API tools faq
paste
Advertisement
jneonn

KernelLog

jneonn
Nov 20th, 2021
48
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.54 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 5.4.154 (user@arinc9) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16325-88151b8303)) #0 SMP Sun Oct 24 09:01:35 2021
  3. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt: Machine model: Asus RT-AC88U
  6. [ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '115200n8')
  7. [ 0.000000] printk: bootconsole [ns16550] enabled
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
  10. [ 0.000000] On node 0 totalpages: 131072
  11. [ 0.000000] Normal zone: 288 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  14. [ 0.000000] HighMem zone: 98304 pages, LIFO batch:31
  15. [ 0.000000] percpu: Embedded 14 pages/cpu s26700 r8192 d22452 u57344
  16. [ 0.000000] pcpu-alloc: s26700 r8192 d22452 u57344 alloc=14*4096
  17. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  18. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784
  19. [ 0.000000] Kernel command line: earlycon
  20. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  21. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  22. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  23. [ 0.000000] Memory: 510748K/524288K available (5058K kernel code, 148K rwdata, 1272K rodata, 1024K init, 280K bss, 13540K reserved, 0K cma-reserved, 393216K highmem)
  24. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  25. [ 0.000000] rcu: Hierarchical RCU implementation.
  26. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  27. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  28. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
  29. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  30. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  31. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  32. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  33. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  34. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  35. [ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x4a0 with crng_init=0
  36. [ 0.000007] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
  37. [ 0.016399] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
  38. [ 0.027513] Switching to timer-based delay loop, resolution 1ns
  39. [ 0.033651] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
  40. [ 0.044407] pid_max: default: 32768 minimum: 301
  41. [ 0.049156] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [ 0.056537] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  43. [ 0.064876] CPU: Testing write buffer coherency: ok
  44. [ 0.069821] CPU0: Spectre v2: using BPIALL workaround
  45. [ 0.075173] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  46. [ 0.081260] Setting up static identity map for 0x100000 - 0x10003c
  47. [ 0.087636] rcu: Hierarchical SRCU implementation.
  48. [ 0.092670] smp: Bringing up secondary CPUs ...
  49. [ 0.097831] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  50. [ 0.097838] CPU1: Spectre v2: using BPIALL workaround
  51. [ 0.108702] smp: Brought up 1 node, 2 CPUs
  52. [ 0.112818] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
  53. [ 0.119234] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
  54. [ 0.127748] CPU: This may indicate a broken bootloader or firmware.
  55. [ 0.135940] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  56. [ 0.145927] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  57. [ 0.152914] pinctrl core: initialized pinctrl subsystem
  58. [ 0.158456] NET: Registered protocol family 16
  59. [ 0.163496] DMA: preallocated 256 KiB pool for atomic coherent allocations
  60. [ 0.181273] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  61. [ 0.194099] clocksource: Switched to clocksource arm_global_timer
  62. [ 0.200819] thermal_sys: Registered thermal governor 'step_wise'
  63. [ 0.201237] NET: Registered protocol family 2
  64. [ 0.211889] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  65. [ 0.219622] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  66. [ 0.228102] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  67. [ 0.235863] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  68. [ 0.242995] TCP: Hash tables configured (established 1024 bind 1024)
  69. [ 0.249498] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  70. [ 0.256074] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  71. [ 0.263245] NET: Registered protocol family 1
  72. [ 0.267656] PCI: CLS 0 bytes, default 64
  73. [ 0.272740] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  74. [ 0.282162] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  75. [ 0.288305] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  76. [ 0.299272] bounce: pool size: 64 pages
  77. [ 0.304223] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  78. [ 0.311203] printk: console [ttyS0] disabled
  79. [ 0.315576] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
  80. [ 0.324445] printk: console [ttyS0] enabled
  81. [ 0.332860] printk: bootconsole [ns16550] disabled
  82. [ 0.343090] bcm2835-rng 18004000.rng: hwrng registered
  83. [ 0.992917] random: fast init done
  84. [ 0.996375] random: crng init done
  85. [ 1.001175] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
  86. [ 1.007548] nand: ESMT NAND 128MiB 3,3V 8-bit
  87. [ 1.011944] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  88. [ 1.019559] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
  89. [ 1.029513] Scanning device for bad blocks
  90. [ 2.108463] 3 fixed-partitions partitions found on MTD device brcmnand.0
  91. [ 2.115184] Creating 3 MTD partitions on "brcmnand.0":
  92. [ 2.120351] 0x000000000000-0x000000080000 : "boot"
  93. [ 2.125641] 0x000000080000-0x000000200000 : "nvram"
  94. [ 2.130975] 0x000000200000-0x000008000000 : "firmware"
  95. [ 2.137666] 2 trx partitions found on MTD device firmware
  96. [ 2.143109] Creating 2 MTD partitions on "firmware":
  97. [ 2.148103] 0x00000000001c-0x000000400000 : "linux"
  98. [ 2.153645] 0x000000400000-0x000007e00000 : "ubi"
  99. [ 2.159608] bcm_iproc 18029200.spi: using bspi-mspi mode
  100. [ 2.165867] libphy: iProc MDIO bus: probed
  101. [ 2.170022] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus at 0x13f0e2c4
  102. [ 2.177249] libphy: mdio_mux: probed
  103. [ 2.181473] libphy: Fixed MDIO Bus: probed
  104. [ 2.185774] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p0 not found
  105. [ 2.193299] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p1 not found
  106. [ 2.200805] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p2 not found
  107. [ 2.208312] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p3 not found
  108. [ 2.215811] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p4 not found
  109. [ 2.223310] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p5 not found
  110. [ 2.230813] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p7 not found
  111. [ 2.238314] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p8 not found
  112. [ 2.245847] b53_common: found switch: BCM53012, rev 0
  113. [ 2.251064] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  114. [ 2.257117] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
  115. [ 2.266097] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  116. [ 2.276675] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  117. [ 2.276684] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
  118. [ 2.287426] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  119. [ 2.287433] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
  120. [ 2.297410] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  121. [ 2.307814] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  122. [ 2.318213] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  123. [ 2.328612] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  124. [ 2.338967] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  125. [ 2.349513] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  126. [ 2.360058] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  127. [ 2.370616] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  128. [ 2.370623] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
  129. [ 2.382652] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
  130. [ 2.393032] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
  131. [ 2.403420] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  132. [ 2.403428] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  133. [ 2.413642] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  134. [ 2.413650] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
  135. [ 2.423679] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  136. [ 2.423686] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  137. [ 2.435023] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  138. [ 2.435029] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  139. [ 2.447753] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  140. [ 2.447759] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
  141. [ 2.457815] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  142. [ 2.469413] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  143. [ 2.469421] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  144. [ 2.480859] bcma-host-soc 18000000.axi: bus0: Flash type not supported
  145. [ 2.498188] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
  146. [ 2.498417] bgmac_bcma bcma0:3: Found PHY addr: 0
  147. [ 2.503140] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
  148. [ 2.509700] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
  149. [ 2.515981] bgmac_bcma bcma0:3: Using random MAC: d6:e0:db:21:35:f2
  150. [ 2.522894] b53-srab-switch b53-srab-switch: invalid resource
  151. [ 2.528686] b53-srab-switch: probe of b53-srab-switch failed with error -12
  152. [ 2.536259] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
  153. [ 2.541880] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
  154. [ 2.549511] bgmac_bcma bcma0:5: Found PHY addr: 0
  155. [ 2.554241] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
  156. [ 2.560820] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
  157. [ 2.567108] bgmac_bcma bcma0:5: Using random MAC: 92:c4:84:f1:dc:26
  158. [ 2.574497] bgmac_bcma bcma0:6: Unsupported core_unit 3
  159. [ 2.579809] bgmac_bcma: probe of bcma0:6 failed with error -524
  160. [ 2.707840] pcie_iproc_bcma bcma0:7: link: UP
  161. [ 2.712296] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
  162. [ 2.718598] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  163. [ 2.725492] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  164. [ 2.733452] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
  165. [ 2.739486] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  166. [ 2.749163] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  167. [ 2.758848] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  168. [ 2.768615] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  169. [ 2.778388] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  170. [ 2.788180] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  171. [ 2.794289] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
  172. [ 2.804820] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  173. [ 2.814600] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  174. [ 2.824278] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
  175. [ 2.833954] PCI: bus0: Fast back to back transfers disabled
  176. [ 2.839543] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  177. [ 2.847566] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  178. [ 2.857437] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
  179. [ 2.863503] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  180. [ 2.870321] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
  181. [ 2.877218] pci 0000:01:00.0: supports D1 D2
  182. [ 2.882218] PCI: bus1: Fast back to back transfers disabled
  183. [ 2.887809] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  184. [ 2.894451] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  185. [ 2.901095] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
  186. [ 2.907916] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
  187. [ 2.915248] pci 0000:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
  188. [ 2.922590] pci 0000:00:00.0: PCI bridge to [bus 01]
  189. [ 2.927564] pci 0000:00:00.0: bridge window [mem 0x08000000-0x085fffff]
  190. [ 3.057839] pcie_iproc_bcma bcma0:8: link: UP
  191. [ 3.062276] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
  192. [ 3.068575] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
  193. [ 3.075462] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  194. [ 3.083420] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
  195. [ 3.089497] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
  196. [ 3.096343] PCI: bus0: Fast back to back transfers disabled
  197. [ 3.101950] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  198. [ 3.110080] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
  199. [ 3.116137] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  200. [ 3.122961] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
  201. [ 3.129864] pci 0001:01:00.0: supports D1 D2
  202. [ 3.134864] PCI: bus1: Fast back to back transfers disabled
  203. [ 3.140476] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  204. [ 3.147109] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
  205. [ 3.153763] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x205fffff]
  206. [ 3.160579] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x203fffff 64bit]
  207. [ 3.167923] pci 0001:01:00.0: BAR 0: assigned [mem 0x20400000-0x20407fff 64bit]
  208. [ 3.175251] pci 0001:00:00.0: PCI bridge to [bus 01]
  209. [ 3.180229] pci 0001:00:00.0: bridge window [mem 0x20000000-0x205fffff]
  210. [ 3.307837] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
  211. [ 3.314038] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
  212. [ 3.319980] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
  213. [ 3.326862] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  214. [ 3.335905] bcma-host-soc 18000000.axi: bus0: Bus registered
  215. [ 3.342376] NET: Registered protocol family 10
  216. [ 3.347714] Segment Routing with IPv6
  217. [ 3.351480] NET: Registered protocol family 17
  218. [ 3.356095] 8021q: 802.1Q VLAN Support v1.8
  219. [ 3.360355] Registering SWP/SWPB emulation handler
  220. [ 3.368084] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p0 not found
  221. [ 3.375597] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p1 not found
  222. [ 3.383126] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p2 not found
  223. [ 3.390632] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p3 not found
  224. [ 3.398132] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p4 not found
  225. [ 3.405631] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p5 not found
  226. [ 3.413134] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p7 not found
  227. [ 3.420640] b53-srab-switch 18007000.ethernet-switch: IRQ link_state_p8 not found
  228. [ 3.428180] b53_common: found switch: BCM53012, rev 0
  229. [ 3.648023] libphy: dsa slave smi: probed
  230. [ 3.677857] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
  231. [ 3.717859] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
  232. [ 3.757852] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
  233. [ 3.797857] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
  234. [ 3.837853] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
  235. [ 3.849066] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
  236. [ 3.859577] DSA: tree 0 setup
  237. [ 3.862802] UBI: auto-attach mtd4
  238. [ 3.866137] ubi0: attaching mtd4
  239. [ 4.363881] ubi0: scanning is finished
  240. [ 4.402441] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 921 LEBs
  241. [ 4.409439] ubi0: attached mtd4 (name "ubi", size 122 MiB)
  242. [ 4.414946] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  243. [ 4.421841] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  244. [ 4.428649] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  245. [ 4.435625] ubi0: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
  246. [ 4.441642] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  247. [ 4.448884] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1635066095
  248. [ 4.458041] ubi0: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB handling: 20
  249. [ 4.467314] ubi0: background thread "ubi_bgt0d" started, PID 503
  250. [ 4.474140] block ubiblock0_0: created from ubi0:0(rootfs)
  251. [ 4.479679] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  252. [ 4.498521] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  253. [ 4.506443] Freeing unused kernel memory: 1024K
  254. [ 4.533642] Run /sbin/init as init process
  255. [ 4.859841] init: Console is alive
  256. [ 4.863523] init: - watchdog -
  257. [ 5.128448] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  258. [ 5.202447] usbcore: registered new interface driver usbfs
  259. [ 5.208029] usbcore: registered new interface driver hub
  260. [ 5.213403] usbcore: registered new device driver usb
  261. [ 5.221322] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  262. [ 5.228549] ehci-fsl: Freescale EHCI Host controller driver
  263. [ 5.234883] ehci-platform: EHCI generic platform driver
  264. [ 5.243083] ehci-platform 18021000.usb: EHCI Host Controller
  265. [ 5.248878] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
  266. [ 5.249630] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  267. [ 5.256933] ehci-platform 18021000.usb: irq 37, io mem 0x18021000
  268. [ 5.264020] ohci-platform: OHCI generic platform driver
  269. [ 5.274675] ohci-platform 18022000.usb: Generic Platform OHCI controller
  270. [ 5.281462] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
  271. [ 5.289418] ohci-platform 18022000.usb: irq 37, io mem 0x18022000
  272. [ 5.298738] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
  273. [ 5.305452] hub 1-0:1.0: USB hub found
  274. [ 5.309367] hub 1-0:1.0: 2 ports detected
  275. [ 5.368014] hub 2-0:1.0: USB hub found
  276. [ 5.371861] hub 2-0:1.0: 2 ports detected
  277. [ 5.483546] xhci-hcd 18023000.usb: xHCI Host Controller
  278. [ 5.488828] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
  279. [ 5.496483] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000001000010010
  280. [ 5.505699] xhci-hcd 18023000.usb: irq 38, io mem 0x18023000
  281. [ 5.511530] xhci-hcd 18023000.usb: xHCI Host Controller
  282. [ 5.516803] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
  283. [ 5.524238] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
  284. [ 5.533984] hub 3-0:1.0: USB hub found
  285. [ 5.537784] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
  286. [ 5.545184] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  287. [ 5.553723] hub 4-0:1.0: USB hub found
  288. [ 5.557526] hub 4-0:1.0: 1 port detected
  289. [ 5.563515] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  290. [ 5.588029] init: - preinit -
  291. [ 8.892450] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
  292. [ 8.901078] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
  293. [ 8.908521] 8021q: adding VLAN 0 to HW filter on device lan1
  294. [ 8.987847] b53-srab-switch 18007000.ethernet-switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  295. [ 8.998140] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  296. [ 9.004557] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
  297. [ 13.156577] UBIFS (ubi0:1): default file-system created
  298. [ 13.162511] UBIFS (ubi0:1): Mounting in unauthenticated mode
  299. [ 13.168314] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 658
  300. [ 13.232045] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  301. [ 13.239925] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  302. [ 13.249869] UBIFS (ubi0:1): FS size: 115548160 bytes (110 MiB, 910 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
  303. [ 13.260502] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  304. [ 13.267136] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID -----, small LPT model
  305. [ 13.280220] mount_root: overlay filesystem has not been fully initialized yet
  306. [ 13.287659] mount_root: switching to ubifs overlay
  307. [ 13.296291] urandom-seed: Seed file not found (/etc/urandom.seed)
  308. [ 13.334917] b53-srab-switch 18007000.ethernet-switch lan1: Link is Down
  309. [ 13.451244] procd: - early -
  310. [ 13.454265] procd: - watchdog -
  311. [ 13.993623] procd: - watchdog -
  312. [ 14.030629] procd: - ubus -
  313. [ 14.095019] procd: - init -
  314. [ 14.374212] kmodloader: loading kernel modules from /etc/modules.d/*
  315. [ 14.401632] urngd: v1.0.2 started.
  316. [ 14.425251] Loading modules backported from Linux version v5.10.68-0-g4d8524048a35
  317. [ 14.432847] Backport generated by backports.git v5.10.68-1-0-ga4f9ba32
  318. [ 14.453420] xt_time: kernel timezone is -0000
  319. [ 14.472835] PPP generic driver version 2.4.2
  320. [ 14.478046] NET: Registered protocol family 24
  321. [ 14.490624] usbcore: registered new interface driver brcmfmac
  322. [ 14.496557] pci_generic_config_write32: 46 callbacks suppressed
  323. [ 14.496568] pci_bus 0000:01: 1-byte config write to 0000:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
  324. [ 14.512292] pci 0000:00:00.0: enabling device (0140 -> 0142)
  325. [ 14.517984] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  326. [ 14.527674] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  327. [ 14.537378] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
  328. [ 14.543487] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  329. [ 14.553177] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  330. [ 14.727891] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366b-pcie for chip BCM4366/3
  331. [ 14.736674] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366b-pcie.bin failed with error -2
  332. [ 19.798033] pci_bus 0001:01: 1-byte config write to 0001:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
  333. [ 19.807808] pci 0001:00:00.0: enabling device (0140 -> 0142)
  334. [ 19.813500] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  335. [ 19.823184] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  336. [ 19.832868] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
  337. [ 19.838976] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  338. [ 19.848659] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  339. [ 20.027873] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  340. [ 20.037858] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366b-pcie for chip BCM4366/3
  341. [ 20.046559] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366b-pcie.bin failed with error -2
  342. [ 25.080068] kmodloader: done loading kernel modules from /etc/modules.d/*
  343. [ 25.247875] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  344. [ 36.226913] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
  345. [ 36.241218] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
  346. [ 36.263832] 8021q: adding VLAN 0 to HW filter on device lan1
  347. [ 36.343883] br-lan: port 1(lan1) entered blocking state
  348. [ 36.349144] br-lan: port 1(lan1) entered disabled state
  349. [ 36.354776] device lan1 entered promiscuous mode
  350. [ 36.359425] device eth1 entered promiscuous mode
  351. [ 36.364498] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  352. [ 36.404204] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
  353. [ 36.416318] 8021q: adding VLAN 0 to HW filter on device lan2
  354. [ 36.494216] br-lan: port 2(lan2) entered blocking state
  355. [ 36.499482] br-lan: port 2(lan2) entered disabled state
  356. [ 36.505129] device lan2 entered promiscuous mode
  357. [ 36.536436] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
  358. [ 36.553759] 8021q: adding VLAN 0 to HW filter on device lan3
  359. [ 36.633924] br-lan: port 3(lan3) entered blocking state
  360. [ 36.639187] br-lan: port 3(lan3) entered disabled state
  361. [ 36.644883] device lan3 entered promiscuous mode
  362. [ 36.675191] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
  363. [ 36.693837] 8021q: adding VLAN 0 to HW filter on device lan4
  364. [ 36.773791] br-lan: port 4(lan4) entered blocking state
  365. [ 36.779037] br-lan: port 4(lan4) entered disabled state
  366. [ 36.784591] device lan4 entered promiscuous mode
  367. [ 36.815072] b53-srab-switch 18007000.ethernet-switch extsw: configuring for fixed/ link mode
  368. [ 36.823696] 8021q: adding VLAN 0 to HW filter on device extsw
  369. [ 36.829531] b53-srab-switch 18007000.ethernet-switch extsw: Link is Up - 1Gbps/Full - flow control off
  370. [ 36.883779] br-lan: port 5(extsw) entered blocking state
  371. [ 36.889105] br-lan: port 5(extsw) entered disabled state
  372. [ 36.894761] device extsw entered promiscuous mode
  373. [ 36.899655] br-lan: port 5(extsw) entered blocking state
  374. [ 36.905010] br-lan: port 5(extsw) entered forwarding state
  375. [ 36.933636] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  376. [ 36.944183] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
  377. [ 36.958024] 8021q: adding VLAN 0 to HW filter on device wan
  378. [ 39.523559] b53-srab-switch 18007000.ethernet-switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  379. [ 39.533004] br-lan: port 1(lan1) entered blocking state
  380. [ 39.538260] br-lan: port 1(lan1) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!