Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ELILO v3.16 for EFI/IA-64
- ..
- Uncompressing Linux... done
- Loading file AC10027B.initrd.img...done
- [ 0.000000] Linux version 6.3.0-0-mckinley (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-12) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.3.2-1~exp1 (2023-05-15)
- [ 0.000000] efi: EFI v2.1 by HP
- [ 0.000000] efi: SALsystab=0xdfdd63a18 ESI=0xdfdd63f18 ACPI 2.0=0x3d3c4014 HCDP=0xdffff8798 SMBIOS=0x3d368000
- [ 0.000000] PCDP: v3 at 0xdffff8798
- [ 0.000000] earlycon: uart8250 at I/O port 0x4000 (options '115200n8')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x000000003D3C4014 000024 (v02 HP )
- [ 0.000000] ACPI: XSDT 0x000000003D3C4580 000124 (v01 HP RX2800-2 00000001 01000013)
- [...]
- [ 37.287361] Run /init as init process
- Loading, please wait...
- Starting systemd-udevd version 252.6-1
- [ 37.545515] ACPI: bus type USB registered
- [ 37.556371] usbcore: registered new interface driver usbfs
- [ 37.556371] pps_core: LinuxPPS API ver. 1 registered
- [ 37.562612] usbcore: registered new interface driver hub
- [ 37.569399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 37.573399] PTP clock support registered
- [ 37.576182] usbcore: registered new device driver usb
- [ 37.610185] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 37.616290] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 37.627045] GSI 19 (level, low) -> CPU 7 (0x0700) vector 75
- [ 37.628369] ------------[ cut here ]------------
- [ 37.631860] ehci-pci 0000:00:1a.7: EHCI Host Controller
- [ 37.638356] WARNING: CPU: 6 PID: 158 at kernel/irq/msi.c:196 msi_domain_free_descs+0x240/0x280
- [ 37.645609] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 37.661221] Modules linked in: igb(+) uhci_hcd(+) ehci_pci ehci_hcd i2c_algo_bit ptp usbcore pps_core i2c_core usb_common
- [ 37.667198] ehci-pci 0000:00:1a.7: debug port 1
- [ 37.685487] CPU: 6 PID: 158 Comm: (udev-worker) Not tainted 6.3.0-0-mckinley #1 Debian 6.3.2-1~exp1
- [ 37.687819] ehci-pci 0000:00:1a.7: irq 57, io mem 0x58603000
- [ 37.685487] Hardware name: hp Integrity rx2800 i2, BIOS 01.93 09/12/2012
- [ 37.685487]
- [ 37.685487] Call Trace:
- [ 37.685487] [<a0000001000156d0>] show_stack.part.0+0x30/0x60
- [ 37.685487] sp=e000000845637a70 bsp=e000000845631c18
- [ 37.721540] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 37.685487] [<a000000100015950>] show_stack+0x90/0xc0
- [ 37.685487] sp=e000000845637a70 bsp=e000000845631be0
- [ 37.746605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
- [ 37.685487] [<a0000001014c3750>] dump_stack_lvl+0xf0/0x160
- [ 37.685487] sp=e000000845637c40 bsp=e000000845631b70
- [ 37.773979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 37.685487] [<a0000001014c37f0>] dump_stack+0x30/0x60
- [ 37.685487] sp=e000000845637c40 bsp=e000000845631b18
- [ 37.685487] [<a00000010006c060>] __warn+0x160/0x200
- [ 37.685487] sp=e000000845637c40 bsp=e000000845631ad0
- [ 37.800833] usb usb1: Product: EHCI Host Controller
- [ 37.685487] [<a00000010006c400>] warn_slowpath_fmt+0x300/0x360
- [ 37.685487] sp=e000000845637c40 bsp=e000000845631a58
- [ 37.835266] usb usb1: Manufacturer: Linux 6.3.0-0-mckinley ehci_hcd
- [ 37.685487] [<a000000100199060>] msi_domain_free_descs+0x240/0x280
- [ 37.685487] sp=e000000845637c70 bsp=e000000845631a18
- [ 37.858814] usb usb1: SerialNumber: 0000:00:1a.7
- [ 37.685487] [<a000000100199cd0>] msi_domain_free_msi_descs_range+0x50/0x80
- [ 37.685487] sp=e000000845637c80 bsp=e0000008456319d8
- [ 37.889520] hub 1-0:1.0: USB hub found
- [ 37.685487] [<a000000100c26cf0>] pci_msi_teardown_msi_irqs+0x90/0xe0
- [ 37.685487] sp=e000000845637c90 bsp=e0000008456319b8
- [ 37.911330] hub 1-0:1.0: 2 ports detected
- [ 37.685487] [<a000000100c26010>] pci_free_msi_irqs+0x30/0xa0
- [ 37.685487] sp=e000000845637c90 bsp=e000000845631990
- [ 37.936372] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 37.685487] [<a000000100c21ed0>] pci_disable_msix+0xb0/0xe0
- [ 37.685487] sp=e000000845637c90 bsp=e000000845631968
- [ 37.685487] [<a000000200392130>] igb_reset_interrupt_capability+0x230/0x260 [igb]
- [ 37.685487] sp=e000000845637c90 bsp=e000000845631928
- [ 37.956487] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
- [ 37.685487] [<a0000002003b39d0>] igb_probe+0x970/0x3380 [igb]
- [ 37.685487] sp=e000000845637c90 bsp=e000000845631858
- [ 37.980953] uhci_hcd 0000:00:1a.0: detected 2 ports
- [ 37.685487] [<a000000100c082d0>] local_pci_probe+0x90/0x140
- [ 37.685487] sp=e000000845637ca0 bsp=e000000845631818
- [ 38.009993] uhci_hcd 0000:00:1a.0: irq 56, io port 0x00001020
- [ 37.685487] [<a000000100c09d50>] pci_device_probe+0x190/0x520
- [ 37.685487] sp=e000000845637ca0 bsp=e0000008456317c0
- [ 38.034237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
- [ 37.685487] [<a000000100e61100>] really_probe+0x260/0xb20
- [ 37.685487] sp=e000000845637cc0 bsp=e000000845631770
- [ 38.059287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 37.685487] [<a000000100e61c50>] __driver_probe_device+0x290/0x420
- [ 37.685487] sp=e000000845637cc0 bsp=e000000845631730
- [ 37.685487] [<a000000100e61e30>] driver_probe_device+0x50/0x160
- [ 37.685487] sp=e000000845637cc0 bsp=e0000008456316e8
- [ 38.086670] usb usb2: Product: UHCI Host Controller
- [ 37.685487] [<a000000100e626c0>] __driver_attach+0x380/0x4c0
- [ 37.685487] sp=e000000845637cc0 bsp=e0000008456316b0
- [ 37.685487] [<a000000100e5bc40>] bus_for_each_dev+0x100/0x1c0
- [ 37.685487] sp=e000000845637cc0 bsp=e000000845631668
- [ 38.112909] usb usb2: Manufacturer: Linux 6.3.0-0-mckinley uhci_hcd
- [ 37.685487] [<a000000100e5fd40>] driver_attach+0x40/0x60
- [ 37.685487] sp=e000000845637cd0 bsp=e000000845631648
- [ 37.685487] [<a000000100e5ea90>] bus_add_driver+0x230/0x520
- [ 37.685487] sp=e000000845637cd0 bsp=e000000845631600
- [ 38.148943] usb usb2: SerialNumber: 0000:00:1a.0
- [ 37.685487] [<a000000100e64680>] driver_register+0x100/0x360
- [ 37.685487] sp=e000000845637cd0 bsp=e0000008456315c8
- [ 38.173525] hub 2-0:1.0: USB hub found
- [ 38.172999] [<a000000100c07720>] __pci_register_driver+0xc0/0xe0
- [ 38.172999] sp=e000000845637cd0 bsp=e000000845631598
- [ 38.172999] [<a0000002000100c0>] igb_init_module+0xc0/0x120 [igb]
- [ 38.172999] sp=e000000845637cd0 bsp=e000000845631578
- [ 38.198448] hub 2-0:1.0: 2 ports detected
- [ 38.172999] [<a00000010000a940>] do_one_initcall+0xe0/0x560
- [ 38.172999] sp=e000000845637cd0 bsp=e000000845631548
- [ 38.233525] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 38.172999] [<a0000001001d2280>] do_init_module+0xa0/0x440
- [ 38.172999] sp=e000000845637d10 bsp=e000000845631510
- [ 38.172999] [<a0000001001d7820>] load_module+0x4f20/0x5620
- [ 38.172999] sp=e000000845637d10 bsp=e000000845631378
- [ 38.256195] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
- [ 38.172999] [<a0000001001d84a0>] __do_sys_finit_module+0x180/0x220
- [ 38.172999] sp=e000000845637d90 bsp=e000000845631340
- [ 38.278017] ehci-pci 0000:00:1d.7: debug port 1
- [ 38.172999] [<a0000001001d85d0>] sys_finit_module+0x30/0x60
- [ 38.172999] sp=e000000845637e30 bsp=e0000008456312e8
- [ 38.309508] ehci-pci 0000:00:1d.7: irq 57, io mem 0x58602000
- [ 38.172999] [<a00000010000c9e0>] ia64_ret_from_syscall+0x0/0x20
- [ 38.172999] sp=e000000845637e30 bsp=e0000008456312e0
- [ 38.341520] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 38.343188] ---[ end trace 0000000000000000 ]---
- [ 38.359839] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
- [ 38.461057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 38.470935] usb usb3: Product: EHCI Host Controller
- [ 38.477291] usb usb3: Manufacturer: Linux 6.3.0-0-mckinley ehci_hcd
- [ 38.485843] usb usb3: SerialNumber: 0000:00:1d.7
- [ 38.492355] hub 3-0:1.0: USB hub found
- [ 38.496355] hub 3-0:1.0: 5 ports detected
- [ 38.504376] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 38.509247] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
- [ 38.519181] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 38.525951] uhci_hcd 0000:00:1d.0: irq 58, io port 0x00001040
- [ 38.533975] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
- [ 38.544296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 38.546200] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 38.554189] usb usb4: Product: UHCI Host Controller
- [ 38.563019] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x2) xx:xx:xx:xx:xx:xx
- [ 38.569426] usb usb4: Manufacturer: Linux 6.3.0-0-mckinley uhci_hcd
- [ 38.579223] igb 0000:08:00.0: eth0: PBA No: Unknown
- [ 38.588061] usb usb4: SerialNumber: 0000:00:1d.0
- [ 38.595092] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- [ 38.605525] hub 4-0:1.0: USB hub found
- [ 38.617452] hub 4-0:1.0: 2 ports detected
- [ 38.640360] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 38.647248] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
- [ 38.657278] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 38.664044] uhci_hcd 0000:00:1d.1: irq 58, io port 0x00001060
- [ 38.672229] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
- [ 38.682691] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 38.692693] usb usb5: Product: UHCI Host Controller
- [ 38.699463] usb usb5: Manufacturer: Linux 6.3.0-0-mckinley uhci_hcd
- [ 38.709524] usb usb5: SerialNumber: 0000:00:1d.1
- [ 38.717525] hub 5-0:1.0: USB hub found
- [ 38.718431] hub 5-0:1.0: 2 ports detected
- [ 38.744360] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 38.748966] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
- [ 38.759192] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 38.765981] uhci_hcd 0000:00:1d.2: irq 56, io port 0x00001080
- [ 38.774228] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
- [ 38.784524] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 38.790200] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
- [ 38.794293] usb usb6: Product: UHCI Host Controller
- [ 38.802705] igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x2) xx:xx:xx:xx:xx:xx
- [ 38.809918] usb usb6: Manufacturer: Linux 6.3.0-0-mckinley uhci_hcd
- [ 38.819603] igb 0000:08:00.1: eth1: PBA No: Unknown
- [ 38.829524] usb usb6: SerialNumber: 0000:00:1d.2
- [ 38.834384] igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- [ 38.845525] hub 6-0:1.0: USB hub found
- [ 38.856404] hub 6-0:1.0: 2 ports detected
- [ 38.865277] uhci_hcd 0000:0a:00.4: UHCI Host Controller
- [ 38.868256] uhci_hcd 0000:0a:00.4: new USB bus registered, assigned bus number 7
- [ 38.878125] uhci_hcd 0000:0a:00.4: detected 8 ports
- [ 38.884762] uhci_hcd 0000:0a:00.4: port count misdetected? forcing to 2 ports
- [ 38.894238] uhci_hcd 0000:0a:00.4: irq 103, io port 0x00004020
- [ 38.902451] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
- [ 38.913912] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 38.924532] usb usb7: Product: UHCI Host Controller
- [ 38.931187] usb usb7: Manufacturer: Linux 6.3.0-0-mckinley uhci_hcd
- [ 38.941525] usb usb7: SerialNumber: 0000:0a:00.4
- [ 38.949525] hub 7-0:1.0: USB hub found
- [ 38.951175] hub 7-0:1.0: 2 ports detected
- [ 39.026200] igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 39.034790] igb 0000:09:00.0: eth2: (PCIe:2.5Gb/s:Width x2) xx:xx:xx:xx:xx:xx
- [ 39.044486] igb 0000:09:00.0: eth2: PBA No: Unknown
- [ 39.051185] igb 0000:09:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- [ 39.196372] usb 7-1: new full-speed USB device number 2 using uhci_hcd
- [ 39.234200] igb 0000:09:00.1: Intel(R) Gigabit Ethernet Network Connection
- [ 39.242697] igb 0000:09:00.1: eth3: (PCIe:2.5Gb/s:Width x2) xx:xx:xx:xx:xx:xx
- [ 39.252513] igb 0000:09:00.1: eth3: PBA No: Unknown
- [ 39.259212] igb 0000:09:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- [ 39.273521] igb 0000:08:00.0 enp8s0f0: renamed from eth0
- [ 39.299296] igb 0000:08:00.1 enp8s0f1: renamed from eth1
- [ 39.325521] igb 0000:09:00.1 enp9s0f1: renamed from eth3
- [ 39.346561] igb 0000:09:00.0 enp9s0f0: renamed from eth2
- Begin: Loading essential drivers ... [ 39.396363] usb 7-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02
- done.[ 39.406843] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 39.422299] usb 7-1: Product: Virtual Management Device
- [ 39.425175] usb 7-1: Manufacturer: HP
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done.
- [ 39.453509] hid: raw HID events driver (C) Jiri Kosina
- [ 39.493523] usbcore: registered new interface driver usbhid
- [ 39.496804] usbhid: USB HID core driver
- [ 39.504375] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:1c.5/0000:0a:00.4/usb7/7-1/7-1:1.0/0003:03F0:7029.0001/input/input1
- [ 39.589521] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Management Device] on usb-0000:0a:00.4-1/input0
- [ 39.604376] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:1c.5/0000:0a:00.4/usb7/7-1/7-1:1.1/0003:03F0:7029.0002/input/input2
- [ 39.621046] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:0a:00.4-1/input1
- Begin: Waiting up to 180 secs for enp8s0f0 to become available ... done.
- IP-Config: enp8s0f0 hardware address xx:xx:xx:xx:xx:xx mtu 1500 DHCP
- IP-Config: no response after 2 secs - giving up
- IP-Config: enp8s0f0 hardware address xx:xx:xx:xx:xx:xx mtu 1500 DHCP
- [ 42.041542] igb 0000:08:00.0 enp8s0f0: igb: enp8s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- [ 42.054786] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0f0: link becomes ready
- [ 42.920376] ipconfig(206): unaligned access to 0x60000fffffc0b42f, ip=0x40000000000057b1
- [ 42.927898] ipconfig(206): unaligned access to 0x60000fffffc0b42f, ip=0x40000000000057b1
- IP-Config: enp8s0f0 guessed broadcast address 172.16.255.255
- IP-Config: enp8s0f0 complete (dhcp from 172.16.0.1):
- address: 172.16.2.123 broadcast: 172.16.255.255 netmask: 255.255.0.0
- gateway: 172.16.0.1 dns0 : 172.16.0.1 dns1 : 0.0.0.0
- host : rx2800-i2
- domain : machine-hall.org [ 42.984362] FS-Cache: Loaded
- rootserver: 172.16.0.2 rootpath: 172.16.0.2:/srv/nfs/rx2800-i2/root
- filename : /AC10027B
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement