Guest User

Untitled

a guest
Apr 3rd, 2017
109
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.58 KB | None | 0 0
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.13.0-115-generic (buildd@lgw01-51) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #162-Ubuntu SMP Fri Mar 24 16:03:51 UTC 2017 (Ubuntu 3.13.0-115.162-generic 3.13.11-ckt39)
  5. [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-115-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty1 console=ttyS0
  6. [ 0.000000] KERNEL supported cpus:
  7. [ 0.000000] Intel GenuineIntel
  8. [ 0.000000] AMD AuthenticAMD
  9. [ 0.000000] Centaur CentaurHauls
  10. [ 0.000000] e820: BIOS-provided physical RAM map:
  11. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  12. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
  17. [ 0.000000] NX (Execute Disable) protection: active
  18. [ 0.000000] SMBIOS 2.8 present.
  19. [ 0.000000] No AGP bridge found
  20. [ 0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
  21. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  22. [ 0.000000] found SMP MP-table at [mem 0x000f6600-0x000f660f] mapped at [ffff8800000f6600]
  23. [ 0.000000] Scanning 1 areas for low memory corruption
  24. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  25. [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
  26. [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
  27. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
  28. [ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7ffdffff]
  29. [ 0.000000] RAMDISK: [mem 0x34e7e000-0x36736fff]
  30. [ 0.000000] ACPI: RSDP 00000000000f63b0 000014 (v00 BOCHS )
  31. [ 0.000000] ACPI: RSDT 000000007ffe1737 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
  32. [ 0.000000] ACPI: FACP 000000007ffe0c14 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
  33. [ 0.000000] ACPI: DSDT 000000007ffe0040 000BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
  34. [ 0.000000] ACPI: FACS 000000007ffe0000 000040
  35. [ 0.000000] ACPI: SSDT 000000007ffe0c88 0009F7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
  36. [ 0.000000] ACPI: APIC 000000007ffe167f 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
  37. [ 0.000000] ACPI: HPET 000000007ffe16ff 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
  38. [ 0.000000] No NUMA configuration found
  39. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
  40. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffdffff]
  41. [ 0.000000] NODE_DATA [mem 0x7ffdb000-0x7ffdffff]
  42. [ 0.000000] Zone ranges:
  43. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  44. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  45. [ 0.000000] Normal empty
  46. [ 0.000000] Movable zone start for each node
  47. [ 0.000000] Early memory node ranges
  48. [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
  49. [ 0.000000] node 0: [mem 0x00100000-0x7ffdffff]
  50. [ 0.000000] ACPI: PM-Timer IO Port: 0x608
  51. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  52. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  53. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
  54. [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
  55. [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
  56. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  57. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
  58. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  59. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
  60. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
  61. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  62. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  63. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  64. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  65. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
  66. [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  67. [ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices
  68. [ 0.000000] Booting paravirtualized kernel on bare hardware
  69. [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
  70. [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81536 r8192 d20864 u1048576
  71. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515945
  72. [ 0.000000] Policy zone: DMA32
  73. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-115-generic root=LABEL=cloudimg-rootfs ro nofb nomodeset vga=normal console=tty1 console=ttyS0
  74. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.000000] Checking aperture...
  76. [ 0.000000] No AGP bridge found
  77. [ 0.000000] Memory: 2021684K/2096632K available (7432K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 74948K reserved)
  78. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  79. [ 0.000000] Hierarchical RCU implementation.
  80. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  81. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
  82. [ 0.000000] Offload RCU callbacks from all CPUs
  83. [ 0.000000] Offload RCU callbacks from CPUs: 0-1.
  84. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16
  85. [ 0.000000] Console: colour VGA+ 80x25
  86. [ 0.000000] console [tty1] enabled
  87. [ 0.000000] console [ttyS0] enabled
  88. [ 0.000000] allocated 8388608 bytes of page_cgroup
  89. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  90. [ 0.000000] tsc: Fast TSC calibration failed
  91. [ 0.000000] tsc: Unable to calibrate against PIT
  92. [ 0.000000] tsc: using HPET reference calibration
  93. [ 0.000000] tsc: Detected 2600.030 MHz processor
  94. [ 0.028571] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.06 BogoMIPS (lpj=10400120)
  95. [ 0.029546] pid_max: default: 32768 minimum: 301
  96. [ 0.031090] Security Framework initialized
  97. [ 0.034164] AppArmor: AppArmor initialized
  98. [ 0.034411] Yama: becoming mindful.
  99. [ 0.041593] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  100. [ 0.046434] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  101. [ 0.048518] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  102. [ 0.048977] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  103. [ 0.057142] Initializing cgroup subsys memory
  104. [ 0.057895] Initializing cgroup subsys devices
  105. [ 0.058194] Initializing cgroup subsys freezer
  106. [ 0.058493] Initializing cgroup subsys blkio
  107. [ 0.058746] Initializing cgroup subsys perf_event
  108. [ 0.059044] Initializing cgroup subsys hugetlb
  109. [ 0.062085] mce: CPU supports 10 MCE banks
  110. [ 0.063398] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
  111. [ 0.063398] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
  112. [ 0.063398] tlb_flushall_shift: 6
  113. [ 0.066941] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
  114. [ 0.076577] ACPI: Core revision 20131115
  115. [ 0.101680] ACPI: All ACPI Tables successfully acquired
  116. [ 0.102804] ftrace: allocating 28674 entries in 113 pages
  117. [ 0.202953] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  118. [ 0.243757] smpboot: CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) (fam: 06, model: 2c, stepping: 01)
  119. [ 0.248000] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
  120. [ 0.270064] NMI watchdog: disabled (cpu0): hardware events not enabled
  121. [ 0.274027] x86: Booting SMP configuration:
  122. [ 0.274317] .... node #0, CPUs: #1
  123. [ 0.377579] x86: Booted up 1 node, 2 CPUs
  124. [ 0.377975] smpboot: Total of 2 processors activated (10565.83 BogoMIPS)
  125. [ 0.397523] devtmpfs: initialized
  126. [ 0.419034] EVM: security.selinux
  127. [ 0.419293] EVM: security.SMACK64
  128. [ 0.419448] EVM: security.ima
  129. [ 0.419591] EVM: security.capability
  130. [ 0.432063] pinctrl core: initialized pinctrl subsystem
  131. [ 0.436964] regulator-dummy: no parameters
  132. [ 0.438121] RTC time: 12:34:45, date: 04/03/17
  133. [ 0.439952] NET: Registered protocol family 16
  134. [ 0.444322] cpuidle: using governor ladder
  135. [ 0.444619] cpuidle: using governor menu
  136. [ 0.445495] ACPI: bus type PCI registered
  137. [ 0.445867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  138. [ 0.448335] PCI: Using configuration type 1 for base access
  139. [ 0.450898] mtrr: your CPUs had inconsistent fixed MTRR settings
  140. [ 0.451332] mtrr: your CPUs had inconsistent variable MTRR settings
  141. [ 0.451604] mtrr: your CPUs had inconsistent MTRRdefType settings
  142. [ 0.451844] mtrr: probably your BIOS does not setup all CPUs.
  143. [ 0.452044] mtrr: corrected configuration.
  144. [ 0.472069] bio: create slab <bio-0> at 0
  145. [ 0.474202] ACPI: Added _OSI(Module Device)
  146. [ 0.476049] ACPI: Added _OSI(Processor Device)
  147. [ 0.476247] ACPI: Added _OSI(3.0 _SCP Extensions)
  148. [ 0.476706] ACPI: Added _OSI(Processor Aggregator Device)
  149. [ 0.507538] ACPI: Interpreter enabled
  150. [ 0.508000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
  151. [ 0.508661] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
  152. [ 0.510345] ACPI: (supports S0 S3 S4 S5)
  153. [ 0.510756] ACPI: Using IOAPIC for interrupt routing
  154. [ 0.512556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  155. [ 0.520036] ACPI: No dock devices found.
