springs

[2017-11-04 17:24:19] [Output] : ★ Lukas Ruiz reaches for the shelf behind him, grasping a toolbox with his right hand, upon dragging it-
[2017-11-04 17:24:24] [Output] : ★ towards the car.      ((Lukas Ruiz))
[2017-11-04 17:24:47] [Output] : ★ Lukas Ruiz slips out a torque wrench from inside, as he would slide it on one of the 4 nuts on-
[2017-11-04 17:24:51] [Output] : ★ the VAZ's wheel.      ((Lukas Ruiz))
[2017-11-04 17:25:01] [Output] : ★ Lukas Ruiz twists it counter-clockwise, loosening the nut.
[2017-11-04 17:25:11] [Output] : ★ Lukas Ruiz repeats the process for the other 3, loosening the wheel completely.
[2017-11-04 17:26:36] [Output] : ★ Lukas Ruiz pulls the wheel off with both hands, storing it next to the wall, behind him.
[2017-11-04 17:26:55] [Output] : ★ Lukas Ruiz inspects the wheel bay, as he would stand back up.
[2017-11-04 17:27:09] [Output] : ★ Lukas Ruiz walks back towards the shelf, dragging an air compressor from it.
[2017-11-04 17:27:23] [Output] : ★ Lukas Ruiz plugs it into the electricity, turning it on.
[2017-11-04 17:27:45] [Output] : ★ Lukas Ruiz sprays the air onto the wheel hub, front left one, cleaning out the dirt and other dirtiness
[2017-11-04 17:27:51] [Output] : ★ from it.      ((Lukas Ruiz))
[2017-11-04 17:27:58] [Output] : Lukas Ruiz: (( wheel bay* ))
[2017-11-04 17:28:26] [Output] : ★ Lukas Ruiz then grasps a grinder from the toolbox next to him, flicking it on, on low rpms.
[2017-11-04 17:28:49] [Output] : ★ Lukas Ruiz checks if anything would be standing it on the way, next to the spring, as he would-
[2017-11-04 17:28:58] [Output] : ★ then flick the grinder to almost full power.      ((Lukas Ruiz))
[2017-11-04 17:29:20] [Output] : ★ Lukas Ruiz starts grinding the spring, experimenting all sorts of angles, so he cuts it evenly.
[2017-11-04 17:29:37] [Output] : ★ As he would be done cutting, he would have cut 3 rings on the front spring.      ((Lukas Ruiz))
[2017-11-04 17:29:51] [Output] : ★ Lukas Ruiz adjusts the spring back to it's place, rotating it it place.
[2017-11-04 17:30:08] [Output] : ★ Lukas Ruiz doubles checks if it's in place, as he would consider it done, afterwards.
[2017-11-04 17:30:50] [Output] : ★ As the spring would be cut, he would grasp back the old steel wheel, sliding it in place.      ((Lukas Ruiz))
[2017-11-04 17:31:05] [Output] : ★ Lukas Ruiz mounts on the 4 nuts, tightening these with the torque wrench onto the hub, following-
[2017-11-04 17:31:10] [Output] : ★ a star pattern.      ((Lukas Ruiz))
[2017-11-04 17:31:30] [Output] : ★ The wheel would be secure and aligned.      ((Lukas Ruiz))
[2017-11-04 17:32:00] [Output] : ★ Lukas Ruiz stands back up, as one side would be done, grasping all the tools upon dragging-
[2017-11-04 17:32:06] [Output] : ★ them to the other side of the wagon.      ((Lukas Ruiz))
[2017-11-04 17:32:23] [Output] : ★ Lukas Ruiz crouches next to the wheel, proceeding to untighten the 4 nuts on the wheel.
[2017-11-04 17:32:43] [Output] : ★ Lukas Ruiz pulls all the nuts outwards, aswell as the wheel, laying it on the ground behind him.
[2017-11-04 17:33:02] [Output] : ★ Lukas Ruiz wipes the dirt off with the air compressor once again, being carful not to damage the-
[2017-11-04 17:33:12] [Output] : ★ brake disk anymore, which would obviously need a replacement.      ((Lukas Ruiz))
[2017-11-04 17:33:49] [Output] : ★ Lukas Ruiz clears the once-upon-a-time-red spring of dirt and superficial rust, as he would grasp-
[2017-11-04 17:33:53] [Output] : ★ back the grinder.      ((Lukas Ruiz))
[2017-11-04 17:34:17] [Output] : ★ Lukas Ruiz flicks it off at low rpms, then pulling it almost to max throttle, as he would carefully-
[2017-11-04 17:34:28] [Output] : ★ start grinding the old spring.      ((Lukas Ruiz))
[2017-11-04 17:35:08] [Output] : ★ Lukas Ruiz chops off the same 3 rings he did on the other side, to level the ride height.
[2017-11-04 17:35:27] [Output] : ★ Lukas Ruiz rotates it in place, mounting it correctly on the steel plate.
[2017-11-04 17:35:44] [Output] : ★ As this one would be done, Lukas would double check once again, making sure the-      ((Lukas Ruiz))
[2017-11-04 17:35:52] [Output] : ★ job was done as good as possible.      ((Lukas Ruiz))
[2017-11-04 17:36:05] [Output] : ★ Lukas Ruiz then grasps back the wheel, sliding it on the hub and securing it with the 4 original-
[2017-11-04 17:36:13] [Output] : ★ nuts, with the help of the torque wrench.      ((Lukas Ruiz))
[2017-11-04 17:36:26] [Output] : ★ Lukas Ruiz now moves towards the back of the car, same sides, dragging the tools there.
[2017-11-04 17:36:56] [Output] : ★ Lukas Ruiz slides the torque on one of the wheels nuts, rotating it counter-clockwise, loosening it.
[2017-11-04 17:37:06] [Output] : ★ Lukas Ruiz repeats the process for the other 3 nuts, pulling the wheel off.
[2017-11-04 17:37:52] [Output] : ★ Lukas Ruiz stores it behind him, laying it on the ground, as he would grasp the air compressor's-
[2017-11-04 17:38:35] [Output] : ★ spray pistol, cleaning out the dirtyness.      ((Lukas Ruiz))
[2017-11-04 17:39:11] [Output] : ★ Lukas Ruiz grasps back the grinder, flicking it on, as he would chop off two of the springs' rings,t
[2017-11-04 17:39:27] [Output] : ★ leaving it roughly 4 or 5 centimeters lower.      ((Lukas Ruiz))
[2017-11-04 17:39:54] [Output] : ★ Lukas Ruiz scans the cut spring quickly, grasping it with both hands, upon sliding it in place,
[2017-11-04 17:40:00] [Output] : ★ making sure it's completely secure.      ((Lukas Ruiz))
[2017-11-04 17:40:34] [Output] : ★ Lukas Ruiz then grasps back the wheel, sliding it on the hub, along with the nuts.
[2017-11-04 17:41:08] [Output] : ★ Lukas Ruiz tightens them following a star pattern, tightening the wheel in place.
[2017-11-04 17:42:28] [Output] : ★ Lukas Ruiz moves towards the other side of the car, along with the tools, laying them next to him,
[2017-11-04 17:42:31] [Output] : ★ on the floor.      ((Lukas Ruiz))
[2017-11-04 17:43:08] [Output] : ★ Lukas Ruiz grasps a torque wrench, untightening the 4 nuts holding the wheel in place and onto-
[2017-11-04 17:43:11] [Output] : ★ the hub.      ((Lukas Ruiz))
[2017-11-04 17:43:20] [Output] : ★ Lukas Ruiz pulls them off, along with the wheel, dropping them on the ground next to him.
[2017-11-04 17:44:21] [Output] : ★ Lukas Ruiz cleans the wheel bay with the air compressor, leaving it with much less dirt than-
[2017-11-04 17:44:24] [Output] : ★ it had before.      ((Lukas Ruiz))
[2017-11-04 17:44:43] [Output] : ★ Lukas Ruiz then reaches out for the grinder, as he would cut off 2 rings off of the spring,
[2017-11-04 17:45:05] [Output] : ★ leveling it with the other side moreless, only, and if, 1 or 2 mm of error.      ((Lukas Ruiz))
[2017-11-04 17:45:30] [Output] : ★ Lukas Ruiz then rotates this one in place, securing it onto the steel plate, checking for the stability
[2017-11-04 17:45:47] [Output] : ★ As everything seemed fine, he would grasp back the wheel and nuts, sliding the wheel-      ((Lukas Ruiz))
[2017-11-04 17:46:02] [Output] : ★ onto the hub, aswell as the nuts, tightening them following a star pattern,      ((Lukas Ruiz))
[2017-11-04 17:46:09] [Output] : ★ with the help of the torque wrench.      ((Lukas Ruiz))