API tools faq
paste
vejvik

esphome kalorimetr kamstrup

vejvik
Mar 17th, 2026
100
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.33 KB | None | 0 0
raw download clone embed print report
  1. esphome:
  2. name: kalorimemetry_termostaty
  3. friendly_name: kalorimetry a termostaty
  4. platformio_options:
  5. board_build.f_cpu: 240000000L
  6.  
  7. on_boot:
  8. priority: -100
  9. then:
  10. - delay: 5s
  11. - logger.log:
  12. level: INFO
  13. format: "Start ESP – kontroluji stav termostatů"
  14. - if:
  15. condition:
  16. binary_sensor.is_on: termostat1
  17. then:
  18. - lambda: |-
  19. id(pump1_start) = millis();
  20. ESP_LOGI("boot", "Termostat 1 je ON po startu – zapinam Rele 1");
  21. - switch.turn_on: rele1
  22. - if:
  23. condition:
  24. binary_sensor.is_on: termostat2
  25. then:
  26. - lambda: |-
  27. id(pump2_start) = millis();
  28. ESP_LOGI("boot", "Termostat 2 je ON po startu – zapinam Rele 2");
  29. - switch.turn_on: rele2
  30. - if:
  31. condition:
  32. binary_sensor.is_on: termostat3
  33. then:
  34. - lambda: |-
  35. id(pump3_start) = millis();
  36. ESP_LOGI("boot", "Termostat 3 je ON po startu – zapinam Rele 3");
  37. - switch.turn_on: rele3
  38. - if:
  39. condition:
  40. binary_sensor.is_on: termostat4
  41. then:
  42. - lambda: |-
  43. id(pump4_start) = millis();
  44. ESP_LOGI("boot", "Termostat 4 je ON po startu – zapinam Rele 4");
  45. - switch.turn_on: rele4
  46.  
  47. esp32:
  48. board: esp32dev
  49. framework:
  50. type: arduino
  51.  
  52.  
  53. # Enable logging
  54. logger:
  55.  
  56.  
  57. # Enable Home Assistant API
  58. api:
  59. encryption:
  60. key: "j5UGcOWlC5gVcN/NDsiXmhhHjCzd8PlQ+6PthqYlR4M="
  61.  
  62. ota:
  63. - platform: esphome
  64. password: "0dba985dda5f42046ab8b3f0e28c1aef"
  65.  
  66. wifi:
  67. ssid: !secret wifi_ssid
  68. password: !secret wifi_password
  69.  
  70. # Enable fallback hotspot (captive portal) in case wifi connection fails
  71. ap:
  72. ssid: "Kalorimetry Fallback Hotspot"
  73. password: "iJLvGdCnHGOk"
  74.  
  75. time:
  76. - platform: sntp
  77. id: time_sntp
  78.  
  79. external_components:
  80. - source: github://SzczepanLeon/esphome-components@version_4
  81. #- source: /config/esphome/external_components/5c086c68/components
  82. refresh: 0s
  83. components: [ wmbus ]
  84.  
  85. one_wire:
  86. - platform: gpio
  87. pin: GPIO4
  88.  
  89. wmbus:
  90. mosi_pin: GPIO13
  91. miso_pin: GPIO5
  92. clk_pin: GPIO2
  93. cs_pin: GPIO14
  94. gdo0_pin: GPIO15
  95. gdo2_pin: GPIO16 # gelb
  96.  
  97. led_pin: GPIO0
  98. led_blink_time: "1s"
  99.  
  100. all_drivers: False
  101. #sync_mode: True
  102. log_all: True
  103.  
  104.  
  105. globals:
  106. - id: pump1_start
  107. type: unsigned long
  108. restore_value: no
  109. initial_value: '0'
  110.  
  111. - id: pump2_start
  112. type: unsigned long
  113. restore_value: no
  114. initial_value: '0'
  115.  
  116. - id: pump3_start
  117. type: unsigned long
  118. restore_value: no
  119. initial_value: '0'
  120.  
  121. - id: pump4_start
  122. type: unsigned long
  123. restore_value: no
  124. initial_value: '0'
  125.  
  126. # =========================================================
  127. # kalorimetry
  128. # =========================================================
  129.  
  130. sensor:
  131. # Kalorimetr 1
  132. - platform: wmbus
  133. meter_id: 0x83077062
  134. type: kamheat
  135. key: "347AF74DA7B2EEE1DC4CBEE88D9XXXX"
  136. sensors:
  137. - name: "kalorimetr1_t1_temperature_inlet"
  138. field: "t1_temperature"
  139. accuracy_decimals: 2
  140. unit_of_measurement: "°C"
  141. device_class: "temperature"
  142. state_class: "measurement"
  143. icon: "mdi:thermometer"
  144.  
  145. - name: "kalorimetr1_t2_temperature_outlet"
  146. field: "t2_temperature"
  147. accuracy_decimals: 2
  148. unit_of_measurement: "°C"
  149. device_class: "temperature"
  150. state_class: "measurement"
  151. icon: "mdi:thermometer"
  152.  
  153. - name: "kalorimetr1_total_energy_consumption"
  154. field: "total_energy_consumption"
  155. accuracy_decimals: 0
  156. unit_of_measurement: "kWh"
  157. device_class: "energy"
  158. state_class: "total_increasing"
  159. icon: "mdi:heat-pump"
  160.  
  161. - name: "kalorimetr1_total_volume"
  162. field: "total_volume"
  163. accuracy_decimals: 2
  164. unit_of_measurement: "m³"
  165. device_class: "volume"
  166. state_class: "total_increasing"
  167. icon: "mdi:water"
  168.  
  169. - name: "kalorimetr1_aktuální průtok"
  170. field: "volume_flow"
  171. accuracy_decimals: 3
  172. unit_of_measurement: "m³/h"
  173. device_class: "volume_flow_rate"
  174. state_class: "measurement"
  175. icon: "mdi:water"
  176.  
  177. - name: "kalorimetr1_target_energy"
  178. field: "target_energy"
  179. accuracy_decimals: 0
  180. unit_of_measurement: "kWh"
  181. device_class: "energy"
  182. state_class: "total_increasing"
  183. icon: "mdi:heat-pump"
  184.  
  185. - name: "kalorimetr1_target_volume"
  186. field: "target_volume"
  187. accuracy_decimals: 2
  188. unit_of_measurement: "m³"
  189. device_class: "volume"
  190. state_class: "total_increasing"
  191. icon: "mdi:water"
  192.  
  193. # Kalorimetr 2
  194. - platform: wmbus
  195. meter_id: 0x83077063
  196. type: kamheat
  197. key: "C2203DA23074525F2FEC8D1A2D2AXXXX"
  198. sensors:
  199. - name: "kalorimetr2_t1_temperature_inlet"
  200. field: "t1_temperature"
  201. accuracy_decimals: 2
  202. unit_of_measurement: "°C"
  203. device_class: "temperature"
  204. state_class: "measurement"
  205. icon: "mdi:thermometer"
  206.  
  207. - name: "kalorimetr2_t2_temperature_outlet"
  208. field: "t2_temperature"
  209. accuracy_decimals: 2
  210. unit_of_measurement: "°C"
  211. device_class: "temperature"
  212. state_class: "measurement"
  213. icon: "mdi:thermometer"
  214.  
  215. - name: "kalorimetr2_total_energy_consumption"
  216. field: "total_energy_consumption"
  217. accuracy_decimals: 0
  218. unit_of_measurement: "kWh"
  219. device_class: "energy"
  220. state_class: "total_increasing"
  221. icon: "mdi:heat-pump"
  222.  
  223. - name: "kalorimetr2_total_volume"
  224. field: "total_volume"
  225. accuracy_decimals: 2
  226. unit_of_measurement: "m³"
  227. device_class: "volume"
  228. state_class: "total_increasing"
  229. icon: "mdi:water"
  230.  
  231. - name: "kalorimetr2_aktuální průtok"
  232. field: "volume_flow"
  233. accuracy_decimals: 3
  234. unit_of_measurement: "m³/h"
  235. device_class: "volume_flow_rate"
  236. state_class: "measurement"
  237. icon: "mdi:water"
  238.  
  239. - name: "kalorimetr2_target_energy"
  240. field: "target_energy"
  241. accuracy_decimals: 0
  242. unit_of_measurement: "kWh"
  243. device_class: "energy"
  244. state_class: "total_increasing"
  245. icon: "mdi:heat-pump"
  246.  
  247. - name: "kalorimetr2_target_volume"
  248. field: "target_volume"
  249. accuracy_decimals: 2
  250. unit_of_measurement: "m³"
  251. device_class: "volume"
  252. state_class: "total_increasing"
  253. icon: "mdi:water"
  254.  
  255.  
  256.  
  257.  
  258. # Kalorimetr 3
  259. - platform: wmbus
  260. meter_id: 0x83077064
  261. type: kamheat
  262. key: "7BEF3209F2FB93E78F4F28229682XXXX"
  263. sensors:
  264. - name: "kalorimetr3_t1_temperature_inlet"
  265. field: "t1_temperature"
  266. accuracy_decimals: 2
  267. unit_of_measurement: "°C"
  268. device_class: "temperature"
  269. state_class: "measurement"
  270. icon: "mdi:thermometer"
  271.  
  272. - name: "kalorimetr3_t2_temperature_outlet"
  273. field: "t2_temperature"
  274. accuracy_decimals: 2
  275. unit_of_measurement: "°C"
  276. device_class: "temperature"
  277. state_class: "measurement"
  278. icon: "mdi:thermometer"
  279.  
  280. - name: "kalorimetr3_total_energy_consumption"
  281. field: "total_energy_consumption"
  282. accuracy_decimals: 0
  283. unit_of_measurement: "kWh"
  284. device_class: "energy"
  285. state_class: "total_increasing"
  286. icon: "mdi:heat-pump"
  287.  
  288. - name: "kalorimetr3_total_volume"
  289. field: "total_volume"
  290. accuracy_decimals: 2
  291. unit_of_measurement: "m³"
  292. device_class: "volume"
  293. state_class: "total_increasing"
  294. icon: "mdi:water"
  295.  
  296. - name: "kalorimetr3_aktuální průtok"
  297. field: "volume_flow"
  298. accuracy_decimals: 3
  299. unit_of_measurement: "m³/h"
  300. device_class: "volume_flow_rate"
  301. state_class: "measurement"
  302. icon: "mdi:water"
  303.  
  304. - name: "kalorimetr3_target_energy"
  305. field: "target_energy"
  306. accuracy_decimals: 0
  307. unit_of_measurement: "kWh"
  308. device_class: "energy"
  309. state_class: "total_increasing"
  310. icon: "mdi:heat-pump"
  311.  
  312. - name: "kalorimetr3_target_volume"
  313. field: "target_volume"
  314. accuracy_decimals: 2
  315. unit_of_measurement: "m³"
  316. device_class: "volume"
  317. state_class: "total_increasing"
  318. icon: "mdi:water"
  319.  
  320. # Kalorimetr 4
  321. - platform: wmbus
  322. meter_id: 0x83077065
  323. type: kamheat
  324. key: "0437DA39091431870F793353686FXXXX"
  325. sensors:
  326. - name: "kalorimetr4_t1_temperature_inlet"
  327. field: "t1_temperature"
  328. accuracy_decimals: 2
  329. unit_of_measurement: "°C"
  330. device_class: "temperature"
  331. state_class: "measurement"
  332. icon: "mdi:thermometer"
  333.  
  334. - name: "kalorimetr4_t2_temperature_outlet"
  335. field: "t2_temperature"
  336. accuracy_decimals: 2
  337. unit_of_measurement: "°C"
  338. device_class: "temperature"
  339. state_class: "measurement"
  340. icon: "mdi:thermometer"
  341.  
  342. - name: "kalorimetr4_total_energy_consumption"
  343. field: "total_energy_consumption"
  344. accuracy_decimals: 0
  345. unit_of_measurement: "kWh"
  346. device_class: "energy"
  347. state_class: "total_increasing"
  348. icon: "mdi:heat-pump"
  349.  
  350. - name: "kalorimetr4_total_volume"
  351. field: "total_volume"
  352. accuracy_decimals: 2
  353. unit_of_measurement: "m³"
  354. device_class: "volume"
  355. state_class: "total_increasing"
  356. icon: "mdi:water"
  357.  
  358. - name: "kalorimetr4_aktuální průtok"
  359. field: "volume_flow"
  360. accuracy_decimals: 3
  361. unit_of_measurement: "m³/h"
  362. device_class: "volume_flow_rate"
  363. state_class: "measurement"
  364. icon: "mdi:water"
  365.  
  366. - name: "kalorimetr4_target_energy"
  367. field: "target_energy"
  368. accuracy_decimals: 0
  369. unit_of_measurement: "kWh"
  370. device_class: "energy"
  371. state_class: "total_increasing"
  372. icon: "mdi:heat-pump"
  373.  
  374. - name: "kalorimetr4_target_volume"
  375. field: "target_volume"
  376. accuracy_decimals: 2
  377. unit_of_measurement: "m³"
  378. device_class: "volume"
  379. state_class: "total_increasing"
  380. icon: "mdi:water"
  381.  
  382. # =========================================================
  383. # dallas
  384. # =========================================================
  385.  
  386. - platform: dallas_temp
  387. address: 0x0000000000000000 # adresa čidla
  388. name: "Teplota 1"
  389. unit_of_measurement: "°C"
  390. accuracy_decimals: 1
  391.  
  392.  
  393. # =========================================================
  394. # RELÉ (čerpadla)
  395. # =========================================================
  396. switch:
  397. - platform: gpio
  398. pin: GPIO27
  399. id: rele1
  400. name: "Čerpadlo 1"
  401. restore_mode: ALWAYS_OFF
  402. inverted: true
  403.  
  404. - platform: gpio
  405. pin: GPIO17
  406. id: rele2
  407. name: "Čerpadlo 2"
  408. restore_mode: ALWAYS_OFF
  409. inverted: true
  410.  
  411. - platform: gpio
  412. pin: GPIO18
  413. id: rele3
  414. name: "Čerpadlo 3"
  415. restore_mode: ALWAYS_OFF
  416. inverted: true
  417.  
  418. - platform: gpio
  419. pin: GPIO19
  420. id: rele4
  421. name: "Čerpadlo 4"
  422. restore_mode: ALWAYS_OFF
  423. inverted: true
  424.  
  425. - platform: restart
  426. name: "restart esp"
  427.  
  428. # =========================================================
  429. # TERMOSTATY (suchý kontakt)
  430. # =========================================================
  431. binary_sensor:
  432.  
  433. # -------------------------
  434. # TERMOSTAT 1
  435. # -------------------------
  436. - platform: gpio
  437. pin:
  438. number: GPIO32
  439. mode: INPUT_PULLUP
  440. inverted: true
  441. name: "Termostat 1"
  442. id: termostat1
  443. filters:
  444. - delayed_on: 1000ms
  445. - delayed_off: 1000ms
  446.  
  447. on_press:
  448. then:
  449. - lambda: |-
  450. id(pump1_start) = millis();
  451. ESP_LOGI("termostat", "Termostat 1 sepnul");
  452. - logger.log:
  453. level: INFO
  454. format: "Zapinam Rele 1"
  455. - switch.turn_on: rele1
  456.  
  457. on_release:
  458. then:
  459. - logger.log:
  460. level: INFO
  461. format: "Termostat 1 rozepnul – cekam na minimalni dobu behu Rele 1"
  462. - script.execute: vypnuti1
  463.  
  464.  
  465. # -------------------------
  466. # TERMOSTAT 2
  467. # -------------------------
  468. - platform: gpio
  469. pin:
  470. number: GPIO33
  471. mode: INPUT_PULLUP
  472. inverted: true
  473. name: "Termostat 2"
  474. id: termostat2
  475. filters:
  476. - delayed_on: 1000ms
  477. - delayed_off: 1000ms
  478.  
  479. on_press:
  480. then:
  481. - lambda: |-
  482. id(pump2_start) = millis();
  483. ESP_LOGI("termostat", "Termostat 2 sepnul");
  484. - logger.log:
  485. level: INFO
  486. format: "Zapinam Rele 2"
  487. - switch.turn_on: rele2
  488.  
  489. on_release:
  490. then:
  491. - logger.log:
  492. level: INFO
  493. format: "Termostat 2 rozepnul – cekam na minimalni dobu behu Rele 2"
  494. - script.execute: vypnuti2
  495.  
  496.  
  497. # -------------------------
  498. # TERMOSTAT 3
  499. # -------------------------
  500. - platform: gpio
  501. pin:
  502. number: GPIO25
  503. mode: INPUT_PULLUP
  504. inverted: true
  505. name: "Termostat 3"
  506. id: termostat3
  507. filters:
  508. - delayed_on: 1000ms
  509. - delayed_off: 1000ms
  510.  
  511. on_press:
  512. then:
  513. - lambda: |-
  514. id(pump3_start) = millis();
  515. ESP_LOGI("termostat", "Termostat 3 sepnul");
  516. - logger.log:
  517. level: INFO
  518. format: "Zapinam Rele 3"
  519. - switch.turn_on: rele3
  520.  
  521. on_release:
  522. then:
  523. - logger.log:
  524. level: INFO
  525. format: "Termostat 3 rozepnul – cekam na minimalni dobu behu Rele 3"
  526. - script.execute: vypnuti3
  527.  
  528.  
  529. # -------------------------
  530. # TERMOSTAT 4
  531. # -------------------------
  532. - platform: gpio
  533. pin:
  534. number: GPIO26
  535. mode: INPUT_PULLUP
  536. inverted: true
  537. name: "Termostat 4"
  538. id: termostat4
  539. filters:
  540. - delayed_on: 1000ms
  541. - delayed_off: 1000ms
  542.  
  543. on_press:
  544. then:
  545. - lambda: |-
  546. id(pump4_start) = millis();
  547. ESP_LOGI("termostat", "Termostat 4 sepnul");
  548. - logger.log:
  549. level: INFO
  550. format: "Zapinam Rele 4"
  551. - switch.turn_on: rele4
  552.  
  553. on_release:
  554. then:
  555. - logger.log:
  556. level: INFO
  557. format: "Termostat 4 rozepnul – cekam na minimalni dobu behu Rele 4"
  558. - script.execute: vypnuti4
  559.  
  560.  
  561. # =========================================================
  562. # MINIMÁLNÍ DOBA BĚHU 2 MINUTY (120 000 ms)
  563. # =========================================================
  564. script:
  565.  
  566. - id: vypnuti1
  567. mode: restart
  568. then:
  569. - lambda: |-
  570. unsigned long elapsed = millis() - id(pump1_start);
  571. unsigned long remaining = (elapsed < 120000) ? (120000 - elapsed) / 1000 : 0;
  572. ESP_LOGI("script", "Rele 1: uz bezi %lu s, cekam jeste %lu s", elapsed / 1000, remaining);
  573. - wait_until:
  574. condition:
  575. lambda: 'return (millis() - id(pump1_start)) >= 120000;'
  576. timeout: 200s
  577. - if:
  578. condition:
  579. binary_sensor.is_on: termostat1
  580. then:
  581. - logger.log:
  582. level: WARN
  583. format: "Rele 1 – termostat stale sepnuty, NEVYPINAM!"
  584. else:
  585. - logger.log:
  586. level: INFO
  587. format: "Vypinam Rele 1 – minimalni doba behu splnena"
  588. - switch.turn_off: rele1
  589.  
  590. - id: vypnuti2
  591. mode: restart
  592. then:
  593. - lambda: |-
  594. unsigned long elapsed = millis() - id(pump2_start);
  595. unsigned long remaining = (elapsed < 120000) ? (120000 - elapsed) / 1000 : 0;
  596. ESP_LOGI("script", "Rele 2: uz bezi %lu s, cekam jeste %lu s", elapsed / 1000, remaining);
  597. - wait_until:
  598. condition:
  599. lambda: 'return (millis() - id(pump2_start)) >= 120000;'
  600. timeout: 200s
  601. - if:
  602. condition:
  603. binary_sensor.is_on: termostat2
  604. then:
  605. - logger.log:
  606. level: WARN
  607. format: "Rele 2 – termostat stale sepnuty, NEVYPINAM!"
  608. else:
  609. - logger.log:
  610. level: INFO
  611. format: "Vypinam Rele 2 – minimalni doba behu splnena"
  612. - switch.turn_off: rele2
  613.  
  614. - id: vypnuti3
  615. mode: restart
  616. then:
  617. - lambda: |-
  618. unsigned long elapsed = millis() - id(pump3_start);
  619. unsigned long remaining = (elapsed < 120000) ? (120000 - elapsed) / 1000 : 0;
  620. ESP_LOGI("script", "Rele 3: uz bezi %lu s, cekam jeste %lu s", elapsed / 1000, remaining);
  621. - wait_until:
  622. condition:
  623. lambda: 'return (millis() - id(pump3_start)) >= 120000;'
  624. timeout: 200s
  625. - if:
  626. condition:
  627. binary_sensor.is_on: termostat3
  628. then:
  629. - logger.log:
  630. level: WARN
  631. format: "Rele 3 – termostat stale sepnuty, NEVYPINAM!"
  632. else:
  633. - logger.log:
  634. level: INFO
  635. format: "Vypinam Rele 3 – minimalni doba behu splnena"
  636. - switch.turn_off: rele3
  637.  
  638. - id: vypnuti4
  639. mode: restart
  640. then:
  641. - lambda: |-
  642. unsigned long elapsed = millis() - id(pump4_start);
  643. unsigned long remaining = (elapsed < 120000) ? (120000 - elapsed) / 1000 : 0;
  644. ESP_LOGI("script", "Rele 4: uz bezi %lu s, cekam jeste %lu s", elapsed / 1000, remaining);
  645. - wait_until:
  646. condition:
  647. lambda: 'return (millis() - id(pump4_start)) >= 120000;'
  648. timeout: 200s
  649. - if:
  650. condition:
  651. binary_sensor.is_on: termostat4
  652. then:
  653. - logger.log:
  654. level: WARN
  655. format: "Rele 4 – termostat stale sepnuty, NEVYPINAM!"
  656. else:
  657. - logger.log:
  658. level: INFO
  659. format: "Vypinam Rele 4 – minimalni doba behu splnena"
  660. - switch.turn_off: rele4
  661.  
  662.  
  663. captive_portal:
  664.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!