API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 18th, 2017
243
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.16 KB | None | 0 0
raw download clone embed print report
  1. BootROM - 2.03
  2. Starting CP-1 IOROM 1.07
  3. Booting from SPI NOR flash 1 (0x32)
  4. Found valid image at boot postion 0x000
  5. lNOTICE: Starting binary extension
  6. NOTICE: Gathering DRAM information
  7. mv_ddr: mv_ddr-devel-17.06.0-ga55312d (May 18 2017 - 16:50:38)
  8. mv_ddr: completed successfully
  9. NOTICE: Booting Trusted Firmware
  10. NOTICE: BL1: v1.3(release):devel-17.06.0:66befb5
  11. NOTICE: BL1: Built : 16:50:43, May 18 2017
  12. NOTICE: BL1: Booting BL2
  13. lNOTICE: BL2: v1.3(release):devel-17.06.0:66befb5
  14. NOTICE: BL2: Built : 16:50:44, May 18 2017
  15. NOTICE: BL1: Booting BL31
  16. lNOTICE: BL31: v1.3(release):devel-17.06.0:66befb5
  17. NOTICE: BL31: Built : 16:50:46, May 18 2017
  18. lUEFI firmware (version MARVELL_EFI built at 16:39:10 on May 18 2017)
  19.  
  20. Armada 8040 MachiatoBin Platform Init
  21.  
  22. Comphy0-0: PCIE0 5 Gbps
  23. Comphy0-1: PCIE0 5 Gbps
  24. Comphy0-2: PCIE0 5 Gbps
  25. Comphy0-3: PCIE0 5 Gbps
  26. Comphy0-4: SFI 10.31 Gbps
  27. Comphy0-5: SATA1 5 Gbps
  28.  
  29. Comphy1-0: SGMII1 1.25 Gbps
  30. Comphy1-1: SATA2 5 Gbps
  31. Comphy1-2: USB3_HOST0 5 Gbps
  32. Comphy1-3: SATA3 5 Gbps
  33. Comphy1-4: SFI 10.31 Gbps
  34. Comphy1-5: SGMII2 3.125 Gbps
  35.  
  36. UTMI PHY 0 initialized to USB Host0
  37. UTMI PHY 1 initialized to USB Host1
  38. UTMI PHY 0 initialized to USB Host0
  39. RTC: Initialize controller 1
  40. Skip I2c chip 0
  41. Succesfully installed protocol interfaces
  42. ramdisk:blckio install. Status=Success
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66. Press ESCAPE for boot options .....
  67.  
  68.  
  69.  
  70.  
  71.  
  72.  
  73.  
  74.  
  75.  
  76.  
  77.  
  78.  
  79.  
  80.  
  81.  
  82.  
  83.  
  84.  
  85.  
  86.  
  87.  
  88.  
  89.  
  90. GNU GRUB version 2.02~beta2-29ubuntu0.3~u14.04+mos1
  91.  
  92. /----------------------------------------------------------------------------\
  93. |*ubuntu_bootstrap |
  94. | |
  95. | |
  96. | |
  97. | |
  98. | |
  99. | |
  100. | |
  101. | |
  102. | |
  103. | |
  104. | |
  105. | |
  106. \----------------------------------------------------------------------------/
  107.  
  108. Use the ^ and v keys to select which entry is highlighted.
  109. Press enter to boot the selected OS, `e' to edit the commands
  110. before booting or `c' for a command-line.
  111.  
  112.  
  113. Network status:
  114. efinet3 00:00:00:00:00:04
  115. efinet2 00:00:00:00:00:03
  116. efinet1 00:00:00:00:00:02
  117. efinet0 00:00:00:00:00:01
  118. efinet2 00:00:00:00:00:03 10.20.0.5
  119. efinet2:local 10.20.0.0/24 efinet2
  120. efinet2:default 0.0.0.0/0 gw 10.20.0.2
  121. Loading Linux ...
  122. Loading initial ramdisk ...
  123. Booting bootstrap image ...
  124. EFI stub: Booting Linux Kernel...
  125. EFI stub: Using DTB from configuration table
  126. EFI stub: Exiting boot services and installing virtual address map...
  127. [ 0.000000] Booting Linux on physical CPU 0x0
  128. [ 0.000000] Initializing cgroup subsys cpuset
  129. [ 0.000000] Initializing cgroup subsys cpu
  130. [ 0.000000] Initializing cgroup subsys cpuacct
  131. [ 0.000000] Linux version 4.4.0-9977-generic (armband@cn8890-4) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #98+amos1~u16.04~mcbin SMP Thu May 18 00:49:46 CEST 2017 (Ubuntu 4.4.0-9977.98+amos1~u16.04~mcbin-generic 4.4.59)
  132. [ 0.000000] Boot CPU: AArch64 Processor [410fd081]
  133. [ 0.000000] Ignoring memory range 0x0 - 0x400000
  134. [ 0.000000] efi: Getting EFI parameters from FDT:
  135. [ 0.000000] EFI v2.60 by EDK II
  136. [ 0.000000] efi: ACPI 2.0=0xde760000
  137. [ 0.000000] No NUMA configuration found
  138. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000efffffff]
  139. [ 0.000000] NUMA: Adding memblock [0x400000 - 0xefffffff] on node 0
  140. [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00400000-0xefffffff]
  141. [ 0.000000] NUMA: NODE_DATA [mem 0xeffe7280-0xeffe8fff]
  142. [ 0.000000] Zone ranges:
  143. [ 0.000000] DMA [mem 0x0000000000400000-0x00000000efffffff]
  144. [ 0.000000] Normal empty
  145. [ 0.000000] Movable zone start for each node
  146. [ 0.000000] Early memory node ranges
  147. [ 0.000000] node 0: [mem 0x0000000000400000-0x00000000efffffff]
  148. [ 0.000000] Initmem setup node 0 [mem 0x0000000000400000-0x00000000efffffff]
  149. [ 0.000000] psci: probing for conduit method from DT.
  150. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  151. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  152. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  153. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffff8000efb87000 s31256 r8192 d30184 u69632
  154. [ 0.000000] Detected PIPT I-cache on CPU0
  155. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966672
  156. [ 0.000000] Policy zone: DMA
  157. [ 0.000000] Kernel command line: BOOT_IMAGE=(tftp)/images/ubuntu_bootstrap/vmlinuz ksdevice=bootif lang= console=ttyAMA0,115200 console=ttyS0,115200 toram locale=en_US text fetch=http://10.20.0.2:8080/bootstraps/active_bootstrap/root.squashfs boot=live mco_user=mcollective priority=critical url=http://10.20.0.2:8000/api biosdevname=0 components ip=frommedia ethdevice-timeout=120 net.ifnames=1 panic=60 mco_pass=9I8uajQ4fAthnos0Ll6DwdbL auto-install/enable=true priority=critical url=http://10.20.0.2/cblr/svc/op/ks/profile/ubuntu_bootstrap hostname=ubuntubootstrap domain=local.lan suite=xenial BOOTIF=01-00-00-00-00-00-03
  158. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  159. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  160. [ 0.000000] log_buf_len min size: 16384 bytes
  161. [ 0.000000] log_buf_len: 32768 bytes
  162. [ 0.000000] early log buf free: 13340(81%)
  163. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  164. [ 0.000000] software IO TLB [mem 0xe3810000-0xe7810000] (64MB) mapped at [ffff8000e3410000-ffff8000e740ffff]
  165. [ 0.000000] Memory: 3750152K/3928064K available (9188K kernel code, 1081K rwdata, 4064K rodata, 784K init, 791K bss, 177912K reserved, 0K cma-reserved)
  166. [ 0.000000] Virtual kernel memory layout:
  167. [ 0.000000] vmalloc : 0xffff000000000000 - 0xffff7bffbfff0000 (126974 GB)
  168. [ 0.000000] vmemmap : 0xffff7bffc0000000 - 0xffff7fffc0000000 ( 4096 GB maximum)
  169. [ 0.000000] 0xffff7bffc0010000 - 0xffff7bffc3c00000 ( 59 MB actual)
  170. [ 0.000000] fixed : 0xffff7ffffa7fd000 - 0xffff7ffffac00000 ( 4108 KB)
  171. [ 0.000000] PCI I/O : 0xffff7ffffae00000 - 0xffff7ffffbe00000 ( 16 MB)
  172. [ 0.000000] modules : 0xffff7ffffc000000 - 0xffff800000000000 ( 64 MB)
  173. [ 0.000000] memory : 0xffff800000000000 - 0xffff8000efc00000 ( 3836 MB)
  174. [ 0.000000] .init : 0xffff800000d73000 - 0xffff800000e37000 ( 784 KB)
  175. [ 0.000000] .text : 0xffff800000080000 - 0xffff800000d73000 ( 13260 KB)
  176. [ 0.000000] .data : 0xffff800000e4c000 - 0xffff800000f5a400 ( 1081 KB)
  177. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  178. [ 0.000000] Hierarchical RCU implementation.
  179. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  180. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
  181. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  182. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  183. [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
  184. [ 0.000000] GIC: Using split EOI/Deactivate mode
  185. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
  186. [ 0.000000] GICv2m: range[0xf0280000:0xf0280fff], SPI[160:192]
  187. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
  188. [ 0.000000] GICv2m: range[0xf0290000:0xf0290fff], SPI[192:224]
  189. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
  190. [ 0.000000] GICv2m: range[0xf02a0000:0xf02a0fff], SPI[224:256]
  191. [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
  192. [ 0.000000] GICv2m: range[0xf02b0000:0xf02b0fff], SPI[256:288]
  193. [ 0.000000] Architected cp15 timer(s) running at 25.00MHz (phys).
  194. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  195. [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  196. [ 0.000108] Console: colour dummy device 80x25
  197. [ 0.000139] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  198. [ 0.000146] pid_max: default: 32768 minimum: 301
  199. [ 0.000181] Security Framework initialized
  200. [ 0.000185] Yama: becoming mindful.
  201. [ 0.000218] AppArmor: AppArmor initialized
  202. [ 0.000963] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  203. [ 0.002526] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  204. [ 0.003022] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  205. [ 0.003036] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  206. [ 0.003417] Initializing cgroup subsys io
  207. [ 0.003427] Initializing cgroup subsys memory
  208. [ 0.003440] Initializing cgroup subsys devices
  209. [ 0.003446] Initializing cgroup subsys freezer
  210. [ 0.003451] Initializing cgroup subsys net_cls
  211. [ 0.003459] Initializing cgroup subsys perf_event
  212. [ 0.003466] Initializing cgroup subsys net_prio
  213. [ 0.003471] Initializing cgroup subsys hugetlb
  214. [ 0.003476] Initializing cgroup subsys pids
  215. [ 0.003496] ftrace: allocating 31845 entries in 125 pages
  216. [ 0.047097] Remapping and enabling EFI services.
  217. [ 0.047107] EFI remap 0x00000000e7810000 => 0000000040000000
  218. [ 0.047184] EFI remap 0x00000000e7db0000 => 00000000403e0000
  219. [ 0.047227] EFI remap 0x00000000f4284000 => 0000000040614000
  220. [ 0.047242] ASID allocator initialised with 65536 entries
  221. [ 0.048687] Detected PIPT I-cache on CPU1
  222. [ 0.048719] CPU1: Booted secondary processor [410fd081]
  223. [ 0.048948] Detected PIPT I-cache on CPU2
  224. [ 0.048976] CPU2: Booted secondary processor [410fd081]
  225. [ 0.049192] Detected PIPT I-cache on CPU3
  226. [ 0.049210] CPU3: Booted secondary processor [410fd081]
  227. [ 0.049251] Brought up 4 CPUs
  228. [ 0.049264] SMP: Total of 4 processors activated.
  229. [ 0.049270] CPU: All CPU(s) started at EL2
  230. [ 0.049622] devtmpfs: initialized
  231. [ 0.051463] evm: security.selinux
  232. [ 0.051467] evm: security.SMACK64
  233. [ 0.051470] evm: security.SMACK64EXEC
  234. [ 0.051473] evm: security.SMACK64TRANSMUTE
  235. [ 0.051475] evm: security.SMACK64MMAP
  236. [ 0.051478] evm: security.ima
  237. [ 0.051481] evm: security.capability
  238. [ 0.051735] DMI not present or invalid.
  239. [ 0.051868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  240. [ 0.051906] futex hash table entries: 1024 (order: 5, 131072 bytes)
  241. [ 0.052151] pinctrl core: initialized pinctrl subsystem
  242. [ 0.052642] NET: Registered protocol family 16
  243. [ 0.062947] cpuidle: using governor ladder
  244. [ 0.074953] cpuidle: using governor menu
  245. [ 0.075138] vdso: 2 pages (1 code @ ffff800000e51000, 1 data @ ffff800000e50000)
  246. [ 0.075158] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  247. [ 0.075296] DMA: preallocated 256 KiB pool for atomic allocations
  248. [ 0.075379] Serial: AMBA PL011 UART driver
  249. [ 0.075845] irq: no irq domain found for /ap806/config-space@f0000000/interrupt-controller@3f0100 !
  250. [ 0.091908] ACPI: Interpreter disabled.
  251. [ 0.092242] vgaarb: loaded
  252. [ 0.092846] SCSI subsystem initialized
  253. [ 0.092987] usbcore: registered new interface driver usbfs
  254. [ 0.093010] usbcore: registered new interface driver hub
  255. [ 0.093042] usbcore: registered new device driver usb
  256. [ 0.093493] dmi: Firmware registration failed.
  257. [ 0.094013] NetLabel: Initializing
  258. [ 0.094018] NetLabel: domain hash size = 128
  259. [ 0.094020] NetLabel: protocols = UNLABELED CIPSOv4
  260. [ 0.094041] NetLabel: unlabeled traffic allowed by default
  261. [ 0.094348] clocksource: Switched to clocksource arch_sys_counter
  262. [ 0.110487] AppArmor: AppArmor Filesystem Enabled
  263. [ 0.110687] pnp: PnP ACPI: disabled
  264. [ 0.115059] NET: Registered protocol family 2
  265. [ 0.115367] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  266. [ 0.115529] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  267. [ 0.115675] TCP: Hash tables configured (established 32768 bind 32768)
  268. [ 0.115731] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  269. [ 0.115765] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  270. [ 0.115886] NET: Registered protocol family 1
  271. [ 0.116015] Unpacking initramfs...
  272. [ 5.224262] Freeing initrd memory: 23136K (ffff8000a18f9000 - ffff8000a2f91000)
  273. [ 5.224597] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  274. [ 5.224827] kvm [1]: interrupt-controller@f0240000 IRQ5
  275. [ 5.224955] kvm [1]: timer IRQ3
  276. [ 5.224965] kvm [1]: Hyp mode initialized successfully
  277. [ 5.225667] audit: initializing netlink subsys (disabled)
  278. [ 5.225709] audit: type=2000 audit(5.188:1): initialized
  279. [ 5.226015] Initialise system trusted keyring
  280. [ 5.226246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  281. [ 5.229989] zbud: loaded
  282. [ 5.230555] VFS: Disk quotas dquot_6.6.0
  283. [ 5.230643] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  284. [ 5.231409] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  285. [ 5.232107] fuse init (API version 7.23)
  286. [ 5.232448] Key type big_key registered
  287. [ 5.232482] Allocating IMA MOK and blacklist keyrings.
  288. [ 5.233205] Key type asymmetric registered
  289. [ 5.233214] Asymmetric key parser 'x509' registered
  290. [ 5.233327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  291. [ 5.233396] io scheduler noop registered
  292. [ 5.233403] io scheduler deadline registered (default)
  293. [ 5.233492] io scheduler cfq registered
  294. [ 5.234534] libphy: Fixed MDIO Bus: probed
  295. [ 5.234541] tun: Universal TUN/TAP device driver, 1.6
  296. [ 5.234544] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  297. [ 5.234652] libphy: mdio_driver_register: mv88e6xxx
  298. [ 5.234812] libphy: orion_mdio_bus: probed
  299. [ 5.237589] marvell: module verification failed: signature and/or required key missing - tainting kernel
  300. [ 5.238511] libphy: orion_mdio_bus: probed
  301. [ 5.238740] PPP generic driver version 2.4.2
  302. [ 5.238910] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  303. [ 5.238925] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  304. [ 5.239828] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  305. [ 5.242903] console [ttyS0] disabled
  306. [ 5.263079] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 7, base_baud = 12500000) is a 16550A
  307. [ 6.297777] console [ttyS0] enabled
  308. [ 6.301663] msm_serial: driver initialized
  309. [ 6.306248] Unable to detect cache hierarchy from DT for CPU 0
  310. [ 6.314986] loop: module loaded
  311. [ 6.318794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  312. [ 6.325370] ehci-pci: EHCI PCI platform driver
  313. [ 6.329860] ehci-orion: EHCI orion driver
  314. [ 6.333944] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  315. [ 6.340161] ohci-pci: OHCI PCI platform driver
  316. [ 6.344648] uhci_hcd: USB Universal Host Controller Interface driver
  317. [ 6.351555] mousedev: PS/2 mouse device common for all mice
  318. [ 6.357507] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  319. [ 6.363743] i2c /dev entries driver
  320. [ 6.367893] device-mapper: uevent: version 1.0.3
  321. [ 6.372691] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  322. [ 6.381396] ledtrig-cpu: registered to indicate activity on CPUs
  323. [ 6.387438] EFI Variables Facility v0.08 2004-May-17
  324. [ 6.393363] marvell-cp110-system-controller0: probe of f4440000.system-controller failed with error -17
  325. [ 6.403397] NET: Registered protocol family 10
  326. [ 6.408218] NET: Registered protocol family 17
  327. [ 6.412780] Key type dns_resolver registered
  328. [ 6.417285] Registered cp15_barrier emulation handler
  329. [ 6.422367] Registered setend emulation handler
  330. [ 6.427244] registered taskstats version 1
  331. [ 6.431398] Loading compiled-in X.509 certificates
  332. [ 6.437822] Loaded X.509 cert 'Build time autogenerated kernel key: 87c33b6ca848f139fcd0550bd2e7945839d5f5ab'
  333. [ 6.447833] zswap: loaded using pool lzo/zbud
  334. [ 6.455895] Key type trusted registered
  335. [ 6.466559] Key type encrypted registered
  336. [ 6.470619] AppArmor: AppArmor sha1 policy hashing enabled
  337. [ 6.476138] ima: No TPM chip found, activating TPM-bypass!
  338. [ 6.481707] evm: HMAC attrs: 0x1
  339. [ 6.485352] PCI host bridge /cp110-master/pcie@f2600000 ranges:
  340. [ 6.491327] IO 0xf9000000..0xf900ffff -> 0xf9000000
  341. [ 6.496496] MEM 0xf6000000..0xf6efffff -> 0xf6000000
  342. [ 6.503254] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
  343. [ 6.510262] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
  344. [ 6.516911] pci_bus 0000:00: root bus resource [bus 00-ff]
  345. [ 6.522426] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
  346. [ 6.531950] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf6efffff]
  347. [ 6.539180] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf60fffff]
  348. [ 6.546008] pci 0000:00:00.0: PCI bridge to [bus 01]
  349. [ 6.858463] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  350. [ 6.865682] xhci-hcd f2500000.usb3: xHCI Host Controller
  351. [ 6.871034] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
  352. [ 6.878638] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  353. [ 6.887221] xhci-hcd f2500000.usb3: irq 10, io mem 0xf2500000
  354. [ 6.893077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  355. [ 6.899905] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  356. [ 6.907163] usb usb1: Product: xHCI Host Controller
  357. [ 6.912064] usb usb1: Manufacturer: Linux 4.4.0-9977-generic xhci-hcd
  358. [ 6.918536] usb usb1: SerialNumber: f2500000.usb3
  359. [ 6.923572] hub 1-0:1.0: USB hub found
  360. [ 6.927357] hub 1-0:1.0: 1 port detected
  361. [ 6.931465] xhci-hcd f2500000.usb3: xHCI Host Controller
  362. [ 6.936813] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
  363. [ 6.944367] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  364. [ 6.952546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  365. [ 6.959370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  366. [ 6.966627] usb usb2: Product: xHCI Host Controller
  367. [ 6.971529] usb usb2: Manufacturer: Linux 4.4.0-9977-generic xhci-hcd
  368. [ 6.978001] usb usb2: SerialNumber: f2500000.usb3
  369. [ 6.982967] hub 2-0:1.0: USB hub found
  370. [ 6.986750] hub 2-0:1.0: 1 port detected
  371. [ 6.990961] xhci-hcd f2510000.usb3: xHCI Host Controller
  372. [ 6.996316] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
  373. [ 7.003910] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  374. [ 7.012499] xhci-hcd f2510000.usb3: irq 11, io mem 0xf2510000
  375. [ 7.018341] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  376. [ 7.025170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  377. [ 7.032429] usb usb3: Product: xHCI Host Controller
  378. [ 7.037332] usb usb3: Manufacturer: Linux 4.4.0-9977-generic xhci-hcd
  379. [ 7.043803] usb usb3: SerialNumber: f2510000.usb3
  380. [ 7.048777] hub 3-0:1.0: USB hub found
  381. [ 7.052560] hub 3-0:1.0: 1 port detected
  382. [ 7.056650] xhci-hcd f2510000.usb3: xHCI Host Controller
  383. [ 7.061994] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
  384. [ 7.069540] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  385. [ 7.077716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  386. [ 7.084539] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  387. [ 7.091797] usb usb4: Product: xHCI Host Controller
  388. [ 7.096700] usb usb4: Manufacturer: Linux 4.4.0-9977-generic xhci-hcd
  389. [ 7.103170] usb usb4: SerialNumber: f2510000.usb3
  390. [ 7.108127] hub 4-0:1.0: USB hub found
  391. [ 7.111909] hub 4-0:1.0: 1 port detected
  392. [ 7.116286] rtc-efi rtc-efi: setting system clock to 1970-01-01 00:00:33 UTC (33)
  393. [ 7.125140] Freeing unused kernel memory: 784K (ffff800000d73000 - ffff800000e37000)
  394. [ 7.132953] Freeing alternatives memory: 60K (ffff800000e37000 - ffff800000e46000)
  395. Loading, please wait...
  396. Begin: Loading multipath modules ... [ 7.167718] device-mapper: multipath: version 1.10.0 loaded
  397. Success: loaded module dm-multipath.
  398. done.
  399. Begin: Loading mult[ 7.178165] alua: device handler registered
  400. ipath hardware handlers ... Success: loaded module scsi_dh_alua.[ 7.187802] rdac: device handler registered
  401.  
  402. Success: loaded module scsi_dh_rdac.
  403. [ 7.197612] emc: device handler registered
  404. Success: loaded module scsi_dh_emc.
  405. done.
  406. Begin: Starting multipathd ... done.
  407. [ 7.212473] random: multipathd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  408. starting version[ 7.222562] random: multipathd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  409. 229
  410. [ 7.224175] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  411. [ 7.224351] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  412. [ 7.224380] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  413. [ 7.224413] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  414. [ 7.225970] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  415. [ 7.226053] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  416. [ 7.226090] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  417. [ 7.226130] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
  418. [ 7.283611] sdhci: Secure Digital Host Controller Interface driver
  419. [ 7.283612] sdhci: Copyright(c) Pierre Ossman
  420. [ 7.284949] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  421. [ 7.284955] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  422. [ 7.289698] sdhci-pltfm: SDHCI platform and OF driver helper
  423. [ 7.292364] xenon-sdhci f06e0000.sdhci: Fail to get Xenon PHY type. Use default eMMC 5.1 PHY
  424. [ 7.292389] xenon-sdhci f06e0000.sdhci: No vmmc regulator found
  425. [ 7.292391] xenon-sdhci f06e0000.sdhci: No vqmmc regulator found
  426. [ 7.292622] scsi host0: ahci
  427. [ 7.292875] scsi host1: ahci
  428. [ 7.293000] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 9
  429. [ 7.293003] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 9
  430. [ 7.330403] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!