Advertisement
Guest User

SMART SDA

a guest
Nov 6th, 2017
104
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.39 KB | None | 0 0
  1. root@ubuntu:~# hdparm -t /dev/sda
  2.  
  3. /dev/sda:
  4. Timing buffered disk reads: ^C
  5. root@ubuntu:~# smartctl -a /dev/sda
  6. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-87-generic] (local build)
  7. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  8.  
  9. === START OF INFORMATION SECTION ===
  10. Model Family: Crucial/Micron RealSSD m4/C400
  11. Device Model: M4-CT128M4SSD2
  12. Serial Number: 0000000012390916B184
  13. LU WWN Device Id: 5 00a075 10916b184
  14. Firmware Version: 000F
  15. User Capacity: 128,035,676,160 bytes [128 GB]
  16. Sector Size: 512 bytes logical/physical
  17. Rotation Rate: Solid State Device
  18. Form Factor: 2.5 inches
  19. Device is: In smartctl database [for details use: -P show]
  20. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
  21. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  22. Local Time is: Mon Nov 6 10:32:06 2017 GMT
  23.  
  24. ==> WARNING: This drive may hang after 5184 hours of power-on time:
  25. http://www.tomshardware.com/news/Crucial-m4-Firmware-BSOD,14544.html
  26. See the following web pages for firmware updates:
  27. http://www.crucial.com/support/firmware.aspx
  28. http://www.micron.com/products/solid-state-storage/client-ssd#software
  29.  
  30. SMART support is: Available - device has SMART capability.
  31. SMART support is: Enabled
  32.  
  33. === START OF READ SMART DATA SECTION ===
  34. SMART overall-health self-assessment test result: PASSED
  35.  
  36. General SMART Values:
  37. Offline data collection status: (0x85) Offline data collection activity
  38. was aborted by an interrupting command from host.
  39. Auto Offline Data Collection: Enabled.
  40. Self-test execution status: ( 0) The previous self-test routine completed
  41. without error or no self-test has ever
  42. been run.
  43. Total time to complete Offline
  44. data collection: ( 595) seconds.
  45. Offline data collection
  46. capabilities: (0x7b) SMART execute Offline immediate.
  47. Auto Offline data collection on/off support.
  48. Suspend Offline collection upon new
  49. command.
  50. Offline surface scan supported.
  51. Self-test supported.
  52. Conveyance Self-test supported.
  53. Selective Self-test supported.
  54. SMART capabilities: (0x0003) Saves SMART data before entering
  55. power-saving mode.
  56. Supports SMART auto save timer.
  57. Error logging capability: (0x01) Error logging supported.
  58. General Purpose Logging supported.
  59. Short self-test routine
  60. recommended polling time: ( 2) minutes.
  61. Extended self-test routine
  62. recommended polling time: ( 9) minutes.
  63. Conveyance self-test routine
  64. recommended polling time: ( 3) minutes.
  65. SCT capabilities: (0x003d) SCT Status supported.
  66. SCT Error Recovery Control supported.
  67. SCT Feature Control supported.
  68. SCT Data Table supported.
  69.  
  70. SMART Attributes Data Structure revision number: 16
  71. Vendor Specific SMART Attributes with Thresholds:
  72. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  73. 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
  74. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  75. 9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 2648
  76. 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 182
  77. 170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
  78. 171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
  79. 172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
  80. 173 Wear_Leveling_Count 0x0033 100 100 010 Pre-fail Always - 11
  81. 174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 173
  82. 181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 519 274 244
  83. 183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
  84. 184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
  85. 187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
  86. 188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
  87. 189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 85
  88. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
  89. 195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0
  90. 196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
  91. 197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
  92. 198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
  93. 199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
  94. 202 Perc_Rated_Life_Used 0x0018 100 100 001 Old_age Offline - 0
  95. 206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
  96.  
  97. SMART Error Log Version: 1
  98. No Errors Logged
  99.  
  100. SMART Self-test log structure revision number 1
  101. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  102. # 1 Extended offline Completed without error 00% 2647 -
  103. # 2 Vendor (0xff) Completed without error 00% 2634 -
  104.  
  105. SMART Selective self-test log data structure revision number 1
  106. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  107. 1 0 0 Not_testing
  108. 2 0 0 Not_testing
  109. 3 0 0 Not_testing
  110. 4 0 0 Not_testing
  111. 5 0 0 Not_testing
  112. Selective self-test flags (0x0):
  113. After scanning selected spans, do NOT read-scan remainder of disk.
  114. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement