API tools faq
paste
Guest User

MacchiatoBin 5.1-rc2 with ACPI (full bootargs)

a guest
Apr 1st, 2019
16
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.25 KB | None | 0 0
raw download clone embed print report
  1. FS0:\> Linux_50.efi earlycon=uart8250,mmio32,0xf0512000 acpi=force earlyprintk=t
  2. tyS0,115200n81 console=ttyS0,115200n81 root=/dev/nfs nfsroot=10.2.0.102:/nfsroot
  3. /users/mw/buildroot-armv8-le ip=10.2.2.140:10.2.0.102:10.2.0.254:255.255.0.0:mar
  4. vell:eth2:off rw rootwait
  5. Loading driver at 0x000B51E1000 EntryPoint=0x000B6266318
  6. Loading driver at 0x000B51E1000 EntryPoint=0x000B6266318
  7. EFI stub: Booting Linux Kernel...
  8. EFI stub: Generating empty DTB
  9. EFI stub: Exiting boot services and installing virtual address map...
  10. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081]
  11. [ 0.000000] Linux version 5.1.0-rc2-00001-g4169b42-dirty (mw@gilgamesh) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #18 SMP PREEMPT Sat Mar 30 08:43:43 CET 2019
  12. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '')
  13. [ 0.000000] printk: bootconsole [uart8250] enabled
  14. [ 0.000000] efi: Getting EFI parameters from FDT:
  15. [ 0.000000] efi: EFI v2.70 by EDK II
  16. [ 0.000000] efi: ACPI 2.0=0xb6760000 MEMATTR=0xbc655918 ESRT=0xbc839198 RNG=0xbffdcf18 MEMRESERVE=0xb6773018
  17. [ 0.000000] efi: seeding entropy pool
  18. [ 0.000000] esrt: Reserving ESRT space from 0x00000000bc839198 to 0x00000000bc8391d0.
  19. [ 0.000000] cma: Reserved 32 MiB at 0x00000000bd800000
  20. [ 0.000000] ACPI: Early table checksum verification disabled
  21. [ 0.000000] ACPI: RSDP 0x00000000B6760000 000024 (v02 MVEBU )
  22. [ 0.000000] ACPI: XSDT 0x00000000B6750000 00004C (v01 MVEBU ARMADA8K 00000000 01000013)
  23. [ 0.000000] ACPI: FACP 0x00000000B6730000 000114 (v06 MVEBU ARMADA8K 00000000 LNRO 00000000)
  24. [ 0.000000] ACPI: DSDT 0x00000000B6740000 00065C (v02 MVEBU ARMADA8K 00000003 INTL 20160108)
  25. [ 0.000000] ACPI: GTDT 0x00000000B6720000 00007C (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  26. [ 0.000000] ACPI: APIC 0x00000000B6710000 0001E4 (v04 MVEBU ARMADA8K 00000000 LNRO 00000000)
  27. [ 0.000000] ACPI: PPTT 0x00000000B6700000 0001E4 (v01 MVEBU ARMADA8K 00000000 LNRO 00000000)
  28. [ 0.000000] ACPI: SPCR 0x00000000B66F0000 000050 (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  29. [ 0.000000] ACPI: SPCR: console: uart,mmio32,0xf0512000,115200
  30. [ 0.000000] ACPI: NUMA: Failed to initialise from firmware
  31. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
  32. [ 0.000000] NUMA: NODE_DATA [mem 0x43dff5840-0x43dff6fff]
  33. [ 0.000000] Zone ranges:
  34. [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
  35. [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]
  36. [ 0.000000] Movable zone start for each node
  37. [ 0.000000] Early memory node ranges
  38. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  39. [ 0.000000] node 0: [mem 0x0000000005400000-0x00000000bf80ffff]
  40. [ 0.000000] node 0: [mem 0x00000000bf810000-0x00000000bfbeffff]
  41. [ 0.000000] node 0: [mem 0x00000000bfbf0000-0x00000000bfc1ffff]
  42. [ 0.000000] node 0: [mem 0x00000000bfc20000-0x00000000bffdffff]
  43. [ 0.000000] node 0: [mem 0x00000000bffe0000-0x00000000bfffffff]
  44. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff]
  45. [ 0.000000] Zeroed struct page in unavailable ranges: 976 pages
  46. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000043fffffff]
  47. [ 0.000000] psci: probing for conduit method from ACPI.
  48. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  49. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  50. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  51. [ 0.000000] psci: SMC Calling Convention v1.1
  52. [ 0.000000] ACPI: SRAT not present
  53. [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x470 with crng_init=0
  54. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56664 r8192 d29352 u94208
  55. [ 0.000000] Detected PIPT I-cache on CPU0
  56. [ 0.000000] CPU features: detected: EL2 vector hardening
  57. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  58. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4123728
  59. [ 0.000000] Policy zone: Normal
  60. [ 0.000000] Kernel command line: Linux_50.efi earlycon=uart8250,mmio32,0xf0512000 acpi=force earlyprintk=ttyS0,115200n81 console=ttyS0,115200n81 root=/dev/nfs nfsroot=10.2.0.102:/nfsroot/users/mw/buildroot-armv8-le ip=10.2.2.140:10.2.0.102:10.2.0.254:255.255.0.0:marvell:eth2:off rw rootwait
  61. [ 0.000000] software IO TLB: mapped [mem 0xb8655000-0xbc655000] (64MB)
  62. [ 0.000000] Memory: 16333832K/16756736K available (11260K kernel code, 1714K rwdata, 5552K rodata, 1408K init, 446K bss, 390136K reserved, 32768K cma-reserved)
  63. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  64. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  65. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  66. [ 0.000000] Tasks RCU enabled.
  67. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  68. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  69. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  70. [ 0.000000] GIC: Using split EOI/Deactivate mode
  71. [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
  72. [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
  73. [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
  74. [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
  75. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  76. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  77. [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  78. [ 0.008294] Console: colour dummy device 80x25
  79. [ 0.012901] ACPI: Core revision 20190215
  80. [ 0.016994] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  81. [ 0.027763] pid_max: default: 32768 minimum: 301
  82. [ 0.032586] LSM: Security Framework initializing
  83. [ 0.041349] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  84. [ 0.051128] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  85. [ 0.058782] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  86. [ 0.066102] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  87. [ 0.073919] *** VALIDATE proc ***
  88. [ 0.077396] *** VALIDATE cgroup1 ***
  89. [ 0.081141] *** VALIDATE cgroup2 ***
  90. [ 0.105176] ASID allocator initialised with 32768 entries
  91. [ 0.118790] rcu: Hierarchical SRCU implementation.
  92. [ 0.131839] Remapping and enabling EFI services.
  93. [ 0.144704] smp: Bringing up secondary CPUs ...
  94. [ 0.181671] Detected PIPT I-cache on CPU1
  95. [ 0.181697] CPU1: Booted secondary processor 0x0000000001 [0x410fd081]
  96. [ 0.213686] Detected PIPT I-cache on CPU2
  97. [ 0.213706] CPU2: Booted secondary processor 0x0000000100 [0x410fd081]
  98. [ 0.245711] Detected PIPT I-cache on CPU3
  99. [ 0.245725] CPU3: Booted secondary processor 0x0000000101 [0x410fd081]
  100. [ 0.245760] smp: Brought up 1 node, 4 CPUs
  101. [ 0.282940] SMP: Total of 4 processors activated.
  102. [ 0.287874] CPU features: detected: 32-bit EL0 Support
  103. [ 0.293257] CPU features: detected: CRC32 instructions
  104. [ 0.298901] CPU: All CPU(s) started at EL2
  105. [ 0.303197] alternatives: patching kernel code
  106. [ 0.309283] devtmpfs: initialized
  107. [ 0.313140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  108. [ 0.323300] futex hash table entries: 1024 (order: 4, 65536 bytes)
  109. [ 0.330069] pinctrl core: initialized pinctrl subsystem
  110. [ 0.335856] DMI not present or invalid.
