Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [USBD] USB PRB0 LineState: 0
- [USBD] USB cable/ No Cable inserted!
- [PLFM] Keep stay in USB Mode
- Platform initialization is ok
- wait for frequency meter finish, CLK26CALI = 0x81
- mt_pll_post_init: mt_get_cpu_freq = 1040000Khz
- wait for frequency meter finish, CLK26CALI = 0x90
- mt_pll_post_init: mt_get_bus_freq = 273000Khz
- wait for frequency meter finish, CLK26CALI = 0x81
- mt_pll_post_init: mt_get_mem_freq = 133250Khz
- [PWRAP] pwrap_init_preloader
- [PWRAP] pwrap_init
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=0,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=1,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=2,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=3,rdata=800
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=4 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=5 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=6 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=7 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=8 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=9 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=10 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=11,rdata=1001
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=12,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=13,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=14,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=15,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=16,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=17,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=18,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=19,rdata=2003
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=20,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=21,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=22,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=23,rdata=6A97
- [PWRAP] _pwrap_init_reg_clock
- [PMIC_WRAP]wrap_init pass,the return value=0.
- [pmic6323_init] Preloader Start..................
- [pmic6323_init] PMIC CHIP Code = 0x2023
- INT_MISC_CON: 0 TOP_RST_MISC: 0
- pl pmic powerkey Press
- [pmic6323_init] powerKey = 1
- [pmic6323_init] is USB in = 0xB004
- [pmic6323_init] Reg[0x11A]=0x1B
- pmic setup LED
- [pmic6323_init] Done...................
- mt7623 disable long press reset ->>>>>
- mt7623 disable long press reset <<<<<-
- mt7623 VPA supplied by 1.0V to MT7530 ->
- mt7623 VPA supplied by 1.0V to MT7530 <-
- mt7623 enables RG_VGP1_EN for LCM ->
- mt7623 enables RG_VGP1_EN for LCM <-
- MT7623 E2 setting =>
- MT7623 E2 setting <=
- [PLFM] Init I2C: OK(0)
- [PLFM] Init PWRAP: OK(0)
- [PLFM] Init PMIC: OK(0)
- [PLFM] chip[CA00]
- [BLDR] [Support SD/eMMC] Build Time: 20170210-093340
- ==== Dump RGU Reg ========
- RGU MODE: 4D
- RGU LENGTH: FFE0
- RGU STA: 0
- RGU INTERVAL: FFF
- RGU SWSYSRST: 0
- ==== Dump RGU Reg End ====
- RGU: g_rgu_satus:0
- mtk_wdt_mode_config mode value=10, tmp:22000010
- PL P ON
- WDT does not trigger reboot
- RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
- kpd read addr: 0x0040: data:0x4001
- Enter mtk_kpd_gpio_set!
- kpd debug column : 0, 0, 0, 0, 0, 0, 0, 0
- kpd debug row : 0, 0, 0, 0, 0, 0, 0, 0
- after set KP enable: KP_SEL = 0x0 !
- MTK_PMIC_RST_KEY is used for this project!
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=3968
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] bbpu = 0xD, con = 0x8427
- rtc_first_boot_init
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=3968
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] get_frequency_meter: input=0x0, ouput=0
- rtc_2sec_stat_clear
- rtc_2sec_reboot_check cali=256
- rtc_2sec_stat_clear
- [RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0xC0, spar1 = 0x800
- [RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
- [RTC] bbpu = 0xD, con = 0x426, cali = 0x100
- pl pmic powerkey Press
- power key is pressed
- [PLFM] Power key boot!
- [RTC] rtc_bbpu_power_on done
- [EMI] mcp_dram_num:0,discrete_dram_num:1,enable_combo_dis:0
- [EMI] PCDDR3
- [Check]mt_get_mdl_number 0x0
- [EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
- [EMI] MDL number = 0
- [EMI] emi_set eMMC/NAND ID = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
- [EMI][Vcore]0x21E=0x48,0x220=0x48
- [EMI][Vmem]0x554=0x0
- wait for frequency meter finish, CLK26CALI = 0x81
- [EMI] PCDDR3 DRAM Clock = 1333004 KHz, MEMPLL MODE = 2
- [EMI] PCDDR3 RXTDN Calibration:
- Start REXTDN SW calibration...
- drvp=0xB,drvn=0x8
- [EMI] pinmux = 4
- ===============================================================================
- dramc_write_leveling_swcal
- ===============================================================================
- delay byte0 byte1 byte2 byte3
- -----------------------------
- 0 0 0 0 0
- 1 0 0 1 0
- 2 1 0 1 0
- 3 1 0 1 0
- 4 1 0 1 0
- 5 1 0 1 0
- 6 1 0 1 0
- 7 1 0 1 0
- 8 1 0 1 1
- 9 1 0 1 1
- 10 1 0 1 1
- 11 1 0 1 1
- 12 1 1 1 1
- 13 1 1 1 1
- 14 1 1 1 1
- 15 1 1 1 1
- pass bytecount = 4
- byte_i status best delay
- 0 2 2
- 1 2 12
- 2 2 1
- 3 2 8
- ========================================
- [write leveling]DQS: 0x81C2, DQM: 0x81C2
- [write leveling after remap]DQ byte0 reg: 0x200 val: 0x2222CCCC
- [write leveling after remap]DQ byte1 reg: 0x204 val: 0xCCCC2222
- [write leveling after remap]DQ byte2 reg: 0x208 val: 0x11118888
- [write leveling after remap]DQ byte3 reg: 0x20C val: 0x88881111
- =============================================
- X-axis: DQS Gating Window Delay (Fine Scale)
- Y-axis: DQS Gating Window Delay (Coarse Scale)
- =============================================
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0010:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0011:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 0012:| 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0
- 0013:| 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
- 0014:| 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- Rank 0 coarse tune value selection : 18, 18
- 18
- 64
- rank 0 coarse = 18
- rank 0 fine = 64
- 00:| 0 0 0 0 0 0 0 1 1 1 1 0
- opt_dle value:12
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-31 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 0 0 0 0 0 0 0 0 0 0
- 10 | 0 0 0 0 0 0 0 0 0 0
- 20 | 0 0 0 0 0 0 0 0 0 0
- 30 | 0 0
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =52 DQS1 = 44 DQS2 =53 DQS3 = 50
- ==================================================================
- bit DQS0 bit DQS1 bit DQS2 bit DQS3
- 0 (18~78)48 8 (11~71)41 16 (20~79)49 24 (17~73)45
- 1 (17~78)47 9 (9~69)39 17 (19~76)47 25 (15~68)41
- 2 (19~81)50 10 (13~75)44 18 (20~84)52 26 (19~79)49
- 3 (18~74)46 11 (15~74)44 19 (21~78)49 27 (17~72)44
- 4 (21~80)50 12 (15~74)44 20 (23~80)51 28 (23~78)50
- 5 (20~79)49 13 (16~73)44 21 (20~80)50 29 (19~72)45
- 6 (20~78)49 14 (14~71)42 22 (23~80)51 30 (17~71)44
- 7 (21~84)52 15 (16~71)43 23 (24~82)53 31 (19~76)47
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 4 5 2 6 2 3 3 0 3 5
- 10 | 0 0 0 0 2 1 4 6 1 4
- 20 | 2 3 2 0 5 9 1 6 0 5
- 30 | 6 3
- ==================================================================
- *DQIDLY1 = 0x6020504
- *DQIDLY2 = 0x30302
- *DQIDLY3 = 0x503
- *DQIDLY4 = 0x1020000
- *DQIDLY5 = 0x4010604
- *DQIDLY6 = 0x20302
- *DQIDLY7 = 0x6010905
- *DQIDLY8 = 0x3060500
- *DRAMC_R0DELDLY = 0x32352C34
- [MEM]CONA:F3A2,conf1:F07486A3
- DM4BitMux = 1
- DQSO 0 in TX per-bit = 0 <= DQSO 0 in WL = 2
- DQSO 1 in TX per-bit = 0 <= DQSO 1 in WL = 12
- [Warning] DQSO 2 in TX per-bit = 5 > DQSO 2 in WL = 1
- DQSO 3 in TX per-bit = 6 <= DQSO 3 in WL = 8
- Tx DQM dly = 0x31F3
- Tx DQM dly bit4 = 0x0
- DRAMC_DQODLY1=33530F00h
- DRAMC_DQODLY2=1F05345h
- DRAMC_DQODLY3=10425244h
- DRAMC_DQODLY4=44422222h
- Tx DQ dly bit4 = 0xD00B
- Tx DQS dly = 0x85C2
- Tx DQS dly bit4 = 0x0
- TX Byte0: DQ - 22, DQS - 18. win_sum= 39
- TX Byte1: DQ - 24, DQS - 16. win_sum= 39
- TX Byte2: DQ - 17, DQS - 24. win_sum= 40
- TX Byte3: DQ - 16, DQS - 26. win_sum= 41
- DRAMC calibration takes 652624420 CPU cycles
- [EMI] DRAMC calibration passed
- [MEM] complex R/W mem test pass
- 0:dram_rank_size:80000000
- [Dram_Buffer] dram size:-2147483648
- [Dram_Buffer] structure size: 1725560
- [Dram_Buffer] MAX_TEE_DRAM_SIZE: 0
- Boot from SD Card!!
- [PLFM] Init Boot Device: OK(0)
- [PART] blksz: 512B
- [PART] [0x0000000000000000-0x000000000003FFFF] "PRELOADER" (512 blocks)
- [PART] [0x0000000000000000-0x000000000003FFFF] "MBR" (512 blocks)
- [PART] [0x0000000000040000-0x00000000000BFFFF] "UBOOT" (1024 blocks)
- [PART] [0x00000000000C0000-0x00000000000FFFFF] "CONFIG" (512 blocks)
- [PART] [0x0000000000100000-0x000000000013FFFF] "FACTORY" (512 blocks)
- [PART] [0x0000000000140000-0x000000000213FFFF] "BOOTIMG" (65536 blocks)
- [PART] [0x0000000002140000-0x000000000413FFFF] "RECOVERY" (65536 blocks)
- [PART] [0x0000000004140000-0x000000004413FFFF] "ROOTFS" (2097152 blocks)
- [PART] [0x0000000044140000-0x000001FFC413FFFF] "USER" (-4194304 blocks)
- [platform_vusb_on] PASS
- [TOOL] PMIC not dectect usb cable!
- [TOOL] <UART> listen ended, receive size:0!
- [TOOL] <UART> wait sync time 150ms->5ms
- [TOOL] <UART> receieved data: ()
- Device APC domain init setup:
- bootloader load uboot ,the address of uboot is 81E00000
- [PART]partition name UBOOT
- [PART]partition start block 0x200
- [PART]partition size 0x80000
- [PART]partition blks 0x400
- [PART]partition flags 0x0
- [PART]partition name 0x8
- [bean] part->startblk(0x200) bdev->blksz(0x200) part->part_id(8) hdr(0xFFB50000)
- [BlkDev.c 101 ]partition block size 0x200 ,blks:0xECE000
- [BlkDev.c 101 ]partition block erase size 0x200
- [PART] load "UBOOT" from 0x0000000000050000 (dev) to 0x81E00000 (mem) [SUCCESS]
- [PART] load speed: 6103KB/s, 300000 bytes, 48ms
- [BT_SD_PG] device info 0x8590 0x8A00 0xCB01 0x102
- 0:dram_rank_size:80000000
- [PLFM] md_type[0] = 255
- [PLFM] md_type[1] = 255
- [PLFM] boot reason: 0
- [PLFM] boot mode: 0
- [PLFM] META COM0: 0
- [PLFM] <0xFFB7CC10>: 0x0
- [PLFM] boot time: 2945ms
- [PLFM] DDR reserve mode: enable = 0, success = 0
- [BLDR] jump to 0x81E00000
- [BLDR] <0x81E00000>=0xEA00000F
- [BLDR] <0x81E00004>=0xE59FF014
- U-Boot (Mar 09 2017 - 17:12:46)
- ================== Iverson debug. ===========================
- g_nr_bank = 1.
- g_total_rank_size = 0x80000000
- DRAM: 2 GiB
- WARNING: Caches not enabled
- dev_num = 0
- ***size=4096, offset=1536, blk_start=3, blk_cnt=8
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- dev_num = 0
- ***size=4096, offset=1536, blk_start=3, blk_cnt=8
- *** Warning - bad CRC, using default environment
- bootargs = board=bpi-r2 earlyprintk console=tty1 fbcon=map:0 console=ttyS0,115200 vmalloc=496M debug=7 initcall_debug=0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
- Net: Eth0
- Uip activated
- *** U-Boot Boot Menu ***
- 1. System Load Linux to SDRAM via TFTP.
- 2. System Load Linux Kernel then write to Flash via TFTP.
- 3. Boot Linux from SD.
- 4. System Load Boot Loader then write to Flash via TFTP.
- 5. System Load Linux Kernel then write to Flash via Serial.
- 6. System Load Boot Loader then write to Flash via Serial.
- 7. Boot system code via Flash.
- U-Boot console
- Press UP/DOWN to move, ENTER to select
- BPI: SD/eMMC SD=1 eMMC=0 id = 1 (drivers/mmc/mediatek/mtk_mmc.c)
- __mmc_init ret = 0
- ret2 = 1
- ret2 = 1
- BPI: g_mtk_mmc_block.dev = 1
- <= [mmc1 block 0] =>
- [0x00000000] 53 44 4d 4d 43 5f 42 4f
- [0x00000008] 4f 54 00 00 01 00 00 00
- [0x00000010] 00 02 00 00 ff ff ff ff
- [0x00000018] ff ff ff ff ff ff ff ff
- [0x00000020] ff ff ff ff ff ff ff ff
- [0x00000028] ff ff ff ff ff ff ff ff
- [0x00000030] ff ff ff ff ff ff ff ff
- [0x00000038] ff ff ff ff ff ff ff ff
- [0x00000040] ff ff ff ff ff ff ff ff
- [0x00000048] ff ff ff ff ff ff ff ff
- [0x00000050] ff ff ff ff ff ff ff ff
- [0x00000058] ff ff ff ff ff ff ff ff
- [0x00000060] ff ff ff ff ff ff ff ff
- [0x00000068] ff ff ff ff ff ff ff ff
- [0x00000070] ff ff ff ff ff ff ff ff
- [0x00000078] ff ff ff ff ff ff ff ff
- [0x00000080] ff ff ff ff ff ff ff ff
- [0x00000088] ff ff ff ff ff ff ff ff
- [0x00000090] ff ff ff ff ff ff ff ff
- [0x00000098] ff ff ff ff ff ff ff ff
- [0x000000a0] ff ff ff ff ff ff ff ff
- [0x000000a8] ff ff ff ff ff ff ff ff
- [0x000000b0] ff ff ff ff ff ff ff ff
- [0x000000b8] ff ff ff ff ff ff ff ff
- [0x000000c0] ff ff ff ff ff ff ff ff
- [0x000000c8] ff ff ff ff ff ff ff ff
- [0x000000d0] ff ff ff ff ff ff ff ff
- [0x000000d8] ff ff ff ff ff ff ff ff
- [0x000000e0] ff ff ff ff ff ff ff ff
- [0x000000e8] ff ff ff ff ff ff ff ff
- [0x000000f0] ff ff ff ff ff ff ff ff
- [0x000000f8] ff ff ff ff ff ff ff ff
- [0x00000100] ff ff ff ff ff ff ff ff
- [0x00000108] ff ff ff ff ff ff ff ff
- [0x00000110] ff ff ff ff ff ff ff ff
- [0x00000118] ff ff ff ff ff ff ff ff
- [0x00000120] ff ff ff ff ff ff ff ff
- [0x00000128] ff ff ff ff ff ff ff ff
- [0x00000130] ff ff ff ff ff ff ff ff
- [0x00000138] ff ff ff ff ff ff ff ff
- [0x00000140] ff ff ff ff ff ff ff ff
- [0x00000148] ff ff ff ff ff ff ff ff
- [0x00000150] ff ff ff ff ff ff ff ff
- [0x00000158] ff ff ff ff ff ff ff ff
- [0x00000160] ff ff ff ff ff ff ff ff
- [0x00000168] ff ff ff ff ff ff ff ff
- [0x00000170] ff ff ff ff ff ff ff ff
- [0x00000178] ff ff ff ff ff ff ff ff
- [0x00000180] ff ff ff ff ff ff ff ff
- [0x00000188] ff ff ff ff ff ff ff ff
- [0x00000190] ff ff ff ff ff ff ff ff
- [0x00000198] ff ff ff ff ff ff ff ff
- [0x000001a0] ff ff ff ff ff ff ff ff
- [0x000001a8] ff ff ff ff ff ff ff ff
- [0x000001b0] ff ff ff ff ff ff ff ff
- [0x000001b8] 90 4b 7d 01 00 00 00 be
- [0x000001c0] 33 0c 0c 61 34 2d 00 20
- [0x000001c8] 03 00 00 00 08 00 00 61
- [0x000001d0] 35 2d 83 60 ea b6 00 20
- [0x000001d8] 0b 00 00 d8 dd 00 00 00
- [0x000001e0] 00 00 00 00 00 00 00 00
- [0x000001e8] 00 00 00 00 00 00 00 00
- [0x000001f0] 00 00 00 00 00 00 00 00
- [0x000001f8] 00 00 00 00 00 00 55 aa
- Partition Map for MMC device 1 -- Partition Type: DOS
- Part Start Sector Num Sectors UUID Type
- 1 204800 524288 017d4b90-01 0c
- 2 729088 14538752 017d4b90-02 83
- mmc1 is available
- Interface: MMC
- Device 1: Vendor: Man 000003 Snr 0d102200 Rev: 7.13 Prod: SL08Gā
- Type: Removable Hard Disk
- Capacity: 7580.0 MB = 7.4 GB (15523840 x 512)
- Filesystem: FAT16 "BPI-BOOT "
- Boot from SD
- reading bananapi/bpi-r2/linux/uEnv.txt
- 771 bytes read in 8 ms (93.8 KiB/s)
- Loaded environment from uEnv.txt
- Banana Pi bpi-r2 chip: mt7623n Service: linux
- reading bananapi/bpi-r2/linux/uImage
- 5026201 bytes read in 645 ms (7.4 MiB/s)
- reading bananapi/berryboot.img
- ** Unable to read file bananapi/berryboot.img **
- bootm flag=0, states=70f
- ## Booting kernel from Legacy Image at 84000000 ...
- Image Name: Linux-4.4.59-BPI-R2-Kernel
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5026137 Bytes = 4.8 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.4.59-BPI-R2-Kernel (root@gary) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP Mon Jun 5 22:28:14 CST 2017
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Banana Pi BPI-R2 (MediaTek MT7623N 20170301)
- [ 0.000000] cma: Reserved 64 MiB at 0xfb800000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524287
- [ 0.000000] free_area_init_node: node 0, pgdat c0a8e200, node_mem_map df7f9000
- [ 0.000000] Normal zone: 1040 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 133120 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 391167 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @df7a7000 s21888 r8192 d23168 u53248
- [ 0.000000] pcpu-alloc: s21888 r8192 d23168 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523247
- [ 0.000000] Kernel command line: board=bpi-r2 console=earlyprintk console=tty1 fbcon=map:0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait service=linux vmalloc=496M debug=7 initcall_debug=0
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 2003288K/2097148K available (6793K kernel code, 522K rwdata, 2340K rodata, 556K init, 344K bss, 28324K reserved, 65536K cma-reserved, 1499132K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xe1000000 - 0xff800000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc06aa724 (6794 kB)
- [ 0.000000] .init : 0xc0987000 - 0xc0a12000 ( 556 kB)
- [ 0.000000] .data : 0xc0a12000 - 0xc0a94ad0 ( 523 kB)
- [ 0.000000] .bss : 0xc0a96000 - 0xc0aec228 ( 345 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 13.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
- [ 0.000006] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
- [ 0.000017] Switching to timer-based delay loop, resolution 76ns
- [ 0.000206] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns
- [ 0.000636] Console: colour dummy device 80x30
- [ 0.001372] console [tty1] enabled
- [ 0.001409] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
- [ 0.001452] pid_max: default: 32768 minimum: 301
- [ 0.001582] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001611] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.002235] CPU: Testing write buffer coherency: ok
- [ 0.002291] ftrace: allocating 25064 entries in 74 pages
- [ 0.039326] /cpus/cpu@0 missing clock-frequency property
- [ 0.039377] /cpus/cpu@1 missing clock-frequency property
- [ 0.039404] /cpus/cpu@2 missing clock-frequency property
- [ 0.039431] /cpus/cpu@3 missing clock-frequency property
- [ 0.039453] CPU0: update cpu_capacity 1024
- [ 0.039472] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.039570] Setting up static identity map for 0x80008280 - 0x800082d8
- [ 0.041115] CPU1: update cpu_capacity 1024
- [ 0.041121] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.041539] CPU2: update cpu_capacity 1024
- [ 0.041544] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.041943] CPU3: update cpu_capacity 1024
- [ 0.041948] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.042007] Brought up 4 CPUs
- [ 0.042124] SMP: Total of 4 processors activated (104.00 BogoMIPS).
- [ 0.042143] CPU: All CPU(s) started in SVC mode.
- [ 0.042197] CPU3: update max cpu_capacity 1024
- [ 0.043116] devtmpfs: initialized
- [ 0.049691] CPU0: update max cpu_capacity 1024
- [ 0.049973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
- [ 0.050275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.050328] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.052925] pinctrl core: initialized pinctrl subsystem
- [ 0.053766] NET: Registered protocol family 16
- [ 0.055340] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.065371] irq: no irq domain found for /pinctrl@10005000 !
- [ 0.066157] No ATAGs?
- [ 0.066193] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.066232] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.104378] iommu: Adding device 14007000.ovl to group 0
- [ 0.104458] iommu: Adding device 14008000.rdma to group 0
- [ 0.104509] iommu: Adding device 14009000.wdma to group 0
- [ 0.104565] iommu: Adding device 14012000.rdma to group 0
- [ 0.104960] vgaarb: loaded
- [ 0.105301] SCSI subsystem initialized
- [ 0.105571] usbcore: registered new interface driver usbfs
- [ 0.105659] usbcore: registered new interface driver hub
- [ 0.105744] usbcore: registered new device driver usb
- [ 0.106170] Linux cec interface: v0.10
- [ 0.107183] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.108261] clocksource: Switched to clocksource arch_sys_counter
- [ 0.155793] NET: Registered protocol family 2
- [ 0.156405] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.156471] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.156545] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.156629] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.156672] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.156862] NET: Registered protocol family 1
- [ 0.157181] RPC: Registered named UNIX socket transport module.
- [ 0.157208] RPC: Registered udp transport module.
- [ 0.157226] RPC: Registered tcp transport module.
- [ 0.157243] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.157276] PCI: CLS 0 bytes, default 64
- [ 0.160045] audit: initializing netlink subsys (disabled)
- [ 0.160111] audit: type=2000 audit(0.140:1): initialized
- [ 0.170484] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.170835] fuse init (API version 7.23)
- [ 0.174415] bounce: pool size: 64 pages
- [ 0.174647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.174684] io scheduler noop registered
- [ 0.174706] io scheduler deadline registered
- [ 0.174749] io scheduler cfq registered (default)
- [ 0.176460] mediatek-mt2701-pinctrl 1000b000.pinctrl: invalid function 3 on pin 208 .
- [ 0.298171] mt2701-pcie 1a000000.pcie: mtk_pcie_preinit: PCIE0 link up
- [ 0.298204] mt2701-pcie 1a000000.pcie: PCIE0 Setup OK
- [ 0.298229] mt2701-pcie 1a000000.pcie: BAR0 at bus 0, slot 0, val 0x80000000
- [ 0.298443] mt2701-pcie 1a000000.pcie: PCI host bridge to bus 0000:00
- [ 0.298475] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 0.298501] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.298523] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.298579] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400
- [ 0.298633] pci 0000:00:00.0: reg 0x10: [mem 0x80000000-0xffffffff]
- [ 0.298664] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
- [ 0.298757] pci 0000:00:00.0: supports D1
- [ 0.298779] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.299055] PCI: bus0: Fast back to back transfers disabled
- [ 0.299084] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.299280] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
- [ 0.299356] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x0007]
- [ 0.299391] pci 0000:01:00.0: reg 0x14: [io 0x0000-0x0003]
- [ 0.299425] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x0007]
- [ 0.299458] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x0003]
- [ 0.299492] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x001f]
- [ 0.299526] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
- [ 0.299561] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.299847] PCI: bus1: Fast back to back transfers disabled
- [ 0.299874] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 0.299948] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 0.299973] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 0.299999] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 0.300025] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 0.300057] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 0.300086] pci 0000:00:00.0: BAR 7: assigned [io 0x0000-0x0fff]
- [ 0.300115] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
- [ 0.300148] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
- [ 0.300177] pci 0000:01:00.0: BAR 4: assigned [io 0x0000-0x001f]
- [ 0.300205] pci 0000:01:00.0: BAR 0: assigned [io 0x0020-0x0027]
- [ 0.300234] pci 0000:01:00.0: BAR 2: assigned [io 0x0028-0x002f]
- [ 0.300262] pci 0000:01:00.0: BAR 1: assigned [io 0x0030-0x0033]
- [ 0.300290] pci 0000:01:00.0: BAR 3: assigned [io 0x0034-0x0037]
- [ 0.300319] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.300343] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 0.300369] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 0.300395] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 0.300460] mt2701-pcie 1a000000.pcie: ==>mtk_pcie_probe done
- [ 0.355294] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.357201] console [ttyS0] disabled
- [ 0.377423] 11004000.serial: ttyS0 at MMIO 0x11004000 (irq = 27, base_baud = 1625000) is a ST16650V2
- [ 1.322177] console [ttyS0] enabled
- [ 1.326185] [drm] Initialized drm 1.1.0 20060810
- [ 1.331039] mediatek-ddp 1400e000.mutex: Failed to get clock
- [ 1.337014] mediatek-disp-ovl 14007000.ovl: Failed to initialize component: -517
- [ 1.344715] mediatek-disp-rdma 14008000.rdma: Failed to initialize component: -517
- [ 1.352365] mediatek-disp-rdma 14012000.rdma: Failed to initialize component: -517
- [ 1.360300] mediatek-dpi 14014000.dpi: Failed to get engine clock: -517
- [ 1.367880] mediatek-drm 14000000.dispsys: Adding component match for /ovl@14007000
- [ 1.375560] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14008000
- [ 1.384329] mediatek-hdmi-phy 10209100.hdmi-phy: Using default TX DRV impedance: 4.2k/36
- [ 1.394009] [drm] hdmi-audio-codec driver bound to HDMI
- [ 1.399276] mediatek-drm-hdmi 14015000.hdmi: Failed to get clocks: -517
- [ 1.406136] Mali: ERR: drivers/gpu/arm/mali/linux/mali_kernel_linux.c
- [ 1.412563] mali_probe() 523
- mali_probe(): Failed to initialize platform device.
- [ 1.422053] Mali: Mali device driver loaded
- [ 1.432337] loop: module loaded
- [ 1.437269] nbd: registered device at major 43
- [ 1.449134] mt_usb 11200000.usb: Cannot get usb power from the device tree!
- [ 1.449134]
- [ 1.457718] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 1.464610] mt6323-regulator mt6323-regulator: Chip ID = 0x2023
- [ 1.478934] SCSI Media Changer driver v0.25
- [ 1.484210] libphy: Fixed MDIO Bus: probed
- [ 1.489744] usbcore: registered new interface driver asix
- [ 1.495188] usbcore: registered new interface driver ax88179_178a
- [ 1.501334] usbcore: registered new interface driver cdc_ether
- [ 1.507201] usbcore: registered new interface driver smsc95xx
- [ 1.512984] usbcore: registered new interface driver net1080
- [ 1.518682] usbcore: registered new interface driver cdc_subset
- [ 1.524616] usbcore: registered new interface driver zaurus
- [ 1.530270] usbcore: registered new interface driver cdc_ncm
- [ 1.536295] 1a1c0000.usb supply vbus not found, using dummy regulator
- [ 1.542845] xhci-mtk 1a1c0000.usb: fail to get sys_ck
- [ 1.548085] 1a240000.usb supply vbus not found, using dummy regulator
- [ 1.554637] xhci-mtk 1a240000.usb: fail to get sys_ck
- [ 1.559917] usbcore: registered new interface driver usb-storage
- [ 1.566475] mousedev: PS/2 mouse device common for all mice
- [ 1.574835] IR NEC protocol handler initialized
- [ 1.579389] IR RC5(x/sz) protocol handler initialized
- [ 1.584418] IR RC6 protocol handler initialized
- [ 1.588954] IR JVC protocol handler initialized
- [ 1.593462] IR Sony protocol handler initialized
- [ 1.598053] IR SANYO protocol handler initialized
- [ 1.602748] IR Sharp protocol handler initialized
- [ 1.607429] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.613243] IR XMP protocol handler initialized
- [ 1.617993] MTK_WDT_NONRST_REG(0)
- [ 1.621979] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
- [ 1.631080] msdc_drv_probe!
- [ 1.633939] mtk-msdc 11240000.mmc: Got CD GPIO
- [ 1.679183] usbcore: registered new interface driver usbhid
- [ 1.684733] usbhid: USB HID core driver
- [ 1.716949] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.728918] mmc0: new high speed SDHC card at address aaaa
- [ 1.734841] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
- [ 1.740666] mmcblk0: p1 p2
- [ 1.837698] mt8521p-audio mediatek,mt7623_audio: mt8521p_audio_probe()
- [ 1.844229] mt8521p_audio_probe set dev name mt8521p-audio
- [ 1.849898] mt8521p_dai_probe()
- [ 1.853024] mt8521p_dai_probe set dev name mt8521p-dai
- [ 1.858370] dummy_codec_probe set dev name dummy-codec
- [ 1.864017] asrc_mod_init()
- [ 1.876765] audrtc_mod_init()
- [ 1.880115] mt7623_wm8960_probe()
- [ 1.883483] afe_base_address = 0xe14fc000 from 0x11220000
- [ 1.888907] topckgen_base_address = 0xe14fa000
- [ 1.893327] cmsys_base_address = 0xe1f2c000
- [ 1.897484] infracfg_base_address = 0xe1f2e000
- [ 1.901917] pctrl_base_address = 0xe1f30000
- [ 1.906075] afe_sram_address = 0xe1f40000 from 0x112a0000
- [ 1.911451] mt_afe_init_clock
- [ 1.916193] mt8521p_gpio_probe
- [ 1.919259] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 1.925574] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 1.933201] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 1.940827] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 1.948095] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 1.955374] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 1.962474] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 1.969588] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 1.977202] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 1.984916] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 1.992555] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 2.000308] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 2.010112] NET: Registered protocol family 10
- [ 2.015295] sit: IPv6 over IPv4 tunneling driver
- [ 2.020617] NET: Registered protocol family 17
- [ 2.025254] ThumbEE CPU extension supported.
- [ 2.029538] Registering SWP/SWPB emulation handler
- [ 2.036126] mtk-iommu 10205000.mmsys_iommu: bound 14010000.larb (ops mtk_smi_larb_component_ops)
- [ 2.044910] mtk-iommu 10205000.mmsys_iommu: bound 16010000.larb (ops mtk_smi_larb_component_ops)
- [ 2.053668] mtk-iommu 10205000.mmsys_iommu: bound 15001000.larb (ops mtk_smi_larb_component_ops)
- [ 2.063410] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000
- [ 2.071067] mediatek-drm 14000000.dispsys: Adding component match for /ovl@14007000
- [ 2.078731] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14008000
- [ 2.086724] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14012000
- [ 2.094465] mediatek-drm 14000000.dispsys: Adding component match for /dpi@14014000
- [ 2.103199] mali-utgard 13040000.mali: power_table 0/4 (107250000, 1150000, 280)
- [ 2.110585] mali-utgard 13040000.mali: power_table 1/4 (214500000, 1150000, 560)
- [ 2.117945] mali-utgard 13040000.mali: power_table 2/4 (312000000, 1150000, 815)
- [ 2.125315] mali-utgard 13040000.mali: power_table 3/4 (416000000, 1150000, 1087)
- [ 2.132897] mali-utgard 13040000.mali: mali_set_initial_clock [3] 416000000
- [ 2.142277] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
- [ 2.149710] musb probe
- [ 2.152185] musb probe reg: 0xe1fa8000 ,0xe1faa000 , irq: 35
- [ 2.171360] musb core probe done base 0xe1faa000
- [ 2.177112] libphy: mdio: probed
- [ 2.616471] mt7530 reset completed!!
- [ 2.620897] mt7623-gsw gswsys@1b100000: mac [0] is fixed link
- [ 2.626612] mt7623-gsw gswsys@1b100000: mac [1] is not fixed link
- [ 2.632853] mt7623-gsw gswsys@1b100000: Setting MHWTRAP to 0x0101fedf
- [ 2.670857] MT7530 0th bit Tap_a = 0
- [ 2.675047] MT7530 1th bit Tap_a = 0
- [ 2.679247] MT7530 2th bit Tap_a = 0
- [ 2.683435] MT7530 3th bit Tap_a = 0
- [ 2.687621] MT7530 4th bit Tap_a = 0
- [ 2.759386] MT7530 0th bit Tap_b = 128
- [ 2.831387] MT7530 1th bit Tap_b = 128
- [ 2.903411] MT7530 2th bit Tap_b = 128
- [ 2.975427] MT7530 3th bit Tap_b = 128
- [ 3.047448] MT7530 4th bit Tap_b = 128
- [ 3.241775] mt7623_gsw_config> LLLLL
- [ 3.249845] mt7623_gsw_config<
- [ 3.252930] mtk_eth_soc 1b100000.ethernet: generated random MAC address 36:c9:26:21:94:72
- [ 3.338169] mtk_eth_soc 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
- [ 3.349125] mtk_eth_soc 1b100000.ethernet eth0: mediatek frame engine at 0xe2000000, irq 60
- [ 3.357465] mtk_eth_soc 1b100000.ethernet: generated random MAC address aa:b4:02:89:4a:08
- [ 3.438251] mtk_eth_soc 1b100000.ethernet: connected mac 1 to PHY at mdio-bus:05 [uid=00000000, driver=Generic PHY]
- [ 3.449338] mtk_eth_soc 1b100000.ethernet eth1: mediatek frame engine at 0xe2000000, irq 60
- [ 3.457650] netif_napi_add() called with weight 128 on device
- [ 3.463818] 1a1c0000.usb supply vbus not found, using dummy regulator
- [ 3.470640] xhci-mtk 1a1c0000.usb: xHCI Host Controller
- [ 3.475859] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1
- [ 3.483777] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
- [ 3.492179] xhci-mtk 1a1c0000.usb: irq 58, io mem 0x1a1c0000
- [ 3.498690] hub 1-0:1.0: USB hub found
- [ 3.502463] hub 1-0:1.0: 1 port detected
- [ 3.506728] xhci-mtk 1a1c0000.usb: xHCI Host Controller
- [ 3.511957] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2
- [ 3.519404] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.528126] hub 2-0:1.0: USB hub found
- [ 3.531908] hub 2-0:1.0: 1 port detected
- [ 3.536423] 1a240000.usb supply vbus not found, using dummy regulator
- [ 3.543245] xhci-mtk 1a240000.usb: xHCI Host Controller
- [ 3.548487] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3
- [ 3.556377] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
- [ 3.564763] xhci-mtk 1a240000.usb: irq 59, io mem 0x1a240000
- [ 3.571183] hub 3-0:1.0: USB hub found
- [ 3.574951] hub 3-0:1.0: 1 port detected
- [ 3.579222] xhci-mtk 1a240000.usb: xHCI Host Controller
- [ 3.584428] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4
- [ 3.591878] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.600713] hub 4-0:1.0: USB hub found
- [ 3.604475] hub 4-0:1.0: 1 port detected
- [ 3.611269] mt7623_wm8960_probe()
- [ 3.614650] afe_base_address = 0xe1ffc000 from 0x11220000
- [ 3.620084] topckgen_base_address = 0xe2036000
- [ 3.624505] cmsys_base_address = 0xe2038000
- [ 3.628681] infracfg_base_address = 0xe203a000
- [ 3.633100] pctrl_base_address = 0xe203c000
- [ 3.637255] afe_sram_address = 0xe2080000 from 0x112a0000
- [ 3.642630] mt_afe_init_clock
- [ 3.647381] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 3.653969] mt8521p_gpio_probe
- [ 3.657019] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 3.663345] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 3.670970] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 3.678597] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 3.685865] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 3.693144] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 3.700250] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 3.707339] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 3.714965] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 3.722675] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 3.730299] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 3.738042] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 3.746771] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000
- [ 3.753710] mediatek-drm 14000000.dispsys: bound 14007000.ovl (ops mtk_disp_ovl_component_ops)
- [ 3.762335] mediatek-drm 14000000.dispsys: bound 14008000.rdma (ops mtk_disp_rdma_component_ops)
- [ 3.771094] mediatek-drm 14000000.dispsys: bound 14012000.rdma (ops mtk_disp_rdma_component_ops)
- [ 3.807615] mediatek-cec 10012000.cec: phy_addr is 0x2000
- [ 3.813037] mediatek-drm 14000000.dispsys: bound 14014000.dpi (ops mtk_dpi_component_ops)
- [ 3.821240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.827812] [drm] No driver support for vblank timestamp query.
- [ 3.834612] mt7623_wm8960_probe()
- [ 3.837961] afe_base_address = 0xe2074000 from 0x11220000
- [ 3.843388] topckgen_base_address = 0xe2078000
- [ 3.847808] cmsys_base_address = 0xe207a000
- [ 3.852001] infracfg_base_address = 0xe207c000
- [ 3.856425] pctrl_base_address = 0xe20b0000
- [ 3.860596] afe_sram_address = 0xe20c0000 from 0x112a0000
- [ 3.865961] mt_afe_init_clock
- [ 3.870708] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 3.877281] mt8521p_gpio_probe
- [ 3.880352] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 3.886666] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 3.894291] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 3.901914] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 3.909193] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 3.916462] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 3.923559] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 3.930657] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 3.938279] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 3.945978] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 3.953600] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 3.961340] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 3.968194] usb 3-1: new full-speed USB device number 2 using xhci-mtk
- [ 3.968225] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
- [ 3.990214] usb-storage 2-1:1.0: USB Mass Storage device detected
- [ 3.994868] vemc3v3: disabling
- [ 3.994886] vgp1: disabling
- [ 3.994920] vcamaf: disabling
- [ 3.995470] ALSA device list:
- [ 3.995472] No soundcards found.
- [ 4.011996] scsi host0: usb-storage 2-1:1.0
- [ 4.016824] mt7623_wm8960_probe()
- [ 4.020247] afe_base_address = 0xe20e4000 from 0x11220000
- [ 4.025679] topckgen_base_address = 0xe20e8000
- [ 4.026371] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
- [ 4.026412] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 4.033915] devtmpfs: mounted
- [ 4.034473] Freeing unused kernel memory: 556K (c0987000 - c0a12000)
- [ 4.034475] This architecture does not have kernel memory protection.
- [ 4.060049] cmsys_base_address = 0xe20ea000
- [ 4.064224] infracfg_base_address = 0xe20ec000
- [ 4.068675] pctrl_base_address = 0xe20f0000
- [ 4.072844] afe_sram_address = 0xe2100000 from 0x112a0000
- [ 4.078231] mt_afe_init_clock
- [ 4.083001] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 4.089604] mt8521p_gpio_probe
- [ 4.092668] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 4.099003] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 4.106620] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 4.114274] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 4.121566] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 4.122108] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 4.125011] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/1a240000.usb/usb3/3-1/3-1:1.0/0003:062A:4101.0001/input/input0
- [ 4.149677] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 4.156779] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 4.163897] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 4.171537] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 4.178428] hid-generic 0003:062A:4101.0001: input: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-1a240000.usb-1/input0
- [ 4.182476] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/1a240000.usb/usb3/3-1/3-1:1.1/0003:062A:4101.0002/input/input1
- [ 4.203804] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 4.211458] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 4.219253] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 4.228083] mt7623_wm8960_probe()
- [ 4.231529] afe_base_address = 0xe20fc000 from 0x11220000
- [ 4.236948] topckgen_base_address = 0xe218a000
- [ 4.238561] hid-generic 0003:062A:4101.0002: input: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-1a240000.usb-1/input1
- [ 4.253534] cmsys_base_address = 0xe218c000
- [ 4.257710] infracfg_base_address = 0xe218e000
- [ 4.262163] pctrl_base_address = 0xe2190000
- [ 4.266323] afe_sram_address = 0xe21c0000 from 0x112a0000
- [ 4.271724] mt_afe_init_clock
- [ 4.276462] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 4.283066] mt8521p_gpio_probe
- [ 4.286124] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 4.292486] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 4.292504] systemd[1]: System time before build time, advancing clock.
- [ 4.306705] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 4.314354] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 4.321644] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 4.328933] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 4.336025] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 4.343130] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 4.350779] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 4.358525] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 4.363064] random: systemd: uninitialized urandom read (16 bytes read, 8 bits of entropy available)
- [ 4.375247] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 4.375293] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 4.375686] mt7623_wm8960_probe()
- [ 4.375759] afe_base_address = 0xe2194000 from 0x11220000
- [ 4.375827] topckgen_base_address = 0xe2198000
- [ 4.375833] cmsys_base_address = 0xe219a000
- [ 4.375836] infracfg_base_address = 0xe219c000
- [ 4.375840] pctrl_base_address = 0xe21a0000
- [ 4.375843] afe_sram_address = 0xe2200000 from 0x112a0000
- [ 4.375846] mt_afe_init_clock
- [ 4.377616] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 4.377618] mt8521p_gpio_probe
- [ 4.377631] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 4.377635] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 4.377638] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 4.377641] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 4.377643] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 4.377646] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 4.377649] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 4.377652] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 4.377655] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 4.377658] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 4.377661] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 4.377688] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 4.525682] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 4.544410] systemd[1]: Detected architecture arm.
- Welcome to Ubuntu 16.04.2 LTS!
- [ 4.583082] systemd[1]: Set hostname to <bpi-iot-ros-ai>.
- [ 4.606566] random: systemd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
- [ 4.624055] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
- [ 4.634407] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
- [ 4.660352] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
- [ 4.676697] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
- [ 4.785574] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
- [ 4.831522] random: systemd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
- [ 4.840985] random: systemd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
- [ 4.851388] random: systemd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
- [ 5.008864] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
- [ 5.017829] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 5.018044] mt7623_wm8960_probe()
- [ 5.018119] afe_base_address = 0xe21b8000 from 0x11220000
- [ 5.018233] topckgen_base_address = 0xe219e000
- [ 5.018239] cmsys_base_address = 0xe21b6000
- [ 5.018243] infracfg_base_address = 0xe21bc000
- [ 5.018247] pctrl_base_address = 0xe21e4000
- [ 5.018250] afe_sram_address = 0xe2240000 from 0x112a0000
- [ 5.018254] mt_afe_init_clock
- [ 5.020039] mt_afe_debug_init failed to create mtksocaudio debugfs file
- [ 5.020041] mt8521p_gpio_probe
- [ 5.020056] mt8521p_gpio_probe pinctrl_lookup_state default fail -19
- [ 5.020060] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode0-gpio fail -19
- [ 5.020063] mt8521p_gpio_probe pinctrl_lookup_state audi2s0lrck-mode1-i2s0 fail -19
- [ 5.020066] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode1-i2s2 fail -19
- [ 5.020069] mt8521p_gpio_probe pinctrl_lookup_state audi2s2-mode4-dmic fail -19
- [ 5.020072] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode1-pcm fail -19
- [ 5.020075] mt8521p_gpio_probe pinctrl_lookup_state audpcm-mode2-mrg fail -19
- [ 5.020078] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode0-gpio fail -19
- [ 5.020080] mt8521p_gpio_probe pinctrl_lookup_state audspdifin0-mode1-spdif fail -19
- [ 5.020083] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode0-gpio fail -19
- [ 5.020086] mt8521p_gpio_probe pinctrl_lookup_state audspdifin1-mode1-spdif fail -19
- [ 5.020136] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ 5.027509] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 5.027904] sd 0:0:0:0: [sda] Write Protect is off
- [ 5.027914] sd 0:0:0:0: [sda] Mode Sense: 33 00 00 08
- [ 5.028248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.037539] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 5.070476] systemd[1]: Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems (Pre).
- [ 5.208631] systemd[1]: Started Trigger resolvconf update for networkd DNS.
- [ OK ] Started Trigger resolvconf update for networkd DNS.
- [ 5.238334] systemd[1]: Reached target User and Group Name Lookups.
- [ OK ] Reached target User and Group Name Lookups.
- [ 5.268543] systemd[1]: Created slice System Slice.
- [ OK ] Created slice System Slice.
- [ 5.288517] systemd[1]: Listening on udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 5.318505] systemd[1]: Listening on Syslog Socket.
- [ OK ] Listening on Syslog Socket.
- [ 5.338480] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ 5.368388] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 5.398362] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ 5.428286] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ 5.458289] systemd[1]: Reached target Encrypted Volumes.
- [ OK ] Reached target Encrypted Volumes.
- [ 5.478369] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 5.498431] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 5.526306] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 5.551695] systemd[1]: Starting Restore / save the current clock...
- Starting Restore / save the current clock...
- [ 5.580227] systemd[1]: Started Read required files in advance.
- [ OK ] Started Read required files in advance.
- [ 5.653386] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required st... nodes for the current kernel...
- [ 5.690100] systemd[1]: Starting Nameserver information manager...
- Starting Nameserver information manager...
- [ 5.720225] systemd[1]: Started Braille Device Support.
- [ OK ] Started Braille Device Support.
- [ 5.750635] systemd[1]: Mounting Debug File System...
- Mounting Debug File System...
- [ 5.778454] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 5.798790] systemd[1]: Listening on Journal Audit Socket.
- [ OK ] Listening on Journal Audit Socket.
- [ 5.830220] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ 5.848564] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ 5.878709] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 5.908468] systemd[1]: Reached target Slices.
- [ OK ] Reached target Slices.
- [ 5.930118] systemd[1]: Starting Set console keymap...
- Starting Set console keymap...
- [ 5.960233] systemd[1]: Starting Uncomplicated firewall...
- Starting Uncomplicated firewall...
- [ 5.988743] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ 6.020793] systemd[1]: Mounted Debug File System.
- [ OK ] Mounted Debug File System.
- [ 6.048786] systemd[1]: Started Journal Service.
- [ OK ] Started Journal Service.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Create list of required sta...ce nodes for the current kernel.
- [ 6.141774] mt7623-gsw gswsys@1b100000: port 3 link up
- [ OK ] Started Set console keymap.
- [ OK ] Started Uncomplicated firewall.
- [ OK ] Started Nameserver information manager.
- [ OK ] Reached target Network (Pre).
- Starting Create Static Device Nodes in /dev...
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- Mounting FUSE Control File System...
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Mounted Configuration File System.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Apply Kernel Variables.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- Starting File System Check on Root Device...
- [ OK ] Started File System Check Daemon to report status.
- [ OK ] Started File System Check on Root Device.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Started Remount Root and Kernel File Systems.
- Starting udev Coldplug all Devices...
- Starting Flush Journal to Persistent Storage...
- Starting Load/Save Random Seed...
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Tell Plymouth To Write Out Runtime Data...
- Starting LSB: AppArmor initialization...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Tell Plymouth To Write Out Runtime Data.
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started LSB: AppArmor initialization.
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Reached target System Time Synchronized.
- Starting Raise network interfaces...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started udev Coldplug all Devices.
- [ 7.731030] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
- [ 8.248442] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- [ OK ] Listening on UUID daemon activation socket.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Started Daily apt activities.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Listening on CUPS Scheduler.
- [ OK ] Reached target Sockets.
- [ OK ] Started CUPS Scheduler.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Basic System.
- Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
- [ OK ] Started Run anacron jobs.
- Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
- Starting Modem Manager...
- Starting Login Service...
- Starting LSB: Banana Pi init script...
- Starting LSB: Autogenerate and use a swap file...
- Starting LSB: Speech Dispatcher...
- Starting LSB: automatic crash report generation...
- [ OK ] Started crash report submission daemon.
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started Avahi DNS Configuration Daemon.
- Starting Permit User Sessions...
- [ OK ] Started CUPS Scheduler.
- Starting System Logging Service...
- Starting Avahi mDNS/DNS-SD Stack...
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started Make remote CUPS printers available locally.
- Starting Network Manager...
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ 9.594093] mt7623-wm8960-machine 11220000.sound: ASoC: CODEC DAI wm8960-hifi not registered
- Starting LSB: daemon to balance interrupts for SMP systems...
- Starting SSH key generation on first startup...
- Starting Accounts Service...
- [ OK ] Started Deferred execution scheduler.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started System Logging Service.
- [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
- [ OK ] Started Permit User Sessions.
- [ OK ] Started LSB: daemon to balance interrupts for SMP systems.
- [ OK ] Started SSH key generation on first startup.
- [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
- [ OK ] Started LSB: Banana Pi init script.
- [ OK ] Started LSB: Speech Dispatcher.
- [ OK ] Started LSB: automatic crash report generation.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started LSB: Autogenerate and use a swap file.
- [ OK ] Started Network Manager.
- [ OK ] Started Login Service.
- Starting Network Manager Script Dispatcher Service...
- Starting Network Manager Wait Online...
- Starting Authenticate and Authorize Users to Run Privileged Tasks...
- [ OK ] Reached target Network.
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting OpenBSD Secure Shell server...
- Starting Light Display Manager...
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Accounts Service.
- Starting Hostname Service...
- [ OK ] Started Modem Manager.
- [ OK ] Started Light Display Manager.
- [ OK ] Started Hostname Service.
- [ 11.775294] vgaarb: this pci device is not a vga device
- [ 13.044906] vgaarb: this pci device is not a vga device
- [ OK ] Created slice User Slice of pi.
- Starting User Manager for UID 1000...
- [ OK ] Started Session c1 of user pi.
- [ OK ] Started User Manager for UID 1000.
- Starting RealtimeKit Scheduling Policy Service...
- [ OK ] Started RealtimeKit Scheduling Policy Service.
- Starting Disk Manager...
- [ OK ] Started Disk Manager.
- Starting Daemon for power management...
- [ OK ] Started Daemon for power management.
- [FAILED] Failed to start Network Manager Wait Online.
- See 'systemctl status NetworkManager-wait-online.service' for details.
- [ OK ] Reached target Network is Online.
- Starting LSB: Start NTP daemon...
- Starting /etc/rc.local Compatibility...
- Starting LSB: disk temperature monitoring daemon...
- Starting LSB: Start xrdp and sesman daemons...
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Started LSB: Start NTP daemon.
- [ OK ] Started /etc/rc.local Compatibility.
- Starting Hold until boot process finishes up...
- [ OK ] Started Hold until boot process finishes up.
- [ OK ] Started LSB: Start xrdp and sesman daemons.
- Starting Set console scheme...
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- [ OK ] Started Stop ureadahead data collection 45s after completed startup.
- [ OK ] Started TLP system startup/shutdown.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Set console scheme.
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 16.04.2 LTS bpi-iot-ros-ai ttyS0
- bpi-iot-ros-ai login: root
- Password:
- Last login: Tue May 23 15:20:27 CST 2017 on ttyS0
- Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.4.59-BPI-R2-Kernel armv7l)
- * Documentation: https://help.ubuntu.com
- * Management: https://landscape.canonical.com
- * Support: https://ubuntu.com/advantage
- 0 packages can be updated.
- 0 updates are security updates.
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# lsusb
- Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
- Bus 003 Device 002: ID 062a:4101 Creative Labs Wireless Keyboard/Mouse
- Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 002 Device 002: ID 0781:5580 SanDisk Corp. SDCZ80 Flash Drive
- Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# fdisk -l
- Disk /dev/mmcblk0: 7.4 GiB, 7948206080 bytes, 15523840 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x017d4b90
- Device Boot Start End Sectors Size Id Type
- /dev/mmcblk0p1 204800 729087 524288 256M c W95 FAT32 (LBA)
- /dev/mmcblk0p2 729088 15267839 14538752 7G 83 Linux
- Disk /dev/sda: 29.8 GiB, 32017047552 bytes, 62533296 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk /dev/sdb: 298.1 GiB, 320072933376 bytes, 625142448 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# dd if=/dev/zero of=/dev/sda bs=1M count=512
- 512+0 records in
- 512+0 records out
- 536870912 bytes (537 MB, 512 MiB) copied, 5.75219 s, 93.3 MB/s
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# lspci
- 00:00.0 PCI bridge: MEDIATEK Corp. Device 0801 (rev 01)
- 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# dd if=/dev/zero of=/dev/sdb bs=1M count=512
- 512+0 records in
- 512+0 records out
- 536870912 bytes (537 MB, 512 MiB) copied, 8.23068 s, 65.2 MB/s
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# ifconfig eth0
- eth0 Link encap:Ethernet HWaddr 36:c9:26:21:94:72
- inet6 addr: fe80::5977:5b53:dc87:17bf/64 Scope:Link
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:264 errors:0 dropped:0 overruns:0 frame:0
- TX packets:83 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:24734 (24.7 KB) TX bytes:16376 (16.3 KB)
- Interrupt:60
- root@bpi-iot-ros-ai:~# ifconfig eth0 192.168.0.1 up
- root@bpi-iot-ros-ai:~#
- root@bpi-iot-ros-ai:~# ping 192.168.0.2
- PING 192.168.0.2 (192.168.0.2) 56(84) bytes of data.
- 64 bytes from 192.168.0.2: icmp_seq=1 ttl=128 time=2.17 ms
- 64 bytes from 192.168.0.2: icmp_seq=2 ttl=128 time=1.03 ms
- 64 bytes from 192.168.0.2: icmp_seq=3 ttl=128 time=1.03 ms
- 64 bytes from 192.168.0.2: icmp_seq=4 ttl=128 time=1.03 ms
- ^C
- --- 192.168.0.2 ping statistics ---
- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms
- rtt min/avg/max/mdev = 1.030/1.318/2.179/0.498 ms
- root@bpi-iot-ros-ai:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement