Guest User

Untitled

a guest
Jun 23rd, 2018
110
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.90 KB | None | 0 0
  1. smartctl -a /dev/sdb
  2.  
  3. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-23-generic] (local build)
  4. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  5.  
  6. === START OF INFORMATION SECTION ===
  7. Model Family: Seagate Archive HDD
  8. Device Model: ST8000AS0002-1NA17Z
  9. Serial Number: Z8414DRB
  10. LU WWN Device Id: 5 000c50 0a46101d3
  11. Firmware Version: AR17
  12. User Capacity: 8.001.563.222.016 bytes [8,00 TB]
  13. Sector Sizes: 512 bytes logical, 4096 bytes physical
  14. Rotation Rate: 5980 rpm
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  18. Local Time is: Sat Jun 23 14:59:41 2018 CEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART Status not supported: Incomplete response, ATA output registers missing
  24. SMART overall-health self-assessment test result: PASSED
  25. Warning: This result is based on an Attribute check.
  26.  
  27. General SMART Values:
  28. Offline data collection status: (0x82) Offline data collection activity
  29. was completed without error.
  30. Auto Offline Data Collection: Enabled.
  31. Self-test execution status: ( 0) The previous self-test routine completed
  32. without error or no self-test has ever
  33. been run.
  34. Total time to complete Offline
  35. data collection: ( 0) seconds.
  36. Offline data collection
  37. capabilities: (0x7b) SMART execute Offline immediate.
  38. Auto Offline data collection on/off support.
  39. Suspend Offline collection upon new
  40. command.
  41. Offline surface scan supported.
  42. Self-test supported.
  43. Conveyance Self-test supported.
  44. Selective Self-test supported.
  45. SMART capabilities: (0x0003) Saves SMART data before entering
  46. power-saving mode.
  47. Supports SMART auto save timer.
  48. Error logging capability: (0x01) Error logging supported.
  49. General Purpose Logging supported.
  50. Short self-test routine
  51. recommended polling time: ( 1) minutes.
  52. Extended self-test routine
  53. recommended polling time: ( 960) minutes.
  54. Conveyance self-test routine
  55. recommended polling time: ( 2) minutes.
  56. SCT capabilities: (0x30b5) SCT Status supported.
  57. SCT Feature Control supported.
  58. SCT Data Table supported.
  59.  
  60. SMART Attributes Data Structure revision number: 10
  61. Vendor Specific SMART Attributes with Thresholds:
  62. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  63. 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 64318728
  64. 3 Spin_Up_Time 0x0003 090 090 000 Pre-fail Always - 0
  65. 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2395
  66. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  67. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 8625048147
  68. 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2436
  69. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 22
  71. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  72. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  73. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  74. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833
  75. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  76. 190 Airflow_Temperature_Cel 0x0022 068 048 045 Old_age Always - 32 (Min/Max 18/35)
  77. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  78. 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2870
  79. 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4719
  80. 194 Temperature_Celsius 0x0022 032 052 000 Old_age Always - 32 (0 16 0 0 0)
  81. 195 Hardware_ECC_Recovered 0x001a 114 099 000 Old_age Always - 64318728
  82. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  83. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  84. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  85. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 458 (145 49 0)
  86. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15024331910
  87. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 245421272660617
  88.  
  89. SMART Error Log Version: 1
  90. No Errors Logged
  91.  
  92. SMART Self-test log structure revision number 1
  93. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  94.  
  95. SMART Selective self-test log data structure revision number 1
  96. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  97. 1 0 0 Not_testing
  98. 2 0 0 Not_testing
  99. 3 0 0 Not_testing
  100. 4 0 0 Not_testing
  101. 5 0 0 Not_testing
  102. Selective self-test flags (0x0):
  103. After scanning selected spans, do NOT read-scan remainder of disk.
  104. If Selective self-test is pending on power-up, resume after 0 minute delay.
  105.  
  106. parted /dev/sdb print
  107.  
  108. Model: ST8000AS 0002-1NA17Z (scsi)
  109. Disk /dev/sdb: 1404GB
  110. Sector size (logical/physical): 512B/512B
  111. Partition Table: msdos
  112. Disk Flags:
  113.  
  114. Number Start End Size Type File system Flags
  115. 1 1049kB 1404GB 1404GB primary ntfs
Add Comment
Please, Sign In to add comment