Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2015-10-26 20:02:11] [Output] : ★ Julio Lopez enters the 1996 Chevrolet Camaro, then turns the key into the ignition as he drives it
- [2015-10-26 20:02:28] [Output] : ★ over the car lift - pulling the key out after turning it back counter-clockwise and places t ((Julio Lopez))
- [2015-10-26 20:02:32] [Output] : ★ -he key into his mechanic jacket. ((Julio Lopez))
- [2015-10-26 20:03:32] [Output] : ★ Julio Lopez pulls a button inside the vehicle, opening up the vehicle's hood.
- [2015-10-26 20:04:00] [Output] : ★ Julio Lopez opens up the driver's door, then steps outside and heads towards the front side of the
- [2015-10-26 20:04:13] [Output] : ★ vehicle - opening up the hood by reaching his fingers under it, then supports the hood with ((Julio Lopez))
- [2015-10-26 20:04:15] [Output] : ★ the stands. ((Julio Lopez))
- [2015-10-26 21:02:09] [Output] : ★ Julio Lopez reaches for two boxes near the vehicle - one being a toolbox and the other one being
- [2015-10-26 21:02:28] [Output] : ★ a box filled with empty slots - a bolt organizer box. ((Julio Lopez))
- [2015-10-26 21:02:40] [Output] : ★ Julio Lopez places both of the boxes onto the ground near the front of the vehicle, then reaches
- [2015-10-26 21:02:56] [Output] : ★ into the toolbox and takes out a socket and ratchet, untightening the nuts on the battery's ((Julio Lopez))
- [2015-10-26 21:03:08] [Output] : ★ negative terminal and proceeds to remove the cable, then repeats the action for the positive ((Julio Lopez))
- [2015-10-26 21:03:18] [Output] : ★ cable after removing the plastic cover, then removes it as well. ((Julio Lopez))
- [2015-10-26 21:05:03] [Output] : ★ Julio Lopez then reaches for the battery handles and pulls it upwards - then places it onto the ground.
- [2015-10-26 21:05:21] [Output] : ★ Julio Lopez places back the socket and wrench into the toolbox, then reaches into his pocket for the
- [2015-10-26 21:05:32] [Output] : ★ lift remote; clicking a button as to raise the lift. ((Julio Lopez))
- [2015-10-26 21:06:13] [Output] : ★ Julio Lopez reaches for two medium-sized containers near the counter, placing one under the coolant
- [2015-10-26 21:06:25] [Output] : ★ and another one under the engine oil valve; proceeding to unscrew the valve as to drain ((Julio Lopez))
- [2015-10-26 21:06:29] [Output] : ★ both of them into the containers. ((Julio Lopez))
- [2015-10-26 21:07:06] [Output] : ★ There wouldn't be any glitter in the engine oil dripping from the vehicle. ((Julio Lopez))
- [2015-10-26 21:08:41] [Output] : ★ Julio Lopez pushes away the containers from under the vehicle towards the counter.
- [2015-10-26 21:08:54] [Output] : ★ Julio Lopez reaches into his mechanic's jacket pocket, taking out a lift remote and lowering the
- [2015-10-26 21:08:56] [Output] : ★ car again. ((Julio Lopez))
- [2015-10-26 21:09:07] [Output] : ★ Julio Lopez places back the clamps into the toolbox and reaches into it once more for a socket
- [2015-10-26 21:09:21] [Output] : ★ and wrench - removing the bolts holding down the radiator then placing the bolts into the ((Julio Lopez))
- [2015-10-26 21:09:34] [Output] : ★ bolt organizer in a space labeled "RAD" and places back the socket and ratchet into the ((Julio Lopez))
- [2015-10-26 21:09:50] [Output] : ★ toolbox, then removes the radiator entirely from the vehicle and leans it up onto the ((Julio Lopez))
- [2015-10-26 21:09:56] [Output] : ★ wall - away from the vehicle. ((Julio Lopez))
- [2015-10-26 21:10:43] [Output] : ★ Julio Lopez reaches into the hood once more as he aims towards the throttle cabl
- [2015-10-26 21:10:59] [Output] : ★ Julio Lopez then reaches into the toolbox and takes out the ratchet and socket once more, removing the
- [2015-10-26 21:11:08] [Output] : ★ bolts that hold the cable into the intake, then placing the bolts into the holder's second ((Julio Lopez))
- [2015-10-26 21:11:10] [Output] : ★ slot. ((Julio Lopez))
- [2015-10-26 21:11:22] [Output] : ★ Julio Lopez then pushes the intake out of the way.
- [2015-10-26 21:11:37] [Output] : ★ Julio Lopez reaches into the toolbox for a white small marker, marking the hood hinges to line
- [2015-10-26 21:11:49] [Output] : ★ up the hood properly once installed, as it is going to get uninstalled. ((Julio Lopez))
- [2015-10-26 21:11:58] [Output] : ★ Julio Lopez places back the marker into the toolbox, then reaches for the hood - lowering it and
- [2015-10-26 21:12:12] [Output] : ★ placing his hands under it for the bolts carefully - as not to scratch the fenders - then ((Julio Lopez))
- [2015-10-26 21:12:26] [Output] : ★ unscrews them as he removes the hood entirely from its position, and leans it onto ((Julio Lopez))
- [2015-10-26 21:12:31] [Output] : ★ the wall - next to the radiator. ((Julio Lopez))
- [2015-10-26 21:12:46] [Output] : ★ Julio Lopez unbolts the airbox using the socket and ratchet, then removes it and places it next to the
- [2015-10-26 21:12:48] [Output] : ★ other car parts. ((Julio Lopez))
- [2015-10-26 21:13:11] [Output] : ★ Julio Lopez proceeds to removing the wiring harness between the runners of the intake manifold.
- [2015-10-26 21:13:24] [Output] : ★ Julio Lopez turns his head towards the air compressor - disconnecting it and the power steering pump.
- [2015-10-26 21:13:40] [Output] : ★ Julio Lopez reaches for the three bolts on the power assembly - the bolts being of different sizes
- [2015-10-26 21:13:45] [Output] : ★ of two being 14mm, and one being 17mm. ((Julio Lopez))
- [2015-10-26 21:14:01] [Output] : ★ Julio Lopez proceeds to use the appropriate sockets, and removes the three bolts and places them
- [2015-10-26 21:14:06] [Output] : ★ into the bolt organizer as required. ((Julio Lopez))
- [2015-10-26 21:14:14] [Output] : ★ Julio Lopez proceeds to remove the pump from the engine and pushes it out of the way.
- [2015-10-26 21:14:31] [Output] : ★ There would be a fair amount of clearance between the harmonic balancer and the fender. ((Julio Lopez))
- [2015-10-26 21:14:47] [Output] : ★ Julio Lopez reaches for the impact gun in the toolbox, proceeding to remove the bolts holding the
- [2015-10-26 21:14:52] [Output] : ★ harmonic balancer into place. ((Julio Lopez))
- [2015-10-26 21:15:05] [Output] : ★ Julio Lopez pulls out the harmonic balancer and places it next to the vehicle parts near the wall.
- [2015-10-26 21:15:48] [Output] : ★ Julio Lopez threads back the bolt that held the harmonic balancer into place back in once more.
- [2015-10-26 21:16:18] [Output] : ★ Julio Lopez proceeds to reach for the exhaust pipe - disconnecting the bolts holding it with the impact
- [2015-10-26 21:16:33] [Output] : ★ guns as well. ((Julio Lopez))
- [2015-10-26 21:16:43] [Output] : ★ Julio Lopez places back the impact gun into the toolbox, then reaches for a hydro-jack near the counter
- [2015-10-26 21:17:06] [Output] : ★ as he pushes it under the transmission pan to push the transmission pan up,then pull it out. ((Julio Lopez))
- [2015-10-26 21:17:18] [Output] : ★ The cover hiding the drive plate would be obvious now. ((Julio Lopez))
- [2015-10-26 21:17:28] [Output] : ★ Julio Lopez pulls the plastic cover and places it next to the car parts near the wall.
- [2015-10-26 21:17:37] [Output] : ★ Julio Lopez turns his head once more to the now obvious torque converter, which was hidden by the
- [2015-10-26 21:17:39] [Output] : ★ plastic cover. ((Julio Lopez))
- [2015-10-26 21:17:57] [Output] : ★ Julio Lopez reaches into the toolbox for a small white paint marker - marking the torque converter and
- [2015-10-26 21:18:08] [Output] : ★ the driver plate so that they can be easily aligned later on. ((Julio Lopez))
- [2015-10-26 21:18:22] [Output] : ★ Julio Lopez places back the marker and takes out a socket with a ratchet as he starts to loosen up the
- [2015-10-26 21:18:24] [Output] : ★ spark plugs. ((Julio Lopez))
- [2015-10-26 21:18:43] [Output] : ★ Julio Lopez proceeds to place the socket and ratchet onto the bolts on the crank shaft and loosens them
- [2015-10-26 21:18:54] [Output] : ★ up from the torque converter, moving the converter with his other hand as he rotates it and ((Julio Lopez))
- [2015-10-26 21:19:08] [Output] : ★ removes the bolts from it accordingly - without much worry as the alignment can easily ((Julio Lopez))
- [2015-10-26 21:19:15] [Output] : ★ be set now due to it being marked. ((Julio Lopez))
- [2015-10-26 21:19:26] [Output] : ★ Julio Lopez then heads for the engine to transmission bolts as he starts loosening them up using
- [2015-10-26 21:19:29] [Output] : ★ the socket and ratchet. ((Julio Lopez))
- [2015-10-26 21:19:35] [Output] : ★ Julio Lopez removes the second grade 8 bolt undernear the cover entirely.
- [2015-10-26 21:19:44] [Output] : ★ Julio Lopez reaches for another jack near the counter, and reaches into the counter itself for a small
- [2015-10-26 21:20:20] [Output] : ★ block of wood which he adjusts onto the jack, then pushes it under the oil pan as to get ((Julio Lopez))
- [2015-10-26 21:20:27] [Output] : ★ clearance on the engine bolts to unscrew and remove them. ((Julio Lopez))
- [2015-10-26 21:20:40] [Output] : ★ Julio Lopez proceeds to remove the bolts and nut-set from the first engine mount near the hood.
- [2015-10-26 21:20:46] [Output] : ★ Julio Lopez places the bolts accordingly into the bolts organizer.
- [2015-10-26 21:20:55] [Output] : ★ Julio Lopez removes the bolts and nut sets on the second engine mount - near the fender this time.
- [2015-10-26 21:21:05] [Output] : ★ Julio Lopez removes the final engine to transmission bolt which has already been loosened earlier.
- [2015-10-26 21:21:15] [Output] : ★ As all the bolts have been removed - a small gap would appear between teh engine and ((Julio Lopez))
- [2015-10-26 21:21:18] [Output] : ★ the transmission. ((Julio Lopez))
- [2015-10-26 21:21:25] [Output] : ★ Julio Lopez reaches for a Goodyear Racing Crane near the counter as he moves it towards the
- [2015-10-26 21:21:27] [Output] : ★ left fender. ((Julio Lopez))
- [2015-10-26 21:21:38] [Output] : ★ Julio Lopez reaches for a chain from the counter, then ties up the chain around the intake runners
- [2015-10-26 21:21:42] [Output] : ★ and the exhaust manifold runners around the engine. ((Julio Lopez))
- [2015-10-26 21:21:53] [Output] : ★ Julio Lopez hooks up the chain to the crain - ensuring nothing is bound up by the chain.
- [2015-10-26 21:23:28] [Output] : ★ Julio Lopez double checks that there is nothing remaining still connected to the engine before heading
- [2015-10-26 21:23:30] [Output] : ★ towards the crane. ((Julio Lopez))
- [2015-10-26 21:23:39] [Output] : ★ Julio Lopez jacks up the crane until the tension starts to build on the chain, ensuring again nothing
- [2015-10-26 21:23:47] [Output] : ★ is binding by heading towards the engine himself after the tension had been built and ((Julio Lopez))
- [2015-10-26 21:24:06] [Output] : ★ moves the engine a bit - also separating it farther off from the transmission. ((Julio Lopez))
- [2015-10-26 21:25:17] [Output] : ★ Julio Lopez reaches for a prybar on the counter, then pushes it between the engine and transmission
- [2015-10-26 21:25:22] [Output] : ★ as to separate them further. ((Julio Lopez))
- [2015-10-26 21:25:34] [Output] : ★ Julio Lopez pumps the crane once more - still looking over carefully to ensure nothing is binding the
- [2015-10-26 21:25:35] [Output] : ★ engine. ((Julio Lopez))
- [2015-10-26 21:25:44] [Output] : ★ The drive plate would now be easily visible to Julio. ((Julio Lopez))
- [2015-10-26 21:25:54] [Output] : ★ Julio Lopez cranks up teh engine completely from the vehicle, then carefully pushes the crane
- [2015-10-26 21:26:11] [Output] : ★ away after ensuring the engine has enough leverage. ((Julio Lopez))
- [2015-10-26 21:26:19] [Output] : ★ Engine would now be completely removed from the vehicle. ((Julio Lopez))
- [2015-10-26 21:26:28] [Output] : ★ Julio Lopez reaches into his toolbox as he takes out the marker once more - drawing a paint line
- [2015-10-26 21:26:37] [Output] : ★ onto the retaining disk to recognize which way it faces when re-installed, and the ((Julio Lopez))
- [2015-10-26 21:26:39] [Output] : ★ way it aligns. ((Julio Lopez))
- [2015-10-26 21:26:52] [Output] : ★ Julio Lopez places back the marker and reaches for the impact gun as he starts removing the 6 bolts
- [2015-10-26 21:26:55] [Output] : ★ holding down the retaining disk. ((Julio Lopez))
- [2015-10-26 21:27:17] [Output] : ★ Julio Lopez removes the retaining ring and disk, to finally reveal the retaining plate.
- [2015-10-26 21:27:35] [Output] : ★ Julio Lopez places the retaining ring and disk onto the counter, then reaches for the marker once more
- [2015-10-26 21:27:46] [Output] : ★ in the toolbox as to paint the retaining plate and ring, to know which side faces out when ((Julio Lopez))
- [2015-10-26 21:27:50] [Output] : ★ re-installing. ((Julio Lopez))
- [2015-10-26 21:27:54] [Output] : ★ Julio Lopez removes the rear cover bolts using his hands.
- [2015-10-26 21:28:10] [Output] : ★ Julio Lopez reaches for the torque converter as he pushes it into its shaft then rotates it - ensuring
- [2015-10-26 21:28:36] [Output] : ★ it is set all the way back and very well seated after it stops while rotating three times. ((Julio Lopez))
- [2015-10-26 21:28:49] [Output] : ★ Stops once, Julio proceeds to continue rotating it again. Stops twice, proceeds to rotate it ((Julio Lopez))
- [2015-10-26 21:29:00] [Output] : ★ - stopping one last time after it's been completely seated. ((Julio Lopez))
- [2015-10-26 21:29:09] [Output] : ★ Julio Lopez reaches for the other crank holding a load leveler binded to the new engine.
- [2015-10-26 21:29:19] [Output] : ★ Julio Lopez torques up the drive plate to the crank shaft bolts - at 58 ft. pounds.
- [2015-10-26 21:29:29] [Output] : ★ Julio Lopez cranks up the load leveler to change the pitch of the engine - with tiny increments - as to
- [2015-10-26 21:29:35] [Output] : ★ adjust the engine's angle properly. ((Julio Lopez))
- [2015-10-26 21:29:52] [Output] : ★ Julio Lopez pushes the crank to the vehicle, then places his left hand onto the engine as he pushes it
- [2015-10-26 21:30:01] [Output] : ★ away while lowering it; aligning the engine as he lowers it. ((Julio Lopez))
- [2015-10-26 21:30:21] [Output] : ★ Julio Lopez proceeds to lower the crane very slowly while aligning the engine onto the transmission.
- [2015-10-26 21:30:31] [Output] : ★ Julio Lopez pauses a couple of t imes and looks over at the process carefully - ensuring the engine
- [2015-10-26 21:30:41] [Output] : ★ is not resting on anything while it is being lowered as not to break or damage anything. ((Julio Lopez))
- [2015-10-26 21:30:58] [Output] : ★ The white paint marks drawn earlier on the drive plate to torque converter are obvious. ((Julio Lopez))
- [2015-10-26 21:31:11] [Output] : ★ Julio Lopez spins the converter accordingly for both to line up as prior after lowering the engine
- [2015-10-26 21:31:14] [Output] : ★ entirely. ((Julio Lopez))
- [2015-10-26 21:31:25] [Output] : ★ Julio Lopez reaches into the toolbox as he pulls out two screwdrivers - feeding them through the
- [2015-10-26 21:31:35] [Output] : ★ transmission bolt holes to lever up the alignment for easier bolt installation later on. ((Julio Lopez))
- [2015-10-26 21:31:44] [Output] : ★ Julio Lopez adjusts the engine's position as to align it while using the screwdrivers as guidance, then
- [2015-10-26 21:31:52] [Output] : ★ removes the screwdrivers and places them back into the toolbox and places the bolts ((Julio Lopez))
- [2015-10-26 21:32:04] [Output] : ★ from the bolt organizer accordingly into place - holding the new engine onto the tranny. ((Julio Lopez))
- [2015-10-26 21:32:22] [Output] : ★ Julio Lopez screws the first bolt with a ratchet and socket - ensuring there is no resistance as he
- [2015-10-26 21:32:31] [Output] : ★ does so, still not completely screwing it as he lets it remain a bit loose. ((Julio Lopez))
- [2015-10-26 21:32:41] [Output] : ★ Julio Lopez installs the bolts holding the flex plate to the torque converter using the white marks also
- [2015-10-26 21:32:49] [Output] : ★ drawn on it from before, screwing the bolts to 13 ft. pounds. ((Julio Lopez))
- [2015-10-26 21:33:37] [Output] : ★ Julio Lopez looks over the installation, then reaches for a few bottles as he tops the new engine
- [2015-10-26 21:33:48] [Output] : ★ oil and coolant - this is after all the parts that were removed earlier have been re-install ((Julio Lopez))
- [2015-10-26 21:33:56] [Output] : ★ -ed in the typical reverse installation procedure. ((Julio Lopez))
- [2015-10-26 21:34:09] [Output] : ★ Julio Lopez reaches into the vehicle's driver seat - placing the key into the ignition as he turns it on
- [2015-10-26 21:34:12] [Output] : ★ to prime the fuel pump. ((Julio Lopez))
- [2015-10-26 21:34:20] [Output] : ★ Julio Lopez repeats this procedure a couple of times - turning it off and then on.
- [2015-10-26 21:34:49] [Output] : ★ Julio Lopez checks the vehicle hood for any leaks of the fuel as it is now primed iwth it; ensuring
- [2015-10-26 21:34:53] [Output] : ★ that no leak exists. ((Julio Lopez))
- [2015-10-26 21:35:09] [Output] : ★ Julio Lopez turns the vehicle on once more for fifteen minutes, then ensures that there are no leaks at
- [2015-10-26 21:35:10] [Output] : ★ the end. ((Julio Lopez))
- [2015-10-27 19:51:00] [Output] : ★ Ben Hopwood opens the drivers door, leans into the footwell, and pulls the lever
- [2015-10-27 19:51:07] [Output] : ★ The hood would pop open slightly ((Ben Hopwood))
- [2015-10-27 19:51:14] [Output] : ★ Max Spilner slips his left hand under the hood while holding it up with the other hand.
- [2015-10-27 19:51:38] [Output] : ★ Max Spilner pulls the lever under the hood as he starts to rise it all the way up, locking it in this -
- [2015-10-27 19:51:42] [Output] : ★ - position. ((Max Spilner))
- [2015-10-27 19:51:53] [Output] : ★ Max Spilner turns his head toward Ben as he speaks
- [2015-10-27 19:51:59] [Output] : ★ Ben Hopwood grabs the new radiator, ripping open the box
- [2015-10-27 19:52:08] [Output] : [English] Max Spilner says: Where is the new radiator? Oh good good.
- [2015-10-27 19:52:31] [Output] : ★ Ben Hopwood pulls the radiator out of the cardboard box, then slides the polystyrene protectors off the-
- [2015-10-27 19:52:36] [Output] : ★ sides of the radiator ((Ben Hopwood))
- [2015-10-27 19:53:04] [Output] : ★ Ben Hopwood puts his hand further into the cardboard box, and takes out a bag of brackets
- [2015-10-27 19:53:22] [Output] : ★ Ben Hopwood passes Max the right hand side radiator mount
- [2015-10-27 19:53:33] [Output] : [English] Ben Hopwood says: Screw that on.
- [2015-10-27 19:54:02] [Output] : ★ Max Spilner extends his left hand in order to take the radiator mount as he bends over the engine bay -
- [2015-10-27 19:54:05] [Output] : ★ Ben Hopwood walks over to the toolbox, taking out a spanner, then carrying it over to the front of the -
- [2015-10-27 19:54:08] [Output] : ★ car ((Ben Hopwood))
- [2015-10-27 19:54:24] [Output] : ★ - and slides the new radiator mount inside. ((Max Spilner))
- [2015-10-27 19:54:41] [Output] : ★ Ben Hopwood lifts the left hand side bracket into the correct position on the front of the engine bay, -
- [2015-10-27 19:54:58] [Output] : ★ and begins to take his spanner, tightening the bracket in place ((Ben Hopwood))
- [2015-10-27 19:55:03] [Output] : [English] Ben Hopwood says: Your side on?
- [2015-10-27 19:55:11] [Output] : ★ Max Spilner makes a few step back toward the toolbox as he takes a wrench before walking back to the -
- [2015-10-27 19:55:15] [Output] : ★ - car. ((Max Spilner))
- [2015-10-27 19:55:20] [Output] : [English] Max Spilner says: Not yet. Give me a minute.
- [2015-10-27 19:55:24] [Output] : [English] Ben Hopwood says: Mhm..
- [2015-10-27 19:55:29] [Output] : *Alexander Rinkk's cellphone starts to ring.*
- [2015-10-27 19:55:42] [Output] : ★ Max Spilner bends over the engine bay as he starts to slip the new bolts and screw one by one using -
- [2015-10-27 19:55:45] [Output] : ★ - his wrench. ((Max Spilner))
- [2015-10-27 19:55:48] [Output] : [English] Max Spilner says: Done.
- [2015-10-27 19:56:02] [Output] : ★ Ben Hopwood lifts up the new radiator, spinning it round in the correct orientation, lifting it up with-
- [2015-10-27 19:56:13] [Output] : ★ both hands, and holding it above the front of the engine bay ((Ben Hopwood))
- [2015-10-27 19:56:36] [Output] : ★ Ben Hopwood slowly lets the radiator down, sliding it onto the two brackets
- [2015-10-27 19:57:04] [Output] : ★ Ben Hopwood lets go of the radiator, letting it sit on the mounts
- [2015-10-27 19:57:11] [Output] : ★ Max Spilner walks toward the box as he bends over it in order to take out the new hoses with some -
- [2015-10-27 19:57:16] [Output] : ★ - metal clamps. ((Max Spilner))
- [2015-10-27 19:57:33] [Output] : ★ Ben Hopwood takes his spanner back out his pocket, and begins to secure the radiator in place.
- [2015-10-27 19:57:35] [Output] : ★ Max Spilner walks toward the front side of the car as he lies down on the ground and creeps under it.
- [2015-10-27 19:58:00] [Output] : ★ Max Spilner takes one of the new hoses with two metal clamps.
- [2015-10-27 19:58:10] [Output] : ★ Ben Hopwood looks at Max from above the engine bay, and takes the other end of the hose, slotting it on-
- [2015-10-27 19:58:15] [Output] : ★ the oulet ((Ben Hopwood))
- [2015-10-27 19:58:20] [Output] : [English] Ben Hopwood says: There ya' go.
- [2015-10-27 19:58:32] [Output] : ★ Max Spilner slips both metal clamps on the hose, one per each side as he starts to insert it -
- [2015-10-27 19:58:58] [Output] : ★ Ben Hopwood walks over to the bench, taking out a jug of coolant, and caries it back over to the radiato
- [2015-10-27 19:59:01] [Output] : ★ r ((Ben Hopwood))
- [2015-10-27 19:59:03] [Output] : ★ - into the right position, between the bottom side of the radiator and the engine. ((Max Spilner))
- [2015-10-27 19:59:39] [Output] : ★ Max Spilner takes out a flat screwdriver from his right pocket as he starts to tie both metal clamps -
- [2015-10-27 19:59:45] [Output] : ★ - before moving out from under the car. ((Max Spilner))
- [2015-10-27 19:59:48] [Output] : ★ Ben Hopwood unscrews the top of the radiator cap with his left hand, and begins to pour the jug of -
- [2015-10-27 19:59:52] [Output] : [English] Max Spilner says: Ben, bottom side done.
- [2015-10-27 20:00:02] [Output] : *Ben Hopwood receives a text message.
- [2015-10-27 20:00:02] [Output] : [English] SMS from Dean B. Taylor at ClassWerks: If you don't come and solve my damn wage, I'll quit..
- [2015-10-27 20:00:11] [Output] : ★ coolant into the top of the radiator ((Ben Hopwood))
- [2015-10-27 20:00:17] [Output] : [English] Ben Hopwood says: Good, so it won't piss out for now
- [2015-10-27 20:00:26] [Output] : [English] Ben Hopwood says: Best tighten the top clamp...
- [2015-10-27 20:01:07] [Output] : ★ Max Spilner makes a few step toward the front of the car as starts to tie both metal clamps -
- [2015-10-27 20:01:19] [Output] : ★ - on the upper radiator's hose. ((Max Spilner))
- [2015-10-27 20:11:16] [Output] : ★ Ben Hopwood places his right hand on the ramp, twisting the dial to the right
- [2015-10-27 20:11:27] [Output] : ★ The ramp would begin to raise, along with the car ((Ben Hopwood))
- [2015-10-27 20:11:31] [Output] : You picked up a Lift Remote.
- [2015-10-27 20:11:31] [Output] : *Ben Hopwood bends over and picks up a Lift Remote.*
- [2015-10-27 20:11:35] [Output] : *Ben Hopwood presses the button on the ramp controls raising the car lift*
- [2015-10-27 20:12:08] [Output] : ★ Ben Hopwood walks underneath the car, looking up at the rear differential
- [2015-10-27 20:12:30] [Output] : ★ There would be 3 bolts holding the two axle shafts to the housing, then 5 bolts holding the- ((Ben Hopwood))
- [2015-10-27 20:12:41] [Output] : ★ driveshaft to the differential ((Ben Hopwood))
- [2015-10-27 20:12:52] [Output] : ★ Max Spilner walks toward the other side of the shop in order to take a jack stand before walking back -
- [2015-10-27 20:13:06] [Output] : ★ - and pushing the jack stand under the car. ((Max Spilner))
- [2015-10-27 20:13:30] [Output] : ★ Ben Hopwood walks over to the toolbox, taking out a 15MM socket and rachet, and walks back underneath t-
- [2015-10-27 20:13:48] [Output] : ★ Max Spilner walks towards the work table as he takes a few wrenches before moving back under the car.
- [2015-10-27 20:13:56] [Output] : ★ he car, placing the socket onto the axle shaft bolts, and begins to untighten all three ((Ben Hopwood))
- [2015-10-27 20:14:15] [Output] : ★ The left axle shaft would become loose, dropping down slightly ((Ben Hopwood))
- [2015-10-27 20:14:23] [Output] : ★ Max Spilner moves the jack stand right under the differential, in order to prevent it falling on the -
- [2015-10-27 20:14:26] [Output] : ★ - ground. ((Max Spilner))
- [2015-10-27 20:14:51] [Output] : ★ Some of the strain would now be taken by the jack ((Ben Hopwood))
- [2015-10-27 20:15:19] [Output] : ★ Ben Hopwood then walks over to the right side of the car, lifting his socket up, and pulling all of his-
- [2015-10-27 20:15:29] [Output] : ★ Max Spilner starts to unscrew all the five bolts on the driveshaft using his wrench, before starting -
- [2015-10-27 20:15:37] [Output] : ★ weight into untightening the 3 axle shaft bolts, before throwing them onto the floor ((Ben Hopwood))
- [2015-10-27 20:15:52] [Output] : ★ - to slip out both U-joint. ((Max Spilner))
- [2015-10-27 20:15:56] [Output] : ★ The differential would now be supported by the jack ((Ben Hopwood))
- [2015-10-27 20:16:15] [Output] : ★ Ben Hopwood places his right hand onto the differential, ensuring that it won't fall off the jack, befo=
- [2015-10-27 20:16:21] [Output] : ★ re letting the jack down slowly ((Ben Hopwood))
- [2015-10-27 20:16:36] [Output] : ★ Max Spilner puts the wrench in his left pocket as he starts to move the driveshaft with both hands in -
- [2015-10-27 20:16:47] [Output] : ★ - order to disconnect it from the differential. ((Max Spilner))
- [2015-10-27 20:17:09] [Output] : ★ Ben Hopwood pushes the jack over to the scrap area, letting the differential fall into the 'Metal' pile
- [2015-10-27 20:17:28] [Output] : ★ Ben Hopwood then pushes the jack over to the car, bending down at the new differential
- [2015-10-27 20:17:51] [Output] : ★ Ben Hopwood places both hands onto the differential, in an attempt to lift it onto the jack
- [2015-10-27 20:18:14] [Output] : ★ Ben Hopwood holds onto the differential, securing it whilst pushing the jack underneath the car
- [2015-10-27 20:18:24] [Output] : ★ Ben Hopwood pumps the jack up with his right foot
- [2015-10-27 20:18:27] [Output] : [English] Ben Hopwood says: Got it?
- [2015-10-27 20:18:30] [Output] : ★ Max Spilner nods
- [2015-10-27 20:19:02] [Output] : ★ Ben Hopwood lifts up the left side of the axle shaft, and slots it into the housing, aligning the bolt -
- [2015-10-27 20:19:03] [Output] : ★ Max Spilner attemps to fit the driveshaft into the new differential while holding it with both hands.
- [2015-10-27 20:19:08] [Output] : ★ holes ((Ben Hopwood))
- [2015-10-27 20:19:42] [Output] : ★ Ben Hopwood takes the packet of new bolts that are taped to the differential, and opens them
- [2015-10-27 20:19:45] [Output] : ★ Max Spilner starts to slide both previously removed U-joint, ensuring them in place.
- [2015-10-27 20:20:07] [Output] : ★ Max Spilner takes out from the left pocket the previously used wrench as he starts to slide in all the -
- [2015-10-27 20:20:17] [Output] : ★ Ben Hopwood takes the six bolts out, sliding them through the axel shaft and the axle housing, tighteni-
- [2015-10-27 20:20:26] [Output] : ★ ng them briefly with his hands ((Ben Hopwood))
- [2015-10-27 20:20:44] [Output] : ★ - five bolts, tighten them with his wrench. ((Max Spilner))
- [2015-10-27 20:20:45] [Output] : ★ Ben Hopwood then takes the 15MM Spanner out of his pocket, and tightens them fully, with all of his st-
- [2015-10-27 20:20:51] [Output] : ★ rength ((Ben Hopwood))
- [2015-10-27 20:21:10] [Output] : ★ The differential would now be secured by the shafts ((Ben Hopwood))
- [2015-10-27 20:21:16] [Output] : [English] Max Spilner says: Ten dollars ticket for the show boy. *chuckles*
- [2015-10-27 20:21:24] [Output] : ★ Ben Hopwood lets the jack down, pushing it to the wall
- [2015-10-27 20:21:27] [Output] : [English] Ben Hopwood says: All good.
- [2015-10-27 20:01:27] [Output] : [English] Max Spilner says: All good here.
- [2015-10-27 20:01:30] [Output] : [English] Ben Hopwood says: Good timing
- [2015-10-27 20:01:52] [Output] : ★ The jug would finally empty, and the coolant would be visible from the radiator ((Ben Hopwood))
- [2015-10-27 20:01:55] [Output] : [English] Ben Hopwood says: Just enough
- [2015-10-27 20:02:16] [Output] : ★ Ben Hopwood removes the jug, and throws it into the trashcan, as he takes the cap, screwing it back ont-
- [2015-10-27 20:02:21] [Output] : ★ o the top of the radiator ((Ben Hopwood))
- [2015-10-27 20:02:25] [Output] : [English] Ben Hopwood says: All good.
Add Comment
Please, Sign In to add comment