API tools faq
paste
Advertisement
Guest User

FETA40i newboot

a guest
Feb 4th, 2021
97
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.77 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. [ 0.35]HELLO! BOOT0 is starting!
  3. [ 0.39]boot0 commit : 74581757d98a20b111500764817c436cdafbdae3
  4.  
  5. [ 0.46]boot0 version : 4.0
  6. [ 0.50]set pll start
  7. [ 0.54]set pll end
  8. [ 0.89]rtc[0] value = 0x00000000
  9. [ 0.92]rtc[1] value = 0x00000000
  10. [ 0.95]rtc[2] value = 0x00000000
  11. [ 0.98]rtc[3] value = 0x00000000
  12. [ 0.102]rtc[4] value = 0x00000000
  13. [ 0.105]rtc[5] value = 0x00000000
  14. [ 0.108]DRAMC IS FOUR
  15. [ 0.111]DRAM BOOT DRIVE INFO: V1.1
  16. [ 0.114]Found A40
  17. [ 0.116]Found A40
  18. [ 0.118]Found A40
  19. [ 0.120]Found A40
  20. [ 0.122]Found A40
  21. [ 0.128]PMU: [ 0.129]AXP221
  22. [ 0.131]ddr voltage = 1250 mv
  23. [ 0.138]PMU: [ 0.139]AXP221
  24. [ 0.141]ddr voltage = 1250 mv
  25. [ 0.152]PMU: [ 0.153]AXP221
  26. [ 0.155]ddr voltage = 1500 mv
  27. [ 0.165]DRAM CLK =576 MHZ
  28. [ 0.168]DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  29. [ 0.173]DRAM zq value: 0x003b3bfb
  30. [ 0.179]DRAM SIZE =1024 M
  31. [ 0.182]DRAM simple test OK.
  32. [ 0.185]dram size =1024
  33. [ 0.187]rtc standby flag is 0x00000000, super standby flag is 0x00000000
  34. [ 0.195]card no is 0
  35. [ 0.197]sdcard 0 line count 4
  36. [ 0.200][mmc]: mmc driver ver 2016-07-01 15:30
  37. [ 0.205][mmc]: sdc0 spd mode error, 2
  38. [ 0.218][mmc]: Wrong media type 0x00000000
  39. [ 0.222][mmc]: ***Try SD card 0***
  40. [ 0.232][mmc]: HSSDR52/SDR25 4 bit
  41. [ 0.235][mmc]: 50000000 Hz
  42. [ 0.238][mmc]: 29819 MB
  43. [ 0.241][mmc]: ***SD/MMC 0 init OK!!!***
  44. [ 0.335]Succeed in loading uboot from sdmmc flash.
  45. [ 0.340]Entry_name = u-boot
  46. [ 0.356]Ready to disable icache.
  47. [ 0.359]Jump to secend Boot.
  48.  
  49.  
  50. U-Boot 2014.07 (Aug 20 2020 - 08:55:34) Allwinner Technology
  51.  
  52. uboot commit : 5d16dec294d9b2b99e69dce9986af0e49351a686
  53.  
  54. i2c_init: by cpux
  55. i2c_init ok
  56. [ 0.374]pmbus: ready
  57. [ 0.388]PMU: AXP221
  58. [ 0.388]PMU: AXP22x found
  59. [ 0.389]PMU: dcdc2 1160
  60. [ 0.391]PMU: cpux 1008 Mhz,AXI=336 Mhz
  61. PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz
  62. set power on vol to default
  63. dcdc1_vol = 3300, onoff=1
  64. dcdc2_vol = 1160, onoff=1
  65. dcdc3_vol = 1200, onoff=1
  66. dcdc4_vol = 1100, onoff=0
  67. aldo1_vol = 3300, onoff=1
  68. aldo2_vol = 1800, onoff=1
  69. aldo3_vol = 3000, onoff=1
  70. dc1sw_vol = 3000, onoff=0
  71. dc5ldo_vol = 1100, onoff=0
  72. dldo1_vol = 3300, onoff=1
  73. dldo2_vol = 3300, onoff=0
  74. dldo3_vol = 3300, onoff=0
  75. dldo4_vol = 2500, onoff=1
  76. eldo1_vol = 2800, onoff=0
  77. eldo2_vol = 1200, onoff=1
  78. eldo3_vol = 2800, onoff=1
  79. gpio0_vol = 3300, onoff=1
  80. gpio1_vol = 3300, onoff=1
  81. find power_sply to end
  82. vbus exist
  83. DRAM: 1 GiB
  84. fdt addr: 0x76e91c58
  85. Relocation Offset is: 35ee8000
  86. In: serial
  87. Out: serial
  88. Err: serial
  89. gic: normal mode
  90. [ 0.519]start
  91. drv_disp_init
  92. init_clocks: finish init_clocks.
  93. pwm_request: reg = 0x1c23400. pwm = 0.
  94. request pwm success, pwm = 0.
  95. drv_disp_init finish
  96. fetch script data boot_disp.output_disp fail
  97. fetch script data boot_disp.output_type fail
  98. fetch script data boot_disp.output_mode fail
  99. fetch script data boot_disp.auto_hpd fail
  100. disp0 device type(1) enable
  101. disp 0, clk: pll(306000000),clk(306000000),dclk(51000000) dsi_rate(306000000)
  102. clk real:pll(297000000),clk(297000000),dclk(49500000) dsi_rate(0)
  103. enable power vcc-lcd, ret=0
  104. [ 1.223]end
  105. workmode = 17,storage type = 1
  106. [ 1.223]NAND_UbootProbe start
  107. [ 1.225]NB1 : enter phy init
  108. [ 1.228]nand_physic_init
  109. [ 1.345]Reset NDFC start 0 0
  110. [ 1.345]Reset NDFC end 0 0
  111. [ 1.345]nand not support! channel 0 chip 0: fe fe fe fe fe fe fe fe
  112. [ 1.352]nand not support! channel 0 chip 1: fe fe fe fe fe fe fe fe
  113. [ 1.358]nand not support! channel 0 chip 2: fe fe fe fe fe fe fe fe
  114. [ 1.365]nand not support! channel 0 chip 3: fe fe fe fe fe fe fe fe
  115. [ 1.371] no nand found !
  116. [ 1.374]nand_physic_init nand_build_nsi error
  117. [ 1.421]nand_physic_init error -1
  118. [ 1.421]NB1 : nand phy init fail
  119. [ 1.422]NB1 : enter phy Exit
  120. [ 1.425]nand_physic_exit
  121. [ 1.428]NAND_UbootProbe end: 0xffffffff
  122. try nand fail
  123. try nand fail
  124. try card 2
  125. [mmc]: mmc driver ver 2016-07-01 15:50:00
  126. sd card boot
  127. [mmc]: mmc_update_timing_para: error sdc_no 2
  128. SUNXI SD/MMC: 2
  129. [mmc]: 50 MHz...
  130. [mmc]: sample: 59 - 169(ps)
  131. [mmc]: ds: 59 - 169(ps)
  132. [mmc]: 100 MHz...
  133. [mmc]: sample: 30 - 166(ps)
  134. [mmc]: ds: 31 - 161(ps)
  135. [mmc]: 200 MHz...
  136. [mmc]: sample: 15 - 166(ps)
  137. [mmc]: ds: 16 - 156(ps)
  138. [mmc]: ************Try SD card 2************
  139. [mmc]: mmc 2 cmd 8 timeout, err 100
  140. [mmc]: smc 2 err, cmd 8, RTO
  141. [mmc]: mmc 2 close bus gating and reset
  142. [mmc]: mmc 2 mmc cmd 8 err 0x00000100
  143. [mmc]: mmc send if cond failed
  144. [mmc]: mmc 2 cmd 55 timeout, err 100
  145. [mmc]: smc 2 err, cmd 55, RTO
  146. [mmc]: mmc 2 close bus gating and reset
  147. [mmc]: mmc 2 mmc cmd 55 err 0x00000100
  148. [mmc]: send app cmd failed
  149. [mmc]: ************Try MMC card 2************
  150. [mmc]: host caps: 0x6f
  151. [mmc]: MID 000013 PSN 10312868
  152. [mmc]: PNM Q2J55L -- 0x51-32-4a-35-35
  153. [mmc]: PRV 1.0
  154. [mmc]: MDT m-3 y-2020
  155. [mmc]: MMC v5.0
  156. [mmc]: speed mode : HSSDR52/SDR25
  157. [mmc]: clock : 50000000 Hz
  158. [mmc]: bus_width : 8 bit
  159. [mmc]: user capacity : 7264 MB
  160. [mmc]: boot capacity : 16384 KB
  161. [mmc]: rpmb capacity : 4096 KB
  162. [mmc]: ************SD/MMC 2 init OK!!!************
  163. [mmc]: use default speed mode: 1-HSSDR52/SDR25, ifreq: 2
  164. [mmc]: ========best spd md: 1-HSSDR52/SDR25, freq: 2-50000000
  165. [mmc]: already at HSSDR52_SDR25 mode
  166. [mmc]: erase_grp_size : 0x400WrBlk*0x200=0x80000 Byte
  167. [mmc]: secure_feature : 0x55
  168. [mmc]: secure_removal_type : 0x1
  169. [mmc]: EOL Info(Rev blks): Normal
  170. [mmc]: Wear out(type A): 0%-10% life time used
  171. [mmc]: Wear out(type B): 0%-10% life time used
  172. [mmc]: mmc driver ver 2016-07-01 15:50:00
  173. sd card boot
  174. [mmc]: boot_card_no error 2
  175. SUNXI SD/MMC: 2, SUNXI SD/MMC: 0
  176. [mmc]: 50 MHz...
  177. [mmc]: sample: 60 - 166(ps)
  178. [mmc]: 100 MHz...
  179. [mmc]: sample: 30 - 166(ps)
  180. [mmc]: 200 MHz...
  181. [mmc]: sample: 15 - 166(ps)
  182. [mmc]: ************Try SD card 0************
  183. [mmc]: host caps: 0x27
  184. [mmc]: MID 1b PSN 14a01935
  185. [mmc]: PNM SDU1 -- 0x53-44-55-31-20
  186. [mmc]: PRV 1.0
  187. [mmc]: MDT m-12 y-2019
  188. [mmc]: speed mode : HSSDR52/SDR25
  189. [mmc]: clock : 50000000 Hz
  190. [mmc]: bus_width : 4 bit
  191. [mmc]: user capacity : 29819 MB
  192. [mmc]: ************SD/MMC 0 init OK!!!************
  193. [mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte
  194. [mmc]: secure_feature : 0x0
  195. [mmc]: secure_removal_type : 0x0
  196. mmc init ok
  197. out of usb burn from boot: not boot mode
  198. [ 1.866]inter uboot shell
  199. work mode=0x11
  200. run card sprite
  201. try sprite_led_gpio config
  202. [ 1.869]sunxi sprite begin
  203. fetch script data boot_disp.output_full fail
  204. screen_id =0, screen_width =1024, screen_height =600
  205. frame buffer address 77f326e0
  206. board_display_show_until_lcd_open
  207. screen_width = 1024
  208. screen_height = 600
  209. bar x1: 256 y1: 260
  210. bar x2: 768 y2: 340
  211. reading font32.sft
  212. FAT: Misaligned buffer address (7818a808)
  213. 357443 bytes read in 160 ms (2.1 MiB/s)
  214. [SFTE_Set_Pixel_Sizes_i] 407 buf_size is 2304
  215. cur_pixel_size 32 pixel_size 32
  216. [ 2.098]firmware probe ok
  217. [ 2.099]fetch download map
  218. *************DOWNLOAD MAP DUMP************
  219. total download part 5
  220.  
  221. download part[0] name :boot-resource
  222. download part[0] download file :BOOT-RESOURCE_FE
  223. download part[0] verify file :VBOOT-RESOURCE_F
  224. download part[0] lenlo :0x7000
  225. download part[0] addrlo :0x8000
  226. download part[0] encrypt :0x0
  227. download part[0] verify :0x1
  228.  
  229. download part[1] name :env
  230. download part[1] download file :ENV_FEX000000000
  231. download part[1] verify file :VENV_FEX00000000
  232. download part[1] lenlo :0x2000
  233. download part[1] addrlo :0xf000
  234. download part[1] encrypt :0x0
  235. download part[1] verify :0x1
  236.  
  237. download part[2] name :boot
  238. download part[2] download file :BOOT_FEX00000000
  239. download part[2] verify file :VBOOT_FEX0000000
  240. download part[2] lenlo :0x8000
  241. download part[2] addrlo :0x11000
  242. download part[2] encrypt :0x0
  243. download part[2] verify :0x1
  244.  
  245. download part[3] name :rootfs
  246. download part[3] download file :ROOTFS_FEX000000
  247. download part[3] verify file :VROOTFS_FEX00000
  248. download part[3] lenlo :0x3c3500
  249. download part[3] addrlo :0x19000
  250. download part[3] encrypt :0x0
  251. download part[3] verify :0x1
  252.  
  253. download part[4] name :usr
  254. download part[4] download file :USR-RESOURCE_FEX
  255. download part[4] verify file :VUSR-RESOURCE_FE
  256. download part[4] lenlo :0xbf2000
  257. download part[4] addrlo :0x3e4500
  258. download part[4] encrypt :0x0
  259. download part[4] verify :0x1
  260.  
  261. [ 2.236]fetch mbr
  262. the 0 mbr table is ok
  263. the 1 mbr table is ok
  264. the 2 mbr table is ok
  265. the 3 mbr table is ok
  266. *************MBR DUMP***************
  267. total mbr part 7
  268.  
  269. part[0] name :boot-resource
  270. part[0] classname :DISK
  271. part[0] addrlo :0x8000
  272. part[0] lenlo :0x7000
  273. part[0] user_type :32768
  274. part[0] keydata :0
  275. part[0] ro :0
  276.  
  277. part[1] name :env
  278. part[1] classname :DISK
  279. part[1] addrlo :0xf000
  280. part[1] lenlo :0x2000
  281. part[1] user_type :32768
  282. part[1] keydata :0
  283. part[1] ro :0
  284.  
  285. part[2] name :boot
  286. part[2] classname :DISK
  287. part[2] addrlo :0x11000
  288. part[2] lenlo :0x8000
  289. part[2] user_type :32768
  290. part[2] keydata :0
  291. part[2] ro :0
  292.  
  293. part[3] name :rootfs
  294. part[3] classname :DISK
  295. part[3] addrlo :0x19000
  296. part[3] lenlo :0x3c3500
  297. part[3] user_type :32768
  298. part[3] keydata :0
  299. part[3] ro :0
  300.  
  301. part[4] name :private
  302. part[4] classname :DISK
  303. part[4] addrlo :0x3dc500
  304. part[4] lenlo :0x8000
  305. part[4] user_type :32768
  306. part[4] keydata :0
  307. part[4] ro :0
  308.  
  309. part[5] name :usr
  310. part[5] classname :DISK
  311. part[5] addrlo :0x3e4500
  312. part[5] lenlo :0xbf2000
  313. part[5] user_type :32768
  314. part[5] keydata :0
  315. part[5] ro :0
  316.  
  317. part[6] name :UDISK
  318. part[6] classname :DISK
  319. part[6] addrlo :0xfd6500
  320. part[6] lenlo :0x0
  321. part[6] user_type :0
  322. part[6] keydata :0
  323. part[6] ro :0
  324.  
  325. *************MBR DUMP***************
  326. total mbr part 7
  327.  
  328. part[0] name :boot-resource
  329. part[0] classname :DISK
  330. part[0] addrlo :0x8000
  331. part[0] lenlo :0x7000
  332. part[0] user_type :0x8000
  333. part[0] keydata :0x0
  334. part[0] ro :0x0
  335.  
  336. part[1] name :env
  337. part[1] classname :DISK
  338. part[1] addrlo :0xf000
  339. part[1] lenlo :0x2000
  340. part[1] user_type :0x8000
  341. part[1] keydata :0x0
  342. part[1] ro :0x0
  343.  
  344. part[2] name :boot
  345. part[2] classname :DISK
  346. part[2] addrlo :0x11000
  347. part[2] lenlo :0x8000
  348. part[2] user_type :0x8000
  349. part[2] keydata :0x0
  350. part[2] ro :0x0
  351.  
  352. part[3] name :rootfs
  353. part[3] classname :DISK
  354. part[3] addrlo :0x19000
  355. part[3] lenlo :0x3c3500
  356. part[3] user_type :0x8000
  357. part[3] keydata :0x0
  358. part[3] ro :0x0
  359.  
  360. part[4] name :private
  361. part[4] classname :DISK
  362. part[4] addrlo :0x3dc500
  363. part[4] lenlo :0x8000
  364. part[4] user_type :0x8000
  365. part[4] keydata :0x0
  366. part[4] ro :0x0
  367.  
  368. part[5] name :usr
  369. part[5] classname :DISK
  370. part[5] addrlo :0x3e4500
  371. part[5] lenlo :0xbf2000
  372. part[5] user_type :0x8000
  373. part[5] keydata :0x0
  374. part[5] ro :0x0
  375.  
  376. part[6] name :UDISK
  377. part[6] classname :DISK
  378. part[6] addrlo :0xfd6500
  379. part[6] lenlo :0x0
  380. part[6] user_type :0x0
  381. part[6] keydata :0x0
  382. part[6] ro :0x0
  383.  
  384. [ 2.476]begin to erase flash
  385. total part: 8
  386. mbr 0, 8000, 8000
  387. boot-resource 1, 7000, 8000
  388. env 2, 2000, 8000
  389. boot 3, 8000, 8000
  390. rootfs 4, 3c3500, 8000
  391. private 5, 8000, 8000
  392. usr 6, bf2000, 8000
  393. UDISK 7, 0, 0
  394. not need erase flash
  395. private part exist
  396. the 0 mbr table is ok
  397. the 1 mbr table is ok
  398. the 2 mbr table is ok
  399. the 3 mbr table is ok
  400. *************MBR DUMP***************
  401. total mbr part 7
  402.  
  403. part[0] name :boot-resource
  404. part[0] classname :DISK
  405. part[0] addrlo :0x8000
  406. part[0] lenlo :0x3800
  407. part[0] user_type :32768
  408. part[0] keydata :0
  409. part[0] ro :0
  410.  
  411. part[1] name :env
  412. part[1] classname :DISK
  413. part[1] addrlo :0xb800
  414. part[1] lenlo :0x2000
  415. part[1] user_type :32768
  416. part[1] keydata :0
  417. part[1] ro :0
  418.  
  419. part[2] name :boot
  420. part[2] classname :DISK
  421. part[2] addrlo :0xd800
  422. part[2] lenlo :0x8000
  423. part[2] user_type :32768
  424. part[2] keydata :0
  425. part[2] ro :0
  426.  
  427. part[3] name :rootfs
  428. part[3] classname :DISK
  429. part[3] addrlo :0x15800
  430. part[3] lenlo :0x200000
  431. part[3] user_type :32768
  432. part[3] keydata :0
  433. part[3] ro :0
  434.  
  435. part[4] name :private
  436. part[4] classname :DISK
  437. part[4] addrlo :0x215800
  438. part[4] lenlo :0x8000
  439. part[4] user_type :32768
  440. part[4] keydata :0
  441. part[4] ro :0
  442.  
  443. part[5] name :usr
  444. part[5] classname :DISK
  445. part[5] addrlo :0x21d800
  446. part[5] lenlo :0xcf5800
  447. part[5] user_type :32768
  448. part[5] keydata :0
  449. part[5] ro :0
  450.  
  451. part[6] name :UDISK
  452. part[6] classname :DISK
  453. part[6] addrlo :0xf13000
  454. part[6] lenlo :0x0
  455. part[6] user_type :0
  456. part[6] keydata :0
  457. part[6] ro :0
  458.  
  459. begin to store data
  460. part name boot-resource
  461. keydata = 0x0
  462. part name env
  463. keydata = 0x0
  464. part name boot
  465. keydata = 0x0
  466. part name rootfs
  467. keydata = 0x0
  468. part name private
  469. keydata = 0x0
  470. find keypart private
  471. keypart read start: 0x215800, sectors 0x8000
  472. keypart part private read end: 0x215800, sectors 0x8000
  473. part name usr
  474. keydata = 0x0
  475. part name UDISK
  476. keydata = 0x0
  477. need_erase_flag = 0
  478. begin to erase
  479. finish erase
  480. rewrite
  481. keypart write start: 0x3dc500, sectors 0x8000
  482. keypart write end: 0x3dc500, sectors 0x8000
  483. flash exit
  484. [ 3.676]successed in erasing flash
  485. unable to get ext_phy_part:burn_flag info
  486. [ 3.683]successed in deal extend physical partition
  487. begin to write standard mbr
  488. successed to write standard mbr
  489. [ 3.694]begin to download part
  490. [ 3.694]begin to download part boot-resource
  491. partdata hi 0x0
  492. partdata lo 0x537400
  493. sparse: bad magic
  494. [ 4.077]successed in writting part boot-resource
  495. origin_verify value = bb0c4d4b, active_verify value = bb0c4d4b
  496. [ 4.210]successed in verify part boot-resource
  497. [ 4.214]successed in download part boot-resource
  498. [ 4.219]begin to download part env
  499. partdata hi 0x0
  500. partdata lo 0x20000
  501. sparse: bad magic
  502. [ 4.237]successed in writting part env
  503. origin_verify value = 862a5fc6, active_verify value = 862a5fc6
  504. [ 4.246]successed in verify part env
  505. [ 4.249]successed in download part env
  506. [ 4.253]begin to download part boot
  507. partdata hi 0x0
  508. partdata lo 0xcbf000
  509. sparse: bad magic
  510. [ 5.161]successed in writting part boot
  511. origin_verify value = 3a1d9403, active_verify value = 3a1d9403
  512. [ 5.476]successed in verify part boot
  513. [ 5.480]successed in download part boot
  514. [ 5.483]begin to download part rootfs
  515. partdata hi 0x0
  516. partdata lo 0x2329a000
  517. sparse: bad magic
  518. [ 44.804]successed in writting part rootfs
  519. origin_verify value = 585a4a3c, active_verify value = 585a4a3c
  520. [ 58.444]successed in verify part rootfs
  521. [ 58.448]successed in download part rootfs
  522. [ 58.453]begin to download part usr
  523. partdata hi 0x0
  524. partdata lo 0x501600
  525. sparse: bad magic
  526. [ 58.819]successed in writting part usr
  527. origin_verify value = fa562d1a, active_verify value = fa562d1a
  528. [ 58.947]successed in verify part usr
  529. [ 58.950]successed in download part usr
  530. [ 58.959]successed in downloading part
  531. uboot_pkg magic 0x89119800
  532. uboot size = 0x108000
  533. storage type = 2
  534. mmc down uboot
  535. sunxi_sprite_deal_uboot ok
  536. [ 59.059]successed in downloading uboot
  537. [mmc]: write mmc info ok
  538. dram para[0] = 240
  539. dram para[1] = 3
  540. dram para[2] = 3b3bfb
  541. dram para[3] = 31
  542. dram para[4] = 10e410e4
  543. dram para[5] = 4001000
  544. dram para[6] = 1c70
  545. dram para[7] = 40
  546. dram para[8] = 18
  547. dram para[9] = 0
  548. dram para[10] = 479950
  549. dram para[11] = 1b1a94b
  550. dram para[12] = 65046
  551. dram para[13] = b47d7d96
  552. dram para[14] = 0
  553. dram para[15] = 198
  554. dram para[16] = 21000000
  555. dram para[17] = 2406c1e0
  556. dram para[18] = 0
  557. dram para[19] = 0
  558. dram para[20] = 3
  559. dram para[21] = 33330000
  560. dram para[22] = 7777
  561. dram para[23] = c4096953
  562. dram para[24] = 0
  563. dram para[25] = 0
  564. dram para[26] = 0
  565. dram para[27] = 0
  566. dram para[28] = 0
  567. dram para[29] = 0
  568. dram para[30] = 0
  569. dram para[31] = 0
  570. storage type = 2
  571. card2 download boot0
  572. [ 59.139]successed in downloading boot0
  573. current bitmap buffer size is 0 and new bitmap size is 483.
  574. pitch abs is 21 and glyph rows is 23.
  575. current bitmap buffer size is 483 and new bitmap size is 529.
  576. pitch abs is 23 and glyph rows is 23.
  577. [ 59.155]sprite success
  578. next work 3
  579. SUNXI_UPDATE_NEXT_ACTION_SHUTDOWN
  580. set next system normal
  581. drv_disp_exit
  582. [mmc]: mmc exit start
  583. [mmc]: 50 MHz...
  584. [mmc]: sample: 60 - 166(ps)
  585. [mmc]: ds: 60 - 166(ps)
  586. [mmc]: 100 MHz...
  587. [mmc]: sample: 31 - 161(ps)
  588. [mmc]: ds: 30 - 166(ps)
  589. [mmc]: 200 MHz...
  590. [mmc]: sample: 15 - 166(ps)
  591. [mmc]: ds: 15 - 166(ps)
  592. [mmc]: mmc 2 exit HELLO! BOOT0 is starting!
  593. [ 0.35]HELLO! BOOT0 is starting!
  594. [ 0.39]boot0 commit : 74581757d98a20b111500764817c436cdafbdae3
  595.  
  596. [ 0.46]boot0 version : 4.0
  597. [ 0.50]set pll start
  598. [ 0.54]set pll end
  599. [ 0.89]rtc[0] value = 0x00000000
  600. [ 0.92]rtc[1] value = 0x00000000
  601. [ 0.95]rtc[2] value = 0x00000000
  602. [ 0.98]rtc[3] value = 0x00000000
  603. [ 0.102]rtc[4] value = 0x00000000
  604. [ 0.105]rtc[5] value = 0x00000000
  605. [ 0.108]DRAMC IS FOUR
  606. [ 0.111]DRAM BOOT DRIVE INFO: V1.1
  607. [ 0.114]Found A40
  608. [ 0.116]Found A40
  609. [ 0.118]Found A40
  610. [ 0.120]Found A40
  611. [ 0.122]Found A40
  612. [ 0.128]PMU: [ 0.129]AXP221
  613. [ 0.131]ddr voltage = 1500 mv
  614. [ 0.134]DRAM CLK =576 MHZ
  615. [ 0.137]DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  616. [ 0.142]DRAM zq value: 0x003b3bfb
  617. [ 0.148]DRAM SIZE =1024 M
  618. [ 0.150]DRAM simple test OK.
  619. [ 0.153]dram size =1024
  620. [ 0.156]rtc standby flag is 0x00000000, super standby flag is 0x00000000
  621. [ 0.164]card no is 2
  622. [ 0.166]sdcard 2 line count 8
  623. [ 0.169][mmc]: mmc driver ver 2016-07-01 15:30
  624. [ 0.173][mmc]: wrong freq 2 at spd md 2
  625. [ 0.186][mmc]: ***Try MMC card 2***
  626. [ 0.202][mmc]: MMC 5.0
  627. [ 0.204][mmc]: HSSDR52/SDR25 8 bit
  628. [ 0.208][mmc]: 50000000 Hz
  629. [ 0.211][mmc]: 7264 MB
  630. [ 0.213][mmc]: ***SD/MMC 2 init OK!!!***
  631. [ 0.286]Succeed in loading uboot from sdmmc flash.
  632. [ 0.291]Entry_name = u-boot
  633. [ 0.306]Ready to disable icache.
  634. [ 0.310]0xffffffff 0xffffffff
  635. [ 0.313]0xffffffff 0xffffffff
  636. [ 0.316]0xffffffff 0xffffffff
  637. [ 0.319]0xffffffff 0xffffffff
  638. [ 0.322]0xffffffff 0xffffffff
  639. [ 0.325]0xffffffff 0xffffffff
  640. [ 0.328]Jump to secend Boot.
  641.  
  642.  
  643. U-Boot 2014.07 (Aug 20 2020 - 08:55:34) Allwinner Technology
  644.  
  645. uboot commit : 5d16dec294d9b2b99e69dce9986af0e49351a686
  646.  
  647. i2c_init: by cpux
  648. i2c_init ok
  649. [ 0.343]pmbus: ready
  650. [ 0.357]PMU: AXP221
  651. [ 0.357]PMU: AXP22x found
  652. [ 0.358]PMU: dcdc2 1160
  653. [ 0.360]PMU: cpux 1008 Mhz,AXI=336 Mhz
  654. PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz
  655. set power on vol to default
  656. dcdc1_vol = 3300, onoff=1
  657. dcdc2_vol = 1160, onoff=1
  658. dcdc3_vol = 1200, onoff=1
  659. dcdc4_vol = 1100, onoff=0
  660. aldo1_vol = 3300, onoff=1
  661. aldo2_vol = 1800, onoff=1
  662. aldo3_vol = 3000, onoff=1
  663. dc1sw_vol = 3000, onoff=0
  664. dc5ldo_vol = 1100, onoff=0
  665. dldo1_vol = 3300, onoff=1
  666. dldo2_vol = 3300, onoff=0
  667. dldo3_vol = 3300, onoff=0
  668. dldo4_vol = 2500, onoff=1
  669. eldo1_vol = 2800, onoff=0
  670. eldo2_vol = 1200, onoff=1
  671. eldo3_vol = 2800, onoff=1
  672. gpio0_vol = 3300, onoff=1
  673. gpio1_vol = 3300, onoff=1
  674. find power_sply to end
  675. vbus exist
  676. run key detect
  677. no key found
  678. no uart input
  679. DRAM: 1 GiB
  680. fdt addr: 0x76e91c58
  681. Relocation Offset is: 35ee8000
  682. In: serial
  683. Out: serial
  684. Err: serial
  685. gic: normal mode
  686. [ 0.510]start
  687. drv_disp_init
  688. init_clocks: finish init_clocks.
  689. pwm_request: reg = 0x1c23400. pwm = 0.
  690. request pwm success, pwm = 0.
  691. drv_disp_init finish
  692. fetch script data boot_disp.output_disp fail
  693. fetch script data boot_disp.output_type fail
  694. fetch script data boot_disp.output_mode fail
  695. fetch script data boot_disp.auto_hpd fail
  696. disp0 device type(1) enable
  697. disp 0, clk: pll(306000000),clk(306000000),dclk(51000000) dsi_rate(306000000)
  698. clk real:pll(297000000),clk(297000000),dclk(49500000) dsi_rate(0)
  699. enable power vcc-lcd, ret=0
  700. [ 1.214]end
  701. workmode = 0,storage type = 2
  702. [ 1.214]MMC: 2
  703. [mmc]: mmc driver ver 2016-07-01 15:50:00
  704. Read addr=40 eeprom addrlen=1 ok!!
  705.  
  706. The test ok!
  707. secret ok
  708. [mmc]: mmc_update_timing_para: error sdc_no 2
  709. SUNXI SD/MMC: 2
  710. [mmc]: 50 MHz...
  711. [mmc]: sample: 62 - 161(ps)
  712. [mmc]: ds: 63 - 158(ps)
  713. [mmc]: 100 MHz...
  714. [mmc]: sample: 31 - 161(ps)
  715. [mmc]: ds: 31 - 161(ps)
  716. [mmc]: 200 MHz...
  717. [mmc]: sample: 16 - 156(ps)
  718. [mmc]: ds: 15 - 166(ps)
  719. [mmc]: media type 0x8000000
  720. [mmc]: ************Try MMC card 2************
  721. [mmc]: host caps: 0x6f
  722. [mmc]: MID 000013 PSN 10312868
  723. [mmc]: PNM Q2J55L -- 0x51-32-4a-35-35
  724. [mmc]: PRV 1.0
  725. [mmc]: MDT m-3 y-2020
  726. [mmc]: MMC v5.0
  727. [mmc]: speed mode : HSSDR52/SDR25
  728. [mmc]: clock : 50000000 Hz
  729. [mmc]: bus_width : 8 bit
  730. [mmc]: user capacity : 7264 MB
  731. [mmc]: boot capacity : 16384 KB
  732. [mmc]: rpmb capacity : 4096 KB
  733. [mmc]: ************SD/MMC 2 init OK!!!************
  734. [mmc]: use default speed mode: 1-HSSDR52/SDR25, ifreq: 2
  735. [mmc]: ========best spd md: 1-HSSDR52/SDR25, freq: 2-50000000
  736. [mmc]: already at HSSDR52_SDR25 mode
  737. [mmc]: erase_grp_size : 0x400WrBlk*0x200=0x80000 Byte
  738. [mmc]: secure_feature : 0x55
  739. [mmc]: secure_removal_type : 0x1
  740. [mmc]: EOL Info(Rev blks): Normal
  741. [mmc]: Wear out(type A): 0%-10% life time used
  742. [mmc]: Wear out(type B): 0%-10% life time used
  743. [ 1.464]sunxi flash init ok
  744. sunxi secure storage is not supported
  745. [ 1.471]usb burn from boot
  746. delay time 0
  747. [ 1.563]usb prepare ok
  748. [ 2.362]timer occur
  749. [ 2.363]overtime
  750. [ 2.396]do_burn_from_boot usb : no usb exist
  751. --------fastboot partitions--------
  752. -total partitions:7-
  753. -name- -start- -size-
  754. boot-resource: 1000000 e00000
  755. env : 1e00000 400000
  756. boot : 2200000 1000000
  757. rootfs : 3200000 786a0000
  758. private : 7b8a0000 1000000
  759. usr : 7c8a0000 7e400000
  760. UDISK : faca0000 0
  761. -----------------------------------
  762. base bootcmd=run setargs_nand boot_normal
  763. bootcmd set setargs_mmc
  764. key 0
  765. cant find rcvy value
  766. cant find fstbt value
  767. no misc partition is found
  768. to be run cmd=run setargs_mmc boot_normal
  769. update dtb dram start
  770. update dtb dram end
  771. PowerBus = 3( 2:vBus 3:acBus other: not exist)
  772. no battery, limit to dc
  773. no battery exist
  774. EnterNormalBootMode sunxi_bmp_display--
  775. reading bootlogo.bmp
  776. 1152054 bytes read in 30 ms (36.6 MiB/s)
  777. bmp file buffer: 0x40000000, bmp_info.buffer: 46400000
  778. fetch script data boot_disp.output_full fail
  779. screen_id =0, screen_width =1024, screen_height =600
  780. frame buffer address 46400036
  781. [ 2.660]inter uboot shell
  782. Press SPACE to abort autoboot
  783. read partition: boot or recovery
  784. [ 3.983]sunxi flash read :offset 2200000, 14410229 bytes OK
  785. Android's image name: sun8i_arm
  786. Kernel load addr 0x40008000 size 11696 KiB
  787. RAM disk load addr 0x41000000 size 1353 KiB
  788. read private data
  789. private maybe empty
  790. read private data
  791. private maybe empty
  792. [ 4.055]ready to boot
  793. prepare for kernel
  794. [mmc]: mmc exit start
  795. [mmc]: 50 MHz...
  796. [mmc]: sample: 60 - 166(ps)
  797. [mmc]: ds: 59 - 169(ps)
  798. [mmc]: 100 MHz...
  799. [mmc]: sample: 31 - 161(ps)
  800. [mmc]: ds: 30 - 166(ps)
  801. [mmc]: 200 MHz...
  802. [mmc]: sample: 15 - 166(ps)
  803. [mmc]: ds: 15 - 166(ps)
  804. [mmc]: mmc 2 exit ok
  805.  
  806. Starting kernel ...
  807.  
  808. [ 0.000000] Booting Linux on physical CPU 0x0
  809. [ 0.000000] Initializing cgroup subsys cpuset
  810. [ 0.000000] Initializing cgroup subsys cpu
  811. [ 0.000000] Initializing cgroup subsys cpuacct
  812. [ 0.000000] Linux version 3.10.65 (bluesky@a97aa656d1ab) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #355 SMP PREEMPT Thu Aug 20 09:01:58 UTC 2020
  813. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
  814. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  815. [ 0.000000] Machine: sun8iw11p1, model: sun8iw11p1
  816. [ 0.000000] bootconsole [earlycon0] enabled
  817. [/init]: RootDevice is "/dev/mmcblk0p7"
  818. [/init]: Try to load EMMC ...
  819. e2fsck 1.41.14 (22-Dec-2010)
  820. /dev/mmcblk0p7: clean, 9625/10792 files, 509751/576104 blocks
  821. mount: proc is already mounted or /proc busy
  822. proc is already mounted on /proc
  823. mount: devtmpfs is already mounted or /dev busy
  824. init asteroid env##
  825. Populating /dev/ using udev: done
  826. init qt env########################
  827. ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
  828. Starting sshd: OK
  829. Starting telnetd: OK
  830. Starting vsftpd: OK
  831. ================Usrage================
  832. /fbinit means:clean /dev/fb0
  833. /fbinit 0 means:clean /dev/fb0
  834. /fbinit 1 means:clean /dev/fb1
  835. /fbinit 2 means:clean /dev/fb2
  836. ================usrage================
  837. cleanning /dev/fb0 ...
  838. clean /dev/fb0 finish
  839. Filesystem label=
  840. OS type: Linux
  841. Block size=4096 (log=2)
  842. Fragment size=4096 (log=2)
  843. 336672 inodes, 1344352 blocks
  844. 67217 blocks (5%) reserved for the super user
  845. First data block=0
  846. Maximum filesystem blocks=4194304
  847. 42 block groups
  848. 32768 blocks per group, 32768 fragments per group
  849. 8016 inodes per group
  850. Superblock backups stored on blocks:
  851. 32768, 98304, 163840, 229376, 294912, 819200, 884736
  852. D-Bus per-session daemon address is: unix:abstract=/tmp/dbus-Xc1CNjoKcd,guid=e19cb999d8774549d2dcdb8600000009
  853. Unknown username "pulse" in message bus configuration file
  854. find qt5 installed
  855. Unknown username "pulse" in message bus configuration file
  856. Failed to start message bus: The pid file "/var/run/messagebus.pid" exists, if the message bus is not running, remove this file
  857. xres = 1024, yres = 600
  858. kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
  859. device_chose finished!
  860. start adb...
  861.  
  862. Welcome to Allwinner A40i Linux Platform V1.3
  863. A40i login:
  864.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!