  111. [ 0.339998] NET: Registered protocol family 16
  112. [ 0.344816] audit: initializing netlink subsys (disabled)
  113. [ 0.350451] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1
  114. [ 0.358524] cpuidle: using governor menu
  115. [ 0.362830] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  116. [ 0.370567] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  117. [ 0.377951] DMA: preallocated 256 KiB pool for atomic allocations
  118. [ 0.384601] ACPI: bus type PCI registered
  119. [ 0.388802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  120. [ 0.395642] Serial: AMBA PL011 UART driver
  121. [ 0.404664] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  122. [ 0.411672] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  123. [ 0.418645] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  124. [ 0.425591] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  125. [ 0.432746] cryptd: max_cpu_qlen set to 1000
  126. [ 0.437646] ACPI: Added _OSI(Module Device)
  127. [ 0.441977] ACPI: Added _OSI(Processor Device)
  128. [ 0.447033] ACPI: Added _OSI(3.0 _SCP Extensions)
  129. [ 0.451937] ACPI: Added _OSI(Processor Aggregator Device)
  130. [ 0.457533] ACPI: Added _OSI(Linux-Dell-Video)
  131. [ 0.462177] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  132. [ 0.467729] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
  133. [ 0.473448] ACPI: 1 ACPI AML tables successfully acquired and loaded
  134. [ 0.480333] ACPI: Interpreter enabled
  135. [ 0.484185] ACPI: Using GIC for interrupt routing
  136. [ 0.489178] ACPI: Failed to parse MCFG (-19)
  137. [ 0.496149] vgaarb: loaded
  138. [ 0.499041] SCSI subsystem initialized
  139. [ 0.503035] ACPI: bus type USB registered
  140. [ 0.507294] usbcore: registered new interface driver usbfs
  141. [ 0.513015] usbcore: registered new interface driver hub
  142. [ 0.518613] usbcore: registered new device driver usb
  143. [ 0.524041] pps_core: LinuxPPS API ver. 1 registered
  144. [ 0.529211] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  145. [ 0.538799] PTP clock support registered
  146. [ 0.542997] EDAC MC: Ver: 3.0.0
  147. [ 0.546362] Registered efivars operations
  148. [ 0.551382] Advanced Linux Sound Architecture Driver Initialized.
  149. [ 0.558004] clocksource: Switched to clocksource arch_sys_counter
  150. [ 0.564446] VFS: Disk quotas dquot_6.6.0
  151. [ 0.568541] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  152. [ 0.575702] *** VALIDATE hugetlbfs ***
  153. [ 0.579642] pnp: PnP ACPI init
  154. [ 0.582883] pnp: PnP ACPI: found 0 devices
  155. [ 0.589498] NET: Registered protocol family 2
  156. [ 0.594284] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
  157. [ 0.602709] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  158. [ 0.610870] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  159. [ 0.618255] TCP: Hash tables configured (established 131072 bind 65536)
  160. [ 0.625135] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  161. [ 0.631637] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  162. [ 0.638604] NET: Registered protocol family 1
  163. [ 0.643311] RPC: Registered named UNIX socket transport module.
  164. [ 0.649531] RPC: Registered udp transport module.
  165. [ 0.654446] RPC: Registered tcp transport module.
  166. [ 0.659361] RPC: Registered tcp NFSv4.1 backchannel transport module.
  167. [ 0.666327] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
  168. [ 0.674666] kvm [1]: IPA Size Limit: 44bits
  169. [ 0.679268] kvm [1]: vgic interrupt IRQ1
  170. [ 0.683408] kvm [1]: Hyp mode initialized successfully
  171. [ 0.691556] Initialise system trusted keyrings
  172. [ 0.696290] workingset: timestamp_bits=44 max_order=22 bucket_order=0
  173. [ 0.705473] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  174. [ 0.711774] NFS: Registering the id_resolver key type
  175. [ 0.717052] Key type id_resolver registered
  176. [ 0.721401] Key type id_legacy registered
  177. [ 0.725639] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  178. [ 0.732708] 9p: Installing v9fs 9p2000 file system support
  179. [ 0.740625] Key type asymmetric registered
  180. [ 0.744875] Asymmetric key parser 'x509' registered
  181. [ 0.749962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  182. [ 0.757704] io scheduler mq-deadline registered
  183. [ 0.762375] io scheduler kyber registered
  184. [ 0.768626] EINJ: EINJ table not found.
  185. [ 0.772806] ACPI GTDT: found 1 SBSA generic Watchdog(s).
  186. [ 0.780987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  187. [ 0.788301] printk: console [ttyS0] disabled
  188. [ 0.813126] HISI0031:00: ttyS0 at MMIO 0xf0512000 (irq = 10, base_baud = 12500000) is a 16550A
  189. [ 0.822216] printk: console [ttyS0] enabled
  190. [ 0.822216] printk: console [ttyS0] enabled
  191. [ 0.830731] printk: bootconsole [uart8250] disabled
  192. [ 0.830731] printk: bootconsole [uart8250] disabled
  193. [ 0.841015] SuperH (H)SCI(F) driver initialized
  194. [ 0.845654] msm_serial: driver initialized
  195. [ 0.852754] loop: module loaded
  196. [ 0.856498] ahci LNRO001E:00: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  197. [ 0.864899] ahci LNRO001E:00: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  198. [ 0.873332] scsi host0: ahci
  199. [ 0.876439] scsi host1: ahci
  200. [ 0.879530] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x100 irq 5
  201. [ 0.887403] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x180 irq 5
  202. [ 0.895447] ahci LNRO001E:01: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  203. [ 0.903841] ahci LNRO001E:01: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  204. [ 0.912283] scsi host2: ahci
  205. [ 0.915359] scsi host3: ahci
  206. [ 0.918383] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x100 irq 6
  207. [ 0.926254] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x180 irq 6
  208. [ 0.934884] libphy: Fixed MDIO Bus: probed
  209. [ 0.939234] tun: Universal TUN/TAP device driver, 1.6
  210. [ 0.944548] thunder_xcv, ver 1.0
  211. [ 0.947811] thunder_bgx, ver 1.0
  212. [ 0.951069] nicpf, ver 1.0
  213. [ 0.953906] hclge is initializing
  214. [ 0.957238] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  215. [ 0.964491] hns3: Copyright (c) 2017 Huawei Corporation.
  216. [ 0.969855] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  217. [ 0.975713] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  218. [ 0.981672] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  219. [ 0.988665] igb: Copyright (c) 2007-2014 Intel Corporation.
  220. [ 0.994274] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  221. [ 1.002138] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  222. [ 1.013262] mvpp2 MRVL0110:00 eth0: Using random mac address aa:12:86:29:aa:ad
  223. [ 1.030777] mvpp2 MRVL0110:01 eth1: Using random mac address c6:01:66:9a:a5:be
  224. [ 1.039693] mvpp2 MRVL0110:01 eth2: Using random mac address a6:74:56:dd:66:26
  225. [ 1.051201] sky2: driver version 1.30
  226. [ 1.055166] VFIO - User Level meta-driver version: 0.3
  227. [ 1.060689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  228. [ 1.067275] ehci-pci: EHCI PCI platform driver
  229. [ 1.071757] ehci-platform: EHCI generic platform driver
  230. [ 1.077037] ehci-orion: EHCI orion driver
  231. [ 1.081084] ehci-exynos: EHCI EXYNOS driver
  232. [ 1.085305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  233. [ 1.091521] ohci-pci: OHCI PCI platform driver
  234. [ 1.096002] ohci-platform: OHCI generic platform driver
  235. [ 1.101272] ohci-exynos: OHCI EXYNOS driver
  236. [ 1.105641] xhci-hcd PNP0D10:00: xHCI Host Controller
  237. [ 1.110729] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 1
  238. [ 1.118213] xhci-hcd PNP0D10:00: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
  239. [ 1.127243] xhci-hcd PNP0D10:00: irq 7, io mem 0xf2500000
  240. [ 1.132932] hub 1-0:1.0: USB hub found
  241. [ 1.136714] hub 1-0:1.0: 1 port detected
  242. [ 1.140754] xhci-hcd PNP0D10:00: xHCI Host Controller
  243. [ 1.145838] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
  244. [ 1.153096] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed
  245. [ 1.159327] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  246. [ 1.167607] hub 2-0:1.0: USB hub found
  247. [ 1.171385] hub 2-0:1.0: 1 port detected
  248. [ 1.175498] xhci-hcd PNP0D10:01: xHCI Host Controller
  249. [ 1.180579] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 3
  250. [ 1.188053] xhci-hcd PNP0D10:01: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
  251. [ 1.197066] xhci-hcd PNP0D10:01: irq 8, io mem 0xf2510000
  252. [ 1.202731] hub 3-0:1.0: USB hub found
  253. [ 1.206511] hub 3-0:1.0: 1 port detected
  254. [ 1.207094] ata1: SATA link down (SStatus 0 SControl 300)
  255. [ 1.210541] xhci-hcd PNP0D10:01: xHCI Host Controller
  256. [ 1.220955] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 4
  257. [ 1.228211] xhci-hcd PNP0D10:01: Host supports USB 3.0 SuperSpeed
  258. [ 1.234438] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  259. [ 1.242728] hub 4-0:1.0: USB hub found
  260. [ 1.246506] hub 4-0:1.0: 1 port detected
  261. [ 1.246933] ata4: SATA link down (SStatus 0 SControl 300)
  262. [ 1.250628] xhci-hcd PNP0D10:02: xHCI Host Controller
  263. [ 1.260954] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 5
  264. [ 1.268425] xhci-hcd PNP0D10:02: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
  265. [ 1.277441] xhci-hcd PNP0D10:02: irq 9, io mem 0xf4500000
  266. [ 1.283099] hub 5-0:1.0: USB hub found
  267. [ 1.286877] hub 5-0:1.0: 1 port detected
  268. [ 1.290910] xhci-hcd PNP0D10:02: xHCI Host Controller
  269. [ 1.295988] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 6
  270. [ 1.303244] xhci-hcd PNP0D10:02: Host supports USB 3.0 SuperSpeed
  271. [ 1.309467] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  272. [ 1.317750] hub 6-0:1.0: USB hub found
  273. [ 1.321529] hub 6-0:1.0: 1 port detected
  274. [ 1.325700] usbcore: registered new interface driver usb-storage
  275. [ 1.332557] rtc-efi rtc-efi: registered as rtc0
  276. [ 1.337313] i2c /dev entries driver
  277. [ 1.341829] sdhci: Secure Digital Host Controller Interface driver
  278. [ 1.348042] sdhci: Copyright(c) Pierre Ossman
  279. [ 1.352541] Synopsys Designware Multimedia Card Interface Driver
  280. [ 1.358790] sdhci-pltfm: SDHCI platform and OF driver helper
  281. [ 1.364788] ledtrig-cpu: registered to indicate activity on CPUs
  282. [ 1.371418] usbcore: registered new interface driver usbhid
  283. [ 1.374028] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  284. [ 1.377023] usbhid: USB HID core driver
  285. [ 1.387179] ata2.00: ATA-8: WDC WD3200BEKX-75B7WT0, 01.01A01, max UDMA/133
  286. [ 1.388094] NET: Registered protocol family 17
  287. [ 1.394099] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32)
  288. [ 1.398634] 9pnet: Installing 9P2000 support
  289. [ 1.409391] Key type dns_resolver registered
  290. [ 1.413776] ata2.00: configured for UDMA/133
  291. [ 1.413974] registered taskstats version 1
  292. [ 1.418294] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEKX-7 1A01 PQ: 0 ANSI: 5
  293. [ 1.422183] Loading compiled-in X.509 certificates
  294. [ 1.422203] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  295. [ 1.423625] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
  296. [ 1.430379] rtc-efi rtc-efi: setting system clock to 2019-04-02T02:28:32 UTC (1554172112)
  297. [ 1.430748] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  298. [ 1.435239] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
  299. [ 1.441443] sd 1:0:0:0: [sda] Write Protect is off
  300. [ 1.449838] ata3.00: configured for UDMA/133
  301. [ 1.456570] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  302. [ 1.464270] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
  303. [ 1.470570] sd 1:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
  304. [ 1.474006] IP-Config: Complete:
  305. [ 1.474010] device=eth2, hwaddr=a6:74:56:dd:66:26, ipaddr=10.2.2.140, mask=255.255.0.0, gw=10.2.0.254
  306. [ 1.474012] host=marvell, domain=, nis-domain=(none)
  307. [ 1.474014] bootserver=10.2.0.102, rootserver=10.2.0.102, rootpath=
  308. [ 1.474102] ALSA device list:
  309. [ 1.474104] No soundcards found.
  310. [ 1.475636] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  311. [ 1.543673] sd 2:0:0:0: [sdb] Write Protect is off
  312. [ 1.548533] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  313. [ 1.557648] sd 2:0:0:0: [sdb] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
  314. [ 1.616955] sdb: sdb1 sdb2 sdb3
  315. [ 1.620749] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  316. [ 1.662041] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  317. [ 1.686858] usb-storage 6-1:1.0: USB Mass Storage device detected
  318. [ 1.697137] scsi host4: usb-storage 6-1:1.0
  319. [ 1.792674] sd 1:0:0:0: [sda] Attached SCSI removable disk
  320. [ 1.804993] VFS: Mounted root (nfs filesystem) on device 0:18.
  321. [ 1.811273] devtmpfs: mounted
  322. [ 1.814638] Freeing unused kernel memory: 1408K
  323. [ 1.842037] Run /sbin/init as init process
  324. [ 1.876661] random: fast init done
  325. Starting logging: OK
  326. Initializing random number generator... [ 2.484920] random: dd: uninitialized urandom read (512 bytes read)
  327. done.
  328. Starting rpcbind: OK
  329. Starting network...
  330. RTNETLINK answers: File exists
  331. Starting lighttpd: [ 2.620205] random: lighttpd: uninitialized urandom read (4096 bytes read)
  332. OK
  333. Starting Netatalk
  334. [ 2.726266] scsi 4:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  335. [ 2.734784] sd 4:0:0:0: [sdc] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
  336. [ 2.742518] sd 4:0:0:0: [sdc] Write Protect is off
  337. [ 2.747548] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  338. [ 2.756837] sd 4:0:0:0: [sdc] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
  339. [ 2.760060] random: ssh-keygen: uninitialized urandom read (32 bytes read)
  340. [ 2.766093] sdc: sdc1 sdc2
  341. [ 2.775159] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  342. Starting sshd: OK
  343. Starting NFS statd: done
  344. Starting NFS services: exportfs: can't open /run/nfs/xtab for reading
  345. done
  346. Starting NFS daemon: rpc.nfsd: Unable to access /proc/fs/nfsd errno 2 (No such file or directory).
  347. Please try, as root, 'mount -t nfsd nfsd /proc/fs/nfsd' and then restart rpc.nfsd to correct the problem
  348. done
  349. Starting NFS mountd: done
  350. Starting vsftpd: OK
  351. Starting HPA's tftpd:
  352. Welcome to Buildroot
  353. buildroot login: root
  354. Password:
  355. # uname -a
  356. Linux buildroot 5.1.0-rc2-00001-g4169b42-dirty #18 SMP PREEMPT Sat Mar 30 08:43:43 CET 2019 aarch64 GNU/Linux
  357. #
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!