  156. [ 0.576000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  157. [ 0.576383] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  158. [ 0.576857] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  159. [ 0.578304] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  160. [ 0.586182] acpiphp: Slot [3] registered
  161. [ 0.586575] acpiphp: Slot [4] registered
  162. [ 0.586957] acpiphp: Slot [5] registered
  163. [ 0.587348] acpiphp: Slot [6] registered
  164. [ 0.587707] acpiphp: Slot [7] registered
  165. [ 0.588000] acpiphp: Slot [8] registered
  166. [ 0.588000] acpiphp: Slot [9] registered
  167. [ 0.588000] acpiphp: Slot [10] registered
  168. [ 0.588000] acpiphp: Slot [11] registered
  169. [ 0.588000] acpiphp: Slot [12] registered
  170. [ 0.588000] acpiphp: Slot [13] registered
  171. [ 0.588000] acpiphp: Slot [14] registered
  172. [ 0.588198] acpiphp: Slot [15] registered
  173. [ 0.588535] acpiphp: Slot [16] registered
  174. [ 0.588889] acpiphp: Slot [17] registered
  175. [ 0.589230] acpiphp: Slot [18] registered
  176. [ 0.592077] acpiphp: Slot [19] registered
  177. [ 0.592423] acpiphp: Slot [20] registered
  178. [ 0.592764] acpiphp: Slot [21] registered
  179. [ 0.593291] acpiphp: Slot [22] registered
  180. [ 0.593635] acpiphp: Slot [23] registered
  181. [ 0.594071] acpiphp: Slot [24] registered
  182. [ 0.594461] acpiphp: Slot [25] registered
  183. [ 0.594821] acpiphp: Slot [26] registered
  184. [ 0.595159] acpiphp: Slot [27] registered
  185. [ 0.595501] acpiphp: Slot [28] registered
  186. [ 0.595845] acpiphp: Slot [29] registered
  187. [ 0.596000] acpiphp: Slot [30] registered
  188. [ 0.596204] acpiphp: Slot [31] registered
  189. [ 0.596576] PCI host bridge to bus 0000:00
  190. [ 0.596901] pci_bus 0000:00: root bus resource [bus 00-ff]
  191. [ 0.597303] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  192. [ 0.597608] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  193. [ 0.597894] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  194. [ 0.598182] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
  195. [ 0.625951] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
  196. [ 0.626488] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
  197. [ 0.710235] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
  198. [ 0.712026] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
  199. [ 0.713395] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
  200. [ 0.714677] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
  201. [ 0.715455] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
  202. [ 0.719383] ACPI: Enabled 16 GPEs in block 00 to 0F
  203. [ 0.724565] vgaarb: setting as boot device: PCI:0000:00:02.0
  204. [ 0.724940] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  205. [ 0.725298] vgaarb: loaded
  206. [ 0.725501] vgaarb: bridge control possible 0000:00:02.0
  207. [ 0.732453] SCSI subsystem initialized
  208. [ 0.733394] ACPI: bus type USB registered
  209. [ 0.734211] usbcore: registered new interface driver usbfs
  210. [ 0.734758] usbcore: registered new interface driver hub
  211. [ 0.736308] usbcore: registered new device driver usb
  212. [ 0.740494] PCI: Using ACPI for IRQ routing
  213. [ 0.748350] NetLabel: Initializing
  214. [ 0.748569] NetLabel: domain hash size = 128
  215. [ 0.748763] NetLabel: protocols = UNLABELED CIPSOv4
  216. [ 0.750237] NetLabel: unlabeled traffic allowed by default
  217. [ 0.750728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  218. [ 0.752063] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
  219. [ 0.756867] Switched to clocksource hpet
  220. [ 0.866094] AppArmor: AppArmor Filesystem Enabled
  221. [ 0.867505] pnp: PnP ACPI init
  222. [ 0.867911] ACPI: bus type PNP registered
  223. [ 0.878227] pnp: PnP ACPI: found 10 devices
  224. [ 0.878513] ACPI: bus type PNP unregistered
  225. [ 0.910897] NET: Registered protocol family 2
  226. [ 0.919452] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  227. [ 0.922110] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  228. [ 0.922798] TCP: Hash tables configured (established 16384 bind 16384)
  229. [ 0.923510] TCP: reno registered
  230. [ 0.923952] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  231. [ 0.924737] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  232. [ 0.926567] NET: Registered protocol family 1
  233. [ 0.927095] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  234. [ 0.927409] pci 0000:00:01.0: PIIX3: Enabling Passive Release
  235. [ 0.927925] pci 0000:00:01.0: Activating ISA DMA hang workarounds
  236. [ 1.343284] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  237. [ 1.767820] Trying to unpack rootfs image as initramfs...
  238. [ 4.107341] Freeing initrd memory: 25316K (ffff880034e7e000 - ffff880036737000)
  239. [ 4.112176] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x0
  240. [ 4.112946] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x0
  241. [ 4.114486] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  242. [ 4.114879] Scanning for low memory corruption every 60 seconds
  243. [ 4.124694] Initialise system trusted keyring
  244. [ 4.126406] audit: initializing netlink socket (disabled)
  245. [ 4.127284] type=2000 audit(1491222889.124:1): initialized
  246. [ 4.255443] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  247. [ 4.274737] zbud: loaded
  248. [ 4.277710] VFS: Disk quotas dquot_6.5.2
  249. [ 4.278561] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  250. [ 4.288668] fuse init (API version 7.22)
  251. [ 4.290041] msgmni has been set to 3998
  252. [ 4.291201] Key type big_key registered
  253. [ 4.301127] Key type asymmetric registered
  254. [ 4.301372] Asymmetric key parser 'x509' registered
  255. [ 4.302076] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  256. [ 4.303021] io scheduler noop registered
  257. [ 4.303242] io scheduler deadline registered (default)
  258. [ 4.303881] io scheduler cfq registered
  259. [ 4.306029] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  260. [ 4.307493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  261. [ 4.309412] ipmi message handler version 39.2
  262. [ 4.311321] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  263. [ 4.312408] ACPI: Power Button [PWRF]
  264. [ 4.314933] GHES: HEST is not enabled!
  265. [ 4.734030] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
  266. [ 5.116672] tsc: Refined TSC clocksource calibration: 2600.011 MHz
  267. [ 5.585108] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
  268. [ 5.994622] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
  269. [ 6.000621] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  270. [ 6.024378] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  271. [ 6.047318] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
  272. [ 6.063912] Linux agpgart interface v0.103
  273. [ 6.082414] brd: module loaded
  274. [ 6.090558] loop: module loaded
  275. [ 6.094400] blk-mq: CPU -> queue map
  276. [ 6.094601] CPU 0 -> Queue 0
  277. [ 6.094750] CPU 1 -> Queue 0
  278. [ 6.106610] vda: vda1
  279. [ 6.113746] blk-mq: CPU -> queue map
  280. [ 6.113940] CPU 0 -> Queue 0
  281. [ 6.114089] CPU 1 -> Queue 0
  282. [ 6.119338] Switched to clocksource tsc
  283. [ 6.120218] vdb: unknown partition table
  284. [ 6.131545] scsi0 : ata_piix
  285. [ 6.133098] scsi1 : ata_piix
  286. [ 6.133764] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
  287. [ 6.134081] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
  288. [ 6.139872] libphy: Fixed MDIO Bus: probed
  289. [ 6.145156] tun: Universal TUN/TAP device driver, 1.6
  290. [ 6.145385] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  291. [ 6.152337] PPP generic driver version 2.4.2
  292. [ 6.154127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  293. [ 6.154503] ehci-pci: EHCI PCI platform driver
  294. [ 6.154906] ehci-platform: EHCI generic platform driver
  295. [ 6.155313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  296. [ 6.155591] ohci-pci: OHCI PCI platform driver
  297. [ 6.156181] ohci-platform: OHCI generic platform driver
  298. [ 6.156509] uhci_hcd: USB Universal Host Controller Interface driver
  299. [ 6.301378] ata2.01: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
  300. [ 6.344942] ata2.01: configured for MWDMA2
  301. [ 6.388052] scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
  302. [ 6.429597] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
  303. [ 6.430077] cdrom: Uniform CD-ROM driver Revision: 3.20
  304. [ 6.439045] sr 1:0:1:0: Attached scsi generic sg0 type 5
