Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F3
- Device Model: SAMSUNG HD103SJ
- Serial Number: S246J9BZ616699
- LU WWN Device Id: 5 0024e9 202be8cce
- Firmware Version: 1AJ10001
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Feb 10 05:23:44 2021 PST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 9240) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 154) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 24255
- 2 Throughput_Performance -OS--K 252 252 000 - 0
- 3 Spin_Up_Time PO---K 070 069 025 - 9118
- 4 Start_Stop_Count -O--CK 094 094 000 - 6240
- 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
- 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
- 8 Seek_Time_Performance --S--K 252 252 015 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 24472
- 10 Spin_Retry_Count -O--CK 252 252 051 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 17
- 12 Power_Cycle_Count -O--CK 094 094 000 - 6268
- 191 G-Sense_Error_Rate -O---K 100 100 000 - 269
- 192 Power-Off_Retract_Count -O---K 252 252 000 - 0
- 194 Temperature_Celsius -O---- 064 060 000 - 31 (Min/Max 6/40)
- 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
- 196 Reallocated_Event_Count -O--CK 252 252 000 - 0
- 197 Current_Pending_Sector -O--CK 100 100 000 - 1
- 198 Offline_Uncorrectable ----CK 252 252 000 - 0
- 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 442
- 223 Load_Retry_Count -O--CK 100 100 000 - 17
- 225 Load_Cycle_Count -O--CK 100 100 000 - 6304
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 2 Comprehensive SMART error log
- 0x03 GPL R/O 2 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 2 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
- Device Error Count: 23157 (device log contains only the most recent 8 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 23157 [4] occurred at disk power-on lifetime: 24448 hours (1018 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 08 00 00 00 c5 e6 f8 40 00 Error: UNC at LBA = 0x00c5e6f8 = 12969720
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 08 00 00 00 c5 e6 f8 40 08 00:00:09.967 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 e6 f8 40 08 00:00:09.972 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 00 00 00 00 40 08 00:00:09.972 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 45 64 6c 3b 40 08 00:00:09.972 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 10 ac da 62 40 08 00:00:09.972 READ FPDMA QUEUED
- Error 23156 [3] occurred at disk power-on lifetime: 24448 hours (1018 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 08 00 00 00 c5 e6 f8 40 00 Error: UNC at LBA = 0x00c5e6f8 = 12969720
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 08 00 00 00 c5 e6 f8 40 08 00:00:09.965 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 e6 f8 40 08 00:00:09.970 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 e6 f0 40 08 00:00:09.970 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 e6 e8 40 08 00:00:09.970 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 e6 e0 40 08 00:00:09.970 READ FPDMA QUEUED
- Error 23155 [2] occurred at disk power-on lifetime: 24448 hours (1018 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 03 60 00 00 00 c5 e6 f8 40 00 Error: UNC at LBA = 0x00c5e6f8 = 12969720
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 05 88 00 00 00 c5 ea f8 40 08 00:00:09.970 READ FPDMA QUEUED
- 60 00 10 05 60 00 00 00 c5 e4 f8 40 08 00:00:09.964 READ FPDMA QUEUED
- 60 00 10 00 a0 00 00 00 c5 ea 58 40 08 00:00:09.969 READ FPDMA QUEUED
- 60 00 10 05 60 00 00 00 c5 e4 f8 40 08 00:00:09.969 READ FPDMA QUEUED
- 60 00 10 04 70 00 00 00 c5 e0 88 40 08 00:00:09.969 READ FPDMA QUEUED
- Error 23154 [1] occurred at disk power-on lifetime: 24448 hours (1018 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 04 00 00 00 c5 10 fc 40 00 Error: UNC at LBA = 0x00c510fc = 12914940
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 01 00 00 00 00 00 00 40 08 00:00:09.963 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 10 f8 40 08 00:00:09.962 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 10 f8 40 08 00:00:09.962 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 10 f0 40 08 00:00:09.962 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 00 c5 10 e8 40 08 00:00:09.962 READ FPDMA QUEUED
- Error 23153 [0] occurred at disk power-on lifetime: 24448 hours (1018 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 03 04 00 00 00 c5 10 fc 40 00 Error: UNC at LBA = 0x00c510fc = 12914940
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 d1 00 01 00 00 0f 52 10 10 40 08 00:00:09.961 READ FPDMA QUEUED
- 60 00 d1 04 68 00 00 00 c5 0f 98 40 08 00:00:09.954 READ FPDMA QUEUED
- 60 00 d1 00 c0 00 00 00 c5 19 40 40 08 00:00:09.960 READ FPDMA QUEUED
- 60 00 d1 05 40 00 00 00 c5 14 00 40 08 00:00:09.960 READ FPDMA QUEUED
- 60 00 d1 04 68 00 00 00 c5 0f 98 40 08 00:00:09.960 READ FPDMA QUEUED
- Error 23152 [7] occurred at disk power-on lifetime: 24440 hours (1018 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 03 00 00 14 48 cd 75 40 00 Error: UNC at LBA = 0x1448cd75 = 340315509
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 08 00 00 14 48 cd 70 40 08 00:00:08.768 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 48 cd 70 40 08 00:00:08.770 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 74 70 6d af 40 08 00:00:08.770 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 1c 16 f9 4d 40 08 00:00:08.770 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 00 00 00 00 40 08 00:00:08.770 READ FPDMA QUEUED
- Error 23151 [6] occurred at disk power-on lifetime: 24440 hours (1018 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 03 00 00 14 48 cd 75 40 00 Error: UNC at LBA = 0x1448cd75 = 340315509
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 01 00 00 74 70 6d af 40 08 00:00:08.769 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 48 cd 70 40 08 00:00:08.768 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 48 cd 70 40 08 00:00:08.768 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 48 cd 68 40 08 00:00:08.768 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 48 cd 60 40 08 00:00:08.768 READ FPDMA QUEUED
- Error 23150 [5] occurred at disk power-on lifetime: 24440 hours (1018 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 07 00 00 14 43 f8 d9 40 00 Error: UNC at LBA = 0x1443f8d9 = 339998937
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 08 00 00 14 43 f8 d8 40 08 00:00:08.763 READ FPDMA QUEUED
- 60 00 10 00 08 00 00 14 43 f8 d8 40 08 00:00:08.765 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 74 70 6d af 40 08 00:00:08.765 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 6f 49 21 a1 40 08 00:00:08.765 READ FPDMA QUEUED
- 60 00 10 00 01 00 00 01 c3 70 cd 40 08 00:00:08.765 READ FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (2 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 24472 12842083
- # 2 Extended offline Completed: read failure 90% 24472 12842083
- # 3 Extended offline Completed: read failure 90% 24458 12844274
- # 4 Extended offline Completed: read failure 90% 24449 12844274
- # 5 Extended offline Completed: read failure 90% 24430 12867282
- # 6 Extended offline Completed: read failure 90% 24430 12869473
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed_read_failure [90% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 256 (0x0100)
- Device State: Active (0)
- Current Temperature: 31 Celsius
- Power Cycle Min/Max Temperature: 24/33 Celsius
- Lifetime Min/Max Temperature: 12/61 Celsius
- Specified Max Operating Temperature: 80 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 5 minutes
- Temperature Logging Interval: 5 minutes
- Min/Max recommended Temperature: -5/80 Celsius
- Min/Max Temperature Limit: -10/85 Celsius
- Temperature History Size (Index): 128 (93)
- Index Estimated Time Temperature Celsius
- 94 2021-02-09 18:45 30 ***********
- 95 2021-02-09 18:50 30 ***********
- 96 2021-02-09 18:55 30 ***********
- 97 2021-02-09 19:00 31 ************
- ... ..( 68 skipped). .. ************
- 38 2021-02-10 00:45 31 ************
- 39 2021-02-10 00:50 30 ***********
- 40 2021-02-10 00:55 31 ************
- ... ..( 9 skipped). .. ************
- 50 2021-02-10 01:45 31 ************
- 51 2021-02-10 01:50 30 ***********
- 52 2021-02-10 01:55 31 ************
- ... ..( 8 skipped). .. ************
- 61 2021-02-10 02:40 31 ************
- 62 2021-02-10 02:45 30 ***********
- 63 2021-02-10 02:50 31 ************
- ... ..( 15 skipped). .. ************
- 79 2021-02-10 04:10 31 ************
- 80 2021-02-10 04:15 24 *****
- 81 2021-02-10 04:20 28 *********
- 82 2021-02-10 04:25 32 *************
- 83 2021-02-10 04:30 33 **************
- 84 2021-02-10 04:35 33 **************
- 85 2021-02-10 04:40 32 *************
- 86 2021-02-10 04:45 31 ************
- ... ..( 6 skipped). .. ************
- 93 2021-02-10 05:20 31 ************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 4 0 Command failed due to ICRC error
- 0x0002 4 0 R_ERR response for data FIS
- 0x0003 4 0 R_ERR response for device-to-host data FIS
- 0x0004 4 0 R_ERR response for host-to-device data FIS
- 0x0005 4 0 R_ERR response for non-data FIS
- 0x0006 4 0 R_ERR response for device-to-host non-data FIS
- 0x0007 4 0 R_ERR response for host-to-device non-data FIS
- 0x0008 4 0 Device-to-host non-data FIS retries
- 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
- 0x000b 4 0 CRC errors within host-to-device FIS
- 0x000d 4 0 Non-CRC errors within host-to-device FIS
- 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
- 0x8e00 4 0 Vendor specific
- 0x8e01 4 0 Vendor specific
- 0x8e02 4 0 Vendor specific
- 0x8e03 4 0 Vendor specific
- 0x8e04 4 0 Vendor specific
- 0x8e05 4 0 Vendor specific
- 0x8e06 4 0 Vendor specific
- 0x8e07 4 0 Vendor specific
- 0x8e08 4 0 Vendor specific
- 0x8e09 4 0 Vendor specific
- 0x8e0a 4 0 Vendor specific
- 0x8e0b 4 0 Vendor specific
- 0x8e0c 4 0 Vendor specific
- 0x8e0d 4 0 Vendor specific
- 0x8e0e 4 0 Vendor specific
- 0x8e0f 4 0 Vendor specific
- 0x8e10 4 0 Vendor specific
- 0x8e11 4 0 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement