ACPI: RSDP 000fab70 00014 (v00 AMI   )
  49. [    0.000000] ACPI: RSDT 7fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
  50. [    0.000000] ACPI: FACP 7fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
  51. [    0.000000] ACPI: DSDT 7fff0120 032EA (v01    SiS      748 00000100 INTL 02002024)
  52. [    0.000000] ACPI: FACS 7fff8000 00040
  53. [    0.000000] ACPI: APIC 7fff00c0 0005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
  54. [    0.000000] ACPI: Local APIC address 0xfee00000
  55. [    0.000000] 1159MB HIGHMEM available.
  56. [    0.000000] 887MB LOWMEM available.
  57. [    0.000000]   mapped low ram: 0 - 377fe000
  58. [    0.000000]   low ram: 0 - 377fe000
  59. [    0.000000] Zone PFN ranges:
  60. [    0.000000]   DMA      0x00000010 -> 0x00001000
  61. [    0.000000]   Normal   0x00001000 -> 0x000377fe
  62. [    0.000000]   HighMem  0x000377fe -> 0x0007fff0
  63. [    0.000000] Movable zone start PFN for each node
  64. [    0.000000] early_node_map[2] active PFN ranges
  65. [    0.000000]     0: 0x00000010 -> 0x0000009f
  66. [    0.000000]     0: 0x00000100 -> 0x0007fff0
  67. [    0.000000] On node 0 totalpages: 524159
  68. [    0.000000] free_area_init_node: node 0, pgdat c1b90580, node_mem_map f60d2200
  69. [    0.000000]   DMA zone: 32 pages used for memmap
  70. [    0.000000]   DMA zone: 0 pages reserved
  71. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  72. [    0.000000]   Normal zone: 1744 pages used for memmap
  73. [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
  74. [    0.000000]   HighMem zone: 2320 pages used for memmap
  75. [    0.000000]   HighMem zone: 294626 pages, LIFO batch:31
  76. [    0.000000] Using APIC driver default
  77. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  78. [    0.000000] ACPI: Local APIC address 0xfee00000
  79. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  80. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  81. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  82. [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  83. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  84. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  85. [    0.000000] ACPI: IRQ0 used by override.
  86. [    0.000000] ACPI: IRQ2 used by override.
  87. [    0.000000] ACPI: IRQ9 used by override.
  88. [    0.000000] Using ACPI (MADT) for SMP configuration information
  89. [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
  90. [    0.000000] nr_irqs_gsi: 40
  91. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  92. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
  93. [    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
  94. [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
  95. [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
  96. [    0.000000] PERCPU: Embedded 12 pages/cpu @f5c00000 s24704 r0 d24448 u4194304
  97. [    0.000000] pcpu-alloc: s24704 r0 d24448 u4194304 alloc=1*4194304
  98. [    0.000000] pcpu-alloc: [0] 0
  99. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520063
  100. [    0.000000] Kernel command line: ro root=UUID=f0ff8775-6706-41a6-a3fa-fae42412f0ec rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=uk rhgb quiet
  101. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  102. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  103. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  104. [    0.000000] Initializing CPU#0
  105. [    0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
  106. [    0.000000] Memory: 2058892k/2097088k available (8621k kernel code, 37744k reserved, 3273k data, 448k init, 1187784k highmem)
  107. [    0.000000] virtual kernel memory layout:
  108. [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
  109. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  110. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  111. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  112. [    0.000000]       .init : 0xc1b9e000 - 0xc1c0e000   ( 448 kB)
  113. [    0.000000]       .data : 0xc186b653 - 0xc1b9de00   (3273 kB)
  114. [    0.000000]       .text : 0xc1000000 - 0xc186b653   (8621 kB)
  115. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  116. [    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  117. [    0.000000] Hierarchical RCU implementation.
  118. [    0.000000] NR_IRQS:2304 nr_irqs:256 16
  119. [    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
  120. [    0.000000] Console: colour VGA+ 80x25
  121. [    0.000000] console [tty0] enabled
  122. [    0.000000] Fast TSC calibration using PIT
  123. [    0.000000] Detected 1833.126 MHz processor.
  124. [    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.25 BogoMIPS (lpj=1833126)
  125. [    0.001012] pid_max: default: 32768 minimum: 301
  126. [    0.001053] Security Framework initialized
  127. [    0.001062] SELinux:  Initializing.
  128. [    0.001078] SELinux:  Starting in permissive mode
  129. [    0.001099] Mount-cache hash table entries: 512
  130. [    0.001341] Initializing cgroup subsys cpuacct
  131. [    0.001350] Initializing cgroup subsys freezer
  132. [    0.001392] mce: CPU supports 4 MCE banks
  133. [    0.001501] SMP alternatives: switching to UP code
  134. [    0.006955] Freeing SMP alternatives: 28k freed
  135. [    0.006971] ACPI: Core revision 20110413
  136. [    0.009131] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  137. [    0.009395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  138. [    0.019541] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
  139. [    0.019998] Performance Events: AMD PMU driver.
  140. [    0.019998] ... version:                0
  141. [    0.019998] ... bit width:              48
  142. [    0.019998] ... generic registers:      4
  143. [    0.019998] ... value mask:             0000ffffffffffff
  144. [    0.019998] ... max period:             00007fffffffffff
  145. [    0.019998] ... fixed-purpose events:   0
  146. [    0.019998] ... event mask:             000000000000000f
  147. [    0.019998] Brought up 1 CPUs
  148. [    0.019998] Total of 1 processors activated (3666.25 BogoMIPS).
  149. [    0.020246] kworker/u:0 used greatest stack depth: 7216 bytes left
  150. [    0.020506] PM: Registering ACPI NVS region at 7fff8000 (32768 bytes)
  151. [    0.020642] Time: 14:05:09  Date: 08/06/11
  152. [    0.020705] NET: Registered protocol family 16
  153. [    0.021440] i2c-core: driver [dummy] registered
  154. [    0.021469] ACPI: bus type pci registered
  155. [    0.022884] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
  156. [    0.022887] PCI: Using configuration type 1 for base access
  157. [    0.024161] kworker/u:0 used greatest stack depth: 7088 bytes left
  158. [    0.047984] bio: create slab <bio-0> at 0
  159. [    0.048711] ACPI: EC: Look up EC in DSDT
  160. [    0.052289] ACPI: Interpreter enabled
  161. [    0.052297] ACPI: (supports S0 S1 S4 S5)
  162. [    0.052321] ACPI: Using IOAPIC for interrupt routing
  163. [    0.054436] ACPI: Power Resource [URP1] (off)
  164. [    0.055338] ACPI: Power Resource [URP2] (off)
  165. [    0.055441] ACPI: Power Resource [FDDP] (off)
  166. [    0.055547] ACPI: Power Resource [LPTP] (off)
  167. [    0.058762] ACPI: No dock devices found.
  168. [    0.058769] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  169. [    0.059161] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  170. [    0.059374] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
  171. [    0.059378] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
  172. [    0.059382] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  173. [    0.059386] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
  174. [    0.059390] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
  175. [    0.059394] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
  176. [    0.059415] pci 0000:00:00.0: [1039:0746] type 0 class 0x000600
  177. [    0.059428] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff]
  178. [    0.059491] pci 0000:00:01.0: [1039:0002] type 1 class 0x000604
  179. [    0.059534] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
  180. [    0.059601] pci 0000:00:02.0: Enabling SiS 96x SMBus
  181. [    0.059619] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
  182. [    0.059665] pci 0000:00:02.1: reg 20: [io  0x0c00-0x0c1f]
  183. [    0.059702] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
  184. [    0.059754] pci 0000:00:02.5: reg 20: [io  0xff00-0xff0f]
  185. [    0.059790] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
  186. [    0.059805] pci 0000:00:03.0: reg 10: [mem 0xcfffd000-0xcfffdfff]
  187. [    0.059869] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
  188. [    0.059883] pci 0000:00:03.1: reg 10: [mem 0xcfffe000-0xcfffefff]
  189. [    0.059949] pci 0000:00:03.2: [1039:7002] type 0 class 0x000c03
  190. [    0.059966] pci 0000:00:03.2: reg 10: [mem 0xcffff000-0xcfffffff]
  191. [    0.060055] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
  192. [    0.060061] pci 0000:00:03.2: PME# disabled
  193. [    0.060096] pci 0000:00:0c.0: [1102:0004] type 0 class 0x000401
  194. [    0.060114] pci 0000:00:0c.0: reg 10: [io  0xd800-0xd83f]
  195. [    0.060178] pci 0000:00:0c.0: supports D1 D2
  196. [    0.060196] pci 0000:00:0c.1: [1102:7003] type 0 class 0x000980
  197. [    0.060213] pci 0000:00:0c.1: reg 10: [io  0xdc00-0xdc07]
  198. [    0.060277] pci 0000:00:0c.1: supports D1 D2
  199. [    0.060295] pci 0000:00:0c.2: [1102:4001] type 0 class 0x000c00
  200. [    0.060314] pci 0000:00:0c.2: reg 10: [mem 0xcfffc800-0xcfffcfff]
  201. [    0.060325] pci 0000:00:0c.2: reg 14: [mem 0xcfff8000-0xcfffbfff]
  202. [    0.060385] pci 0000:00:0c.2: supports D1 D2
  203. [    0.060388] pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot
  204. [    0.060393] pci 0000:00:0c.2: PME# disabled
  205. [    0.060418] pci 0000:00:0e.0: [10ec:8139] type 0 class 0x000200
  206. [    0.060436] pci 0000:00:0e.0: reg 10: [io  0xd400-0xd4ff]
  207. [    0.060447] pci 0000:00:0e.0: reg 14: [mem 0xcfffc700-0xcfffc7ff]
  208. [    0.060490] pci 0000:00:0e.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
  209. [    0.060510] pci 0000:00:0e.0: supports D1 D2
  210. [    0.060562] pci 0000:01:00.0: [10de:0045] type 0 class 0x000300
  211. [    0.060578] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
  212. [    0.060588] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff pref]
  213. [    0.060597] pci 0000:01:00.0: reg 18: [mem 0xcd000000-0xcdffffff]
  214. [    0.060624] pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref]
  215. [    0.060678] pci 0000:00:01.0: PCI bridge to [bus 01-02]
  216. [    0.060684] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
  217. [    0.060690] pci 0000:00:01.0:   bridge window [mem 0xcbd00000-0xcfefffff]
  218. [    0.060695] pci 0000:00:01.0:   bridge window [mem 0xaba00000-0xcbbfffff pref]
  219. [    0.060705] pci_bus 0000:00: on NUMA node 0
  220. [    0.060710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  221. [    0.060999]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
  222. [    0.069577] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  223. [    0.069656] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  224. [    0.069729] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  225. [    0.069800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  226. [    0.069872] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
  227. [    0.069946] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  228. [    0.070035] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  229. [    0.070108] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  230. [    0.070434] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  231. [    0.070437] vgaarb: loaded
  232. [    0.070439] vgaarb: bridge control possible 0000:01:00.0
  233. [    0.070529] i2c-core: driver [wm831x] registered
  234. [    0.070598] i2c-core: driver [wm8350] registered
  235. [    0.070914] SCSI subsystem initialized
  236. [    0.071187] libata version 3.00 loaded.
  237. [    0.071637] usbcore: registered new interface driver usbfs
  238. [    0.071720] usbcore: registered new interface driver hub
  239. [    0.071830] usbcore: registered new device driver usb
  240. [    0.072459] wmi: Mapper loaded
  241. [    0.072543] Advanced Linux Sound Architecture Driver Version 1.0.24.
  242. [    0.072616] PCI: Using ACPI for IRQ routing
  243. [    0.072651] PCI: pci_cache_line_size set to 32 bytes
  244. [    0.072708] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  245. [    0.072712] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
  246. [    0.073425] cfg80211: Calling CRDA to update world regulatory domain
  247. [    0.073689] NetLabel: Initializing
  248. [    0.073692] NetLabel:  domain hash size = 128
  249. [    0.073694] NetLabel:  protocols = UNLABELED CIPSOv4
  250. [    0.073714] NetLabel:  unlabeled traffic allowed by default
  251. [    0.078367] pnp: PnP ACPI init
  252. [    0.078398] ACPI: bus type pnp registered
  253. [    0.078581] pnp 00:00: [bus 00-ff]
  254. [    0.078587] pnp 00:00: [io  0x0cf8-0x0cff]
  255. [    0.078591] pnp 00:00: [io  0x0000-0x0cf7 window]
  256. [    0.078595] pnp 00:00: [io  0x0d00-0xffff window]
  257. [    0.078599] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  258. [    0.078602] pnp 00:00: [mem 0x000cb000-0x000dffff window]
  259. [    0.078606] pnp 00:00: [mem 0x80000000-0xffdfffff window]
  260. [    0.078610] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
  261. [    0.078750] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  262. [    0.078815] pnp 00:01: [io  0x0010-0x001f]
  263. [    0.078819] pnp 00:01: [io  0x0022-0x003f]
  264. [    0.078822] pnp 00:01: [io  0x0044-0x005f]
  265. [    0.078825] pnp 00:01: [io  0x0062-0x0063]
  266. [    0.078828] pnp 00:01: [io  0x0065-0x006f]
  267. [    0.078831] pnp 00:01: [io  0x0072-0x007f]
  268. [    0.078834] pnp 00:01: [io  0x0080]
  269. [    0.078837] pnp 00:01: [io  0x0084-0x0086]
  270. [    0.078840] pnp 00:01: [io  0x0088]
  271. [    0.078843] pnp 00:01: [io  0x008c-0x008e]
  272. [    0.078845] pnp 00:01: [io  0x0090-0x009f]
  273. [    0.078848] pnp 00:01: [io  0x00a2-0x00bf]
  274. [    0.078851] pnp 00:01: [io  0x00e0-0x00ef]
  275. [    0.078861] pnp 00:01: [io  0x04d0-0x04d1]
  276. [    0.078864] pnp 00:01: [io  0x0295-0x0296]
  277. [    0.078867] pnp 00:01: [io  0x0800-0x087f]
  278. [    0.078869] pnp 00:01: [io  0x0880-0x08ff]
  279. [    0.078872] pnp 00:01: [io  0x0c00-0x0c1f]
  280. [    0.078876] pnp 00:01: [mem 0xfee00000-0xfee00fff]
  281. [    0.079021] system 00:01: [io  0x04d0-0x04d1] has been reserved
  282. [    0.079026] system 00:01: [io  0x0295-0x0296] has been reserved
  283. [    0.079030] system 00:01: [io  0x0800-0x087f] has been reserved
  284. [    0.079033] system 00:01: [io  0x0880-0x08ff] has been reserved
  285. [    0.079037] system 00:01: [io  0x0c00-0x0c1f] has been reserved
  286. [    0.079042] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
  287. [    0.079048] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  288. [    0.079071] pnp 00:02: [dma 4]
  289. [    0.079074] pnp 00:02: [io  0x0000-0x000f]
  290. [    0.079077] pnp 00:02: [io  0x0081-0x0083]
  291. [    0.079080] pnp 00:02: [io  0x0087]
  292. [    0.079083] pnp 00:02: [io  0x0089-0x008b]
  293. [    0.079086] pnp 00:02: [io  0x008f]
  294. [    0.079088] pnp 00:02: [io  0x00c0-0x00df]
  295. [    0.079092] pnp 00:02: [io  0x0481-0x0483]
  296. [    0.079094] pnp 00:02: [io  0x0487]
  297. [    0.079097] pnp 00:02: [io  0x0489-0x048b]
  298. [    0.079100] pnp 00:02: [io  0x048f]
  299. [    0.079196] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  300. [    0.079215] pnp 00:03: [io  0x0070-0x0071]
  301. [    0.079236] pnp 00:03: [irq 8]
  302. [    0.079325] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  303. [    0.079341] pnp 00:04: [io  0x0061]
  304. [    0.079430] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  305. [    0.079446] pnp 00:05: [io  0x00f0-0x00ff]
  306. [    0.079454] pnp 00:05: [irq 13]
  307. [    0.079554] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  308. [    0.079684] pnp 00:06: [io  0x03f2-0x03f3]
  309. [    0.079688] pnp 00:06: [io  0x03f4-0x03f5]
  310. [    0.079691] pnp 00:06: [io  0x03f7]
  311. [    0.079698] pnp 00:06: [irq 6]
  312. [    0.079701] pnp 00:06: [dma 2]
  313. [    0.079823] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
  314. [    0.080070] pnp 00:07: [io  0x03f8-0x03ff]
  315. [    0.080078] pnp 00:07: [irq 4]
  316. [    0.080213] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
  317. [    0.080611] pnp 00:08: [io  0x0378-0x037f]
  318. [    0.080615] pnp 00:08: [io  0x0778-0x077b]
  319. [    0.080621] pnp 00:08: [irq 7]
  320. [    0.080624] pnp 00:08: [dma 0]
  321. [    0.080794] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
  322. [    0.080976] pnp 00:09: [io  0x0200-0x0207]
  323. [    0.081091] pnp 00:09: Plug and Play ACPI device, IDs PNPb02f (active)
  324. [    0.081310] pnp: PnP ACPI: found 10 devices
  325. [    0.081313] ACPI: ACPI bus type pnp unregistered
  326. [    0.122318] Switching to clocksource acpi_pm
  327. [    0.122359] pci 0000:00:0e.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xfffc0000-0xffffffff]
  328. [    0.122367] PCI: max bus depth: 1 pci_try_num: 2
  329. [    0.122391] pci 0000:00:0e.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
  330. [    0.122396] pci 0000:00:01.0: PCI bridge to [bus 01-02]
  331. [    0.122400] pci 0000:00:01.0:   bridge window [io  disabled]
  332. [    0.122408] pci 0000:00:01.0:   bridge window [mem 0xcbd00000-0xcfefffff]
  333. [    0.122414] pci 0000:00:01.0:   bridge window [mem 0xaba00000-0xcbbfffff pref]
  334. [    0.122433] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
  335. [    0.122437] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
  336. [    0.122441] pci_bus 0000:01: resource 1 [mem 0xcbd00000-0xcfefffff]
  337. [    0.122445] pci_bus 0000:01: resource 2 [mem 0xaba00000-0xcbbfffff pref]
  338. [    0.122514] NET: Registered protocol family 2
  339. [    0.122598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  340. [    0.122662] Switched to NOHz mode on CPU #0
  341. [    0.122812] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  342. [    0.124898] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  343. [    0.126049] TCP: Hash tables configured (established 131072 bind 65536)
  344. [    0.126053] TCP reno registered
  345. [    0.126059] UDP hash table entries: 512 (order: 2, 16384 bytes)
  346. [    0.126088] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  347. [    0.126301] NET: Registered protocol family 1
  348. [    0.126492] RPC: Registered named UNIX socket transport module.
  349. [    0.126495] RPC: Registered udp transport module.
  350. [    0.126497] RPC: Registered tcp transport module.
  351. [    0.126499] RPC: Registered tcp NFSv4.1 backchannel transport module.
  352. [    0.181055] pci 0000:01:00.0: Boot video device
  353. [    0.181059] PCI: CLS 32 bytes, default 32
  354. [    0.181167] Trying to unpack rootfs image as initramfs...
  355. [    0.428227] Freeing initrd memory: 7340k freed
  356. [    0.441875] microcode: CPU0: family 6 not supported
  357. [    0.442541] audit: initializing netlink socket (disabled)
  358. [    0.442571] type=2000 audit(1312639509.441:1): initialized
  359. [    0.491303] highmem bounce pool size: 64 pages
  360. [    0.491312] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  361. [    0.498091] VFS: Disk quotas dquot_6.5.2
  362. [    0.498251] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  363. [    0.500750] msgmni has been set to 1715
  364. [    0.500927] SELinux:  Registering netfilter hooks
  365. [    0.501681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  366. [    0.501686] io scheduler noop registered
  367. [    0.501689] io scheduler deadline registered
  368. [    0.501709] io scheduler cfq registered (default)
  369. [    0.502158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  370. [    0.502642] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  371. [    0.502653] ACPI: Power Button [PWRB]
  372. [    0.502785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  373. [    0.502791] ACPI: Power Button [PWRF]
  374. [    0.503074] ACPI: acpi_idle registered with cpuidle
  375. [    0.504927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  376. [    0.769090] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  377. [    0.790175] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  378. [    0.790757] Non-volatile memory driver v1.3
  379. [    0.790802] Linux agpgart interface v0.103
  380. [    0.791085] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
  381. [    0.809959] agpgart-sis 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  382. [    0.810209] [drm] Initialized drm 1.1.0 20060810
  383. [    0.810288] [drm] radeon defaulting to kernel modesetting.
  384. [    0.810291] [drm] radeon kernel modesetting enabled.
  385. [    0.810425] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
  386. [    0.810566] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  387. [    0.812303] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x440500a1)
  388. [    0.814764] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
  389. [    0.862033] [drm] nouveau 0000:01:00.0: ... appears to be valid
  390. [    0.862038] [drm] nouveau 0000:01:00.0: BIT BIOS found
  391. [    0.862043] [drm] nouveau 0000:01:00.0: Bios version 05.40.02.15
  392. [    0.862049] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
  393. [    0.862052] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
  394. [    0.862055] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
  395. [    0.862061] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000310 00000028
  396. [    0.862066] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
  397. [    0.862070] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011302 00000000
  398. [    0.862073] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0000c033
  399. [    0.862078] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 3 2
  400. [    0.862084] [drm] nouveau 0000:01:00.0:   0: 0x00001000: type 0x00 idx 0 tag 0x07
  401. [    0.862088] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
  402. [    0.862092] [drm] nouveau 0000:01:00.0:   2: 0x00000212: type 0x12 idx 2 tag 0xff
  403. [    0.862095] [drm] nouveau 0000:01:00.0: unknown type, using 0xff
  404. [    0.862103] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE754
  405. [    0.862669] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEBFC
  406. [    0.863304] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF26A
  407. [    0.863324] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF3C7
  408. [    0.866463] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF469
  409. [    0.866469] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
  410. [    0.866617] i2c i2c-0: adapter [nouveau-0000:01:00.0-2] registered
  411. [    0.866626] i2c i2c-0: master_xfer[0] W, addr=0x2d, len=1
  412. [    0.866630] i2c i2c-0: master_xfer[1] R, addr=0x2d, len=1
  413. [    0.870319] i2c i2c-0: NAK from device addr 0x2d msg #0
  414. [    0.870427] i2c i2c-0: master_xfer[0] W, addr=0x2d, len=1
  415. [    0.870430] i2c i2c-0: master_xfer[1] R, addr=0x2d, len=1
  416. [    0.874094] i2c i2c-0: NAK from device addr 0x2d msg #0
  417. [    0.874200] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
  418. [    0.874204] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
  419. [    0.877866] i2c i2c-0: NAK from device addr 0x2e msg #0
  420. [    0.877972] i2c i2c-0: master_xfer[0] W, addr=0x2e, len=1
  421. [    0.877975] i2c i2c-0: master_xfer[1] R, addr=0x2e, len=1
  422. [    0.881639] i2c i2c-0: NAK from device addr 0x2e msg #0
  423. [    0.881745] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
  424. [    0.881749] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
  425. [    0.886803] modprobe used greatest stack depth: 6984 bytes left
  426. [    0.886894] i2c 0-004c: uevent
  427. [    0.886987] i2c i2c-0: client [lm99] registered with bus id 0-004c
  428. [    0.887021] i2c 0-004c: uevent
  429. [    0.887092] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
  430. [    0.887100] [drm] nouveau 0000:01:00.0: 0: core 350MHz shader 350MHz memory 1000MHz voltage 1300mV fanspeed 53%
  431. [    0.887115] [drm] nouveau 0000:01:00.0: c: core 199MHz shader 199MHz memory 598MHz voltage 1100mV fanspeed 100%
  432. [    0.887529] [TTM] Zone  kernel: Available graphics memory: 439238 kiB.
  433. [    0.887533] [TTM] Zone highmem: Available graphics memory: 1033130 kiB.
  434. [    0.887536] [TTM] Initializing pool allocator.
  435. [    0.887555] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
  436. [    0.887743] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
  437. [    0.887771] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 4x mode
  438. [    0.887776] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
  439. [    0.898062] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 4x mode
  440. [    0.898068] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture)
  441. [    0.898076] [drm] nouveau 0000:01:00.0: PTIMER: unknown input clock freq
  442. [    0.898233] [drm] nouveau 0000:01:00.0: Saving VGA fonts
  443. [    0.953864] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  444. [    0.953870] [drm] No driver support for vblank timestamp query.
  445. [    0.953880] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  446. [    0.953885] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  447. [    0.953890] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
  448. [    0.953895] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
  449. [    0.974124] i2c i2c-1: adapter [nouveau-0000:01:00.0-1] registered
  450. [    0.974135] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  451. [    0.974139] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  452. [    0.977838] i2c i2c-1: NAK from device addr 0x50 msg #0
  453. [    0.990083] i2c i2c-2: adapter [nouveau-0000:01:00.0-0] registered
  454. [    0.990091] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  455. [    0.990094] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  456. [    0.993395] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  457. [    0.993399] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  458. [    0.996706] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  459. [    0.996710] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  460. [    1.109082] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x49000, bo f592da00
  461. [    1.109206] fbcon: nouveaufb (fb0) is primary device
  462. [    1.120645] [drm] nouveau 0000:01:00.0: 0xCD0D: Parsing digital output script table
  463. [    1.170669] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
  464. [    1.170674] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
  465. [    1.173193] Console: switching to colour frame buffer device 210x65
  466. [    1.174462] fb0: nouveaufb frame buffer device
  467. [    1.174465] drm: registered panic notifier
  468. [    1.174477] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
  469. [    1.177924] brd: module loaded
  470. [    1.179609] loop: module loaded
  471. [    1.180729] pata_sis 0000:00:02.5: version 0.5.2
  472. [    1.181587] scsi0 : pata_sis
  473. [    1.181816] scsi1 : pata_sis
  474. [    1.182681] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
  475. [    1.182685] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
  476. [    1.183126] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  477. [    1.183130] e1000: Copyright (c) 1999-2006 Intel Corporation.
  478. [    1.183210] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
  479. [    1.183213] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  480. [    1.183383] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  481. [    1.183386] e100: Copyright(c) 1999-2006 Intel Corporation
  482. [    1.183703] sky2: driver version 1.28
  483. [    1.183877] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  484. [    1.183884] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
  485. [    1.183971] 8139too: 8139too Fast Ethernet driver 0.9.28
  486. [    1.184040] 8139too 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  487. [    1.184807] 8139too 0000:00:0e.0: eth0: RealTek RTL8139 at 0xd400, 00:c9:00:02:c6:36, IRQ 18
  488. [    1.184972] console [netcon0] enabled
  489. [    1.184974] netconsole: network logging started
  490. [    1.185339] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  491. [    1.185343] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
  492. [    1.185383] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
  493. [    1.185413] ehci_hcd 0000:00:03.2: EHCI Host Controller
  494. [    1.185445] drivers/usb/core/inode.c: creating file 'devices'
  495. [    1.185451] drivers/usb/core/inode.c: creating file '001'
  496. [    1.185544] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
  497. [    1.185560] ehci_hcd 0000:00:03.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
  498. [    1.185566] ehci_hcd 0000:00:03.2: reset hcc_params 7070 thresh 7 uframes 1024
  499. [    1.185610] ehci_hcd 0000:00:03.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  500. [    1.185621] ehci_hcd 0000:00:03.2: MWI active
  501. [    1.185624] ehci_hcd 0000:00:03.2: supports USB remote wakeup
  502. [    1.185652] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000
  503. [    1.185658] ehci_hcd 0000:00:03.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  504. [    1.185668] ehci_hcd 0000:00:03.2: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  505. [    1.191016] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
  506. [    1.191083] usb usb1: default language 0x0409
  507. [    1.191093] usb usb1: udev 1, busnum 1, minor = 0
  508. [    1.191096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  509. [    1.191100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  510. [    1.191104] usb usb1: Product: EHCI Host Controller
  511. [    1.191107] usb usb1: Manufacturer: Linux 3.0.0+ ehci_hcd
  512. [    1.191110] usb usb1: SerialNumber: 0000:00:03.2
  513. [    1.191228] usb usb1: usb_probe_device
  514. [    1.191234] usb usb1: configuration #1 chosen from 1 choice
  515. [    1.191247] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  516. [    1.191336] hub 1-0:1.0: usb_probe_interface
  517. [    1.191340] hub 1-0:1.0: usb_probe_interface - got id
  518. [    1.191343] hub 1-0:1.0: USB hub found
  519. [    1.191351] hub 1-0:1.0: 6 ports detected
  520. [    1.191354] hub 1-0:1.0: standalone hub
  521. [    1.191357] hub 1-0:1.0: no power switching (usb 1.0)
  522. [    1.191360] hub 1-0:1.0: individual port over-current protection
  523. [    1.191364] hub 1-0:1.0: power on to power good time: 20ms
  524. [    1.191370] hub 1-0:1.0: local power source is good
  525. [    1.191374] hub 1-0:1.0: trying to enable port power on non-switchable hub
  526. [    1.191404] drivers/usb/core/inode.c: creating file '001'
  527. [    1.191516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  528. [    1.191520] ohci_hcd: block sizes: ed 64 td 64
  529. [    1.191551] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  530. [    1.191565] ohci_hcd 0000:00:03.0: OHCI Host Controller
  531. [    1.191578] drivers/usb/core/inode.c: creating file '002'
  532. [    1.191671] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
  533. [    1.191701] ohci_hcd 0000:00:03.0: created debug files
  534. [    1.191705] ohci_hcd 0000:00:03.0: supports USB remote wakeup
  535. [    1.191720] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000
  536. [    1.242017] ohci_hcd 0000:00:03.0: enabling initreset quirk
  537. [    1.244030] ohci_hcd 0000:00:03.0: OHCI controller state
  538. [    1.244034] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers
  539. [    1.244039] ohci_hcd 0000:00:03.0: control 0x283 RWC HCFS=operational CBSR=3
  540. [    1.244044] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0
  541. [    1.244049] ohci_hcd 0000:00:03.0: intrstatus 0x00000004 SF
  542. [    1.244053] ohci_hcd 0000:00:03.0: intrenable 0x8000004a MIE RHSC RD WDH
  543. [    1.244059] ohci_hcd 0000:00:03.0: hcca frame #0003
  544. [    1.244065] ohci_hcd 0000:00:03.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
  545. [    1.244069] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000
  546. [    1.244074] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE
  547. [    1.244080] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS
  548. [    1.244085] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS
  549. [    1.244090] ohci_hcd 0000:00:03.0: roothub.portstatus [2] 0x00000100 PPS
  550. [    1.244101] usb usb2: default language 0x0409
  551. [    1.244108] usb usb2: udev 1, busnum 2, minor = 128
  552. [    1.244112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  553. [    1.244115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  554. [    1.244118] usb usb2: Product: OHCI Host Controller
  555. [    1.244121] usb usb2: Manufacturer: Linux 3.0.0+ ohci_hcd
  556. [    1.244124] usb usb2: SerialNumber: 0000:00:03.0
  557. [    1.244231] usb usb2: usb_probe_device
  558. [    1.244235] usb usb2: configuration #1 chosen from 1 choice
  559. [    1.244245] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  560. [    1.244334] hub 2-0:1.0: usb_probe_interface
  561. [    1.244337] hub 2-0:1.0: usb_probe_interface - got id
  562. [    1.244340] hub 2-0:1.0: USB hub found
  563. [    1.244350] hub 2-0:1.0: 3 ports detected
  564. [    1.244352] hub 2-0:1.0: standalone hub
  565. [    1.244355] hub 2-0:1.0: no power switching (usb 1.0)
  566. [    1.244357] hub 2-0:1.0: no over-current protection
  567. [    1.244360] hub 2-0:1.0: power on to power good time: 2ms
  568. [    1.244366] hub 2-0:1.0: local power source is good
  569. [    1.244369] hub 2-0:1.0: trying to enable port power on non-switchable hub
  570. [    1.244387] drivers/usb/core/inode.c: creating file '001'
  571. [    1.244414] ehci_hcd 0000:00:03.2: HS companion for 0000:00:03.0
  572. [    1.244438] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  573. [    1.244452] ohci_hcd 0000:00:03.1: OHCI Host Controller
  574. [    1.244459] drivers/usb/core/inode.c: creating file '003'
  575. [    1.244552] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
  576. [    1.244581] ohci_hcd 0000:00:03.1: created debug files
  577. [    1.244585] ohci_hcd 0000:00:03.1: supports USB remote wakeup
  578. [    1.244601] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
  579. [    1.291025] ehci_hcd 0000:00:03.2: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
  580. [    1.291031] hub 1-0:1.0: port 1: status 0501 change 0001
  581. [    1.291042] ehci_hcd 0000:00:03.2: GetStatus port:3 status 001403 0  ACK POWER sig=k CSC CONNECT
  582. [    1.291046] hub 1-0:1.0: port 3: status 0501 change 0001
  583. [    1.291055] ehci_hcd 0000:00:03.2: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
  584. [    1.291059] hub 1-0:1.0: port 4: status 0501 change 0001
  585. [    1.295014] ohci_hcd 0000:00:03.1: enabling initreset quirk
  586. [    1.297026] ohci_hcd 0000:00:03.1: OHCI controller state
  587. [    1.297030] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers
  588. [    1.297035] ohci_hcd 0000:00:03.1: control 0x283 RWC HCFS=operational CBSR=3
  589. [    1.297040] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0
  590. [    1.297044] ohci_hcd 0000:00:03.1: intrstatus 0x00000004 SF
  591. [    1.297048] ohci_hcd 0000:00:03.1: intrenable 0x8000004a MIE RHSC RD WDH
  592. [    1.297054] ohci_hcd 0000:00:03.1: hcca frame #0003
  593. [    1.297059] ohci_hcd 0000:00:03.1: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
  594. [    1.297064] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000
  595. [    1.297069] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE
  596. [    1.297074] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS
  597. [    1.297079] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS
  598. [    1.297084] ohci_hcd 0000:00:03.1: roothub.portstatus [2] 0x00000100 PPS
  599. [    1.297094] usb usb3: default language 0x0409
  600. [    1.297102] usb usb3: udev 1, busnum 3, minor = 256
  601. [    1.297105] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  602. [    1.297109] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  603. [    1.297112] usb usb3: Product: OHCI Host Controller
  604. [    1.297115] usb usb3: Manufacturer: Linux 3.0.0+ ohci_hcd
  605. [    1.297118] usb usb3: SerialNumber: 0000:00:03.1
  606. [    1.297233] usb usb3: usb_probe_device
  607. [    1.297236] usb usb3: configuration #1 chosen from 1 choice
  608. [    1.297247] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  609. [    1.297330] hub 3-0:1.0: usb_probe_interface
  610. [    1.297333] hub 3-0:1.0: usb_probe_interface - got id
  611. [    1.297336] hub 3-0:1.0: USB hub found
  612. [    1.297344] hub 3-0:1.0: 3 ports detected
  613. [    1.297347] hub 3-0:1.0: standalone hub
  614. [    1.297349] hub 3-0:1.0: no power switching (usb 1.0)
  615. [    1.297352] hub 3-0:1.0: no over-current protection
  616. [    1.297355] hub 3-0:1.0: power on to power good time: 2ms
  617. [    1.297360] hub 3-0:1.0: local power source is good
  618. [    1.297363] hub 3-0:1.0: trying to enable port power on non-switchable hub
  619. [    1.297381] drivers/usb/core/inode.c: creating file '001'
  620. [    1.297408] ehci_hcd 0000:00:03.2: HS companion for 0000:00:03.1
  621. [    1.297495] uhci_hcd: USB Universal Host Controller Interface driver
  622. [    1.297733] usbcore: registered new interface driver usblp
  623. [    1.297736] Initializing USB Mass Storage driver...
  624. [    1.297847] usbcore: registered new interface driver usb-storage
  625. [    1.297849] USB Mass Storage support registered.
  626. [    1.297950] usbcore: registered new interface driver libusual
  627. [    1.298272] i8042: PNP: No PS/2 controller found. Probing ports directly.
  628. [    1.331074] serio: i8042 KBD port at 0x60,0x64 irq 1
  629. [    1.331335] mousedev: PS/2 mouse device common for all mice
  630. [    1.331848] i2c-core: driver [synaptics_i2c] registered
  631. [    1.331879] rtc_cmos 00:03: RTC can wake from S4
  632. [    1.332085] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  633. [    1.332115] rtc0: alarms up to one year, 114 bytes nvram
  634. [    1.332252] i2c-core: driver [smbus_alert] registered
  635. [    1.332256] i2c /dev entries driver
  636. [    1.332419] i2c-dev: adapter [nouveau-0000:01:00.0-2] registered as minor 0
  637. [    1.332502] i2c-dev: adapter [nouveau-0000:01:00.0-1] registered as minor 1
  638. [    1.332586] i2c-dev: adapter [nouveau-0000:01:00.0-0] registered as minor 2
  639. [    1.333780] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
  640. [    1.333881] i2c-dev: adapter [SiS96x SMBus adapter at 0x0c00] registered as minor 3
  641. [    1.333952] i2c i2c-3: adapter [SiS96x SMBus adapter at 0x0c00] registered
  642. [    1.334583] i2c-parport-light: adapter type unspecified
  643. [    1.334771] usbcore: registered new interface driver i2c-tiny-usb
  644. [    1.335248] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  645. [    1.335366] cpuidle: using governor ladder
  646. [    1.335369] cpuidle: using governor menu
  647. [    1.335373] EFI Variables Facility v0.08 2004-May-17
  648. [    1.337431] usbcore: registered new interface driver usbhid
  649. [    1.337434] usbhid: USB HID core driver
  650. [    1.337514] usbcore: registered new interface driver r8712u
  651. [    1.337517] Initializing Realtek PCIE storage driver...
  652. [    1.337612] asus_wmi: Asus Management GUID not found
  653. [    1.337877] ata1.00: ATA-7: Maxtor 7L320R0, BAJ41G20, max UDMA/133
  654. [    1.337882] ata1.00: 625142448 sectors, multi 16: LBA48
  655. [    1.338228] asus_wmi: Management GUID not found
  656. [    1.338428] dell_wmi: No known WMI GUID found
  657. [    1.338433] dell_wmi_aio: No known WMI GUID found
  658. [    1.338435] acer_wmi: Acer Laptop ACPI-WMI Extras
  659. [    1.338451] acer_wmi: No or unsupported WMI interface, unable to load
  660. [    1.338489] msi_wmi: This machine doesn't have MSI-hotkeys through WMI
  661. [    1.340957] EMU10K1_Audigy 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  662. [    1.340983] ALSA sound/pci/emu10k1/emu10k1_main.c:1768 vendor = 0x1102, device = 0x4, subsystem_vendor_id = 0x20021102, subsystem_id = 0x2002
  663. [    1.340990] ALSA sound/pci/emu10k1/emu10k1_main.c:1794 Sound card name = SB Audigy 2 ZS [SB0350]
  664. [    1.343623] ALSA sound/pci/emu10k1/emufx.c:1569 Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
  665. [    1.344155] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
  666. [    1.348779] ata1.00: configured for UDMA/133
  667. [    1.348972] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 7L320R0   BAJ4 PQ: 0 ANSI: 5
  668. [    1.356523] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  669. [    1.356600] sd 0:0:0:0: [sda] Write Protect is off
  670. [    1.356605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  671. [    1.356637] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  672. [    1.357528] sd 0:0:0:0: Attached scsi generic sg0 type 0
  673. [    1.360879] ALSA device list:
  674. [    1.360884]   #0: SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xd800, irq 16
  675. [    1.361051] Netfilter messages via NETLINK v0.30.
  676. [    1.361099] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  677. [    1.361568] ctnetlink v0.93: registering with nfnetlink.
  678. [    1.362178] ip_tables: (C) 2000-2006 Netfilter Core Team
  679. [    1.362238] TCP cubic registered
  680. [    1.362241] Initializing XFRM netlink socket
  681. [    1.362789] NET: Registered protocol family 10
  682. [    1.363892] ip6_tables: (C) 2000-2006 Netfilter Core Team
  683. [    1.363970] IPv6 over IPv4 tunneling driver
  684. [    1.364898] NET: Registered protocol family 17
  685. [    1.364917] Registering the dns_resolver key type
  686. [    1.364956] Using IPI No-Shortcut mode
  687. [    1.365294] PM: Hibernation image not present or could not be loaded.
  688. [    1.365325] registered taskstats version 1
  689. [    1.365568]   Magic number: 7:459:80
  690. [    1.391027] hub 1-0:1.0: state 7 ports 6 chg 001a evt 0000
  691. [    1.391043] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  692. [    1.391060] ehci_hcd 0000:00:03.2: port 1 low speed --> companion
  693. [    1.398340]  sda: sda1 sda2 sda3
  694. [    1.398988] sd 0:0:0:0: [sda] Attached SCSI disk
  695. [    1.442022] ehci_hcd 0000:00:03.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
  696. [    1.442045] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
  697. [    1.442053] ehci_hcd 0000:00:03.2: port 3 low speed --> companion
  698. [    1.442075] Refined TSC clocksource calibration: 1833.125 MHz.
  699. [    1.442082] Switching to clocksource tsc
  700. [    1.493013] ehci_hcd 0000:00:03.2: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
  701. [    1.493029] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
  702. [    1.530220] ata2.00: ATAPI: PIONEER DVD-RW  DVR-116D, 1.09, max UDMA/66
  703. [    1.530228] ata2.01: ATAPI: IDE-DVD ROM 6116, DD04, max UDMA/33
  704. [    1.536212] ata2.00: configured for UDMA/66
  705. [    1.544293] ehci_hcd 0000:00:03.2: port 4 high speed
  706. [    1.544300] ehci_hcd 0000:00:03.2: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
  707. [    1.558235] ata2.01: configured for UDMA/33
  708. [    1.595015] usb 1-4: new high speed USB device number 4 using ehci_hcd
  709. [    1.620985] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-116D 1.09 PQ: 0 ANSI: 5
  710. [    1.646293] ehci_hcd 0000:00:03.2: port 4 high speed
  711. [    1.646300] ehci_hcd 0000:00:03.2: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
  712. [    1.682310] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  713. [    1.682315] cdrom: Uniform CD-ROM driver Revision: 3.20
  714. [    1.682552] sr 1:0:0:0: Attached scsi CD-ROM sr0
  715. [    1.682844] sr 1:0:0:0: Attached scsi generic sg1 type 5
  716. [    1.683307] scsi 1:0:1:0: CD-ROM            IDE-DVD  ROM 6116         DD04 PQ: 0 ANSI: 5
  717. [    1.685509] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
  718. [    1.685720] sr 1:0:1:0: Attached scsi CD-ROM sr1
  719. [    1.685959] sr 1:0:1:0: Attached scsi generic sg2 type 5
  720. [    1.686114] Freeing unused kernel memory: 448k freed
  721. [    1.686789] Write protecting the kernel text: 8624k
  722. [    1.686841] Write protecting the kernel read-only data: 2856k
  723. [    1.709934] usb 1-4: default language 0x0409
  724. [    1.710432] usb 1-4: udev 4, busnum 1, minor = 3
  725. [    1.710436] usb 1-4: New USB device found, idVendor=1058, idProduct=1003
  726. [    1.710440] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  727. [    1.710444] usb 1-4: Product: External HDD    
  728. [    1.710447] usb 1-4: Manufacturer: Western Digital
  729. [    1.710450] usb 1-4: SerialNumber: 57442D574341563930323335373935
  730. [    1.711277] usb 1-4: usb_probe_device
  731. [    1.711284] usb 1-4: configuration #1 chosen from 1 choice
  732. [    1.711445] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
  733. [    1.712692] usb-storage 1-4:1.0: usb_probe_interface
  734. [    1.712702] usb-storage 1-4:1.0: usb_probe_interface - got id
  735. [    1.713889] scsi2 : usb-storage 1-4:1.0
  736. [    1.716512] drivers/usb/core/inode.c: creating file '004'
  737. [    1.716547] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008
  738. [    1.716563] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0006
  739. [    1.716573] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
  740. [    1.716581] hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
  741. [    1.734698] ln used greatest stack depth: 6764 bytes left
  742. [    1.750256] dracut: dracut-009-12.fc15
  743. [    1.762117] dracut: rd.luks=0: removing cryptoluks activation
  744. [    1.765961] dracut: rd.lvm=0: removing LVM activation
  745. [    1.776166] udev[1140]: starting version 167
  746. [    1.820128] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
  747. [    1.825583] setfont used greatest stack depth: 6496 bytes left
  748. [    1.864731] dracut: Starting plymouth daemon
  749. [    1.874022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  750. [    1.874027] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  751. [    1.877764] i2c i2c-1: NAK from device addr 0x50 msg #0
  752. [    1.882031] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  753. [    1.890020] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  754. [    1.890024] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  755. [    1.893712] i2c i2c-1: NAK from device addr 0x50 msg #0
  756. [    1.906023] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  757. [    1.906027] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  758. [    1.909328] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  759. [    1.909332] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  760. [    1.912632] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  761. [    1.912636] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  762. [    1.933080] usb 2-1: new low speed USB device number 2 using ohci_hcd
  763. [    1.997017] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  764. [    2.072057] usb 2-1: skipped 1 descriptor after interface
  765. [    2.075042] usb 2-1: default language 0x0409
  766. [    2.079045] usb 2-1: udev 2, busnum 2, minor = 129
  767. [    2.079050] usb 2-1: New USB device found, idVendor=04f3, idProduct=0210
  768. [    2.079054] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  769. [    2.079058] usb 2-1: Product: PS/2+USB Mouse
  770. [    2.083635] usb 2-1: usb_probe_device
  771. [    2.083645] usb 2-1: configuration #1 chosen from 1 choice
  772. [    2.085069] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  773. [    2.090987] usbhid 2-1:1.0: usb_probe_interface
  774. [    2.090996] usbhid 2-1:1.0: usb_probe_interface - got id
  775. [    2.105229] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input2
  776. [    2.110450] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:03.0-1/input0
  777. [    2.110484] drivers/usb/core/inode.c: creating file '002'
  778. [    2.110532] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
  779. [    2.110544] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
  780. [    2.210039] dracut: rd.dm=0: removing DM RAID activation
  781. [    2.212366] udevd used greatest stack depth: 6428 bytes left
  782. [    2.214279] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
  783. [    2.214902] dracut: rd.md=0: removing MD RAID activation
  784. [    2.276058] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  785. [    2.327331] usb 2-2: new low speed USB device number 3 using ohci_hcd
  786. [    2.392066] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  787. [    2.454029] ohci_hcd 0000:00:03.1: auto-stop root hub
  788. [    2.469070] usb 2-2: skipped 1 descriptor after interface
  789. [    2.469078] usb 2-2: skipped 1 descriptor after interface
  790. [    2.469084] usb 2-2: udev 3, busnum 2, minor = 130
  791. [    2.469088] usb 2-2: New USB device found, idVendor=1267, idProduct=0103
  792. [    2.469092] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  793. [    2.474541] usb 2-2: usb_probe_device
  794. [    2.474551] usb 2-2: configuration #1 chosen from 1 choice
  795. [    2.476374] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
  796. [    2.482985] usbhid 2-2:1.0: usb_probe_interface
  797. [    2.482994] usbhid 2-2:1.0: usb_probe_interface - got id
  798. [    2.497749] input: HID 1267:0103 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3
  799. [    2.503688] generic-usb 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:03.0-2/input0
  800. [    2.503731] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
  801. [    2.506132] cdrom_id used greatest stack depth: 6324 bytes left
  802. [    2.510139] usbhid 2-2:1.1: usb_probe_interface
  803. [    2.510150] usbhid 2-2:1.1: usb_probe_interface - got id
  804. [    2.527772] input: HID 1267:0103 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input4
  805. [    2.532780] generic-usb 0003:1267:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:03.0-2/input1
  806. [    2.532816] drivers/usb/core/inode.c: creating file '003'
  807. [    2.532852] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
  808. [    2.532856] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0004
  809. [    2.708731] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  810. [    2.716742] scsi 2:0:0:0: Direct-Access     WD       5000AAD External 1.75 PQ: 0 ANSI: 4
  811. [    2.722395] sd 2:0:0:0: Attached scsi generic sg3 type 0
  812. [    2.722991] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  813. [    2.723565] sd 2:0:0:0: [sdb] Write Protect is off
  814. [    2.723570] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
  815. [    2.724064] sd 2:0:0:0: [sdb] No Caching mode page present
  816. [    2.724070] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  817. [    2.726813] sd 2:0:0:0: [sdb] No Caching mode page present
  818. [    2.726820] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  819. [    2.727352]  sdb: sdb1
  820. [    2.734152] sd 2:0:0:0: [sdb] No Caching mode page present
  821. [    2.734161] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  822. [    2.734166] sd 2:0:0:0: [sdb] Attached SCSI disk
  823. [    2.772505] dracut: Checking filesystems
  824. [    2.772544] dracut: fsck -T -t noopts=_netdev -A -a
  825. [    2.836078] dracut: _Fedora-15-i686-: clean, 701829/12804096 files, 9162449/51200000 blocks
  826. [    2.836280] dracut: Remounting /dev/disk/by-uuid/f0ff8775-6706-41a6-a3fa-fae42412f0ec with -o ro,
  827. [    2.913166] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  828. [    2.915725] dracut: Mounted root filesystem /dev/sda2
  829. [    2.975247] udevd used greatest stack depth: 6176 bytes left
  830. [    2.975459] udevd used greatest stack depth: 6164 bytes left
  831. [    2.985166] dracut: Switching root
  832. [    3.464429] SELinux:  Disabled at runtime.
  833. [    3.464451] SELinux:  Unregistering netfilter hooks
  834. [    3.464472] type=1404 audit(1312639512.463:2): selinux=0 auid=4294967295 ses=4294967295
  835. [    3.497900] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
  836. [    3.547256] systemd[1]: Set hostname to <mernivia>.
  837. [    4.575254] systemd[1]: Failed to initialize automounter: No such file or directory
  838. [    4.575281] systemd[1]: Unit sys-kernel-security.automount entered failed state.
  839. [    4.764025] touch used greatest stack depth: 6032 bytes left
  840. [    4.814313] systemd-readahead-collect[1769]: Failed to create fanotify object: Function not implemented
  841. [    4.814418] systemd-readahead-replay[1770]: Bumped block_nr parameter of /dev/sda to 16384. This is a temporary hack and should be removed one day.
  842. [    5.381166] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
  843. [    7.155891] EXT4-fs (sda2): re-mounted. Opts: (null)
  844. [   11.200032] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  845. [   11.200039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  846. [   11.203734] i2c i2c-1: NAK from device addr 0x50 msg #0
  847. [   13.654753] systemd-readahe used greatest stack depth: 5984 bytes left
  848. [   13.791715] udev[1796]: starting version 167
  849. [   13.845632] udev-configure-printer[1882]: add /bus/pci/drivers/lpc_sch
  850. [   13.845905] udev-configure-printer[1882]: Failed to get parent
  851. [   14.070445] mtp-probe[2113]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1"
  852. [   14.074284] mtp-probe[2113]: bus: 2, device: 2 was not an MTP device
  853. [   14.100692] mtp-probe[2129]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2"
  854. [   14.104896] mtp-probe[2129]: bus: 2, device: 3 was not an MTP device
  855. [   14.151832] mtp-probe[2162]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:03.2/usb1/1-4"
  856. [   14.153847] mtp-probe[2162]: bus: 1, device: 4 was not an MTP device
  857. [   14.578944] Adding 5365756k swap on /dev/sda3.  Priority:0 extents:1 across:5365756k
  858. [   14.592311] udev[2027]: renamed network interface eth0 to p6p1
  859. [   14.681033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  860. [   14.681039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  861. [   14.684765] i2c i2c-1: NAK from device addr 0x50 msg #0
  862. [   14.697022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  863. [   14.697027] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  864. [   14.700820] i2c i2c-1: NAK from device addr 0x50 msg #0
  865. [   14.713025] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  866. [   14.713029] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  867. [   14.717188] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  868. [   14.717193] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  869. [   14.720723] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  870. [   14.720727] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  871. [   15.038347] lvm used greatest stack depth: 5728 bytes left
  872. [   15.328392] acpid[2536]: starting up with proc fs
  873. [   15.334070] ntpd[2527]: ntpd [email protected] Fri May  6 16:27:05 UTC 2011 (1)
  874. [   15.334487] abrtd[2523]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
  875. [   15.337511] acpid[2536]: skipping incomplete file /etc/acpi/events/videoconf
  876. [   16.213811] 8139too 0000:00:0e.0: p6p1: link up, 10Mbps, half-duplex, lpa 0x0000
  877. [   18.288225] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  878. [   18.288231] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  879. [   18.298852] i2c i2c-1: NAK from device addr 0x50 msg #0
  880. [   18.311054] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  881. [   18.311061] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  882. [   18.317824] i2c i2c-1: NAK from device addr 0x50 msg #0
  883. [   18.332245] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  884. [   18.332252] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  885. [   18.339514] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  886. [   18.339518] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  887. [   18.343574] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  888. [   18.343578] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  889. [   18.564193] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  890. [   18.564200] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  891. [   18.568014] i2c i2c-1: NAK from device addr 0x50 msg #0
  892. [   18.581017] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  893. [   18.581021] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  894. [   18.584749] i2c i2c-1: NAK from device addr 0x50 msg #0
  895. [   18.597067] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  896. [   18.597072] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  897. [   18.600412] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  898. [   18.600416] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  899. [   18.603756] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  900. [   18.603760] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  901. [   18.831202] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
  902. [   18.841604] [drm] nouveau 0000:01:00.0: 0xCD0D: Parsing digital output script table
  903. [   18.891626] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
  904. [   18.891631] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
  905. [   21.216035] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  906. [   21.216042] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  907. [   21.219888] i2c i2c-1: NAK from device addr 0x50 msg #0
  908. [   26.514014] p6p1: no IPv6 routers present
  909. [   30.642809] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  910. [   30.642815] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  911. [   30.652713] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  912. [   30.652720] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  913. [   30.660746] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  914. [   30.660753] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  915. [   30.865242] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  916. [   30.865249] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  917. [   30.872205] i2c i2c-1: NAK from device addr 0x50 msg #0
  918. [   31.232030] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  919. [   31.232036] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  920. [   31.236122] i2c i2c-1: NAK from device addr 0x50 msg #0
  921. [   41.248596] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  922. [   41.248602] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  923. [   41.252478] i2c i2c-1: NAK from device addr 0x50 msg #0
  924. [   49.138938] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  925. [   49.138945] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  926. [   49.145883] i2c i2c-1: NAK from device addr 0x50 msg #0
  927. [   49.161096] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  928. [   49.161103] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  929. [   49.166101] i2c i2c-1: NAK from device addr 0x50 msg #0
  930. [   49.179131] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  931. [   49.179138] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  932. [   49.182885] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  933. [   49.182889] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1
  934. [   49.191425] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
  935. [   49.191429] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
  936. [   51.264097] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  937. [   51.264104] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  938. [   51.271860] i2c i2c-1: NAK from device addr 0x50 msg #0
  939. [   61.280037] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  940. [   61.280044] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  941. [   61.285882] i2c i2c-1: NAK from device addr 0x50 msg #0
  942. [   71.296033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  943. [   71.296039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  944. [   71.299976] i2c i2c-1: NAK from device addr 0x50 msg #0
  945. [   81.312032] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  946. [   81.312054] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  947. [   81.316013] i2c i2c-1: NAK from device addr 0x50 msg #0
  948. [   91.328036] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  949. [   91.328042] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  950. [   91.331850] i2c i2c-1: NAK from device addr 0x50 msg #0
  951. [  101.344033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  952. [  101.344039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  953. [  101.347860] i2c i2c-1: NAK from device addr 0x50 msg #0
  954. [  111.360031] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  955. [  111.360038] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  956. [  111.363863] i2c i2c-1: NAK from device addr 0x50 msg #0
  957. [  121.376032] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  958. [  121.376038] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  959. [  121.379851] i2c i2c-1: NAK from device addr 0x50 msg #0
  960. [  131.392035] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  961. [  131.392042] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  962. [  131.395850] i2c i2c-1: NAK from device addr 0x50 msg #0
  963. [  141.408035] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  964. [  141.408041] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  965. [  141.411851] i2c i2c-1: NAK from device addr 0x50 msg #0
  966. [  151.424043] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  967. [  151.424049] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  968. [  151.428551] i2c i2c-1: NAK from device addr 0x50 msg #0
  969. [  161.440026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  970. [  161.440033] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  971. [  161.443853] i2c i2c-1: NAK from device addr 0x50 msg #0
  972. [  171.456847] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  973. [  171.456854] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  974. [  171.460975] i2c i2c-1: NAK from device addr 0x50 msg #0
  975. [  181.472030] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  976. [  181.472036] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  977. [  181.475910] i2c i2c-1: NAK from device addr 0x50 msg #0
  978. [  191.488022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  979. [  191.488029] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  980. [  191.491918] i2c i2c-1: NAK from device addr 0x50 msg #0
  981. [  201.504048] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  982. [  201.504054] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  983. [  201.510104] i2c i2c-1: NAK from device addr 0x50 msg #0
  984. [  211.520026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  985. [  211.520032] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  986. [  211.523849] i2c i2c-1: NAK from device addr 0x50 msg #0
  987. [  221.536027] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  988. [  221.536033] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  989. [  221.539849] i2c i2c-1: NAK from device addr 0x50 msg #0
  990. [  231.552070] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  991. [  231.552076] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  992. [  231.557062] i2c i2c-1: NAK from device addr 0x50 msg #0
  993. [  241.568029] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  994. [  241.568036] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  995. [  241.572028] i2c i2c-1: NAK from device addr 0x50 msg #0
  996. [  251.584031] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  997. [  251.584037] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  998. [  251.587861] i2c i2c-1: NAK from device addr 0x50 msg #0
  999. [  261.600028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1000. [  261.600034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1001. [  261.603862] i2c i2c-1: NAK from device addr 0x50 msg #0
  1002. [  271.616027] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1003. [  271.616033] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1004. [  271.619847] i2c i2c-1: NAK from device addr 0x50 msg #0
  1005. [  281.632028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1006. [  281.632034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1007. [  281.635859] i2c i2c-1: NAK from device addr 0x50 msg #0
  1008. [  291.648043] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1009. [  291.648050] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1010. [  291.651874] i2c i2c-1: NAK from device addr 0x50 msg #0
  1011. [  301.664033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1012. [  301.664039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1013. [  301.667858] i2c i2c-1: NAK from device addr 0x50 msg #0
  1014. [  311.680028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1015. [  311.680035] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1016. [  311.683860] i2c i2c-1: NAK from device addr 0x50 msg #0
  1017. [  321.696029] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1018. [  321.696036] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1019. [  321.699860] i2c i2c-1: NAK from device addr 0x50 msg #0
  1020. [  331.712038] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1021. [  331.712044] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1022. [  331.716074] i2c i2c-1: NAK from device addr 0x50 msg #0
  1023. [  341.728036] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1024. [  341.728043] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1025. [  341.731868] i2c i2c-1: NAK from device addr 0x50 msg #0
  1026. [  351.744034] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1027. [  351.744040] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1028. [  351.748004] i2c i2c-1: NAK from device addr 0x50 msg #0
  1029. [  361.760026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1030. [  361.760032] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1031. [  361.763942] i2c i2c-1: NAK from device addr 0x50 msg #0
  1032. [  371.776032] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1033. [  371.776038] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1034. [  371.779845] i2c i2c-1: NAK from device addr 0x50 msg #0
  1035. [  381.792033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1036. [  381.792039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1037. [  381.795846] i2c i2c-1: NAK from device addr 0x50 msg #0
  1038. [  391.808029] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1039. [  391.808034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1040. [  391.811859] i2c i2c-1: NAK from device addr 0x50 msg #0
  1041. [  401.824029] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1042. [  401.824035] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1043. [  401.827859] i2c i2c-1: NAK from device addr 0x50 msg #0
  1044. [  411.840038] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1045. [  411.840044] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1046. [  411.846823] i2c i2c-1: NAK from device addr 0x50 msg #0
  1047. [  421.856734] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1048. [  421.856740] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1049. [  421.860548] i2c i2c-1: NAK from device addr 0x50 msg #0
  1050. [  431.872028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1051. [  431.872034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1052. [  431.875861] i2c i2c-1: NAK from device addr 0x50 msg #0
  1053. [  441.888029] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1054. [  441.888035] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1055. [  441.891859] i2c i2c-1: NAK from device addr 0x50 msg #0
  1056. [  451.904034] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1057. [  451.904041] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1058. [  451.907951] i2c i2c-1: NAK from device addr 0x50 msg #0
  1059. [  461.920034] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1060. [  461.920040] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1061. [  461.923857] i2c i2c-1: NAK from device addr 0x50 msg #0
  1062. [  471.936028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1063. [  471.936034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1064. [  471.939863] i2c i2c-1: NAK from device addr 0x50 msg #0
  1065. [  481.953143] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1066. [  481.953150] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1067. [  481.958470] i2c i2c-1: NAK from device addr 0x50 msg #0
  1068. [  491.968033] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1069. [  491.968039] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1070. [  491.971903] i2c i2c-1: NAK from device addr 0x50 msg #0
  1071. [  501.984030] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1072. [  501.984036] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1073. [  501.987857] i2c i2c-1: NAK from device addr 0x50 msg #0
  1074. [  512.000036] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1075. [  512.000043] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1076. [  512.003916] i2c i2c-1: NAK from device addr 0x50 msg #0
  1077. [  522.016028] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1078. [  522.016034] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1079. [  522.019848] i2c i2c-1: NAK from device addr 0x50 msg #0
  1080. [  532.032026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1081. [  532.032032] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1082. [  532.035903] i2c i2c-1: NAK from device addr 0x50 msg #0
  1083. [  542.048025] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1084. [  542.048031] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1085. [  542.051845] i2c i2c-1: NAK from device addr 0x50 msg #0
  1086. [  552.064026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
  1087. [  552.064033] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1
  1088. [  552.067868] i2c i2c-1: NAK from device addr 0x50 msg #0
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!