Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BL1: v1.2(release):armada-17.02.0:
- BL1: Built : 09:41:56, Jun 2 2NOTICE: BL2: v1.2(release):armada-17.02.0:
- NOTICE: BL2: Built : 09:41:57, Jun 2 20NOTICE: BL31: v1.2(release):armada-17.02.0:
- NOTICE: BL31:
- U-Boot 2015.01-armada-17.02.0-g8128e91 (Jun 02 2017 - 09:41:51)
- I2C: ready
- DRAM: 1 GiB
- Board: DB-88F3720-ESPRESSOBin
- CPU @ 1000 [MHz]
- L2 @ 800 [MHz]
- TClock @ 200 [MHz]
- DDR @ 800 [MHz]
- Comphy-0: PEX0 2.5 Gbps
- Comphy-1: USB3 5 Gbps
- Comphy-2: SATA0 5 Gbps
- Now running in RAM - U-Boot at: 3ff2b000
- U-Boot DT blob at : 000000003fa18168
- MMC: XENON-SDHCI: 0
- SF: Detected W25Q32DW with page size 256 Bytes, erase size 4 KiB, total 4 MiB
- PCIE-0: Link down
- SCSI: Target spinup took 0 ms.
- AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: ncq led only pmp fbss pio slum part sxs
- Net: neta0
- Hit any key to stop autoboot: 0
- Setting SCSI to 0
- Target spinup took 0 ms.
- AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: ncq led only pmp fbss pio slum part sxs
- scanning bus 0 for devices...
- Device 0: (0:0) Vendor: ATA Prod.: OCZ-VERTEX2 Rev: 1.37
- Type: Hard Disk
- Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
- Invalid port number 2
- Invalid port number 3
- Invalid port number 4
- Invalid port number 5
- Invalid port number 6
- Invalid port number 7
- Found 1 device(s).
- SCSI device 0:
- Device 0: (0:0) Vendor: ATA Prod.: OCZ-VERTEX2 Rev: 1.37
- Type: Hard Disk
- Capacity: 114473.4 MB = 111.7 GB (234441648 x 512)
- ... is now current device
- 14604800 bytes read in 676 ms (20.6 MiB/s)
- 12901067 bytes read in 610 ms (20.2 MiB/s)
- 7361 bytes read in 60 ms (119.1 KiB/s)
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initrd.img-4.12.1-ebin-g4b13ed5-
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 12901003 Bytes = 12.3 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01000000
- Booting using the fdt blob at 0x1000000
- Loading Ramdisk to 1f3b2000, end 1ffffa8b ... OK
- Using Device Tree in place at 0000000001000000, end 0000000001004cc0
- Starting kernel ...
- Timer summary in microseconds:
- Mark Elapsed Stage
- 0 0 reset
- 532,000 532,000 id=64
- 545,000 13,000 id=65
- 545,000 0 main_loop
- 5,072,000 4,527,000 bootm_start
- 9,931,000 4,859,000 id=9
- 9,931,000 0 id=10
- 13,208,000 3,277,000 id=11
- 13,213,000 5,000 id=12
- 17,296,000 4,083,000 start_kernel
- 17,296,000 0 id=15
- 169,905,373,014,476,551,28169,905,373,014,303,591,28 board_init_f
- Accumulated time:
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.12.1-ebin-g4b13ed5-dirty (ubuntu@ebin) (gcc version 6.3.0 20170519 (Ubuntu/Linaro 6.3.0-18ubuntu2~16.04) ) #1 SMP PREEMPT Wed Jul 12 16:25:39 UTC 2017
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
- [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
- [ 0.000000] bootconsole [ar3700_uart0] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] NUMA: Adding memblock [0x0 - 0x3ffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x41e0000 - 0x3fffffff] on node 0
- [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x3fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x3efe7800-0x3efe92ff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] node 0: [mem 0x00000000041e0000-0x000000003fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] percpu: Embedded 24 pages/cpu @ffff80003efb4000 s60184 r8192 d29928 u98304
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257568
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/sda1 rw rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 986356K/1046656K available (9596K kernel code, 694K rwdata, 3308K rodata, 640K init, 304K bss, 43916K reserved, 16384K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff0000089e0000 ( 9600 KB)
- [ 0.000000] .rodata : 0xffff0000089e0000 - 0xffff000008d20000 ( 3328 KB)
- [ 0.000000] .init : 0xffff000008d20000 - 0xffff000008dc0000 ( 640 KB)
- [ 0.000000] .data : 0xffff000008dc0000 - 0xffff000008e6da00 ( 695 KB)
- [ 0.000000] .bss : 0xffff000008e6da00 - 0xffff000008eb9de4 ( 305 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
- [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
- [ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
- [ 0.008412] Console: colour dummy device 80x25
- [ 0.012950] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
- [ 0.023479] pid_max: default: 32768 minimum: 301
- [ 0.028290] Security Framework initialized
- [ 0.032685] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.040865] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.048279] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.055108] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.078538] ASID allocator initialised with 65536 entries
- [ 0.092227] EFI services will not be available.
- [ 0.112852] smp: Bringing up secondary CPUs ...
- [ 0.149593] Detected VIPT I-cache on CPU1
- [ 0.149620] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
- [ 0.149647] CPU1: Booted secondary processor [410fd034]
- [ 0.149712] smp: Brought up 1 node, 2 CPUs
- [ 0.170424] SMP: Total of 2 processors activated.
- [ 0.175265] CPU features: detected feature: GIC system register CPU interface
- [ 0.182611] CPU features: detected feature: 32-bit EL0 Support
- [ 0.188704] CPU: All CPU(s) started at EL2
- [ 0.192850] alternatives: patching kernel code
- [ 0.198066] devtmpfs: initialized
- [ 0.203017] DMI not present or invalid.
- [ 0.207068] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.217056] futex hash table entries: 512 (order: 4, 65536 bytes)
- [ 0.223842] xor: measuring software checksum speed
- [ 0.268781] 8regs : 1918.000 MB/sec
- [ 0.313048] 8regs_prefetch: 1711.000 MB/sec
- [ 0.357671] 32regs : 2273.000 MB/sec
- [ 0.401938] 32regs_prefetch: 1984.000 MB/sec
- [ 0.406611] xor: using function: 32regs (2273.000 MB/sec)
- [ 0.412171] pinctrl core: initialized pinctrl subsystem
- [ 0.418483] NET: Registered protocol family 16
- [ 0.427084] cpuidle: using governor ladder
- [ 0.435354] cpuidle: using governor menu
- [ 0.439655] vdso: 2 pages (1 code @ ffff0000089e7000, 1 data @ ffff000008dc5000)
- [ 0.447283] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.455094] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.461424] Serial: AMBA PL011 UART driver
- [ 0.466767] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 9, base_baud = 0) is a mvebu-uart
- [ 0.475693] console [ttyMV0] enabled
- [ 0.475693] console [ttyMV0] enabled
- [ 0.483023] bootconsole [ar3700_uart0] disabled
- [ 0.483023] bootconsole [ar3700_uart0] disabled
- [ 0.516835] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.591587] raid6: int64x1 gen() 386 MB/s
- [ 0.659614] raid6: int64x1 xor() 379 MB/s
- [ 0.727796] raid6: int64x2 gen() 602 MB/s
- [ 0.799953] raid6: int64x2 xor() 510 MB/s
- [ 0.872241] raid6: int64x4 gen() 868 MB/s
- [ 0.944425] raid6: int64x4 xor() 632 MB/s
- [ 1.016510] raid6: int64x8 gen() 945 MB/s
- [ 1.088512] raid6: int64x8 xor() 616 MB/s
- [ 1.156622] raid6: neonx1 gen() 631 MB/s
- [ 1.228680] raid6: neonx1 xor() 652 MB/s
- [ 1.300705] raid6: neonx2 gen() 1041 MB/s
- [ 1.372771] raid6: neonx2 xor() 889 MB/s
- [ 1.440848] raid6: neonx4 gen() 1332 MB/s
- [ 1.508879] raid6: neonx4 xor() 1013 MB/s
- [ 1.576942] raid6: neonx8 gen() 1420 MB/s
- [ 1.645020] raid6: neonx8 xor() 1046 MB/s
- [ 1.648978] raid6: using algorithm neonx8 gen() 1420 MB/s
- [ 1.654281] raid6: .... xor() 1046 MB/s, rmw enabled
- [ 1.659668] raid6: using intx1 recovery algorithm
- [ 1.665282] ACPI: Interpreter disabled.
- [ 1.669655] vgaarb: loaded
- [ 1.672272] SCSI subsystem initialized
- [ 1.676830] usbcore: registered new interface driver usbfs
- [ 1.682446] usbcore: registered new interface driver hub
- [ 1.687984] usbcore: registered new device driver usb
- [ 1.693091] pxa2xx-i2c d0011000.i2c: failed to get the clk: -517
- [ 1.699602] pps_core: LinuxPPS API ver. 1 registered
- [ 1.704212] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- [ 1.713572] PTP clock support registered
- [ 1.718483] dmi: Firmware registration failed.
- [ 1.722668] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.729376] clocksource: Switched to clocksource arch_sys_counter
- [ 1.735423] VFS: Disk quotas dquot_6.6.0
- [ 1.739777] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.746668] pnp: PnP ACPI: disabled
- [ 1.756097] NET: Registered protocol family 2
- [ 1.760562] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.768237] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 1.775068] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.781474] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.787804] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.794005] NET: Registered protocol family 1
- [ 1.798633] RPC: Registered named UNIX socket transport module.
- [ 1.804897] RPC: Registered udp transport module.
- [ 1.809738] RPC: Registered tcp transport module.
- [ 1.814500] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.820952] Trying to unpack rootfs image as initramfs...
- [ 2.462568] Freeing initrd memory: 12596K
- [ 2.467095] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 2.475285] kvm [1]: 8-bit VMID
- [ 2.478460] kvm [1]: IDMAP page: 9c9000
- [ 2.481874] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 2.488435] kvm [1]: Hyp mode initialized successfully
- [ 2.493142] kvm [1]: vgic-v2@d1da0000
- [ 2.497094] kvm [1]: GIC system register CPU interface enabled
- [ 2.503588] kvm [1]: vgic interrupt IRQ1
- [ 2.507567] kvm [1]: virtual timer IRQ4
- [ 2.514112] audit: initializing netlink subsys (disabled)
- [ 2.519912] audit: type=2000 audit(2.410:1): state=initialized audit_enabled=0 res=1
- [ 2.519973] workingset: timestamp_bits=44 max_order=18 bucket_order=0
- [ 2.531370] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.532439] NFS: Registering the id_resolver key type
- [ 2.532461] Key type id_resolver registered
- [ 2.532462] Key type id_legacy registered
- [ 2.532471] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.532480] Installing knfsd (copyright (C) 1996 [email protected]).
- [ 2.532677] jffs2: version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
- [ 2.533178] 9p: Installing v9fs 9p2000 file system support
- [ 2.537022] async_tx: api initialized (async)
- [ 2.537122] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 2.541286] io scheduler noop registered
- [ 2.541339] io scheduler cfq registered (default)
- [ 2.541342] io scheduler mq-deadline registered
- [ 2.541344] io scheduler kyber registered
- [ 2.544009] OF: PCI: host bridge /soc/pcie@d0070000 ranges:
- [ 2.544026] OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- [ 2.544032] OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
- [ 3.544175] advk-pcie d0070000.pcie: link never came up
- [ 3.549715] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- [ 3.556213] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.561537] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
- [ 3.568631] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
- [ 5.010154] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
- [ 5.019514] mv_xor d0060900.xor: Marvell shared XOR driver
- [ 5.054065] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy sg intr )
- [ 5.094059] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy sg intr )
- [ 5.104115] xenfs: not registering filesystem on non-xen platform
- [ 5.113021] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 5.121606] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 5.128444] brd: module loaded
- [ 5.138735] loop: module loaded
- [ 5.142314] hisi_sas: driver version v1.6
- [ 5.147217] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 5.156253] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
- [ 5.169503] scsi host0: ahci-mvebu
- [ 5.173175] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e1fff] port 0x100 irq 14
- [ 5.184682] random: fast init done
- [ 5.191195] m25p80 spi32766.0: w25q32dw (4096 Kbytes)
- [ 5.198486] libphy: Fixed MDIO Bus: probed
- [ 5.203187] tun: Universal TUN/TAP device driver, 1.6
- [ 5.209103] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 5.214996] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 5.221233] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 5.228012] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 5.233802] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 5.241924] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 5.247819] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
- [ 5.255757] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
- [ 5.261923] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k
- [ 5.271659] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
- [ 5.278054] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- [ 5.285492] ixgb: Copyright (c) 1999-2008 Intel Corporation.
- [ 5.291252] libphy: orion_mdio_bus: probed
- [ 5.295802] mv88e6085 d0032004.mdio-mii:01: switch 0x341 detected: Marvell 88E6341, revision 0
- [ 5.312645] libphy: /soc/internal-regs@d0000000/mdio@32004/switch0@1/mdio: probed
- [ 5.340154] mvneta d0030000.ethernet eth0: Using device tree mac address f0:ad:4e:03:83:72
- [ 5.348959] sky2: driver version 1.30
- [ 5.352971] VFIO - User Level meta-driver version: 0.3
- [ 5.358949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.365650] ehci-pci: EHCI PCI platform driver
- [ 5.369833] ehci-platform: EHCI generic platform driver
- [ 5.375174] ehci-orion: EHCI orion driver
- [ 5.379980] orion-ehci d005e000.usb: EHCI Host Controller
- [ 5.385238] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
- [ 5.393410] orion-ehci d005e000.usb: irq 12, io mem 0xd005e000
- [ 5.413388] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
- [ 5.420015] hub 1-0:1.0: USB hub found
- [ 5.423394] hub 1-0:1.0: 1 port detected
- [ 5.427662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 5.434073] ohci-pci: OHCI PCI platform driver
- [ 5.438544] ohci-platform: OHCI generic platform driver
- [ 5.444702] xhci-hcd d0058000.usb: xHCI Host Controller
- [ 5.450054] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
- [ 5.458149] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010
- [ 5.466297] xhci-hcd d0058000.usb: irq 11, io mem 0xd0058000
- [ 5.472765] hub 2-0:1.0: USB hub found
- [ 5.476600] hub 2-0:1.0: 1 port detected
- [ 5.480828] xhci-hcd d0058000.usb: xHCI Host Controller
- [ 5.486163] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
- [ 5.493832] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.502531] hub 3-0:1.0: USB hub found
- [ 5.506444] hub 3-0:1.0: 1 port detected
- [ 5.510900] usbcore: registered new interface driver usb-storage
- [ 5.518092] i2c /dev entries driver
- [ 5.522646] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
- [ 5.532018] sdhci: Secure Digital Host Controller Interface driver
- [ 5.537996] sdhci: Copyright(c) Pierre Ossman
- [ 5.542758] Synopsys Designware Multimedia Card Interface Driver
- [ 5.549115] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 5.555142] xenon-sdhci d00d0000.sdhci: Got CD GPIO
- [ 5.598428] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
- [ 5.606388] ledtrig-cpu: registered to indicate activity on CPUs
- [ 5.613110] usbcore: registered new interface driver usbhid
- [ 5.618565] usbhid: USB HID core driver
- [ 5.624165] Initializing XFRM netlink socket
- [ 5.628447] NET: Registered protocol family 17
- [ 5.633425] 8021q: 802.1Q VLAN Support v1.8
- [ 5.637340] 9pnet: Installing 9P2000 support
- [ 5.641959] Key type dns_resolver registered
- [ 5.646206] mpls_gso: MPLS GSO support
- [ 5.650519] registered taskstats version 1
- [ 5.653439] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.660484] ata1.00: ATA-8: OCZ-VERTEX2, 1.37, max UDMA/133
- [ 5.660489] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 5.670467] ata1.00: configured for UDMA/133
- [ 5.674958] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.37 PQ: 0 ANSI: 5
- [ 5.687351] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 5.688690] i2c i2c-0: PXA I2C adapter
- [ 5.689148] mv88e6085 d0032004.mdio-mii:01: switch 0x341 detected: Marvell 88E6341, revision 0
- [ 5.697313] libphy: /soc/internal-regs@d0000000/mdio@32004/switch0@1/mdio: probed
- [ 5.718254] sd 0:0:0:0: [sda] Write Protect is off
- [ 5.723166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.728474] DSA: switch 0 0 parsed
- [ 5.728477] DSA: tree 0 parsed
- [ 5.741027] sda: sda1
- [ 5.744456] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 6.423378] Marvell 88E6390 !soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11: attached PHY driver [Marvell 88E6390] (mii_bus:phy_addr=!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11, irq=-1)
- [ 6.515389] Marvell 88E6390 !soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12: attached PHY driver [Marvell 88E6390] (mii_bus:phy_addr=!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12, irq=-1)
- [ 6.607392] Marvell 88E6390 !soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13: attached PHY driver [Marvell 88E6390] (mii_bus:phy_addr=!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13, irq=-1)
- [ 6.626893] hctosys: unable to open rtc device (rtc0)
- [ 6.631586] ALSA device list:
- [ 6.638992] Freeing unused kernel memory: 640K
- Loading, please wait...
- starting version 229
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Will now check root file system ... fsck from util-linux 2.27.1
- [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
- /dev/sda1: recovering journal
- /dev/sda1: clean, 76950/7331840 files, 1932217/29304945 blocks
- done.
- [ 7.038767] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 7.163266] systemd[1]: System time before build time, advancing clock.
- [ 7.180592] NET: Registered protocol family 10
- [ 7.185992] Segment Routing with IPv6
- [ 7.201013] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 7.219953] systemd[1]: Detected architecture arm64.
- Welcome to Ubuntu 16.04.3 LTS!
- [ 7.237863] systemd[1]: Set hostname to <espressobin>.
- [ 7.412332] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ 7.433764] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 7.449686] systemd[1]: Listening on udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 7.465581] systemd[1]: Listening on Syslog Socket.
- [ OK ] Listening on Syslog Socket.
- [ 7.481772] systemd[1]: Listening on Journal Audit Socket.
- [ OK ] Listening on Journal Audit Socket.
- [ 7.501504] systemd[1]: Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems (Pre).
- [ 7.521474] systemd[1]: Reached target Encrypted Volumes.
- [ OK ] Reached target Encrypted Volumes.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Created slice System Slice.
- Starting Restore / save the current clock...
- Starting Set console keymap...
- Mounting Debug File System...
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- Starting Nameserver information manager...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- Starting Create list of required st... nodes for the current kernel...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Started Trigger resolvconf update for networkd DNS.
- [ OK ] Listening on Journal Socket (/dev/log).
- Mounting POSIX Message Queue File System...
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- Starting Load Kernel Modules...
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Remote File Systems.
- Starting Remount Root and Kernel File Systems...
- Mounting Huge Pages File System...
- [ OK ] Mounted Debug File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Set console keymap.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- [FAILED] Failed to start Remount Root and Kernel File Systems.
- See 'systemctl status systemd-remount-fs.service' for details.
- [ OK ] Started Nameserver information manager.
- [ OK ] Reached target Network (Pre).
- Starting udev Coldplug all Devices...
- Starting Load/Save Random Seed...
- Activating swap /var/swap...
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Activated swap /var/swap.
- [ OK ] Reached target Swap.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- Starting udev Kernel Device Manager...
- [ OK ] Mounted /tmp.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- [ OK ] Reached target Local File Systems.
- Starting LSB: Restore and store ALSA driver settings...
- Starting Raise network interfaces...
- Starting Armbian enhanced Log2Ram...
- Starting Set console font and keymap...
- [ OK ] Started LSB: Restore and store ALSA driver settings.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Found device /dev/ttyMV0.
- [ OK ] Started Set console font and keymap.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Armbian enhanced Log2Ram.
- Starting Journal Service...
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started Regular background program processing daemon.
- Starting Login Service...
- Starting LSB: Start/stop sysstat's sadc...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- Starting LSB: Starts LIRC daemon....
- Starting System Logging Service...
- Starting Permit User Sessions...
- Starting LSB: Armbian gathering hardware information...
- Starting Avahi mDNS/DNS-SD Stack...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started System Logging Service.
- [ OK ] Started LSB: Start/stop sysstat's sadc.
- [ OK ] Started LSB: Starts LIRC daemon..
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started Login Service.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Started Network Manager.
- Starting Network Manager Script Dispatcher Service...
- Starting Network Manager Wait Online...
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started ifup for br0.
- [ OK ] Started ifup for lan1.
- [ OK ] Started ifup for lan0.
- [ OK ] Started ifup for eth0.
- Starting Set console scheme...
- [ OK ] Started Set console scheme.
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Hostname Service...
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started Hostname Service.
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- Starting Authenticate and Authorize Users to Run Privileged Tasks...
- [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Started LSB: Armbian gathering hardware information.
- [ OK ] Started Raise network interfaces.
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- [ OK ] Reached target Network is Online.
- Starting LSB: Apache2 web server...
- Starting LSB: disk temperature monitoring daemon...
- Starting LSB: Start NTP daemon...
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting Netatalk AFP fileserver for Macintosh clients...
- Starting /etc/rc.local Compatibility...
- [ OK ] Started Unattended Upgrades Shutdown.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Netatalk AFP fileserver for Macintosh clients.
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Started Serial Getty on ttyMV0.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started LSB: Start NTP daemon.
- [ OK ] Started LSB: Apache2 web server.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 16.04.3 LTS espressobin ttyMV0
- espressobin login:
Add Comment
Please, Sign In to add comment