API tools faq
paste
Advertisement
CGarces

full dmesg S905

CGarces
Oct 10th, 2016
369
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.52 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Initializing cgroup subsys cpu
  2. [ 0.000000@0] Linux version 3.14.29 (kszaq@FPGAWorker) (gcc version 5.3.0 (GCC) ) #1 SMP Mon Oct 3 20:34:26 CEST 2016
  3. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  4. [ 0.000000@0] no prop version_code
  5. [ 0.000000@0] bootconsole [earlycon0] enabled
  6. [ 0.000000@0] fdt Reserved memory table:
  7. [ 0.000000@0] linux,meson-fb: 0x000000003e000000 - 0x0000000040000000 (32 MiB)
  8. [ 0.000000@0] linux,di: 0x000000003c200000 - 0x000000003e000000 (30 MiB)
  9. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003c200000, size 30 MiB
  10. [ 0.000000@0] linux,ion-dev: 0x000000003a200000 - 0x000000003c200000 (32 MiB)
  11. [ 0.000000@0] linux,ppmgr: 0x0000000038200000 - 0x000000003a200000 (32 MiB)
  12. [ 0.000000@0] linux,codec_mm_cma: 0x0000000026800000 - 0x0000000033800000 (208 MiB)
  13. [ 0.000000@0] linux,picdec: 0x0000000038200000 - 0x0000000038200000 (0 MiB)
  14. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  15. [ 0.000000@0] linux,codec_mm_reserved: 0x0000000034100000 - 0x0000000038200000 (65 MiB)
  16. [ 0.000000@0] fdt Reserved memory total: 402 MiB
  17. [ 0.000000@0] cma: Reserved 8 MiB at 26000000
  18. [ 0.000000@0] On node 0 totalpages: 249088
  19. [ 0.000000@0] Normal zone: 4392 pages used for memmap
  20. [ 0.000000@0] Normal zone: 0 pages reserved
  21. [ 0.000000@0] Normal zone: 249088 pages, LIFO batch:31
  22. [ 0.000000@0] psci: probing function IDs from device-tree
  23. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0340a7000 s17792 r8192 d23168 u49152
  24. [ 0.000000@0] pcpu-alloc: s17792 r8192 d23168 u49152 alloc=12*4096
  25. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  26. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 244696
  27. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apee androidboot.hardware=amlogic bootfromsd console=tty0 systemd.show_status=auto
  28. [ 0.000000@0] logo: osd1
  29. [ 0.000000@0] logo: loaded
  30. [ 0.000000@0] logo: 0x3d800000
  31. [ 0.000000@0] logo: 1080p60hz
  32. [ 0.000000@0] vout_serve: 1080p60hz
  33. [ 0.000000@0] vout_serve: en: 1
  34. [ 0.000000@0] logo: get hdmimode: 1080p60hz
  35. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  36. [ 0.000000@0] tv_vout: cvbs performance line = 0
  37. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  38. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  39. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  40. [ 0.000000@0] Memory: 569844K/996352K available (7504K kernel code, 747K rwdata, 2860K rodata, 873K init, 5213K bss, 426508K reserved)
  41. [ 0.000000@0] Virtual kernel memory layout:
  42. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  43. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8041180000 ( 17 MB)
  44. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  45. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
  46. [ 0.000000@0] .init : 0xffffffc001aa1000 - 0xffffffc001b7b580 ( 874 kB)
  47. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001aa0354 ( 10369 kB)
  48. [ 0.000000@0] .data : 0xffffffc001b7c000 - 0xffffffc001c36ee0 ( 748 kB)
  49. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01a9ffff]
  50. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  51. [ 0.000000@0] arch_multi_cluster:0
  52. [ 0.000000@0] Hierarchical RCU implementation.
  53. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  54. [ 0.000000@0] CONFIG_RCU_FANOUT set to non-default value of 32
  55. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  56. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  57. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  58. [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
  59. [ 0.016749@0] Console: colour dummy device 80x25
  60. [ 0.021087@0] console [tty0] enabled
  61. [ 0.024672@0] bootconsole [earlycon0] disabled
  62. [ 0.029151@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  63. [ 0.029168@0] pid_max: default: 32768 minimum: 301
  64. [ 0.029289@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  65. [ 0.029302@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  66. [ 0.031231@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
  67. [ 0.031254@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
  68. [ 0.031267@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
  69. [ 0.031279@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
  70. [ 0.033913@0] ftrace: allocating 26164 entries in 103 pages
  71. [ 0.060316@0] /cpus/cpu@0: Missing clock-frequency property
  72. [ 0.060343@0] /cpus/cpu@1: Missing clock-frequency property
  73. [ 0.060355@0] /cpus/cpu@2: Missing clock-frequency property
  74. [ 0.060366@0] /cpus/cpu@3: Missing clock-frequency property
  75. [ 0.060896@0] Meson chip version = RevA (21:A - 82:0)
  76. [ 0.061255@1] CPU1: Booted secondary processor
  77. [ 0.061615@2] CPU2: Booted secondary processor
  78. [ 0.061932@3] CPU3: Booted secondary processor
  79. [ 0.061998@0] Brought up 4 CPUs
  80. [ 0.062028@0] SMP: Total of 4 processors activated.
  81. [ 0.062510@0] devtmpfs: initialized
  82. [ 0.069165@0] instabooting: 0
  83. [ 0.076139@0] pinctrl core: initialized pinctrl subsystem
  84. [ 0.076773@0] regulator-dummy: no parameters
  85. [ 0.077412@0] NET: Registered protocol family 16
  86. [ 0.079797@0] aml_vdac_init: module init
  87. [ 0.079941@0] register canvas platform driver
  88. [ 0.080068@0] register rdma platform driver
  89. [ 0.081523@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001b84000
  90. [ 0.082147@0] DMA: preallocated 256 KiB pool for atomic allocations
  91. [ 0.083173@0] software IO TLB [mem 0x23800000-0x23c00000] (4MB) mapped at [ffffffc023800000-ffffffc023bfffff]
  92. [ 0.083602@0] aml_i2c version: 20140813
  93. [ 0.083799@0] i2c-core: driver [pmu4] using legacy resume method
  94. [ 0.083884@0] codec_mm:codec_mm_module_init
  95. [ 0.084164@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  96. [ 0.084179@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  97. [ 0.084198@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  98. [ 0.084375@0] clk_sys: register PLL sys_pll success done
  99. [ 0.084394@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  100. [ 0.084404@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  101. [ 0.084414@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
  102. [ 0.084424@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
  103. [ 0.084434@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  104. [ 0.084444@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  105. [ 0.084454@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  106. [ 0.084464@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  107. [ 0.084473@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  108. [ 0.084506@0] gxl_clk: clock initialization complete
  109. [ 0.084704@0] clkmsr: Gxl msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
  110. [ 0.086989@0] aml_iomap: amlogic iomap probe done
  111. [ 0.087587@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
  112. [ 0.088368@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  113. [ 0.088867@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  114. [ 0.088900@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  115. [ 0.089062@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  116. [ 0.089086@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  117. [ 0.091261@0] codec_mm has 2 memory regions
  118. [ 0.091313@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  119. [ 0.091333@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  120. [ 0.091428@0] codec_mm has 2 memory regions
  121. [ 0.091449@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  122. [ 0.091466@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  123. [ 0.093097@0] vpu: driver version: v02
  124. [ 0.093136@0] vpu: load vpu_clk: 666667000Hz(7)
  125. [ 0.093226@0] vpu: vpu_probe OK
  126. [ 0.094619@0] tv_vout: tvout_probe
  127. [ 0.094645@0] tv_vout: major number 254 for disp
  128. [ 0.094655@0] vout_notify: vout_register_server
  129. [ 0.094664@0] tv_vout: register tv module server ok
  130. [ 0.094740@0] tv_vout: tvout_probe OK
  131. [ 0.095307@0] canvas_probe reg=00000000c8838000,size=400
  132. [ 0.095337@0] canvas maped reg_base =ffffff800007e000
  133. [ 0.099126@0] rdma_probe
  134. [ 0.316773@0] bio: create slab <bio-0> at 0
  135. [ 0.317602@0] SCSI subsystem initialized
  136. [ 0.318055@0] usbcore: registered new interface driver usbfs
  137. [ 0.318144@0] usbcore: registered new interface driver hub
  138. [ 0.318264@0] usbcore: registered new device driver usb
  139. [ 0.319015@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
  140. [ 0.319208@0] pps_core: LinuxPPS API ver. 1 registered
  141. [ 0.319220@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  142. [ 0.319286@0] PTP clock support registered
  143. [ 0.319773@0] hdmitx: system: amhdmitx_init
  144. [ 0.319785@0] hdmitx: system: Ver: 2014May6
  145. [ 0.319953@0] hdmitx: system: amhdmitx_probe
  146. [ 0.320261@0] hdmitx: system: not find match init-data
  147. [ 0.320274@0] hdmitx: system: not find match pwr-ctl
  148. [ 0.320285@0] hdmitx hpd irq = 89
  149. [ 0.320741@0] hdmitx20: Mapped PHY: 0xc0800000
  150. [ 0.320760@0] hdmitx20: Mapped PHY: 0xc1104400
  151. [ 0.320785@0] hdmitx20: Mapped PHY: 0xc8100000
  152. [ 0.320795@0] hdmitx20: Mapped PHY: 0xc8834000
  153. [ 0.320805@0] hdmitx20: Mapped PHY: 0xc883a000
  154. [ 0.320814@0] hdmitx20: Mapped PHY: 0xc883c000
  155. [ 0.320826@0] hdmitx20: Mapped PHY: 0xd0100000
  156. [ 0.320836@0] hdmitx20: Mapped PHY: 0xda83a000
  157. [ 0.320852@0] hdmitx: alread display in uboot 0x10
  158. [ 0.320878@0] avmute set to 1
  159. [ 0.321189@0] vout_serve: vout_init_module
  160. [ 0.321324@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=16
  161. [ 0.321336@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  162. [ 0.321350@0] tv_vout: already display in uboot
  163. [ 0.321359@0] vout_serve: vinfo mode is: 1080p60hz
  164. [ 0.321368@0] vout_serve: init mode 1080p60hz
  165. [ 0.321451@0] vout_serve: create vout attribute OK
  166. [ 0.321462@0] vout_serve: meson_vout_probe OK
  167. [ 0.321632@0] logo: logo_init
  168. [ 0.321878@0] osd_rdma: osd_rdma_init: rdma_table p=0x26041000,op=0x26041000 , v=0xffffff8000199000
  169. [ 0.321895@0] osd_rdma: osd rdma request irq as second interrput function!
  170. [ 0.322038@0] Advanced Linux Sound Architecture Driver Initialized.
  171. [ 0.324311@0] Switched to clocksource arch_sys_counter
  172. [ 0.327916@0] hdmitx: system: irq 2
  173. [ 0.343706@0] NET: Registered protocol family 2
  174. [ 0.344217@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  175. [ 0.344334@0] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  176. [ 0.344470@0] TCP: Hash tables configured (established 8192 bind 8192)
  177. [ 0.344547@0] TCP: reno registered
  178. [ 0.344561@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  179. [ 0.344591@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  180. [ 0.344785@0] NET: Registered protocol family 1
  181. [ 0.345027@0] RPC: Registered named UNIX socket transport module.
  182. [ 0.345043@0] RPC: Registered udp transport module.
  183. [ 0.345051@0] RPC: Registered tcp transport module.
  184. [ 0.345060@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  185. [ 0.345267@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
  186. [ 0.345281@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output
  187. [ 0.345338@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
  188. [ 0.345351@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  189. [ 0.345365@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
  190. [ 0.345376@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
  191. [ 0.345722@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
  192. [ 0.345766@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
  193. [ 0.345787@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
  194. [ 0.345982@0] Unpacking initramfs...
  195. [ 0.371461@0] Freeing initrd memory: 2824K (ffffffc033bf7000 - ffffffc033eb9000)
  196. [ 0.374290@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  197. [ 0.382850@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  198. [ 0.384417@0] NFS: Registering the id_resolver key type
  199. [ 0.384467@0] Key type id_resolver registered
  200. [ 0.384477@0] Key type id_legacy registered
  201. [ 0.384493@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  202. [ 0.385317@0] msgmni has been set to 1550
  203. [ 0.386334@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  204. [ 0.386362@0] io scheduler noop registered (default)
  205. [ 0.386372@0] io scheduler deadline registered
  206. [ 0.386540@0] io scheduler cfq registered
  207. [ 0.387633@0] meson-rng c8834000.rng: hwrng registered
  208. [ 0.390995@0] loop: module loaded
  209. [ 0.392817@0] tun: Universal TUN/TAP device driver, 1.6
  210. [ 0.392840@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  211. [ 0.393288@0] drivers/amlogic/efuse/efuse_hw64.c:_efuse_read:168: read error!!!
  212. [ 0.393307@0] hwmac: error to read MAC address, use default address
  213. [ 0.396883@0] libphy: stmmac: probed
  214. [ 0.396908@0] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
  215. [ 0.397326@0] PPP generic driver version 2.4.2
  216. [ 0.397569@0] NET: Registered protocol family 24
  217. [ 0.397680@0] usbcore: registered new interface driver smsc95xx
  218. [ 0.398003@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  219. [ 0.398137@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  220. [ 0.398149@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  221. [ 0.398353@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  222. [ 0.398697@0] usbcore: registered new interface driver cdc_acm
  223. [ 0.398713@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  224. [ 0.398811@0] usbcore: registered new interface driver usb-storage
  225. [ 0.399008@0] usbcore: registered new interface driver usbserial
  226. [ 0.399086@0] usbcore: registered new interface driver usbserial_generic
  227. [ 0.399159@0] usbserial: USB Serial support registered for generic
  228. [ 0.399246@0] usbcore: registered new interface driver pl2303
  229. [ 0.399325@0] usbserial: USB Serial support registered for pl2303
  230. [ 0.399884@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001d6000
  231. [ 0.400082@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  232. [ 0.400108@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001d8080
  233. [ 0.400431@0] mousedev: PS/2 mouse device common for all mice
  234. [ 0.400573@0] i2c /dev entries driver
  235. [ 0.401355@0] ledtrig-cpu: registered to indicate activity on CPUs
  236. [ 0.401507@0] hidraw: raw HID events driver (C) Jiri Kosina
  237. [ 0.403510@0] usbcore: registered new interface driver usbhid
  238. [ 0.403534@0] usbhid: USB HID core driver
  239. [ 0.403806@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001da4c0
  240. [ 0.403841@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  241. [ 0.403865@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  242. [ 1.762522@3] console [ttyS0] enabled
  243. [ 1.762666@0] hdmitx: plugin
  244. [ 1.769441@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001dc4c0
  245. [ 1.776853@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  246. [ 1.786086@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  247. [ 1.793979@1] dwc_otg_driver_probe host only, not probe usb_otg!!!
  248. [ 1.800483@1] hdmitx: system: hdmitx_hdcp_init
  249. [ 1.804754@1] ESM HLD: Initializing...
  250. [ 1.808211@1] ESM HLD: Registering device range 'esm'...
  251. [ 1.813478@1] ESM HLD: Device range 'esm' has been registered.
  252. [ 1.819263@1] ESM HLD: Creating class /sys/class/elliptic...
  253. [ 1.824948@1] ESM HLD: The class /sys/class/elliptic has been created.
  254. [ 1.831325@1] ESM HLD: Creating device 'esm'...
  255. [ 1.836130@1] ESM HLD: Device 'esm' has been created.
  256. [ 1.840813@1] ESM HLD: Done initializing the HLD driver.
  257. [ 1.862082@1] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
  258. [ 1.863429@1] secmon has 1 memory regions
  259. [ 1.866813@1] secmon: share in base: 0xffffff80001f0000, share out base: 0xffffff80001f2000
  260. [ 1.875059@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
  261. [ 1.882031@1] secmon: probe done
  262. [ 1.885553@1] storage: storage in base: 0xffffff8001600000
  263. [ 1.890656@1] storage: storage out base: 0xffffff8001680000
  264. [ 1.896185@1] storage: storage block base: 0xffffff8001700000
  265. [ 1.900092@0] hdmitx: edid: check sum valid
  266. [ 1.900093@0] hdmitx: edid: check sum valid
  267. [ 1.900098@0] hdmitx: edid: blk0 raw data
  268. [ 1.900138@0] 00ffffffffffff004c2d7c0a000000002f160103804627780aee91a3544c9926
  269. [ 1.900138@0] 0f5054bdee0081c00101010101010101010101010101662156aa51001e30468f
  270. [ 1.900138@0] 3300ba892100001e011d007251d01e206e285500ba892100001e000000fd0018
  271. [ 1.900138@0] 4b0f4417000a202020202020000000fc0053414d53554e470a202020202001bc
  272. [ 1.900138@0]
  273. [ 1.900138@0]
  274. [ 1.900140@0] hdmitx: edid: blk1 raw data
  275. [ 1.900178@0] 020325f14d841305140312101f20212207162309070783010000e2000f67030c
  276. [ 1.900178@0] 001000b82d011d80d0721c1620102c2580ba892100009e011d8018711c162058
  277. [ 1.900178@0] 2c2500ba892100009e011d00bc52d01e20b8285540ba892100001e8c0ad09020
  278. [ 1.900178@0] 4031200c405500ba89210000188c0ad08a20e02d10103e9600ba89210000184f
  279. [ 1.900178@0]
  280. [ 1.900178@0]
  281. [ 1.900182@0] EDID Parser:
  282. [ 1.984593@1] storage: probe done!
  283. [ 1.984920@0] hdmitx: edid: find IEEEOUT
  284. [ 1.984925@0] hdmitx: update RX hdr info 0
  285. [ 1.986975@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  286. [ 1.986982@0] hdmitx: video: get current mode: 1080p60hz
  287. [ 1.986984@0] hdmitx: update rx hdr info 0
  288. [ 1.987003@0] hdmitx: get ext_name (null)
  289. [ 1.987010@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  290. [ 1.987016@0] hdmtix: set audio
  291. [ 1.987025@0] hdmitx tx_aud_src = 0
  292. [ 1.987037@0] hdmitx: system: irq 80000001
  293. [ 1.987068@0] hdmitx aud_n_para = 6144
  294. [ 1.987086@0] hdmitx set channel status
  295. [ 1.987150@0] Start = 0x10000100 End = 0x100001ff
  296. [ 1.987158@0] [0x10000103]: 0x00000008
  297. [ 1.987161@0] [0x10000104]: 0x00000001
  298. [ 1.987315@0] [0x10000170]: 0x00000010
  299. [ 1.987339@0] [0x10000180]: 0x000000ff
  300. [ 1.987341@0] [0x10000181]: 0x000000ff
  301. [ 1.987344@0] [0x10000182]: 0x00000003
  302. [ 1.987347@0] [0x10000183]: 0x00000007
  303. [ 1.987350@0] [0x10000184]: 0x0000003f
  304. [ 1.987353@0] [0x10000185]: 0x00000002
  305. [ 1.987357@0] [0x10000187]: 0x000000ff
  306. [ 1.987360@0] [0x10000188]: 0x00000003
  307. [ 2.085897@3] aml_sd_emmc_probe: line 3556
  308. [ 2.089293@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  309. [ 2.099115@3] aml_sd_emmc_reg_init 1144
  310. [ 2.102541@3] get property: ocr_avail, value:0x00200080
  311. [ 2.108968@3] get property: f_min, value:300000
  312. [ 2.115086@3] get property: f_max, value:100000000
  313. [ 2.121463@3] get property: max_req_size, value:0x00020000
  314. [ 2.127940@3] get property: pinname, str:emmc
  315. [ 2.133712@3] get property: card_type, value:1
  316. [ 2.139418@3] get property: gpio_dat3, str:
  317. [ 2.144841@3] get property: hw_reset, str:
  318. [ 2.150303@3] emmc:pdata->caps = c0000d47
  319. [ 2.154242@3] emmc:pdata->caps2 = 18060
  320. [ 2.158045@3] storage 1, boot 1
  321. [ 2.161137@3] get_storage_dev return 1
  322. [ 2.204321@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  323. [ 2.204552@3] aml_sd_emmc_probe: line 3556
  324. [ 2.208897@3] aml_sd_emmc_reg_init 1144
  325. [ 2.212439@3] get property: ocr_avail, value:0x00200080
  326. [ 2.218852@3] get property: f_min, value:400000
  327. [ 2.224968@3] get property: f_max, value:100000000
  328. [ 2.231346@3] get property: max_req_size, value:0x00020000
  329. [ 2.237817@3] get property: irq_in, value:3
  330. [ 2.243507@3] get property: irq_out, value:5
  331. [ 2.249212@3] get property: gpio_cd, str:
  332. [ 2.254638@3] get property: pinname, str:sd
  333. [ 2.260240@3] get property: jtag_pin, str:
  334. [ 2.265677@3] get property: card_type, value:5
  335. [ 2.271366@3] get property: gpio_dat3, str:
  336. [ 2.276816@3] sd:pdata->caps = 7
  337. [ 2.279989@3] sd:pdata->caps2 = 0
  338. [ 2.314469@2] [aml_is_card_insert] card IN
  339. [ 2.324374@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  340. [ 2.324603@0] aml_sd_emmc_probe: line 3556
  341. [ 2.343488@3] emmc: BKOPS_EN bit is not set
  342. [ 2.351380@3] emmc: trying cali 0-th time(s)
  343. [ 2.365694@3] emmc: delay[0]= 2200 padding= 4, bidx=2
  344. [ 2.365719@3] emmc: delay[1]= 2400 padding= 3, bidx=2
  345. [ 2.370112@3] emmc: delay[2]= 2200 padding= 4, bidx=2
  346. [ 2.375121@3] emmc: delay[3]= 2400 padding= 3, bidx=2
  347. [ 2.380117@3] emmc: delay[4]= 2600 padding= 2, bidx=2
  348. [ 2.385125@3] emmc: delay[5]= 2200 padding= 4, bidx=2
  349. [ 2.390122@3] emmc: delay[6]= 2400 padding= 3, bidx=2
  350. [ 2.395129@3] emmc: delay[7]= 2400 padding= 3, bidx=2
  351. [ 2.400127@3] emmc: calibration result @ 0: max(2600), min(2200)
  352. [ 2.406084@3] emmc: line_delay =0x11201212, max_cal_result =2600
  353. [ 2.412029@3] emmc: base_index_max 2, base_index_min 2
  354. [ 2.415718@2] normal card in
  355. [ 2.419990@3] emmc: clk 100000000 SDR mode tuning start
  356. [ 2.420108@0] aml_sd_emmc_reg_init 1144
  357. [ 2.420168@0] get property: ocr_avail, value:0x00200080
  358. [ 2.420171@0] get property: f_min, value:400000
  359. [ 2.420173@0] get property: f_max, value:200000000
  360. [ 2.420176@0] get property: max_req_size, value:0x00020000
  361. [ 2.420182@0] get property: pinname, str:sdio
  362. [ 2.420186@0] get property: card_type, value:3
  363. [ 2.420232@0] sdio:pdata->caps = 7810f
  364. [ 2.420234@0] sdio:pdata->caps2 = 0
  365. [ 2.454331@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  366. [ 2.454771@1] ion_dev has 1 memory regions
  367. [ 2.457731@1] fb: osd_init_module
  368. [ 2.457883@1] fb: viu vsync irq: 35
  369. [ 2.457890@1] meson-fb has 1 memory regions
  370. [ 2.457937@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
  371. [ 2.457954@1] fb: osd_probe vinfo:ffffffc001beb560
  372. [ 2.457959@1] fb: init fbdev bpp is:32
  373. [ 2.510329@3] emmc: rx_tuning_result[0] = 10
  374. [ 2.514281@3] emmc: rx_tuning_result[1] = 10
  375. [ 2.515286@0] fb: osd probe OK
  376. [ 2.515567@0] ge2d: ge2d_init_module
  377. [ 2.515582@0] ge2d: ge2d_dev major:244
  378. [ 2.516079@0] ge2d: ge2d clock is 400 MHZ
  379. [ 2.516085@0] ge2d: ge2d: pdev=ffffffc023c8c000, irq=182, rstc=0xffffffc023045f00, clk=ffffffc01037bc00
  380. [ 2.516156@0] ge2d: mapped phy: 0xd0160000
  381. [ 2.516163@0] ge2d: ge2d start monitor
  382. [ 2.516225@2] ge2d: ge2d workqueue monitor start
  383. [ 2.516576@0] codec:Amlogic A/V streaming port init
  384. [ 2.518400@0] codec:get gate demux control ok ffffffc023d15740
  385. [ 2.518406@0] codec:get gate parser_top control ok ffffffc023d157c0
  386. [ 2.518410@0] codec:get gate vpu_intr control ok ffffffc023d15840
  387. [ 2.518416@0] codec:get gate vdec control ok ffffffc023d158c0
  388. [ 2.519109@0] codec:[tsync_pcr_init]init success.
  389. [ 2.519113@0] codec:amvideocap_init_module
  390. [ 2.519263@0] codec:amvideocap_probe,amvideocap
  391. [ 2.519267@0] codec:use cma buf.
  392. [ 2.519269@0] codec:amvideocap_dev_register
  393. [ 2.521667@0] codec:create_ge2d_work_queue video task ok
  394. [ 2.522120@0] codec:used fix clk for vdec clk source!
  395. [ 2.522134@0] codec:register clk_set_setting cpu[33]
  396. [ 2.522484@0] DI: di_module_init ok.
  397. [ 2.522494@0] DI: di_module_init: major 240
  398. [ 2.522931@0] DI: di_probe
  399. [ 2.523200@0] deinterlace has 1 memory regions
  400. [ 2.523243@0] DI: di reveser memory 0x3c200000, size 30MB.
  401. [ 2.523255@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
  402. [ 2.523283@0] di_irq:78,timerc_irq:38
  403. [ 2.523490@0] rdma_register, rdma_table_addr ffffff8000412000 rdma_table_addr_phy 26048000 reg_buf ffffffc0237ee000
  404. [ 2.523492@0] rdma_register success, handle 1 table_size 8192
  405. [ 2.523495@0] DI: di_probe allocate rdma channel 1.
  406. [ 2.523499@0] DI: DI hw version 2.
  407. [ 2.523512@0] 0x000000db:Y=db,U=0,V=0
  408. [ 2.523514@0] 0x000000dc:Y=dc,U=0,V=0
  409. [ 2.523516@0] 0x000000dd:Y=dd,U=0,V=0
  410. [ 2.523518@0] 0x000000de:Y=de,U=0,V=0
  411. [ 2.523520@0] 0x000000df:Y=df,U=0,V=0
  412. [ 2.523521@0] 0x000000e0:Y=e0,U=0,V=0
  413. [ 2.523523@0] 0x000000e1:Y=e1,U=0,V=0
  414. [ 2.523525@0] 0x000000e2:Y=e2,U=0,V=0
  415. [ 2.523527@0] 0x000000e3:Y=e3,U=0,V=0
  416. [ 2.523528@0] 0x000000f0:Y=f0,U=0,V=0
  417. [ 2.523532@0] 0x000000f1:Y=f1,U=0,V=0
  418. [ 2.523534@0] 0x000000f2:Y=f2,U=0,V=0
  419. [ 2.523536@0] 0x000000f3:Y=f3,U=0,V=0
  420. [ 2.523538@0] 0x000000f4:Y=f4,U=0,V=0
  421. [ 2.523539@0] 0x000000f5:Y=f5,U=0,V=0
  422. [ 2.523542@0] 0x000000f6:Y=f6,U=0,V=0
  423. [ 2.523545@0] 0x000000f7:Y=f7,U=0,V=0
  424. [ 2.523546@0] 0x000000f8:Y=f8,U=0,V=0
  425. [ 2.523548@0] 0x000000f9:Y=f9,U=0,V=0
  426. [ 2.523550@0] 0x000000fa:Y=fa,U=0,V=0
  427. [ 2.523552@0] 0x000000fb:Y=fb,U=0,V=0
  428. [ 2.523554@0] 0x000000fc:Y=fc,U=0,V=0
  429. [ 2.523711@0] DI: di_probe here.
  430. [ 2.524140@0] efusekeynum: 4
  431. [ 2.524150@0] efusekeyname: mac offset: 0 size: 6
  432. [ 2.524157@0] efusekeyname: mac_bt offset: 6 size: 6
  433. [ 2.524162@0] efusekeyname: mac_wifi offset: 12 size: 6
  434. [ 2.524168@0] efusekeyname: usid offset: 18 size: 16
  435. [ 2.524627@0] efuse efuse.10: probe OK!
  436. [ 2.525040@0] key unify config unifykey-num is 14
  437. [ 2.525095@0] key unify fact unifykey-num is 14
  438. [ 2.525100@0] aml_unifykeys_probe:1267=============unifykey_devno:ee00000
  439. [ 2.525403@0] 6unifykey: device unifykeys created ok
  440. [ 2.525527@0] 6aml_unifykeys_init done!
  441. [ 2.525531@0] PPMGRDRV: warn: ppmgr module init func called
  442. [ 2.525657@0] PPMGRDRV: err: ppmgr_driver_probe called
  443. [ 2.525661@0] ppmgr has 1 memory regions
  444. [ 2.525708@0] PPMGRDRV: info: ppmgr_dev major:237
  445. [ 2.525991@0] PPMGRDRV: info: ppmgr_probe done
  446. [ 2.526393@0] amlogic rfkill init
  447. [ 2.526477@0] enter bt_probe of_node
  448. [ 2.526498@0] not get gpio_en
  449. [ 2.841993@3] power on valid level is high
  450. [ 2.841993@3] emmc: rx_tuning_result[2] = 10
  451. [ 2.850230@3] emmc: rx_tuning_result[3] = 10
  452. [ 2.854455@3] emmc: rx_tuning_result[4] = 10
  453. [ 2.858674@3] emmc: rx_tuning_result[5] = 10
  454. [ 2.862899@3] emmc: rx_tuning_result[6] = 10
  455. [ 2.867133@3] emmc: rx_tuning_result[7] = 10
  456. [ 2.871351@3] emmc: rx_tuning_result[8] = 10
  457. [ 2.875583@3] emmc: rx_tuning_result[9] = 10
  458. [ 2.879505@3] emmc: best_win_start =0, best_win_size =10
  459. [ 2.884774@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
  460. [ 2.892013@3] emmc: gclock =0x100024a, gdelay=0x11201212, gadjust=0x2000
  461. [ 2.898987@3] emmc: support driver strength type 1
  462. [ 2.903441@3] emmc: try set sd/emmc to DDR mode
  463. [ 2.907888@3] emmc: try set sd/emmc to DDR mode
  464. [ 2.912451@3] emmc: new HS400 MMC card at address 0001
  465. [ 2.917462@1] emmc: clock 100000000, 8-bit-bus-width
  466. [ 2.917462@1]
  467. [ 2.922929@1] mmcblk0: emmc:0001 T22708 7.12 GiB
  468. [ 2.927448@1] mmcblk0boot0: emmc:0001 T22708 partition 1 4.00 MiB
  469. [ 2.933446@1] mmcblk0boot1: emmc:0001 T22708 partition 2 4.00 MiB
  470. [ 2.939492@1] mmcblk0rpmb: emmc:0001 T22708 partition 3 4.00 MiB
  471. [ 2.944651@2] audio_dsp: [dsp]register dsp to char divece(257)
  472. [ 2.945492@2] amaudio: amaudio: driver amaudio succuess!
  473. [ 2.946203@2] [RX]-hdmirx: hdmirx_init.
  474. [ 2.946208@2] ESM HLD: Initializing...
  475. [ 2.946209@2] ESM HLD: Registering device range 'esm_rx'...
  476. [ 2.946218@2] ESM HLD: Device range 'esm_rx' has been registered.
  477. [ 2.946220@2] ESM HLD: Creating class /sys/class/elliptic_rx...
  478. [ 2.946278@2] ESM HLD: The class /sys/class/elliptic_rx has been created.
  479. [ 2.946280@2] ESM HLD: Creating device 'esm_rx'...
  480. [ 2.946448@2] ESM HLD: Device 'esm_rx' has been created.
  481. [ 2.946450@2] ESM HLD: Done initializing the HLD driver.
  482. [ 2.946452@2] module init
  483. [ 2.946609@2]
  484. [ 2.946609@2] VECM probe start
  485. [ 2.946951@2] aml_vecm_probe: ok
  486. [ 2.947333@2] remote: Driver init
  487. [ 2.947400@2] remote: platform_data g_remote_ao_offset=580
  488. [ 2.947403@2] remote: platform_data irq =228
  489. [ 2.947443@2] remote: set drvdata completed
  490. [ 2.947455@2] remote: device_create_file completed
  491. [ 2.947809@2] input: aml_keypad as /devices/meson-remote.12/input/input0
  492. [ 2.948171@2] remote: input_register_device completed
  493. [ 2.948255@2] remote: set_remote_mode[74]
  494. [ 2.948289@2] remote: remote config major:234
  495. [ 2.948513@2] remote: physical address:0x23194000
  496. [ 2.949005@2] gpio-key gpio_keypad.48: gpio_key: 0 name(power) pin()
  497. [ 2.949011@2] gpio-key gpio_keypad.48: amlogic_gpio_name_map_num pin 0!::
  498. [ 2.949033@2] gpio-key gpio_keypad.48: gpio_key: 0 power(147)
  499. [ 2.949077@2] gpio-key gpio_keypad.48: start setup_timer
  500. [ 2.949086@2] gpio-key gpio_keypad.48: power key(116) registed.
  501. [ 2.949307@2] input: gpio_keypad as /devices/gpio_keypad.48/input/input1
  502. [ 2.949519@2] gpio-key gpio_keypad.48: gpio keypad register input device completed.
  503. [ 2.949529@2] input input1: gpio keypad major:233
  504. [ 2.949944@2] cpuinfo: probe done
  505. [ 2.950894@2] input: cec_input as /devices/virtual/input/input2
  506. [ 2.951271@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  507. [ 2.951275@2] cectx aocec: aml_cec_probe(): no hhi reg resource
  508. [ 2.951404@2] cectx aocec: aml_cec_probe(): can't find hdmirx
  509. [ 2.952541@2] cec: wake up flag:0
  510. [ 2.953113@2] aml_aes_dma c883e000.aml_aes: Aml AES_dma
  511. [ 2.953662@2] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
  512. [ 2.954273@2] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma
  513. [ 2.958632@2] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  514. [ 2.958652@2] aml_spdif_dai: set normal 512 fs /4 fs
  515. [ 2.958659@2] aml_audio_hw: IEC958 16bit
  516. [ 2.958664@2] hdmitx: audio: aout notify rate 48000
  517. [ 2.958667@2] hdmitx: audio: aout notify size 16
  518. [ 2.958669@2] hdmitx: audio: aout notify format CT_PCM
  519. [ 2.958673@2] hdmtix: set audio
  520. [ 2.958688@2] hdmitx tx_aud_src = 0
  521. [ 2.958713@2] hdmitx aud_n_para = 6144
  522. [ 2.958731@2] hdmitx set channel status
  523. [ 2.958791@2] hdmitx: audio: Audio Type: PCM
  524. [ 2.958794@2] hdmitx: audio: set audio param
  525. [ 2.959831@2] aml_snd_card: headphone detection disable=1
  526. [ 3.214911@2] input input1: key 116 up
  527. [ 3.215528@0] aml_snd_m8_card aml_m8_snd.47: dummy <-> I2S.39 mapping ok
  528. [ 3.215958@0] aml_snd_m8_card aml_m8_snd.47: dit-hifi <-> SPDIF.40 mapping ok
  529. [ 3.216071@0] aml_snd_m8_card aml_m8_snd.47: pcm2bt-pcm <-> PCM.41 mapping ok
  530. [ 3.240377@2] mmcblk0: unknown partition table
  531. [ 3.244524@2] [mmc_read_partition_tbl] mmc read partition OK!
  532. [ 3.249520@2] add_emmc_partition
  533. [ 3.252976@2] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  534. [ 3.261311@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  535. [ 3.269663@2] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  536. [ 3.278015@2] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  537. [ 3.286406@2] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  538. [ 3.294749@2] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  539. [ 3.303079@2] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  540. [ 3.311464@2] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  541. [ 3.319836@2] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  542. [ 3.328226@2] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  543. [ 3.336561@2] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
  544. [ 3.344933@2] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
  545. [ 3.353264@2] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
  546. [ 3.369233@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
  547. [ 3.380952@2] [mmcblk0p14] data offset 0x000097c00000, size 0x000130400000
  548. [ 3.381625@3] TCP: cubic registered
  549. [ 3.382366@3] NET: Registered protocol family 10
  550. [ 3.383343@3] NET: Registered protocol family 17
  551. [ 3.383417@3] Key type dns_resolver registered
  552. [ 3.384995@3] Registering SWP/SWPB emulation handler
  553. [ 3.411045@2] card key: card_blk_probe.
  554. [ 3.412184@3] regulator-dummy: disabling
  555. [ 3.418704@2] emmc_key_init:524 emmc key lba_start:0x12020,lba_end:0x12220
  556. [ 3.425479@2] emmc key: emmc_key_init:549 ok.
  557. [ 3.429781@2] amlmmc_dtb_init: register dtb chardev
  558. [ 3.444635@2] amlmmc_dtb_init: register dtb chardev OK<6>[ 3.444741@2] Exit aml_emmc_partition_ops OK.
  559. [ 4.120165@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  560. [ 4.120219@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  561. [ 4.128445@2] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  562. [ 4.130038@3] mmcblk0boot1: unknown partition table
  563. [ 4.132283@3] mmcblk0boot0: unknown partition table
  564. [ 4.132648@3] clear_emmc_wait_flag
  565. [ 4.147319@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  566. [ 4.154092@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  567. [ 4.161438@2] usb usb1: Product: xHCI Host Controller
  568. [ 4.166433@2] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  569. [ 4.172031@2] usb usb1: SerialNumber: xhci-hcd.0.auto
  570. [ 4.177634@3] hub 1-0:1.0: USB hub found
  571. [ 4.180934@3] hub 1-0:1.0: 2 ports detected
  572. [ 4.185397@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  573. [ 4.190765@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  574. [ 4.198556@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  575. [ 4.205338@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  576. [ 4.212655@3] usb usb2: Product: xHCI Host Controller
  577. [ 4.217666@3] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  578. [ 4.223264@3] usb usb2: SerialNumber: xhci-hcd.0.auto
  579. [ 4.229018@3] hub 2-0:1.0: USB hub found
  580. [ 4.232231@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  581. [ 4.240194@3] console [netcon0] enabled
  582. [ 4.243189@3] netconsole: network logging started
  583. [ 4.248031@3] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:07 UTC (1420070407)
  584. [ 4.257156@3] cpufreq-scpi cpufreq-meson.7: enter cpufreq
  585. [ 4.261682@3] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
  586. [ 4.268186@3] gxbb_pm: enter meson_pm_probe!
  587. [ 4.271785@3] gxbb_pm: meson_pm_probe done
  588. [ 4.276131@3] aml_istbt_dev_ready NULL
  589. [ 4.279442@3] ALSA device list:
  590. [ 4.282516@3] #0: AML-M8AUDIO
  591. [ 4.285927@3] sd: new high speed SDHC card at address 1199
  592. [ 4.291055@1] sd: clock 50000000, 4-bit-bus-width
  593. [ 4.291055@1]
  594. [ 4.296310@1] Freeing unused kernel memory: 872K (ffffffc001aa1000 - ffffffc001b7b000)
  595. [ 4.303930@3] mmcblk1: sd:1199 SD04G 3.69 GiB
  596. [ 4.309578@3] mmcblk1: p1 p2
  597. [ 4.335079@2] fb: Frame buffer memory assigned at
  598. [ 4.335096@2] fb: 0, phy: 0x000000003e000000, vir:0xffffff8001b00000, size=24576K
  599. [ 4.335096@2]
  600. [ 4.335106@2] fb: ---------------clear fb0 memory ffffff8001b00000
  601. [ 4.346513@2] fb: osd[0] canvas.idx =0x40
  602. [ 4.346518@2] fb: osd[0] canvas.addr=0x3e000000
  603. [ 4.346522@2] fb: osd[0] canvas.width=7680
  604. [ 4.346525@2] fb: osd[0] canvas.height=3240
  605. [ 4.346529@2] fb: osd[0] frame.width=1920
  606. [ 4.346532@2] fb: osd[0] frame.height=1080
  607. [ 4.348653@2] fb: osd[0] canvas.idx =0x40
  608. [ 4.348655@2] fb: osd[0] canvas.addr=0x3e000000
  609. [ 4.348656@2] fb: osd[0] canvas.width=7680
  610. [ 4.348657@2] fb: osd[0] canvas.height=2160
  611. [ 4.348659@2] fb: osd[0] frame.width=1920
  612. [ 4.348660@2] fb: osd[0] frame.height=1080
  613. [ 4.367048@2] fb: Frame buffer memory assigned at
  614. [ 4.367065@2] fb: 1, phy: 0x000000003f800000, vir:0xffffff8003380000, size=1024K
  615. [ 4.367065@2]
  616. [ 4.367074@2] fb: fb1 open, logo index:1
  617. [ 4.398945@0] vfm_map_store:rm default
  618. [ 4.398945@0]
  619. [ 4.399008@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  620. [ 4.399008@0]
  621. [ 4.399116@0] fb: osd[0] enable: 1 (platform_init)
  622. [ 4.465316@0] Console: switching to colour frame buffer device 240x67
  623. [ 4.493587@0] aml_nftl_dev: module license 'Proprietary' taints kernel.
  624. [ 4.493602@0] Disabling lock debugging due to kernel taint
  625. [ 4.504413@3] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  626. [ 4.645601@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  627. [ 4.645616@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  628. [ 4.645623@3] usb 1-1: Product: USB2.0 Hub
  629. [ 4.646996@3] hub 1-1:1.0: USB hub found
  630. [ 4.647284@3] hub 1-1:1.0: 4 ports detected
  631. [ 4.924676@0] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  632. [ 5.027559@0] usb 1-1.1: New USB device found, idVendor=1915, idProduct=af11
  633. [ 5.027574@0] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  634. [ 5.027581@0] usb 1-1.1: Product: Wireless Receiver
  635. [ 5.027588@0] usb 1-1.1: Manufacturer: 2.4G
  636. [ 5.028420@3] usb 1-1.1: ep 0x81 - rounding interval to 32 microframes, ep desc says 40 microframes
  637. [ 5.028633@3] usb 1-1.1: ep 0x3 - rounding interval to 32 microframes, ep desc says 40 microframes
  638. [ 5.033656@3] input: 2.4G Wireless Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:1915:AF11.0001/input/input3
  639. [ 5.034101@3] hid-generic 0003:1915:AF11.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Receiver ] on usb-xhci-hcd.0.auto-1.1/input0
  640. [ 5.038079@0] input: 2.4G Wireless Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:1915:AF11.0002/input/input4
  641. [ 5.038680@3] hid-generic 0003:1915:AF11.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Receiver ] on usb-xhci-hcd.0.auto-1.1/input1
  642. [ 5.041390@3] hid-generic 0003:1915:AF11.0003: hiddev0,hidraw2: USB HID v1.11 Device [2.4G Wireless Receiver ] on usb-xhci-hcd.0.auto-1.1/input2
  643. [ 13.144060@3] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  644. [ 13.144544@3] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
  645. [ 13.160384@1] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  646. [ 13.396362@3] systemd[1]: System time before build time, advancing clock.
  647. [ 13.399264@3] random: systemd urandom read with 97 bits of entropy available
  648. [ 13.405824@3] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  649. [ 13.406270@3] systemd[1]: Detected architecture arm64.
  650. [ 13.406755@3] systemd[1]: Set hostname to <LibreELEC>.
  651. [ 13.466309@3] systemd[1]: Listening on udev Kernel Socket.
  652. [ 13.466713@3] systemd[1]: Listening on udev Control Socket.
  653. [ 13.466855@3] systemd[1]: Listening on Journal Socket.
  654. [ 13.467017@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  655. [ 13.467132@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  656. [ 13.467170@3] systemd[1]: Reached target Paths.
  657. [ 13.467274@3] systemd[1]: Listening on Journal Socket (/dev/log).
  658. [ 13.467575@3] systemd[1]: Created slice System Slice.
  659. [ 13.468716@3] systemd[1]: Starting Setup machine-id...
  660. [ 13.470082@3] systemd[1]: Mounting Variable Directory...
  661. [ 13.475353@3] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  662. [ 13.476918@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  663. [ 13.476986@3] systemd[1]: Starting Debug Shell on /dev/ttyS0...
  664. [ 13.478633@3] systemd[1]: Mounting Temporary Directory...
  665. [ 13.480120@3] systemd[1]: Starting Mounting swapfile...
  666. [ 13.481615@3] systemd[1]: Starting Remount Root and Kernel File Systems...
  667. [ 13.482032@3] systemd[1]: Created slice User and Session Slice.
  668. [ 13.483658@3] systemd[1]: Mounting Debug File System...
  669. [ 13.485142@3] systemd[1]: Mounting POSIX Message Queue File System...
  670. [ 13.497114@3] systemd[1]: Starting Load Kernel Modules...
  671. [ 13.498875@3] systemd[1]: Starting Show Version...
  672. [ 13.499277@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  673. [ 13.499385@3] systemd[1]: Reached target Slices.
  674. [ 13.506458@3] systemd[1]: Started Remount Root and Kernel File Systems.
  675. [ 13.514784@3] systemd[1]: Starting udev Coldplug all Devices...
  676. [ 13.549305@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
  677. [ 13.550961@2] systemd[1]: Starting Create Static Device Nodes in /dev...
  678. [ 13.600915@0] systemd[1]: Mounted Debug File System.
  679. [ 13.601209@0] systemd[1]: Mounted POSIX Message Queue File System.
  680. [ 13.601351@0] systemd[1]: Mounted Variable Directory.
  681. [ 13.601437@0] systemd[1]: Mounted Temporary Directory.
  682. [ 13.605266@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  683. [ 13.605697@0] systemd[1]: Started Debug Shell on /dev/ttyS0.
  684. [ 13.606978@0] systemd[1]: Started Setup machine-id.
  685. [ 13.617670@0] systemd[1]: Started Show Version.
  686. [ 13.679682@3] systemd[1]: Starting Journal Service...
  687. [ 13.681375@3] systemd[1]: Starting Setup Timezone data...
  688. [ 13.698868@3] systemd[1]: Started Setup Timezone data.
  689. [ 13.790085@3] systemd[1]: Started udev Coldplug all Devices.
  690. [ 13.865755@3] systemd[1]: Started Create Static Device Nodes in /dev.
  691. [ 13.866266@3] systemd[1]: Reached target Local File Systems (Pre).
  692. [ 13.866528@3] systemd[1]: Reached target Local File Systems.
  693. [ 13.904503@0] mali-utgard d00c0000.mali: set min pp to default 1
  694. [ 13.904519@0] mali-utgard d00c0000.mali: set min clk default to 0
  695. [ 13.904632@0] mali-utgard d00c0000.mali: max clk set 5
  696. [ 13.904638@0] mali-utgard d00c0000.mali: turbo clk set to 6
  697. [ 13.907355@1] Mali: Mali device driver loaded
  698. [ 13.909022@2] systemd[1]: Started Load Kernel Modules.
  699. [ 13.911449@2] systemd[1]: Starting Apply Kernel Variables...
  700. [ 13.913422@2] systemd[1]: Mounting Configuration File System...
  701. [ 13.919847@2] systemd[1]: Mounted Configuration File System.
  702. [ 13.921844@2] systemd[1]: Started Mounting swapfile.
  703. [ 13.937437@2] systemd[1]: Started Apply Kernel Variables.
  704. [ 13.956823@2] systemd[1]: Started Journal Service.
  705. [ 13.992543@1] systemd-journald[2119]: Received request to flush runtime journal from PID 1
  706. [ 14.273972@1] random: nonblocking pool is initialized
  707. [ 15.037626@2] Console: switching to colour dummy device 80x25
  708. [ 15.226303@0] remote: cur_mode = 0
  709. [ 15.226324@0] remote: set_remote_mode[74]
  710. [ 15.282488@0] Triggered SDIO WiFi power on and bus rescan.
  711. [ 15.282524@0] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
  712. [ 15.584385@0] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
  713. [ 15.917580@2] sdio: new high speed SDIO card at address 0001
  714. [ 15.917593@0] sdio: clock 50000000, 4-bit-bus-width
  715. [ 15.917593@0]
  716. [ 15.919269@0] [sdio_reinit] finish
  717. [ 16.950743@3] cfg80211: Calling CRDA to update world regulatory domain
  718. [ 17.010076@3] RTL871X: module init start
  719. [ 17.010095@3] RTL871X: rtl8189es v4.3.18.2_17395.20160422
  720. [ 17.010100@3] ######platform_wifi_power_on:
  721. [ 17.010127@3] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Disable! 240
  722. [ 17.345657@2] 8021q: 802.1Q VLAN Support v1.8
  723. [ 17.514413@3] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI Enable! 240
  724. [ 18.024385@3] sdio_reset_comm():
  725. [ 18.044089@2] [sdio_reinit] finish
  726. [ 18.046662@2] bFWReady == _FALSE call reset 8051...
  727. [ 18.069005@1] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=5c:ff:ff:5f:31:d0
  728. [ 18.072741@1] RTL871X: module init ret=0
  729. [ 18.277287@1] aml_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
  730. [ 18.277350@1] aml_spdif_dai: share the same clock
  731. [ 18.277359@1] aml_audio_hw: IEC958 16bit
  732. [ 18.277366@1] hdmitx: audio: aout notify rate 48000
  733. [ 18.277370@1] hdmitx: audio: aout notify size 16
  734. [ 18.277374@1] hdmitx: audio: no update
  735. [ 18.298427@1] aml_spdif_dai: share the same clock
  736. [ 18.298446@1] aml_audio_hw: IEC958 16bit
  737. [ 18.298452@1] hdmitx: audio: aout notify rate 48000
  738. [ 18.298456@1] hdmitx: audio: aout notify size 16
  739. [ 18.298460@1] hdmitx: audio: no update
  740. [ 18.300261@1] aml_spdif_dai: share the same clock
  741. [ 18.300281@1] aml_audio_hw: IEC958 16bit
  742. [ 18.300288@1] hdmitx: audio: aout notify rate 48000
  743. [ 18.300292@1] hdmitx: audio: aout notify size 16
  744. [ 18.300296@1] hdmitx: audio: no update
  745. [ 18.301381@1] aml_spdif_dai: share the same clock
  746. [ 18.301401@1] aml_audio_hw: IEC958 16bit
  747. [ 18.301408@1] hdmitx: audio: aout notify rate 48000
  748. [ 18.301412@1] hdmitx: audio: aout notify size 16
  749. [ 18.301416@1] hdmitx: audio: no update
  750. [ 18.302535@1] aml_spdif_dai: share the same clock
  751. [ 18.302555@1] aml_audio_hw: IEC958 16bit
  752. [ 18.302562@1] hdmitx: audio: aout notify rate 48000
  753. [ 18.302567@1] hdmitx: audio: aout notify size 16
  754. [ 18.302571@1] hdmitx: audio: no update
  755. [ 18.417810@2] audio_dsp: buf=0
  756. [ 18.417827@2] audio_dsp: IEC958_mode_raw=0
  757. [ 18.417862@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  758. [ 18.417867@2] audio_dsp: last mode 0,now 0
  759. [ 18.423187@1] aml_spdif_dai: share the same clock
  760. [ 18.423208@1] aml_audio_hw: IEC958 16bit
  761. [ 18.423215@1] hdmitx: audio: aout notify rate 48000
  762. [ 18.423219@1] hdmitx: audio: aout notify size 16
  763. [ 18.423223@1] hdmitx: audio: no update
  764. [ 18.424628@2] ==> rtl8188e_iol_efuse_patch
  765. [ 18.425343@1] aml_spdif_dai: share the same clock
  766. [ 18.425364@1] aml_audio_hw: IEC958 16bit
  767. [ 18.425372@1] hdmitx: audio: aout notify rate 48000
  768. [ 18.425376@1] hdmitx: audio: aout notify size 16
  769. [ 18.425380@1] hdmitx: audio: no update
  770. [ 18.427454@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
  771. [ 18.427467@1] aml_spdif_dai: share the same clock
  772. [ 18.427473@1] aml_spdif_dai: iec958 mode PCM32
  773. [ 18.427482@1] aml_audio_hw: IEC958 PCM32
  774. [ 18.427489@1] hdmitx: audio: aout notify rate 44100
  775. [ 18.427493@1] hdmitx: audio: aout notify size 32
  776. [ 18.427499@1] hdmtix: set audio
  777. [ 18.427514@1] hdmitx tx_aud_src = 0
  778. [ 18.427541@1] hdmitx aud_n_para = 6144
  779. [ 18.427561@1] hdmitx set channel status
  780. [ 18.427622@1] hdmitx: audio: Audio Type: PCM
  781. [ 18.427628@1] hdmitx: audio: set audio param
  782. [ 18.427640@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
  783. [ 18.427751@1] aml_snd_card: audio speaker on
  784. [ 18.534608@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
  785. [ 18.534619@1] aml_spdif_dai: share the same clock
  786. [ 18.534625@1] aml_spdif_dai: iec958 mode PCM32
  787. [ 18.534633@1] aml_audio_hw: IEC958 PCM32
  788. [ 18.534640@1] hdmitx: audio: aout notify rate 44100
  789. [ 18.534644@1] hdmitx: audio: aout notify size 32
  790. [ 18.534648@1] hdmitx: audio: no update
  791. [ 18.534659@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
  792. [ 18.540912@1] aml_snd_m8_card aml_m8_snd.47: I2S playback enable
  793. [ 18.540930@1] aml_snd_m8_card aml_m8_snd.47: IEC958 playback enable
  794. [ 18.692037@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  795. [ 18.851393@0] fb: osd[0] enable: 1 (kodi.bin)
  796. [ 20.059116@1] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
  797. [ 20.135249@1] RTL871X: start auth
  798. [ 20.137525@1] RTL871X: auth success, start assoc
  799. [ 20.140915@1] RTL871X: assoc success
  800. [ 20.141024@1] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  801. [ 20.154556@1] RTL871X: recv eapol packet
  802. [ 20.156130@1] RTL871X: send eapol packet
  803. [ 20.172192@1] RTL871X: recv eapol packet
  804. [ 20.172560@1] RTL871X: send eapol packet
  805. [ 20.172829@1] RTL871X: set pairwise key camid:4, addr:06:d9:54:36:ad:71, kid:0, type:AES
  806. [ 20.175242@1] RTL871X: set group key camid:5, addr:06:d9:54:36:ad:71, kid:1, type:AES
  807. [ 22.095206@0] remote: Wrong custom code is 0xbb441dcc
  808. [ 22.435852@0] remote: Wrong custom code is 0xbb441dcc
  809. [ 22.891726@0] remote: Wrong custom code is 0xed121dcc
  810. [ 23.183017@0] remote: Wrong custom code is 0xed121dcc
  811. [ 23.441370@0] remote: Wrong custom code is 0xed121dcc
  812. [ 23.732678@0] remote: Wrong custom code is 0xed121dcc
  813. [ 24.353422@0] remote: Wrong custom code is 0xbb441dcc
  814. [ 24.776436@0] remote: Wrong custom code is 0xee111dcc
  815. [ 25.314884@0] remote: Wrong custom code is 0xf8071dcc
  816. [ 25.589716@0] remote: Wrong custom code is 0xed121dcc
  817. [ 25.864584@0] remote: Wrong custom code is 0xbb441dcc
  818. [ 26.129860@0] remote: Wrong custom code is 0xed121dcc
  819. [ 41.724440@0] remote: Wrong custom code is 0xed121dcc
  820. [ 42.196888@0] remote: Wrong custom code is 0xee111dcc
  821. [ 42.603484@0] remote: Wrong custom code is 0xee111dcc
  822. [ 42.711950@0] remote: Wrong custom code is 0xed121dcc
  823. [ 42.928873@0] remote: Wrong custom code is 0xee111dcc
  824. [ 43.252138@0] remote: Wrong custom code is 0xed121dcc
  825. [ 43.625909@0] remote: Wrong custom code is 0xee111dcc
  826. [ 43.734506@0] remote: Wrong custom code is 0xed121dcc
  827. [ 44.346275@0] remote: Wrong custom code is 0xf8071dcc
  828. [ 44.563229@0] remote: Wrong custom code is 0xee111dcc
  829. [ 45.273577@0] remote: Wrong custom code is 0xed121dcc
  830. [ 46.158218@0] remote: Wrong custom code is 0xbb441dcc
  831. [ 46.482506@0] remote: Wrong custom code is 0xee111dcc
  832. [ 46.823313@0] remote: Wrong custom code is 0xee111dcc
  833. [ 47.237086@0] remote: Wrong custom code is 0xf8071dcc
  834. [ 48.039559@0] remote: Wrong custom code is 0xbb441dcc
  835. [ 84.982915@0] remote: Wrong custom code is 0xed121dcc
  836. [ 111.791925@0] aml_snd_m8_card aml_m8_snd.47: I2S playback disable
  837. [ 111.791979@0] aml_snd_m8_card aml_m8_snd.47: IEC958 playback disable
  838. [ 111.792107@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
  839. [ 111.792127@0] aml_spdif_dai: share the same clock
  840. [ 111.792149@0] aml_spdif_dai: iec958 mode PCM32
  841. [ 111.792176@0] aml_audio_hw: IEC958 PCM32
  842. [ 111.792202@0] hdmitx: audio: aout notify rate 44100
  843. [ 111.792220@0] hdmitx: audio: aout notify size 32
  844. [ 111.792237@0] hdmitx: audio: no update
  845. [ 111.792265@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
  846. [ 121.793565@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
  847. [ 121.793659@0] aml_spdif_dai: share the same clock
  848. [ 121.793731@0] aml_audio_hw: IEC958 16bit
  849. [ 121.793790@0] hdmitx: audio: aout notify rate 48000
  850. [ 121.793837@0] hdmitx: audio: aout notify size 16
  851. [ 121.793970@0] hdmtix: set audio
  852. [ 121.794080@0] hdmitx tx_aud_src = 0
  853. [ 121.794284@0] hdmitx aud_n_para = 6144
  854. [ 121.794652@0] hdmitx set channel status
  855. [ 121.795069@0] hdmitx: audio: Audio Type: PCM
  856. [ 121.795114@0] hdmitx: audio: set audio param
  857. [ 126.805079@0] aml_snd_card: audio speaker off
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!