  305. [ 6.593775] uhci_hcd 0000:00:01.2: UHCI Host Controller
  306. [ 6.594466] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
  307. [ 6.595500] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
  308. [ 6.600375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  309. [ 6.600767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  310. [ 6.601076] usb usb1: Product: UHCI Host Controller
  311. [ 6.601303] usb usb1: Manufacturer: Linux 3.13.0-115-generic uhci_hcd
  312. [ 6.601576] usb usb1: SerialNumber: 0000:00:01.2
  313. [ 6.606123] hub 1-0:1.0: USB hub found
  314. [ 6.606797] hub 1-0:1.0: 2 ports detected
  315. [ 6.612010] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  316. [ 6.615164] serio: i8042 KBD port at 0x60,0x64 irq 1
  317. [ 6.615588] serio: i8042 AUX port at 0x60,0x64 irq 12
  318. [ 6.618405] mousedev: PS/2 mouse device common for all mice
  319. [ 6.621911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  320. [ 6.624704] rtc_cmos 00:00: RTC can wake from S4
  321. [ 6.627273] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
  322. [ 6.628159] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
  323. [ 6.629656] device-mapper: uevent: version 1.0.3
  324. [ 6.631313] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
  325. [ 6.632440] ledtrig-cpu: registered to indicate activity on CPUs
  326. [ 6.634426] TCP: cubic registered
  327. [ 6.635816] NET: Registered protocol family 10
  328. [ 6.640465] NET: Registered protocol family 17
  329. [ 6.640465] Key type dns_resolver registered
  330. [ 6.648221] Loading compiled-in X.509 certificates
  331. [ 6.658585] Loaded X.509 cert 'Magrathea: Glacier signing key: fc5c062e7a09661b8e45d9c8370957b68da6f712'
  332. [ 6.659271] registered taskstats version 1
  333. [ 6.849635] Key type trusted registered
  334. [ 6.926087] usb 1-1: new full-speed USB device number 2 using uhci_hcd
  335. [ 7.073151] Key type encrypted registered
  336. [ 7.073543] AppArmor: AppArmor sha1 policy hashing enabled
  337. [ 7.073930] IMA: No TPM chip found, activating TPM-bypass!
  338. [ 7.079505] regulator-dummy: disabling
  339. [ 7.082168] Magic number: 13:512:581
  340. [ 7.083598] rtc_cmos 00:00: setting system clock to 2017-04-03 12:34:52 UTC (1491222892)
  341. [ 7.086812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  342. [ 7.087122] EDD information not available.
  343. [ 7.114204] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
  344. [ 7.114577] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
  345. [ 7.114865] usb 1-1: Product: QEMU USB Tablet
  346. [ 7.115056] usb 1-1: Manufacturer: QEMU
  347. [ 7.116547] usb 1-1: SerialNumber: 42
  348. [ 7.145297] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
  349. [ 7.145763] Write protecting the kernel read-only data: 12288k
  350. [ 7.150538] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
  351. [ 7.167809] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
  352. Loading, please wait...
  353. [ 7.841481] systemd-udevd[107]: starting version 204
  354. [ 8.832888] FDC 0 is a S82078B
  355. [ 8.896366] [drm] Initialized drm 1.1.0 20060810
  356. [ 9.080001] hidraw: raw HID events driver (C) Jiri Kosina
  357. [ 9.298224] usbcore: registered new interface driver usbhid
  358. [ 9.298561] usbhid: USB HID core driver
  359. [ 10.458002] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
  360. [ 10.697712] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
  361. [ 10.708926] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
  362. Begin: Loading essential drivers ... done.
  363. Begin: Running /scripts/init-premount ... done.
  364. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  365. Begin: Running /scripts/local-premount ... done.
  366. [ 13.973348] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
  367. Begin: Running /scripts/local-bottom ... done.
  368. done.
  369. Begin: Running /scripts/init-bottom ... done.
  370. [ 16.227973] random: init urandom read with 34 bits of entropy available
  371. * Starting Mount filesystems on boot[74G[ OK ]
  372. * Starting Fix-up sensitive /proc filesystem entries[74G[ OK ]
  373. * Stopping Fix-up sensitive /proc filesystem entries[74G[ OK ]
  374. * Starting Populate /dev filesystem[74G[ OK ]
  375. * Starting Populate and link to /run filesystem[74G[ OK ]
  376. * Stopping Send an event to indicate plymouth is up[74G[ OK ]
  377. * Stopping Populate /dev filesystem[74G[ OK ]
  378. * Stopping Populate and link to /run filesystem[74G[ OK ]
  379. * Starting Fix-up /sys/kernel/debug filesystem[74G[ OK ]
  380. * Stopping Track if upstart is running in a container[74G[ OK ]
  381. * Stopping Fix-up /sys/kernel/debug filesystem[74G[ OK ]
  382. [ 25.875650] EXT4-fs (vda1): re-mounted. Opts: (null)
  383. * Starting Signal sysvinit that the rootfs is mounted[74G[ OK ]
  384. * Starting Initialize or finalize resolvconf[74G[ OK ]
  385. * Starting Clean /tmp directory[74G[ OK ]
  386. * Stopping Clean /tmp directory[74G[ OK ]
  387. Cloud-init v. 0.7.5 running 'init-local' at Mon, 03 Apr 2017 12:35:28 +0000. Up 43.27 seconds.
  388. cloud-init-nonet[48.17]: waiting 10 seconds for network device
  389. * Starting set console keymap[74G[ OK ]
  390. * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
  391. * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
  392. * Starting set sysctls from /etc/sysctl.conf[74G[ OK ]
  393. * Starting Signal sysvinit that remote filesystems are mounted[74G[ OK ]
  394. * Stopping set sysctls from /etc/sysctl.conf[74G[ OK ]
  395. * Starting Bridge udev events into upstart[74G[ OK ]
  396. * Starting device node and kernel event manager[74G[ OK ]
  397. * Starting load modules from /etc/modules[74G[ OK ]
  398. * Starting cold plug devices[74G[ OK ]
  399. * Starting log initial device creation[74G[ OK ]
  400. * Stopping set console keymap[74G[ OK ]
  401. cloud-init-nonet[59.09]: waiting 120 seconds for network device
  402. * Stopping load modules from /etc/modules[74G[ OK ]
  403. * Starting configure network device used by iSCSI root[74G[ OK ]
  404. * Starting Uncomplicated firewall[74G[ OK ]
  405. * Starting configure network device security[74G[ OK ]
  406. * Stopping cold plug devices[74G[ OK ]
  407. * Stopping log initial device creation[74G[ OK ]
  408. * Starting load fallback graphics devices[74G[ OK ]
  409. * Stopping load fallback graphics devices[74G[ OK ]
  410. * Starting enable remaining boot-time encrypted block devices[74G[ OK ]
  411. * Starting configure network device security[74G[ OK ]
  412. * Starting Mount network filesystems[74G[ OK ]
  413. * Stopping Mount network filesystems[74G[ OK ]
  414. * Starting Bridge socket events into upstart[74G[ OK ]
  415. * Starting configure network device[74G[ OK ]
  416. * Starting Mount network filesystems[74G[ OK ]
  417. * Stopping Mount network filesystems[74G[ OK ]
  418. cloud-init-nonet[165.71]: static networking is now up
  419. * Starting configure network device[74G[ OK ]
  420. * Starting set sysctls from /etc/sysctl.conf[74G[ OK ]
  421. * Stopping set sysctls from /etc/sysctl.conf[74G[ OK ]
  422. Cloud-init v. 0.7.5 running 'init' at Mon, 03 Apr 2017 12:37:45 +0000. Up 180.43 seconds.
  423. ci-info: ++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++
  424. ci-info: +--------+------+-------------+---------------+-------------------+
  425. ci-info: | Device | Up | Address | Mask | Hw-Address |
  426. ci-info: +--------+------+-------------+---------------+-------------------+
  427. ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | . |
  428. ci-info: | eth0 | True | 192.168.1.5 | 255.255.255.0 | fa:16:3e:9b:8d:f5 |
  429. ci-info: +--------+------+-------------+---------------+-------------------+
  430. ci-info: ++++++++++++++++++++++++++++++++++Route info+++++++++++++++++++++++++++++++++++
  431. ci-info: +-------+-----------------+-------------+-----------------+-----------+-------+
  432. ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
  433. ci-info: +-------+-----------------+-------------+-----------------+-----------+-------+
  434. ci-info: | 0 | 0.0.0.0 | 192.168.1.1 | 0.0.0.0 | eth0 | UG |
  435. ci-info: | 1 | 169.254.169.254 | 192.168.1.1 | 255.255.255.255 | eth0 | UGH |
  436. ci-info: | 2 | 192.168.1.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
  437. ci-info: +-------+-----------------+-------------+-----------------+-----------+-------+
  438. Generating public/private rsa key pair.
  439. Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
  440. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
  441. The key fingerprint is:
  442. 62:e1:14:19:c3:64:d8:1c:3b:ce:62:04:e1:9f:d8:44 root@testtrove
  443. The key's randomart image is:
  444. +--[ RSA 2048]----+
  445. | o.E*B+ |
  446. | . o..=+ |
  447. | . o = |
  448. | * * o |
  449. | . * * S |
  450. | . o . |
  451. | |
  452. | |
  453. | |
  454. +-----------------+
  455. Generating public/private dsa key pair.
  456. Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
  457. Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
  458. The key fingerprint is:
  459. b7:bb:28:fa:b0:15:18:8f:98:87:05:b7:59:0d:ad:b9 root@testtrove
  460. The key's randomart image is:
  461. +--[ DSA 1024]----+
  462. | . . o+ |
  463. | o + o |
  464. | = o |
  465. | = =o |
  466. | + + o.S . |
  467. | . E. . . |
  468. | . . . |
  469. | +. . . |
  470. | oo... o. |
  471. +-----------------+
  472. Generating public/private ecdsa key pair.
  473. Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.
  474. Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.
  475. The key fingerprint is:
  476. b7:2c:8b:55:d0:96:2d:54:c7:39:c9:1a:27:c9:5c:cd root@testtrove
  477. The key's randomart image is:
  478. +--[ECDSA 256]---+
  479. | .+.=o= |
  480. | o o*.B E|
  481. | . = .= . |
  482. | o .. |
  483. | S o |
  484. | + . |
  485. | o o |
  486. | o o |
  487. | . . |
  488. +-----------------+
  489. Generating public/private ed25519 key pair.
  490. Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.
  491. Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.
  492. The key fingerprint is:
  493. de:db:32:fb:80:a9:f1:40:cf:6b:c0:c4:20:9f:35:45 root@testtrove
  494. The key's randomart image is:
  495. +--[ED25519 256--+
  496. | oE |
  497. | . . o |
  498. | o = . |
  499. | o o |
  500. | o. S |
  501. | .o+ + |
  502. | o.* o |
  503. | =..o+ |
  504. | ..o o=o |
  505. +-----------------+
  506. * Starting Signal sysvinit that local filesystems are mounted[74G[ OK ]
  507. * Starting configure network device security[74G[ OK ]
  508. * Starting flush early job output to logs[74G[ OK ]
  509. * Starting save udev log and update rules[74G[ OK ]
  510. * Stopping Failsafe Boot Delay[74G[ OK ]
  511. * Stopping Mount filesystems on boot[74G[ OK ]
  512. * Starting System V initialisation compatibility[74G[ OK ]
  513. * Stopping flush early job output to logs[74G[ OK ]
  514. * Stopping save udev log and update rules[74G[ OK ]
  515. * Starting D-Bus system message bus[74G[ OK ]
  516. * Starting Bridge file events into upstart[74G[ OK ]
  517. * Starting SystemD login management service[74G[ OK ]
  518. * Starting system logging daemon[74G[ OK ]
  519. * Starting Handle applying cloud-config[74G[ OK ]
  520. * Starting configure virtual network devices[74G[ OK ]
  521. * Starting Pollinate to seed the pseudo random number generator[74G[ OK ]
  522. * Stopping Pollinate to seed the pseudo random number generator[74G[ OK ]
  523. * Starting early crypto disks... [80G [74G[ OK ]
  524. Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
  525. Cloud-init v. 0.7.5 running 'modules:config' at Mon, 03 Apr 2017 12:39:22 +0000. Up 276.71 seconds.
  526. * Starting AppArmor profiles Generating locales...
  527. [80G [74G[ OK ]
  528. en_US.UTF-8... * Starting iSCSI initiator service iscsid [80G up-to-date
  529. [74G[ OK ]
  530. Generation complete.
  531.  
  532. iscsiadm: No records found
  533. * Setting up iSCSI targets [80G [74G[ OK ]
  534. * Mounting network filesystems [80G [74G[ OK ]
  535. * Stopping System V initialisation compatibility[74G[ OK ]
  536. * Starting System V runlevel compatibility[74G[ OK ]
  537. * Starting save kernel messages[74G[ OK ]
  538. * Starting Pollinate to seed the pseudo random number generator[74G[ OK ]
  539. * Starting ACPI daemon[74G[ OK ]
  540. * Starting regular background program processing daemon[74G[ OK ]
  541. * Starting deferred execution scheduler[74G[ OK ]
  542. * Starting OpenSSH server[74G[ OK ]
  543. * Starting CPU interrupts balancing daemon[74G[ OK ]
  544. * Stopping Pollinate to seed the pseudo random number generator[74G[ OK ]
  545. * Stopping save kernel messages[74G[ OK ]
  546. * Starting automatic crash report generation[74G[ OK ]
  547. open-vm-tools: not starting as this is not a VMware VM
  548. landscape-client is not configured, please run landscape-config.
  549. * Stopping Handle applying cloud-config[74G[ OK ]
  550. * Restoring resolver state... [80G [74G[ OK ]
  551. * Stopping System V runlevel compatibility[74G[ OK ]
  552. * Starting execute cloud user/final scripts[74G[ OK ]
  553.  
  554. Ubuntu 14.04.5 LTS testtrove ttyS0
  555.  
  556. testtrove login: Cloud-init v. 0.7.5 running 'modules:final' at Mon, 03 Apr 2017 12:40:57 +0000. Up 371.94 seconds.
  557. ci-info: no authorized ssh keys fingerprints found for user ubuntu.
  558. ci-info: no authorized ssh keys fingerprints found for user ubuntu.
  559. ec2:
  560. ec2: #############################################################
  561. ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
  562. ec2: 1024 b7:bb:28:fa:b0:15:18:8f:98:87:05:b7:59:0d:ad:b9 root@testtrove (DSA)
  563. ec2: 256 b7:2c:8b:55:d0:96:2d:54:c7:39:c9:1a:27:c9:5c:cd root@testtrove (ECDSA)
  564. ec2: 256 de:db:32:fb:80:a9:f1:40:cf:6b:c0:c4:20:9f:35:45 root@testtrove (ED25519)
  565. ec2: 2048 62:e1:14:19:c3:64:d8:1c:3b:ce:62:04:e1:9f:d8:44 root@testtrove (RSA)
  566. ec2: -----END SSH HOST KEY FINGERPRINTS-----
  567. ec2: #############################################################
  568. -----BEGIN SSH HOST KEY KEYS-----
  569. ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBEh9wC6N8fwQ5RhlXlGc6+FS7vaOhDrO4hWQDlWvPMrtAUIElIwCSUMLW1FjlpMwoE12OQHZ4ixXnW6WZuHigew= root@testtrove
  570. ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJx6k9FWre2/9jkIV6upoqeZX2ZLAMfkicCcza+yck+B root@testtrove
  571. ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC0daPfNH+8f4k6lnEcE6IqqMxBoaQ9oRJQxjKCZza70Bh3/aYFMsxzTfxE7Y/dRVMsH2Z0Nln5v+vLjm7JB6qEvFkyBHNrOCRtbmlqx2x4D5ogu02osldnzYTtY8IzfOVzVFuRvhAbPJJ68TdTUIqDDGAcgC9zFd/Z6jsHQmh7EZxNYGQ2umMeKjDWDWhEIv1MdmXYmGUaRwnQh+6sXpoUsX0e2e8GWmOP4lZ/SoWgb++Hk7ixkXxSaUVIm58YKC3GOjSBb4pwq4PdvxcinUzgn9oUtilgq+FMQZczgh7vDzEJgc4B/mPHx3OErdfeLepQj7VSN16y2a+73kmkBpot root@testtrove
  572. -----END SSH HOST KEY KEYS-----
  573. Cloud-init v. 0.7.5 finished at Mon, 03 Apr 2017 12:41:01 +0000. Datasource DataSourceEc2. Up 376.27 seconds
Add Comment
Please, Sign In to add comment